Skip to content

L
linux-davinci
Commit bcb8a0d6 authored by Ben Dooks's avatar Ben Dooks
Browse files
Options

[ARM] S3C: Merge next-s3c64xx-dma2 into for-rmk-devel 

Merge branch 'next-s3c64xx-dma2' into for-rmk-devel

Conflicts:

	arch/arm/plat-s3c64xx/Makefile
parents 543899f6 0b13406a
Expand all Show whitespace changes
Inline Side-by-side
Showing with 1476 additions and 378 deletions
arch/arm/include/asm/hardware/pl080.h 0 → 100644
View file @ bcb8a0d6
/* arch/arm/include/asm/hardware/pl080.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* ARM PrimeCell PL080 DMA controller
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/* Note, there are some Samsung updates to this controller block which
* make it not entierly compatible with the PL080 specification from
* ARM. When in doubt, check the Samsung documentation first.
*
* The Samsung defines are PL080S, and add an extra controll register,
* the ability to move more than 2^11 counts of data and some extra
* OneNAND features.
*/
#define PL080_INT_STATUS (0x00)
#define PL080_TC_STATUS (0x04)
#define PL080_TC_CLEAR (0x08)
#define PL080_ERR_STATUS (0x0C)
#define PL080_ERR_CLEAR (0x10)
#define PL080_RAW_TC_STATUS (0x14)
#define PL080_RAW_ERR_STATUS (0x18)
#define PL080_EN_CHAN (0x1c)
#define PL080_SOFT_BREQ (0x20)
#define PL080_SOFT_SREQ (0x24)
#define PL080_SOFT_LBREQ (0x28)
#define PL080_SOFT_LSREQ (0x2C)
#define PL080_CONFIG (0x30)
#define PL080_CONFIG_M2_BE (1 << 2)
#define PL080_CONFIG_M1_BE (1 << 1)
#define PL080_CONFIG_ENABLE (1 << 0)
#define PL080_SYNC (0x34)
/* Per channel configuration registers */
#define PL008_Cx_STRIDE (0x20)
#define PL080_Cx_BASE(x) ((0x100 + (x * 0x20)))
#define PL080_Cx_SRC_ADDR(x) ((0x100 + (x * 0x20)))
#define PL080_Cx_DST_ADDR(x) ((0x104 + (x * 0x20)))
#define PL080_Cx_LLI(x) ((0x108 + (x * 0x20)))
#define PL080_Cx_CONTROL(x) ((0x10C + (x * 0x20)))
#define PL080_Cx_CONFIG(x) ((0x110 + (x * 0x20)))
#define PL080S_Cx_CONTROL2(x) ((0x110 + (x * 0x20)))
#define PL080S_Cx_CONFIG(x) ((0x114 + (x * 0x20)))
#define PL080_CH_SRC_ADDR (0x00)
#define PL080_CH_DST_ADDR (0x04)
#define PL080_CH_LLI (0x08)
#define PL080_CH_CONTROL (0x0C)
#define PL080_CH_CONFIG (0x10)
#define PL080S_CH_CONTROL2 (0x10)
#define PL080S_CH_CONFIG (0x14)
#define PL080_LLI_ADDR_MASK (0x3fffffff << 2)
#define PL080_LLI_ADDR_SHIFT (2)
#define PL080_LLI_LM_AHB2 (1 << 0)
#define PL080_CONTROL_TC_IRQ_EN (1 << 31)
#define PL080_CONTROL_PROT_MASK (0x7 << 28)
#define PL080_CONTROL_PROT_SHIFT (28)
#define PL080_CONTROL_PROT_SYS (1 << 28)
#define PL080_CONTROL_DST_INCR (1 << 27)
#define PL080_CONTROL_SRC_INCR (1 << 26)
#define PL080_CONTROL_DST_AHB2 (1 << 25)
#define PL080_CONTROL_SRC_AHB2 (1 << 24)
#define PL080_CONTROL_DWIDTH_MASK (0x7 << 21)
#define PL080_CONTROL_DWIDTH_SHIFT (21)
#define PL080_CONTROL_SWIDTH_MASK (0x7 << 18)
#define PL080_CONTROL_SWIDTH_SHIFT (18)
#define PL080_CONTROL_DB_SIZE_MASK (0x7 << 15)
#define PL080_CONTROL_DB_SIZE_SHIFT (15)
#define PL080_CONTROL_SB_SIZE_MASK (0x7 << 12)
#define PL080_CONTROL_SB_SIZE_SHIFT (12)
#define PL080_CONTROL_TRANSFER_SIZE_MASK (0xfff << 0)
#define PL080_CONTROL_TRANSFER_SIZE_SHIFT (0)
#define PL080_BSIZE_1 (0x0)
#define PL080_BSIZE_4 (0x1)
#define PL080_BSIZE_8 (0x2)
#define PL080_BSIZE_16 (0x3)
#define PL080_BSIZE_32 (0x4)
#define PL080_BSIZE_64 (0x5)
#define PL080_BSIZE_128 (0x6)
#define PL080_BSIZE_256 (0x7)
#define PL080_WIDTH_8BIT (0x0)
#define PL080_WIDTH_16BIT (0x1)
#define PL080_WIDTH_32BIT (0x2)
#define PL080_CONFIG_HALT (1 << 18)
#define PL080_CONFIG_ACTIVE (1 << 17) /* RO */
#define PL080_CONFIG_LOCK (1 << 16)
#define PL080_CONFIG_TC_IRQ_MASK (1 << 15)
#define PL080_CONFIG_ERR_IRQ_MASK (1 << 14)
#define PL080_CONFIG_FLOW_CONTROL_MASK (0x7 << 11)
#define PL080_CONFIG_FLOW_CONTROL_SHIFT (11)
#define PL080_CONFIG_DST_SEL_MASK (0xf << 6)
#define PL080_CONFIG_DST_SEL_SHIFT (6)
#define PL080_CONFIG_SRC_SEL_MASK (0xf << 1)
#define PL080_CONFIG_SRC_SEL_SHIFT (1)
#define PL080_CONFIG_ENABLE (1 << 0)
#define PL080_FLOW_MEM2MEM (0x0)
#define PL080_FLOW_MEM2PER (0x1)
#define PL080_FLOW_PER2MEM (0x2)
#define PL080_FLOW_SRC2DST (0x3)
#define PL080_FLOW_SRC2DST_DST (0x4)
#define PL080_FLOW_MEM2PER_PER (0x5)
#define PL080_FLOW_PER2MEM_PER (0x6)
#define PL080_FLOW_SRC2DST_SRC (0x7)
/* DMA linked list chain structure */
struct pl080_lli {
u32 src_addr;
u32 dst_addr;
u32 next_lli;
u32 control0;
};
struct pl080s_lli {
u32 src_addr;
u32 dst_addr;
u32 next_lli;
u32 control0;
u32 control1;
};
arch/arm/mach-s3c2410/dma.c
View file @ bcb8a0d6
......@@ -17,14 +17,16 @@
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <plat/cpu.h>
#include <plat/dma.h>
#include <plat/dma-plat.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
......
arch/arm/mach-s3c2410/include/mach/dma.h
View file @ bcb8a0d6
......@@ -3,7 +3,7 @@
* Copyright (C) 2003,2004,2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Samsung S3C241XX DMA support
* Samsung S3C24XX DMA support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -13,8 +13,8 @@
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H __FILE__
#include <plat/dma.h>
#include <linux/sysdev.h>
#include <mach/hardware.h>
#define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */
......@@ -55,9 +55,9 @@ enum dma_ch {
/* we have 4 dma channels */
#ifndef CONFIG_CPU_S3C2443
#define S3C2410_DMA_CHANNELS (4)
#define S3C_DMA_CHANNELS (4)
#else
#define S3C2410_DMA_CHANNELS (6)
#define S3C_DMA_CHANNELS (6)
#endif
/* types */
......@@ -68,7 +68,6 @@ enum s3c2410_dma_state {
S3C2410_DMA_PAUSED
};
/* enum s3c2410_dma_loadst
*
* This represents the state of the DMA engine, wrt to the loaded / running
......@@ -104,32 +103,6 @@ enum s3c2410_dma_loadst {
S3C2410_DMALOAD_1LOADED_1RUNNING,
};
enum s3c2410_dma_buffresult {
S3C2410_RES_OK,
S3C2410_RES_ERR,
S3C2410_RES_ABORT
};
enum s3c2410_dmasrc {
S3C2410_DMASRC_HW, /* source is memory */
S3C2410_DMASRC_MEM /* source is hardware */
};
/* enum s3c2410_chan_op
*
* operation codes passed to the DMA code by the user, and also used
* to inform the current channel owner of any changes to the system state
*/
enum s3c2410_chan_op {
S3C2410_DMAOP_START,
S3C2410_DMAOP_STOP,
S3C2410_DMAOP_PAUSE,
S3C2410_DMAOP_RESUME,
S3C2410_DMAOP_FLUSH,
S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */
S3C2410_DMAOP_STARTED, /* indicate channel started */
};
/* flags */
......@@ -139,17 +112,14 @@ enum s3c2410_chan_op {
/* dma buffer */
struct s3c2410_dma_client {
char *name;
};
struct s3c2410_dma_buf;
/* s3c2410_dma_buf_s
/* s3c2410_dma_buf
*
* internally used buffer structure to describe a queued or running
* buffer.
*/
struct s3c2410_dma_buf;
struct s3c2410_dma_buf {
struct s3c2410_dma_buf *next;
int magic; /* magic */
......@@ -161,20 +131,6 @@ struct s3c2410_dma_buf {
/* [1] is this updated for both recv/send modes? */
struct s3c2410_dma_chan;
/* s3c2410_dma_cbfn_t
*
* buffer callback routine type
*/
typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
void *buf, int size,
enum s3c2410_dma_buffresult result);
typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
enum s3c2410_chan_op );
struct s3c2410_dma_stats {
unsigned long loads;
unsigned long timeout_longest;
......@@ -206,10 +162,10 @@ struct s3c2410_dma_chan {
/* channel configuration */
enum s3c2410_dmasrc source;
enum dma_ch req_ch;
unsigned long dev_addr;
unsigned long load_timeout;
unsigned int flags; /* channel flags */
unsigned int hw_cfg; /* last hw config */
struct s3c24xx_dma_map *map; /* channel hw maps */
......@@ -236,213 +192,6 @@ struct s3c2410_dma_chan {
struct sys_device dev;
};
/* the currently allocated channel information */
extern struct s3c2410_dma_chan s3c2410_chans[];
/* note, we don't really use dma_device_t at the moment */
typedef unsigned long dma_device_t;
/* functions --------------------------------------------------------------- */
/* s3c2410_dma_request
*
* request a dma channel exclusivley
*/
extern int s3c2410_dma_request(unsigned int channel,
struct s3c2410_dma_client *, void *dev);
/* s3c2410_dma_ctrl
*
* change the state of the dma channel
*/
extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
/* s3c2410_dma_setflags
*
* set the channel's flags to a given state
*/
extern int s3c2410_dma_setflags(unsigned int channel,
unsigned int flags);
/* s3c2410_dma_free
*
* free the dma channel (will also abort any outstanding operations)
*/
extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
/* s3c2410_dma_enqueue
*
* place the given buffer onto the queue of operations for the channel.
* The buffer must be allocated from dma coherent memory, or the Dcache/WB
* drained before the buffer is given to the DMA system.
*/
extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
dma_addr_t data, int size);
/* s3c2410_dma_config
*
* configure the dma channel
*/
extern int s3c2410_dma_config(unsigned int channel, int xferunit, int dcon);
/* s3c2410_dma_devconfig
*
* configure the device we're talking to
*/
extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
int hwcfg, unsigned long devaddr);
/* s3c2410_dma_getposition
*
* get the position that the dma transfer is currently at
*/
extern int s3c2410_dma_getposition(unsigned int channel,
dma_addr_t *src, dma_addr_t *dest);
extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
/* DMA Register definitions */
#define S3C2410_DMA_DISRC (0x00)
#define S3C2410_DMA_DISRCC (0x04)
#define S3C2410_DMA_DIDST (0x08)
#define S3C2410_DMA_DIDSTC (0x0C)
#define S3C2410_DMA_DCON (0x10)
#define S3C2410_DMA_DSTAT (0x14)
#define S3C2410_DMA_DCSRC (0x18)
#define S3C2410_DMA_DCDST (0x1C)
#define S3C2410_DMA_DMASKTRIG (0x20)
#define S3C2412_DMA_DMAREQSEL (0x24)
#define S3C2443_DMA_DMAREQSEL (0x24)
#define S3C2410_DISRCC_INC (1<<0)
#define S3C2410_DISRCC_APB (1<<1)
#define S3C2410_DMASKTRIG_STOP (1<<2)
#define S3C2410_DMASKTRIG_ON (1<<1)
#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
#define S3C2410_DCON_DEMAND (0<<31)
#define S3C2410_DCON_HANDSHAKE (1<<31)
#define S3C2410_DCON_SYNC_PCLK (0<<30)
#define S3C2410_DCON_SYNC_HCLK (1<<30)
#define S3C2410_DCON_INTREQ (1<<29)
#define S3C2410_DCON_CH0_XDREQ0 (0<<24)
#define S3C2410_DCON_CH0_UART0 (1<<24)
#define S3C2410_DCON_CH0_SDI (2<<24)
#define S3C2410_DCON_CH0_TIMER (3<<24)
#define S3C2410_DCON_CH0_USBEP1 (4<<24)
#define S3C2410_DCON_CH1_XDREQ1 (0<<24)
#define S3C2410_DCON_CH1_UART1 (1<<24)
#define S3C2410_DCON_CH1_I2SSDI (2<<24)
#define S3C2410_DCON_CH1_SPI (3<<24)
#define S3C2410_DCON_CH1_USBEP2 (4<<24)
#define S3C2410_DCON_CH2_I2SSDO (0<<24)
#define S3C2410_DCON_CH2_I2SSDI (1<<24)
#define S3C2410_DCON_CH2_SDI (2<<24)
#define S3C2410_DCON_CH2_TIMER (3<<24)
#define S3C2410_DCON_CH2_USBEP3 (4<<24)
#define S3C2410_DCON_CH3_UART2 (0<<24)
#define S3C2410_DCON_CH3_SDI (1<<24)
#define S3C2410_DCON_CH3_SPI (2<<24)
#define S3C2410_DCON_CH3_TIMER (3<<24)
#define S3C2410_DCON_CH3_USBEP4 (4<<24)
#define S3C2410_DCON_SRCSHIFT (24)
#define S3C2410_DCON_SRCMASK (7<<24)
#define S3C2410_DCON_BYTE (0<<20)
#define S3C2410_DCON_HALFWORD (1<<20)
#define S3C2410_DCON_WORD (2<<20)
#define S3C2410_DCON_AUTORELOAD (0<<22)
#define S3C2410_DCON_NORELOAD (1<<22)
#define S3C2410_DCON_HWTRIG (1<<23)
#ifdef CONFIG_CPU_S3C2440
#define S3C2440_DIDSTC_CHKINT (1<<2)
#define S3C2440_DCON_CH0_I2SSDO (5<<24)
#define S3C2440_DCON_CH0_PCMIN (6<<24)
#define S3C2440_DCON_CH1_PCMOUT (5<<24)
#define S3C2440_DCON_CH1_SDI (6<<24)
#define S3C2440_DCON_CH2_PCMIN (5<<24)
#define S3C2440_DCON_CH2_MICIN (6<<24)
#define S3C2440_DCON_CH3_MICIN (5<<24)
#define S3C2440_DCON_CH3_PCMOUT (6<<24)
#endif
#ifdef CONFIG_CPU_S3C2412
#define S3C2412_DMAREQSEL_SRC(x) ((x)<<1)
#define S3C2412_DMAREQSEL_HW (1)
#define S3C2412_DMAREQSEL_SPI0TX S3C2412_DMAREQSEL_SRC(0)
#define S3C2412_DMAREQSEL_SPI0RX S3C2412_DMAREQSEL_SRC(1)
#define S3C2412_DMAREQSEL_SPI1TX S3C2412_DMAREQSEL_SRC(2)
#define S3C2412_DMAREQSEL_SPI1RX S3C2412_DMAREQSEL_SRC(3)
#define S3C2412_DMAREQSEL_I2STX S3C2412_DMAREQSEL_SRC(4)
#define S3C2412_DMAREQSEL_I2SRX S3C2412_DMAREQSEL_SRC(5)
#define S3C2412_DMAREQSEL_TIMER S3C2412_DMAREQSEL_SRC(9)
#define S3C2412_DMAREQSEL_SDI S3C2412_DMAREQSEL_SRC(10)
#define S3C2412_DMAREQSEL_USBEP1 S3C2412_DMAREQSEL_SRC(13)
#define S3C2412_DMAREQSEL_USBEP2 S3C2412_DMAREQSEL_SRC(14)
#define S3C2412_DMAREQSEL_USBEP3 S3C2412_DMAREQSEL_SRC(15)
#define S3C2412_DMAREQSEL_USBEP4 S3C2412_DMAREQSEL_SRC(16)
#define S3C2412_DMAREQSEL_XDREQ0 S3C2412_DMAREQSEL_SRC(17)
#define S3C2412_DMAREQSEL_XDREQ1 S3C2412_DMAREQSEL_SRC(18)
#define S3C2412_DMAREQSEL_UART0_0 S3C2412_DMAREQSEL_SRC(19)
#define S3C2412_DMAREQSEL_UART0_1 S3C2412_DMAREQSEL_SRC(20)
#define S3C2412_DMAREQSEL_UART1_0 S3C2412_DMAREQSEL_SRC(21)
#define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22)
#define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23)
#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24)
#endif
#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1)
#define S3C2443_DMAREQSEL_HW (1)
#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0)
#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1)
#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2)
#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3)
#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4)
#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5)
#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9)
#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10)
#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17)
#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18)
#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19)
#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20)
#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21)
#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22)
#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23)
#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24)
#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25)
#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26)
#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27)
#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28)
#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29)
#endif /* __ASM_ARCH_DMA_H */
arch/arm/mach-s3c2412/dma.c
View file @ bcb8a0d6
......@@ -20,12 +20,13 @@
#include <mach/dma.h>
#include <plat/dma.h>
#include <plat/dma-plat.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
......
arch/arm/mach-s3c2440/dma.c
View file @ bcb8a0d6
......@@ -17,14 +17,16 @@
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <plat/dma.h>
#include <plat/dma-plat.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
......
arch/arm/mach-s3c2443/dma.c
View file @ bcb8a0d6
......@@ -20,12 +20,13 @@
#include <mach/dma.h>
#include <plat/dma.h>
#include <plat/dma-plat.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
......
arch/arm/mach-s3c6400/include/mach/dma.h
View file @ bcb8a0d6
......@@ -11,6 +11,63 @@
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H __FILE__
/* currently nothing here, placeholder */
#define S3C_DMA_CHANNELS (16)
/* see mach-s3c2410/dma.h for notes on dma channel numbers */
/* Note, for the S3C64XX architecture we keep the DMACH_
* defines in the order they are allocated to [S]DMA0/[S]DMA1
* so that is easy to do DHACH_ -> DMA controller conversion
*/
enum dma_ch {
/* DMA0/SDMA0 */
DMACH_UART0 = 0,
DMACH_UART0_SRC2,
DMACH_UART1,
DMACH_UART1_SRC2,
DMACH_UART2,
DMACH_UART2_SRC2,
DMACH_UART3,
DMACH_UART3_SRC2,
DMACH_PCM0_TX,
DMACH_PCM0_RX,
DMACH_I2S0_OUT,
DMACH_I2S0_IN,
DMACH_SPI0_TX,
DMACH_SPI0_RX,
DMACH_HSI_I2SV40_TX,
DMACH_HSI_I2SV40_RX,
/* DMA1/SDMA1 */
DMACH_PCM1_TX = 16,
DMACH_PCM1_RX,
DMACH_I2S1_OUT,
DMACH_I2S1_IN,
DMACH_SPI1_TX,
DMACH_SPI1_RX,
DMACH_AC97_PCMOUT,
DMACH_AC97_PCMIN,
DMACH_AC97_MICIN,
DMACH_PWM,
DMACH_IRDA,
DMACH_EXTERNAL,
DMACH_RES1,
DMACH_RES2,
DMACH_SECURITY_RX, /* SDMA1 only */
DMACH_SECURITY_TX, /* SDMA1 only */
DMACH_MAX /* the end */
};
static __inline__ int s3c_dma_has_circular(void)
{
/* we will be supporting ciruclar buffers as soon as we have DMA
* engine support.
*/
return 1;
}
#define S3C2410_DMAF_CIRCULAR (1 << 0)
#include <plat/dma.h>
#endif /* __ASM_ARCH_IRQ_H */
arch/arm/plat-s3c/Kconfig
View file @ bcb8a0d6
......@@ -159,6 +159,13 @@ config S3C_GPIO_CFG_S3C64XX
Internal configuration to enable S3C64XX style GPIO configuration
functions.
# DMA
config S3C_DMA
bool
help
Internal configuration for S3C DMA core
# device definitions to compile in
config S3C_DEV_HSMMC
......
arch/arm/plat-s3c/Makefile
View file @ bcb8a0d6
......@@ -18,6 +18,10 @@ obj-y += pwm-clock.o
obj-y += gpio.o
obj-y += gpio-config.o
# DMA support
obj-$(CONFIG_S3C_DMA) += dma.o
# PM support
obj-$(CONFIG_PM) += pm.o
......
arch/arm/plat-s3c/dma.c 0 → 100644
View file @ bcb8a0d6
/* linux/arch/arm/plat-s3c/dma.c
*
* Copyright (c) 2003-2005,2006,2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C DMA core
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
struct s3c2410_dma_buf;
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <mach/dma.h>
#include <mach/irqs.h>
#include <plat/dma-plat.h>
/* dma channel state information */
struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX];
/* s3c_dma_lookup_channel
*
* change the dma channel number given into a real dma channel id
*/
struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel)
{
if (channel & DMACH_LOW_LEVEL)
return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
else
return s3c_dma_chan_map[channel];
}
/* do we need to protect the settings of the fields from
* irq?
*/
int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
if (chan == NULL)
return -EINVAL;
pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
chan->op_fn = rtn;
return 0;
}
EXPORT_SYMBOL(s3c2410_dma_set_opfn);
int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
if (chan == NULL)
return -EINVAL;
pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
chan->callback_fn = rtn;
return 0;
}
EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
if (chan == NULL)
return -EINVAL;
chan->flags = flags;
return 0;
}
EXPORT_SYMBOL(s3c2410_dma_setflags);
arch/arm/plat-s3c/include/plat/dma-core.h 0 → 100644
View file @ bcb8a0d6
/* arch/arm/plat-s3c/include/plat/dma.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* Samsung S3C DMA core support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
extern struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel);
extern struct s3c2410_dma_chan *s3c_dma_chan_map[];
/* the currently allocated channel information */
extern struct s3c2410_dma_chan s3c2410_chans[];
arch/arm/plat-s3c/include/plat/dma.h 0 → 100644
View file @ bcb8a0d6
/* arch/arm/plat-s3c/include/plat/dma.h
*
* Copyright (C) 2003,2004,2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Samsung S3C DMA support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
enum s3c2410_dma_buffresult {
S3C2410_RES_OK,
S3C2410_RES_ERR,
S3C2410_RES_ABORT
};
enum s3c2410_dmasrc {
S3C2410_DMASRC_HW, /* source is memory */
S3C2410_DMASRC_MEM /* source is hardware */
};
/* enum s3c2410_chan_op
*
* operation codes passed to the DMA code by the user, and also used
* to inform the current channel owner of any changes to the system state
*/
enum s3c2410_chan_op {
S3C2410_DMAOP_START,
S3C2410_DMAOP_STOP,
S3C2410_DMAOP_PAUSE,
S3C2410_DMAOP_RESUME,
S3C2410_DMAOP_FLUSH,
S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */
S3C2410_DMAOP_STARTED, /* indicate channel started */
};
struct s3c2410_dma_client {
char *name;
};
struct s3c2410_dma_chan;
/* s3c2410_dma_cbfn_t
*
* buffer callback routine type
*/
typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
void *buf, int size,
enum s3c2410_dma_buffresult result);
typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
enum s3c2410_chan_op );
/* s3c2410_dma_request
*
* request a dma channel exclusivley
*/
extern int s3c2410_dma_request(unsigned int channel,
struct s3c2410_dma_client *, void *dev);
/* s3c2410_dma_ctrl
*
* change the state of the dma channel
*/
extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
/* s3c2410_dma_setflags
*
* set the channel's flags to a given state
*/
extern int s3c2410_dma_setflags(unsigned int channel,
unsigned int flags);
/* s3c2410_dma_free
*
* free the dma channel (will also abort any outstanding operations)
*/
extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
/* s3c2410_dma_enqueue
*
* place the given buffer onto the queue of operations for the channel.
* The buffer must be allocated from dma coherent memory, or the Dcache/WB
* drained before the buffer is given to the DMA system.
*/
extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
dma_addr_t data, int size);
/* s3c2410_dma_config
*
* configure the dma channel
*/
extern int s3c2410_dma_config(unsigned int channel, int xferunit);
/* s3c2410_dma_devconfig
*
* configure the device we're talking to
*/
extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
unsigned long devaddr);
/* s3c2410_dma_getposition
*
* get the position that the dma transfer is currently at
*/
extern int s3c2410_dma_getposition(unsigned int channel,
dma_addr_t *src, dma_addr_t *dest);
extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
arch/arm/plat-s3c24xx/Kconfig
View file @ bcb8a0d6
......@@ -71,6 +71,7 @@ config PM_SIMTEC
config S3C2410_DMA
bool "S3C2410 DMA support"
depends on ARCH_S3C2410
select S3C_DMA
help
S3C2410 DMA support. This is needed for drivers like sound which
use the S3C2410's DMA system to move data to and from the
......
arch/arm/plat-s3c24xx/dma.c
View file @ bcb8a0d6
......@@ -31,10 +31,10 @@
#include <asm/irq.h>
#include <mach/hardware.h>
#include <mach/dma.h>
#include <mach/map.h>
#include <plat/dma.h>
#include <plat/dma-plat.h>
#include <plat/regs-dma.h>
/* io map for dma */
static void __iomem *dma_base;
......@@ -44,8 +44,6 @@ static int dma_channels;
static struct s3c24xx_dma_selection dma_sel;
/* dma channel state information */
struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
/* debugging functions */
......@@ -135,21 +133,6 @@ dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
#define dbg_showchan(chan) do { } while(0)
#endif /* CONFIG_S3C2410_DMA_DEBUG */
static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX];
/* lookup_dma_channel
*
* change the dma channel number given into a real dma channel id
*/
static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel)
{
if (channel & DMACH_LOW_LEVEL)
return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
else
return dma_chan_map[channel];
}
/* s3c2410_dma_stats_timeout
*
* Update DMA stats from timeout info
......@@ -214,8 +197,6 @@ s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
return 0;
}
/* s3c2410_dma_loadbuffer
*
* load a buffer, and update the channel state
......@@ -453,7 +434,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
int s3c2410_dma_enqueue(unsigned int channel, void *id,
dma_addr_t data, int size)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
struct s3c2410_dma_buf *buf;
unsigned long flags;
......@@ -804,7 +785,7 @@ EXPORT_SYMBOL(s3c2410_dma_request);
int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
unsigned long flags;
if (chan == NULL)
......@@ -836,7 +817,7 @@ int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
chan->irq_claimed = 0;
if (!(channel & DMACH_LOW_LEVEL))
dma_chan_map[channel] = NULL;
s3c_dma_chan_map[channel] = NULL;
local_irq_restore(flags);
......@@ -995,7 +976,7 @@ static int s3c2410_dma_started(struct s3c2410_dma_chan *chan)
int
s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
if (chan == NULL)
return -EINVAL;
......@@ -1038,14 +1019,13 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl);
/* s3c2410_dma_config
*
* xfersize: size of unit in bytes (1,2,4)
* dcon: base value of the DCONx register
*/
int s3c2410_dma_config(unsigned int channel,
int xferunit,
int dcon)
int xferunit)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
unsigned int dcon;
pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
__func__, channel, xferunit, dcon);
......@@ -1055,10 +1035,33 @@ int s3c2410_dma_config(unsigned int channel,
pr_debug("%s: Initial dcon is %08x\n", __func__, dcon);
dcon |= chan->dcon & dma_sel.dcon_mask;
dcon = chan->dcon & dma_sel.dcon_mask;
pr_debug("%s: New dcon is %08x\n", __func__, dcon);
switch (chan->req_ch) {
case DMACH_I2S_IN:
case DMACH_I2S_OUT:
case DMACH_PCM_IN:
case DMACH_PCM_OUT:
case DMACH_MIC_IN:
default:
dcon |= S3C2410_DCON_HANDSHAKE;
dcon |= S3C2410_DCON_SYNC_PCLK;
break;
case DMACH_SDI:
/* note, ensure if need HANDSHAKE or not */
dcon |= S3C2410_DCON_SYNC_PCLK;
break;
case DMACH_XD0:
case DMACH_XD1:
dcon |= S3C2410_DCON_HANDSHAKE;
dcon |= S3C2410_DCON_SYNC_HCLK;
break;
}
switch (xferunit) {
case 1:
dcon |= S3C2410_DCON_BYTE;
......@@ -1090,58 +1093,6 @@ int s3c2410_dma_config(unsigned int channel,
EXPORT_SYMBOL(s3c2410_dma_config);
int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
if (chan == NULL)
return -EINVAL;
pr_debug("%s: chan=%p, flags=%08x\n", __func__, chan, flags);
chan->flags = flags;
return 0;
}
EXPORT_SYMBOL(s3c2410_dma_setflags);
/* do we need to protect the settings of the fields from
* irq?
*/
int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
if (chan == NULL)
return -EINVAL;
pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
chan->op_fn = rtn;
return 0;
}
EXPORT_SYMBOL(s3c2410_dma_set_opfn);
int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
if (chan == NULL)
return -EINVAL;
pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
chan->callback_fn = rtn;
return 0;
}
EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
/* s3c2410_dma_devconfig
*
......@@ -1150,29 +1101,38 @@ EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
* source: S3C2410_DMASRC_HW: source is hardware
* S3C2410_DMASRC_MEM: source is memory
*
* hwcfg: the value for xxxSTCn register,
* bit 0: 0=increment pointer, 1=leave pointer
* bit 1: 0=source is AHB, 1=source is APB
*
* devaddr: physical address of the source
*/
int s3c2410_dma_devconfig(int channel,
enum s3c2410_dmasrc source,
int hwcfg,
unsigned long devaddr)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
unsigned int hwcfg;
if (chan == NULL)
return -EINVAL;
pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
__func__, (int)source, hwcfg, devaddr);
pr_debug("%s: source=%d, devaddr=%08lx\n",
__func__, (int)source, devaddr);
chan->source = source;
chan->dev_addr = devaddr;
chan->hw_cfg = hwcfg;
switch (chan->req_ch) {
case DMACH_XD0:
case DMACH_XD1:
hwcfg = 0; /* AHB */
break;
default:
hwcfg = S3C2410_DISRCC_APB;
}
/* always assume our peripheral desintation is a fixed
* address in memory. */
hwcfg |= S3C2410_DISRCC_INC;
switch (source) {
case S3C2410_DMASRC_HW:
......@@ -1219,7 +1179,7 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig);
int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *dst)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
if (chan == NULL)
return -EINVAL;
......@@ -1278,8 +1238,8 @@ static int s3c2410_dma_resume(struct sys_device *dev)
printk(KERN_INFO "dma%d: restoring configuration\n", cp->number);
s3c2410_dma_config(no, cp->xfer_unit, cp->dcon);
s3c2410_dma_devconfig(no, cp->source, cp->hw_cfg, cp->dev_addr);
s3c2410_dma_config(no, cp->xfer_unit);
s3c2410_dma_devconfig(no, cp->source, cp->dev_addr);
/* re-select the dma source for this channel */
......@@ -1476,7 +1436,8 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
found:
dmach = &s3c2410_chans[ch];
dmach->map = ch_map;
dma_chan_map[channel] = dmach;
dmach->req_ch = channel;
s3c_dma_chan_map[channel] = dmach;
/* select the channel */
......
arch/arm/plat-s3c24xx/include/plat/dma.h → arch/arm/plat-s3c24xx/include/plat/dma-plat.h
View file @ bcb8a0d6
/* linux/include/asm-arm/plat-s3c24xx/dma.h
/* linux/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
*
* Copyright (C) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
......@@ -10,8 +10,10 @@
* published by the Free Software Foundation.
*/
#include <plat/dma-core.h>
extern struct sysdev_class dma_sysclass;
extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
#define DMA_CH_VALID (1<<31)
#define DMA_CH_NEVER (1<<30)
......@@ -31,8 +33,8 @@ struct s3c24xx_dma_map {
const char *name;
struct s3c24xx_dma_addr hw_addr;
unsigned long channels[S3C2410_DMA_CHANNELS];
unsigned long channels_rx[S3C2410_DMA_CHANNELS];
unsigned long channels[S3C_DMA_CHANNELS];
unsigned long channels_rx[S3C_DMA_CHANNELS];
};
struct s3c24xx_dma_selection {
......@@ -58,7 +60,7 @@ extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
*/
struct s3c24xx_dma_order_ch {
unsigned int list[S3C2410_DMA_CHANNELS]; /* list of channels */
unsigned int list[S3C_DMA_CHANNELS]; /* list of channels */
unsigned int flags; /* flags */
};
......
arch/arm/plat-s3c24xx/include/plat/regs-dma.h 0 → 100644
View file @ bcb8a0d6
/* arch/arm/mach-s3c2410/include/mach/dma.h
*
* Copyright (C) 2003,2004,2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Samsung S3C24XX DMA support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/* DMA Register definitions */
#define S3C2410_DMA_DISRC (0x00)
#define S3C2410_DMA_DISRCC (0x04)
#define S3C2410_DMA_DIDST (0x08)
#define S3C2410_DMA_DIDSTC (0x0C)
#define S3C2410_DMA_DCON (0x10)
#define S3C2410_DMA_DSTAT (0x14)
#define S3C2410_DMA_DCSRC (0x18)
#define S3C2410_DMA_DCDST (0x1C)
#define S3C2410_DMA_DMASKTRIG (0x20)
#define S3C2412_DMA_DMAREQSEL (0x24)
#define S3C2443_DMA_DMAREQSEL (0x24)
#define S3C2410_DISRCC_INC (1<<0)
#define S3C2410_DISRCC_APB (1<<1)
#define S3C2410_DMASKTRIG_STOP (1<<2)
#define S3C2410_DMASKTRIG_ON (1<<1)
#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
#define S3C2410_DCON_DEMAND (0<<31)
#define S3C2410_DCON_HANDSHAKE (1<<31)
#define S3C2410_DCON_SYNC_PCLK (0<<30)
#define S3C2410_DCON_SYNC_HCLK (1<<30)
#define S3C2410_DCON_INTREQ (1<<29)
#define S3C2410_DCON_CH0_XDREQ0 (0<<24)
#define S3C2410_DCON_CH0_UART0 (1<<24)
#define S3C2410_DCON_CH0_SDI (2<<24)
#define S3C2410_DCON_CH0_TIMER (3<<24)
#define S3C2410_DCON_CH0_USBEP1 (4<<24)
#define S3C2410_DCON_CH1_XDREQ1 (0<<24)
#define S3C2410_DCON_CH1_UART1 (1<<24)
#define S3C2410_DCON_CH1_I2SSDI (2<<24)
#define S3C2410_DCON_CH1_SPI (3<<24)
#define S3C2410_DCON_CH1_USBEP2 (4<<24)
#define S3C2410_DCON_CH2_I2SSDO (0<<24)
#define S3C2410_DCON_CH2_I2SSDI (1<<24)
#define S3C2410_DCON_CH2_SDI (2<<24)
#define S3C2410_DCON_CH2_TIMER (3<<24)
#define S3C2410_DCON_CH2_USBEP3 (4<<24)
#define S3C2410_DCON_CH3_UART2 (0<<24)
#define S3C2410_DCON_CH3_SDI (1<<24)
#define S3C2410_DCON_CH3_SPI (2<<24)
#define S3C2410_DCON_CH3_TIMER (3<<24)
#define S3C2410_DCON_CH3_USBEP4 (4<<24)
#define S3C2410_DCON_SRCSHIFT (24)
#define S3C2410_DCON_SRCMASK (7<<24)
#define S3C2410_DCON_BYTE (0<<20)
#define S3C2410_DCON_HALFWORD (1<<20)
#define S3C2410_DCON_WORD (2<<20)
#define S3C2410_DCON_AUTORELOAD (0<<22)
#define S3C2410_DCON_NORELOAD (1<<22)
#define S3C2410_DCON_HWTRIG (1<<23)
#ifdef CONFIG_CPU_S3C2440
#define S3C2440_DIDSTC_CHKINT (1<<2)
#define S3C2440_DCON_CH0_I2SSDO (5<<24)
#define S3C2440_DCON_CH0_PCMIN (6<<24)
#define S3C2440_DCON_CH1_PCMOUT (5<<24)
#define S3C2440_DCON_CH1_SDI (6<<24)
#define S3C2440_DCON_CH2_PCMIN (5<<24)
#define S3C2440_DCON_CH2_MICIN (6<<24)
#define S3C2440_DCON_CH3_MICIN (5<<24)
#define S3C2440_DCON_CH3_PCMOUT (6<<24)
#endif
#ifdef CONFIG_CPU_S3C2412
#define S3C2412_DMAREQSEL_SRC(x) ((x)<<1)
#define S3C2412_DMAREQSEL_HW (1)
#define S3C2412_DMAREQSEL_SPI0TX S3C2412_DMAREQSEL_SRC(0)
#define S3C2412_DMAREQSEL_SPI0RX S3C2412_DMAREQSEL_SRC(1)
#define S3C2412_DMAREQSEL_SPI1TX S3C2412_DMAREQSEL_SRC(2)
#define S3C2412_DMAREQSEL_SPI1RX S3C2412_DMAREQSEL_SRC(3)
#define S3C2412_DMAREQSEL_I2STX S3C2412_DMAREQSEL_SRC(4)
#define S3C2412_DMAREQSEL_I2SRX S3C2412_DMAREQSEL_SRC(5)
#define S3C2412_DMAREQSEL_TIMER S3C2412_DMAREQSEL_SRC(9)
#define S3C2412_DMAREQSEL_SDI S3C2412_DMAREQSEL_SRC(10)
#define S3C2412_DMAREQSEL_USBEP1 S3C2412_DMAREQSEL_SRC(13)
#define S3C2412_DMAREQSEL_USBEP2 S3C2412_DMAREQSEL_SRC(14)
#define S3C2412_DMAREQSEL_USBEP3 S3C2412_DMAREQSEL_SRC(15)
#define S3C2412_DMAREQSEL_USBEP4 S3C2412_DMAREQSEL_SRC(16)
#define S3C2412_DMAREQSEL_XDREQ0 S3C2412_DMAREQSEL_SRC(17)
#define S3C2412_DMAREQSEL_XDREQ1 S3C2412_DMAREQSEL_SRC(18)
#define S3C2412_DMAREQSEL_UART0_0 S3C2412_DMAREQSEL_SRC(19)
#define S3C2412_DMAREQSEL_UART0_1 S3C2412_DMAREQSEL_SRC(20)
#define S3C2412_DMAREQSEL_UART1_0 S3C2412_DMAREQSEL_SRC(21)
#define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22)
#define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23)
#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24)
#endif
#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1)
#define S3C2443_DMAREQSEL_HW (1)
#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0)
#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1)
#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2)
#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3)
#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4)
#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5)
#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9)
#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10)
#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17)
#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18)
#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19)
#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20)
#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21)
#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22)
#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23)
#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24)
#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25)
#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26)
#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27)
#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28)
#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29)
arch/arm/plat-s3c64xx/Kconfig
View file @ bcb8a0d6
......@@ -39,6 +39,10 @@ config CPU_S3C6400_CLOCK
Common clock support code for the S3C6400 that is shared
by other CPUs in the series, such as the S3C6410.
config S3C64XX_DMA
bool "S3C64XX DMA"
select S3C_DMA
# platform specific device setup
config S3C64XX_SETUP_I2C0
......
arch/arm/plat-s3c64xx/Makefile
View file @ bcb8a0d6
......@@ -30,6 +30,10 @@ obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += sleep.o
obj-$(CONFIG_PM) += irq-pm.o
# DMA support
obj-$(CONFIG_S3C64XX_DMA) += dma.o
# Device setup
obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
......
arch/arm/plat-s3c64xx/dma.c 0 → 100644
View file @ bcb8a0d6
This diff is collapsed.
arch/arm/plat-s3c64xx/include/plat/dma-plat.h 0 → 100644
View file @ bcb8a0d6
/* linux/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
*
* Copyright 2009 Openmoko, Inc.
* Copyright 2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C64XX DMA core
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
struct s3c64xx_dma_buff;
/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
* @next: Pointer to next buffer in queue or ring.
* @pw: Client provided identifier
* @lli: Pointer to hardware descriptor this buffer is associated with.
* @lli_dma: Hardare address of the descriptor.
*/
struct s3c64xx_dma_buff {
struct s3c64xx_dma_buff *next;
void *pw;
struct pl080_lli *lli;
dma_addr_t lli_dma;
};
struct s3c64xx_dmac;
struct s3c2410_dma_chan {
unsigned char number; /* number of this dma channel */
unsigned char in_use; /* channel allocated */
unsigned char bit; /* bit for enable/disable/etc */
unsigned char hw_width;
unsigned char peripheral;
unsigned int flags;
enum s3c2410_dmasrc source;
dma_addr_t dev_addr;
struct s3c2410_dma_client *client;
struct s3c64xx_dmac *dmac; /* pointer to controller */
void __iomem *regs;
/* cdriver callbacks */
s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */
s3c2410_dma_opfn_t op_fn; /* channel op callback */
/* buffer list and information */
struct s3c64xx_dma_buff *curr; /* current dma buffer */
struct s3c64xx_dma_buff *next; /* next buffer to load */
struct s3c64xx_dma_buff *end; /* end of queue */
/* note, when channel is running in circular mode, curr is the
* first buffer enqueued, end is the last and curr is where the
* last buffer-done event is set-at. The buffers are not freed
* and the last buffer hardware descriptor points back to the
* first.
*/
};
#include <plat/dma-core.h>
drivers/mmc/host/s3cmci.c
View file @ bcb8a0d6
......@@ -789,7 +789,7 @@ static void s3cmci_dma_setup(struct s3cmci_host *host,
last_source = source;
s3c2410_dma_devconfig(host->dma, source, 3,
s3c2410_dma_devconfig(host->dma, source,
host->mem->start + host->sdidata);
if (!setup_ok) {
......
sound/soc/s3c24xx/s3c24xx-pcm.c
View file @ bcb8a0d6
......@@ -218,24 +218,17 @@ static int s3c24xx_pcm_prepare(struct snd_pcm_substream *substream)
* sync to pclk, half-word transfers to the IIS-FIFO. */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
s3c2410_dma_devconfig(prtd->params->channel,
S3C2410_DMASRC_MEM, S3C2410_DISRCC_INC |
S3C2410_DISRCC_APB, prtd->params->dma_addr);
s3c2410_dma_config(prtd->params->channel,
prtd->params->dma_size,
S3C2410_DCON_SYNC_PCLK |
S3C2410_DCON_HANDSHAKE);
S3C2410_DMASRC_MEM,
prtd->params->dma_addr);
} else {
s3c2410_dma_config(prtd->params->channel,
prtd->params->dma_size,
S3C2410_DCON_HANDSHAKE |
S3C2410_DCON_SYNC_PCLK);
s3c2410_dma_devconfig(prtd->params->channel,
S3C2410_DMASRC_HW, 0x3,
S3C2410_DMASRC_HW,
prtd->params->dma_addr);
}
s3c2410_dma_config(prtd->params->channel,
prtd->params->dma_size);
/* flush the DMA channel */
s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
prtd->dma_loaded = 0;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment