Skip to content

L
linux-davinci
Commit b6a235b1 authored by Johannes Stezenbach's avatar Johannes Stezenbach Committed by Linus Torvalds
Browse files
Options

[PATCH] dvb: drop obsolete dibusb driver 

Remove the dibusb driver which has been obsoleted by the generalized dvb-usb
driver.
Signed-off-by: default avatarPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: default avatarJohannes Stezenbach <js@linuxtv.org>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 3e05d2b8
Show whitespace changes
Inline Side-by-side
Showing with 1 addition and 2981 deletions
Documentation/dvb/README.dibusb deleted 100644 → 0
View file @ 3e05d2b8
Documentation for dib3000* frontend drivers and dibusb device driver
====================================================================
Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de),
dibusb and dib3000mb/mc drivers based on GPL code, which has
Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr)
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation, version 2.
Supported devices USB1.1
========================
Produced and reselled by Twinhan:
---------------------------------
- TwinhanDTV USB-Ter DVB-T Device (VP7041)
http://www.twinhan.com/product_terrestrial_3.asp
- TwinhanDTV Magic Box (VP7041e)
http://www.twinhan.com/product_terrestrial_4.asp
- HAMA DVB-T USB device
http://www.hama.de/portal/articleId*110620/action*2598
- CTS Portable (Chinese Television System) (2)
http://www.2cts.tv/ctsportable/
- Unknown USB DVB-T device with vendor ID Hyper-Paltek
Produced and reselled by KWorld:
--------------------------------
- KWorld V-Stream XPERT DTV DVB-T USB
http://www.kworld.com.tw/en/product/DVBT-USB/DVBT-USB.html
- JetWay DTV DVB-T USB
http://www.jetway.com.tw/evisn/product/lcd-tv/DVT-USB/dtv-usb.htm
- ADSTech Instant TV DVB-T USB
http://www.adstech.com/products/PTV-333/intro/PTV-333_intro.asp?pid=PTV-333
Others:
-------
- Ultima Electronic/Artec T1 USB TVBOX (AN2135, AN2235, AN2235 with Panasonic Tuner)
http://82.161.246.249/products-tvbox.html
- Compro Videomate DVB-U2000 - DVB-T USB (2)
http://www.comprousa.com/products/vmu2000.htm
- Grandtec USB DVB-T
http://www.grand.com.tw/
- Avermedia AverTV DVBT USB (2)
http://www.avermedia.com/
- DiBcom USB DVB-T reference device (non-public)
Supported devices USB2.0
========================
- Twinhan MagicBox II (2)
http://www.twinhan.com/product_terrestrial_7.asp
- Hanftek UMT-010 (1)
http://www.globalsources.com/si/6008819757082/ProductDetail/Digital-TV/product_id-100046529
- Typhoon/Yakumo/HAMA DVB-T mobile USB2.0 (1)
http://www.yakumo.de/produkte/index.php?pid=1&ag=DVB-T
- Artec T1 USB TVBOX (FX2) (2)
- Hauppauge WinTV NOVA-T USB2
http://www.hauppauge.com/
- KWorld/ADSTech Instant DVB-T USB2.0 (DiB3000M-B)
- DiBcom USB2.0 DVB-T reference device (non-public)
1) It is working almost.
2) No test reports received yet.
0. NEWS:
2005-02-11 - added support for the KWorld/ADSTech Instant DVB-T USB2.0. Thanks a lot to Joachim von Caron
2005-02-02 - added support for the Hauppauge Win-TV Nova-T USB2
2005-01-31 - distorted streaming is finally gone for USB1.1 devices
2005-01-13 - moved the mirrored pid_filter_table back to dvb-dibusb
- first almost working version for HanfTek UMT-010
- found out, that Yakumo/HAMA/Typhoon are predessors of the HanfTek UMT-010
2005-01-10 - refactoring completed, now everything is very delightful
- tuner quirks for some weird devices (Artec T1 AN2235 device has sometimes a
Panasonic Tuner assembled). Tunerprobing implemented. Thanks a lot to Gunnar Wittich.
2004-12-29 - after several days of struggling around bug of no returning URBs fixed.
2004-12-26 - refactored the dibusb-driver, splitted into separate files
- i2c-probing enabled
2004-12-06 - possibility for demod i2c-address probing
- new usb IDs (Compro,Artec)
2004-11-23 - merged changes from DiB3000MC_ver2.1
- revised the debugging
- possibility to deliver the complete TS for USB2.0
2004-11-21 - first working version of the dib3000mc/p frontend driver.
2004-11-12 - added additional remote control keys. Thanks to Uwe Hanke.
2004-11-07 - added remote control support. Thanks to David Matthews.
2004-11-05 - added support for a new devices (Grandtec/Avermedia/Artec)
- merged my changes (for dib3000mb/dibusb) to the FE_REFACTORING, because it became HEAD
- moved transfer control (pid filter, fifo control) from usb driver to frontend, it seems
better settled there (added xfer_ops-struct)
- created a common files for frontends (mc/p/mb)
2004-09-28 - added support for a new device (Unkown, vendor ID is Hyper-Paltek)
2004-09-20 - added support for a new device (Compro DVB-U2000), thanks
to Amaury Demol for reporting
- changed usb TS transfer method (several urbs, stopping transfer
before setting a new pid)
2004-09-13 - added support for a new device (Artec T1 USB TVBOX), thanks
to Christian Motschke for reporting
2004-09-05 - released the dibusb device and dib3000mb-frontend driver
(old news for vp7041.c)
2004-07-15 - found out, by accident, that the device has a TUA6010XS for
PLL
2004-07-12 - figured out, that the driver should also work with the
CTS Portable (Chinese Television System)
2004-07-08 - firmware-extraction-2.422-problem solved, driver is now working
properly with firmware extracted from 2.422
- #if for 2.6.4 (dvb), compile issue
- changed firmware handling, see vp7041.txt sec 1.1
2004-07-02 - some tuner modifications, v0.1, cleanups, first public
2004-06-28 - now using the dvb_dmx_swfilter_packets, everything
runs fine now
2004-06-27 - able to watch and switching channels (pre-alpha)
- no section filtering yet
2004-06-06 - first TS received, but kernel oops :/
2004-05-14 - firmware loader is working
2004-05-11 - start writing the driver
1. How to use?
NOTE: This driver was developed using Linux 2.6.6.,
it is working with 2.6.7 and above.
Linux 2.4.x support is not planned, but patches are very welcome.
NOTE: I'm using Debian testing, so the following explaination (especially
the hotplug-path) needn't match your system, but probably it will :).
The driver is included in the kernel since Linux 2.6.10.
1.1. Firmware
The USB driver needs to download a firmware to start working.
You can either use "get_dvb_firmware dibusb" to download the firmware or you
can get it directly via
for USB1.1 (AN2135)
http://www.linuxtv.org/downloads/firmware/dvb-dibusb-5.0.0.11.fw
for USB1.1 (AN2235) (a few Artec T1 devices)
http://www.linuxtv.org/downloads/firmware/dvb-dibusb-an2235-1.fw
for USB2.0 (FX2) Hauppauge, DiBcom
http://www.linuxtv.org/downloads/firmware/dvb-dibusb-6.0.0.5.fw
for USB2.0 ADSTech/Kworld USB2.0
http://www.linuxtv.org/downloads/firmware/dvb-dibusb-adstech-usb2-1.fw
for USB2.0 HanfTek
http://www.linuxtv.org/downloads/firmware/dvb-dibusb-an2235-1.fw
1.2. Compiling
Since the driver is in the linux kernel, activating the driver in
your favorite config-environment should sufficient. I recommend
to compile the driver as module. Hotplug does the rest.
1.3. Loading the drivers
Hotplug is able to load the driver, when it is needed (because you plugged
in the device).
If you want to enable debug output, you have to load the driver manually and
from withing the dvb-kernel cvs repository.
first have a look, which debug level are available:
modinfo dib3000mb
modinfo dib3000-common
modinfo dib3000mc
modinfo dvb-dibusb
modprobe dib3000-common debug=<level>
modprobe dib3000mb debug=<level>
modprobe dib3000mc debug=<level>
modprobe dvb-dibusb debug=<level>
should do the trick.
When the driver is loaded successfully, the firmware file was in
the right place and the device is connected, the "Power"-LED should be
turned on.
At this point you should be able to start a dvb-capable application. For myself
I used mplayer, dvbscan, tzap and kaxtv, they are working. Using the device
in vdr is working now also.
2. Known problems and bugs
- Don't remove the USB device while running an DVB application, your system will die.
2.1. Adding support for devices
It is not possible to determine the range of devices based on the DiBcom
reference designs. This is because the reference design of DiBcom can be sold
to thirds, without telling DiBcom (so done with the Twinhan VP7041 and
the HAMA device).
When you think you have a device like this and the driver does not recognizes it,
please send the ****load*.inf and the ****cap*.inf of the Windows driver to me.
Sometimes the Vendor or Product ID is identical to the ones of Twinhan, even
though it is not a Twinhan device (e.g. HAMA), then please send me the name
of the device. I will add it to this list in order to make this clear to
others.
If you are familar with C you can also add the VID and PID of the device to
the dvb-dibusb-core.c-file and create a patch and send it over to me or to
the linux-dvb mailing list, _after_ you have tried compiling and modprobing
it.
2.2. USB1.1 Bandwidth limitation
Most of the currently supported devices are USB1.1 and thus they have a
maximum bandwidth of about 5-6 MBit/s when connected to a USB2.0 hub.
This is not enough for receiving the complete transport stream of a
DVB-T channel (which can be about 16 MBit/s). Normally this is not a
problem, if you only want to watch TV (this does not apply for HDTV),
but watching a channel while recording another channel on the same
frequency simply does not work very well. This applies to all USB1.1
DVB-T devices, not just dibusb)
Update: For the USB1.1 and VDR some work has been done (patches and comments
are still very welcome). Maybe the problem is solved in the meantime because I
now use the dmx_sw_filter function instead of dmx_sw_filter_packet. I hope the
linux-dvb software filter is able to get the best of the garbled TS.
The bug, where the TS is distorted by a heavy usage of the device is gone
definitely. All dibusb-devices I was using (Twinhan, Kworld, DiBcom) are
working like charm now with VDR. Sometimes I even was able to record a channel
and watch another one.
2.3. Comments
Patches, comments and suggestions are very very welcome.
3. Acknowledgements
Amaury Demol (ademol@dibcom.fr) and Francois Kanounnikoff from DiBcom for
providing specs, code and help, on which the dvb-dibusb, dib3000mb and
dib3000mc are based.
David Matthews for identifying a new device type (Artec T1 with AN2235)
and for extending dibusb with remote control event handling. Thank you.
Alex Woods for frequently answering question about usb and dvb
stuff, a big thank you.
Bernd Wagner for helping with huge bug reports and discussions.
Gunnar Wittich and Joachim von Caron for their trust for giving me
root-shells on their machines to implement support for new devices.
Some guys on the linux-dvb mailing list for encouraging me
Peter Schildmann >peter.schildmann-nospam-at-web.de< for his
user-level firmware loader, which saves a lot of time
(when writing the vp7041 driver)
Ulf Hermenau for helping me out with traditional chinese.
Andr Smoktun and Christian Frmmel for supporting me with
hardware and listening to my problems very patient
drivers/media/dvb/Kconfig
View file @ b6a235b1
......@@ -29,7 +29,6 @@ comment "Supported USB Adapters"
depends on DVB_CORE && USB
source "drivers/media/dvb/ttusb-budget/Kconfig"
source "drivers/media/dvb/ttusb-dec/Kconfig"
source "drivers/media/dvb/dibusb/Kconfig"
source "drivers/media/dvb/cinergyT2/Kconfig"
comment "Supported FlexCopII (B2C2) Adapters"
......
drivers/media/dvb/Makefile
View file @ b6a235b1
......@@ -2,4 +2,4 @@
# Makefile for the kernel multimedia device drivers.
#
obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dibusb/ cinergyT2/
obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ cinergyT2/
drivers/media/dvb/dibusb/Kconfig deleted 100644 → 0
View file @ 3e05d2b8
config DVB_DIBUSB
tristate "DiBcom USB DVB-T devices (see help for a complete device list)"
depends on DVB_CORE && USB
select FW_LOADER
select DVB_DIB3000MB
select DVB_DIB3000MC
select DVB_MT352
help
Support for USB 1.1 and 2.0 DVB-T devices based on reference designs made by
DiBcom (http://www.dibcom.fr) and C&E.
Devices supported by this driver:
TwinhanDTV USB-Ter (VP7041)
TwinhanDTV Magic Box (VP7041e)
KWorld/JetWay/ADSTech V-Stream XPERT DTV - DVB-T USB1.1 and USB2.0
Hama DVB-T USB-Box
DiBcom reference devices (non-public)
Ultima Electronic/Artec T1 USB TVBOX
Compro Videomate DVB-U2000 - DVB-T USB
Grandtec DVB-T USB
Avermedia AverTV DVBT USB
Artec T1 USB1.1 and USB2.0 boxes
Yakumo/Typhoon DVB-T USB2.0
Hanftek UMT-010 USB2.0
Hauppauge WinTV NOVA-T USB2
The VP7041 seems to be identical to "CTS Portable" (Chinese
Television System).
These devices can be understood as budget ones, they "only" deliver
(a part of) the MPEG2 transport stream.
A firmware is needed to get the device working. See Documentation/dvb/README.dibusb
details.
Say Y if you own such a device and want to use it. You should build it as
a module.
config DVB_DIBUSB_MISDESIGNED_DEVICES
bool "Enable support for some misdesigned (see help) devices, which identify with wrong IDs"
depends on DVB_DIBUSB
help
Somehow Artec/Ultima Electronic forgot to program the eeprom of some of their
USB1.1/USB2.0 devices.
So comes that they identify with the default Vendor and Product ID of the Cypress
CY7C64613 (AN2235) or Cypress FX2.
Affected device IDs:
0x0574:0x2235 (Artec T1 USB1.1, cold)
0x04b4:0x8613 (Artec T1 USB2.0, cold)
0x0574:0x1002 (Artec T1 USB2.0, warm)
0x0574:0x2131 (aged DiBcom USB1.1 test device)
Say Y if your device has one of the mentioned IDs.
config DVB_DIBCOM_DEBUG
bool "Enable extended debug support for DiBcom USB device"
depends on DVB_DIBUSB
help
Say Y if you want to enable debuging. See modinfo dvb-dibusb for
debug levels.
drivers/media/dvb/dibusb/Makefile deleted 100644 → 0
View file @ 3e05d2b8
dvb-dibusb-objs = dvb-dibusb-core.o \
dvb-dibusb-dvb.o \
dvb-dibusb-fe-i2c.o \
dvb-dibusb-firmware.o \
dvb-dibusb-remote.o \
dvb-dibusb-usb.o \
dvb-fe-dtt200u.o
obj-$(CONFIG_DVB_DIBUSB) += dvb-dibusb.o
EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
drivers/media/dvb/dibusb/dvb-dibusb-core.c deleted 100644 → 0
View file @ 3e05d2b8
/*
* Driver for mobile USB Budget DVB-T devices based on reference
* design made by DiBcom (http://www.dibcom.fr/)
*
* dvb-dibusb-core.c
*
* Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
*
* based on GPL code from DiBcom, which has
* Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr)
*
* Remote control code added by David Matthews (dm@prolingua.co.uk)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2.
*
* Acknowledgements
*
* Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver
* sources, on which this driver (and the dib3000mb/mc/p frontends) are based.
*
* see Documentation/dvb/README.dibusb for more information
*/
#include "dvb-dibusb.h"
#include <linux/moduleparam.h>
/* debug */
int dvb_dibusb_debug;
module_param_named(debug, dvb_dibusb_debug, int, 0644);
#ifdef CONFIG_DVB_DIBCOM_DEBUG
#define DBSTATUS ""
#else
#define DBSTATUS " (debugging is not enabled)"
#endif
MODULE_PARM_DESC(debug, "set debugging level (1=info,2=xfer,4=alotmore,8=ts,16=err,32=rc (|-able))." DBSTATUS);
#undef DBSTATUS
static int pid_parse;
module_param(pid_parse, int, 0644);
MODULE_PARM_DESC(pid_parse, "enable pid parsing (filtering) when running at USB2.0");
static int rc_query_interval = 100;
module_param(rc_query_interval, int, 0644);
MODULE_PARM_DESC(rc_query_interval, "interval in msecs for remote control query (default: 100; min: 40)");
static int rc_key_repeat_count = 2;
module_param(rc_key_repeat_count, int, 0644);
MODULE_PARM_DESC(rc_key_repeat_count, "how many key repeats will be dropped before passing the key event again (default: 2)");
/* Vendor IDs */
#define USB_VID_ADSTECH 0x06e1
#define USB_VID_ANCHOR 0x0547
#define USB_VID_AVERMEDIA 0x14aa
#define USB_VID_COMPRO 0x185b
#define USB_VID_COMPRO_UNK 0x145f
#define USB_VID_CYPRESS 0x04b4
#define USB_VID_DIBCOM 0x10b8
#define USB_VID_EMPIA 0xeb1a
#define USB_VID_GRANDTEC 0x5032
#define USB_VID_HANFTEK 0x15f4
#define USB_VID_HAUPPAUGE 0x2040
#define USB_VID_HYPER_PALTEK 0x1025
#define USB_VID_IMC_NETWORKS 0x13d3
#define USB_VID_TWINHAN 0x1822
#define USB_VID_ULTIMA_ELECTRONIC 0x05d8
/* Product IDs */
#define USB_PID_ADSTECH_USB2_COLD 0xa333
#define USB_PID_ADSTECH_USB2_WARM 0xa334
#define USB_PID_AVERMEDIA_DVBT_USB_COLD 0x0001
#define USB_PID_AVERMEDIA_DVBT_USB_WARM 0x0002
#define USB_PID_COMPRO_DVBU2000_COLD 0xd000
#define USB_PID_COMPRO_DVBU2000_WARM 0xd001
#define USB_PID_COMPRO_DVBU2000_UNK_COLD 0x010c
#define USB_PID_COMPRO_DVBU2000_UNK_WARM 0x010d
#define USB_PID_DIBCOM_MOD3000_COLD 0x0bb8
#define USB_PID_DIBCOM_MOD3000_WARM 0x0bb9
#define USB_PID_DIBCOM_MOD3001_COLD 0x0bc6
#define USB_PID_DIBCOM_MOD3001_WARM 0x0bc7
#define USB_PID_DIBCOM_ANCHOR_2135_COLD 0x2131
#define USB_PID_GRANDTEC_DVBT_USB_COLD 0x0fa0
#define USB_PID_GRANDTEC_DVBT_USB_WARM 0x0fa1
#define USB_PID_KWORLD_VSTREAM_COLD 0x17de
#define USB_PID_KWORLD_VSTREAM_WARM 0x17df
#define USB_PID_TWINHAN_VP7041_COLD 0x3201
#define USB_PID_TWINHAN_VP7041_WARM 0x3202
#define USB_PID_ULTIMA_TVBOX_COLD 0x8105
#define USB_PID_ULTIMA_TVBOX_WARM 0x8106
#define USB_PID_ULTIMA_TVBOX_AN2235_COLD 0x8107
#define USB_PID_ULTIMA_TVBOX_AN2235_WARM 0x8108
#define USB_PID_ULTIMA_TVBOX_ANCHOR_COLD 0x2235
#define USB_PID_ULTIMA_TVBOX_USB2_COLD 0x8109
#define USB_PID_ULTIMA_TVBOX_USB2_FX_COLD 0x8613
#define USB_PID_ULTIMA_TVBOX_USB2_FX_WARM 0x1002
#define USB_PID_UNK_HYPER_PALTEK_COLD 0x005e
#define USB_PID_UNK_HYPER_PALTEK_WARM 0x005f
#define USB_PID_HANFTEK_UMT_010_COLD 0x0001
#define USB_PID_HANFTEK_UMT_010_WARM 0x0015
#define USB_PID_YAKUMO_DTT200U_COLD 0x0201
#define USB_PID_YAKUMO_DTT200U_WARM 0x0301
#define USB_PID_WINTV_NOVA_T_USB2_COLD 0x9300
#define USB_PID_WINTV_NOVA_T_USB2_WARM 0x9301
/* USB Driver stuff
* table of devices that this driver is working with
*
* ATTENTION: Never ever change the order of this table, the particular
* devices depend on this order
*
* Each entry is used as a reference in the device_struct. Currently this is
* the only non-redundant way of assigning USB ids to actual devices I'm aware
* of, because there is only one place in the code where the assignment of
* vendor and product id is done, here.
*/
static struct usb_device_id dib_table [] = {
/* 00 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_DVBT_USB_COLD)},
/* 01 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_DVBT_USB_WARM)},
/* 02 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_YAKUMO_DTT200U_COLD) },
/* 03 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_YAKUMO_DTT200U_WARM) },
/* 04 */ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_DVBU2000_COLD) },
/* 05 */ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_DVBU2000_WARM) },
/* 06 */ { USB_DEVICE(USB_VID_COMPRO_UNK, USB_PID_COMPRO_DVBU2000_UNK_COLD) },
/* 07 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3000_COLD) },
/* 08 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3000_WARM) },
/* 09 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3001_COLD) },
/* 10 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3001_WARM) },
/* 11 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_KWORLD_VSTREAM_COLD) },
/* 12 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_KWORLD_VSTREAM_WARM) },
/* 13 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB_COLD) },
/* 14 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB_WARM) },
/* 15 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_DIBCOM_MOD3000_COLD) },
/* 16 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_DIBCOM_MOD3000_WARM) },
/* 17 */ { USB_DEVICE(USB_VID_HYPER_PALTEK, USB_PID_UNK_HYPER_PALTEK_COLD) },
/* 18 */ { USB_DEVICE(USB_VID_HYPER_PALTEK, USB_PID_UNK_HYPER_PALTEK_WARM) },
/* 19 */ { USB_DEVICE(USB_VID_IMC_NETWORKS, USB_PID_TWINHAN_VP7041_COLD) },
/* 20 */ { USB_DEVICE(USB_VID_IMC_NETWORKS, USB_PID_TWINHAN_VP7041_WARM) },
/* 21 */ { USB_DEVICE(USB_VID_TWINHAN, USB_PID_TWINHAN_VP7041_COLD) },
/* 22 */ { USB_DEVICE(USB_VID_TWINHAN, USB_PID_TWINHAN_VP7041_WARM) },
/* 23 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_COLD) },
/* 24 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_WARM) },
/* 25 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_COLD) },
/* 26 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_WARM) },
/* 27 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_COLD) },
/* 28 */ { USB_DEVICE(USB_VID_HANFTEK, USB_PID_HANFTEK_UMT_010_COLD) },
/* 29 */ { USB_DEVICE(USB_VID_HANFTEK, USB_PID_HANFTEK_UMT_010_WARM) },
/* 30 */ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_WINTV_NOVA_T_USB2_COLD) },
/* 31 */ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_WINTV_NOVA_T_USB2_WARM) },
/* 32 */ { USB_DEVICE(USB_VID_ADSTECH, USB_PID_ADSTECH_USB2_COLD) },
/* 33 */ { USB_DEVICE(USB_VID_ADSTECH, USB_PID_ADSTECH_USB2_WARM) },
/*
* activate the following define when you have one of the devices and want to
* build it from build-2.6 in dvb-kernel
*/
// #define CONFIG_DVB_DIBUSB_MISDESIGNED_DEVICES
#ifdef CONFIG_DVB_DIBUSB_MISDESIGNED_DEVICES
/* 34 */ { USB_DEVICE(USB_VID_ANCHOR, USB_PID_ULTIMA_TVBOX_ANCHOR_COLD) },
/* 35 */ { USB_DEVICE(USB_VID_CYPRESS, USB_PID_ULTIMA_TVBOX_USB2_FX_COLD) },
/* 36 */ { USB_DEVICE(USB_VID_ANCHOR, USB_PID_ULTIMA_TVBOX_USB2_FX_WARM) },
/* 37 */ { USB_DEVICE(USB_VID_ANCHOR, USB_PID_DIBCOM_ANCHOR_2135_COLD) },
#endif
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, dib_table);
static struct dibusb_usb_controller dibusb_usb_ctrl[] = {
{ .name = "Cypress AN2135", .cpu_cs_register = 0x7f92 },
{ .name = "Cypress AN2235", .cpu_cs_register = 0x7f92 },
{ .name = "Cypress FX2", .cpu_cs_register = 0xe600 },
};
struct dibusb_tuner dibusb_tuner[] = {
{ DIBUSB_TUNER_CABLE_THOMSON,
0x61
},
{ DIBUSB_TUNER_COFDM_PANASONIC_ENV57H1XD5,
0x60
},
{ DIBUSB_TUNER_CABLE_LG_TDTP_E102P,
0x61
},
{ DIBUSB_TUNER_COFDM_PANASONIC_ENV77H11D5,
0x60
},
};
static struct dibusb_demod dibusb_demod[] = {
{ DIBUSB_DIB3000MB,
16,
{ 0x8, 0 },
},
{ DIBUSB_DIB3000MC,
32,
{ 0x9, 0xa, 0xb, 0xc },
},
{ DIBUSB_MT352,
254,
{ 0xf, 0 },
},
{ DTT200U_FE,
8,
{ 0xff,0 }, /* there is no i2c bus in this device */
}
};
static struct dibusb_device_class dibusb_device_classes[] = {
{ .id = DIBUSB1_1, .usb_ctrl = &dibusb_usb_ctrl[0],
.firmware = "dvb-dibusb-5.0.0.11.fw",
.pipe_cmd = 0x01, .pipe_data = 0x02,
.urb_count = 7, .urb_buffer_size = 4096,
DIBUSB_RC_NEC_PROTOCOL,
&dibusb_demod[DIBUSB_DIB3000MB],
&dibusb_tuner[DIBUSB_TUNER_CABLE_THOMSON],
},
{ DIBUSB1_1_AN2235, &dibusb_usb_ctrl[1],
"dvb-dibusb-an2235-1.fw",
0x01, 0x02,
7, 4096,
DIBUSB_RC_NEC_PROTOCOL,
&dibusb_demod[DIBUSB_DIB3000MB],
&dibusb_tuner[DIBUSB_TUNER_CABLE_THOMSON],
},
{ DIBUSB2_0,&dibusb_usb_ctrl[2],
"dvb-dibusb-6.0.0.5.fw",
0x01, 0x06,
7, 4096,
DIBUSB_RC_NEC_PROTOCOL,
&dibusb_demod[DIBUSB_DIB3000MC],
&dibusb_tuner[DIBUSB_TUNER_COFDM_PANASONIC_ENV57H1XD5],
},
{ UMT2_0, &dibusb_usb_ctrl[2],
"dvb-dibusb-umt-2.fw",
0x01, 0x06,
20, 512,
DIBUSB_RC_NO,
&dibusb_demod[DIBUSB_MT352],
&dibusb_tuner[DIBUSB_TUNER_CABLE_LG_TDTP_E102P],
},
{ DIBUSB2_0B,&dibusb_usb_ctrl[2],
"dvb-dibusb-adstech-usb2-1.fw",
0x01, 0x06,
7, 4096,
DIBUSB_RC_NEC_PROTOCOL,
&dibusb_demod[DIBUSB_DIB3000MB],
&dibusb_tuner[DIBUSB_TUNER_CABLE_THOMSON],
},
{ NOVAT_USB2,&dibusb_usb_ctrl[2],
"dvb-dibusb-nova-t-1.fw",
0x01, 0x06,
7, 4096,
DIBUSB_RC_HAUPPAUGE_PROTO,
&dibusb_demod[DIBUSB_DIB3000MC],
&dibusb_tuner[DIBUSB_TUNER_COFDM_PANASONIC_ENV57H1XD5],
},
{ DTT200U,&dibusb_usb_ctrl[2],
"dvb-dtt200u-1.fw",
0x01, 0x02,
7, 4096,
DIBUSB_RC_NO,
&dibusb_demod[DTT200U_FE],
NULL, /* no explicit tuner/pll-programming necessary (it has the ENV57H1XD5) */
},
};
static struct dibusb_usb_device dibusb_devices[] = {
{ "TwinhanDTV USB1.1 / Magic Box / HAMA USB1.1 DVB-T device",
&dibusb_device_classes[DIBUSB1_1],
{ &dib_table[19], &dib_table[21], NULL},
{ &dib_table[20], &dib_table[22], NULL},
},
{ "KWorld V-Stream XPERT DTV - DVB-T USB1.1",
&dibusb_device_classes[DIBUSB1_1],
{ &dib_table[11], NULL },
{ &dib_table[12], NULL },
},
{ "Grandtec USB1.1 DVB-T",
&dibusb_device_classes[DIBUSB1_1],
{ &dib_table[13], &dib_table[15], NULL },
{ &dib_table[14], &dib_table[16], NULL },
},
{ "DiBcom USB1.1 DVB-T reference design (MOD3000)",
&dibusb_device_classes[DIBUSB1_1],
{ &dib_table[7], NULL },
{ &dib_table[8], NULL },
},
{ "Artec T1 USB1.1 TVBOX with AN2135",
&dibusb_device_classes[DIBUSB1_1],
{ &dib_table[23], NULL },
{ &dib_table[24], NULL },
},
{ "Artec T1 USB1.1 TVBOX with AN2235",
&dibusb_device_classes[DIBUSB1_1_AN2235],
{ &dib_table[25], NULL },
{ &dib_table[26], NULL },
},
{ "Avermedia AverTV DVBT USB1.1",
&dibusb_device_classes[DIBUSB1_1],
{ &dib_table[0], NULL },
{ &dib_table[1], NULL },
},
{ "Compro Videomate DVB-U2000 - DVB-T USB1.1 (please confirm to linux-dvb)",
&dibusb_device_classes[DIBUSB1_1],
{ &dib_table[4], &dib_table[6], NULL},
{ &dib_table[5], NULL },
},
{ "Unkown USB1.1 DVB-T device ???? please report the name to the author",
&dibusb_device_classes[DIBUSB1_1],
{ &dib_table[17], NULL },
{ &dib_table[18], NULL },
},
{ "DiBcom USB2.0 DVB-T reference design (MOD3000P)",
&dibusb_device_classes[DIBUSB2_0],
{ &dib_table[9], NULL },
{ &dib_table[10], NULL },
},
{ "Artec T1 USB2.0 TVBOX (please report the warm ID)",
&dibusb_device_classes[DIBUSB2_0],
{ &dib_table[27], NULL },
{ NULL },
},
{ "Hauppauge WinTV NOVA-T USB2",
&dibusb_device_classes[NOVAT_USB2],
{ &dib_table[30], NULL },
{ &dib_table[31], NULL },
},
{ "DTT200U (Yakumo/Hama/Typhoon) DVB-T USB2.0",
&dibusb_device_classes[DTT200U],
{ &dib_table[2], NULL },
{ &dib_table[3], NULL },
},
{ "Hanftek UMT-010 DVB-T USB2.0",
&dibusb_device_classes[UMT2_0],
{ &dib_table[28], NULL },
{ &dib_table[29], NULL },
},
{ "KWorld/ADSTech Instant DVB-T USB 2.0",
&dibusb_device_classes[DIBUSB2_0B],
{ &dib_table[32], NULL },
{ &dib_table[33], NULL }, /* device ID with default DIBUSB2_0-firmware */
},
#ifdef CONFIG_DVB_DIBUSB_MISDESIGNED_DEVICES
{ "Artec T1 USB1.1 TVBOX with AN2235 (misdesigned)",
&dibusb_device_classes[DIBUSB1_1_AN2235],
{ &dib_table[34], NULL },
{ NULL },
},
{ "Artec T1 USB2.0 TVBOX with FX2 IDs (misdesigned, please report the warm ID)",
&dibusb_device_classes[DTT200U],
{ &dib_table[35], NULL },
{ &dib_table[36], NULL }, /* undefined, it could be that the device will get another USB ID in warm state */
},
{ "DiBcom USB1.1 DVB-T reference design (MOD3000) with AN2135 default IDs",
&dibusb_device_classes[DIBUSB1_1],
{ &dib_table[37], NULL },
{ NULL },
},
#endif
};
static int dibusb_exit(struct usb_dibusb *dib)
{
deb_info("init_state before exiting everything: %x\n",dib->init_state);
dibusb_remote_exit(dib);
dibusb_fe_exit(dib);
dibusb_i2c_exit(dib);
dibusb_dvb_exit(dib);
dibusb_urb_exit(dib);
deb_info("init_state should be zero now: %x\n",dib->init_state);
dib->init_state = DIBUSB_STATE_INIT;
kfree(dib);
return 0;
}
static int dibusb_init(struct usb_dibusb *dib)
{
int ret = 0;
sema_init(&dib->usb_sem, 1);
sema_init(&dib->i2c_sem, 1);
dib->init_state = DIBUSB_STATE_INIT;
if ((ret = dibusb_urb_init(dib)) ||
(ret = dibusb_dvb_init(dib)) ||
(ret = dibusb_i2c_init(dib))) {
dibusb_exit(dib);
return ret;
}
if ((ret = dibusb_fe_init(dib)))
err("could not initialize a frontend.");
if ((ret = dibusb_remote_init(dib)))
err("could not initialize remote control.");
return 0;
}
static struct dibusb_usb_device * dibusb_device_class_quirk(struct usb_device *udev, struct dibusb_usb_device *dev)
{
int i;
/* Quirk for the Kworld/ADSTech Instant USB2.0 device. It has the same USB
* IDs like the USB1.1 KWorld after loading the firmware. Which is a bad
* idea and make this quirk necessary.
*/
if (dev->dev_cl->id == DIBUSB1_1 && udev->speed == USB_SPEED_HIGH) {
info("this seems to be the Kworld/ADSTech Instant USB2.0 device or equal.");
for (i = 0; i < sizeof(dibusb_devices)/sizeof(struct dibusb_usb_device); i++) {
if (dibusb_devices[i].dev_cl->id == DIBUSB2_0B) {
dev = &dibusb_devices[i];
break;
}
}
}
return dev;
}
static struct dibusb_usb_device * dibusb_find_device (struct usb_device *udev,int *cold)
{
int i,j;
struct dibusb_usb_device *dev = NULL;
*cold = -1;
for (i = 0; i < sizeof(dibusb_devices)/sizeof(struct dibusb_usb_device); i++) {
for (j = 0; j < DIBUSB_ID_MAX_NUM && dibusb_devices[i].cold_ids[j] != NULL; j++) {
deb_info("check for cold %x %x\n",dibusb_devices[i].cold_ids[j]->idVendor, dibusb_devices[i].cold_ids[j]->idProduct);
if (dibusb_devices[i].cold_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) &&
dibusb_devices[i].cold_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) {
*cold = 1;
dev = &dibusb_devices[i];
break;
}
}
if (dev != NULL)
break;
for (j = 0; j < DIBUSB_ID_MAX_NUM && dibusb_devices[i].warm_ids[j] != NULL; j++) {
deb_info("check for warm %x %x\n",dibusb_devices[i].warm_ids[j]->idVendor, dibusb_devices[i].warm_ids[j]->idProduct);
if (dibusb_devices[i].warm_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) &&
dibusb_devices[i].warm_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) {
*cold = 0;
dev = &dibusb_devices[i];
break;
}
}
}
if (dev != NULL)
dev = dibusb_device_class_quirk(udev,dev);
return dev;
}
/*
* USB
*/
static int dibusb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(intf);
struct usb_dibusb *dib = NULL;
struct dibusb_usb_device *dibdev = NULL;
int ret = -ENOMEM,cold=0;
if ((dibdev = dibusb_find_device(udev,&cold)) == NULL) {
err("something went very wrong, "
"unknown product ID: %.4x",le16_to_cpu(udev->descriptor.idProduct));
return -ENODEV;
}
if (cold == 1) {
info("found a '%s' in cold state, will try to load a firmware",dibdev->name);
ret = dibusb_loadfirmware(udev,dibdev);
} else {
info("found a '%s' in warm state.",dibdev->name);
dib = kmalloc(sizeof(struct usb_dibusb),GFP_KERNEL);
if (dib == NULL) {
err("no memory");
return ret;
}
memset(dib,0,sizeof(struct usb_dibusb));
dib->udev = udev;
dib->dibdev = dibdev;
/* store parameters to structures */
dib->rc_query_interval = rc_query_interval;
dib->pid_parse = pid_parse;
dib->rc_key_repeat_count = rc_key_repeat_count;
usb_set_intfdata(intf, dib);
ret = dibusb_init(dib);
}
if (ret == 0)
info("%s successfully initialized and connected.",dibdev->name);
else
info("%s error while loading driver (%d)",dibdev->name,ret);
return ret;
}
static void dibusb_disconnect(struct usb_interface *intf)
{
struct usb_dibusb *dib = usb_get_intfdata(intf);
const char *name = DRIVER_DESC;
usb_set_intfdata(intf,NULL);
if (dib != NULL && dib->dibdev != NULL) {
name = dib->dibdev->name;
dibusb_exit(dib);
}
info("%s successfully deinitialized and disconnected.",name);
}
/* usb specific object needed to register this driver with the usb subsystem */
static struct usb_driver dibusb_driver = {
.owner = THIS_MODULE,
.name = DRIVER_DESC,
.probe = dibusb_probe,
.disconnect = dibusb_disconnect,
.id_table = dib_table,
};
/* module stuff */
static int __init usb_dibusb_init(void)
{
int result;
if ((result = usb_register(&dibusb_driver))) {
err("usb_register failed. Error number %d",result);
return result;
}
return 0;
}
static void __exit usb_dibusb_exit(void)
{
/* deregister this driver from the USB subsystem */
usb_deregister(&dibusb_driver);
}
module_init (usb_dibusb_init);
module_exit (usb_dibusb_exit);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
drivers/media/dvb/dibusb/dvb-dibusb-dvb.c deleted 100644 → 0
View file @ 3e05d2b8
/*
* dvb-dibusb-dvb.c is part of the driver for mobile USB Budget DVB-T devices
* based on reference design made by DiBcom (http://www.dibcom.fr/)
*
* Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
*
* see dvb-dibusb-core.c for more copyright details.
*
* This file contains functions for initializing and handling the
* linux-dvb API.
*/
#include "dvb-dibusb.h"
#include <linux/usb.h>
#include <linux/version.h>
static u32 urb_compl_count;
/*
* MPEG2 TS DVB stuff
*/
void dibusb_urb_complete(struct urb *urb, struct pt_regs *ptregs)
{
struct usb_dibusb *dib = urb->context;
deb_ts("urb complete feedcount: %d, status: %d, length: %d\n",dib->feedcount,urb->status,
urb->actual_length);
urb_compl_count++;
if (urb_compl_count % 1000 == 0)
deb_info("%d urbs completed so far.\n",urb_compl_count);
switch (urb->status) {
case 0: /* success */
case -ETIMEDOUT: /* NAK */
break;
case -ECONNRESET: /* kill */
case -ENOENT:
case -ESHUTDOWN:
return;
default: /* error */
deb_ts("urb completition error %d.", urb->status);
break;
}
if (dib->feedcount > 0 && urb->actual_length > 0) {
if (dib->init_state & DIBUSB_STATE_DVB)
dvb_dmx_swfilter(&dib->demux, (u8*) urb->transfer_buffer,urb->actual_length);
} else
deb_ts("URB dropped because of feedcount.\n");
usb_submit_urb(urb,GFP_ATOMIC);
}
static int dibusb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed, int onoff)
{
struct usb_dibusb *dib = dvbdmxfeed->demux->priv;
int newfeedcount;
if (dib == NULL)
return -ENODEV;
newfeedcount = dib->feedcount + (onoff ? 1 : -1);
/*
* stop feed before setting a new pid if there will be no pid anymore
*/
if (newfeedcount == 0) {
deb_ts("stop feeding\n");
if (dib->xfer_ops.fifo_ctrl != NULL) {
if (dib->xfer_ops.fifo_ctrl(dib->fe,0)) {
err("error while inhibiting fifo.");
return -ENODEV;
}
}
dibusb_streaming(dib,0);
}
dib->feedcount = newfeedcount;
/* activate the pid on the device specific pid_filter */
deb_ts("setting pid: %5d %04x at index %d '%s'\n",dvbdmxfeed->pid,dvbdmxfeed->pid,dvbdmxfeed->index,onoff ? "on" : "off");
if (dib->pid_parse && dib->xfer_ops.pid_ctrl != NULL)
dib->xfer_ops.pid_ctrl(dib->fe,dvbdmxfeed->index,dvbdmxfeed->pid,onoff);
/*
* start the feed if this was the first pid to set and there is still a pid
* for reception.
*/
if (dib->feedcount == onoff && dib->feedcount > 0) {
deb_ts("controlling pid parser\n");
if (dib->xfer_ops.pid_parse != NULL) {
if (dib->xfer_ops.pid_parse(dib->fe,dib->pid_parse) < 0) {
err("could not handle pid_parser");
}
}
deb_ts("start feeding\n");
if (dib->xfer_ops.fifo_ctrl != NULL) {
if (dib->xfer_ops.fifo_ctrl(dib->fe,1)) {
err("error while enabling fifo.");
return -ENODEV;
}
}
dibusb_streaming(dib,1);
}
return 0;
}
static int dibusb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
{
deb_ts("start pid: 0x%04x, feedtype: %d\n", dvbdmxfeed->pid,dvbdmxfeed->type);
return dibusb_ctrl_feed(dvbdmxfeed,1);
}
static int dibusb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
{
deb_ts("stop pid: 0x%04x, feedtype: %d\n", dvbdmxfeed->pid, dvbdmxfeed->type);
return dibusb_ctrl_feed(dvbdmxfeed,0);
}
int dibusb_dvb_init(struct usb_dibusb *dib)
{
int ret;
urb_compl_count = 0;
if ((ret = dvb_register_adapter(&dib->adapter, DRIVER_DESC,
THIS_MODULE)) < 0) {
deb_info("dvb_register_adapter failed: error %d", ret);
goto err;
}
dib->adapter.priv = dib;
/* i2c is done in dibusb_i2c_init */
dib->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING;
dib->demux.priv = (void *)dib;
/* get pidcount from demod */
dib->demux.feednum = dib->demux.filternum = 255;
dib->demux.start_feed = dibusb_start_feed;
dib->demux.stop_feed = dibusb_stop_feed;
dib->demux.write_to_decoder = NULL;
if ((ret = dvb_dmx_init(&dib->demux)) < 0) {
err("dvb_dmx_init failed: error %d",ret);
goto err_dmx;
}
dib->dmxdev.filternum = dib->demux.filternum;
dib->dmxdev.demux = &dib->demux.dmx;
dib->dmxdev.capabilities = 0;
if ((ret = dvb_dmxdev_init(&dib->dmxdev, &dib->adapter)) < 0) {
err("dvb_dmxdev_init failed: error %d",ret);
goto err_dmx_dev;
}
dvb_net_init(&dib->adapter, &dib->dvb_net, &dib->demux.dmx);
goto success;
err_dmx_dev:
dvb_dmx_release(&dib->demux);
err_dmx:
dvb_unregister_adapter(&dib->adapter);
err:
return ret;
success:
dib->init_state |= DIBUSB_STATE_DVB;
return 0;
}
int dibusb_dvb_exit(struct usb_dibusb *dib)
{
if (dib->init_state & DIBUSB_STATE_DVB) {
dib->init_state &= ~DIBUSB_STATE_DVB;
deb_info("unregistering DVB part\n");
dvb_net_release(&dib->dvb_net);
dib->demux.dmx.close(&dib->demux.dmx);
dvb_dmxdev_release(&dib->dmxdev);
dvb_dmx_release(&dib->demux);
dvb_unregister_adapter(&dib->adapter);
}
return 0;
}
drivers/media/dvb/dibusb/dvb-dibusb-fe-i2c.c deleted 100644 → 0
View file @ 3e05d2b8
/*
* dvb-dibusb-fe-i2c.c is part of the driver for mobile USB Budget DVB-T devices
* based on reference design made by DiBcom (http://www.dibcom.fr/)
*
* Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
*
* see dvb-dibusb-core.c for more copyright details.
*
* This file contains functions for attaching, initializing of an appropriate
* demodulator/frontend. I2C-stuff is also located here.
*
*/
#include "dvb-dibusb.h"
#include <linux/usb.h>
static int dibusb_i2c_msg(struct usb_dibusb *dib, u8 addr,
u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
{
u8 sndbuf[wlen+4]; /* lead(1) devaddr,direction(1) addr(2) data(wlen) (len(2) (when reading)) */
/* write only ? */
int wo = (rbuf == NULL || rlen == 0),
len = 2 + wlen + (wo ? 0 : 2);
sndbuf[0] = wo ? DIBUSB_REQ_I2C_WRITE : DIBUSB_REQ_I2C_READ;
sndbuf[1] = (addr << 1) | (wo ? 0 : 1);
memcpy(&sndbuf[2],wbuf,wlen);
if (!wo) {
sndbuf[wlen+2] = (rlen >> 8) & 0xff;
sndbuf[wlen+3] = rlen & 0xff;
}
return dibusb_readwrite_usb(dib,sndbuf,len,rbuf,rlen);
}
/*
* I2C master xfer function
*/
static int dibusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg *msg,int num)
{
struct usb_dibusb *dib = i2c_get_adapdata(adap);
int i;
if (down_interruptible(&dib->i2c_sem) < 0)
return -EAGAIN;
if (num > 2)
warn("more than 2 i2c messages at a time is not handled yet. TODO.");
for (i = 0; i < num; i++) {
/* write/read request */
if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
if (dibusb_i2c_msg(dib, msg[i].addr, msg[i].buf,msg[i].len,
msg[i+1].buf,msg[i+1].len) < 0)
break;
i++;
} else
if (dibusb_i2c_msg(dib, msg[i].addr, msg[i].buf,msg[i].len,NULL,0) < 0)
break;
}
up(&dib->i2c_sem);
return i;
}
static u32 dibusb_i2c_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_I2C;
}
static struct i2c_algorithm dibusb_algo = {
.name = "DiBcom USB i2c algorithm",
.id = I2C_ALGO_BIT,
.master_xfer = dibusb_i2c_xfer,
.functionality = dibusb_i2c_func,
};
static int dibusb_general_demod_init(struct dvb_frontend *fe);
static u8 dibusb_general_pll_addr(struct dvb_frontend *fe);
static int dibusb_general_pll_init(struct dvb_frontend *fe, u8 pll_buf[5]);
static int dibusb_general_pll_set(struct dvb_frontend *fe,
struct dvb_frontend_parameters* params, u8 pll_buf[5]);
static struct mt352_config mt352_hanftek_umt_010_config = {
.demod_address = 0x1e,
.demod_init = dibusb_general_demod_init,
.pll_set = dibusb_general_pll_set,
};
static int dibusb_tuner_quirk(struct usb_dibusb *dib)
{
switch (dib->dibdev->dev_cl->id) {
case DIBUSB1_1: /* some these device have the ENV77H11D5 and some the THOMSON CABLE */
case DIBUSB1_1_AN2235: { /* actually its this device, but in warm state they are indistinguishable */
struct dibusb_tuner *t;
u8 b[2] = { 0,0 } ,b2[1];
struct i2c_msg msg[2] = {
{ .flags = 0, .buf = b, .len = 2 },
{ .flags = I2C_M_RD, .buf = b2, .len = 1},
};
t = &dibusb_tuner[DIBUSB_TUNER_COFDM_PANASONIC_ENV77H11D5];
msg[0].addr = msg[1].addr = t->pll_addr;
if (dib->xfer_ops.tuner_pass_ctrl != NULL)
dib->xfer_ops.tuner_pass_ctrl(dib->fe,1,t->pll_addr);
dibusb_i2c_xfer(&dib->i2c_adap,msg,2);
if (dib->xfer_ops.tuner_pass_ctrl != NULL)
dib->xfer_ops.tuner_pass_ctrl(dib->fe,0,t->pll_addr);
if (b2[0] == 0xfe)
info("this device has the Thomson Cable onboard. Which is default.");
else {
dib->tuner = t;
info("this device has the Panasonic ENV77H11D5 onboard.");
}
break;
}
default:
break;
}
return 0;
}
int dibusb_fe_init(struct usb_dibusb* dib)
{
struct dib3000_config demod_cfg;
int i;
if (dib->init_state & DIBUSB_STATE_I2C) {
for (i = 0; i < sizeof(dib->dibdev->dev_cl->demod->i2c_addrs) / sizeof(unsigned char) &&
dib->dibdev->dev_cl->demod->i2c_addrs[i] != 0; i++) {
demod_cfg.demod_address = dib->dibdev->dev_cl->demod->i2c_addrs[i];
demod_cfg.pll_addr = dibusb_general_pll_addr;
demod_cfg.pll_set = dibusb_general_pll_set;
demod_cfg.pll_init = dibusb_general_pll_init;
deb_info("demod id: %d %d\n",dib->dibdev->dev_cl->demod->id,DTT200U_FE);
switch (dib->dibdev->dev_cl->demod->id) {
case DIBUSB_DIB3000MB:
dib->fe = dib3000mb_attach(&demod_cfg,&dib->i2c_adap,&dib->xfer_ops);
break;
case DIBUSB_DIB3000MC:
dib->fe = dib3000mc_attach(&demod_cfg,&dib->i2c_adap,&dib->xfer_ops);
break;
case DIBUSB_MT352:
mt352_hanftek_umt_010_config.demod_address = dib->dibdev->dev_cl->demod->i2c_addrs[i];
dib->fe = mt352_attach(&mt352_hanftek_umt_010_config, &dib->i2c_adap);
break;
case DTT200U_FE:
dib->fe = dtt200u_fe_attach(dib,&dib->xfer_ops);
break;
}
if (dib->fe != NULL) {
info("found demodulator at i2c address 0x%x",dib->dibdev->dev_cl->demod->i2c_addrs[i]);
break;
}
}
/* if a frontend was found */
if (dib->fe != NULL) {
if (dib->fe->ops->sleep != NULL)
dib->fe_sleep = dib->fe->ops->sleep;
dib->fe->ops->sleep = dibusb_hw_sleep;
if (dib->fe->ops->init != NULL )
dib->fe_init = dib->fe->ops->init;
dib->fe->ops->init = dibusb_hw_wakeup;
/* setting the default tuner */
dib->tuner = dib->dibdev->dev_cl->tuner;
/* check which tuner is mounted on this device, in case this is unsure */
dibusb_tuner_quirk(dib);
}
}
if (dib->fe == NULL) {
err("A frontend driver was not found for device '%s'.",
dib->dibdev->name);
return -ENODEV;
} else {
if (dvb_register_frontend(&dib->adapter, dib->fe)) {
err("Frontend registration failed.");
if (dib->fe->ops->release)
dib->fe->ops->release(dib->fe);
dib->fe = NULL;
return -ENODEV;
}
}
return 0;
}
int dibusb_fe_exit(struct usb_dibusb *dib)
{
if (dib->fe != NULL)
dvb_unregister_frontend(dib->fe);
return 0;
}
int dibusb_i2c_init(struct usb_dibusb *dib)
{
int ret = 0;
dib->adapter.priv = dib;
strncpy(dib->i2c_adap.name,dib->dibdev->name,I2C_NAME_SIZE);
#ifdef I2C_ADAP_CLASS_TV_DIGITAL
dib->i2c_adap.class = I2C_ADAP_CLASS_TV_DIGITAL,
#else
dib->i2c_adap.class = I2C_CLASS_TV_DIGITAL,
#endif
dib->i2c_adap.algo = &dibusb_algo;
dib->i2c_adap.algo_data = NULL;
dib->i2c_adap.id = I2C_ALGO_BIT;
i2c_set_adapdata(&dib->i2c_adap, dib);
if ((ret = i2c_add_adapter(&dib->i2c_adap)) < 0)
err("could not add i2c adapter");
dib->init_state |= DIBUSB_STATE_I2C;
return ret;
}
int dibusb_i2c_exit(struct usb_dibusb *dib)
{
if (dib->init_state & DIBUSB_STATE_I2C)
i2c_del_adapter(&dib->i2c_adap);
dib->init_state &= ~DIBUSB_STATE_I2C;
return 0;
}
/* pll stuff, maybe removed soon (thx to Gerd/Andrew in advance) */
static int thomson_cable_eu_pll_set(struct dvb_frontend_parameters *fep, u8 pllbuf[4])
{
u32 tfreq = (fep->frequency + 36125000) / 62500;
int vu,p0,p1,p2;
if (fep->frequency > 403250000)
vu = 1, p2 = 1, p1 = 0, p0 = 1;
else if (fep->frequency > 115750000)
vu = 0, p2 = 1, p1 = 1, p0 = 0;
else if (fep->frequency > 44250000)
vu = 0, p2 = 0, p1 = 1, p0 = 1;
else
return -EINVAL;
pllbuf[0] = (tfreq >> 8) & 0x7f;
pllbuf[1] = tfreq & 0xff;
pllbuf[2] = 0x8e;
pllbuf[3] = (vu << 7) | (p2 << 2) | (p1 << 1) | p0;
return 0;
}
static int panasonic_cofdm_env57h1xd5_pll_set(struct dvb_frontend_parameters *fep, u8 pllbuf[4])
{
u32 freq_khz = fep->frequency / 1000;
u32 tfreq = ((freq_khz + 36125)*6 + 500) / 1000;
u8 TA, T210, R210, ctrl1, cp210, p4321;
if (freq_khz > 858000) {
err("frequency cannot be larger than 858 MHz.");
return -EINVAL;
}
// contol data 1 : 1 | T/A=1 | T2,T1,T0 = 0,0,0 | R2,R1,R0 = 0,1,0
TA = 1;
T210 = 0;
R210 = 0x2;
ctrl1 = (1 << 7) | (TA << 6) | (T210 << 3) | R210;
// ******** CHARGE PUMP CONFIG vs RF FREQUENCIES *****************
if (freq_khz < 470000)
cp210 = 2; // VHF Low and High band ch E12 to E4 to E12
else if (freq_khz < 526000)
cp210 = 4; // UHF band Ch E21 to E27
else // if (freq < 862000000)
cp210 = 5; // UHF band ch E28 to E69
