Skip to content

L
linux-davinci
Commit 81600eea authored by Lennert Buytenhek's avatar Lennert Buytenhek Committed by Lennert Buytenhek
Browse files
Options

mv643xx_eth: use auto phy polling for configuring (R)(G)MII interface 

The mv643xx_eth hardware has a provision for polling the PHY's
MII management registers to obtain the (R)(G)MII interface speed
(10/100/1000) and duplex (half/full) and pause (off/symmetric)
settings to use to talk to the PHY.

The driver currently does not make use of this feature.  Instead,
whenever there is a link status change event, it reads the current
link parameters from the PHY, and programs those parameters into
the mv643xx_eth MAC by hand.

This patch switches the mv643xx_eth driver to letting the MAC
auto-determine the (R)(G)MII link parameters by PHY polling, if there
is a PHY present.  For PHYless ports (when e.g. the (R)(G)MII
interface is connected to a hardware switch), we keep hardcoding the
MII interface parameters.
Signed-off-by: default avatarLennert Buytenhek <buytenh@marvell.com>
parent 7dde154d
Show whitespace changes
Inline Side-by-side
Showing with 81 additions and 74 deletions
arch/arm/mach-kirkwood/rd88f6281-setup.c
View file @ 81600eea
......@@ -18,6 +18,7 @@
#include <linux/timer.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
......@@ -69,6 +70,8 @@ static struct platform_device rd88f6281_nand_flash = {
static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
.phy_addr = -1,
.speed = SPEED_1000,
.duplex = DUPLEX_FULL,
};
static struct mv_sata_platform_data rd88f6281_sata_data = {
......
arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
View file @ 81600eea
......@@ -15,6 +15,7 @@
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include <asm/mach-types.h>
#include <asm/gpio.h>
#include <asm/leds.h>
......@@ -88,6 +89,8 @@ static struct orion5x_mpp_mode rd88f5181l_fxo_mpp_modes[] __initdata = {
static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
.phy_addr = -1,
.speed = SPEED_1000,
.duplex = DUPLEX_FULL,
};
static void __init rd88f5181l_fxo_init(void)
......
arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
View file @ 81600eea
......@@ -15,6 +15,7 @@
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include <linux/i2c.h>
#include <asm/mach-types.h>
#include <asm/gpio.h>
......@@ -89,6 +90,8 @@ static struct orion5x_mpp_mode rd88f5181l_ge_mpp_modes[] __initdata = {
static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
.phy_addr = -1,
.speed = SPEED_1000,
.duplex = DUPLEX_FULL,
};
static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
......
arch/arm/mach-orion5x/wnr854t-setup.c
View file @ 81600eea
......@@ -14,6 +14,7 @@
#include <linux/delay.h>
#include <linux/mtd/physmap.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include <asm/mach-types.h>
#include <asm/gpio.h>
#include <asm/mach/arch.h>
......@@ -92,6 +93,8 @@ static struct platform_device wnr854t_nor_flash = {
static struct mv643xx_eth_platform_data wnr854t_eth_data = {
.phy_addr = -1,
.speed = SPEED_1000,
.duplex = DUPLEX_FULL,
};
static void __init wnr854t_init(void)
......
arch/arm/mach-orion5x/wrt350n-v2-setup.c
View file @ 81600eea
......@@ -14,6 +14,7 @@
#include <linux/delay.h>
#include <linux/mtd/physmap.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include <asm/mach-types.h>
#include <asm/gpio.h>
#include <asm/mach/arch.h>
......@@ -100,6 +101,8 @@ static struct platform_device wrt350n_v2_nor_flash = {
static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
.phy_addr = -1,
.speed = SPEED_1000,
.duplex = DUPLEX_FULL,
};
static void __init wrt350n_v2_init(void)
......
drivers/net/mv643xx_eth.c
View file @ 81600eea
......@@ -91,6 +91,7 @@ static char mv643xx_eth_driver_version[] = "1.1";
#define PORT_STATUS(p) (0x0444 + ((p) << 10))
#define TX_FIFO_EMPTY 0x00000400
#define TX_IN_PROGRESS 0x00000080
#define LINK_UP 0x00000002
#define TXQ_COMMAND(p) (0x0448 + ((p) << 10))
#define TXQ_FIX_PRIO_CONF(p) (0x044c + ((p) << 10))
#define TX_BW_RATE(p) (0x0450 + ((p) << 10))
......@@ -156,7 +157,6 @@ static char mv643xx_eth_driver_version[] = "1.1";
#define SET_GMII_SPEED_TO_1000 (1 << 23)
#define SET_FULL_DUPLEX_MODE (1 << 21)
#define MAX_RX_PACKET_9700BYTE (5 << 17)
#define MAX_RX_PACKET_MASK (7 << 17)
#define DISABLE_AUTO_NEG_SPEED_GMII (1 << 13)
#define DO_NOT_FORCE_LINK_FAIL (1 << 10)
#define SERIAL_PORT_CONTROL_RESERVED (1 << 9)
......@@ -1135,10 +1135,28 @@ static int mv643xx_eth_get_settings(struct net_device *dev, struct ethtool_cmd *
static int mv643xx_eth_get_settings_phyless(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct mv643xx_eth_private *mp = netdev_priv(dev);
u32 port_status;
port_status = rdl(mp, PORT_STATUS(mp->port_num));
cmd->supported = SUPPORTED_MII;
cmd->advertising = ADVERTISED_MII;
switch (port_status & PORT_SPEED_MASK) {
case PORT_SPEED_10:
cmd->speed = SPEED_10;
break;
case PORT_SPEED_100:
cmd->speed = SPEED_100;
break;
case PORT_SPEED_1000:
cmd->speed = SPEED_1000;
cmd->duplex = DUPLEX_FULL;
break;
default:
cmd->speed = -1;
break;
}
cmd->duplex = (port_status & FULL_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF;
cmd->port = PORT_MII;
cmd->phy_address = 0;
cmd->transceiver = XCVR_INTERNAL;
......@@ -1661,51 +1679,6 @@ static void txq_deinit(struct tx_queue *txq)
/* netdev ops and related ***************************************************/
static void update_pscr(struct mv643xx_eth_private *mp, int speed, int duplex)
{
u32 pscr_o;
u32 pscr_n;
pscr_o = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
/* clear speed, duplex and rx buffer size fields */
pscr_n = pscr_o & ~(SET_MII_SPEED_TO_100 |
SET_GMII_SPEED_TO_1000 |
SET_FULL_DUPLEX_MODE |
MAX_RX_PACKET_MASK);
pscr_n |= MAX_RX_PACKET_9700BYTE;
if (speed == SPEED_1000)
pscr_n |= SET_GMII_SPEED_TO_1000;
else if (speed == SPEED_100)
pscr_n |= SET_MII_SPEED_TO_100;
if (duplex == DUPLEX_FULL)
pscr_n |= SET_FULL_DUPLEX_MODE;
if (pscr_n != pscr_o) {
if ((pscr_o & SERIAL_PORT_ENABLE) == 0)
wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n);
else {
int i;
for (i = 0; i < 8; i++)
if (mp->txq_mask & (1 << i))
txq_disable(mp->txq + i);
pscr_o &= ~SERIAL_PORT_ENABLE;
wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_o);
wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n);
wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n);
for (i = 0; i < 8; i++)
if (mp->txq_mask & (1 << i))
txq_enable(mp->txq + i);
}
}
}
static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id)
{
struct net_device *dev = (struct net_device *)dev_id;
......@@ -1726,14 +1699,7 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id)
}
if (int_cause_ext & (INT_EXT_PHY | INT_EXT_LINK)) {
if (mp->phy_addr == -1 || mii_link_ok(&mp->mii)) {
if (mp->phy_addr != -1) {
struct ethtool_cmd cmd;
mii_ethtool_gset(&mp->mii, &cmd);
update_pscr(mp, cmd.speed, cmd.duplex);
}
if (rdl(mp, PORT_STATUS(mp->port_num)) & LINK_UP) {
if (!netif_carrier_ok(dev)) {
netif_carrier_on(dev);
netif_wake_queue(dev);
......@@ -1846,23 +1812,6 @@ static void port_start(struct mv643xx_eth_private *mp)
u32 pscr;
int i;
/*
* Configure basic link parameters.
*/
pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
pscr &= ~(SERIAL_PORT_ENABLE | FORCE_LINK_PASS);
wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
pscr |= DISABLE_AUTO_NEG_FOR_FLOW_CTRL |
DISABLE_AUTO_NEG_SPEED_GMII |
DISABLE_AUTO_NEG_FOR_DUPLEX |
DO_NOT_FORCE_LINK_FAIL |
SERIAL_PORT_CONTROL_RESERVED;
wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
pscr |= SERIAL_PORT_ENABLE;
wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
wrl(mp, SDMA_CONFIG(mp->port_num), PORT_SDMA_CONFIG_DEFAULT_VALUE);
/*
* Perform PHY reset, if there is a PHY.
*/
......@@ -1874,6 +1823,21 @@ static void port_start(struct mv643xx_eth_private *mp)
mv643xx_eth_set_settings(mp->dev, &cmd);
}
/*
* Configure basic link parameters.
*/
pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
pscr |= SERIAL_PORT_ENABLE;
wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
pscr |= DO_NOT_FORCE_LINK_FAIL;
if (mp->phy_addr == -1)
pscr |= FORCE_LINK_PASS;
wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
wrl(mp, SDMA_CONFIG(mp->port_num), PORT_SDMA_CONFIG_DEFAULT_VALUE);
/*
* Configure TX path and queues.
*/
......@@ -2441,12 +2405,39 @@ static int phy_init(struct mv643xx_eth_private *mp,
cmd.duplex = pd->duplex;
}
update_pscr(mp, cmd.speed, cmd.duplex);
mv643xx_eth_set_settings(mp->dev, &cmd);
return 0;
}
static void init_pscr(struct mv643xx_eth_private *mp, int speed, int duplex)
{
u32 pscr;
pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
if (pscr & SERIAL_PORT_ENABLE) {
pscr &= ~SERIAL_PORT_ENABLE;
wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
}
pscr = MAX_RX_PACKET_9700BYTE | SERIAL_PORT_CONTROL_RESERVED;
if (mp->phy_addr == -1) {
pscr |= DISABLE_AUTO_NEG_SPEED_GMII;
if (speed == SPEED_1000)
pscr |= SET_GMII_SPEED_TO_1000;
else if (speed == SPEED_100)
pscr |= SET_MII_SPEED_TO_100;
pscr |= DISABLE_AUTO_NEG_FOR_FLOW_CTRL;
pscr |= DISABLE_AUTO_NEG_FOR_DUPLEX;
if (duplex == DUPLEX_FULL)
pscr |= SET_FULL_DUPLEX_MODE;
}
wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
}
static int mv643xx_eth_probe(struct platform_device *pdev)
{
struct mv643xx_eth_platform_data *pd;
......@@ -2500,6 +2491,7 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
} else {
SET_ETHTOOL_OPS(dev, &mv643xx_eth_ethtool_ops_phyless);
}
init_pscr(mp, pd->speed, pd->duplex);
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment