Skip to content

L
linux-davinci
Commit c305e3d3 authored by Corey Minyard's avatar Corey Minyard Committed by Linus Torvalds
Browse files
Options

IPMI: Style fixes in the system interface code 

Lots of style fixes for the IPMI system interface driver.  No functional
changes.  Basically fixes everything reported by checkpatch and fixes the
comment style.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: default avatarCorey Minyard <cminyard@mvista.com>
Cc: Rocky Craig <rocky.craig@hp.com>
Cc: Hannes Schulz <schulz@schwaar.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent c70d7499
Show whitespace changes
Inline Side-by-side
Showing with 574 additions and 436 deletions
drivers/char/ipmi/ipmi_bt_sm.c
View file @ c305e3d3
......@@ -37,26 +37,32 @@
#define BT_DEBUG_ENABLE 1 /* Generic messages */
#define BT_DEBUG_MSG 2 /* Prints all request/response buffers */
#define BT_DEBUG_STATES 4 /* Verbose look at state changes */
/* BT_DEBUG_OFF must be zero to correspond to the default uninitialized
value */
/*
* BT_DEBUG_OFF must be zero to correspond to the default uninitialized
* value
*/
static int bt_debug; /* 0 == BT_DEBUG_OFF */
module_param(bt_debug, int, 0644);
MODULE_PARM_DESC(bt_debug, "debug bitmask, 1=enable, 2=messages, 4=states");
/* Typical "Get BT Capabilities" values are 2-3 retries, 5-10 seconds,
and 64 byte buffers. However, one HP implementation wants 255 bytes of
buffer (with a documented message of 160 bytes) so go for the max.
Since the Open IPMI architecture is single-message oriented at this
stage, the queue depth of BT is of no concern. */
/*
* Typical "Get BT Capabilities" values are 2-3 retries, 5-10 seconds,
* and 64 byte buffers. However, one HP implementation wants 255 bytes of
* buffer (with a documented message of 160 bytes) so go for the max.
* Since the Open IPMI architecture is single-message oriented at this
* stage, the queue depth of BT is of no concern.
*/
#define BT_NORMAL_TIMEOUT 5 /* seconds */
#define BT_NORMAL_RETRY_LIMIT 2
#define BT_RESET_DELAY 6 /* seconds after warm reset */
/* States are written in chronological order and usually cover
multiple rows of the state table discussion in the IPMI spec. */
/*
* States are written in chronological order and usually cover
* multiple rows of the state table discussion in the IPMI spec.
*/
enum bt_states {
BT_STATE_IDLE = 0, /* Order is critical in this list */
......@@ -76,10 +82,12 @@ enum bt_states {
BT_STATE_LONG_BUSY /* BT doesn't get hosed :-) */
};
/* Macros seen at the end of state "case" blocks. They help with legibility
and debugging. */
/*
* Macros seen at the end of state "case" blocks. They help with legibility
* and debugging.
*/
#define BT_STATE_CHANGE(X,Y) { bt->state = X; return Y; }
#define BT_STATE_CHANGE(X, Y) { bt->state = X; return Y; }
#define BT_SI_SM_RETURN(Y) { last_printed = BT_STATE_PRINTME; return Y; }
......@@ -110,11 +118,13 @@ struct si_sm_data {
#define BT_H_BUSY 0x40
#define BT_B_BUSY 0x80
/* Some bits are toggled on each write: write once to set it, once
more to clear it; writing a zero does nothing. To absolutely
clear it, check its state and write if set. This avoids the "get
current then use as mask" scheme to modify one bit. Note that the
variable "bt" is hardcoded into these macros. */
/*
* Some bits are toggled on each write: write once to set it, once
* more to clear it; writing a zero does nothing. To absolutely
* clear it, check its state and write if set. This avoids the "get
* current then use as mask" scheme to modify one bit. Note that the
* variable "bt" is hardcoded into these macros.
*/
#define BT_STATUS bt->io->inputb(bt->io, 0)
#define BT_CONTROL(x) bt->io->outputb(bt->io, 0, x)
......@@ -125,8 +135,10 @@ struct si_sm_data {
#define BT_INTMASK_R bt->io->inputb(bt->io, 2)
#define BT_INTMASK_W(x) bt->io->outputb(bt->io, 2, x)
/* Convenience routines for debugging. These are not multi-open safe!
Note the macros have hardcoded variables in them. */
/*
* Convenience routines for debugging. These are not multi-open safe!
* Note the macros have hardcoded variables in them.
*/
static char *state2txt(unsigned char state)
{
......@@ -182,7 +194,8 @@ static char *status2txt(unsigned char status)
static unsigned int bt_init_data(struct si_sm_data *bt, struct si_sm_io *io)
{
memset(bt, 0, sizeof(struct si_sm_data));
if (bt->io != io) { /* external: one-time only things */
if (bt->io != io) {
/* external: one-time only things */
bt->io = io;
bt->seq = 0;
}
......@@ -229,7 +242,7 @@ static int bt_start_transaction(struct si_sm_data *bt,
printk(KERN_WARNING "BT: +++++++++++++++++ New command\n");
printk(KERN_WARNING "BT: NetFn/LUN CMD [%d data]:", size - 2);
for (i = 0; i < size; i ++)
printk (" %02x", data[i]);
printk(" %02x", data[i]);
printk("\n");
}
bt->write_data[0] = size + 1; /* all data plus seq byte */
......@@ -246,8 +259,10 @@ static int bt_start_transaction(struct si_sm_data *bt,
return 0;
}
/* After the upper state machine has been told SI_SM_TRANSACTION_COMPLETE
it calls this. Strip out the length and seq bytes. */
/*
* After the upper state machine has been told SI_SM_TRANSACTION_COMPLETE
* it calls this. Strip out the length and seq bytes.
*/
static int bt_get_result(struct si_sm_data *bt,
unsigned char *data,
......@@ -269,10 +284,10 @@ static int bt_get_result(struct si_sm_data *bt,
memcpy(data + 2, bt->read_data + 4, msg_len - 2);
if (bt_debug & BT_DEBUG_MSG) {
printk (KERN_WARNING "BT: result %d bytes:", msg_len);
printk(KERN_WARNING "BT: result %d bytes:", msg_len);
for (i = 0; i < msg_len; i++)
printk(" %02x", data[i]);
printk ("\n");
printk("\n");
}
return msg_len;
}
......@@ -292,8 +307,10 @@ static void reset_flags(struct si_sm_data *bt)
BT_INTMASK_W(BT_BMC_HWRST);
}
/* Get rid of an unwanted/stale response. This should only be needed for
BMCs that support multiple outstanding requests. */
/*
* Get rid of an unwanted/stale response. This should only be needed for
* BMCs that support multiple outstanding requests.
*/
static void drain_BMC2HOST(struct si_sm_data *bt)
{
......@@ -326,8 +343,8 @@ static inline void write_all_bytes(struct si_sm_data *bt)
printk(KERN_WARNING "BT: write %d bytes seq=0x%02X",
bt->write_count, bt->seq);
for (i = 0; i < bt->write_count; i++)
printk (" %02x", bt->write_data[i]);
printk ("\n");
printk(" %02x", bt->write_data[i]);
printk("\n");
}
for (i = 0; i < bt->write_count; i++)
HOST2BMC(bt->write_data[i]);
......@@ -337,8 +354,10 @@ static inline int read_all_bytes(struct si_sm_data *bt)
{
unsigned char i;
/* length is "framing info", minimum = 4: NetFn, Seq, Cmd, cCode.
Keep layout of first four bytes aligned with write_data[] */
/*
* length is "framing info", minimum = 4: NetFn, Seq, Cmd, cCode.
* Keep layout of first four bytes aligned with write_data[]
*/
bt->read_data[0] = BMC2HOST;
bt->read_count = bt->read_data[0];
......@@ -362,8 +381,8 @@ static inline int read_all_bytes(struct si_sm_data *bt)
if (max > 16)
max = 16;
for (i = 0; i < max; i++)
printk (" %02x", bt->read_data[i]);
printk ("%s\n", bt->read_count == max ? "" : " ...");
printk(KERN_CONT " %02x", bt->read_data[i]);
printk(KERN_CONT "%s\n", bt->read_count == max ? "" : " ...");
}
/* per the spec, the (NetFn[1], Seq[2], Cmd[3]) tuples must match */
......@@ -402,8 +421,10 @@ static enum si_sm_result error_recovery(struct si_sm_data *bt,
printk(KERN_WARNING "IPMI BT: %s in %s %s ", /* open-ended line */
reason, STATE2TXT, STATUS2TXT);
/* Per the IPMI spec, retries are based on the sequence number
known only to this module, so manage a restart here. */
/*
* Per the IPMI spec, retries are based on the sequence number
* known only to this module, so manage a restart here.
*/
(bt->error_retries)++;
if (bt->error_retries < bt->BT_CAP_retries) {
printk("%d retries left\n",
......@@ -412,7 +433,7 @@ static enum si_sm_result error_recovery(struct si_sm_data *bt,
return SI_SM_CALL_WITHOUT_DELAY;
}
printk("failed %d retries, sending error response\n",
printk(KERN_WARNING "failed %d retries, sending error response\n",
bt->BT_CAP_retries);
if (!bt->nonzero_status)
printk(KERN_ERR "IPMI BT: stuck, try power cycle\n");
......@@ -424,8 +445,10 @@ static enum si_sm_result error_recovery(struct si_sm_data *bt,
return SI_SM_CALL_WITHOUT_DELAY;
}
/* Concoct a useful error message, set up the next state, and
be done with this sequence. */
/*
* Concoct a useful error message, set up the next state, and
* be done with this sequence.
*/
bt->state = BT_STATE_IDLE;
switch (cCode) {
......@@ -461,10 +484,12 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
last_printed = bt->state;
}
/* Commands that time out may still (eventually) provide a response.
This stale response will get in the way of a new response so remove
it if possible (hopefully during IDLE). Even if it comes up later
it will be rejected by its (now-forgotten) seq number. */
/*
* Commands that time out may still (eventually) provide a response.
* This stale response will get in the way of a new response so remove
* it if possible (hopefully during IDLE). Even if it comes up later
* it will be rejected by its (now-forgotten) seq number.
*/
if ((bt->state < BT_STATE_WRITE_BYTES) && (status & BT_B2H_ATN)) {
drain_BMC2HOST(bt);
......@@ -472,7 +497,8 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
}
if ((bt->state != BT_STATE_IDLE) &&
(bt->state < BT_STATE_PRINTME)) { /* check timeout */
(bt->state < BT_STATE_PRINTME)) {
/* check timeout */
bt->timeout -= time;
if ((bt->timeout < 0) && (bt->state < BT_STATE_RESET1))
return error_recovery(bt,
......@@ -482,8 +508,10 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
switch (bt->state) {
/* Idle state first checks for asynchronous messages from another
channel, then does some opportunistic housekeeping. */
/*
* Idle state first checks for asynchronous messages from another
* channel, then does some opportunistic housekeeping.
*/
case BT_STATE_IDLE:
if (status & BT_SMS_ATN) {
......@@ -531,16 +559,19 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY);
BT_CONTROL(BT_H_BUSY); /* set */
/* Uncached, ordered writes should just proceeed serially but
some BMCs don't clear B2H_ATN with one hit. Fast-path a
workaround without too much penalty to the general case. */
/*
* Uncached, ordered writes should just proceeed serially but
* some BMCs don't clear B2H_ATN with one hit. Fast-path a
* workaround without too much penalty to the general case.
*/
BT_CONTROL(BT_B2H_ATN); /* clear it to ACK the BMC */
BT_STATE_CHANGE(BT_STATE_CLEAR_B2H,
SI_SM_CALL_WITHOUT_DELAY);
case BT_STATE_CLEAR_B2H:
if (status & BT_B2H_ATN) { /* keep hitting it */
if (status & BT_B2H_ATN) {
/* keep hitting it */
BT_CONTROL(BT_B2H_ATN);
BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY);
}
......@@ -548,7 +579,8 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
SI_SM_CALL_WITHOUT_DELAY);
case BT_STATE_READ_BYTES:
if (!(status & BT_H_BUSY)) /* check in case of retry */
if (!(status & BT_H_BUSY))
/* check in case of retry */
BT_CONTROL(BT_H_BUSY);
BT_CONTROL(BT_CLR_RD_PTR); /* start of BMC2HOST buffer */
i = read_all_bytes(bt); /* true == packet seq match */
......@@ -599,8 +631,10 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
BT_STATE_CHANGE(BT_STATE_XACTION_START,
SI_SM_CALL_WITH_DELAY);
/* Get BT Capabilities, using timing of upper level state machine.
Set outreqs to prevent infinite loop on timeout. */
/*
* Get BT Capabilities, using timing of upper level state machine.
* Set outreqs to prevent infinite loop on timeout.
*/
case BT_STATE_CAPABILITIES_BEGIN:
bt->BT_CAP_outreqs = 1;
{
......@@ -638,10 +672,12 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
static int bt_detect(struct si_sm_data *bt)
{
/* It's impossible for the BT status and interrupt registers to be
all 1's, (assuming a properly functioning, self-initialized BMC)
but that's what you get from reading a bogus address, so we
test that first. The calling routine uses negative logic. */
/*
* It's impossible for the BT status and interrupt registers to be
* all 1's, (assuming a properly functioning, self-initialized BMC)
* but that's what you get from reading a bogus address, so we
* test that first. The calling routine uses negative logic.
*/
if ((BT_STATUS == 0xFF) && (BT_INTMASK_R == 0xFF))
return 1;
......@@ -658,8 +694,7 @@ static int bt_size(void)
return sizeof(struct si_sm_data);
}
struct si_sm_handlers bt_smi_handlers =
{
struct si_sm_handlers bt_smi_handlers = {
.init_data = bt_init_data,
.start_transaction = bt_start_transaction,
.get_result = bt_get_result,
......
drivers/char/ipmi/ipmi_kcs_sm.c
View file @ c305e3d3
......@@ -60,37 +60,58 @@ MODULE_PARM_DESC(kcs_debug, "debug bitmask, 1=enable, 2=messages, 4=states");
/* The states the KCS driver may be in. */
enum kcs_states {
KCS_IDLE, /* The KCS interface is currently
doing nothing. */
KCS_START_OP, /* We are starting an operation. The
data is in the output buffer, but
nothing has been done to the
interface yet. This was added to
the state machine in the spec to
wait for the initial IBF. */
KCS_WAIT_WRITE_START, /* We have written a write cmd to the
interface. */
KCS_WAIT_WRITE, /* We are writing bytes to the
interface. */
KCS_WAIT_WRITE_END, /* We have written the write end cmd
to the interface, and still need to
write the last byte. */
KCS_WAIT_READ, /* We are waiting to read data from
the interface. */
KCS_ERROR0, /* State to transition to the error
handler, this was added to the
state machine in the spec to be
sure IBF was there. */
KCS_ERROR1, /* First stage error handler, wait for
the interface to respond. */
KCS_ERROR2, /* The abort cmd has been written,
wait for the interface to
respond. */
KCS_ERROR3, /* We wrote some data to the
interface, wait for it to switch to
read mode. */
KCS_HOSED /* The hardware failed to follow the
state machine. */
/* The KCS interface is currently doing nothing. */
KCS_IDLE,
/*
* We are starting an operation. The data is in the output
* buffer, but nothing has been done to the interface yet. This
* was added to the state machine in the spec to wait for the
* initial IBF.
*/
KCS_START_OP,
/* We have written a write cmd to the interface. */
KCS_WAIT_WRITE_START,
/* We are writing bytes to the interface. */
KCS_WAIT_WRITE,
/*
* We have written the write end cmd to the interface, and
* still need to write the last byte.
*/
KCS_WAIT_WRITE_END,
/* We are waiting to read data from the interface. */
KCS_WAIT_READ,
/*
* State to transition to the error handler, this was added to
* the state machine in the spec to be sure IBF was there.
*/
KCS_ERROR0,
/*
* First stage error handler, wait for the interface to
* respond.
*/
KCS_ERROR1,
/*
* The abort cmd has been written, wait for the interface to
* respond.
*/
KCS_ERROR2,
/*
* We wrote some data to the interface, wait for it to switch
* to read mode.
*/
KCS_ERROR3,
/* The hardware failed to follow the state machine. */
KCS_HOSED
};
#define MAX_KCS_READ_SIZE IPMI_MAX_MSG_LENGTH
......@@ -102,8 +123,7 @@ enum kcs_states {
#define MAX_ERROR_RETRIES 10
#define ERROR0_OBF_WAIT_JIFFIES (2*HZ)
struct si_sm_data
{
struct si_sm_data {
enum kcs_states state;
struct si_sm_io *io;
unsigned char write_data[MAX_KCS_WRITE_SIZE];
......@@ -187,7 +207,8 @@ static inline void start_error_recovery(struct si_sm_data *kcs, char *reason)
(kcs->error_retries)++;
if (kcs->error_retries > MAX_ERROR_RETRIES) {
if (kcs_debug & KCS_DEBUG_ENABLE)
printk(KERN_DEBUG "ipmi_kcs_sm: kcs hosed: %s\n", reason);
printk(KERN_DEBUG "ipmi_kcs_sm: kcs hosed: %s\n",
reason);
kcs->state = KCS_HOSED;
} else {
kcs->error0_timeout = jiffies + ERROR0_OBF_WAIT_JIFFIES;
......@@ -271,10 +292,9 @@ static int start_kcs_transaction(struct si_sm_data *kcs, unsigned char *data,
if (kcs_debug & KCS_DEBUG_MSG) {
printk(KERN_DEBUG "start_kcs_transaction -");
for (i = 0; i < size; i ++) {
for (i = 0; i < size; i++)
printk(" %02x", (unsigned char) (data [i]));
}
printk ("\n");
printk("\n");
}
kcs->error_retries = 0;
memcpy(kcs->write_data, data, size);
......@@ -305,9 +325,11 @@ static int get_kcs_result(struct si_sm_data *kcs, unsigned char *data,
kcs->read_pos = 3;
}
if (kcs->truncated) {
/* Report a truncated error. We might overwrite
another error, but that's too bad, the user needs
to know it was truncated. */
/*
* Report a truncated error. We might overwrite
* another error, but that's too bad, the user needs
* to know it was truncated.
*/
data[2] = IPMI_ERR_MSG_TRUNCATED;
kcs->truncated = 0;
}
......@@ -315,9 +337,11 @@ static int get_kcs_result(struct si_sm_data *kcs, unsigned char *data,
return kcs->read_pos;
}
/* This implements the state machine defined in the IPMI manual, see
that for details on how this works. Divide that flowchart into
sections delimited by "Wait for IBF" and this will become clear. */
/*
* This implements the state machine defined in the IPMI manual, see
* that for details on how this works. Divide that flowchart into
* sections delimited by "Wait for IBF" and this will become clear.
*/
static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time)
{
unsigned char status;
......@@ -392,7 +416,8 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time)
case KCS_WAIT_WRITE_END:
if (state != KCS_WRITE_STATE) {
start_error_recovery(kcs,
"Not in write state for write end");
"Not in write state"
" for write end");
break;
}
clear_obf(kcs, status);
......@@ -413,13 +438,15 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time)
return SI_SM_CALL_WITH_DELAY;
read_next_byte(kcs);
} else {
/* We don't implement this exactly like the state
machine in the spec. Some broken hardware
does not write the final dummy byte to the
read register. Thus obf will never go high
here. We just go straight to idle, and we
handle clearing out obf in idle state if it
happens to come in. */
/*
* We don't implement this exactly like the state
* machine in the spec. Some broken hardware
* does not write the final dummy byte to the
* read register. Thus obf will never go high
* here. We just go straight to idle, and we
* handle clearing out obf in idle state if it
* happens to come in.
*/
clear_obf(kcs, status);
kcs->orig_write_count = 0;
kcs->state = KCS_IDLE;
......@@ -430,7 +457,8 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time)
case KCS_ERROR0:
clear_obf(kcs, status);
status = read_status(kcs);
if (GET_STATUS_OBF(status)) /* controller isn't responding */
if (GET_STATUS_OBF(status))
/* controller isn't responding */
if (time_before(jiffies, kcs->error0_timeout))
return SI_SM_CALL_WITH_TICK_DELAY;
write_cmd(kcs, KCS_GET_STATUS_ABORT);
......@@ -495,10 +523,12 @@ static int kcs_size(void)
static int kcs_detect(struct si_sm_data *kcs)
{
/* It's impossible for the KCS status register to be all 1's,
(assuming a properly functioning, self-initialized BMC)
but that's what you get from reading a bogus address, so we
test that first. */
/*
* It's impossible for the KCS status register to be all 1's,
* (assuming a properly functioning, self-initialized BMC)
* but that's what you get from reading a bogus address, so we
* test that first.
*/
if (read_status(kcs) == 0xff)
return 1;
......@@ -509,8 +539,7 @@ static void kcs_cleanup(struct si_sm_data *kcs)
{
}
struct si_sm_handlers kcs_smi_handlers =
{
struct si_sm_handlers kcs_smi_handlers = {
.init_data = init_kcs_data,
.start_transaction = start_kcs_transaction,
.get_result = get_kcs_result,
......
drivers/char/ipmi/ipmi_si_intf.c
View file @ c305e3d3
......@@ -114,8 +114,7 @@ static char *si_to_str[] = { "kcs", "smic", "bt" };
#define DEVICE_NAME "ipmi_si"
static struct device_driver ipmi_driver =
{
static struct device_driver ipmi_driver = {
.name = DEVICE_NAME,
.bus = &platform_bus_type
};
......@@ -169,8 +168,7 @@ enum si_stat_indexes {
SI_NUM_STATS
};
struct smi_info
{
struct smi_info {
int intf_num;
ipmi_smi_t intf;
struct si_sm_data *si_sm;
......@@ -183,8 +181,10 @@ struct smi_info
struct ipmi_smi_msg *curr_msg;
enum si_intf_state si_state;
/* Used to handle the various types of I/O that can occur with
IPMI */
/*
* Used to handle the various types of I/O that can occur with
* IPMI
*/
struct si_sm_io io;
int (*io_setup)(struct smi_info *info);
void (*io_cleanup)(struct smi_info *info);
......@@ -195,15 +195,18 @@ struct smi_info
void (*addr_source_cleanup)(struct smi_info *info);
void *addr_source_data;
/* Per-OEM handler, called from handle_flags().
Returns 1 when handle_flags() needs to be re-run
or 0 indicating it set si_state itself.
/*
* Per-OEM handler, called from handle_flags(). Returns 1
* when handle_flags() needs to be re-run or 0 indicating it
* set si_state itself.
*/
int (*oem_data_avail_handler)(struct smi_info *smi_info);
/* Flags from the last GET_MSG_FLAGS command, used when an ATTN
is set to hold the flags until we are done handling everything
from the flags. */
/*
* Flags from the last GET_MSG_FLAGS command, used when an ATTN
* is set to hold the flags until we are done handling everything
* from the flags.
*/
#define RECEIVE_MSG_AVAIL 0x01
#define EVENT_MSG_BUFFER_FULL 0x02
#define WDT_PRE_TIMEOUT_INT 0x08
......@@ -215,21 +218,27 @@ struct smi_info
OEM2_DATA_AVAIL)
unsigned char msg_flags;
/* If set to true, this will request events the next time the
state machine is idle. */
/*
* If set to true, this will request events the next time the
* state machine is idle.
*/
atomic_t req_events;
/* If true, run the state machine to completion on every send
call. Generally used after a panic to make sure stuff goes
out. */
/*
* If true, run the state machine to completion on every send
* call. Generally used after a panic to make sure stuff goes
* out.
*/
int run_to_completion;
/* The I/O port of an SI interface. */
int port;
/* The space between start addresses of the two ports. For
instance, if the first port is 0xca2 and the spacing is 4, then
the second port is 0xca6. */
/*
* The space between start addresses of the two ports. For
* instance, if the first port is 0xca2 and the spacing is 4, then
* the second port is 0xca6.
*/
unsigned int spacing;
/* zero if no irq; */
......@@ -244,10 +253,12 @@ struct smi_info
/* Used to gracefully stop the timer without race conditions. */
atomic_t stop_operation;
/* The driver will disable interrupts when it gets into a
situation where it cannot handle messages due to lack of
memory. Once that situation clears up, it will re-enable
interrupts. */
/*
* The driver will disable interrupts when it gets into a
* situation where it cannot handle messages due to lack of
* memory. Once that situation clears up, it will re-enable
* interrupts.
*/
int interrupt_disabled;
/* From the get device id response... */
......@@ -257,8 +268,10 @@ struct smi_info
struct device *dev;
struct platform_device *pdev;
/* True if we allocated the device, false if it came from
* someplace else (like PCI). */
/*
* True if we allocated the device, false if it came from
* someplace else (like PCI).
*/
int dev_registered;
/* Slave address, could be reported from DMI. */
......@@ -288,7 +301,7 @@ static int try_smi_init(struct smi_info *smi);
static void cleanup_one_si(struct smi_info *to_clean);
static ATOMIC_NOTIFIER_HEAD(xaction_notifier_list);
static int register_xaction_notifier(struct notifier_block * nb)
static int register_xaction_notifier(struct notifier_block *nb)
{
return atomic_notifier_chain_register(&xaction_notifier_list, nb);
}
......@@ -329,8 +342,10 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info)
struct timeval t;
#endif
/* No need to save flags, we aleady have interrupts off and we
already hold the SMI lock. */
/*
* No need to save flags, we aleady have interrupts off and we
* already hold the SMI lock.
*/
if (!smi_info->run_to_completion)
spin_lock(&(smi_info->msg_lock));
......@@ -353,7 +368,7 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info)
link);
#ifdef DEBUG_TIMING
do_gettimeofday(&t);
printk("**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec);
printk(KERN_DEBUG "**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec);
#endif
err = atomic_notifier_call_chain(&xaction_notifier_list,
0, smi_info);
......@@ -365,9 +380,8 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info)
smi_info->si_sm,
smi_info->curr_msg->data,
smi_info->curr_msg->data_size);
if (err) {
if (err)
return_hosed_msg(smi_info, err);
}
rv = SI_SM_CALL_WITHOUT_DELAY;
}
......@@ -382,8 +396,10 @@ static void start_enable_irq(struct smi_info *smi_info)
{
unsigned char msg[2];
/* If we are enabling interrupts, we have to tell the
BMC to use them. */
/*
* If we are enabling interrupts, we have to tell the
* BMC to use them.
*/
msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
......@@ -415,10 +431,12 @@ static void start_clear_flags(struct smi_info *smi_info)
smi_info->si_state = SI_CLEARING_FLAGS;
}
/* When we have a situtaion where we run out of memory and cannot
allocate messages, we just leave them in the BMC and run the system
polled until we can allocate some memory. Once we have some
memory, we will re-enable the interrupt. */
/*
* When we have a situtaion where we run out of memory and cannot
* allocate messages, we just leave them in the BMC and run the system
* polled until we can allocate some memory. Once we have some
* memory, we will re-enable the interrupt.
*/
static inline void disable_si_irq(struct smi_info *smi_info)
{
if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
......@@ -489,9 +507,8 @@ static void handle_flags(struct smi_info *smi_info)
smi_info->oem_data_avail_handler) {
if (smi_info->oem_data_avail_handler(smi_info))
goto retry;
} else {
} else
smi_info->si_state = SI_NORMAL;
}
}
static void handle_transaction_done(struct smi_info *smi_info)
......@@ -501,7 +518,7 @@ static void handle_transaction_done(struct smi_info *smi_info)
struct timeval t;
do_gettimeofday(&t);
printk("**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec);
printk(KERN_DEBUG "**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec);
#endif
switch (smi_info->si_state) {
case SI_NORMAL:
......@@ -514,9 +531,11 @@ static void handle_transaction_done(struct smi_info *smi_info)
smi_info->curr_msg->rsp,
IPMI_MAX_MSG_LENGTH);
/* Do this here becase deliver_recv_msg() releases the
lock, and a new message can be put in during the
time the lock is released. */
/*
* Do this here becase deliver_recv_msg() releases the
* lock, and a new message can be put in during the
* time the lock is released.
*/
msg = smi_info->curr_msg;
smi_info->curr_msg = NULL;
deliver_recv_msg(smi_info, msg);
......@@ -530,12 +549,13 @@ static void handle_transaction_done(struct smi_info *smi_info)
/* We got the flags from the SMI, now handle them. */
len = smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
if (msg[2] != 0) {
/* Error fetching flags, just give up for
now. */
/* Error fetching flags, just give up for now. */
smi_info->si_state = SI_NORMAL;
} else if (len < 4) {
/* Hmm, no flags. That's technically illegal, but
don't use uninitialized data. */
/*
* Hmm, no flags. That's technically illegal, but
* don't use uninitialized data.
*/
smi_info->si_state = SI_NORMAL;
} else {
smi_info->msg_flags = msg[3];
......@@ -572,9 +592,11 @@ static void handle_transaction_done(struct smi_info *smi_info)
smi_info->curr_msg->rsp,
IPMI_MAX_MSG_LENGTH);
/* Do this here becase deliver_recv_msg() releases the
lock, and a new message can be put in during the
time the lock is released. */
/*
* Do this here becase deliver_recv_msg() releases the
* lock, and a new message can be put in during the
* time the lock is released.
*/
msg = smi_info->curr_msg;
smi_info->curr_msg = NULL;
if (msg->rsp[2] != 0) {
......@@ -587,10 +609,12 @@ static void handle_transaction_done(struct smi_info *smi_info)
} else {
smi_inc_stat(smi_info, events);
/* Do this before we deliver the message
because delivering the message releases the
lock and something else can mess with the
state. */
/*
* Do this before we deliver the message
* because delivering the message releases the
* lock and something else can mess with the
* state.
*/
handle_flags(smi_info);
deliver_recv_msg(smi_info, msg);
......@@ -606,9 +630,11 @@ static void handle_transaction_done(struct smi_info *smi_info)
smi_info->curr_msg->rsp,
IPMI_MAX_MSG_LENGTH);
/* Do this here becase deliver_recv_msg() releases the
lock, and a new message can be put in during the
time the lock is released. */
/*
* Do this here becase deliver_recv_msg() releases the
* lock, and a new message can be put in during the
* time the lock is released.
*/
msg = smi_info->curr_msg;
smi_info->curr_msg = NULL;
if (msg->rsp[2] != 0) {
......@@ -621,10 +647,12 @@ static void handle_transaction_done(struct smi_info *smi_info)
} else {
smi_inc_stat(smi_info, incoming_messages);
/* Do this before we deliver the message
because delivering the message releases the
lock and something else can mess with the
state. */
/*
* Do this before we deliver the message
* because delivering the message releases the
* lock and something else can mess with the
* state.
*/
handle_flags(smi_info);
deliver_recv_msg(smi_info, msg);
......@@ -712,46 +740,49 @@ static void handle_transaction_done(struct smi_info *smi_info)
}
}
/* Called on timeouts and events. Timeouts should pass the elapsed
time, interrupts should pass in zero. Must be called with
si_lock held and interrupts disabled. */
/*
* Called on timeouts and events. Timeouts should pass the elapsed
* time, interrupts should pass in zero. Must be called with
* si_lock held and interrupts disabled.
*/
static enum si_sm_result smi_event_handler(struct smi_info *smi_info,
int time)
{
enum si_sm_result si_sm_result;
restart:
/* There used to be a loop here that waited a little while
(around 25us) before giving up. That turned out to be
pointless, the minimum delays I was seeing were in the 300us
range, which is far too long to wait in an interrupt. So
we just run until the state machine tells us something
happened or it needs a delay. */
/*
* There used to be a loop here that waited a little while
* (around 25us) before giving up. That turned out to be
* pointless, the minimum delays I was seeing were in the 300us
* range, which is far too long to wait in an interrupt. So
* we just run until the state machine tells us something
* happened or it needs a delay.
*/
si_sm_result = smi_info->handlers->event(smi_info->si_sm, time);
time = 0;
while (si_sm_result == SI_SM_CALL_WITHOUT_DELAY)
{
si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
}
if (si_sm_result == SI_SM_TRANSACTION_COMPLETE)
{
if (si_sm_result == SI_SM_TRANSACTION_COMPLETE) {
smi_inc_stat(smi_info, complete_transactions);
handle_transaction_done(smi_info);
si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
}
else if (si_sm_result == SI_SM_HOSED)
{
} else if (si_sm_result == SI_SM_HOSED) {
smi_inc_stat(smi_info, hosed_count);
/* Do the before return_hosed_msg, because that
releases the lock. */
/*
* Do the before return_hosed_msg, because that
* releases the lock.
*/
smi_info->si_state = SI_NORMAL;
if (smi_info->curr_msg != NULL) {
/* If we were handling a user message, format
a response to send to the upper layer to
tell it about the error. */
/*
* If we were handling a user message, format
* a response to send to the upper layer to
* tell it about the error.
*/
return_hosed_msg(smi_info, IPMI_ERR_UNSPECIFIED);
}
si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
......@@ -761,17 +792,18 @@ static enum si_sm_result smi_event_handler(struct smi_info *smi_info,
* We prefer handling attn over new messages. But don't do
* this if there is not yet an upper layer to handle anything.
*/
if (likely(smi_info->intf) && si_sm_result == SI_SM_ATTN)
{
if (likely(smi_info->intf) && si_sm_result == SI_SM_ATTN) {
unsigned char msg[2];
smi_inc_stat(smi_info, attentions);
/* Got a attn, send down a get message flags to see
what's causing it. It would be better to handle
this in the upper layer, but due to the way
interrupts work with the SMI, that's not really
possible. */
/*
* Got a attn, send down a get message flags to see
* what's causing it. It would be better to handle
* this in the upper layer, but due to the way
* interrupts work with the SMI, that's not really
* possible.
*/
msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
msg[1] = IPMI_GET_MSG_FLAGS_CMD;
......@@ -791,10 +823,11 @@ static enum si_sm_result smi_event_handler(struct smi_info *smi_info,
}
if ((si_sm_result == SI_SM_IDLE)
&& (atomic_read(&smi_info->req_events)))
{
/* We are idle and the upper layer requested that I fetch
events, so do so. */
&& (atomic_read(&smi_info->req_events))) {
/*
* We are idle and the upper layer requested that I fetch
* events, so do so.
*/
atomic_set(&smi_info->req_events, 0);
smi_info->curr_msg = ipmi_alloc_smi_msg();
......@@ -871,11 +904,8 @@ static void sender(void *send_info,
spin_unlock_irqrestore(&smi_info->msg_lock, flags);
spin_lock_irqsave(&smi_info->si_lock, flags);
if ((smi_info->si_state == SI_NORMAL)
&& (smi_info->curr_msg == NULL))
{
if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL)
start_next_msg(smi_info);
}
spin_unlock_irqrestore(&smi_info->si_lock, flags);
}
......@@ -906,9 +936,8 @@ static int ipmi_thread(void *data)
spin_lock_irqsave(&(smi_info->si_lock), flags);
smi_result = smi_event_handler(smi_info, 0);
spin_unlock_irqrestore(&(smi_info->si_lock), flags);
if (smi_result == SI_SM_CALL_WITHOUT_DELAY) {
/* do nothing */
}
if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
; /* do nothing */
else if (smi_result == SI_SM_CALL_WITH_DELAY)
schedule();
else
......@@ -959,7 +988,7 @@ static void smi_timeout(unsigned long data)
spin_lock_irqsave(&(smi_info->si_lock), flags);
#ifdef DEBUG_TIMING
do_gettimeofday(&t);
printk("**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec);
printk(KERN_DEBUG "**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec);
#endif
jiffies_now = jiffies;
time_diff = (((long)jiffies_now - (long)smi_info->last_timeout_jiffies)
......@@ -977,8 +1006,10 @@ static void smi_timeout(unsigned long data)
goto do_add_timer;
}
/* If the state machine asks for a short delay, then shorten
the timer timeout. */
/*
* If the state machine asks for a short delay, then shorten
* the timer timeout.
*/
if (smi_result == SI_SM_CALL_WITH_DELAY) {
smi_inc_stat(smi_info, short_timeouts);
smi_info->si_timer.expires = jiffies + 1;
......@@ -1005,7 +1036,7 @@ static irqreturn_t si_irq_handler(int irq, void *data)
#ifdef DEBUG_TIMING
do_gettimeofday(&t);
printk("**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec);
printk(KERN_DEBUG "**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec);
#endif
smi_event_handler(smi_info, 0);
spin_unlock_irqrestore(&(smi_info->si_lock), flags);
......@@ -1074,8 +1105,7 @@ static void set_maintenance_mode(void *send_info, int enable)
atomic_set(&smi_info->req_events, 0);
}
static struct ipmi_smi_handlers handlers =
{
static struct ipmi_smi_handlers handlers = {
.owner = THIS_MODULE,
.start_processing = smi_start_processing,
.sender = sender,
......@@ -1085,8 +1115,10 @@ static struct ipmi_smi_handlers handlers =
.poll = poll,
};
/* There can be 4 IO ports passed in (with or without IRQs), 4 addresses,
a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS */
/*
* There can be 4 IO ports passed in (with or without IRQs), 4 addresses,
* a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS.
*/
static LIST_HEAD(smi_infos);
static DEFINE_MUTEX(smi_infos_lock);
......@@ -1277,11 +1309,10 @@ static void port_cleanup(struct smi_info *info)
int idx;
if (addr) {
for (idx = 0; idx < info->io_size; idx++) {
for (idx = 0; idx < info->io_size; idx++)
release_region(addr + idx * info->io.regspacing,
info->io.regsize);
}
}
}
static int port_setup(struct smi_info *info)
......@@ -1294,8 +1325,10 @@ static int port_setup(struct smi_info *info)
info->io_cleanup = port_cleanup;
/* Figure out the actual inb/inw/inl/etc routine to use based
upon the register size. */
/*
* Figure out the actual inb/inw/inl/etc routine to use based
* upon the register size.
*/
switch (info->io.regsize) {
case 1:
info->io.inputb = port_inb;
......@@ -1310,12 +1343,13 @@ static int port_setup(struct smi_info *info)
info->io.outputb = port_outl;
break;
default:
printk("ipmi_si: Invalid register size: %d\n",
printk(KERN_WARNING "ipmi_si: Invalid register size: %d\n",
info->io.regsize);
return -EINVAL;
}
/* Some BIOSes reserve disjoint I/O regions in their ACPI
/*
* Some BIOSes reserve disjoint I/O regions in their ACPI
* tables. This causes problems when trying to register the
* entire I/O region. Therefore we must register each I/O
* port separately.
......@@ -1408,8 +1442,10 @@ static int mem_setup(struct smi_info *info)
info->io_cleanup = mem_cleanup;
/* Figure out the actual readb/readw/readl/etc routine to use based
upon the register size. */
/*
* Figure out the actual readb/readw/readl/etc routine to use based
* upon the register size.
*/
switch (info->io.regsize) {
case 1:
info->io.inputb = intf_mem_inb;
......@@ -1430,16 +1466,18 @@ static int mem_setup(struct smi_info *info)
break;
#endif
default:
printk("ipmi_si: Invalid register size: %d\n",
printk(KERN_WARNING "ipmi_si: Invalid register size: %d\n",
info->io.regsize);
return -EINVAL;
}
/* Calculate the total amount of memory to claim. This is an
/*
* Calculate the total amount of memory to claim. This is an
* unusual looking calculation, but it avoids claiming any
* more memory than it has to. It will claim everything
* between the first address to the end of the last full
* register. */
* register.
*/
mapsize = ((info->io_size * info->io.regspacing)
- (info->io.regspacing - info->io.regsize));
......@@ -1769,9 +1807,11 @@ static __devinit void hardcode_find_bmc(void)
#include <linux/acpi.h>
/* Once we get an ACPI failure, we don't try any more, because we go
through the tables sequentially. Once we don't find a table, there
are no more. */
/*
* Once we get an ACPI failure, we don't try any more, because we go
* through the tables sequentially. Once we don't find a table, there
* are no more.
*/
static int acpi_failure;
/* For GPE-type interrupts. */
......@@ -1834,7 +1874,8 @@ static int acpi_gpe_irq_setup(struct smi_info *info)
/*
* Defined at
* http://h21007.www2.hp.com/dspp/files/unprotected/devresource/Docs/TechPapers/IA64/hpspmi.pdf
* http://h21007.www2.hp.com/dspp/files/unprotected/devresource/
* Docs/TechPapers/IA64/hpspmi.pdf
*/
struct SPMITable {
s8 Signature[4];
......@@ -1856,14 +1897,18 @@ struct SPMITable {
*/
u8 InterruptType;
/* If bit 0 of InterruptType is set, then this is the SCI
interrupt in the GPEx_STS register. */
/*
* If bit 0 of InterruptType is set, then this is the SCI
* interrupt in the GPEx_STS register.
*/
u8 GPE;
s16 Reserved;
/* If bit 1 of InterruptType is set, then this is the I/O
APIC/SAPIC interrupt. */
/*
* If bit 1 of InterruptType is set, then this is the I/O
* APIC/SAPIC interrupt.
*/
u32 GlobalSystemInterrupt;
/* The actual register address. */
......@@ -1898,8 +1943,7 @@ static __devinit int try_init_acpi(struct SPMITable *spmi)
info->addr_source = "ACPI";
/* Figure out the interface type. */
switch (spmi->InterfaceType)
{
switch (spmi->InterfaceType) {
case 1: /* KCS */
info->si_type = SI_KCS;
break;
......@@ -1947,7 +1991,8 @@ static __devinit int try_init_acpi(struct SPMITable *spmi)
info->io.addr_type = IPMI_IO_ADDR_SPACE;
} else {
kfree(info);
printk("ipmi_si: Unknown ACPI I/O Address type\n");
printk(KERN_WARNING
"ipmi_si: Unknown ACPI I/O Address type\n");
return -EIO;
}
info->io.addr_data = spmi->addr.address;
......@@ -1981,8 +2026,7 @@ static __devinit void acpi_find_bmc(void)
#endif
#ifdef CONFIG_DMI
struct dmi_ipmi_data
{
struct dmi_ipmi_data {
u8 type;
u8 addr_space;
unsigned long base_addr;
......@@ -2007,11 +2051,10 @@ static int __devinit decode_dmi(const struct dmi_header *dm,
/* I/O */
base_addr &= 0xFFFE;
dmi->addr_space = IPMI_IO_ADDR_SPACE;
}
else {
} else
/* Memory */
dmi->addr_space = IPMI_MEM_ADDR_SPACE;
}
/* If bit 4 of byte 0x10 is set, then the lsb for the address
is odd. */
dmi->base_addr = base_addr | ((data[0x10] & 0x10) >> 4);
......@@ -2020,7 +2063,7 @@ static int __devinit decode_dmi(const struct dmi_header *dm,
/* The top two bits of byte 0x10 hold the register spacing. */
reg_spacing = (data[0x10] & 0xC0) >> 6;
switch(reg_spacing){
switch (reg_spacing) {
case 0x00: /* Byte boundaries */
dmi->offset = 1;
break;
......@@ -2036,12 +2079,14 @@ static int __devinit decode_dmi(const struct dmi_header *dm,
}
} else {
/* Old DMI spec. */
/* Note that technically, the lower bit of the base
/*
* Note that technically, the lower bit of the base
* address should be 1 if the address is I/O and 0 if
* the address is in memory. So many systems get that
* wrong (and all that I have seen are I/O) so we just
* ignore that bit and assume I/O. Systems that use
* memory should use the newer spec, anyway. */
* memory should use the newer spec, anyway.
*/
dmi->base_addr = base_addr & 0xfffe;
dmi->addr_space = IPMI_IO_ADDR_SPACE;
dmi->offset = 1;
......@@ -2324,7 +2369,7 @@ static int __devinit ipmi_of_probe(struct of_device *dev,
info->io.addr_data, info->io.regsize, info->io.regspacing,
info->irq);
dev->dev.driver_data = (void*) info;
dev->dev.driver_data = (void *) info;
return try_smi_init(info);
}
......@@ -2337,14 +2382,16 @@ static int __devexit ipmi_of_remove(struct of_device *dev)
static struct of_device_id ipmi_match[] =
{
{ .type = "ipmi", .compatible = "ipmi-kcs", .data = (void *)(unsigned long) SI_KCS },
{ .type = "ipmi", .compatible = "ipmi-smic", .data = (void *)(unsigned long) SI_SMIC },
{ .type = "ipmi", .compatible = "ipmi-bt", .data = (void *)(unsigned long) SI_BT },
{ .type = "ipmi", .compatible = "ipmi-kcs",
.data = (void *)(unsigned long) SI_KCS },
{ .type = "ipmi", .compatible = "ipmi-smic",
.data = (void *)(unsigned long) SI_SMIC },
{ .type = "ipmi", .compatible = "ipmi-bt",
.data = (void *)(unsigned long) SI_BT },
{},
};
static struct of_platform_driver ipmi_of_platform_driver =
{
static struct of_platform_driver ipmi_of_platform_driver = {
.name = "ipmi",
.match_table = ipmi_match,
.probe = ipmi_of_probe,
......@@ -2365,32 +2412,32 @@ static int try_get_dev_id(struct smi_info *smi_info)
if (!resp)
return -ENOMEM;
/* Do a Get Device ID command, since it comes back with some
useful info. */
/*
* Do a Get Device ID command, since it comes back with some
* useful info.
*/
msg[0] = IPMI_NETFN_APP_REQUEST << 2;
msg[1] = IPMI_GET_DEVICE_ID_CMD;
smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
smi_result = smi_info->handlers->event(smi_info->si_sm, 0);
for (;;)
{
for (;;) {
if (smi_result == SI_SM_CALL_WITH_DELAY ||
smi_result == SI_SM_CALL_WITH_TICK_DELAY) {
schedule_timeout_uninterruptible(1);
smi_result = smi_info->handlers->event(
smi_info->si_sm, 100);
}
else if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
{
} else if (smi_result == SI_SM_CALL_WITHOUT_DELAY) {
smi_result = smi_info->handlers->event(
smi_info->si_sm, 0);
}
else
} else
break;
}
if (smi_result == SI_SM_HOSED) {
/* We couldn't get the state machine to run, so whatever's at
the port is probably not an IPMI SMI interface. */
/*
* We couldn't get the state machine to run, so whatever's at
* the port is probably not an IPMI SMI interface.
*/
rv = -ENODEV;
goto out;
}
......@@ -2518,8 +2565,7 @@ static void setup_dell_poweredge_oem_data_handler(struct smi_info *smi_info)
id->ipmi_version == DELL_POWEREDGE_8G_BMC_IPMI_VERSION) {
smi_info->oem_data_avail_handler =
oem_data_avail_to_receive_msg_avail;
}
else if (ipmi_version_major(id) < 1 ||
} else if (ipmi_version_major(id) < 1 ||
(ipmi_version_major(id) == 1 &&
ipmi_version_minor(id) < 5)) {
smi_info->oem_data_avail_handler =
......@@ -2613,8 +2659,10 @@ static void setup_xaction_handlers(struct smi_info *smi_info)
static inline void wait_for_timer_and_thread(struct smi_info *smi_info)
{
if (smi_info->intf) {
/* The timer and thread are only running if the
interface has been started up and registered. */
/*
* The timer and thread are only running if the
* interface has been started up and registered.
*/
if (smi_info->thread != NULL)
kthread_stop(smi_info->thread);
del_timer_sync(&smi_info->si_timer);
......@@ -2739,7 +2787,7 @@ static int try_smi_init(struct smi_info *new_smi)
/* Allocate the state machine's data and initialize it. */
new_smi->si_sm = kmalloc(new_smi->handlers->size(), GFP_KERNEL);
if (!new_smi->si_sm) {
printk(" Could not allocate state machine memory\n");
printk(KERN_ERR "Could not allocate state machine memory\n");
rv = -ENOMEM;
goto out_err;
}
......@@ -2749,7 +2797,7 @@ static int try_smi_init(struct smi_info *new_smi)
/* Now that we know the I/O size, we can set up the I/O. */
rv = new_smi->io_setup(new_smi);
if (rv) {
printk(" Could not set up I/O space\n");
printk(KERN_ERR "Could not set up I/O space\n");
goto out_err;
}
......@@ -2765,8 +2813,10 @@ static int try_smi_init(struct smi_info *new_smi)
goto out_err;
}
/* Attempt a get device id command. If it fails, we probably
don't have a BMC here. */
/*
* Attempt a get device id command. If it fails, we probably
* don't have a BMC here.
*/
rv = try_get_dev_id(new_smi);
if (rv) {
if (new_smi->addr_source)
......@@ -2791,16 +2841,20 @@ static int try_smi_init(struct smi_info *new_smi)
new_smi->intf_num = smi_num;
smi_num++;
/* Start clearing the flags before we enable interrupts or the
timer to avoid racing with the timer. */
/*
* Start clearing the flags before we enable interrupts or the
* timer to avoid racing with the timer.
*/
start_clear_flags(new_smi);
/* IRQ is defined to be set when non-zero. */
if (new_smi->irq)
new_smi->si_state = SI_CLEARING_FLAGS_THEN_SET_IRQ;
if (!new_smi->dev) {
/* If we don't already have a device from something
* else (like PCI), then register a new one. */
/*
* If we don't already have a device from something
* else (like PCI), then register a new one.
*/
new_smi->pdev = platform_device_alloc("ipmi_si",
new_smi->intf_num);
if (rv) {
......@@ -2871,7 +2925,8 @@ static int try_smi_init(struct smi_info *new_smi)
mutex_unlock(&smi_infos_lock);
printk(KERN_INFO "IPMI %s interface initialized\n",si_to_str[new_smi->si_type]);
printk(KERN_INFO "IPMI %s interface initialized\n",
si_to_str[new_smi->si_type]);
return 0;
......@@ -2886,9 +2941,11 @@ static int try_smi_init(struct smi_info *new_smi)
if (new_smi->irq_cleanup)
new_smi->irq_cleanup(new_smi);
/* Wait until we know that we are out of any interrupt
handlers might have been running before we freed the
interrupt. */
/*
* Wait until we know that we are out of any interrupt
* handlers might have been running before we freed the
* interrupt.