//********************* BW select *******************************
if (freq_khz < 153000)
p4321 = 1; // BW selected for VHF low
else if (freq_khz < 470000)
p4321 = 2; // BW selected for VHF high E5 to E12
else // if (freq < 862000000)
p4321 = 4; // BW selection for UHF E21 to E69
pllbuf[0] = (tfreq >> 8) & 0xff;
pllbuf[1] = (tfreq >> 0) & 0xff;
pllbuf[2] = 0xff & ctrl1;
pllbuf[3] = (cp210 << 5) | (p4321);
return 0;
}
/*
* 7 6 5 4 3 2 1 0
* Address Byte 1 1 0 0 0 MA1 MA0 R/~W=0
*
* Program divider byte 1 0 n14 n13 n12 n11 n10 n9 n8
* Program divider byte 2 n7 n6 n5 n4 n3 n2 n1 n0
*
* Control byte 1 1 T/A=1 T2 T1 T0 R2 R1 R0
* 1 T/A=0 0 0 ATC AL2 AL1 AL0
*
* Control byte 2 CP2 CP1 CP0 BS5 BS4 BS3 BS2 BS1
*
* MA0/1 = programmable address bits
* R/~W = read/write bit (0 for writing)
* N14-0 = programmable LO frequency
*
* T/A = test AGC bit (0 = next 6 bits AGC setting,
* 1 = next 6 bits test and reference divider ratio settings)
* T2-0 = test bits
* R2-0 = reference divider ratio and programmable frequency step
* ATC = AGC current setting and time constant
* ATC = 0: AGC current = 220nA, AGC time constant = 2s
* ATC = 1: AGC current = 9uA, AGC time constant = 50ms
* AL2-0 = AGC take-over point bits
* CP2-0 = charge pump current
* BS5-1 = PMOS ports control bits;
* BSn = 0 corresponding port is off, high-impedance state (at power-on)
* BSn = 1 corresponding port is on
*/
static int panasonic_cofdm_env77h11d5_tda6650_init(struct dvb_frontend *fe, u8 pllbuf[4])
{
pllbuf[0] = 0x0b;
pllbuf[1] = 0xf5;
pllbuf[2] = 0x85;
pllbuf[3] = 0xab;
return 0;
}
static int panasonic_cofdm_env77h11d5_tda6650_set (struct dvb_frontend_parameters *fep,u8 pllbuf[4])
{
int tuner_frequency = 0;
u8 band, cp, filter;
// determine charge pump
tuner_frequency = fep->frequency + 36166000;
if (tuner_frequency < 87000000)
return -EINVAL;
else if (tuner_frequency < 130000000)
cp = 3;
else if (tuner_frequency < 160000000)
cp = 5;
else if (tuner_frequency < 200000000)
cp = 6;
else if (tuner_frequency < 290000000)
cp = 3;
else if (tuner_frequency < 420000000)
cp = 5;
else if (tuner_frequency < 480000000)
cp = 6;
else if (tuner_frequency < 620000000)
cp = 3;
else if (tuner_frequency < 830000000)
cp = 5;
else if (tuner_frequency < 895000000)
cp = 7;
else
return -EINVAL;
// determine band
if (fep->frequency < 49000000)
return -EINVAL;
else if (fep->frequency < 161000000)
band = 1;
else if (fep->frequency < 444000000)
band = 2;
else if (fep->frequency < 861000000)
band = 4;
else
return -EINVAL;
// setup PLL filter
switch (fep->u.ofdm.bandwidth) {
case BANDWIDTH_6_MHZ:
case BANDWIDTH_7_MHZ:
filter = 0;
break;
case BANDWIDTH_8_MHZ:
filter = 1;
break;
default:
return -EINVAL;
}
// calculate divisor
// ((36166000+((1000000/6)/2)) + Finput)/(1000000/6)
tuner_frequency = (((fep->frequency / 1000) * 6) + 217496) / 1000;
// setup tuner buffer
pllbuf[0] = (tuner_frequency >> 8) & 0x7f;
pllbuf[1] = tuner_frequency & 0xff;
pllbuf[2] = 0xca;
pllbuf[3] = (cp << 5) | (filter << 3) | band;
return 0;
}
/*
* 7 6 5 4 3 2 1 0
* Address Byte 1 1 0 0 0 MA1 MA0 R/~W=0
*
* Program divider byte 1 0 n14 n13 n12 n11 n10 n9 n8
* Program divider byte 2 n7 n6 n5 n4 n3 n2 n1 n0
*
* Control byte 1 CP T2 T1 T0 RSA RSB OS
*
* Band Switch byte X X X P4 P3 P2 P1 P0
*
* Auxiliary byte ATC AL2 AL1 AL0 0 0 0 0
*
* Address: MA1 MA0 Address
* 0 0 c0
* 0 1 c2 (always valid)
* 1 0 c4
* 1 1 c6
*/
static int lg_tdtp_e102p_tua6034(struct dvb_frontend_parameters* fep, u8 pllbuf[4])
{
u32 div;
u8 p210, p3;
#define TUNER_MUL 62500
div = (fep->frequency + 36125000 + TUNER_MUL / 2) / TUNER_MUL;
// div = ((fep->frequency/1000 + 36166) * 6) / 1000;
if (fep->frequency < 174500000)
p210 = 1; // not supported by the tdtp_e102p
else if (fep->frequency < 230000000) // VHF
p210 = 2;
else
p210 = 4;
if (fep->u.ofdm.bandwidth == BANDWIDTH_7_MHZ)
p3 = 0;
else
p3 = 1;
pllbuf[0] = (div >> 8) & 0x7f;
pllbuf[1] = div & 0xff;
pllbuf[2] = 0xce;
// pllbuf[2] = 0xcc;
pllbuf[3] = (p3 << 3) | p210;
return 0;
}
static int lg_tdtp_e102p_mt352_demod_init(struct dvb_frontend *fe)
{
static u8 mt352_clock_config[] = { 0x89, 0xb8, 0x2d };
static u8 mt352_reset[] = { 0x50, 0x80 };
static u8 mt352_mclk_ratio[] = { 0x8b, 0x00 };
static u8 mt352_adc_ctl_1_cfg[] = { 0x8E, 0x40 };
static u8 mt352_agc_cfg[] = { 0x67, 0x10, 0xa0 };
static u8 mt352_sec_agc_cfg1[] = { 0x6a, 0xff };
static u8 mt352_sec_agc_cfg2[] = { 0x6d, 0xff };
static u8 mt352_sec_agc_cfg3[] = { 0x70, 0x40 };
static u8 mt352_sec_agc_cfg4[] = { 0x7b, 0x03 };
static u8 mt352_sec_agc_cfg5[] = { 0x7d, 0x0f };
static u8 mt352_acq_ctl[] = { 0x53, 0x50 };
static u8 mt352_input_freq_1[] = { 0x56, 0x31, 0x06 };
mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
udelay(2000);
mt352_write(fe, mt352_reset, sizeof(mt352_reset));
mt352_write(fe, mt352_mclk_ratio, sizeof(mt352_mclk_ratio));
mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
mt352_write(fe, mt352_sec_agc_cfg1, sizeof(mt352_sec_agc_cfg1));
mt352_write(fe, mt352_sec_agc_cfg2, sizeof(mt352_sec_agc_cfg2));
mt352_write(fe, mt352_sec_agc_cfg3, sizeof(mt352_sec_agc_cfg3));
mt352_write(fe, mt352_sec_agc_cfg4, sizeof(mt352_sec_agc_cfg4));
mt352_write(fe, mt352_sec_agc_cfg5, sizeof(mt352_sec_agc_cfg5));
mt352_write(fe, mt352_acq_ctl, sizeof(mt352_acq_ctl));
mt352_write(fe, mt352_input_freq_1, sizeof(mt352_input_freq_1));
return 0;
}
static int dibusb_general_demod_init(struct dvb_frontend *fe)
{
struct usb_dibusb* dib = (struct usb_dibusb*) fe->dvb->priv;
switch (dib->dibdev->dev_cl->id) {
case UMT2_0:
return lg_tdtp_e102p_mt352_demod_init(fe);
default: /* other device classes do not have device specific demod inits */
break;
}
return 0;
}
static u8 dibusb_general_pll_addr(struct dvb_frontend *fe)
{
struct usb_dibusb* dib = (struct usb_dibusb*) fe->dvb->priv;
return dib->tuner->pll_addr;
}
static int dibusb_pll_i2c_helper(struct usb_dibusb *dib, u8 pll_buf[5], u8 buf[4])
{
if (pll_buf == NULL) {
struct i2c_msg msg = {
.addr = dib->tuner->pll_addr,
.flags = 0,
.buf = buf,
.len = sizeof(buf)
};
if (i2c_transfer (&dib->i2c_adap, &msg, 1) != 1)
return -EIO;
msleep(1);
} else {
pll_buf[0] = dib->tuner->pll_addr << 1;
memcpy(&pll_buf[1],buf,4);
}
return 0;
}
static int dibusb_general_pll_init(struct dvb_frontend *fe,
u8 pll_buf[5])
{
struct usb_dibusb* dib = (struct usb_dibusb*) fe->dvb->priv;
u8 buf[4];
int ret=0;
switch (dib->tuner->id) {
case DIBUSB_TUNER_COFDM_PANASONIC_ENV77H11D5:
ret = panasonic_cofdm_env77h11d5_tda6650_init(fe,buf);
break;
default:
break;
}
if (ret)
return ret;
return dibusb_pll_i2c_helper(dib,pll_buf,buf);
}
static int dibusb_general_pll_set(struct dvb_frontend *fe,
struct dvb_frontend_parameters *fep, u8 pll_buf[5])
{
struct usb_dibusb* dib = (struct usb_dibusb*) fe->dvb->priv;
u8 buf[4];
int ret=0;
switch (dib->tuner->id) {
case DIBUSB_TUNER_CABLE_THOMSON:
ret = thomson_cable_eu_pll_set(fep, buf);
break;
case DIBUSB_TUNER_COFDM_PANASONIC_ENV57H1XD5:
ret = panasonic_cofdm_env57h1xd5_pll_set(fep, buf);
break;
case DIBUSB_TUNER_CABLE_LG_TDTP_E102P:
ret = lg_tdtp_e102p_tua6034(fep, buf);
break;
case DIBUSB_TUNER_COFDM_PANASONIC_ENV77H11D5:
ret = panasonic_cofdm_env77h11d5_tda6650_set(fep,buf);
break;
default:
warn("no pll programming routine found for tuner %d.\n",dib->tuner->id);
ret = -ENODEV;
break;
}
if (ret)
return ret;
return dibusb_pll_i2c_helper(dib,pll_buf,buf);
}
drivers/media/dvb/dibusb/dvb-dibusb-firmware.c deleted 100644 → 0
View file @ 3e05d2b8
/*
* dvb-dibusb-firmware.c is part of the driver for mobile USB Budget DVB-T devices
* based on reference design made by DiBcom (http://www.dibcom.fr/)
*
* Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
*
* see dvb-dibusb-core.c for more copyright details.
*
* This file contains functions for downloading the firmware to the device.
*/
#include "dvb-dibusb.h"
#include <linux/firmware.h>
#include <linux/usb.h>
/*
* load a firmware packet to the device
*/
static int dibusb_writemem(struct usb_device *udev,u16 addr,u8 *data, u8 len)
{
return usb_control_msg(udev, usb_sndctrlpipe(udev,0),
0xa0, USB_TYPE_VENDOR, addr, 0x00, data, len, 5000);
}
int dibusb_loadfirmware(struct usb_device *udev, struct dibusb_usb_device *dibdev)
{
const struct firmware *fw = NULL;
u16 addr;
u8 *b,*p;
int ret = 0,i;
if ((ret = request_firmware(&fw, dibdev->dev_cl->firmware, &udev->dev)) != 0) {
err("did not find the firmware file. (%s) "
"Please see linux/Documentation/dvb/ for more details on firmware-problems.",
dibdev->dev_cl->firmware);
return ret;
}
info("downloading firmware from file '%s'.",dibdev->dev_cl->firmware);
p = kmalloc(fw->size,GFP_KERNEL);
if (p != NULL) {
u8 reset;
/*
* you cannot use the fw->data as buffer for
* usb_control_msg, a new buffer has to be
* created
*/
memcpy(p,fw->data,fw->size);
/* stop the CPU */
reset = 1;
if ((ret = dibusb_writemem(udev,dibdev->dev_cl->usb_ctrl->cpu_cs_register,&reset,1)) != 1)
err("could not stop the USB controller CPU.");
for(i = 0; p[i+3] == 0 && i < fw->size; ) {
b = (u8 *) &p[i];
addr = *((u16 *) &b[1]);
ret = dibusb_writemem(udev,addr,&b[4],b[0]);
if (ret != b[0]) {
err("error while transferring firmware "
"(transferred size: %d, block size: %d)",
ret,b[0]);
ret = -EINVAL;
break;
}
i += 5 + b[0];
}
/* length in ret */
if (ret > 0)
ret = 0;
/* restart the CPU */
reset = 0;
if (ret || dibusb_writemem(udev,dibdev->dev_cl->usb_ctrl->cpu_cs_register,&reset,1) != 1) {
err("could not restart the USB controller CPU.");
ret = -EINVAL;
}
kfree(p);
} else {
ret = -ENOMEM;
}
release_firmware(fw);
return ret;
}
drivers/media/dvb/dibusb/dvb-dibusb-remote.c deleted 100644 → 0
View file @ 3e05d2b8
/*
* dvb-dibusb-remote.c is part of the driver for mobile USB Budget DVB-T devices
* based on reference design made by DiBcom (http://www.dibcom.fr/)
*
* Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
*
* see dvb-dibusb-core.c for more copyright details.
*
* This file contains functions for handling the event device on the software
* side and the remote control on the hardware side.
*/
#include "dvb-dibusb.h"
/* Table to map raw key codes to key events. This should not be hard-wired
into the kernel. */
static const struct { u8 c0, c1, c2; uint32_t key; } nec_rc_keys [] =
{
/* Key codes for the little Artec T1/Twinhan/HAMA/ remote. */
{ 0x00, 0xff, 0x16, KEY_POWER },
{ 0x00, 0xff, 0x10, KEY_MUTE },
{ 0x00, 0xff, 0x03, KEY_1 },
{ 0x00, 0xff, 0x01, KEY_2 },
{ 0x00, 0xff, 0x06, KEY_3 },
{ 0x00, 0xff, 0x09, KEY_4 },
{ 0x00, 0xff, 0x1d, KEY_5 },
{ 0x00, 0xff, 0x1f, KEY_6 },
{ 0x00, 0xff, 0x0d, KEY_7 },
{ 0x00, 0xff, 0x19, KEY_8 },
{ 0x00, 0xff, 0x1b, KEY_9 },
{ 0x00, 0xff, 0x15, KEY_0 },
{ 0x00, 0xff, 0x05, KEY_CHANNELUP },
{ 0x00, 0xff, 0x02, KEY_CHANNELDOWN },
{ 0x00, 0xff, 0x1e, KEY_VOLUMEUP },
{ 0x00, 0xff, 0x0a, KEY_VOLUMEDOWN },
{ 0x00, 0xff, 0x11, KEY_RECORD },
{ 0x00, 0xff, 0x17, KEY_FAVORITES }, /* Heart symbol - Channel list. */
{ 0x00, 0xff, 0x14, KEY_PLAY },
{ 0x00, 0xff, 0x1a, KEY_STOP },
{ 0x00, 0xff, 0x40, KEY_REWIND },
{ 0x00, 0xff, 0x12, KEY_FASTFORWARD },
{ 0x00, 0xff, 0x0e, KEY_PREVIOUS }, /* Recall - Previous channel. */
{ 0x00, 0xff, 0x4c, KEY_PAUSE },
{ 0x00, 0xff, 0x4d, KEY_SCREEN }, /* Full screen mode. */
{ 0x00, 0xff, 0x54, KEY_AUDIO }, /* MTS - Switch to secondary audio. */
/* additional keys TwinHan VisionPlus, the Artec seemingly not have */
{ 0x00, 0xff, 0x0c, KEY_CANCEL }, /* Cancel */
{ 0x00, 0xff, 0x1c, KEY_EPG }, /* EPG */
{ 0x00, 0xff, 0x00, KEY_TAB }, /* Tab */
{ 0x00, 0xff, 0x48, KEY_INFO }, /* Preview */
{ 0x00, 0xff, 0x04, KEY_LIST }, /* RecordList */
{ 0x00, 0xff, 0x0f, KEY_TEXT }, /* Teletext */
/* Key codes for the KWorld/ADSTech/JetWay remote. */
{ 0x86, 0x6b, 0x12, KEY_POWER },
{ 0x86, 0x6b, 0x0f, KEY_SELECT }, /* source */
{ 0x86, 0x6b, 0x0c, KEY_UNKNOWN }, /* scan */
{ 0x86, 0x6b, 0x0b, KEY_EPG },
{ 0x86, 0x6b, 0x10, KEY_MUTE },
{ 0x86, 0x6b, 0x01, KEY_1 },
{ 0x86, 0x6b, 0x02, KEY_2 },
{ 0x86, 0x6b, 0x03, KEY_3 },
{ 0x86, 0x6b, 0x04, KEY_4 },
{ 0x86, 0x6b, 0x05, KEY_5 },
{ 0x86, 0x6b, 0x06, KEY_6 },
{ 0x86, 0x6b, 0x07, KEY_7 },
{ 0x86, 0x6b, 0x08, KEY_8 },
{ 0x86, 0x6b, 0x09, KEY_9 },
{ 0x86, 0x6b, 0x0a, KEY_0 },
{ 0x86, 0x6b, 0x18, KEY_ZOOM },
{ 0x86, 0x6b, 0x1c, KEY_UNKNOWN }, /* preview */
{ 0x86, 0x6b, 0x13, KEY_UNKNOWN }, /* snap */
{ 0x86, 0x6b, 0x00, KEY_UNDO },
{ 0x86, 0x6b, 0x1d, KEY_RECORD },
{ 0x86, 0x6b, 0x0d, KEY_STOP },
{ 0x86, 0x6b, 0x0e, KEY_PAUSE },
{ 0x86, 0x6b, 0x16, KEY_PLAY },
{ 0x86, 0x6b, 0x11, KEY_BACK },
{ 0x86, 0x6b, 0x19, KEY_FORWARD },
{ 0x86, 0x6b, 0x14, KEY_UNKNOWN }, /* pip */
{ 0x86, 0x6b, 0x15, KEY_ESC },
{ 0x86, 0x6b, 0x1a, KEY_UP },
{ 0x86, 0x6b, 0x1e, KEY_DOWN },
{ 0x86, 0x6b, 0x1f, KEY_LEFT },
{ 0x86, 0x6b, 0x1b, KEY_RIGHT },
};
/* Hauppauge NOVA-T USB2 keys */
static const struct { u16 raw; uint32_t key; } haupp_rc_keys [] = {
{ 0xddf, KEY_GOTO },
{ 0xdef, KEY_POWER },
{ 0xce7, KEY_TV },
{ 0xcc7, KEY_VIDEO },
{ 0xccf, KEY_AUDIO },
{ 0xcd7, KEY_MEDIA },
{ 0xcdf, KEY_EPG },
{ 0xca7, KEY_UP },
{ 0xc67, KEY_RADIO },
{ 0xcb7, KEY_LEFT },
{ 0xd2f, KEY_OK },
{ 0xcbf, KEY_RIGHT },
{ 0xcff, KEY_BACK },
{ 0xcaf, KEY_DOWN },
{ 0xc6f, KEY_MENU },
{ 0xc87, KEY_VOLUMEUP },
{ 0xc8f, KEY_VOLUMEDOWN },
{ 0xc97, KEY_CHANNEL },
{ 0xc7f, KEY_MUTE },
{ 0xd07, KEY_CHANNELUP },
{ 0xd0f, KEY_CHANNELDOWN },
{ 0xdbf, KEY_RECORD },
{ 0xdb7, KEY_STOP },
{ 0xd97, KEY_REWIND },
{ 0xdaf, KEY_PLAY },
{ 0xda7, KEY_FASTFORWARD },
{ 0xd27, KEY_LAST }, /* Skip backwards */
{ 0xd87, KEY_PAUSE },
{ 0xcf7, KEY_NEXT },
{ 0xc07, KEY_0 },
{ 0xc0f, KEY_1 },
{ 0xc17, KEY_2 },
{ 0xc1f, KEY_3 },
{ 0xc27, KEY_4 },
{ 0xc2f, KEY_5 },
{ 0xc37, KEY_6 },
{ 0xc3f, KEY_7 },
{ 0xc47, KEY_8 },
{ 0xc4f, KEY_9 },
{ 0xc57, KEY_KPASTERISK },
{ 0xc77, KEY_GRAVE }, /* # */
{ 0xc5f, KEY_RED },
{ 0xd77, KEY_GREEN },
{ 0xdc7, KEY_YELLOW },
{ 0xd4f, KEY_BLUE},
};
static int dibusb_key2event_nec(struct usb_dibusb *dib,u8 rb[5])
{
int i;
switch (rb[0]) {
case DIBUSB_RC_NEC_KEY_PRESSED:
/* rb[1-3] is the actual key, rb[4] is a checksum */
deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
rb[1], rb[2], rb[3], rb[4]);
if ((0xff - rb[3]) != rb[4]) {
deb_rc("remote control checksum failed.\n");
break;
}
/* See if we can match the raw key code. */
for (i = 0; i < sizeof(nec_rc_keys)/sizeof(nec_rc_keys[0]); i++) {
if (nec_rc_keys[i].c0 == rb[1] &&
nec_rc_keys[i].c1 == rb[2] &&
nec_rc_keys[i].c2 == rb[3]) {
dib->last_event = nec_rc_keys[i].key;
return 1;
}
}
break;
case DIBUSB_RC_NEC_KEY_REPEATED:
/* rb[1]..rb[4] are always zero.*/
/* Repeats often seem to occur so for the moment just ignore this. */
return 0;
case DIBUSB_RC_NEC_EMPTY: /* No (more) remote control keys. */
default:
break;
}
return -1;
}
static int dibusb_key2event_hauppauge(struct usb_dibusb *dib,u8 rb[4])
{
u16 raw;
int i,state;
switch (rb[0]) {
case DIBUSB_RC_HAUPPAUGE_KEY_PRESSED:
raw = ((rb[1] & 0x0f) << 8) | rb[2];
state = !!(rb[1] & 0x40);
deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to %04x state: %d\n",rb[1],rb[2],rb[3],raw,state);
for (i = 0; i < sizeof(haupp_rc_keys)/sizeof(haupp_rc_keys[0]); i++) {
if (haupp_rc_keys[i].raw == raw) {
if (dib->last_event == haupp_rc_keys[i].key &&
dib->last_state == state) {
deb_rc("key repeat\n");
return 0;
} else {
dib->last_event = haupp_rc_keys[i].key;
dib->last_state = state;
return 1;
}
}
}
break;
case DIBUSB_RC_HAUPPAUGE_KEY_EMPTY:
default:
break;
}
return -1;
}
/*
* Read the remote control and feed the appropriate event.
* NEC protocol is used for remote controls
*/
static int dibusb_read_remote_control(struct usb_dibusb *dib)
{
u8 b[1] = { DIBUSB_REQ_POLL_REMOTE }, rb[5];
int ret,event = 0;
if ((ret = dibusb_readwrite_usb(dib,b,1,rb,5)))
return ret;
switch (dib->dibdev->dev_cl->remote_type) {
case DIBUSB_RC_NEC_PROTOCOL:
event = dibusb_key2event_nec(dib,rb);
break;
case DIBUSB_RC_HAUPPAUGE_PROTO:
event = dibusb_key2event_hauppauge(dib,rb);
default:
break;
}
/* key repeat */
if (event == 0)
if (++dib->repeat_key_count < dib->rc_key_repeat_count) {
deb_rc("key repeat dropped. (%d)\n",dib->repeat_key_count);
event = -1; /* skip this key repeat */
}
if (event == 1 || event == 0) {
deb_rc("Translated key 0x%04x\n",event);
/* Signal down and up events for this key. */
input_report_key(&dib->rc_input_dev, dib->last_event, 1);
input_report_key(&dib->rc_input_dev, dib->last_event, 0);
input_sync(&dib->rc_input_dev);
if (event == 1)
dib->repeat_key_count = 0;
}
return 0;
}
/* Remote-control poll function - called every dib->rc_query_interval ms to see
whether the remote control has received anything. */
static void dibusb_remote_query(void *data)
{
struct usb_dibusb *dib = (struct usb_dibusb *) data;
/* TODO: need a lock here. We can simply skip checking for the remote control
if we're busy. */
dibusb_read_remote_control(dib);
schedule_delayed_work(&dib->rc_query_work,
msecs_to_jiffies(dib->rc_query_interval));
}
int dibusb_remote_init(struct usb_dibusb *dib)
{
int i;
if (dib->dibdev->dev_cl->remote_type == DIBUSB_RC_NO)
return 0;
/* Initialise the remote-control structures.*/
init_input_dev(&dib->rc_input_dev);
dib->rc_input_dev.evbit[0] = BIT(EV_KEY);
dib->rc_input_dev.keycodesize = sizeof(unsigned char);
dib->rc_input_dev.keycodemax = KEY_MAX;
dib->rc_input_dev.name = DRIVER_DESC " remote control";
switch (dib->dibdev->dev_cl->remote_type) {
case DIBUSB_RC_NEC_PROTOCOL:
for (i=0; i<sizeof(nec_rc_keys)/sizeof(nec_rc_keys[0]); i++)
set_bit(nec_rc_keys[i].key, dib->rc_input_dev.keybit);
break;
case DIBUSB_RC_HAUPPAUGE_PROTO:
for (i=0; i<sizeof(haupp_rc_keys)/sizeof(haupp_rc_keys[0]); i++)
set_bit(haupp_rc_keys[i].key, dib->rc_input_dev.keybit);
break;
default:
break;
}
input_register_device(&dib->rc_input_dev);
INIT_WORK(&dib->rc_query_work, dibusb_remote_query, dib);
/* Start the remote-control polling. */
if (dib->rc_query_interval < 40)
dib->rc_query_interval = 100; /* default */
info("schedule remote query interval to %d msecs.",dib->rc_query_interval);
schedule_delayed_work(&dib->rc_query_work,msecs_to_jiffies(dib->rc_query_interval));
dib->init_state |= DIBUSB_STATE_REMOTE;
return 0;
}
int dibusb_remote_exit(struct usb_dibusb *dib)
{
if (dib->dibdev->dev_cl->remote_type == DIBUSB_RC_NO)
return 0;
if (dib->init_state & DIBUSB_STATE_REMOTE) {
cancel_delayed_work(&dib->rc_query_work);
flush_scheduled_work();
input_unregister_device(&dib->rc_input_dev);
}
dib->init_state &= ~DIBUSB_STATE_REMOTE;
return 0;
}
drivers/media/dvb/dibusb/dvb-dibusb-usb.c deleted 100644 → 0
View file @ 3e05d2b8
/*
* dvb-dibusb-usb.c is part of the driver for mobile USB Budget DVB-T devices
* based on reference design made by DiBcom (http://www.dibcom.fr/)
*
* Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
*
* see dvb-dibusb-core.c for more copyright details.
*
* This file contains functions for initializing and handling the
* usb specific stuff.
*/
#include "dvb-dibusb.h"
#include <linux/version.h>
#include <linux/pci.h>
int dibusb_readwrite_usb(struct usb_dibusb *dib, u8 *wbuf, u16 wlen, u8 *rbuf,
u16 rlen)
{
int actlen,ret = -ENOMEM;
if (wbuf == NULL || wlen == 0)
return -EINVAL;
if ((ret = down_interruptible(&dib->usb_sem)))
return ret;
debug_dump(wbuf,wlen);
ret = usb_bulk_msg(dib->udev,usb_sndbulkpipe(dib->udev,
dib->dibdev->dev_cl->pipe_cmd), wbuf,wlen,&actlen,
DIBUSB_I2C_TIMEOUT);
if (ret)
err("bulk message failed: %d (%d/%d)",ret,wlen,actlen);
else
ret = actlen != wlen ? -1 : 0;
/* an answer is expected, and no error before */
if (!ret && rbuf && rlen) {
ret = usb_bulk_msg(dib->udev,usb_rcvbulkpipe(dib->udev,
dib->dibdev->dev_cl->pipe_cmd),rbuf,rlen,&actlen,
DIBUSB_I2C_TIMEOUT);
if (ret)
err("recv bulk message failed: %d",ret);
else {
deb_alot("rlen: %d\n",rlen);
debug_dump(rbuf,actlen);
}
}
up(&dib->usb_sem);
return ret;
}
/*
* Cypress controls
*/
int dibusb_write_usb(struct usb_dibusb *dib, u8 *buf, u16 len)
{
return dibusb_readwrite_usb(dib,buf,len,NULL,0);
}
#if 0
/*
* #if 0'ing the following functions as they are not in use _now_,
* but probably will be sometime.
*/
/*
* do not use this, just a workaround for a bug,
* which will hopefully never occur :).
*/
int dibusb_interrupt_read_loop(struct usb_dibusb *dib)
{
u8 b[1] = { DIBUSB_REQ_INTR_READ };
return dibusb_write_usb(dib,b,1);
}
#endif
/*
* ioctl for the firmware
*/
static int dibusb_ioctl_cmd(struct usb_dibusb *dib, u8 cmd, u8 *param, int plen)
{
u8 b[34];
int size = plen > 32 ? 32 : plen;
memset(b,0,34);
b[0] = DIBUSB_REQ_SET_IOCTL;
b[1] = cmd;
if (size > 0)
memcpy(&b[2],param,size);
return dibusb_write_usb(dib,b,34); //2+size);
}
/*
* ioctl for power control
*/
int dibusb_hw_wakeup(struct dvb_frontend *fe)
{
struct usb_dibusb *dib = (struct usb_dibusb *) fe->dvb->priv;
u8 b[1] = { DIBUSB_IOCTL_POWER_WAKEUP };
deb_info("dibusb-device is getting up.\n");
switch (dib->dibdev->dev_cl->id) {
case DTT200U:
break;
default:
dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_POWER_MODE, b,1);
break;
}
if (dib->fe_init)
return dib->fe_init(fe);
return 0;
}
int dibusb_hw_sleep(struct dvb_frontend *fe)
{
struct usb_dibusb *dib = (struct usb_dibusb *) fe->dvb->priv;
u8 b[1] = { DIBUSB_IOCTL_POWER_SLEEP };
deb_info("dibusb-device is going to bed.\n");
/* workaround, something is wrong, when dibusb 1.1 device are going to bed too late */
switch (dib->dibdev->dev_cl->id) {
case DIBUSB1_1:
case NOVAT_USB2:
case DTT200U:
break;
default:
dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_POWER_MODE, b,1);
break;
}
if (dib->fe_sleep)
return dib->fe_sleep(fe);
return 0;
}
int dibusb_set_streaming_mode(struct usb_dibusb *dib,u8 mode)
{
u8 b[2] = { DIBUSB_REQ_SET_STREAMING_MODE, mode };
return dibusb_readwrite_usb(dib,b,2,NULL,0);
}
static int dibusb_urb_kill(struct usb_dibusb *dib)
{
int i;
deb_info("trying to kill urbs\n");
if (dib->init_state & DIBUSB_STATE_URB_SUBMIT) {
for (i = 0; i < dib->dibdev->dev_cl->urb_count; i++) {
deb_info("killing URB no. %d.\n",i);
/* stop the URB */
usb_kill_urb(dib->urb_list[i]);
}
} else
deb_info(" URBs not killed.\n");
dib->init_state &= ~DIBUSB_STATE_URB_SUBMIT;
return 0;
}
static int dibusb_urb_submit(struct usb_dibusb *dib)
{
int i,ret;
if (dib->init_state & DIBUSB_STATE_URB_INIT) {
for (i = 0; i < dib->dibdev->dev_cl->urb_count; i++) {
deb_info("submitting URB no. %d\n",i);
if ((ret = usb_submit_urb(dib->urb_list[i],GFP_ATOMIC))) {
err("could not submit buffer urb no. %d - get them all back\n",i);
dibusb_urb_kill(dib);
return ret;
}
dib->init_state |= DIBUSB_STATE_URB_SUBMIT;
}
}
return 0;
}
int dibusb_streaming(struct usb_dibusb *dib,int onoff)
{
if (onoff)
dibusb_urb_submit(dib);
else
dibusb_urb_kill(dib);
switch (dib->dibdev->dev_cl->id) {
case DIBUSB2_0:
case DIBUSB2_0B:
case NOVAT_USB2:
case UMT2_0:
if (onoff)
return dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_ENABLE_STREAM,NULL,0);
else
return dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_DISABLE_STREAM,NULL,0);
break;
default:
break;
}
return 0;
}
int dibusb_urb_init(struct usb_dibusb *dib)
{
int i,bufsize,def_pid_parse = 1;
/*
* when reloading the driver w/o replugging the device
* a timeout occures, this helps
*/
usb_clear_halt(dib->udev,usb_sndbulkpipe(dib->udev,dib->dibdev->dev_cl->pipe_cmd));
usb_clear_halt(dib->udev,usb_rcvbulkpipe(dib->udev,dib->dibdev->dev_cl->pipe_cmd));
usb_clear_halt(dib->udev,usb_rcvbulkpipe(dib->udev,dib->dibdev->dev_cl->pipe_data));
/* allocate the array for the data transfer URBs */
dib->urb_list = kmalloc(dib->dibdev->dev_cl->urb_count*sizeof(struct urb *),GFP_KERNEL);
if (dib->urb_list == NULL)
return -ENOMEM;
memset(dib->urb_list,0,dib->dibdev->dev_cl->urb_count*sizeof(struct urb *));
dib->init_state |= DIBUSB_STATE_URB_LIST;
bufsize = dib->dibdev->dev_cl->urb_count*dib->dibdev->dev_cl->urb_buffer_size;
deb_info("allocate %d bytes as buffersize for all URBs\n",bufsize);
/* allocate the actual buffer for the URBs */
if ((dib->buffer = pci_alloc_consistent(NULL,bufsize,&dib->dma_handle)) == NULL) {
deb_info("not enough memory.\n");
return -ENOMEM;
}
deb_info("allocation complete\n");
memset(dib->buffer,0,bufsize);
dib->init_state |= DIBUSB_STATE_URB_BUF;
/* allocate and submit the URBs */
for (i = 0; i < dib->dibdev->dev_cl->urb_count; i++) {
if (!(dib->urb_list[i] = usb_alloc_urb(0,GFP_ATOMIC))) {
return -ENOMEM;
}
usb_fill_bulk_urb( dib->urb_list[i], dib->udev,
usb_rcvbulkpipe(dib->udev,dib->dibdev->dev_cl->pipe_data),
&dib->buffer[i*dib->dibdev->dev_cl->urb_buffer_size],
dib->dibdev->dev_cl->urb_buffer_size,
dibusb_urb_complete, dib);
dib->urb_list[i]->transfer_flags = 0;
dib->init_state |= DIBUSB_STATE_URB_INIT;
}
/* dib->pid_parse here contains the value of the module parameter */
/* decide if pid parsing can be deactivated:
* is possible (by device type) and wanted (by user)
*/
switch (dib->dibdev->dev_cl->id) {
case DIBUSB2_0:
case DIBUSB2_0B:
if (dib->udev->speed == USB_SPEED_HIGH && !dib->pid_parse) {
def_pid_parse = 0;
info("running at HIGH speed, will deliver the complete TS.");
} else
info("will use pid_parsing.");
break;
default:
break;
}
/* from here on it contains the device and user decision */
dib->pid_parse = def_pid_parse;
return 0;
}
int dibusb_urb_exit(struct usb_dibusb *dib)
{
int i;
dibusb_urb_kill(dib);
if (dib->init_state & DIBUSB_STATE_URB_LIST) {
for (i = 0; i < dib->dibdev->dev_cl->urb_count; i++) {
if (dib->urb_list[i] != NULL) {
deb_info("freeing URB no. %d.\n",i);
/* free the URBs */
usb_free_urb(dib->urb_list[i]);
}
}
/* free the urb array */
kfree(dib->urb_list);
dib->init_state &= ~DIBUSB_STATE_URB_LIST;
}
if (dib->init_state & DIBUSB_STATE_URB_BUF)
pci_free_consistent(NULL,
dib->dibdev->dev_cl->urb_buffer_size*dib->dibdev->dev_cl->urb_count,
dib->buffer,dib->dma_handle);
dib->init_state &= ~DIBUSB_STATE_URB_BUF;
dib->init_state &= ~DIBUSB_STATE_URB_INIT;
return 0;
}
drivers/media/dvb/dibusb/dvb-dibusb.h deleted 100644 → 0
View file @ 3e05d2b8
/*
* dvb-dibusb.h
*
* Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2.
*
* for more information see dvb-dibusb-core.c .
*/
#ifndef __DVB_DIBUSB_H__
#define __DVB_DIBUSB_H__
#include <linux/input.h>
#include <linux/config.h>
#include <linux/usb.h>
#include "dvb_frontend.h"
#include "dvb_demux.h"
#include "dvb_net.h"
#include "dmxdev.h"
#include "dib3000.h"
#include "mt352.h"
/* debug */
#ifdef CONFIG_DVB_DIBCOM_DEBUG
#define dprintk(level,args...) \
do { if ((dvb_dibusb_debug & level)) { printk(args); } } while (0)
#define debug_dump(b,l) {\
int i; \
for (i = 0; i < l; i++) deb_xfer("%02x ", b[i]); \
deb_xfer("\n");\
}
#else
#define dprintk(args...)
#define debug_dump(b,l)
#endif
extern int dvb_dibusb_debug;
/* Version information */
#define DRIVER_VERSION "0.3"
#define DRIVER_DESC "DiBcom based USB Budget DVB-T device"
#define DRIVER_AUTHOR "Patrick Boettcher, patrick.boettcher@desy.de"
#define deb_info(args...) dprintk(0x01,args)
#define deb_xfer(args...) dprintk(0x02,args)
#define deb_alot(args...) dprintk(0x04,args)
#define deb_ts(args...) dprintk(0x08,args)
#define deb_err(args...) dprintk(0x10,args)
#define deb_rc(args...) dprintk(0x20,args)
/* generic log methods - taken from usb.h */
#undef err
#define err(format, arg...) printk(KERN_ERR "dvb-dibusb: " format "\n" , ## arg)
#undef info
#define info(format, arg...) printk(KERN_INFO "dvb-dibusb: " format "\n" , ## arg)
#undef warn
#define warn(format, arg...) printk(KERN_WARNING "dvb-dibusb: " format "\n" , ## arg)
struct dibusb_usb_controller {
const char *name; /* name of the usb controller */
u16 cpu_cs_register; /* needs to be restarted, when the firmware has been downloaded. */
};
typedef enum {
DIBUSB1_1 = 0,
DIBUSB1_1_AN2235,
DIBUSB2_0,
UMT2_0,
DIBUSB2_0B,
NOVAT_USB2,
DTT200U,
} dibusb_class_t;
typedef enum {
DIBUSB_TUNER_CABLE_THOMSON = 0,
DIBUSB_TUNER_COFDM_PANASONIC_ENV57H1XD5,
DIBUSB_TUNER_CABLE_LG_TDTP_E102P,
DIBUSB_TUNER_COFDM_PANASONIC_ENV77H11D5,
} dibusb_tuner_t;
typedef enum {
DIBUSB_DIB3000MB = 0,
DIBUSB_DIB3000MC,
DIBUSB_MT352,
DTT200U_FE,
} dibusb_demodulator_t;
typedef enum {
DIBUSB_RC_NO = 0,
DIBUSB_RC_NEC_PROTOCOL,
DIBUSB_RC_HAUPPAUGE_PROTO,
} dibusb_remote_t;
struct dibusb_tuner {
dibusb_tuner_t id;
u8 pll_addr; /* tuner i2c address */
};
extern struct dibusb_tuner dibusb_tuner[];
#define DIBUSB_POSSIBLE_I2C_ADDR_NUM 4
struct dibusb_demod {
dibusb_demodulator_t id;
int pid_filter_count; /* counter of the internal pid_filter */
u8 i2c_addrs[DIBUSB_POSSIBLE_I2C_ADDR_NUM]; /* list of possible i2c addresses of the demod */
};
#define DIBUSB_MAX_TUNER_NUM 2
struct dibusb_device_class {
dibusb_class_t id;
const struct dibusb_usb_controller *usb_ctrl; /* usb controller */
const char *firmware; /* valid firmware filenames */
int pipe_cmd; /* command pipe (read/write) */
int pipe_data; /* data pipe */
int urb_count; /* number of data URBs to be submitted */
int urb_buffer_size; /* the size of the buffer for each URB */
dibusb_remote_t remote_type; /* does this device have a ir-receiver */
struct dibusb_demod *demod; /* which demodulator is mount */
struct dibusb_tuner *tuner; /* which tuner can be found here */
};
#define DIBUSB_ID_MAX_NUM 15
struct dibusb_usb_device {
const char *name; /* real name of the box */
struct dibusb_device_class *dev_cl; /* which dibusb_device_class is this device part of */
struct usb_device_id *cold_ids[DIBUSB_ID_MAX_NUM]; /* list of USB ids when this device is at pre firmware state */
struct usb_device_id *warm_ids[DIBUSB_ID_MAX_NUM]; /* list of USB ids when this device is at post firmware state */
};
/* a PID for the pid_filter list, when in use */
struct dibusb_pid
{
int index;
u16 pid;
int active;
};
struct usb_dibusb {
/* usb */
struct usb_device * udev;
struct dibusb_usb_device * dibdev;
#define DIBUSB_STATE_INIT 0x000
#define DIBUSB_STATE_URB_LIST 0x001
#define DIBUSB_STATE_URB_BUF 0x002
#define DIBUSB_STATE_URB_INIT 0x004
#define DIBUSB_STATE_DVB 0x008
#define DIBUSB_STATE_I2C 0x010
#define DIBUSB_STATE_REMOTE 0x020
#define DIBUSB_STATE_URB_SUBMIT 0x040
int init_state;
int feedcount;
struct dib_fe_xfer_ops xfer_ops;
struct dibusb_tuner *tuner;
struct urb **urb_list;
u8 *buffer;
dma_addr_t dma_handle;
/* I2C */
struct i2c_adapter i2c_adap;
/* locking */
struct semaphore usb_sem;
struct semaphore i2c_sem;
/* dvb */
struct dvb_adapter adapter;
struct dmxdev dmxdev;
struct dvb_demux demux;
struct dvb_net dvb_net;
struct dvb_frontend* fe;
int (*fe_sleep) (struct dvb_frontend *);
int (*fe_init) (struct dvb_frontend *);
/* remote control */
struct input_dev rc_input_dev;
struct work_struct rc_query_work;
int last_event;
int last_state; /* for Hauppauge RC protocol */
int repeat_key_count;
int rc_key_repeat_count; /* module parameter */
/* module parameters */
int pid_parse;
int rc_query_interval;
};
/* commonly used functions in the separated files */
/* dvb-dibusb-firmware.c */
int dibusb_loadfirmware(struct usb_device *udev, struct dibusb_usb_device *dibdev);
/* dvb-dibusb-remote.c */
int dibusb_remote_exit(struct usb_dibusb *dib);
int dibusb_remote_init(struct usb_dibusb *dib);
/* dvb-dibusb-fe-i2c.c */
int dibusb_fe_init(struct usb_dibusb* dib);
int dibusb_fe_exit(struct usb_dibusb *dib);
int dibusb_i2c_init(struct usb_dibusb *dib);
int dibusb_i2c_exit(struct usb_dibusb *dib);
/* dvb-dibusb-dvb.c */
void dibusb_urb_complete(struct urb *urb, struct pt_regs *ptregs);
int dibusb_dvb_init(struct usb_dibusb *dib);
int dibusb_dvb_exit(struct usb_dibusb *dib);
/* dvb-dibusb-usb.c */
int dibusb_readwrite_usb(struct usb_dibusb *dib, u8 *wbuf, u16 wlen, u8 *rbuf,
u16 rlen);
int dibusb_write_usb(struct usb_dibusb *dib, u8 *buf, u16 len);
int dibusb_hw_wakeup(struct dvb_frontend *);
int dibusb_hw_sleep(struct dvb_frontend *);
int dibusb_set_streaming_mode(struct usb_dibusb *,u8);
int dibusb_streaming(struct usb_dibusb *,int);
int dibusb_urb_init(struct usb_dibusb *);
int dibusb_urb_exit(struct usb_dibusb *);
/* dvb-fe-dtt200u.c */
struct dvb_frontend* dtt200u_fe_attach(struct usb_dibusb *,struct dib_fe_xfer_ops *);
/* i2c and transfer stuff */
#define DIBUSB_I2C_TIMEOUT 5000
/*
* protocol of all dibusb related devices
*/
/*
* bulk msg to/from endpoint 0x01
*
* general structure:
* request_byte parameter_bytes
*/
#define DIBUSB_REQ_START_READ 0x00
#define DIBUSB_REQ_START_DEMOD 0x01
/*
* i2c read
* bulk write: 0x02 ((7bit i2c_addr << 1) & 0x01) register_bytes length_word
* bulk read: byte_buffer (length_word bytes)
*/
#define DIBUSB_REQ_I2C_READ 0x02
/*
* i2c write
* bulk write: 0x03 (7bit i2c_addr << 1) register_bytes value_bytes
*/
#define DIBUSB_REQ_I2C_WRITE 0x03
/*
* polling the value of the remote control
* bulk write: 0x04
* bulk read: byte_buffer (5 bytes)
*
* first byte of byte_buffer shows the status (0x00, 0x01, 0x02)
*/
#define DIBUSB_REQ_POLL_REMOTE 0x04
#define DIBUSB_RC_NEC_EMPTY 0x00
#define DIBUSB_RC_NEC_KEY_PRESSED 0x01
#define DIBUSB_RC_NEC_KEY_REPEATED 0x02
/* additional status values for Hauppauge Remote Control Protocol */
#define DIBUSB_RC_HAUPPAUGE_KEY_PRESSED 0x01
#define DIBUSB_RC_HAUPPAUGE_KEY_EMPTY 0x03
/* streaming mode:
* bulk write: 0x05 mode_byte
*
* mode_byte is mostly 0x00
*/
#define DIBUSB_REQ_SET_STREAMING_MODE 0x05
/* interrupt the internal read loop, when blocking */
#define DIBUSB_REQ_INTR_READ 0x06
/* io control
* 0x07 cmd_byte param_bytes
*
* param_bytes can be up to 32 bytes
*
* cmd_byte function parameter name
* 0x00 power mode
* 0x00 sleep
* 0x01 wakeup
*
* 0x01 enable streaming
* 0x02 disable streaming
*
*
*/
#define DIBUSB_REQ_SET_IOCTL 0x07
/* IOCTL commands */
/* change the power mode in firmware */
#define DIBUSB_IOCTL_CMD_POWER_MODE 0x00
#define DIBUSB_IOCTL_POWER_SLEEP 0x00
#define DIBUSB_IOCTL_POWER_WAKEUP 0x01
/* modify streaming of the FX2 */
#define DIBUSB_IOCTL_CMD_ENABLE_STREAM 0x01
#define DIBUSB_IOCTL_CMD_DISABLE_STREAM 0x02
#endif
drivers/media/dvb/dibusb/dvb-fe-dtt200u.c deleted 100644 → 0
View file @ 3e05d2b8
/*
* dvb-dtt200u-fe.c is a driver which implements the frontend-part of the
* Yakumo/Typhoon/Hama USB2.0 boxes. It is hard-wired to the dibusb-driver as
* it uses the usb-transfer functions directly (maybe creating a
* generic-dvb-usb-lib for all usb-drivers will be reduce some more code.)
*
* Copyright (C) 2005 Patrick Boettcher <patrick.boettcher@desy.de>
*
* see dvb-dibusb-core.c for copyright details.
*/
/* guessed protocol description (reverse engineered):
* read
* 00 - USB type 0x02 for usb2.0, 0x01 for usb1.1
* 81 - <TS_LOCK> <current frequency divided by 250000>
* 82 - crash - do not touch
* 83 - crash - do not touch
* 84 - remote control
* 85 - crash - do not touch (OK, stop testing here)
* 88 - locking 2 bytes (0x80 0x40 == no signal, 0x89 0x20 == nice signal)
* 89 - noise-to-signal
* 8a - unkown 1 byte - signal_strength
* 8c - ber ???
* 8d - ber
* 8e - unc
*
* write
* 02 - bandwidth
* 03 - frequency (divided by 250000)
* 04 - pid table (index pid(7:0) pid(12:8))
* 05 - reset the pid table
* 08 - demod transfer enabled or not (FX2 transfer is enabled by default)
*/
#include "dvb-dibusb.h"
#include "dvb_frontend.h"
struct dtt200u_fe_state {
struct usb_dibusb *dib;
struct dvb_frontend_parameters fep;
struct dvb_frontend frontend;
};
#define moan(which,what) info("unexpected value in '%s' for cmd '%02x' - please report to linux-dvb@linuxtv.org",which,what)
static int dtt200u_fe_read_status(struct dvb_frontend* fe, fe_status_t *stat)
{
struct dtt200u_fe_state *state = fe->demodulator_priv;
u8 bw[1] = { 0x81 };
u8 br[3] = { 0 };
// u8 bdeb[5] = { 0 };
dibusb_readwrite_usb(state->dib,bw,1,br,3);
switch (br[0]) {
case 0x01:
*stat = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
break;
case 0x00:
*stat = 0;
break;
default:
moan("br[0]",0x81);
break;
}
// bw[0] = 0x88;
// dibusb_readwrite_usb(state->dib,bw,1,bdeb,5);
// deb_info("%02x: %02x %02x %02x %02x %02x\n",bw[0],bdeb[0],bdeb[1],bdeb[2],bdeb[3],bdeb[4]);
return 0;
}
static int dtt200u_fe_read_ber(struct dvb_frontend* fe, u32 *ber)
{
struct dtt200u_fe_state *state = fe->demodulator_priv;
u8 bw[1] = { 0x8d };
*ber = 0;
dibusb_readwrite_usb(state->dib,bw,1,(u8*) ber, 3);
return 0;
}
static int dtt200u_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc)
{
struct dtt200u_fe_state *state = fe->demodulator_priv;
u8 bw[1] = { 0x8c };
*unc = 0;
dibusb_readwrite_usb(state->dib,bw,1,(u8*) unc, 3);
return 0;
}
static int dtt200u_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength)
{
struct dtt200u_fe_state *state = fe->demodulator_priv;
u8 bw[1] = { 0x8a };
u8 b;
dibusb_readwrite_usb(state->dib,bw,1,&b, 1);
*strength = (b << 8) | b;
return 0;
}
static int dtt200u_fe_read_snr(struct dvb_frontend* fe, u16 *snr)
{
struct dtt200u_fe_state *state = fe->demodulator_priv;
u8 bw[1] = { 0x89 };
u8 br[1] = { 0 };
dibusb_readwrite_usb(state->dib,bw,1,br,1);
*snr = ((0xff - br[0]) << 8) | (0xff - br[0]);
return 0;
}
static int dtt200u_fe_init(struct dvb_frontend* fe)
{
struct dtt200u_fe_state *state = fe->demodulator_priv;
u8 b[] = { 0x01 };
return dibusb_write_usb(state->dib,b,1);
}
static int dtt200u_fe_sleep(struct dvb_frontend* fe)
{
return dtt200u_fe_init(fe);
}
static int dtt200u_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
{
tune->min_delay_ms = 1500;
tune->step_size = 166667;
tune->max_drift = 166667 * 2;
return 0;
}
static int dtt200u_fe_set_frontend(struct dvb_frontend* fe,
struct dvb_frontend_parameters *fep)
{
struct dtt200u_fe_state *state = fe->demodulator_priv;
u16 freq = fep->frequency / 250000;
u8 bw,bwbuf[2] = { 0x03, 0 }, freqbuf[3] = { 0x02, 0, 0 };
switch (fep->u.ofdm.bandwidth) {
case BANDWIDTH_8_MHZ: bw = 8; break;
case BANDWIDTH_7_MHZ: bw = 7; break;
case BANDWIDTH_6_MHZ: bw = 6; break;
case BANDWIDTH_AUTO: return -EOPNOTSUPP;
default:
return -EINVAL;
}
deb_info("set_frontend\n");
bwbuf[1] = bw;
dibusb_write_usb(state->dib,bwbuf,2);
freqbuf[1] = freq & 0xff;
freqbuf[2] = (freq >> 8) & 0xff;
dibusb_write_usb(state->dib,freqbuf,3);
memcpy(&state->fep,fep,sizeof(struct dvb_frontend_parameters));
return 0;
}
static int dtt200u_fe_get_frontend(struct dvb_frontend* fe,
struct dvb_frontend_parameters *fep)
{
struct dtt200u_fe_state *state = fe->demodulator_priv;
memcpy(fep,&state->fep,sizeof(struct dvb_frontend_parameters));
return 0;
}
static void dtt200u_fe_release(struct dvb_frontend* fe)
{
struct dtt200u_fe_state *state = (struct dtt200u_fe_state*) fe->demodulator_priv;
kfree(state);
}
static int dtt200u_pid_control(struct dvb_frontend *fe,int index, int pid,int onoff)
{
struct dtt200u_fe_state *state = (struct dtt200u_fe_state*) fe->demodulator_priv;
u8 b_pid[4];
pid = onoff ? pid : 0;
b_pid[0] = 0x04;
b_pid[1] = index;
b_pid[2] = pid & 0xff;
b_pid[3] = (pid >> 8) & 0xff;
dibusb_write_usb(state->dib,b_pid,4);
return 0;
}
static int dtt200u_fifo_control(struct dvb_frontend *fe, int onoff)
{
struct dtt200u_fe_state *state = (struct dtt200u_fe_state*) fe->demodulator_priv;
u8 b_streaming[2] = { 0x08, onoff };
u8 b_rst_pid[1] = { 0x05 };
dibusb_write_usb(state->dib,b_streaming,2);
if (!onoff)
dibusb_write_usb(state->dib,b_rst_pid,1);
return 0;
}
static struct dvb_frontend_ops dtt200u_fe_ops;
struct dvb_frontend* dtt200u_fe_attach(struct usb_dibusb *dib, struct dib_fe_xfer_ops *xfer_ops)
{
struct dtt200u_fe_state* state = NULL;
/* allocate memory for the internal state */
state = (struct dtt200u_fe_state*) kmalloc(sizeof(struct dtt200u_fe_state), GFP_KERNEL);
if (state == NULL)
goto error;
memset(state,0,sizeof(struct dtt200u_fe_state));
deb_info("attaching frontend dtt200u\n");
state->dib = dib;
state->frontend.ops = &dtt200u_fe_ops;
state->frontend.demodulator_priv = state;
xfer_ops->fifo_ctrl = dtt200u_fifo_control;
xfer_ops->pid_ctrl = dtt200u_pid_control;
goto success;
error:
return NULL;
success:
return &state->frontend;
}
static struct dvb_frontend_ops dtt200u_fe_ops = {
.info = {
.name = "DTT200U (Yakumo/Typhoon/Hama) DVB-T",
.type = FE_OFDM,
.frequency_min = 44250000,
.frequency_max = 867250000,
.frequency_stepsize = 250000,
.caps = FE_CAN_INVERSION_AUTO |
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
FE_CAN_TRANSMISSION_MODE_AUTO |
FE_CAN_GUARD_INTERVAL_AUTO |
FE_CAN_RECOVER |
FE_CAN_HIERARCHY_AUTO,
},
.release = dtt200u_fe_release,
.init = dtt200u_fe_init,
.sleep = dtt200u_fe_sleep,
.set_frontend = dtt200u_fe_set_frontend,
.get_frontend = dtt200u_fe_get_frontend,
.get_tune_settings = dtt200u_fe_get_tune_settings,
.read_status = dtt200u_fe_read_status,
.read_ber = dtt200u_fe_read_ber,
.read_signal_strength = dtt200u_fe_read_signal_strength,
.read_snr = dtt200u_fe_read_snr,
.read_ucblocks = dtt200u_fe_read_unc_blocks,
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment