Commit 81447b2e authored by Philipp Zabel's avatar Philipp Zabel Committed by Russell King

[ARM] 4965/1: magician: use htc-pasic3,leds-pasic3,ds1wm,leds-gpio

This patch enables LEDs and the 1-wire bus (connected to
a DS2760 battery monitor) on the magician.
Signed-off-by: default avatarPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 5dc3339a
# #
# Automatically generated make config: don't edit # Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc6 # Linux kernel version: 2.6.24-rc6
# Sat Dec 22 10:38:43 2007 # Sun Dec 30 13:02:54 2007
# #
CONFIG_ARM=y CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y
...@@ -694,12 +694,26 @@ CONFIG_I2C_PXA=m ...@@ -694,12 +694,26 @@ CONFIG_I2C_PXA=m
# #
# CONFIG_SPI is not set # CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set # CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set CONFIG_W1=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_DS1WM=y
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_POWER_SUPPLY=y CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y CONFIG_PDA_POWER=y
# CONFIG_APM_POWER is not set # CONFIG_APM_POWER is not set
# CONFIG_BATTERY_DS2760 is not set CONFIG_BATTERY_DS2760=y
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
# CONFIG_WATCHDOG is not set # CONFIG_WATCHDOG is not set
...@@ -714,6 +728,7 @@ CONFIG_SSB_POSSIBLE=y ...@@ -714,6 +728,7 @@ CONFIG_SSB_POSSIBLE=y
# #
# CONFIG_MFD_SM501 is not set # CONFIG_MFD_SM501 is not set
CONFIG_HTC_EGPIO=y CONFIG_HTC_EGPIO=y
CONFIG_HTC_PASIC3=y
# #
# Multimedia devices # Multimedia devices
...@@ -855,7 +870,7 @@ CONFIG_SDIO_UART=m ...@@ -855,7 +870,7 @@ CONFIG_SDIO_UART=m
# MMC/SD Host Controller Drivers # MMC/SD Host Controller Drivers
# #
CONFIG_MMC_PXA=y CONFIG_MMC_PXA=y
# CONFIG_NEW_LEDS is not set CONFIG_NEW_LEDS=y
CONFIG_RTC_LIB=y CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS=y
......
...@@ -20,6 +20,7 @@ ...@@ -20,6 +20,7 @@
#include <linux/gpio_keys.h> #include <linux/gpio_keys.h>
#include <linux/input.h> #include <linux/input.h>
#include <linux/mfd/htc-egpio.h> #include <linux/mfd/htc-egpio.h>
#include <linux/mfd/htc-pasic3.h>
#include <linux/mtd/mtd.h> #include <linux/mtd/mtd.h>
#include <linux/mtd/map.h> #include <linux/mtd/map.h>
#include <linux/mtd/physmap.h> #include <linux/mtd/physmap.h>
...@@ -299,6 +300,107 @@ static struct platform_device backlight = { ...@@ -299,6 +300,107 @@ static struct platform_device backlight = {
.id = -1, .id = -1,
}; };
/*
* LEDs
*/
struct gpio_led gpio_leds[] = {
{
.name = "magician::vibra",
.default_trigger = "none",
.gpio = GPIO22_MAGICIAN_VIBRA_EN,
},
{
.name = "magician::phone_bl",
.default_trigger = "none",
.gpio = GPIO103_MAGICIAN_LED_KP,
},
};
static struct gpio_led_platform_data gpio_led_info = {
.leds = gpio_leds,
.num_leds = ARRAY_SIZE(gpio_leds),
};
static struct platform_device leds_gpio = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &gpio_led_info,
},
};
static struct pasic3_led pasic3_leds[] = {
{
.led = {
.name = "magician:red",
.default_trigger = "ds2760-battery.0-charging",
},
.hw_num = 0,
.bit2 = PASIC3_BIT2_LED0,
.mask = PASIC3_MASK_LED0,
},
{
.led = {
.name = "magician:green",
.default_trigger = "ds2760-battery.0-charging-or-full",
},
.hw_num = 1,
.bit2 = PASIC3_BIT2_LED1,
.mask = PASIC3_MASK_LED1,
},
{
.led = {
.name = "magician:blue",
.default_trigger = "bluetooth",
},
.hw_num = 2,
.bit2 = PASIC3_BIT2_LED2,
.mask = PASIC3_MASK_LED2,
},
};
static struct platform_device pasic3;
static struct pasic3_leds_machinfo __devinit pasic3_leds_info = {
.num_leds = ARRAY_SIZE(pasic3_leds),
.power_gpio = EGPIO_MAGICIAN_LED_POWER,
.leds = pasic3_leds,
};
/*
* PASIC3 with DS1WM
*/
static struct resource pasic3_resources[] = {
[0] = {
.start = PXA_CS2_PHYS,
.end = PXA_CS2_PHYS + 0x1b,
.flags = IORESOURCE_MEM,
},
/* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */
[1] = {
.start = gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ),
.end = gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
static struct pasic3_platform_data pasic3_platform_data = {
.bus_shift = 2,
.led_pdata = &pasic3_leds_info,
.clock_rate = 4000000,
};
static struct platform_device pasic3 = {
.name = "pasic3",
.id = -1,
.num_resources = ARRAY_SIZE(pasic3_resources),
.resource = pasic3_resources,
.dev = {
.platform_data = &pasic3_platform_data,
},
};
/* /*
* External power * External power
...@@ -320,10 +422,16 @@ static void magician_set_charge(int flags) ...@@ -320,10 +422,16 @@ static void magician_set_charge(int flags)
gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags); gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags);
} }
static char *magician_supplicants[] = {
"ds2760-battery.0", "backup-battery"
};
static struct pda_power_pdata power_supply_info = { static struct pda_power_pdata power_supply_info = {
.is_ac_online = magician_is_ac_online, .is_ac_online = magician_is_ac_online,
.is_usb_online = magician_is_usb_online, .is_usb_online = magician_is_usb_online,
.set_charge = magician_set_charge, .set_charge = magician_set_charge,
.supplied_to = magician_supplicants,
.num_supplicants = ARRAY_SIZE(magician_supplicants),
}; };
static struct resource power_supply_resources[] = { static struct resource power_supply_resources[] = {
...@@ -449,8 +557,10 @@ static struct platform_device *devices[] __initdata = { ...@@ -449,8 +557,10 @@ static struct platform_device *devices[] __initdata = {
&gpio_keys, &gpio_keys,
&egpio, &egpio,
&backlight, &backlight,
&pasic3,
&power_supply, &power_supply,
&strataflash, &strataflash,
&leds_gpio,
}; };
static void __init magician_init(void) static void __init magician_init(void)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment