Misc clean-up for 3430-sdp to prepare for mainline

Misc clean-up for 3430-sdp to prepare for mainline
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/board-3430sdp.c

@@ -17,9 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/input.h>
-#include <linux/workqueue.h>
 #include <linux/err.h>
-#include <linux/clk.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/i2c/twl4030.h>
@@ -47,11 +45,19 @@
 
 #define CONFIG_DISABLE_HFCLK 1
 
+#define SDP3430_ETHR_START		DEBUG_BASE
+#define SDP3430_ETHR_GPIO_IRQ_SDPV1	29
+#define SDP3430_ETHR_GPIO_IRQ_SDPV2	6
 #define SDP3430_SMC91X_CS		3
 
+#define SDP3430_TS_GPIO_IRQ_SDPV1	3
+#define SDP3430_TS_GPIO_IRQ_SDPV2	2
+
 #define ENABLE_VAUX3_DEDICATED	0x03
 #define ENABLE_VAUX3_DEV_GRP	0x20
 
+#define ENABLE_VAUX3_DEDICATED	0x03
+#define ENABLE_VAUX3_DEV_GRP	0x20
 
 #define TWL4030_MSECURE_GPIO 22
 
@@ -115,7 +121,7 @@ static struct twl4030_keypad_data sdp3430_kp_data = {
 	.rep		= 1,
 };
 
-static int ts_gpio;
+static int ts_gpio;	/* Needed for ads7846_get_pendown_state */
 
 static int __init msecure_init(void)
 {
@@ -262,9 +268,9 @@ static inline void __init sdp3430_init_smc91x(void)
 	udelay(100);
 
 	if (omap_rev() > OMAP3430_REV_ES1_0)
-		eth_gpio = OMAP34XX_ETHR_GPIO_IRQ_SDPV2;
+		eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV2;
 	else
-		eth_gpio = OMAP34XX_ETHR_GPIO_IRQ_SDPV1;
+		eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV1;
 
 	sdp3430_smc91x_resources[1].start = gpio_to_irq(eth_gpio);
 
@@ -633,9 +639,9 @@ static void __init omap_3430sdp_init(void)
 	omap_board_config = sdp3430_config;
 	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
 	if (omap_rev() > OMAP3430_REV_ES1_0)
-		ts_gpio = OMAP34XX_TS_GPIO_IRQ_SDPV2;
+		ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
 	else
-		ts_gpio = OMAP34XX_TS_GPIO_IRQ_SDPV1;
+		ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV1;
 	sdp3430_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
 	spi_register_board_info(sdp3430_spi_board_info,
 				ARRAY_SIZE(sdp3430_spi_board_info));

arch/arm/plat-omap/include/mach/board-3430sdp.h

@@ -33,20 +33,6 @@ extern void sdp3430_usb_init(void);
 extern void sdp3430_flash_init(void);
 extern void twl4030_bci_battery_init(void);
 
-#define DEBUG_BASE			0x08000000  /* debug board */
-
-/* Placeholder for 3430SDP specific defines */
-
-#define OMAP34XX_ETHR_START		DEBUG_BASE
-#define OMAP34XX_ETHR_GPIO_IRQ_SDPV1	29
-#define OMAP34XX_ETHR_GPIO_IRQ_SDPV2	6
-
-/*
- * GPIO used for TSC2046, TI's Touchscreen controller
- */
-#define OMAP34XX_TS_GPIO_IRQ_SDPV1     3
-#define OMAP34XX_TS_GPIO_IRQ_SDPV2     2
-
 /* NAND */
 /* IMPORTANT NOTE ON MAPPING
  * 3430SDP - 34XX