Commit 980f9235 authored by Greg Ungerer's avatar Greg Ungerer

m68knommu: clean up ColdFire 528x interrupt setup

With the common intc-2 interrupt controller code in place the ColdFire
528x family startup code can be greatly simplified. Remove all the
interrupt masking code, and the per-device interrupt config here.
Signed-off-by: default avatarGreg Ungerer <gerg@uclinux.org>
parent 1b718c71
...@@ -3,8 +3,8 @@ ...@@ -3,8 +3,8 @@
/* /*
* linux/arch/m68knommu/platform/528x/config.c * linux/arch/m68knommu/platform/528x/config.c
* *
* Sub-architcture dependant initialization code for the Motorola * Sub-architcture dependant initialization code for the Freescale
* 5280 and 5282 CPUs. * 5280, 5281 and 5282 CPUs.
* *
* Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com) * Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
* Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com) * Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
...@@ -15,20 +15,13 @@ ...@@ -15,20 +15,13 @@
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/param.h> #include <linux/param.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/io.h> #include <linux/io.h>
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/coldfire.h> #include <asm/coldfire.h>
#include <asm/mcfsim.h> #include <asm/mcfsim.h>
#include <asm/mcfuart.h> #include <asm/mcfuart.h>
#ifdef CONFIG_MTD_PARTITIONS
#include <linux/mtd/partitions.h>
#endif
/***************************************************************************/ /***************************************************************************/
static struct mcf_platform_uart m528x_uart_platform[] = { static struct mcf_platform_uart m528x_uart_platform[] = {
...@@ -91,23 +84,13 @@ static struct platform_device *m528x_devices[] __initdata = { ...@@ -91,23 +84,13 @@ static struct platform_device *m528x_devices[] __initdata = {
/***************************************************************************/ /***************************************************************************/
#define INTC0 (MCF_MBAR + MCFICM_INTC0)
static void __init m528x_uart_init_line(int line, int irq) static void __init m528x_uart_init_line(int line, int irq)
{ {
u8 port; u8 port;
u32 imr;
if ((line < 0) || (line > 2)) if ((line < 0) || (line > 2))
return; return;
/* level 6, line based priority */
writeb(0x30+line, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line);
imr = readl(INTC0 + MCFINTC_IMRL);
imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
writel(imr, INTC0 + MCFINTC_IMRL);
/* make sure PUAPAR is set for UART0 and UART1 */ /* make sure PUAPAR is set for UART0 and UART1 */
if (line < 2) { if (line < 2) {
port = readb(MCF_MBAR + MCF5282_GPIO_PUAPAR); port = readb(MCF_MBAR + MCF5282_GPIO_PUAPAR);
...@@ -129,21 +112,8 @@ static void __init m528x_uarts_init(void) ...@@ -129,21 +112,8 @@ static void __init m528x_uarts_init(void)
static void __init m528x_fec_init(void) static void __init m528x_fec_init(void)
{ {
u32 imr;
u16 v16; u16 v16;
/* Unmask FEC interrupts at ColdFire interrupt controller */
writeb(0x28, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 23);
writeb(0x27, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 27);
writeb(0x26, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 29);
imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
imr &= ~0xf;
writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
imr &= ~0xff800001;
writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
/* Set multi-function pins to ethernet mode for fec0 */ /* Set multi-function pins to ethernet mode for fec0 */
v16 = readw(MCF_IPSBAR + 0x100056); v16 = readw(MCF_IPSBAR + 0x100056);
writew(v16 | 0xf00, MCF_IPSBAR + 0x100056); writew(v16 | 0xf00, MCF_IPSBAR + 0x100056);
...@@ -152,21 +122,6 @@ static void __init m528x_fec_init(void) ...@@ -152,21 +122,6 @@ static void __init m528x_fec_init(void)
/***************************************************************************/ /***************************************************************************/
void mcf_disableall(void)
{
*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH)) = 0xffffffff;
*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL)) = 0xffffffff;
}
/***************************************************************************/
void mcf_autovector(unsigned int vec)
{
/* Everything is auto-vectored on the 5272 */
}
/***************************************************************************/
static void m528x_cpu_reset(void) static void m528x_cpu_reset(void)
{ {
local_irq_disable(); local_irq_disable();
...@@ -204,8 +159,6 @@ void wildfiremod_halt(void) ...@@ -204,8 +159,6 @@ void wildfiremod_halt(void)
void __init config_BSP(char *commandp, int size) void __init config_BSP(char *commandp, int size)
{ {
mcf_disableall();
#ifdef CONFIG_WILDFIRE #ifdef CONFIG_WILDFIRE
mach_halt = wildfire_halt; mach_halt = wildfire_halt;
#endif #endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment