usb: gadget Kconfig cleanup

This reorders the list of USB peripheral controller drivers so it's
more common for the initial (default) value to be relevant:  put the
SOC integrated silicon up front, discrete stuff last.  Alphabetize.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/gadget/Kconfig

@@ -85,6 +85,13 @@ config	USB_GADGET_SELECTED
 #
 # USB Peripheral Controller Support
 #
+# The order here is alphabetical, except that integrated controllers go
+# before discrete ones so they will be the initial/default value:
+#   - integrated/SOC controllers first
+#   - licensed IP used in both SOC and discrete versions
+#   - discrete ones (including all PCI-only controllers)
+#   - debug/dummy gadget+hcd is last.
+#
 choice
 	prompt "USB Peripheral Controller"
 	depends on USB_GADGET
@@ -94,26 +101,27 @@ choice
 	   Many controller drivers are platform-specific; these
 	   often need board-specific hooks.
 
-config USB_GADGET_AMD5536UDC
-	boolean "AMD5536 UDC"
-	depends on PCI
-	select USB_GADGET_DUALSPEED
+#
+# Integrated controllers
+#
+
+config USB_GADGET_AT91
+	boolean "Atmel AT91 USB Device Port"
+	depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9
+	select USB_GADGET_SELECTED
 	help
-	   The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.
-	   It is a USB Highspeed DMA capable USB device controller. Beside ep0
-	   it provides 4 IN and 4 OUT endpoints (bulk or interrupt type).
-	   The UDC port supports OTG operation, and may be used as a host port
-	   if it's not being used to implement peripheral or OTG roles.
+	   Many Atmel AT91 processors (such as the AT91RM2000) have a
+	   full speed USB Device Port with support for five configurable
+	   endpoints (plus endpoint zero).
 
 	   Say "y" to link the driver statically, or "m" to build a
-	   dynamically linked module called "amd5536udc" and force all
+	   dynamically linked module called "at91_udc" and force all
 	   gadget drivers to also be dynamically linked.
 
-config USB_AMD5536UDC
+config USB_AT91
 	tristate
-	depends on USB_GADGET_AMD5536UDC
+	depends on USB_GADGET_AT91
 	default USB_GADGET
-	select USB_GADGET_SELECTED
 
 config USB_GADGET_ATMEL_USBA
 	boolean "Atmel USBA"
@@ -150,28 +158,50 @@ config USB_FSL_USB2
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
-config USB_GADGET_NET2280
-	boolean "NetChip 228x"
-	depends on PCI
-	select USB_GADGET_DUALSPEED
+config USB_GADGET_LH7A40X
+	boolean "LH7A40X"
+	depends on ARCH_LH7A40X
 	help
-	   NetChip 2280 / 2282 is a PCI based USB peripheral controller which
-	   supports both full and high speed USB 2.0 data transfers.  
-	   
-	   It has six configurable endpoints, as well as endpoint zero
-	   (for control transfers) and several endpoints with dedicated
-	   functions.
+	   This driver provides USB Device Controller driver for LH7A40x
+
+config USB_LH7A40X
+	tristate
+	depends on USB_GADGET_LH7A40X
+	default USB_GADGET
+	select USB_GADGET_SELECTED
+
+config USB_GADGET_OMAP
+	boolean "OMAP USB Device Controller"
+	depends on ARCH_OMAP
+	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
+	help
+	   Many Texas Instruments OMAP processors have flexible full
+	   speed USB device controllers, with support for up to 30
+	   endpoints (plus endpoint zero).  This driver supports the
+	   controller in the OMAP 1611, and should work with controllers
+	   in other OMAP processors too, given minor tweaks.
 
 	   Say "y" to link the driver statically, or "m" to build a
-	   dynamically linked module called "net2280" and force all
+	   dynamically linked module called "omap_udc" and force all
 	   gadget drivers to also be dynamically linked.
 
-config USB_NET2280
+config USB_OMAP
 	tristate
-	depends on USB_GADGET_NET2280
+	depends on USB_GADGET_OMAP
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
+config USB_OTG
+	boolean "OTG Support"
+	depends on USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD
+	help
+	   The most notable feature of USB OTG is support for a
+	   "Dual-Role" device, which can act as either a device
+	   or a host.  The initial role choice can be changed
+	   later, when two dual-role devices talk to each other.
+
+	   Select this only if your OMAP board has a Mini-AB connector.
+
 config USB_GADGET_PXA25X
 	boolean "PXA 25x or IXP 4xx"
 	depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
@@ -203,34 +233,6 @@ config USB_PXA25X_SMALL
 	default y if USB_ETH
 	default y if USB_G_SERIAL
 
-config USB_GADGET_M66592
-	boolean "Renesas M66592 USB Peripheral Controller"
-	select USB_GADGET_DUALSPEED
-	help
-	   M66592 is a discrete USB peripheral controller chip that
-	   supports both full and high speed USB 2.0 data transfers.
-	   It has seven configurable endpoints, and endpoint zero.
-
-	   Say "y" to link the driver statically, or "m" to build a
-	   dynamically linked module called "m66592_udc" and force all
-	   gadget drivers to also be dynamically linked.
-
-config USB_M66592
-	tristate
-	depends on USB_GADGET_M66592
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
-config SUPERH_BUILT_IN_M66592
-	boolean "Enable SuperH built-in USB like the M66592"
-	depends on USB_GADGET_M66592 && CPU_SUBTYPE_SH7722
-	help
-	   SH7722 has USB like the M66592.
-
-	   The transfer rate is very slow when use "Ethernet Gadget".
-	   However, this problem is improved if change a value of
-	   NET_IP_ALIGN to 4.
-
 config USB_GADGET_PXA27X
 	boolean "PXA 27x"
 	depends on ARCH_PXA && PXA27x
@@ -251,40 +253,32 @@ config USB_PXA27X
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
-config USB_GADGET_GOKU
-	boolean "Toshiba TC86C001 'Goku-S'"
-	depends on PCI
+config USB_GADGET_S3C2410
+	boolean "S3C2410 USB Device Controller"
+	depends on ARCH_S3C2410
 	help
-	   The Toshiba TC86C001 is a PCI device which includes controllers
-	   for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).
-	   
-	   The device controller has three configurable (bulk or interrupt)
-	   endpoints, plus endpoint zero (for control transfers).
+	  Samsung's S3C2410 is an ARM-4 processor with an integrated
+	  full speed USB 1.1 device controller.  It has 4 configurable
+	  endpoints, as well as endpoint zero (for control transfers).
 
-	   Say "y" to link the driver statically, or "m" to build a
-	   dynamically linked module called "goku_udc" and to force all
-	   gadget drivers to also be dynamically linked.
+	  This driver has been tested on the S3C2410, S3C2412, and
+	  S3C2440 processors.
 
-config USB_GOKU
+config USB_S3C2410
 	tristate
-	depends on USB_GADGET_GOKU
+	depends on USB_GADGET_S3C2410
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
+config USB_S3C2410_DEBUG
+	boolean "S3C2410 udc debug messages"
+	depends on USB_GADGET_S3C2410
 
-config USB_GADGET_LH7A40X
-	boolean "LH7A40X"
-	depends on ARCH_LH7A40X
-	help
-    This driver provides USB Device Controller driver for LH7A40x
-
-config USB_LH7A40X
-	tristate
-	depends on USB_GADGET_LH7A40X
-	default USB_GADGET
-	select USB_GADGET_SELECTED
+#
+# Controllers available in both integrated and discrete versions
+#
 
-# built in ../musb along with host support
+# musb builds in ../musb along with host support
 config USB_GADGET_MUSB_HDRC
 	boolean "Inventra HDRC USB Peripheral (TI, ...)"
 	depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG)
@@ -294,76 +288,105 @@ config USB_GADGET_MUSB_HDRC
 	  This OTG-capable silicon IP is used in dual designs including
 	  the TI DaVinci, OMAP 243x, OMAP 343x, and TUSB 6010.
 
-config USB_GADGET_OMAP
-	boolean "OMAP USB Device Controller"
-	depends on ARCH_OMAP
-	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
+config USB_GADGET_M66592
+	boolean "Renesas M66592 USB Peripheral Controller"
+	select USB_GADGET_DUALSPEED
 	help
-	   Many Texas Instruments OMAP processors have flexible full
-	   speed USB device controllers, with support for up to 30
-	   endpoints (plus endpoint zero).  This driver supports the
-	   controller in the OMAP 1611, and should work with controllers
-	   in other OMAP processors too, given minor tweaks.
+	   M66592 is a discrete USB peripheral controller chip that
+	   supports both full and high speed USB 2.0 data transfers.
+	   It has seven configurable endpoints, and endpoint zero.
 
