USB: clarify usage of hcd->suspend/resume methods

The .suspend and .resume method pointers in struct usb_hcd have not
been fully understood by host-controller driver writers.  They are
meant for use with PCI controllers; other platform-specific drivers
generally should not refer to them.

To try and clarify matters, this patch (as1065) renames those methods
to .pci_suspend and .pci_resume.  It eliminates corresponding dead code
and bogus references in the ohci-ssb and u132-hcd drivers.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/core/hcd-pci.c

@@ -215,9 +215,9 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
 			hcd->state == HC_STATE_HALT))
 		return -EBUSY;
 
-	if (hcd->driver->suspend) {
-		retval = hcd->driver->suspend(hcd, message);
-		suspend_report_result(hcd->driver->suspend, retval);
+	if (hcd->driver->pci_suspend) {
+		retval = hcd->driver->pci_suspend(hcd, message);
+		suspend_report_result(hcd->driver->pci_suspend, retval);
 		if (retval)
 			goto done;
 	}
@@ -405,8 +405,8 @@ int usb_hcd_pci_resume(struct pci_dev *dev)
 
 	clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
 
-	if (hcd->driver->resume) {
-		retval = hcd->driver->resume(hcd);
+	if (hcd->driver->pci_resume) {
+		retval = hcd->driver->pci_resume(hcd);
 		if (retval) {
 			dev_err(hcd->self.controller,
 				"PCI post-resume error %d!\n", retval);

drivers/usb/core/hcd.h

@@ -178,10 +178,10 @@ struct hc_driver {
 	 * a whole, not just the root hub; they're for PCI bus glue.
 	 */
 	/* called after suspending the hub, before entering D3 etc */
-	int	(*suspend) (struct usb_hcd *hcd, pm_message_t message);
+	int	(*pci_suspend) (struct usb_hcd *hcd, pm_message_t message);
 
 	/* called after entering D0 (etc), before resuming the hub */
-	int	(*resume) (struct usb_hcd *hcd);
+	int	(*pci_resume) (struct usb_hcd *hcd);
 
 	/* cleanly make HCD stop writing memory and doing I/O */
 	void	(*stop) (struct usb_hcd *hcd);

drivers/usb/host/ehci-pci.c

@@ -353,8 +353,8 @@ static const struct hc_driver ehci_pci_hc_driver = {
 	.reset =		ehci_pci_setup,
 	.start =		ehci_run,
 #ifdef	CONFIG_PM
-	.suspend =		ehci_pci_suspend,
-	.resume =		ehci_pci_resume,
+	.pci_suspend =		ehci_pci_suspend,
+	.pci_resume =		ehci_pci_resume,
 #endif
 	.stop =			ehci_stop,
 	.shutdown =		ehci_shutdown,

drivers/usb/host/ohci-pci.c

@@ -347,9 +347,8 @@ static const struct hc_driver ohci_pci_hc_driver = {
 	.shutdown =		ohci_shutdown,
 
 #ifdef	CONFIG_PM
-	/* these suspend/resume entries are for upstream PCI glue ONLY */
-	.suspend =		ohci_pci_suspend,
-	.resume =		ohci_pci_resume,
+	.pci_suspend =		ohci_pci_suspend,
+	.pci_resume =		ohci_pci_resume,
 #endif
 
 	/*

drivers/usb/host/ohci-ssb.c

@@ -60,36 +60,6 @@ static int ssb_ohci_start(struct usb_hcd *hcd)
 	return err;
 }
 
-#ifdef CONFIG_PM
-static int ssb_ohci_hcd_suspend(struct usb_hcd *hcd, pm_message_t message)
-{
-	struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
-	struct ohci_hcd *ohci = &ohcidev->ohci;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ohci->lock, flags);
-
-	ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
-	ohci_readl(ohci, &ohci->regs->intrdisable); /* commit write */
-
-	/* make sure snapshot being resumed re-enumerates everything */
-	if (message.event == PM_EVENT_PRETHAW)
-		ohci_usb_reset(ohci);
-
-	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-
-	spin_unlock_irqrestore(&ohci->lock, flags);
-	return 0;
-}
-
-static int ssb_ohci_hcd_resume(struct usb_hcd *hcd)
-{
-	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-	usb_hcd_resume_root_hub(hcd);
-	return 0;
-}
-#endif /* CONFIG_PM */
-
 static const struct hc_driver ssb_ohci_hc_driver = {
 	.description		= "ssb-usb-ohci",
 	.product_desc		= "SSB OHCI Controller",
@@ -103,11 +73,6 @@ static const struct hc_driver ssb_ohci_hc_driver = {
 	.stop			= ohci_stop,
 	.shutdown		= ohci_shutdown,
 
-#ifdef CONFIG_PM
-	.suspend		= ssb_ohci_hcd_suspend,
-	.resume			= ssb_ohci_hcd_resume,
-#endif
-
 	.urb_enqueue		= ohci_urb_enqueue,
 	.urb_dequeue		= ohci_urb_dequeue,
 	.endpoint_disable	= ohci_endpoint_disable,

drivers/usb/host/u132-hcd.c

@@ -2946,34 +2946,6 @@ static void u132_hub_irq_enable(struct usb_hcd *hcd)
 
 
 #ifdef CONFIG_PM
-static int u132_hcd_suspend(struct usb_hcd *hcd, pm_message_t message)
-{
-	struct u132 *u132 = hcd_to_u132(hcd);
-	if (u132->going > 1) {
-		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
-			, u132->going);
-		return -ENODEV;
-	} else if (u132->going > 0) {
-		dev_err(&u132->platform_dev->dev, "device is being removed\n");
-		return -ESHUTDOWN;
-	} else
-		return 0;
-}
-
-static int u132_hcd_resume(struct usb_hcd *hcd)
-{
-	struct u132 *u132 = hcd_to_u132(hcd);
-	if (u132->going > 1) {
-		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
-			, u132->going);
-		return -ENODEV;
-	} else if (u132->going > 0) {
-		dev_err(&u132->platform_dev->dev, "device is being removed\n");
-		return -ESHUTDOWN;
-	} else
-		return 0;
-}
-
 static int u132_bus_suspend(struct usb_hcd *hcd)
 {
 	struct u132 *u132 = hcd_to_u132(hcd);
@@ -3003,8 +2975,6 @@ static int u132_bus_resume(struct usb_hcd *hcd)
 }
 
 #else
-#define u132_hcd_suspend NULL
-#define u132_hcd_resume NULL
 #define u132_bus_suspend NULL
 #define u132_bus_resume NULL
 #endif
@@ -3015,8 +2985,6 @@ static struct hc_driver u132_hc_driver = {
 	.flags = HCD_USB11 | HCD_MEMORY,
 	.reset = u132_hcd_reset,
 	.start = u132_hcd_start,
-	.suspend = u132_hcd_suspend,
-	.resume = u132_hcd_resume,
 	.stop = u132_hcd_stop,
 	.urb_enqueue = u132_urb_enqueue,
 	.urb_dequeue = u132_urb_dequeue,

drivers/usb/host/uhci-hcd.c

@@ -737,7 +737,7 @@ static int uhci_rh_resume(struct usb_hcd *hcd)
 	return rc;
 }
 
-static int uhci_suspend(struct usb_hcd *hcd, pm_message_t message)
+static int uhci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
 {
 	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 	int rc = 0;
@@ -774,7 +774,7 @@ done:
 	return rc;
 }
 
-static int uhci_resume(struct usb_hcd *hcd)
+static int uhci_pci_resume(struct usb_hcd *hcd)
 {
 	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 
@@ -872,8 +872,8 @@ static const struct hc_driver uhci_driver = {
 	.reset =		uhci_init,
 	.start =		uhci_start,
 #ifdef CONFIG_PM
-	.suspend =		uhci_suspend,
-	.resume =		uhci_resume,
+	.pci_suspend =		uhci_pci_suspend,
+	.pci_resume =		uhci_pci_resume,
 	.bus_suspend =		uhci_rh_suspend,
 	.bus_resume =		uhci_rh_resume,
 #endif