*/
synchronize_sched();
if (new_smi->si_sm) {
......@@ -2960,11 +3017,10 @@ static __devinit int init_ipmi_si(void)
#ifdef CONFIG_PCI
rv = pci_register_driver(&ipmi_pci_driver);
if (rv){
if (rv)
printk(KERN_ERR
"init_ipmi_si: Unable to register PCI driver: %d\n",
rv);
}
#endif
#ifdef CONFIG_PPC_OF
......@@ -2993,7 +3049,8 @@ static __devinit int init_ipmi_si(void)
of_unregister_platform_driver(&ipmi_of_platform_driver);
#endif
driver_unregister(&ipmi_driver);
printk("ipmi_si: Unable to find any System Interface(s)\n");
printk(KERN_WARNING
"ipmi_si: Unable to find any System Interface(s)\n");
return -ENODEV;
} else {
mutex_unlock(&smi_infos_lock);
......@@ -3015,13 +3072,17 @@ static void cleanup_one_si(struct smi_info *to_clean)
/* Tell the driver that we are shutting down. */
atomic_inc(&to_clean->stop_operation);
/* Make sure the timer and thread are stopped and will not run
again. */
/*
* Make sure the timer and thread are stopped and will not run
* again.
*/
wait_for_timer_and_thread(to_clean);
/* Timeouts are stopped, now make sure the interrupts are off
for the device. A little tricky with locks to make sure
there are no races. */
/*
* Timeouts are stopped, now make sure the interrupts are off
* for the device. A little tricky with locks to make sure
* there are no races.
*/
spin_lock_irqsave(&to_clean->si_lock, flags);
while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
spin_unlock_irqrestore(&to_clean->si_lock, flags);
......@@ -3092,4 +3153,5 @@ module_exit(cleanup_ipmi_si);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>");
MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT system interfaces.");
MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT"
" system interfaces.");
drivers/char/ipmi/ipmi_si_sm.h
View file @ c305e3d3
......@@ -34,22 +34,27 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* This is defined by the state machines themselves, it is an opaque
data type for them to use. */
/*
* This is defined by the state machines themselves, it is an opaque
* data type for them to use.
*/
struct si_sm_data;
/* The structure for doing I/O in the state machine. The state
machine doesn't have the actual I/O routines, they are done through
this interface. */
struct si_sm_io
{
/*
* The structure for doing I/O in the state machine. The state
* machine doesn't have the actual I/O routines, they are done through
* this interface.
*/
struct si_sm_io {
unsigned char (*inputb)(struct si_sm_io *io, unsigned int offset);
void (*outputb)(struct si_sm_io *io,
unsigned int offset,
unsigned char b);
/* Generic info used by the actual handling routines, the
state machine shouldn't touch these. */
/*
* Generic info used by the actual handling routines, the
* state machine shouldn't touch these.
*/
void __iomem *addr;
int regspacing;
int regsize;
......@@ -59,53 +64,67 @@ struct si_sm_io
};
/* Results of SMI events. */
enum si_sm_result
{
enum si_sm_result {
SI_SM_CALL_WITHOUT_DELAY, /* Call the driver again immediately */
SI_SM_CALL_WITH_DELAY, /* Delay some before calling again. */
SI_SM_CALL_WITH_TICK_DELAY, /* Delay at least 1 tick before calling again. */
SI_SM_CALL_WITH_TICK_DELAY,/* Delay >=1 tick before calling again. */
SI_SM_TRANSACTION_COMPLETE, /* A transaction is finished. */
SI_SM_IDLE, /* The SM is in idle state. */
SI_SM_HOSED, /* The hardware violated the state machine. */
SI_SM_ATTN /* The hardware is asserting attn and the
state machine is idle. */
/*
* The hardware is asserting attn and the state machine is
* idle.
*/
SI_SM_ATTN
};
/* Handlers for the SMI state machine. */
struct si_sm_handlers
{
/* Put the version number of the state machine here so the
upper layer can print it. */
struct si_sm_handlers {
/*
* Put the version number of the state machine here so the
* upper layer can print it.
*/
char *version;
/* Initialize the data and return the amount of I/O space to
reserve for the space. */
/*
* Initialize the data and return the amount of I/O space to
* reserve for the space.
*/
unsigned int (*init_data)(struct si_sm_data *smi,
struct si_sm_io *io);
/* Start a new transaction in the state machine. This will
return -2 if the state machine is not idle, -1 if the size
is invalid (to large or too small), or 0 if the transaction
is successfully completed. */
/*
* Start a new transaction in the state machine. This will
* return -2 if the state machine is not idle, -1 if the size
* is invalid (to large or too small), or 0 if the transaction
* is successfully completed.
*/
int (*start_transaction)(struct si_sm_data *smi,
unsigned char *data, unsigned int size);
/* Return the results after the transaction. This will return
-1 if the buffer is too small, zero if no transaction is
present, or the actual length of the result data. */
/*
* Return the results after the transaction. This will return
* -1 if the buffer is too small, zero if no transaction is
* present, or the actual length of the result data.
*/
int (*get_result)(struct si_sm_data *smi,
unsigned char *data, unsigned int length);
/* Call this periodically (for a polled interface) or upon
receiving an interrupt (for a interrupt-driven interface).
If interrupt driven, you should probably poll this
periodically when not in idle state. This should be called
with the time that passed since the last call, if it is
significant. Time is in microseconds. */
/*
* Call this periodically (for a polled interface) or upon
* receiving an interrupt (for a interrupt-driven interface).
* If interrupt driven, you should probably poll this
* periodically when not in idle state. This should be called
* with the time that passed since the last call, if it is
* significant. Time is in microseconds.
*/
enum si_sm_result (*event)(struct si_sm_data *smi, long time);
/* Attempt to detect an SMI. Returns 0 on success or nonzero
on failure. */
/*
* Attempt to detect an SMI. Returns 0 on success or nonzero
* on failure.
*/
int (*detect)(struct si_sm_data *smi);
/* The interface is shutting down, so clean it up. */
......
drivers/char/ipmi/ipmi_smic_sm.c
View file @ c305e3d3
......@@ -85,6 +85,7 @@ enum smic_states {
/* SMIC Flags Register Bits */
#define SMIC_RX_DATA_READY 0x80
#define SMIC_TX_DATA_READY 0x40
/*
* SMIC_SMI and SMIC_EVM_DATA_AVAIL are only used by
* a few systems, and then only by Systems Management
......@@ -104,8 +105,7 @@ enum smic_states {
#define EC_ILLEGAL_COMMAND 0x04
#define EC_BUFFER_FULL 0x05
struct si_sm_data
{
struct si_sm_data {
enum smic_states state;
struct si_sm_io *io;
unsigned char write_data[MAX_SMIC_WRITE_SIZE];
......@@ -119,7 +119,7 @@ struct si_sm_data
long smic_timeout;
};
static unsigned int init_smic_data (struct si_sm_data *smic,
static unsigned int init_smic_data(struct si_sm_data *smic,
struct si_sm_io *io)
{
smic->state = SMIC_IDLE;
......@@ -150,11 +150,10 @@ static int start_smic_transaction(struct si_sm_data *smic,
return IPMI_NOT_IN_MY_STATE_ERR;
if (smic_debug & SMIC_DEBUG_MSG) {
printk(KERN_INFO "start_smic_transaction -");
for (i = 0; i < size; i ++) {
printk (" %02x", (unsigned char) (data [i]));
}
printk ("\n");
printk(KERN_DEBUG "start_smic_transaction -");
for (i = 0; i < size; i++)
printk(" %02x", (unsigned char) data[i]);
printk("\n");
}
smic->error_retries = 0;
memcpy(smic->write_data, data, size);
......@@ -173,11 +172,10 @@ static int smic_get_result(struct si_sm_data *smic,
int i;
if (smic_debug & SMIC_DEBUG_MSG) {
printk (KERN_INFO "smic_get result -");
for (i = 0; i < smic->read_pos; i ++) {
printk (" %02x", (smic->read_data [i]));
}
printk ("\n");
printk(KERN_DEBUG "smic_get result -");
for (i = 0; i < smic->read_pos; i++)
printk(" %02x", smic->read_data[i]);
printk("\n");
}
if (length < smic->read_pos) {
smic->read_pos = length;
......@@ -223,7 +221,7 @@ static inline void write_smic_control(struct si_sm_data *smic,
smic->io->outputb(smic->io, 1, control);
}
static inline void write_si_sm_data (struct si_sm_data *smic,
static inline void write_si_sm_data(struct si_sm_data *smic,
unsigned char data)
{
smic->io->outputb(smic->io, 0, data);
......@@ -233,10 +231,9 @@ static inline void start_error_recovery(struct si_sm_data *smic, char *reason)
{
(smic->error_retries)++;
if (smic->error_retries > SMIC_MAX_ERROR_RETRIES) {
if (smic_debug & SMIC_DEBUG_ENABLE) {
if (smic_debug & SMIC_DEBUG_ENABLE)
printk(KERN_WARNING
"ipmi_smic_drv: smic hosed: %s\n", reason);
}
smic->state = SMIC_HOSED;
} else {
smic->write_count = smic->orig_write_count;
......@@ -254,14 +251,14 @@ static inline void write_next_byte(struct si_sm_data *smic)
(smic->write_count)--;
}
static inline void read_next_byte (struct si_sm_data *smic)
static inline void read_next_byte(struct si_sm_data *smic)
{
if (smic->read_pos >= MAX_SMIC_READ_SIZE) {
read_smic_data (smic);
read_smic_data(smic);
smic->truncated = 1;
} else {
smic->read_data[smic->read_pos] = read_smic_data(smic);
(smic->read_pos)++;
smic->read_pos++;
}
}
......@@ -336,7 +333,7 @@ static inline void read_next_byte (struct si_sm_data *smic)
SMIC_SC_SMS_RD_END 0xC6
*/
static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
static enum si_sm_result smic_event(struct si_sm_data *smic, long time)
{
unsigned char status;
unsigned char flags;
......@@ -347,13 +344,15 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
return SI_SM_HOSED;
}
if (smic->state != SMIC_IDLE) {
if (smic_debug & SMIC_DEBUG_STATES) {
printk(KERN_INFO
if (smic_debug & SMIC_DEBUG_STATES)
printk(KERN_DEBUG
"smic_event - smic->smic_timeout = %ld,"
" time = %ld\n",
smic->smic_timeout, time);
}
/* FIXME: smic_event is sometimes called with time > SMIC_RETRY_TIMEOUT */
/*
* FIXME: smic_event is sometimes called with time >
* SMIC_RETRY_TIMEOUT
*/
if (time < SMIC_RETRY_TIMEOUT) {
smic->smic_timeout -= time;
if (smic->smic_timeout < 0) {
......@@ -366,9 +365,9 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
if (flags & SMIC_FLAG_BSY)
return SI_SM_CALL_WITH_DELAY;
status = read_smic_status (smic);
status = read_smic_status(smic);
if (smic_debug & SMIC_DEBUG_STATES)
printk(KERN_INFO
printk(KERN_DEBUG
"smic_event - state = %d, flags = 0x%02x,"
" status = 0x%02x\n",
smic->state, flags, status);
......@@ -377,9 +376,7 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
case SMIC_IDLE:
/* in IDLE we check for available messages */
if (flags & SMIC_SMS_DATA_AVAIL)
{
return SI_SM_ATTN;
}
return SI_SM_IDLE;
case SMIC_START_OP:
......@@ -411,8 +408,10 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
"status != SMIC_SC_SMS_WR_START");
return SI_SM_CALL_WITH_DELAY;
}
/* we must not issue WR_(NEXT|END) unless
TX_DATA_READY is set */
/*
* we must not issue WR_(NEXT|END) unless
* TX_DATA_READY is set
* */
if (flags & SMIC_TX_DATA_READY) {
if (smic->write_count == 1) {
/* last byte */
......@@ -424,10 +423,8 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
}
write_next_byte(smic);
write_smic_flags(smic, flags | SMIC_FLAG_BSY);
}
else {
} else
return SI_SM_CALL_WITH_DELAY;
}
break;
case SMIC_WRITE_NEXT:
......@@ -442,22 +439,19 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
if (smic->write_count == 1) {
write_smic_control(smic, SMIC_CC_SMS_WR_END);
smic->state = SMIC_WRITE_END;
}
else {
} else {
write_smic_control(smic, SMIC_CC_SMS_WR_NEXT);
smic->state = SMIC_WRITE_NEXT;
}
write_next_byte(smic);
write_smic_flags(smic, flags | SMIC_FLAG_BSY);
}
else {
} else
return SI_SM_CALL_WITH_DELAY;
}
break;
case SMIC_WRITE_END:
if (status != SMIC_SC_SMS_WR_END) {
start_error_recovery (smic,
start_error_recovery(smic,
"state = SMIC_WRITE_END, "
"status != SMIC_SC_SMS_WR_END");
return SI_SM_CALL_WITH_DELAY;
......@@ -465,29 +459,28 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
/* data register holds an error code */
data = read_smic_data(smic);
if (data != 0) {
if (smic_debug & SMIC_DEBUG_ENABLE) {
printk(KERN_INFO
if (smic_debug & SMIC_DEBUG_ENABLE)
printk(KERN_DEBUG
"SMIC_WRITE_END: data = %02x\n", data);
}
start_error_recovery(smic,
"state = SMIC_WRITE_END, "
"data != SUCCESS");
return SI_SM_CALL_WITH_DELAY;
} else {
} else
smic->state = SMIC_WRITE2READ;
}
break;
case SMIC_WRITE2READ:
/* we must wait for RX_DATA_READY to be set before we
can continue */
/*
* we must wait for RX_DATA_READY to be set before we
* can continue
*/
if (flags & SMIC_RX_DATA_READY) {
write_smic_control(smic, SMIC_CC_SMS_RD_START);
write_smic_flags(smic, flags | SMIC_FLAG_BSY);
smic->state = SMIC_READ_START;
} else {
} else
return SI_SM_CALL_WITH_DELAY;
}
break;
case SMIC_READ_START:
......@@ -502,15 +495,16 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
write_smic_control(smic, SMIC_CC_SMS_RD_NEXT);
write_smic_flags(smic, flags | SMIC_FLAG_BSY);
smic->state = SMIC_READ_NEXT;
} else {
} else
return SI_SM_CALL_WITH_DELAY;
}
break;
case SMIC_READ_NEXT:
switch (status) {
/* smic tells us that this is the last byte to be read
--> clean up */
/*
* smic tells us that this is the last byte to be read
* --> clean up
*/
case SMIC_SC_SMS_RD_END:
read_next_byte(smic);
write_smic_control(smic, SMIC_CC_SMS_RD_END);
......@@ -523,9 +517,8 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
write_smic_control(smic, SMIC_CC_SMS_RD_NEXT);
write_smic_flags(smic, flags | SMIC_FLAG_BSY);
smic->state = SMIC_READ_NEXT;
} else {
} else
return SI_SM_CALL_WITH_DELAY;
}
break;
default:
start_error_recovery(
......@@ -546,10 +539,9 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
data = read_smic_data(smic);
/* data register holds an error code */
if (data != 0) {
if (smic_debug & SMIC_DEBUG_ENABLE) {
printk(KERN_INFO
if (smic_debug & SMIC_DEBUG_ENABLE)
printk(KERN_DEBUG
"SMIC_READ_END: data = %02x\n", data);
}
start_error_recovery(smic,
"state = SMIC_READ_END, "
"data != SUCCESS");
......@@ -565,7 +557,7 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
default:
if (smic_debug & SMIC_DEBUG_ENABLE) {
printk(KERN_WARNING "smic->state = %d\n", smic->state);
printk(KERN_DEBUG "smic->state = %d\n", smic->state);
start_error_recovery(smic, "state = UNKNOWN");
return SI_SM_CALL_WITH_DELAY;
}
......@@ -576,10 +568,12 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
static int smic_detect(struct si_sm_data *smic)
{
/* It's impossible for the SMIC fnags register to be all 1's,
(assuming a properly functioning, self-initialized BMC)
but that's what you get from reading a bogus address, so we
test that first. */
/*
* It's impossible for the SMIC fnags register to be all 1's,
* (assuming a properly functioning, self-initialized BMC)
* but that's what you get from reading a bogus address, so we
* test that first.
*/
if (read_smic_flags(smic) == 0xff)
return 1;
......@@ -595,8 +589,7 @@ static int smic_size(void)
return sizeof(struct si_sm_data);
}
struct si_sm_handlers smic_smi_handlers =
{
struct si_sm_handlers smic_smi_handlers = {
.init_data = init_smic_data,
.start_transaction = start_smic_transaction,
.get_result = smic_get_result,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment