V4L/DVB (4922): Add usbvision driver

This patch adds usbvision into V4L/DVB HG tree.
Usbvision driver is a GPL driver, made by:
	Joerg Heckenbach <joerg@heckenbach-aw.de>
		and
	Dwaine Garden <DwaineGarden@rogers.com>
V4L2 migration made by:
	Thierry Merle <thierry.merle@free.fr>
Kconfig/Makefile scripts by:
	Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Joerg Heckenbach <joerg@heckenbach-aw.de>
Signed-off-by: Dwaine Garden <dwainegarden@rogers.com>
Signed-off-by: Thierry Merle <thierry.merle@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/video/Kconfig

@@ -686,6 +686,18 @@ source "drivers/media/video/pvrusb2/Kconfig"
 
 source "drivers/media/video/em28xx/Kconfig"
 
+config VIDEO_USBVISION
+	tristate "USB video devices based on NT1003/1005/1005"
+	depends on I2C && VIDEO_V4L2
+	select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
+	---help---
+	  There are more than 50 different USB video devices based on
+	  NT1003/1004/1005 USB Bridges. This driver enables using those
+	  devices.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ovcamchip.
+
 source "drivers/media/video/usbvideo/Kconfig"
 
 source "drivers/media/video/et61x251/Kconfig"

drivers/media/video/Makefile

@@ -62,6 +62,7 @@ obj-$(CONFIG_VIDEO_MEYE) += meye.o
 obj-$(CONFIG_VIDEO_SAA7134) += ir-kbd-i2c.o saa7134/
 obj-$(CONFIG_VIDEO_CX88) += cx88/
 obj-$(CONFIG_VIDEO_EM28XX) += em28xx/
+obj-$(CONFIG_VIDEO_USBVISION) += usbvision/
 obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o
 obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2/
 obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o

drivers/media/video/usbvision/Makefile

+usbvision-objs  := usbvision-core.o usbvision-i2c.o
+
+obj-$(CONFIG_VIDEO_USBVISION) += usbvision.o
+
+EXTRA_CFLAGS += -Idrivers/media/video

drivers/media/video/usbvision/usbvision-i2c.c

+/* 
+ * I2C_ALGO_USB.C
+ *  i2c algorithm for USB-I2C Bridges
+ *
+ * Copyright (c) 1999-2005 Joerg Heckenbach <joerg@heckenbach-aw.de>
+ *                         Dwaine Garden <dwainegarden@rogers.com>
+ *
+ * This module is part of usbvision driver project.
+ * Updates to driver completed by Dwaine P. Garden
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/version.h>
+	#include <linux/utsname.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/usb.h>
+#include <linux/i2c.h>
+#include "usbvision-i2c.h"
+
+static int debug = 0;	
+
+#if defined(module_param)                               // Showing parameters under SYSFS
+module_param (debug, int, 0444);			// debug mode of the device driver
+#else
+MODULE_PARM(debug, "i");				// debug mode of the device driver
+#endif
+
+MODULE_AUTHOR("Joerg Heckenbach");
+MODULE_DESCRIPTION("I2C algorithm for USB-I2C-bridges");
+MODULE_LICENSE("GPL");
+
+
+static inline int try_write_address(struct i2c_adapter *i2c_adap,
+				    unsigned char addr, int retries)
+{
+	struct i2c_algo_usb_data *adap = i2c_adap->algo_data;
+	void *data;
+	int i, ret = -1;
+	char buf[4];
+
+	data = i2c_get_adapdata(i2c_adap);
+	buf[0] = 0x00;
+	for (i = 0; i <= retries; i++) {
+		ret = (adap->outb(data, addr, buf, 1));
+		if (ret == 1)
+			break;	/* success! */
+		udelay(5 /*adap->udelay */ );
+		if (i == retries)	/* no success */
+			break;
+		udelay(adap->udelay);
+	}
+	if (debug) {
+		if (i) {
+			info("%s: Needed %d retries for address %#2x", __FUNCTION__, i, addr);
+			info("%s: Maybe there's no device at this address", __FUNCTION__);
+		}
+	}
+	return ret;
+}
+
+static inline int try_read_address(struct i2c_adapter *i2c_adap,
+				   unsigned char addr, int retries)
+{
+	struct i2c_algo_usb_data *adap = i2c_adap->algo_data;
+	void *data;
+	int i, ret = -1;
+	char buf[4];
+
+	data = i2c_get_adapdata(i2c_adap);
+	for (i = 0; i <= retries; i++) {
+		ret = (adap->inb(data, addr, buf, 1));
+		if (ret == 1)
+			break;	/* success! */
+		udelay(5 /*adap->udelay */ );
+		if (i == retries)	/* no success */
+			break;
+		udelay(adap->udelay);
+	}
+	if (debug) {
+		if (i) {
+			info("%s: Needed %d retries for address %#2x", __FUNCTION__, i, addr);
+			info("%s: Maybe there's no device at this address", __FUNCTION__);
+		}
+	}
+	return ret;
+}
+
+static inline int usb_find_address(struct i2c_adapter *i2c_adap,
+				   struct i2c_msg *msg, int retries,
+				   unsigned char *add)
+{
+	unsigned short flags = msg->flags;
+	
+	unsigned char addr;
+	int ret;
+	if ((flags & I2C_M_TEN)) {
+		/* a ten bit address */
+		addr = 0xf0 | ((msg->addr >> 7) & 0x03);
+		/* try extended address code... */
+		ret = try_write_address(i2c_adap, addr, retries);
+		if (ret != 1) {
+			err("died at extended address code, while writing");
+			return -EREMOTEIO;
+		}
+		add[0] = addr;
+		if (flags & I2C_M_RD) {
+			/* okay, now switch into reading mode */
+			addr |= 0x01;
+			ret = try_read_address(i2c_adap, addr, retries);
+			if (ret != 1) {
+				err("died at extended address code, while reading");
+				return -EREMOTEIO;
+			}
+		}
+
+	} else {		/* normal 7bit address  */
+		addr = (msg->addr << 1);
+		if (flags & I2C_M_RD)
+			addr |= 1;
+		if (flags & I2C_M_REV_DIR_ADDR)
+			addr ^= 1;
+
+		add[0] = addr;
+		if (flags & I2C_M_RD)
+			ret = try_read_address(i2c_adap, addr, retries);
+		else
+			ret = try_write_address(i2c_adap, addr, retries);
+
+		if (ret != 1) {
+			return -EREMOTEIO;
+		}
+	}
+	return 0;
+}
+
+static int
+usb_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num)
+{
+	struct i2c_msg *pmsg;
+	struct i2c_algo_usb_data *adap = i2c_adap->algo_data;
+	void *data;
+	int i, ret;
+	unsigned char addr;
+
+	data = i2c_get_adapdata(i2c_adap);
+
+	for (i = 0; i < num; i++) {
+		pmsg = &msgs[i];
+		ret = usb_find_address(i2c_adap, pmsg, i2c_adap->retries, &addr);
+		if (ret != 0) {
+			if (debug) {
+				info("%s: got NAK from device, message #%d\n", __FUNCTION__, i);
+			}
+			return (ret < 0) ? ret : -EREMOTEIO;
+		}
+
+		if (pmsg->flags & I2C_M_RD) {
+			/* read bytes into buffer */
+			ret = (adap->inb(data, addr, pmsg->buf, pmsg->len));
+			if (ret < pmsg->len) {
+				return (ret < 0) ? ret : -EREMOTEIO;
+			}
+		} else {
+			/* write bytes from buffer */
+			ret = (adap->outb(data, addr, pmsg->buf, pmsg->len));
+			if (ret < pmsg->len) {
+				return (ret < 0) ? ret : -EREMOTEIO;
+			}
+		}
+	}
+	return num;
+}
+
+static int algo_control(struct i2c_adapter *adapter, unsigned int cmd, unsigned long arg)
+{
+	return 0;
+}
+
+static u32 usb_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING;
+}
+
+
+/* -----exported algorithm data: -------------------------------------	*/
+
+static struct i2c_algorithm i2c_usb_algo = {
+	.master_xfer   = usb_xfer,
+	.smbus_xfer    = NULL,
+	.slave_send    = NULL,
+	.slave_recv    = NULL,
+	.algo_control  = algo_control,
+	.functionality = usb_func,
+};
+
+
+/*
+ * registering functions to load algorithms at runtime
+ */
+int usbvision_i2c_usb_add_bus(struct i2c_adapter *adap)
+{
+	/* register new adapter to i2c module... */
+
+	adap->algo = &i2c_usb_algo;
+
+	adap->timeout = 100;	/* default values, should       */
+	adap->retries = 3;	/* be replaced by defines       */
+
+#ifdef MODULE
+	#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 21)
+		MOD_INC_USE_COUNT;
+	#endif
+#endif
+
+	i2c_add_adapter(adap);
+
+	if (debug) {
+		info("i2c bus for %s registered", adap->name);
+	}
+
+	return 0;
+}
+
+
+int usbvision_i2c_usb_del_bus(struct i2c_adapter *adap)
+{
+
+	i2c_del_adapter(adap);
+
+	if (debug) {
+		info("i2c bus for %s unregistered", adap->name);
+	}
+#ifdef MODULE
+	#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 21)
+		MOD_DEC_USE_COUNT;
+	#endif
+#endif
+
+	return 0;
+}
+
+EXPORT_SYMBOL(usbvision_i2c_usb_add_bus);
+EXPORT_SYMBOL(usbvision_i2c_usb_del_bus);

drivers/media/video/usbvision/usbvision-i2c.h

+/* 
+ * I2C_ALGO_USB.H
+ *  i2c algorithm for USB-I2C Bridges
+ *
+ * Copyright (c) 1999-2005 Joerg Heckenbach <joerg@heckenbach-aw.de>
+ *
+ * This module is part of usbvision driver project.
+ * Updates to driver completed by Dwaine P. Garden
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifndef I2C_ALGO_USB_H
+#define I2C_ALGO_USB_H 1 
+
+#include <linux/i2c.h>
+
+struct i2c_algo_usb_data {
+	void *data;		/* private data for lowlevel routines */
+	int (*inb) (void *data, unsigned char addr, char *buf, short len);
+	int (*outb) (void *data, unsigned char addr, char *buf, short len);
+
+	/* local settings */
+	int udelay;
+	int mdelay;
+	int timeout;
+};
+
+#define I2C_USB_ADAP_MAX	16
+
+int usbvision_i2c_usb_add_bus(struct i2c_adapter *);
+int usbvision_i2c_usb_del_bus(struct i2c_adapter *);
+
+static inline void *i2c_get_algo_usb_data (struct i2c_algo_usb_data *dev)
+{
+	return dev->data;
+}
+
+static inline void i2c_set_algo_usb_data (struct i2c_algo_usb_data *dev, void *data)
+{
+	dev->data = data;
+}
+
+
+#endif //I2C_ALGO_USB_H

drivers/media/video/usbvision/usbvision.h

+/* 
+ * USBVISION.H
+ *  usbvision header file
+ *
+ * Copyright (c) 1999-2005 Joerg Heckenbach <joerg@heckenbach-aw.de>
+ *
+ * This module is part of usbvision driver project.
+ * Updates to driver completed by Dwaine P. Garden
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifndef __LINUX_USBVISION_H
+#define __LINUX_USBVISION_H
+
+#include <linux/list.h>
+
+#ifndef VID_HARDWARE_USBVISION
+	#define VID_HARDWARE_USBVISION 34   /* USBVision Video Grabber */
+#endif
+
+#define USBVISION_PWR_REG		0x00
+	#define USBVISION_SSPND_EN		(1 << 1)
+	#define USBVISION_RES2			(1 << 2)
+	#define USBVISION_PWR_VID		(1 << 5)
+        #define USBVISION_E2_EN			(1 << 7)
+#define USBVISION_CONFIG_REG		0x01
+#define USBVISION_ADRS_REG		0x02
+#define USBVISION_ALTER_REG		0x03
+#define USBVISION_FORCE_ALTER_REG	0x04
+#define USBVISION_STATUS_REG		0x05
+#define USBVISION_IOPIN_REG		0x06
+	#define USBVISION_IO_1			(1 << 0)
+	#define USBVISION_IO_2			(1 << 1)
+	#define USBVISION_AUDIO_IN		0
+	#define USBVISION_AUDIO_TV		1
+	#define USBVISION_AUDIO_RADIO		2
+	#define USBVISION_AUDIO_MUTE		3
+#define USBVISION_SER_MODE		0x07
+#define USBVISION_SER_ADRS		0x08
+#define USBVISION_SER_CONT		0x09
+#define USBVISION_SER_DAT1		0x0A
+#define USBVISION_SER_DAT2		0x0B
+#define USBVISION_SER_DAT3		0x0C
+#define USBVISION_SER_DAT4		0x0D
+#define USBVISION_EE_DATA		0x0E
+#define USBVISION_EE_LSBAD		0x0F
+#define USBVISION_EE_CONT		0x10
+#define USBVISION_DRM_CONT			0x12
+	#define USBVISION_REF			(1 << 0)
+	#define USBVISION_RES_UR		(1 << 2)
+	#define USBVISION_RES_FDL		(1 << 3)
+	#define USBVISION_RES_VDW		(1 << 4)
+#define USBVISION_DRM_PRM1		0x13
+#define USBVISION_DRM_PRM2		0x14
+#define USBVISION_DRM_PRM3		0x15
+#define USBVISION_DRM_PRM4		0x16
+#define USBVISION_DRM_PRM5		0x17
+#define USBVISION_DRM_PRM6		0x18
+#define USBVISION_DRM_PRM7		0x19
+#define USBVISION_DRM_PRM8		0x1A
+#define USBVISION_VIN_REG1		0x1B
+	#define USBVISION_8_422_SYNC		0x01
+	#define USBVISION_16_422_SYNC		0x02
+	#define USBVISION_VSNC_POL		(1 << 3)
+	#define USBVISION_HSNC_POL		(1 << 4)
+	#define USBVISION_FID_POL		(1 << 5)
+	#define USBVISION_HVALID_PO		(1 << 6)
+	#define USBVISION_VCLK_POL		(1 << 7)
+#define USBVISION_VIN_REG2		0x1C
+	#define USBVISION_AUTO_FID		(1 << 0)
+	#define USBVISION_NONE_INTER		(1 << 1)
+	#define USBVISION_NOHVALID		(1 << 2)
+	#define USBVISION_UV_ID			(1 << 3)
+	#define USBVISION_FIX_2C		(1 << 4)
+	#define USBVISION_SEND_FID		(1 << 5)
+	#define USBVISION_KEEP_BLANK		(1 << 7)
+#define USBVISION_LXSIZE_I		0x1D
+#define USBVISION_MXSIZE_I		0x1E
+#define USBVISION_LYSIZE_I		0x1F
+#define USBVISION_MYSIZE_I		0x20
+#define USBVISION_LX_OFFST		0x21
+#define USBVISION_MX_OFFST		0x22
+#define USBVISION_LY_OFFST		0x23
+#define USBVISION_MY_OFFST		0x24
+#define USBVISION_FRM_RATE		0x25
+#define USBVISION_LXSIZE_O		0x26
+#define USBVISION_MXSIZE_O		0x27
+#define USBVISION_LYSIZE_O		0x28
+#define USBVISION_MYSIZE_O		0x29
+#define USBVISION_FILT_CONT		0x2A
+#define USBVISION_VO_MODE		0x2B
+#define USBVISION_INTRA_CYC		0x2C
+#define USBVISION_STRIP_SZ		0x2D
+#define USBVISION_FORCE_INTRA		0x2E
+#define USBVISION_FORCE_UP		0x2F
+#define USBVISION_BUF_THR		0x30
+#define USBVISION_DVI_YUV		0x31
+#define USBVISION_AUDIO_CONT		0x32
+#define USBVISION_AUD_PK_LEN		0x33
+#define USBVISION_BLK_PK_LEN		0x34
+#define USBVISION_PCM_THR1		0x38
+#define USBVISION_PCM_THR2		0x39
+#define USBVISION_DIST_THR_L		0x3A
+#define USBVISION_DIST_THR_H		0x3B
+#define USBVISION_MAX_DIST_L		0x3C
+#define USBVISION_MAX_DIST_H		0x3D
+#define USBVISION_OP_CODE		0x33
+
+#define MAX_BYTES_PER_PIXEL		4
+
+#define MIN_FRAME_WIDTH			64
+#define MAX_USB_WIDTH			320  //384
+#define MAX_FRAME_WIDTH			320  //384			/*streching sometimes causes crashes*/
+
+#define MIN_FRAME_HEIGHT		48
+#define MAX_USB_HEIGHT			240  //288
+#define MAX_FRAME_HEIGHT		240  //288			/*Streching sometimes causes crashes*/
+
+#define MAX_FRAME_SIZE     		(MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT * MAX_BYTES_PER_PIXEL)
+#define USBVISION_CLIPMASK_SIZE		(MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT / 8) //bytesize of clipmask
+
+#define USBVISION_URB_FRAMES		32
+#define USBVISION_MAX_ISOC_PACKET_SIZE 	959			// NT1003 Specs Document says 1023
+
+#define USBVISION_NUM_HEADERMARKER	20
+#define USBVISION_NUMFRAMES		2
+#define USBVISION_NUMSBUF		2
+
+#define USBVISION_POWEROFF_TIME		3 * (HZ)		// 3 seconds
+
+/* This macro restricts an int variable to an inclusive range */
+#define RESTRICT_TO_RANGE(v,mi,ma) { if ((v) < (mi)) (v) = (mi); else if ((v) > (ma)) (v) = (ma); }
+
+/*
+ * We use macros to do YUV -> RGB conversion because this is
+ * very important for speed and totally unimportant for size.
+ *
+ * YUV -> RGB Conversion
+ * ---------------------
+ *
+ * B = 1.164*(Y-16)		    + 2.018*(V-128)
+ * G = 1.164*(Y-16) - 0.813*(U-128) - 0.391*(V-128)
+ * R = 1.164*(Y-16) + 1.596*(U-128)
+ *
+ * If you fancy integer arithmetics (as you should), hear this:
+ *
+ * 65536*B = 76284*(Y-16)		  + 132252*(V-128)
+ * 65536*G = 76284*(Y-16) -  53281*(U-128) -  25625*(V-128)
+ * 65536*R = 76284*(Y-16) + 104595*(U-128)
+ *
+ * Make sure the output values are within [0..255] range.
+ */
+#define LIMIT_RGB(x) (((x) < 0) ? 0 : (((x) > 255) ? 255 : (x)))
+#define YUV_TO_RGB_BY_THE_BOOK(my,mu,mv,mr,mg,mb) { \
+    int mm_y, mm_yc, mm_u, mm_v, mm_r, mm_g, mm_b; \
+    mm_y = (my) - 16;  \
+    mm_u = (mu) - 128; \
+    mm_v = (mv) - 128; \
+    mm_yc= mm_y * 76284; \
+    mm_b = (mm_yc		+ 132252*mm_v	) >> 16; \
+    mm_g = (mm_yc -  53281*mm_u -  25625*mm_v	) >> 16; \
+    mm_r = (mm_yc + 104595*mm_u			) >> 16; \
+    mb = LIMIT_RGB(mm_b); \
+    mg = LIMIT_RGB(mm_g); \
+    mr = LIMIT_RGB(mm_r); \
+}
+
+
+
+/* Debugging aid */
+#define USBVISION_SAY_AND_WAIT(what) { \
+	wait_queue_head_t wq; \
+	init_waitqueue_head(&wq); \
+	printk(KERN_INFO "Say: %s\n", what); \
+	interruptible_sleep_on_timeout (&wq, HZ*3); \
+}
+
+/*
+ * This macro checks if usbvision is still operational. The 'usbvision'
+ * pointer must be valid, usbvision->dev must be valid, we are not
+ * removing the device and the device has not erred on us.
+ */
+#define USBVISION_IS_OPERATIONAL(udevice) (\
+	(udevice != NULL) && \
+	((udevice)->dev != NULL) && \
+	((udevice)->last_error == 0) && \
+	(!(udevice)->remove_pending))
+
+
+enum ScanState {
+	ScanState_Scanning,	/* Scanning for header */
+	ScanState_Lines		/* Parsing lines */
+};
+
+/* Completion states of the data parser */
+enum ParseState {
+	ParseState_Continue,	/* Just parse next item */
+	ParseState_NextFrame,	/* Frame done, send it to V4L */
+	ParseState_Out,		/* Not enough data for frame */
+	ParseState_EndParse	/* End parsing */
+};
+
+enum FrameState {
+	FrameState_Unused,	/* Unused (no MCAPTURE) */
+	FrameState_Ready,	/* Ready to start grabbing */
+	FrameState_Grabbing,	/* In the process of being grabbed into */
+	FrameState_Done,	/* Finished grabbing, but not been synced yet */
+	FrameState_DoneHold,	/* Are syncing or reading */
+	FrameState_Error,	/* Something bad happened while processing */
+};
+
+enum IsocState {
+	IsocState_InFrame,	/* Isoc packet is member of frame */
+	IsocState_NoFrame,	/* Isoc packet is not member of any frame */
+};
+
+struct usb_device;
+
+struct usbvision_sbuf {
+	char *data;
+	struct urb *urb;
+};
+
+#define USBVISION_MAGIC_1      			0x55
+#define USBVISION_MAGIC_2      			0xAA
+#define USBVISION_HEADER_LENGTH			0x0c
+#define USBVISION_SAA7111_ADDR			0x48
+#define USBVISION_SAA7113_ADDR			0x4a
+#define USBVISION_IIC_LRACK			0x20
+#define USBVISION_IIC_LRNACK			0x30
+#define USBVISION_FRAME_FORMAT_PARAM_INTRA	(1<<7)
+
+static struct usbvision_v4l2_format_st {
+	int		supported;
+	int		bytes_per_pixel;
+	int		depth;
+	int		format;
+	char		*desc;
+} usbvision_v4l2_format[] = {
+  { 1, 1,  8, V4L2_PIX_FMT_GREY    , "GREY" },
+  { 1, 2, 16, V4L2_PIX_FMT_RGB565  , "RGB565" },
+  { 1, 3, 24, V4L2_PIX_FMT_RGB24   , "RGB24" },
+  { 1, 4, 32, V4L2_PIX_FMT_RGB32   , "RGB32" },
+  { 1, 2, 16, V4L2_PIX_FMT_RGB555  , "RGB555" },
+  { 1, 2, 16, V4L2_PIX_FMT_YUYV    , "YUV422" },
+  { 1, 2, 12, V4L2_PIX_FMT_YVU420  , "YUV420P" }, // 1.5 !
+  { 1, 2, 16, V4L2_PIX_FMT_YUV422P , "YUV422P" }
+};
+#define USBVISION_SUPPORTED_PALETTES ARRAY_SIZE(usbvision_v4l2_format)
+
+struct usbvision_frame_header {
+	unsigned char magic_1;				/* 0 magic */
+	unsigned char magic_2;				/* 1  magic */
+	unsigned char headerLength;			/* 2 */
+	unsigned char frameNum;				/* 3 */
+	unsigned char framePhase;			/* 4 */
+	unsigned char frameLatency;			/* 5 */
+	unsigned char dataFormat;			/* 6 */
+	unsigned char formatParam;			/* 7 */
+	unsigned char frameWidthLo;			/* 8 */
+	unsigned char frameWidthHi;			/* 9 */
+	unsigned char frameHeightLo;			/* 10 */
+	unsigned char frameHeightHi;			/* 11 */
+	__u16 frameWidth;				/* 8 - 9 after endian correction*/
+	__u16 frameHeight;				/* 10 - 11 after endian correction*/
+};
+
+struct usbvision_frame {
+	char *data;					/* Frame buffer */
+	struct usbvision_frame_header isocHeader;	/* Header from stream */
+
+	int width;					/* Width application is expecting */
+	int height;					/* Height */
+
+	int frmwidth;					/* Width the frame actually is */
+	int frmheight;					/* Height */
+
+	volatile int grabstate;				/* State of grabbing */
+	int scanstate;					/* State of scanning */
+
+	int curline;					/* Line of frame we're working on */
+
+	long scanlength;				/* uncompressed, raw data length of frame */
+	long bytes_read;				/* amount of scanlength that has been read from data */
+	struct usbvision_v4l2_format_st v4l2_format;	/* format the user needs*/
+	int v4l2_linesize;				/* bytes for one videoline*/
+        struct timeval timestamp;
+	wait_queue_head_t wq;				/* Processes waiting */
+	int sequence;					// How many video frames we send to user
+};
+
+#define CODEC_SAA7113	7113
+#define CODEC_SAA7111	7111
+#define BRIDGE_NT1003	1003
+#define BRIDGE_NT1004	1004
+#define BRIDGE_NT1005   1005
+
+/* Supported Devices: A table for usbvision.c*/
+
+static struct usbvision_device_data_st {
+	int idVendor;
+	int idProduct;
+	int Interface;					/* to handle special interface number like BELKIN and Hauppauge WinTV-USB II */
+	int Codec;
+	int VideoChannels;
+	__u64 VideoNorm;
+	int AudioChannels;
+	int Radio;
+	int vbi;
+	int Tuner;
+	int TunerType;
+	int Vin_Reg1;
+	int Vin_Reg2;
+	int X_Offset;
+	int Y_Offset;
+	int Dvi_yuv;
+	char *ModelString;
+} usbvision_device_data[] = {
+	{0xFFF0, 0xFFF0, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC,  1, 1, 1, 1, TUNER_PHILIPS_NTSC_M,       -1, -1, -1, -1, -1, "Custom Dummy USBVision Device"},  
+	{0x0A6F, 0x0400, -1, CODEC_SAA7113, 4, V4L2_STD_NTSC,  1, 0, 1, 0, 0,                          -1, -1, -1, -1, -1, "Xanboo"}, 
+	{0x050D, 0x0208, -1, CODEC_SAA7113, 2, V4L2_STD_PAL,   1, 0, 1, 0, 0,                          -1, -1,  0,  3,  7, "Belkin USBView II"},
+	{0x0571, 0x0002,  0, CODEC_SAA7111, 2, V4L2_STD_PAL,   0, 0, 1, 0, 0,                          -1, -1, -1, -1,  7, "echoFX InterView Lite"}, 
+	{0x0573, 0x0003, -1, CODEC_SAA7111, 2, V4L2_STD_NTSC,  1, 0, 1, 0, 0,                          -1, -1, -1, -1, -1, "USBGear USBG-V1 resp. HAMA USB"},
+	{0x0573, 0x0400, -1, CODEC_SAA7113, 4, V4L2_STD_NTSC,  0, 0, 1, 0, 0,                          -1, -1,  0,  3,  7, "D-Link V100"},
+	{0x0573, 0x2000, -1, CODEC_SAA7111, 2, V4L2_STD_NTSC,  1, 0, 1, 0, 0,                          -1, -1, -1, -1, -1, "X10 USB Camera"},
+	{0x0573, 0x2d00, -1, CODEC_SAA7111, 2, V4L2_STD_PAL,   1, 0, 1, 0, 0,                          -1, -1, -1,  3,  7, "Osprey 50"}, 
+	{0x0573, 0x2d01, -1, CODEC_SAA7113, 2, V4L2_STD_NTSC,	 0, 0, 1, 0, 0,			         -1, -1,  0,  3,  7, "Hauppauge USB-Live Model 600"},
+	{0x0573, 0x2101, -1, CODEC_SAA7113, 2, V4L2_STD_PAL, 	 2, 0, 1, 0, 0,                          -1, -1,  0,  3,  7, "Zoran Co. PMD (Nogatech) AV-grabber Manhattan"},
+	{0x0573, 0x4100, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC,  1, 1, 1, 1, TUNER_PHILIPS_NTSC_M,       -1, -1, -1, 20, -1, "Nogatech USB-TV (NTSC) FM"},
+    	{0x0573, 0x4110, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC,  1, 1, 1, 1, TUNER_PHILIPS_NTSC_M,       -1, -1, -1, 20, -1, "PNY USB-TV (NTSC) FM"}, 
+	{0x0573, 0x4450,  0, CODEC_SAA7113, 3, V4L2_STD_PAL,   1, 1, 1, 1, TUNER_PHILIPS_PAL,          -1, -1,  0,  3,  7, "PixelView PlayTv-USB PRO (PAL) FM"},
+	{0x0573, 0x4550,  0, CODEC_SAA7113, 3, V4L2_STD_PAL,   1, 1, 1, 1, TUNER_PHILIPS_PAL,          -1, -1,  0,  3,  7, "ZTV ZT-721 2.4GHz USB A/V Receiver"},
+	{0x0573, 0x4d00, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC,  1, 0, 1, 1, TUNER_PHILIPS_NTSC_M,       -1, -1, -1, 20, -1, "Hauppauge WinTv-USB USA"},
+	{0x0573, 0x4d01, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC,  1, 0, 1, 1, TUNER_PHILIPS_NTSC_M,       -1, -1, -1, -1, -1, "Hauppauge WinTv-USB"},
+	{0x0573, 0x4d02, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC,  1, 0, 1, 1, TUNER_PHILIPS_NTSC_M,       -1, -1, -1, -1, -1, "Hauppauge WinTv-USB (NTSC)"},
+	{0x0573, 0x4d03, -1, CODEC_SAA7111, 3, V4L2_STD_SECAM, 1, 0, 1, 1, TUNER_PHILIPS_SECAM,        -1, -1, -1, -1, -1, "Hauppauge WinTv-USB (SECAM) "},
+	{0x0573, 0x4d10, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC,  1, 1, 1, 1, TUNER_PHILIPS_NTSC_M,       -1, -1, -1, -1, -1, "Hauppauge WinTv-USB (NTSC) FM"},
+	{0x0573, 0x4d11, -1, CODEC_SAA7111, 3, V4L2_STD_PAL,   1, 1, 1, 1, TUNER_PHILIPS_PAL,          -1, -1, -1, -1, -1, "Hauppauge WinTv-USB (PAL) FM"},
+	{0x0573, 0x4d12, -1, CODEC_SAA7111, 3, V4L2_STD_PAL,   1, 1, 1, 1, TUNER_PHILIPS_PAL,          -1, -1, -1, -1, -1, "Hauppauge WinTv-USB (PAL) FM"},
+	{0x0573, 0x4d2a,  0, CODEC_SAA7113, 3, V4L2_STD_NTSC,  1, 1, 1, 1, TUNER_MICROTUNE_4049FM5,    -1, -1,  0,  3,  7, "Hauppauge WinTv USB (NTSC) FM Model 602 40201 Rev B285"}, 
+	{0x0573, 0x4d2b,  0, CODEC_SAA7113, 3, V4L2_STD_NTSC,  1, 1, 1, 1, TUNER_MICROTUNE_4049FM5,    -1, -1,  0,  3,  7, "Hauppauge WinTv USB (NTSC) FM Model 602 40201 Rev B282"},
+	{0x0573, 0x4d2c,  0, CODEC_SAA7113, 3, V4L2_STD_PAL,   1, 0, 1, 1, TUNER_PHILIPS_FM1216ME_MK3, -1, -1,  0,  3,  7, "Hauppauge WinTv USB (PAL/SECAM) 40209 Rev E1A5"}, 
+	{0x0573, 0x4d20,  0, CODEC_SAA7113, 3, V4L2_STD_PAL,   1, 1, 1, 1, TUNER_PHILIPS_PAL,          -1, -1,  0,  3,  7, "Hauppauge WinTv-USB II (PAL) FM Model 40201 Rev B226"},
+	{0x0573, 0x4d21,  0, CODEC_SAA7113, 3, V4L2_STD_PAL,   1, 0, 1, 1, TUNER_PHILIPS_PAL,          -1, -1,  0,  3,  7, "Hauppauge WinTv-USB II (PAL)"},
+	{0x0573, 0x4d22,  0, CODEC_SAA7113, 3, V4L2_STD_PAL,   1, 0, 1, 1, TUNER_PHILIPS_PAL,          -1, -1,  0,  3,  7, "Hauppauge WinTv-USB II (PAL) MODEL 566"},
+	{0x0573, 0x4d23, -1, CODEC_SAA7113, 3, V4L2_STD_SECAM, 1, 0, 1, 1, TUNER_PHILIPS_SECAM,        -1, -1,  0,  3,  7, "Hauppauge WinTv-USB (SECAM) 4D23"},
+	{0x0573, 0x4d25, -1, CODEC_SAA7113, 3, V4L2_STD_SECAM, 1, 0, 1, 1, TUNER_PHILIPS_SECAM,        -1, -1,  0,  3,  7, "Hauppauge WinTv-USB (SECAM) Model 40209 Rev B234"},
+	{0x0573, 0x4d26, -1, CODEC_SAA7113, 3, V4L2_STD_SECAM, 1, 0, 1, 1, TUNER_PHILIPS_SECAM,        -1, -1,  0,  3,  7, "Hauppauge WinTv-USB (SECAM) Model 40209 Rev B243"},
+	{0x0573, 0x4d27, -1, CODEC_SAA7113, 3, V4L2_STD_PAL,   1, 0, 1, 1, TUNER_ALPS_TSBE1_PAL,       -1, -1,  0,  3,  7, "Hauppauge WinTv-USB Model 40204 Rev B281"},
+	{0x0573, 0x4d28, -1, CODEC_SAA7113, 3, V4L2_STD_PAL,   1, 0, 1, 1, TUNER_ALPS_TSBE1_PAL,       -1, -1,  0,  3,  7, "Hauppauge WinTv-USB Model 40204 Rev B283"}, 
+	{0x0573, 0x4d29, -1, CODEC_SAA7113, 3, V4L2_STD_PAL,   1, 0, 1, 1, TUNER_PHILIPS_PAL,          -1, -1,  0,  3,  7, "Hauppauge WinTv-USB Model 40205 Rev B298"}, 
+	{0x0573, 0x4d30, -1, CODEC_SAA7113, 3, V4L2_STD_NTSC,  1, 1, 1, 1, TUNER_PHILIPS_NTSC_M,       -1, -1,  0,  3,  7, "Hauppauge WinTv-USB FM Model 40211 Rev B123"},
+	{0x0573, 0x4d31,  0, CODEC_SAA7113, 3, V4L2_STD_PAL,   1, 1, 1, 1, TUNER_PHILIPS_PAL,          -1, -1,  0,  3,  7, "Hauppauge WinTv-USB III (PAL) FM Model 568"},
+        {0x0573, 0x4d32,  0, CODEC_SAA7113, 3, V4L2_STD_PAL,   1, 1, 1, 1, TUNER_PHILIPS_PAL,          -1, -1,  0,  3,  7, "Hauppauge WinTv-USB III (PAL) FM Model 573"},
+	{0x0573, 0x4d35,  0, CODEC_SAA7113, 3, V4L2_STD_PAL,   1, 1, 1, 1, TUNER_MICROTUNE_4049FM5,    -1, -1,  0,  3,  7, "Hauppauge WinTv-USB III (PAL) FM Model 40219 Rev B252"},
+	{0x0573, 0x4d37,  0, CODEC_SAA7113, 3, V4L2_STD_PAL,   1, 1, 1, 1, TUNER_PHILIPS_FM1216ME_MK3, -1, -1,  0,  3,  7, "Hauppauge WinTV USB device Model 40219 Rev E189"},
+	{0x0768, 0x0006, -1, CODEC_SAA7113, 3, V4L2_STD_NTSC,  1, 1, 1, 1, TUNER_PHILIPS_NTSC_M,       -1, -1,  5,  5, -1, "Camtel Technology USB TV Genie Pro FM Model TVB330"},
+	{0x07d0, 0x0001, -1, CODEC_SAA7113, 2, V4L2_STD_PAL,   0, 0, 1, 0, 0,                          -1, -1,  0,  3,  7, "Digital Video Creator I"},
+	{0x07d0, 0x0002, -1, CODEC_SAA7111, 2, V4L2_STD_NTSC,  0, 0, 1, 0, 0,   		         -1, -1, 82, 20,  7, "Global Village GV-007 (NTSC)"},
+	{0x07d0, 0x0003,  0, CODEC_SAA7113, 2, V4L2_STD_NTSC,  0, 0, 1, 0, 0,                          -1, -1,  0,  3,  7, "Dazzle Fusion Model DVC-50 Rev 1 (NTSC)"},
+	{0x07d0, 0x0004,  0, CODEC_SAA7113, 2, V4L2_STD_PAL,   0, 0, 1, 0, 0,                          -1, -1,  0,  3,  7, "Dazzle Fusion Model DVC-80 Rev 1 (PAL)"},
+	{0x07d0, 0x0005,  0, CODEC_SAA7113, 2, V4L2_STD_SECAM, 0, 0, 1, 0, 0,	   		         -1, -1,  0,  3,  7, "Dazzle Fusion Model DVC-90 Rev 1 (SECAM)"}, 
+        {0x2304, 0x010d, -1, CODEC_SAA7111, 3, V4L2_STD_PAL,   1, 0, 0, 1, TUNER_TEMIC_4066FY5_PAL_I,  -1, -1, -1, -1, -1, "Pinnacle Studio PCTV USB (PAL)"},
+	{0x2304, 0x0109, -1, CODEC_SAA7111, 3, V4L2_STD_SECAM, 1, 0, 1, 1, TUNER_PHILIPS_SECAM,        -1, -1, -1, -1, -1, "Pinnacle Studio PCTV USB (SECAM)"},
+	{0x2304, 0x0110, -1, CODEC_SAA7111, 3, V4L2_STD_PAL,   1, 1, 1, 1, TUNER_PHILIPS_PAL,          -1, -1,128, 23, -1, "Pinnacle Studio PCTV USB (PAL) FM"},
+	{0x2304, 0x0111, -1, CODEC_SAA7111, 3, V4L2_STD_PAL,   1, 0, 1, 1, TUNER_PHILIPS_PAL,          -1, -1, -1, -1, -1, "Miro PCTV USB"},
+	{0x2304, 0x0112, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC,  1, 1, 1, 1, TUNER_PHILIPS_NTSC_M,       -1, -1, -1, -1, -1, "Pinnacle Studio PCTV USB (NTSC) FM"},
+	{0x2304, 0x0210, -1, CODEC_SAA7113, 3, V4L2_STD_PAL,   1, 1, 1, 1, TUNER_TEMIC_4009FR5_PAL,    -1, -1,  0,  3,  7, "Pinnacle Studio PCTV USB (PAL) FM"},
+	{0x2304, 0x0212, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC,  1, 1, 1, 1, TUNER_TEMIC_4039FR5_NTSC,   -1, -1,  0,  3,  7, "Pinnacle Studio PCTV USB (NTSC) FM"},
+	{0x2304, 0x0214, -1, CODEC_SAA7113, 3, V4L2_STD_PAL,   1, 1, 1, 1, TUNER_TEMIC_4009FR5_PAL,    -1, -1,  0,  3,  7, "Pinnacle Studio PCTV USB (PAL) FM"},
+	{0x2304, 0x0300, -1, CODEC_SAA7113, 2, V4L2_STD_NTSC,  1, 0, 1, 0, 0,                          -1, -1,  0,  3,  7, "Pinnacle Studio Linx Video input cable (NTSC)"},
+	{0x2304, 0x0301, -1, CODEC_SAA7113, 2, V4L2_STD_PAL,   1, 0, 1, 0, 0,                          -1, -1,  0,  3,  7, "Pinnacle Studio Linx Video input cable (PAL)"}, 
+	{0x2304, 0x0419, -1, CODEC_SAA7113, 3, V4L2_STD_PAL,   1, 1, 1, 1, TUNER_TEMIC_4009FR5_PAL,    -1, -1,  0,  3,  7, "Pinnacle PCTV Bungee USB (PAL) FM"},
+	{0x2400, 0x4200, -1, CODEC_SAA7111, 3, VIDEO_MODE_NTSC,  1, 0, 1, 1, TUNER_PHILIPS_NTSC_M,       -1, -1, -1, -1, -1, "Hauppauge WinTv-USB"},
+	{}  /* Terminating entry */
+};
+
+
+/* Supported Devices: A table for the usb.c*/
+
+static struct usb_device_id usbvision_table [] = {
+	{ USB_DEVICE(0xFFF0, 0xFFF0) },  /* Custom Dummy USBVision Device */
+	{ USB_DEVICE(0x0A6F, 0x0400) },  /* Xanboo */ 
+	{ USB_DEVICE(0x050d, 0x0208) },  /* Belkin USBView II */
+	{ USB_DEVICE(0x0571, 0x0002) },  /* echoFX InterView Lite */
+	{ USB_DEVICE(0x0573, 0x0003) },  /* USBGear USBG-V1 */
+	{ USB_DEVICE(0x0573, 0x0400) },  /* D-Link V100 */
+	{ USB_DEVICE(0x0573, 0x2000) },  /* X10 USB Camera */
+	{ USB_DEVICE(0x0573, 0x2d00) },  /* Osprey 50 */ 
+	{ USB_DEVICE(0x0573, 0x2d01) },  /* Hauppauge USB-Live Model 600 */
+	{ USB_DEVICE(0x0573, 0x2101) },  /* Zoran Co. PMD (Nogatech) AV-grabber Manhattan */
+	{ USB_DEVICE(0x0573, 0x4100) },  /* Nogatech USB-TV FM (NTSC) */
+	{ USB_DEVICE(0x0573, 0x4110) },  /* PNY USB-TV (NTSC) FM */
+	{ USB_DEVICE(0x0573, 0x4450) },  /* PixelView PlayTv-USB PRO (PAL) FM */
+	{ USB_DEVICE(0x0573, 0x4550) },  /* ZTV ZT-721 2.4GHz USB A/V Receiver */
+	{ USB_DEVICE(0x0573, 0x4d00) },  /* Hauppauge WinTv-USB USA */
+	{ USB_DEVICE(0x0573, 0x4d01) },  /* Hauppauge WinTv-USB */
+	{ USB_DEVICE(0x0573, 0x4d02) },  /* Hauppauge WinTv-USB UK */
+	{ USB_DEVICE(0x0573, 0x4d03) },  /* Hauppauge WinTv-USB France */
+	{ USB_DEVICE(0x0573, 0x4d10) },  /* Hauppauge WinTv-USB with FM USA radio */
+	{ USB_DEVICE(0x0573, 0x4d11) },  /* Hauppauge WinTv-USB (PAL) with FM radio */
+	{ USB_DEVICE(0x0573, 0x4d12) },  /* Hauppauge WinTv-USB UK with FM Radio */
+	{ USB_DEVICE(0x0573, 0x4d2a) },  /* Hauppague WinTv USB Model 602 40201 Rev B285 */ 
+	{ USB_DEVICE(0x0573, 0x4d2b) },  /* Hauppague WinTv USB Model 602 40201 Rev B282 */
+	{ USB_DEVICE(0x0573, 0x4d2c) },  /* Hauppague WinTv USB Model 40209 Rev. E1A5 PAL*/ 
+	{ USB_DEVICE(0x0573, 0x4d20) },  /* Hauppauge WinTv-USB II (PAL) FM Model 40201 Rev B226 */
+	{ USB_DEVICE(0x0573, 0x4d21) },  /* Hauppauge WinTv-USB II (PAL) with FM radio*/
+	{ USB_DEVICE(0x0573, 0x4d22) },  /* Hauppauge WinTv-USB II (PAL) Model 566 */
+	{ USB_DEVICE(0x0573, 0x4d23) },  /* Hauppauge WinTv-USB France 4D23*/
+	{ USB_DEVICE(0x0573, 0x4d25) },  /* Hauppauge WinTv-USB Model 40209 rev B234 */
+	{ USB_DEVICE(0x0573, 0x4d26) },  /* Hauppauge WinTv-USB Model 40209 Rev B243 */
+	{ USB_DEVICE(0x0573, 0x4d27) },  /* Hauppauge WinTv-USB Model 40204 Rev B281 */
+	{ USB_DEVICE(0x0573, 0x4d28) },  /* Hauppauge WinTv-USB Model 40204 Rev B283 */
+	{ USB_DEVICE(0x0573, 0x4d29) },  /* Hauppauge WinTv-USB Model 40205 Rev B298 */ 
+	{ USB_DEVICE(0x0573, 0x4d30) },  /* Hauppauge WinTv-USB FM Model 40211 Rev B123 */
+	{ USB_DEVICE(0x0573, 0x4d31) },  /* Hauppauge WinTv-USB III (PAL) with FM radio Model 568 */
+	{ USB_DEVICE(0x0573, 0x4d32) },  /* Hauppauge WinTv-USB III (PAL) FM Model 573 */
+	{ USB_DEVICE(0x0573, 0x4d35) },  /* Hauppauge WinTv-USB III (SECAM) FM Model 40219 Rev B252 */
+	{ USB_DEVICE(0x0573, 0x4d37) },  /* Hauppauge WinTv-USB Model 40219 Rev E189 */
+	{ USB_DEVICE(0x0768, 0x0006) },  /* Camtel Technology USB TV Genie Pro FM Model TVB330 */
+	{ USB_DEVICE(0x07d0, 0x0001) },  /* Digital Video Creator I */
+	{ USB_DEVICE(0x07d0, 0x0002) },  /* Global Village GV-007 (NTSC) */
+	{ USB_DEVICE(0x07d0, 0x0003) },  /* Dazzle Fusion Model DVC-50 Rev 1 (NTSC) */
+	{ USB_DEVICE(0x07d0, 0x0004) },  /* Dazzle Fusion Model DVC-80 Rev 1 (PAL) */
+	{ USB_DEVICE(0x07d0, 0x0005) },  /* Dazzle Fusion Model DVC-90 Rev 1 (SECAM) */ 
+	{ USB_DEVICE(0x2304, 0x010d) },  /* Pinnacle Studio PCTV USB (PAL) */
+	{ USB_DEVICE(0x2304, 0x0109) },  /* Pinnacle Studio PCTV USB (SECAM) */
+	{ USB_DEVICE(0x2304, 0x0110) },  /* Pinnacle Studio PCTV USB (PAL) */
+	{ USB_DEVICE(0x2304, 0x0111) },  /* Miro PCTV USB */
+	{ USB_DEVICE(0x2304, 0x0112) },  /* Pinnacle Studio PCTV USB (NTSC) with FM radio */
+	{ USB_DEVICE(0x2304, 0x0210) },  /* Pinnacle Studio PCTV USB (PAL) with FM radio */
+	{ USB_DEVICE(0x2304, 0x0212) },  /* Pinnacle Studio PCTV USB (NTSC) with FM radio */
+	{ USB_DEVICE(0x2304, 0x0214) },  /* Pinnacle Studio PCTV USB (PAL) with FM radio */
+	{ USB_DEVICE(0x2304, 0x0300) },  /* Pinnacle Studio Linx Video input cable (NTSC) */
+	{ USB_DEVICE(0x2304, 0x0301) },  /* Pinnacle Studio Linx Video input cable (PAL) */ 
+	{ USB_DEVICE(0x2304, 0x0419) },  /* Pinnacle PCTV Bungee USB (PAL) FM */
+
+	{ USB_DEVICE(0x2400, 0x4200) },  /* Hauppauge WinTv-USB2 Model 42012 */
+
+	{ }  /* Terminating entry */
+};
+
+
+#define USBVISION_I2C_CLIENTS_MAX		8
+
+struct usb_usbvision {
+	struct video_device *vdev;         				/* Video Device */
+	struct video_device *rdev;               			/* Radio Device */
+	struct video_device *vbi; 					/* VBI Device   */
+	struct video_audio audio_dev;	        			/* Current audio params */
+
+	/* i2c Declaration Section*/
+	struct i2c_adapter i2c_adap;
+	struct i2c_algo_usb_data i2c_algo;
+	struct i2c_client i2c_client;
+	int i2c_state, i2c_ok;
+	struct i2c_client *i2c_clients[USBVISION_I2C_CLIENTS_MAX];
+
+	struct urb *ctrlUrb;
+	unsigned char ctrlUrbBuffer[8];
+	int ctrlUrbBusy;
+	struct usb_ctrlrequest ctrlUrbSetup;
+	wait_queue_head_t ctrlUrb_wq;					// Processes waiting
+	struct semaphore ctrlUrbLock;
+
+	int have_tuner;
+	int tuner_type;
+	int bridgeType;							// NT1003, NT1004, NT1005
+	int channel;
+	int radio;
+	int video_inputs;						// # of inputs
+	unsigned long freq;
+	int AudioMute;
+	int AudioChannel;
+	int isocMode;							// format of video data for the usb isoc-transfer
+	unsigned int nr;						// Number of the device < MAX_USBVISION
+
+	/* Device structure */
+	struct usb_device *dev;
+	unsigned char iface;						/* Video interface number */
+	unsigned char ifaceAltActive, ifaceAltInactive;			/* Alt settings */
+	unsigned char Vin_Reg2_Preset;
+	struct semaphore lock;
+	struct timer_list powerOffTimer;
+	struct work_struct powerOffWork;
+	int power;							/* is the device powered on? */
+	int user;							/* user count for exclusive use */
+	int usbvision_used;						/* Is this structure in use? */
+	int initialized;						/* Had we already sent init sequence? */
+	int DevModel;							/* What type of USBVISION device we got? */
+	int streaming;							/* Are we streaming Isochronous? */
+	int last_error;							/* What calamity struck us? */
+	int curwidth;							/* width of the frame the device is currently set to*/
+	int curheight;      						/* height of the frame the device is currently set to*/
+	int stretch_width;						/* stretch-factor for frame width (from usb to screen)*/
+	int stretch_height;						/* stretch-factor for frame height (from usb to screen)*/
+	char *fbuf;							/* Videodev buffer area for mmap*/
+	int max_frame_size;						/* Bytes in one video frame */
+	int fbuf_size;							/* Videodev buffer size */
+	int curFrameNum;						// number of current frame in frame buffer mode
+	struct usbvision_frame *curFrame;				// pointer to current frame, set by usbvision_find_header
+	struct usbvision_frame frame[USBVISION_NUMFRAMES];		// frame buffer
+	int curSbufNum;							// number of current receiving sbuf
+	struct usbvision_sbuf sbuf[USBVISION_NUMSBUF];			// S buffering
+	volatile int remove_pending;					/* If set then about to exit */
+
+	/* Scratch space from the Isochronous Pipe.*/
+	unsigned char *scratch;
+	int scratch_read_ptr;
+	int scratch_write_ptr;
+	int scratch_headermarker[USBVISION_NUM_HEADERMARKER];
+	int scratch_headermarker_read_ptr;
+	int scratch_headermarker_write_ptr;
+	int isocstate;
+        /* color controls */
+	int saturation;
+	int hue;
+	int brightness;
+        int contrast;
+	int depth;
+	struct usbvision_v4l2_format_st palette;
+
+	struct v4l2_capability vcap;					/* Video capabilities */
+	struct v4l2_input input;					/* May be used for tuner support */
+	unsigned char video_endp;					/* 0x82 for USBVISION devices based */
+
+	// Overlay stuff:
+        struct v4l2_framebuffer vid_buf;
+	struct v4l2_format vid_win;
+	int vid_buf_valid;						// Status: video buffer is valid (set)
+	int vid_win_valid;						// Status: video window is valid (set)
+	int	overlay;						/*Status: Are we overlaying? */
+	unsigned int 	clipmask[USBVISION_CLIPMASK_SIZE / 4];
+	unsigned char   *overlay_base;					/* Virtual base address of video buffer */
+	unsigned char   *overlay_win;					/* virt start address of overlay window */
+	struct usbvision_frame overlay_frame;
+
+	// Decompression stuff:
+	unsigned char *IntraFrameBuffer;				/* Buffer for reference frame */
+	int BlockPos; 							//for test only
+	int requestIntra;						// 0 = normal; 1 = intra frame is requested;
+	int lastIsocFrameNum;						// check for lost isoc frames
+	int isocPacketSize;						// need to calculate usedBandwidth
+	int usedBandwidth;						// used bandwidth 0-100%, need to set comprLevel
+	int comprLevel;							// How strong (100) or weak (0) is compression
+	int lastComprLevel;						// How strong (100) or weak (0) was compression
+	int usb_bandwidth;						/* Mbit/s */
+
+	/* /proc entries, relative to /proc/video/usbvision/ */
+	struct proc_dir_entry *proc_devdir;		/* Per-device proc directory */
+	struct proc_dir_entry *proc_info;		/* <minor#>/info entry */
+	struct proc_dir_entry *proc_register;		/* <minor#>/register entry */
+	struct proc_dir_entry *proc_freq; 		/* <minor#>/freq entry */ 
+	struct proc_dir_entry *proc_input; 		/* <minor#>/input entry */ 
+	struct proc_dir_entry *proc_frame;		/* <minor#>/frame entry */
+	struct proc_dir_entry *proc_button;		/* <minor#>/button entry */
+	struct proc_dir_entry *proc_control;		/* <minor#>/control entry */
+
+	/* Statistics that can be overlayed on the screen */
+	unsigned long isocUrbCount;			// How many URBs we received so far
+	unsigned long urb_length;			/* Length of last URB */
+	unsigned long isocDataCount;			/* How many bytes we received */
+	unsigned long header_count;			/* How many frame headers we found */
+	unsigned long scratch_ovf_count;		/* How many times we overflowed scratch */
+	unsigned long isocSkipCount;			/* How many empty ISO packets received */
+	unsigned long isocErrCount;			/* How many bad ISO packets received */
+	unsigned long isocPacketCount;			// How many packets we totally got
+	unsigned long timeInIrq;			// How long do we need for interrupt
+	int isocMeasureBandwidthCount;
+	int frame_num;					// How many video frames we send to user
+	int maxStripLen;				// How big is the biggest strip
+	int comprBlockPos;
+	int stripLenErrors;				// How many times was BlockPos greater than StripLen
+	int stripMagicErrors;
+	int stripLineNumberErrors;
+	int ComprBlockTypes[4];
+};
+
+#endif									/* __LINUX_USBVISION_H */
+

drivers/media/video/usbvision/usbvision_ioctl.h

+/* 
+ * USBVISION_IOCTL.H
+ *  IOCTL for usbvision
+ *
+ * Copyright (c) 1999-2005 Joerg Heckenbach <joerg@heckenbach-aw.de>
+ *
+ * This module is part of usbvision driver project.
+ * Updates to driver completed by Dwaine P. Garden
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+struct usbvision_reg {
+	unsigned char addr;
+	unsigned char value;
+};
+
+#define UVIOCGREG		_IOWR('u',240,struct usbvision_reg)		// get register
+#define UVIOCSREG		_IOW('u',241,struct usbvision_reg)		// set register
+#define UVIOCSVINM		_IOW('u',242,int)						// set usbvision vin_mode
+