ARM: OMAP: Fixed merge conflicts

Fixed merge conflicts

drivers/video/Kconfig

@@ -650,7 +650,6 @@ config FB_NVIDIA
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This driver supports graphics boards with the nVidia chips, TNT
 	  and newer. For very old chipsets, such as the RIVA128, then use
@@ -681,7 +680,6 @@ config FB_RIVA
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This driver supports graphics boards with the nVidia Riva/Geforce
 	  chips.
@@ -720,7 +718,6 @@ config FB_I810
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This driver supports the on-board graphics built in to the Intel 810 
           and 815 chipsets.  Say Y if you have and plan to use such a board.
@@ -754,6 +751,12 @@ config FB_I810_GTF
   
           If unsure, say N.
 
+config FB_I810_I2C
+	bool "Enable DDC Support"
+	depends on FB_I810 && I2C && FB_I810_GTF
+	select I2C_ALGOBIT
+	help
+
 config FB_INTEL
 	tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)"
 	depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64
@@ -763,7 +766,6 @@ config FB_INTEL
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This driver supports the on-board graphics built in to the Intel
           830M/845G/852GM/855GM/865G chipsets.
@@ -960,8 +962,7 @@ config FB_RADEON
 	  can be build either as modules or built-in.
 
 	  There is a product page at
-	  <http://www.ati.com/na/pages/products/pc/radeon32/index.html>.
-
+	  http://apps.ati.com/ATIcompare/
 config FB_RADEON_I2C
 	bool "DDC/I2C for ATI Radeon support"
 	depends on FB_RADEON
@@ -1084,15 +1085,16 @@ config FB_SAVAGE_ACCEL
           choose N here.
 
 config FB_SIS
-	tristate "SiS acceleration"
+	tristate "SiS/XGI display support"
 	depends on FB && PCI
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
 	select FB_SOFT_CURSOR
 	help
-	  This is the frame buffer device driver for the SiS 300, 315 and
-	  330 series VGA chipsets. Specs available at <http://www.sis.com>
+	  This is the frame buffer device driver for the SiS 300, 315, 330
+	  and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
+	  Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
 
 	  To compile this driver as a module, choose M here; the module
 	  will be called sisfb.
@@ -1104,11 +1106,12 @@ config FB_SIS_300
 	  Say Y here to support use of the SiS 300/305, 540, 630 and 730.
 
 config FB_SIS_315
-	bool "SiS 315/330 series support"
+	bool "SiS 315/330/340 series and XGI support"
 	depends on FB_SIS
 	help
-	  Say Y here to support use of the SiS 315 and 330 series
-	  (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760).
+	  Say Y here to support use of the SiS 315, 330 and 340 series
+	  (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
+	  as XGI V3XT, V5, V8 and Z7.
 
 config FB_NEOMAGIC
 	tristate "NeoMagic display support"
@@ -1180,6 +1183,32 @@ config FB_VOODOO1
 	  Please read the <file:Documentation/fb/README-sstfb.txt> for supported
 	  options and other important info  support.
 
+config FB_CYBLA
+	tristate "Cyberblade/i1 support"
+	depends on FB && PCI
+	select FB_CFB_IMAGEBLIT
+	select FB_SOFT_CURSOR
+	select VIDEO_SELECT
+	---help---
+	  This driver is supposed to support the Trident Cyberblade/i1
+	  graphics core integrated in the VIA VT8601A North Bridge,
+	  also known as VIA Apollo PLE133.
+
+	  Status:
+	   - Developed, tested and working on EPIA 5000 and EPIA 800.
+	   - Does work reliable on all systems with CRT/LCD connected to
+	     normal VGA ports.
+	   - Should work on systems that do use the internal LCD port, but
+	     this is absolutely not tested.
+
+	  Character imageblit, copyarea and rectangle fill are hw accelerated,
+	  ypan scrolling is used by default.
+
+	  Please do read <file:Documentation/fb/cyblafb/*>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cyblafb.
+
 config FB_TRIDENT
 	tristate "Trident support"
 	depends on FB && PCI
@@ -1193,8 +1222,12 @@ config FB_TRIDENT
 	  but also on some motherboards. For more information, read
 	  <file:Documentation/fb/tridentfb.txt>
 
+	  Cyberblade/i1 support will be removed soon, use the cyblafb driver
+	  instead.
+
 	  Say Y if you have such a graphics board.
 
