V4L/DVB (12291): b2c2: fix frontends compiled into kernel

A recent patch didn't take into account that frontends can be compiled into
the kernel.  Or that frontends compiled as modules can't be used by the
b2c2 driver if it is not a module itself.

Some frontends require multiple drivers, e.g. a demod driver and a tuner
driver.  The code for the frontend support was getting added if the demod
driver was available.  Change this to also require any needed tuner or SEC
drivers as well.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb/b2c2/flexcop-fe-tuner.c

@@ -20,8 +20,14 @@
 #include "tuner-simple.h"
 #include "stv0297.h"
 
+
+/* Can we use the specified front-end?  Remember that if we are compiled
+ * into the kernel we can't call code that's in modules.  */
+#define FE_SUPPORTED(fe) (defined(CONFIG_DVB_##fe) || \
+	(defined(CONFIG_DVB_##fe##_MODULE) && defined(MODULE)))
+
 /* lnb control */
-#if defined(CONFIG_DVB_MT312_MODULE) || defined(CONFIG_DVB_STV0299_MODULE)
+#if FE_SUPPORTED(MT312) || FE_SUPPORTED(STV0299)
 static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
 {
 	struct flexcop_device *fc = fe->dvb->priv;
@@ -49,8 +55,7 @@ static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage
 }
 #endif
 
-#if defined(CONFIG_DVB_S5H1420_MODULE) || defined(CONFIG_DVB_STV0299_MODULE) \
-	|| defined(CONFIG_DVB_MT312_MODULE)
+#if FE_SUPPORTED(S5H1420) || FE_SUPPORTED(STV0299) || FE_SUPPORTED(MT312)
 static int flexcop_sleep(struct dvb_frontend* fe)
 {
 	struct flexcop_device *fc = fe->dvb->priv;
@@ -61,7 +66,7 @@ static int flexcop_sleep(struct dvb_frontend* fe)
 #endif
 
 /* SkyStar2 DVB-S rev 2.3 */
-#if defined(CONFIG_DVB_MT312_MODULE)
+#if FE_SUPPORTED(MT312)
 static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
 {
 /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
@@ -193,10 +198,12 @@ static int skystar2_rev23_attach(struct flexcop_device *fc,
 	}
 	return 0;
 }
+#else
+#define skystar2_rev23_attach NULL
 #endif
 
 /* SkyStar2 DVB-S rev 2.6 */
-#if defined(CONFIG_DVB_STV0299_MODULE)
+#if FE_SUPPORTED(STV0299)
 static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe,
 	u32 srate, u32 ratio)
 {
@@ -321,10 +328,12 @@ static int skystar2_rev26_attach(struct flexcop_device *fc,
 	}
 	return 0;
 }
+#else
+#define skystar2_rev26_attach NULL
 #endif
 
 /* SkyStar2 DVB-S rev 2.7 */
-#if defined(CONFIG_DVB_S5H1420_MODULE)
+#if FE_SUPPORTED(S5H1420) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_ITD1000)
 static struct s5h1420_config skystar2_rev2_7_s5h1420_config = {
 	.demod_address = 0x53,
 	.invert = 1,
@@ -385,10 +394,12 @@ fail:
 	fc->fc_i2c_adap[0].no_base_addr = 0;
 	return 0;
 }
+#else
+#define skystar2_rev27_attach NULL
 #endif
 
 /* SkyStar2 rev 2.8 */
-#if defined(CONFIG_DVB_CX24123_MODULE)
+#if FE_SUPPORTED(CX24123) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_CX24113)
 static struct cx24123_config skystar2_rev2_8_cx24123_config = {
 	.demod_address = 0x55,
 	.dont_use_pll = 1,
@@ -433,10 +444,12 @@ static int skystar2_rev28_attach(struct flexcop_device *fc,
 	 * IR-receiver (PIC16F818) - but the card has no input for that ??? */
 	return 1;
 }
+#else
+#define skystar2_rev28_attach NULL
 #endif
 
 /* AirStar DVB-T */
-#if defined(CONFIG_DVB_MT352_MODULE)
+#if FE_SUPPORTED(MT352)
 static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe)
 {
 	static u8 mt352_clock_config[] = { 0x89, 0x18, 0x2d };
@@ -495,10 +508,12 @@ static int airstar_dvbt_attach(struct flexcop_device *fc,
 	}
 	return 0;
 }
+#else
+#define airstar_dvbt_attach NULL
 #endif
 
 /* AirStar ATSC 1st generation */
-#if defined(CONFIG_DVB_BCM3510_MODULE)
+#if FE_SUPPORTED(BCM3510)
 static int flexcop_fe_request_firmware(struct dvb_frontend *fe,
 	const struct firmware **fw, char* name)
 {
@@ -517,10 +532,12 @@ static int airstar_atsc1_attach(struct flexcop_device *fc,
 	fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c);
 	return fc->fe != NULL;
 }
+#else
+#define airstar_atsc1_attach NULL
 #endif
 
 /* AirStar ATSC 2nd generation */
-#if defined(CONFIG_DVB_NXT200X_MODULE)
+#if FE_SUPPORTED(NXT200X) && FE_SUPPORTED(PLL)
 static struct nxt200x_config samsung_tbmv_config = {
 	.demod_address = 0x0a,
 };
@@ -535,10 +552,12 @@ static int airstar_atsc2_attach(struct flexcop_device *fc,
 	return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL,
 			    DVB_PLL_SAMSUNG_TBMV);
 }
+#else
+#define airstar_atsc2_attach NULL
 #endif
 
 /* AirStar ATSC 3rd generation */
-#if defined(CONFIG_DVB_LGDT330X_MODULE)
+#if FE_SUPPORTED(LGDT330X)
 static struct lgdt330x_config air2pc_atsc_hd5000_config = {
 	.demod_address       = 0x59,
 	.demod_chip          = LGDT3303,
@@ -556,10 +575,12 @@ static int airstar_atsc3_attach(struct flexcop_device *fc,
 	return !!dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
 			    TUNER_LG_TDVS_H06XF);
 }
+#else
+#define airstar_atsc3_attach NULL
 #endif
 
 /* CableStar2 DVB-C */
-#if defined(CONFIG_DVB_STV0297_MODULE)
+#if FE_SUPPORTED(STV0297)
 static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe,
 		struct dvb_frontend_parameters *fep)
 {
@@ -698,39 +719,23 @@ static int cablestar2_attach(struct flexcop_device *fc,
 	fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
 	return 1;
 }
+#else
+#define cablestar2_attach NULL
 #endif
 
 static struct {
 	flexcop_device_type_t type;
 	int (*attach)(struct flexcop_device *, struct i2c_adapter *);
 } flexcop_frontends[] = {
-#if defined(CONFIG_DVB_S5H1420_MODULE)
 	{ FC_SKY_REV27, skystar2_rev27_attach },
-#endif
-#if defined(CONFIG_DVB_CX24123_MODULE)
 	{ FC_SKY_REV28, skystar2_rev28_attach },
-#endif
-#if defined(CONFIG_DVB_STV0299_MODULE)
 	{ FC_SKY_REV26, skystar2_rev26_attach },
-#endif
-#if defined(CONFIG_DVB_MT352_MODULE)
 	{ FC_AIR_DVBT, airstar_dvbt_attach },
-#endif
-#if defined(CONFIG_DVB_NXT200X_MODULE)
 	{ FC_AIR_ATSC2, airstar_atsc2_attach },
-#endif
-#if defined(CONFIG_DVB_LGDT330X_MODULE)
 	{ FC_AIR_ATSC3, airstar_atsc3_attach },
-#endif
-#if defined(CONFIG_DVB_BCM3510_MODULE)
 	{ FC_AIR_ATSC1, airstar_atsc1_attach },
-#endif
-#if defined(CONFIG_DVB_STV0297_MODULE)
 	{ FC_CABLE, cablestar2_attach },
-#endif
-#if defined(CONFIG_DVB_MT312_MODULE)
 	{ FC_SKY_REV23, skystar2_rev23_attach },
-#endif
 };
 
 /* try to figure out the frontend */
@@ -738,6 +743,8 @@ int flexcop_frontend_init(struct flexcop_device *fc)
 {
 	int i;
 	for (i = 0; i < ARRAY_SIZE(flexcop_frontends); i++) {
+		if (!flexcop_frontends[i].attach)
+			continue;
 		/* type needs to be set before, because of some workarounds
 		 * done based on the probed card type */
 		fc->dev_type = flexcop_frontends[i].type;