Commit 8cdfb29c authored by Jeff Garzik's avatar Jeff Garzik

libata/IDE: remove combined mode quirk

Both old-IDE and libata should be able handle all controllers and
devices found using normal resource reservation methods.

This eliminates the awful, low-performing split-driver configuration
where old-IDE drove the PATA portion of a PCI device, in PIO-only mode,
and libata drove the SATA portion of the /same/ PCI device, in DMA mode.
Typically vendors would ship SATA hard drive / PATA optical
configuration, which would lend itself to slow (PIO-only) CD-ROM
performance.

For Intel users running in combined mode, it is now wholly dependent on
your driver choice (potentially link order, if you compile both drivers
in) whether old-IDE or libata will drive your hardware.

In either case, you will get full performance from both SATA and PATA
ports now, without having to pass a kernel command line parameter.
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent e424675f
...@@ -692,7 +692,6 @@ CONFIG_SATA_SIL=y ...@@ -692,7 +692,6 @@ CONFIG_SATA_SIL=y
CONFIG_SATA_VIA=y CONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not set # CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set # CONFIG_SATA_INIC162X is not set
CONFIG_SATA_INTEL_COMBINED=y
CONFIG_SATA_ACPI=y CONFIG_SATA_ACPI=y
# CONFIG_PATA_ALI is not set # CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set # CONFIG_PATA_AMD is not set
......
...@@ -435,7 +435,6 @@ CONFIG_SCSI_SATA_SIL=m ...@@ -435,7 +435,6 @@ CONFIG_SCSI_SATA_SIL=m
# CONFIG_SCSI_SATA_ULI is not set # CONFIG_SCSI_SATA_ULI is not set
CONFIG_SCSI_SATA_VIA=m CONFIG_SCSI_SATA_VIA=m
# CONFIG_SCSI_SATA_VITESSE is not set # CONFIG_SCSI_SATA_VITESSE is not set
CONFIG_SCSI_SATA_INTEL_COMBINED=y
# CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set # CONFIG_SCSI_IPS is not set
......
...@@ -631,7 +631,6 @@ CONFIG_SATA_SIL=y ...@@ -631,7 +631,6 @@ CONFIG_SATA_SIL=y
CONFIG_SATA_VIA=y CONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not set # CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set # CONFIG_SATA_INIC162X is not set
CONFIG_SATA_INTEL_COMBINED=y
CONFIG_SATA_ACPI=y CONFIG_SATA_ACPI=y
# CONFIG_PATA_ALI is not set # CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set # CONFIG_PATA_AMD is not set
......
...@@ -156,11 +156,6 @@ config SATA_INIC162X ...@@ -156,11 +156,6 @@ config SATA_INIC162X
help help
This option enables support for Initio 162x Serial ATA. This option enables support for Initio 162x Serial ATA.
config SATA_INTEL_COMBINED
bool
depends on IDE=y && !BLK_DEV_IDE_SATA && (SATA_AHCI || ATA_PIIX)
default y
config SATA_ACPI config SATA_ACPI
bool bool
depends on ACPI && PCI depends on ACPI && PCI
......
...@@ -779,40 +779,16 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, ...@@ -779,40 +779,16 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
/* Deal with combined mode hack. This side of the logic all /* Deal with combined mode hack. This side of the logic all
goes away once the combined mode hack is killed in 2.6.21 */ goes away once the combined mode hack is killed in 2.6.21 */
if (!devm_request_region(dev, ATA_PRIMARY_CMD, 8, "libata")) { if (!devm_request_region(dev, ATA_PRIMARY_CMD, 8, "libata")) {
struct resource *conflict, res;
res.start = ATA_PRIMARY_CMD;
res.end = ATA_PRIMARY_CMD + 8 - 1;
conflict = ____request_resource(&ioport_resource, &res);
while (conflict->child)
conflict = ____request_resource(conflict, &res);
if (!strcmp(conflict->name, "libata"))
legacy_mode |= ATA_PORT_PRIMARY;
else {
pcim_pin_device(pdev); pcim_pin_device(pdev);
printk(KERN_WARNING "ata: 0x%0X IDE port busy\n" \ printk(KERN_WARNING "ata: 0x%0X IDE port busy\n",
"ata: conflict with %s\n", ATA_PRIMARY_CMD);
ATA_PRIMARY_CMD,
conflict->name);
}
} else } else
legacy_mode |= ATA_PORT_PRIMARY; legacy_mode |= ATA_PORT_PRIMARY;
if (!devm_request_region(dev, ATA_SECONDARY_CMD, 8, "libata")) { if (!devm_request_region(dev, ATA_SECONDARY_CMD, 8, "libata")) {
struct resource *conflict, res;
res.start = ATA_SECONDARY_CMD;
res.end = ATA_SECONDARY_CMD + 8 - 1;
conflict = ____request_resource(&ioport_resource, &res);
while (conflict->child)
conflict = ____request_resource(conflict, &res);
if (!strcmp(conflict->name, "libata"))
legacy_mode |= ATA_PORT_SECONDARY;
else {
pcim_pin_device(pdev); pcim_pin_device(pdev);
printk(KERN_WARNING "ata: 0x%X IDE port busy\n" \ printk(KERN_WARNING "ata: 0x%X IDE port busy\n",
"ata: conflict with %s\n", ATA_SECONDARY_CMD);
ATA_SECONDARY_CMD,
conflict->name);
}
} else } else
legacy_mode |= ATA_PORT_SECONDARY; legacy_mode |= ATA_PORT_SECONDARY;
......
...@@ -1303,119 +1303,6 @@ static void __init quirk_alder_ioapic(struct pci_dev *pdev) ...@@ -1303,119 +1303,6 @@ static void __init quirk_alder_ioapic(struct pci_dev *pdev)
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic );
#endif #endif
enum ide_combined_type { COMBINED = 0, IDE = 1, LIBATA = 2 };
/* Defaults to combined */
static enum ide_combined_type combined_mode;
static int __init combined_setup(char *str)
{
if (!strncmp(str, "ide", 3))
combined_mode = IDE;
else if (!strncmp(str, "libata", 6))
combined_mode = LIBATA;
else /* "combined" or anything else defaults to old behavior */
combined_mode = COMBINED;
return 1;
}
__setup("combined_mode=", combined_setup);
#ifdef CONFIG_SATA_INTEL_COMBINED
static void __devinit quirk_intel_ide_combined(struct pci_dev *pdev)
{
u8 prog, comb, tmp;
int ich = 0;
/*
* Narrow down to Intel SATA PCI devices.
*/
switch (pdev->device) {
/* PCI ids taken from drivers/scsi/ata_piix.c */
case 0x24d1:
case 0x24df:
case 0x25a3:
case 0x25b0:
ich = 5;
break;
case 0x2651:
case 0x2652:
case 0x2653:
case 0x2680: /* ESB2 */
ich = 6;
break;
case 0x27c0:
case 0x27c4:
ich = 7;
break;
case 0x2828: /* ICH8M */
ich = 8;
break;
default:
/* we do not handle this PCI device */
return;
}
/*
* Read combined mode register.
*/
pci_read_config_byte(pdev, 0x90, &tmp); /* combined mode reg */
if (ich == 5) {
tmp &= 0x6; /* interesting bits 2:1, PATA primary/secondary */
if (tmp == 0x4) /* bits 10x */
comb = (1 << 0); /* SATA port 0, PATA port 1 */
else if (tmp == 0x6) /* bits 11x */
comb = (1 << 2); /* PATA port 0, SATA port 1 */
else
return; /* not in combined mode */
} else {
WARN_ON((ich != 6) && (ich != 7) && (ich != 8));
tmp &= 0x3; /* interesting bits 1:0 */
if (tmp & (1 << 0))
comb = (1 << 2); /* PATA port 0, SATA port 1 */
else if (tmp & (1 << 1))
comb = (1 << 0); /* SATA port 0, PATA port 1 */
else
return; /* not in combined mode */
}
/*
* Read programming interface register.
* (Tells us if it's legacy or native mode)
*/
pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
/* if SATA port is in native mode, we're ok. */
if (prog & comb)
return;
/* Don't reserve any so the IDE driver can get them (but only if
* combined_mode=ide).
*/
if (combined_mode == IDE)
return;
/* Grab them both for libata if combined_mode=libata. */
if (combined_mode == LIBATA) {
request_region(0x1f0, 8, "libata"); /* port 0 */
request_region(0x170, 8, "libata"); /* port 1 */
return;
}
/* SATA port is in legacy mode. Reserve port so that
* IDE driver does not attempt to use it. If request_region
* fails, it will be obvious at boot time, so we don't bother
* checking return values.
*/
if (comb == (1 << 0))
request_region(0x1f0, 8, "libata"); /* port 0 */
else
request_region(0x170, 8, "libata"); /* port 1 */
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_intel_ide_combined );
#endif /* CONFIG_SATA_INTEL_COMBINED */
int pcie_mch_quirk; int pcie_mch_quirk;
EXPORT_SYMBOL(pcie_mch_quirk); EXPORT_SYMBOL(pcie_mch_quirk);
......
...@@ -99,7 +99,6 @@ extern struct resource ioport_resource; ...@@ -99,7 +99,6 @@ extern struct resource ioport_resource;
extern struct resource iomem_resource; extern struct resource iomem_resource;
extern int request_resource(struct resource *root, struct resource *new); extern int request_resource(struct resource *root, struct resource *new);
extern struct resource * ____request_resource(struct resource *root, struct resource *new);
extern int release_resource(struct resource *new); extern int release_resource(struct resource *new);
extern int insert_resource(struct resource *parent, struct resource *new); extern int insert_resource(struct resource *parent, struct resource *new);
extern int allocate_resource(struct resource *root, struct resource *new, extern int allocate_resource(struct resource *root, struct resource *new,
......
...@@ -212,27 +212,6 @@ int request_resource(struct resource *root, struct resource *new) ...@@ -212,27 +212,6 @@ int request_resource(struct resource *root, struct resource *new)
EXPORT_SYMBOL(request_resource); EXPORT_SYMBOL(request_resource);
/**
* ____request_resource - reserve a resource, with resource conflict returned
* @root: root resource descriptor
* @new: resource descriptor desired by caller
*
* Returns:
* On success, NULL is returned.
* On error, a pointer to the conflicting resource is returned.
*/
struct resource *____request_resource(struct resource *root, struct resource *new)
{
struct resource *conflict;
write_lock(&resource_lock);
conflict = __request_resource(root, new);
write_unlock(&resource_lock);
return conflict;
}
EXPORT_SYMBOL(____request_resource);
/** /**
* release_resource - release a previously reserved resource * release_resource - release a previously reserved resource
* @old: resource pointer * @old: resource pointer
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment