Merge branch 'quilt/usb.current'

drivers/usb/class/cdc-acm.c

@@ -59,6 +59,7 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/tty.h>
+#include <linux/serial.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
 #include <linux/module.h>
@@ -609,6 +610,7 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 	acm->throttle = 0;
 
 	tasklet_schedule(&acm->urb_task);
+	set_bit(ASYNCB_INITIALIZED, &acm->port.flags);
 	rv = tty_port_block_til_ready(&acm->port, tty, filp);
 done:
 	mutex_unlock(&acm->mutex);

drivers/usb/class/cdc-wdm.c

@@ -313,8 +313,13 @@ static ssize_t wdm_write
 	r = usb_autopm_get_interface(desc->intf);
 	if (r < 0)
 		goto outnp;
+
+	if (!file->f_flags && O_NONBLOCK)
 		r = wait_event_interruptible(desc->wait, !test_bit(WDM_IN_USE,
 								&desc->flags));
+	else
+		if (test_bit(WDM_IN_USE, &desc->flags))
+			r = -EAGAIN;
 	if (r < 0)
 		goto out;
 
@@ -377,7 +382,7 @@ outnl:
 static ssize_t wdm_read
 (struct file *file, char __user *buffer, size_t count, loff_t *ppos)
 {
-	int rv, cntr;
+	int rv, cntr = 0;
 	int i = 0;
 	struct wdm_device *desc = file->private_data;
 
@@ -389,10 +394,23 @@ static ssize_t wdm_read
 	if (desc->length == 0) {
 		desc->read = 0;
 retry:
+		if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+			rv = -ENODEV;
+			goto err;
+		}
 		i++;
+		if (file->f_flags & O_NONBLOCK) {
+			if (!test_bit(WDM_READ, &desc->flags)) {
+				rv = cntr ? cntr : -EAGAIN;
+				goto err;
+			}
+			rv = 0;
+		} else {
 			rv = wait_event_interruptible(desc->wait,
 				test_bit(WDM_READ, &desc->flags));
+		}
 
+		/* may have happened while we slept */
 		if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
 			rv = -ENODEV;
 			goto err;
@@ -448,7 +466,7 @@ retry:
 
 err:
 	mutex_unlock(&desc->rlock);
-	if (rv < 0)
+	if (rv < 0 && rv != -EAGAIN)
 		dev_err(&desc->intf->dev, "wdm_read: exit error\n");
 	return rv;
 }

drivers/usb/core/config.c

@@ -105,7 +105,7 @@ static int usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
 	ep->ss_ep_comp->extralen = i;
 	buffer += i;
 	size -= i;
-	retval = buffer - buffer_start + i;
+	retval = buffer - buffer_start;
 	if (num_skipped > 0)
 		dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
 				num_skipped, plural(num_skipped),

drivers/usb/host/sl811-hcd.c

@@ -719,8 +719,12 @@ retry:
 		/* port status seems weird until after reset, so
 		 * force the reset and make khubd clean up later.
 		 */
-		sl811->port1 |= (1 << USB_PORT_FEAT_C_CONNECTION)
-				| (1 << USB_PORT_FEAT_CONNECTION);
+		if (sl811->stat_insrmv & 1)
+			sl811->port1 |= 1 << USB_PORT_FEAT_CONNECTION;
+		else
+			sl811->port1 &= ~(1 << USB_PORT_FEAT_CONNECTION);
+
+		sl811->port1 |= 1 << USB_PORT_FEAT_C_CONNECTION;
 
 	} else if (irqstat & SL11H_INTMASK_RD) {
 		if (sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND)) {

drivers/usb/host/xhci-dbg.c

@@ -413,7 +413,8 @@ void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx)
 	int i;
 
 	struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx);
-	dma_addr_t dma = ctx->dma + ((unsigned long)slot_ctx - (unsigned long)ctx);
+	dma_addr_t dma = ctx->dma +
+		((unsigned long)slot_ctx - (unsigned long)ctx->bytes);
 	int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
 
 	xhci_dbg(xhci, "Slot Context:\n");
@@ -459,7 +460,7 @@ void xhci_dbg_ep_ctx(struct xhci_hcd *xhci,
 	for (i = 0; i < last_ep_ctx; ++i) {
 		struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, ctx, i);
 		dma_addr_t dma = ctx->dma +
-			((unsigned long)ep_ctx - (unsigned long)ctx);
+			((unsigned long)ep_ctx - (unsigned long)ctx->bytes);
 
 		xhci_dbg(xhci, "Endpoint %02d Context:\n", i);
 		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info\n",

drivers/usb/host/xhci-mem.c

@@ -94,6 +94,9 @@ static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev,
 		val = prev->trbs[TRBS_PER_SEGMENT-1].link.control;
 		val &= ~TRB_TYPE_BITMASK;
 		val |= TRB_TYPE(TRB_LINK);
+		/* Always set the chain bit with 0.95 hardware */
+		if (xhci_link_trb_quirk(xhci))
+			val |= TRB_CHAIN;
 		prev->trbs[TRBS_PER_SEGMENT-1].link.control = val;
 	}
 	xhci_dbg(xhci, "Linking segment 0x%llx to segment 0x%llx (DMA)\n",
@@ -398,15 +401,28 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	/* Step 5 */
 	ep0_ctx->ep_info2 = EP_TYPE(CTRL_EP);
 	/*
-	 * See section 4.3 bullet 6:
-	 * The default Max Packet size for ep0 is "8 bytes for a USB2
-	 * LS/FS/HS device or 512 bytes for a USB3 SS device"
 	 * XXX: Not sure about wireless USB devices.
 	 */
-	if (udev->speed == USB_SPEED_SUPER)
+	switch (udev->speed) {
+	case USB_SPEED_SUPER:
 		ep0_ctx->ep_info2 |= MAX_PACKET(512);
-	else
+		break;
+	case USB_SPEED_HIGH:
+	/* USB core guesses at a 64-byte max packet first for FS devices */
+	case USB_SPEED_FULL:
+		ep0_ctx->ep_info2 |= MAX_PACKET(64);
+		break;
+	case USB_SPEED_LOW:
 		ep0_ctx->ep_info2 |= MAX_PACKET(8);
+		break;
+	case USB_SPEED_VARIABLE:
+		xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
+		return -EINVAL;
+		break;
+	default:
+		/* New speed? */
+		BUG();
+	}
 	/* EP 0 can handle "burst" sizes of 1, so Max Burst Size field is 0 */
 	ep0_ctx->ep_info2 |= MAX_BURST(0);
 	ep0_ctx->ep_info2 |= ERROR_COUNT(3);
@@ -598,6 +614,44 @@ void xhci_endpoint_zero(struct xhci_hcd *xhci,
 	 */
 }
 
+/* Copy output xhci_ep_ctx to the input xhci_ep_ctx copy.
+ * Useful when you want to change one particular aspect of the endpoint and then
+ * issue a configure endpoint command.
+ */
+void xhci_endpoint_copy(struct xhci_hcd *xhci,
+		struct xhci_virt_device *vdev, unsigned int ep_index)
+{
+	struct xhci_ep_ctx *out_ep_ctx;
+	struct xhci_ep_ctx *in_ep_ctx;
+
+	out_ep_ctx = xhci_get_ep_ctx(xhci, vdev->out_ctx, ep_index);
+	in_ep_ctx = xhci_get_ep_ctx(xhci, vdev->in_ctx, ep_index);
+
+	in_ep_ctx->ep_info = out_ep_ctx->ep_info;
+	in_ep_ctx->ep_info2 = out_ep_ctx->ep_info2;
+	in_ep_ctx->deq = out_ep_ctx->deq;
+	in_ep_ctx->tx_info = out_ep_ctx->tx_info;
+}
+
+/* Copy output xhci_slot_ctx to the input xhci_slot_ctx.
+ * Useful when you want to change one particular aspect of the endpoint and then
+ * issue a configure endpoint command.  Only the context entries field matters,
+ * but we'll copy the whole thing anyway.
+ */
+void xhci_slot_copy(struct xhci_hcd *xhci, struct xhci_virt_device *vdev)
+{
+	struct xhci_slot_ctx *in_slot_ctx;
+	struct xhci_slot_ctx *out_slot_ctx;
+
+	in_slot_ctx = xhci_get_slot_ctx(xhci, vdev->in_ctx);
+	out_slot_ctx = xhci_get_slot_ctx(xhci, vdev->out_ctx);
+
+	in_slot_ctx->dev_info = out_slot_ctx->dev_info;
+	in_slot_ctx->dev_info2 = out_slot_ctx->dev_info2;
+	in_slot_ctx->tt_info = out_slot_ctx->tt_info;
+	in_slot_ctx->dev_state = out_slot_ctx->dev_state;
+}
+
 /* Set up the scratchpad buffer array and scratchpad buffers, if needed. */
 static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags)
 {

drivers/usb/host/xhci-pci.c

@@ -24,6 +24,10 @@
 
 #include "xhci.h"
 
+/* Device for a quirk */
+#define PCI_VENDOR_ID_FRESCO_LOGIC	0x1b73
+#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK	0x1000
+
 static const char hcd_name[] = "xhci_hcd";
 
 /* called after powerup, by probe or system-pm "wakeup" */
@@ -62,6 +66,15 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 	xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
 	xhci_print_registers(xhci);
 
+	/* Look for vendor-specific quirks */
+	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
+			pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
+			pdev->revision == 0x0) {
+			xhci->quirks |= XHCI_RESET_EP_QUIRK;
+			xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
+					" endpoint cmd after reset endpoint\n");
+	}
+
 	/* Make sure the HC is halted. */
 	retval = xhci_halt(xhci);
 	if (retval)

drivers/usb/host/xhci.h

@@ -581,6 +581,7 @@ struct xhci_ep_ctx {
 /* bit 15 is Linear Stream Array */
 /* Interval - period between requests to an endpoint - 125u increments. */
 #define EP_INTERVAL(p)		((p & 0xff) << 16)
+#define EP_INTERVAL_TO_UFRAMES(p)		(1 << (((p) >> 16) & 0xff))
 
 /* ep_info2 bitmasks */
 /*
@@ -589,6 +590,7 @@ struct xhci_ep_ctx {
  */
 #define	FORCE_EVENT	(0x1)
 #define ERROR_COUNT(p)	(((p) & 0x3) << 1)
+#define CTX_TO_EP_TYPE(p)	(((p) >> 3) & 0x7)
 #define EP_TYPE(p)	((p) << 3)
 #define ISOC_OUT_EP	1
 #define BULK_OUT_EP	2
@@ -601,6 +603,8 @@ struct xhci_ep_ctx {
 /* bit 7 is Host Initiate Disable - for disabling stream selection */
 #define MAX_BURST(p)	(((p)&0xff) << 8)
 #define MAX_PACKET(p)	(((p)&0xffff) << 16)
+#define MAX_PACKET_MASK		(0xffff << 16)
+#define MAX_PACKET_DECODED(p)	(((p) >> 16) & 0xffff)
 
 
 /**
@@ -926,6 +930,12 @@ struct xhci_td {
 	union xhci_trb		*last_trb;
 };
 
+struct xhci_dequeue_state {
+	struct xhci_segment *new_deq_seg;
+	union xhci_trb *new_deq_ptr;
+	int new_cycle_state;
+};
+
 struct xhci_ring {
 	struct xhci_segment	*first_seg;
 	union  xhci_trb		*enqueue;
@@ -952,12 +962,6 @@ struct xhci_ring {
 	u32			cycle_state;
 };
 
-struct xhci_dequeue_state {
-	struct xhci_segment *new_deq_seg;
-	union xhci_trb *new_deq_ptr;
-	int new_cycle_state;
-};
-
 struct xhci_erst_entry {
 	/* 64-bit event ring segment address */
 	u64	seg_addr;
@@ -1058,6 +1062,9 @@ struct xhci_hcd {
 	int			noops_submitted;
 	int			noops_handled;
 	int			error_bitmask;
+	unsigned int		quirks;
+#define	XHCI_LINK_TRB_QUIRK	(1 << 0)
+#define XHCI_RESET_EP_QUIRK	(1 << 1)
 };
 
 /* For testing purposes */
@@ -1136,6 +1143,13 @@ static inline void xhci_write_64(struct xhci_hcd *xhci,
 	writel(val_hi, ptr + 1);
 }
 
+static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci)
+{
+	u32 temp = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
+	return ((HC_VERSION(temp) == 0x95) &&
+			(xhci->quirks & XHCI_LINK_TRB_QUIRK));
+}
+
 /* xHCI debugging */
 void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num);
 void xhci_print_registers(struct xhci_hcd *xhci);
@@ -1158,7 +1172,12 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device
 int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
 unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
 unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
+unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index);
+unsigned int xhci_last_valid_endpoint(u32 added_ctxs);
 void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep);
+void xhci_endpoint_copy(struct xhci_hcd *xhci,
+		struct xhci_virt_device *vdev, unsigned int ep_index);
+void xhci_slot_copy(struct xhci_hcd *xhci, struct xhci_virt_device *vdev);
 int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev,
 		struct usb_device *udev, struct usb_host_endpoint *ep,
 		gfp_t mem_flags);
@@ -1205,8 +1224,12 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
 		int slot_id, unsigned int ep_index);
 int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
 		int slot_id, unsigned int ep_index);
+int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
+		int slot_id, unsigned int ep_index);
 int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 		u32 slot_id);
+int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
+		u32 slot_id);
 int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
 		unsigned int ep_index);
 void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
@@ -1215,6 +1238,12 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
 		struct xhci_ring *ep_ring, unsigned int slot_id,
 		unsigned int ep_index, struct xhci_dequeue_state *deq_state);
+void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		unsigned int ep_index, struct xhci_ring *ep_ring);
+void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci,
+		unsigned int slot_id, unsigned int ep_index,
+		struct xhci_dequeue_state *deq_state);
 
 /* xHCI roothub code */
 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,

drivers/usb/serial/console.c

@@ -175,6 +175,7 @@ static int usb_console_setup(struct console *co, char *options)
 	/* The console is special in terms of closing the device so
 	 * indicate this port is now acting as a system console. */
 	port->console = 1;
+	port->console_init_baud = baud;
 	retval = 0;
 
 out:

drivers/usb/serial/ftdi_sio.c

@@ -176,6 +176,9 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_SNIFFER_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
@@ -702,6 +705,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
 	{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
+	{ USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };

drivers/usb/serial/ftdi_sio.h

@@ -81,6 +81,9 @@
 
 /* OpenDCC (www.opendcc.de) product id */
 #define FTDI_OPENDCC_PID	0xBFD8
+#define FTDI_OPENDCC_SNIFFER_PID	0xBFD9
+#define FTDI_OPENDCC_THROTTLE_PID	0xBFDA
+#define FTDI_OPENDCC_GATEWAY_PID	0xBFDB
 
 /* Sprog II (Andrew Crosland's SprogII DCC interface) */
 #define FTDI_SPROG_II		0xF0C8
@@ -967,6 +970,12 @@
  */
 #define MARVELL_OPENRD_PID	0x9e90
 
+/*
+ * Hameg HO820 and HO870 interface (using VID 0x0403)
+ */
+#define        HAMEG_HO820_PID         0xed74
+#define        HAMEG_HO870_PID         0xed71
+
 /*
  *   BmRequestType:  1100 0000b
  *   bRequest:       FTDI_E2_READ

drivers/usb/serial/option.c

@@ -292,6 +292,7 @@ static int  option_resume(struct usb_serial *serial);
 
 #define TELIT_VENDOR_ID				0x1bc7
 #define TELIT_PRODUCT_UC864E			0x1003
+#define TELIT_PRODUCT_UC864G			0x1004
 
 /* ZTE PRODUCTS */
 #define ZTE_VENDOR_ID				0x19d2
@@ -300,6 +301,7 @@ static int  option_resume(struct usb_serial *serial);
 #define ZTE_PRODUCT_MF626			0x0031
 #define ZTE_PRODUCT_CDMA_TECH			0xfffe
 #define ZTE_PRODUCT_AC8710			0xfff1
+#define ZTE_PRODUCT_AC2726			0xfff5
 
 #define BENQ_VENDOR_ID				0x04a5
 #define BENQ_PRODUCT_H10			0x4068
@@ -503,6 +505,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
 	{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0003, 0xff, 0xff, 0xff) },
@@ -572,6 +575,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
 	{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) },

drivers/usb/serial/pl2303.c

@@ -96,6 +96,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
 	{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
 	{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
+	{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 

drivers/usb/serial/pl2303.h

@@ -130,3 +130,7 @@
 /* Sony, USB data cable for CMD-Jxx mobile phones */
 #define SONY_VENDOR_ID		0x054c
 #define SONY_QN3USB_PRODUCT_ID	0x0437
+
+/* Sanwa KB-USB2 multimeter cable (ID: 11ad:0001) */
+#define SANWA_VENDOR_ID		0x11ad
+#define SANWA_PRODUCT_ID	0x0001

drivers/usb/serial/usb-serial.c

@@ -223,8 +223,7 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
 	tty->driver_data = port;
 	tty_port_tty_set(&port->port, tty);
 
-	/* If the console is attached, the device is already open */
-	if (port->port.count == 1 && !port->console) {
+	if (port->port.count == 1) {
 		first = 1;
 		/* lock this module before we call it
 		 * this may fail, which means we must bail out,
@@ -242,11 +241,17 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
 		if (retval)
 			goto bailout_module_put;
 
-		/* only call the device specific open if this
-		 * is the first time the port is opened */
+		/* only call the device specific open if this is the
+		 * first time the port is opened and it is not a
+		 * console port where the HW has already been
+		 * initialized */
+		if (port->console) {
+			tty_encode_baud_rate(tty, port->console_init_baud, port->console_init_baud);
+		} else {
 			retval = serial->type->open(tty, port, filp);
 			if (retval)
 				goto bailout_interface_put;
+		}
 		mutex_unlock(&serial->disc_mutex);
 		set_bit(ASYNCB_INITIALIZED, &port->port.flags);
 	}

drivers/usb/storage/onetouch.c

@@ -163,7 +163,7 @@ static void usb_onetouch_pm_hook(struct us_data *us, int action)
 			usb_kill_urb(onetouch->irq);
 			break;
 		case US_RESUME:
-			if (usb_submit_urb(onetouch->irq, GFP_KERNEL) != 0)
+			if (usb_submit_urb(onetouch->irq, GFP_NOIO) != 0)
 				dev_err(&onetouch->irq->dev->dev,
 					"usb_submit_urb failed\n");
 			break;

include/linux/usb/serial.h

@@ -107,6 +107,7 @@ struct usb_serial_port {
 	char			throttled;
 	char			throttle_req;
 	char			console;
+	int			console_init_baud;
 	unsigned long		sysrq; /* sysrq timeout */
 	struct device		dev;
 	enum port_dev_state	dev_state;