[POWERPC] 83xx: Add base support for the MPC8313E RDB

Add support for the MPC8313E Reference Development Board (RDB).  The board
is a mini-ITX reference board with 128M DDR2, 8M flash, 32M NAND, USB, PCI,
gigabit ethernet, and serial.
Signed-off-by: Wilson Lo <Wilson.Lo@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/powerpc/boot/dts/mpc8313erdb.dts

+/*
+ * MPC8313E RDB Device Tree Source
+ *
+ * Copyright 2005, 2006, 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/ {
+	model = "MPC8313ERDB";
+	compatible = "MPC83xx";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8313@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <4000>;		// L1, 16K
+			i-cache-size = <4000>;		// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+			32-bit;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 08000000>;	// 128MB at 0
+	};
+
+	soc8313@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <200 100>;
+		};
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <e 8>;
+			interrupt-parent = <700>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3100 100>;
+			interrupts = <f 8>;
+			interrupt-parent = <700>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			device_type = "spi";
+			compatible = "mpc83xx_spi";
+			reg = <7000 1000>;
+			interrupts = <10 8>;
+			interrupt-parent = <700>;
+			mode = <0>;
+		};
+
+		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+		usb@23000 {
+			device_type = "usb";
+			compatible = "fsl-usb2-dr";
+			reg = <23000 1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <700>;
+			interrupts = <26 2>;
+			phy_type = "utmi_wide";
+		};
+
+		mdio@24520 {
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linux,phandle = <24520>;
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <700>;
+				interrupts = <13 2>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@4 {
+				linux,phandle = <2452004>;
+				interrupt-parent = <700>;
+				interrupts = <14 2>;
+				reg = <4>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <25 8 24 8 23 8>;
+			interrupt-parent = <700>;
+			phy-handle = <2452001>;
+		};
+
+		ethernet@25000 {
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <22 8 21 8 20 8>;
+			interrupt-parent = <700>;
+			phy-handle = <2452004>;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>;
+			clock-frequency = <0>;
+			interrupts = <9 8>;
+			interrupt-parent = <700>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;
+			clock-frequency = <0>;
+			interrupts = <a 8>;
+			interrupt-parent = <700>;
+		};
+
+		pci@8500 {
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+					/* IDSEL 0x0E -mini PCI */
+					 7000 0 0 1 700 12 8
+					 7000 0 0 2 700 12 8
+					 7000 0 0 3 700 12 8
+					 7000 0 0 4 700 12 8
+
+					/* IDSEL 0x0F - PCI slot */
+					 7800 0 0 1 700 11 8
+					 7800 0 0 2 700 12 8
+					 7800 0 0 3 700 11 8
+					 7800 0 0 4 700 12 8>;
+			interrupt-parent = <700>;
+			interrupts = <42 8>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 90000000 90000000 0 10000000
+			          42000000 0 80000000 80000000 0 10000000
+			          01000000 0 00000000 e2000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8500 100>;
+			compatible = "83xx";
+			device_type = "pci";
+		};
+
+		crypto@30000 {
+			device_type = "crypto";
+			model = "SEC2";
+			compatible = "talitos";
+			reg = <30000 7000>;
+			interrupts = <b 8>;
+			interrupt-parent = <700>;
+			/* Rev. 2.2 */
+			num-channels = <1>;
+			channel-fifo-len = <18>;
+			exec-units-mask = <0000004c>;
+			descriptor-types-mask = <0122003f>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		pic@700 {
+			linux,phandle = <700>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <700 100>;
+			built-in;
+			device_type = "ipic";
+		};
+	};
+};

arch/powerpc/platforms/83xx/Kconfig

@@ -5,6 +5,12 @@ choice
 	prompt "Machine Type"
 	default MPC834x_SYS
 
+config MPC8313_RDB
+	bool "Freescale MPC8313 RDB"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the MPC8313 RDB board.
+
 config MPC832x_MDS
 	bool "Freescale MPC832x MDS"
 	select DEFAULT_UIMAGE
@@ -41,6 +47,12 @@ config MPC8360E_PB
 
 endchoice
 
+config PPC_MPC831x
+	bool
+	select PPC_UDBG_16550
+	select PPC_INDIRECT_PCI
+	default y if MPC8313_RDB
+
 config PPC_MPC832x
 	bool
 	select PPC_UDBG_16550

arch/powerpc/platforms/83xx/Makefile

@@ -3,6 +3,7 @@
 #
 obj-y				:= misc.o
 obj-$(CONFIG_PCI)		+= pci.o
+obj-$(CONFIG_MPC8313_RDB)	+= mpc8313_rdb.o
 obj-$(CONFIG_MPC834x_SYS)	+= mpc834x_sys.o
 obj-$(CONFIG_MPC834x_ITX)	+= mpc834x_itx.o
 obj-$(CONFIG_MPC8360E_PB)	+= mpc8360e_pb.o

arch/powerpc/platforms/83xx/mpc8313_rdb.c

+/*
+ * arch/powerpc/platforms/83xx/mpc8313_rdb.c
+ *
+ * Description: MPC8313x RDB board specific routines.
+ * This file is based on mpc834x_sys.c
+ * Author: Lo Wlison <r43300@freescale.com>
+ *
+ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/pci.h>
+
+#include <asm/time.h>
+#include <asm/ipic.h>
+#include <asm/udbg.h>
+
+#include "mpc83xx.h"
+
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+#endif
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init mpc8313_rdb_setup_arch(void)
+{
+	struct device_node *np;
+
+	if (ppc_md.progress)
+		ppc_md.progress("mpc8313_rdb_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
+		add_bridge(np);
+
+	ppc_md.pci_exclude_device = mpc83xx_exclude_device;
+#endif
+}
+
+void __init mpc8313_rdb_init_IRQ(void)
+{
+	struct device_node *np;
+
+	np = of_find_node_by_type(NULL, "ipic");
+	if (!np)
+		return;
+
+	ipic_init(np, 0);
+
+	/* Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	ipic_set_default_priority();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc8313_rdb_probe(void)
+{
+	char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
+					  "model", NULL);
+	if (model == NULL)
+		return 0;
+	if (strcmp(model, "MPC8313ERDB"))
+		return 0;
+
+	DBG("MPC8313 RDB found\n");
+
+	return 1;
+}
+
+define_machine(mpc8313_rdb) {
+	.name			= "MPC8313 RDB",
+	.probe			= mpc8313_rdb_probe,
+	.setup_arch		= mpc8313_rdb_setup_arch,
+	.init_IRQ		= mpc8313_rdb_init_IRQ,
+	.get_irq		= ipic_get_irq,
+	.restart		= mpc83xx_restart,
+	.time_init		= mpc83xx_time_init,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};