+
 	  To compile this driver as a module, choose M here: the
 	  module will be called tridentfb.
 
@@ -1205,7 +1238,6 @@ config FB_TRIDENT_ACCEL
 	This will compile the Trident frame buffer device with
 	acceleration functions.
 
-
 config FB_PM3
 	tristate "Permedia3 support"
 	depends on FB && PCI && BROKEN
@@ -1484,6 +1516,30 @@ config FB_S1D13XXX
 	  working with S1D13806). Product specs at
 	  <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
 
+config FB_S3C2410
+	tristate "S3C2410 LCD framebuffer support"
+	depends on FB && ARCH_S3C2410
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_SOFT_CURSOR
+	---help---
+	  Frame buffer driver for the built-in LCD controller in the Samsung
+	  S3C2410 processor.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted and removed from the running kernel whenever you want). The
+	  module will be called s3c2410fb. If you want to compile it as a module,
+	  say M here and read <file:Documentation/modules.txt>.
+
+	  If unsure, say N.
+config FB_S3C2410_DEBUG
+	bool "S3C2410 lcd debug messages"
+	depends on FB_S3C2410
+	help
+	  Turn on debugging messages. Note that you can set/unset at run time
+	  through sysfs
+
 config FB_OMAP
 	tristate "OMAP frame buffer support (EXPERIMENTAL)"
         depends on FB && ARCH_OMAP1

include/asm-arm/cacheflush.h

@@ -256,9 +256,34 @@ extern void dmac_flush_range(unsigned long, unsigned long);
  * Convert calls to our calling convention.
  */
 #define flush_cache_all()		__cpuc_flush_kern_all()
+#ifndef CONFIG_CPU_CACHE_VIPT
+static inline void flush_cache_mm(struct mm_struct *mm)
+{
+	if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
+		__cpuc_flush_user_all();
+}
+
+static inline void
+flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
+{
+	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask))
+		__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
+					vma->vm_flags);
+}
+
+static inline void
+flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
+{
+	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+		unsigned long addr = user_addr & PAGE_MASK;
+		__cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
+	}
+}
+#else
 extern void flush_cache_mm(struct mm_struct *mm);
 extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
 extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn);
+#endif
 
 /*
  * flush_cache_user_range is used when we want to ensure that the

include/linux/fb.h

@@ -107,7 +107,9 @@
 #define FB_ACCEL_NV_20          44      /* nVidia Arch 20               */
 #define FB_ACCEL_NV_30          45      /* nVidia Arch 30               */
 #define FB_ACCEL_NV_40          46      /* nVidia Arch 40               */
-#define FB_ACCEL_OMAP1610       47	/* TI OMAP16xx */
+#define FB_ACCEL_XGI_VOLARI_V	47	/* XGI Volari V3XT, V5, V8      */
+#define FB_ACCEL_XGI_VOLARI_Z	48	/* XGI Volari Z7                */
+#define FB_ACCEL_OMAP1610       49	/* TI OMAP16xx                  */
 #define FB_ACCEL_NEOMAGIC_NM2070 90	/* NeoMagic NM2070              */
 #define FB_ACCEL_NEOMAGIC_NM2090 91	/* NeoMagic NM2090              */
 #define FB_ACCEL_NEOMAGIC_NM2093 92	/* NeoMagic NM2093              */
@@ -496,6 +498,9 @@ struct fb_cursor_user {
 #define FB_EVENT_BLANK                  0x08
 /*      Private modelist is to be replaced */
 #define FB_EVENT_NEW_MODELIST           0x09
+/*	The resolution of the passed in fb_info about to change and
+        all vc's should be changed         */
+#define FB_EVENT_MODE_CHANGE_ALL	0x0A
 
 struct fb_event {
 	struct fb_info *info;
@@ -821,13 +826,29 @@ extern void fb_pad_unaligned_buffer(u8 *dst, u32 d_pitch, u8 *src, u32 idx,
 				u32 height, u32 shift_high, u32 shift_low, u32 mod);
 extern void fb_pad_aligned_buffer(u8 *dst, u32 d_pitch, u8 *src, u32 s_pitch, u32 height);
 extern void fb_set_suspend(struct fb_info *info, int state);
-extern int fb_get_color_depth(struct fb_var_screeninfo *var);
+extern int fb_get_color_depth(struct fb_var_screeninfo *var,
+			      struct fb_fix_screeninfo *fix);
 extern int fb_get_options(char *name, char **option);
 extern int fb_new_modelist(struct fb_info *info);
 
 extern struct fb_info *registered_fb[FB_MAX];
 extern int num_registered_fb;
 
+static inline void __fb_pad_aligned_buffer(u8 *dst, u32 d_pitch,
+					   u8 *src, u32 s_pitch, u32 height)
+{
+	int i, j;
+
+	d_pitch -= s_pitch;
+
+	for (i = height; i--; ) {
+		/* s_pitch is a few bytes at the most, memcpy is suboptimal */
+		for (j = 0; j < s_pitch; j++)
+			*dst++ = *src++;
+		dst += d_pitch;
+	}
+}
+
 /* drivers/video/fbsysfs.c */
 extern struct fb_info *framebuffer_alloc(size_t size, struct device *dev);
 extern void framebuffer_release(struct fb_info *info);
@@ -857,8 +878,11 @@ extern int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var,
 extern int fb_validate_mode(const struct fb_var_screeninfo *var,
 			    struct fb_info *info);
 extern int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var);
-extern void fb_edid_to_monspecs(unsigned char *edid, struct fb_monspecs *specs);
+extern const unsigned char *fb_firmware_edid(struct device *device);
+extern void fb_edid_to_monspecs(unsigned char *edid,
+				struct fb_monspecs *specs);
 extern void fb_destroy_modedb(struct fb_videomode *modedb);
+extern int fb_find_mode_cvt(struct fb_videomode *mode, int margins, int rb);
 
 /* drivers/video/modedb.c */
 #define VESA_MODEDB_SIZE 34

sound/arm/Makefile

@@ -2,14 +2,17 @@
 # Makefile for ALSA
 #
 
+obj-$(CONFIG_SND_SA11XX_UDA1341) += snd-sa11xx-uda1341.o 
 snd-sa11xx-uda1341-objs		:= sa11xx-uda1341.o
-snd-aaci-objs			:= aaci.o devdma.o
-snd-pxa2xx-pcm-objs := pxa2xx-pcm.o
-snd-pxa2xx-ac97-objs := pxa2xx-ac97.o
-snd-omap-aic23-objs := omap-aic23.o omap-alsa-dma.o omap-alsa-mixer.o
 
-obj-$(CONFIG_SND_SA11XX_UDA1341) += snd-sa11xx-uda1341.o 
 obj-$(CONFIG_SND_ARMAACI)	+= snd-aaci.o
+snd-aaci-objs			:= aaci.o devdma.o
+
 obj-$(CONFIG_SND_PXA2XX_PCM)	+= snd-pxa2xx-pcm.o
+snd-pxa2xx-pcm-objs		:= pxa2xx-pcm.o
+
 obj-$(CONFIG_SND_PXA2XX_AC97)	+= snd-pxa2xx-ac97.o
+snd-pxa2xx-ac97-objs		:= pxa2xx-ac97.o
+
 obj-$(CONFIG_SND_OMAP_AIC23) += snd-omap-aic23.o
+snd-omap-aic23-objs := omap-aic23.o omap-alsa-dma.o omap-alsa-mixer.o