 	   Say "y" to link the driver statically, or "m" to build a
-	   dynamically linked module called "omap_udc" and force all
+	   dynamically linked module called "m66592_udc" and force all
 	   gadget drivers to also be dynamically linked.
 
-config USB_OMAP
+config USB_M66592
 	tristate
-	depends on USB_GADGET_OMAP
+	depends on USB_GADGET_M66592
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
-config USB_OTG
-	boolean "OTG Support"
-	depends on USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD
+config SUPERH_BUILT_IN_M66592
+	boolean "Enable SuperH built-in USB like the M66592"
+	depends on USB_GADGET_M66592 && CPU_SUBTYPE_SH7722
 	help
-	   The most notable feature of USB OTG is support for a
-	   "Dual-Role" device, which can act as either a device
-	   or a host.  The initial role choice can be changed
-	   later, when two dual-role devices talk to each other.
+	   SH7722 has USB like the M66592.
 
-	   Select this only if your OMAP board has a Mini-AB connector.
+	   The transfer rate is very slow when use "Ethernet Gadget".
+	   However, this problem is improved if change a value of
+	   NET_IP_ALIGN to 4.
 
-config USB_GADGET_S3C2410
-	boolean "S3C2410 USB Device Controller"
-	depends on ARCH_S3C2410
+#
+# Controllers available only in discrete form (and all PCI controllers)
+#
+
+config USB_GADGET_AMD5536UDC
+	boolean "AMD5536 UDC"
+	depends on PCI
+	select USB_GADGET_DUALSPEED
 	help
-	  Samsung's S3C2410 is an ARM-4 processor with an integrated
-	  full speed USB 1.1 device controller.  It has 4 configurable
-	  endpoints, as well as endpoint zero (for control transfers).
+	   The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.
+	   It is a USB Highspeed DMA capable USB device controller. Beside ep0
+	   it provides 4 IN and 4 OUT endpoints (bulk or interrupt type).
+	   The UDC port supports OTG operation, and may be used as a host port
+	   if it's not being used to implement peripheral or OTG roles.
 
-	  This driver has been tested on the S3C2410, S3C2412, and
-	  S3C2440 processors.
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "amd5536udc" and force all
+	   gadget drivers to also be dynamically linked.
 
-config USB_S3C2410
+config USB_AMD5536UDC
 	tristate
-	depends on USB_GADGET_S3C2410
+	depends on USB_GADGET_AMD5536UDC
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
-config USB_S3C2410_DEBUG
-	boolean "S3C2410 udc debug messages"
-	depends on USB_GADGET_S3C2410
+config USB_GADGET_NET2280
+	boolean "NetChip 228x"
+	depends on PCI
+	select USB_GADGET_DUALSPEED
+	help
+	   NetChip 2280 / 2282 is a PCI based USB peripheral controller which
+	   supports both full and high speed USB 2.0 data transfers.
 
-config USB_GADGET_AT91
-	boolean "AT91 USB Device Port"
-	depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9
+	   It has six configurable endpoints, as well as endpoint zero
+	   (for control transfers) and several endpoints with dedicated
+	   functions.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "net2280" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_NET2280
+	tristate
+	depends on USB_GADGET_NET2280
+	default USB_GADGET
 	select USB_GADGET_SELECTED
+
+config USB_GADGET_GOKU
+	boolean "Toshiba TC86C001 'Goku-S'"
+	depends on PCI
 	help
-	   Many Atmel AT91 processors (such as the AT91RM2000) have a
-	   full speed USB Device Port with support for five configurable
-	   endpoints (plus endpoint zero).
+	   The Toshiba TC86C001 is a PCI device which includes controllers
+	   for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).
+
+	   The device controller has three configurable (bulk or interrupt)
+	   endpoints, plus endpoint zero (for control transfers).
 
 	   Say "y" to link the driver statically, or "m" to build a
-	   dynamically linked module called "at91_udc" and force all
+	   dynamically linked module called "goku_udc" and to force all
 	   gadget drivers to also be dynamically linked.
 
-config USB_AT91
+config USB_GOKU
 	tristate
-	depends on USB_GADGET_AT91
+	depends on USB_GADGET_GOKU
 	default USB_GADGET
+	select USB_GADGET_SELECTED
+
+
+#
+# LAST -- dummy/emulated controller
+#
 
 config USB_GADGET_DUMMY_HCD
 	boolean "Dummy HCD (DEVELOPMENT)"