Commit b739db79 authored by Linus Torvalds's avatar Linus Torvalds

Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6

parents 18539966 41d9c98f
......@@ -36,6 +36,10 @@ Module Parameters
(default is 1)
Use 'init=0' to bypass initializing the chip.
Try this if your computer crashes when you load the module.
* reset: int
(default is 0)
The driver used to reset the chip on load, but does no more. Use
'reset=1' to restore the old behavior. Report if you need to do this.
Description
-----------
......
......@@ -1186,6 +1186,7 @@ static int __init sm_it87_init(void)
static void __exit sm_it87_exit(void)
{
if (isa_address)
i2c_isa_del_driver(&it87_isa_driver);
i2c_del_driver(&it87_driver);
}
......
......@@ -437,12 +437,12 @@ static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
show_temp, NULL, offset - 1); \
static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
show_temp_max, set_temp_max, offset - 1); \
static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \
static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \
show_temp_min, set_temp_min, offset - 1)
static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp0, NULL);
static DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, show_temp0_max, set_temp0_max);
static DEVICE_ATTR(temp1_min, S_IRUGO | S_IWUSR, show_temp0_min, set_temp0_min);
static DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, show_temp0_min, set_temp0_min);
define_temperature_sysfs(2);
define_temperature_sysfs(3);
......@@ -451,7 +451,7 @@ define_temperature_sysfs(5);
define_temperature_sysfs(6);
#define CFG_INFO_TEMP(id) { &sensor_dev_attr_temp##id##_input.dev_attr, \
&sensor_dev_attr_temp##id##_min.dev_attr, \
&sensor_dev_attr_temp##id##_max_hyst.dev_attr, \
&sensor_dev_attr_temp##id##_max.dev_attr }
#define CFG_INFO_VOLT(id) { &sensor_dev_attr_in##id##_input.dev_attr, \
&sensor_dev_attr_in##id##_min.dev_attr, \
......@@ -464,7 +464,7 @@ struct str_device_attr_table {
};
static struct str_device_attr_table cfg_info_temp[] = {
{ &dev_attr_temp1_input, &dev_attr_temp1_min, &dev_attr_temp1_max },
{ &dev_attr_temp1_input, &dev_attr_temp1_max_hyst, &dev_attr_temp1_max },
CFG_INFO_TEMP(2),
CFG_INFO_TEMP(3),
CFG_INFO_TEMP(4),
......
......@@ -95,11 +95,16 @@ MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
(0x39)))
#define W83781D_REG_CONFIG 0x40
/* Interrupt status (W83781D, AS99127F) */
#define W83781D_REG_ALARM1 0x41
#define W83781D_REG_ALARM2 0x42
#define W83781D_REG_ALARM3 0x450 /* not on W83781D */
#define W83781D_REG_IRQ 0x4C
/* Real-time status (W83782D, W83783S, W83627HF) */
#define W83782D_REG_ALARM1 0x459
#define W83782D_REG_ALARM2 0x45A
#define W83782D_REG_ALARM3 0x45B
#define W83781D_REG_BEEP_CONFIG 0x4D
#define W83781D_REG_BEEP_INTS1 0x56
#define W83781D_REG_BEEP_INTS2 0x57
......@@ -1513,15 +1518,6 @@ w83781d_init_client(struct i2c_client *client)
W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
}
}
if (type != w83781d) {
/* enable comparator mode for temp2 and temp3 so
alarm indication will work correctly */
i = w83781d_read_value(client, W83781D_REG_IRQ);
if (!(i & 0x40))
w83781d_write_value(client, W83781D_REG_IRQ,
i | 0x40);
}
}
/* Start monitoring */
......@@ -1612,14 +1608,25 @@ static struct w83781d_data *w83781d_update_device(struct device *dev)
data->fan_div[1] |= (i >> 4) & 0x04;
data->fan_div[2] |= (i >> 5) & 0x04;
}
data->alarms =
w83781d_read_value(client,
W83781D_REG_ALARM1) +
(w83781d_read_value(client, W83781D_REG_ALARM2) << 8);
if ((data->type == w83782d) || (data->type == w83627hf)) {
data->alarms |=
w83781d_read_value(client,
W83781D_REG_ALARM3) << 16;
data->alarms = w83781d_read_value(client,
W83782D_REG_ALARM1)
| (w83781d_read_value(client,
W83782D_REG_ALARM2) << 8)
| (w83781d_read_value(client,
W83782D_REG_ALARM3) << 16);
} else if (data->type == w83783s) {
data->alarms = w83781d_read_value(client,
W83782D_REG_ALARM1)
| (w83781d_read_value(client,
W83782D_REG_ALARM2) << 8);
} else {
/* No real-time status registers, fall back to
interrupt status registers */
data->alarms = w83781d_read_value(client,
W83781D_REG_ALARM1)
| (w83781d_read_value(client,
W83781D_REG_ALARM2) << 8);
}
i = w83781d_read_value(client, W83781D_REG_BEEP_INTS2);
data->beep_enable = i >> 7;
......
......@@ -72,16 +72,6 @@ static ssize_t show_adapter_name(struct device *dev,
}
static DEVICE_ATTR(name, S_IRUGO, show_adapter_name, NULL);
static int i2c_isa_device_probe(struct device *dev)
{
return -ENODEV;
}
static int i2c_isa_device_remove(struct device *dev)
{
return 0;
}
/* We implement an interface which resembles i2c_{add,del}_driver,
but for i2c-isa drivers. We don't have to remember and handle lists
......@@ -93,8 +83,6 @@ int i2c_isa_add_driver(struct i2c_driver *driver)
/* Add the driver to the list of i2c drivers in the driver core */
driver->driver.bus = &i2c_bus_type;
driver->driver.probe = i2c_isa_device_probe;
driver->driver.remove = i2c_isa_device_remove;
res = driver_register(&driver->driver);
if (res)
return res;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment