drm/i915: enable DisplayPort support on IGDNG

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

drivers/gpu/drm/i915/i915_reg.h

@@ -1444,6 +1444,7 @@
 #define   DP_CLOCK_OUTPUT_ENABLE	(1 << 13)
 
 #define   DP_SCRAMBLING_DISABLE		(1 << 12)
+#define   DP_SCRAMBLING_DISABLE_IGDNG	(1 << 7)
 
 /** limit RGB values to avoid confusing TVs */
 #define   DP_COLOR_RANGE_16_235		(1 << 8)
@@ -2210,4 +2211,28 @@
 #define PCH_PP_OFF_DELAYS	0xc720c
 #define PCH_PP_DIVISOR		0xc7210
 
+#define PCH_DP_B		0xe4100
+#define PCH_DPB_AUX_CH_CTL	0xe4110
+#define PCH_DPB_AUX_CH_DATA1	0xe4114
+#define PCH_DPB_AUX_CH_DATA2	0xe4118
+#define PCH_DPB_AUX_CH_DATA3	0xe411c
+#define PCH_DPB_AUX_CH_DATA4	0xe4120
+#define PCH_DPB_AUX_CH_DATA5	0xe4124
+
+#define PCH_DP_C		0xe4200
+#define PCH_DPC_AUX_CH_CTL	0xe4210
+#define PCH_DPC_AUX_CH_DATA1	0xe4214
+#define PCH_DPC_AUX_CH_DATA2	0xe4218
+#define PCH_DPC_AUX_CH_DATA3	0xe421c
+#define PCH_DPC_AUX_CH_DATA4	0xe4220
+#define PCH_DPC_AUX_CH_DATA5	0xe4224
+
+#define PCH_DP_D		0xe4300
+#define PCH_DPD_AUX_CH_CTL	0xe4310
+#define PCH_DPD_AUX_CH_DATA1	0xe4314
+#define PCH_DPD_AUX_CH_DATA2	0xe4318
+#define PCH_DPD_AUX_CH_DATA3	0xe431c
+#define PCH_DPD_AUX_CH_DATA4	0xe4320
+#define PCH_DPD_AUX_CH_DATA5	0xe4324
+
 #endif /* _I915_REG_H_ */

drivers/gpu/drm/i915/intel_display.c

@@ -268,6 +268,9 @@ intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 static bool
 intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
 		      int target, int refclk, intel_clock_t *best_clock);
+static bool
+intel_find_pll_igdng_dp(const intel_limit_t *, struct drm_crtc *crtc,
+		      int target, int refclk, intel_clock_t *best_clock);
 
 static const intel_limit_t intel_limits_i8xx_dvo = {
         .dot = { .min = I8XX_DOT_MIN,		.max = I8XX_DOT_MAX },
@@ -751,6 +754,30 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 	return found;
 }
 
+static bool
+intel_find_pll_igdng_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
+		      int target, int refclk, intel_clock_t *best_clock)
+{
+	struct drm_device *dev = crtc->dev;
+	intel_clock_t clock;
+	if (target < 200000) {
+		clock.n = 1;
+		clock.p1 = 2;
+		clock.p2 = 10;
+		clock.m1 = 12;
+		clock.m2 = 9;
+	} else {
+		clock.n = 2;
+		clock.p1 = 1;
+		clock.p2 = 10;
+		clock.m1 = 14;
+		clock.m2 = 8;
+	}
+	intel_clock(dev, refclk, &clock);
+	memcpy(best_clock, &clock, sizeof(intel_clock_t));
+	return true;
+}
+
 static bool
 intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 			int target, int refclk, intel_clock_t *best_clock)
@@ -763,6 +790,10 @@ intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 	int err_most = 47;
 	found = false;
 
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
+		return intel_find_pll_igdng_dp(limit, crtc, target,
+					       refclk, best_clock);
+
 	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
 		if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
 		    LVDS_CLKB_POWER_UP)
@@ -2136,6 +2167,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	int lvds_reg = LVDS;
 	u32 temp;
 	int sdvo_pixel_multiply;
+	int target_clock;
 
 	drm_vblank_pre_modeset(dev, pipe);
 
@@ -2218,11 +2250,18 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	}
 
 	/* FDI link */
-	if (IS_IGDNG(dev))
+	if (IS_IGDNG(dev)) {
+		/* DP over FDI requires target mode clock
+		   instead of link clock */
+		if (is_dp)
+			target_clock = mode->clock;
+		else
+			target_clock = adjusted_mode->clock;
 		igdng_compute_m_n(3, 4, /* lane num 4 */
-				adjusted_mode->clock,
+				target_clock,
 				270000, /* lane clock */
 				&m_n);
+	}
 
 	if (IS_IGD(dev))
 		fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2;
@@ -3050,6 +3089,8 @@ static void intel_setup_outputs(struct drm_device *dev)
 			found = 0;
 			if (!found)
 				intel_hdmi_init(dev, HDMIB);
+			if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
+				intel_dp_init(dev, PCH_DP_B);
 		}
 
 		if (I915_READ(HDMIC) & PORT_DETECTED)
@@ -3058,6 +3099,12 @@ static void intel_setup_outputs(struct drm_device *dev)
 		if (I915_READ(HDMID) & PORT_DETECTED)
 			intel_hdmi_init(dev, HDMID);
 
+		if (I915_READ(PCH_DP_C) & DP_DETECTED)
+			intel_dp_init(dev, PCH_DP_C);
+
+		if (I915_READ(PCH_DP_D) & DP_DETECTED)
+			intel_dp_init(dev, PCH_DP_D);
+
 	} else if (IS_I9XX(dev)) {
 		int found;
 		u32 reg;

drivers/gpu/drm/i915/intel_dp.c

@@ -206,7 +206,12 @@ intel_dp_aux_ch(struct intel_output *intel_output,
 	 * and would like to run at 2MHz. So, take the
 	 * hrawclk value and divide by 2 and use that
 	 */
+	/* IGDNG: input clock fixed at 125Mhz, so aux_bit_clk always 62 */
+	if (IS_IGDNG(dev))
+		aux_clock_divider = 62;
+	else
 		aux_clock_divider = intel_hrawclk(dev) / 2;
+
 	/* Must try at least 3 times according to DP spec */
 	for (try = 0; try < 5; try++) {
 		/* Load the send data into the aux channel data registers */
@@ -493,6 +498,23 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
 	intel_dp_compute_m_n(3, lane_count,
 			     mode->clock, adjusted_mode->clock, &m_n);
 
+	if (IS_IGDNG(dev)) {
+		if (intel_crtc->pipe == 0) {
+			I915_WRITE(TRANSA_DATA_M1,
+				   ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+				   m_n.gmch_m);
+			I915_WRITE(TRANSA_DATA_N1, m_n.gmch_n);
+			I915_WRITE(TRANSA_DP_LINK_M1, m_n.link_m);
+			I915_WRITE(TRANSA_DP_LINK_N1, m_n.link_n);
+		} else {
+			I915_WRITE(TRANSB_DATA_M1,
+				   ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+				   m_n.gmch_m);
+			I915_WRITE(TRANSB_DATA_N1, m_n.gmch_n);
+			I915_WRITE(TRANSB_DP_LINK_M1, m_n.link_m);
+			I915_WRITE(TRANSB_DP_LINK_N1, m_n.link_n);
+		}
+	} else {
 		if (intel_crtc->pipe == 0) {
 			I915_WRITE(PIPEA_GMCH_DATA_M,
 				   ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
@@ -510,6 +532,7 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
 			I915_WRITE(PIPEB_DP_LINK_M, m_n.link_m);
 			I915_WRITE(PIPEB_DP_LINK_N, m_n.link_n);
 		}
+	}
 }
 
 static void
@@ -935,6 +958,12 @@ intel_dp_link_down(struct intel_output *intel_output, uint32_t DP)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
 
+	DP &= ~DP_LINK_TRAIN_MASK;
+	I915_WRITE(dp_priv->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE);
+	POSTING_READ(dp_priv->output_reg);
+
+	udelay(17000);
+
 	I915_WRITE(dp_priv->output_reg, DP & ~DP_PORT_EN);
 	POSTING_READ(dp_priv->output_reg);
 }
@@ -978,6 +1007,24 @@ intel_dp_check_link_status(struct intel_output *intel_output)
 		intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration);
 }
 
+static enum drm_connector_status
+igdng_dp_detect(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+	enum drm_connector_status status;
+
+	status = connector_status_disconnected;
+	if (intel_dp_aux_native_read(intel_output,
+				     0x000, dp_priv->dpcd,
+				     sizeof (dp_priv->dpcd)) == sizeof (dp_priv->dpcd))
+	{
+		if (dp_priv->dpcd[0] != 0)
+			status = connector_status_connected;
+	}
+	return status;
+}
+
 /**
  * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection.
  *
@@ -996,6 +1043,9 @@ intel_dp_detect(struct drm_connector *connector)
 
 	dp_priv->has_audio = false;
 
+	if (IS_IGDNG(dev))
+		return igdng_dp_detect(connector);
+
 	temp = I915_READ(PORT_HOTPLUG_EN);
 
 	I915_WRITE(PORT_HOTPLUG_EN,
@@ -1106,6 +1156,7 @@ intel_dp_init(struct drm_device *dev, int output_reg)
 	struct drm_connector *connector;
 	struct intel_output *intel_output;
 	struct intel_dp_priv *dp_priv;
+	const char *name = NULL;
 
 	intel_output = kcalloc(sizeof(struct intel_output) + 
 			       sizeof(struct intel_dp_priv), 1, GFP_KERNEL);
@@ -1139,9 +1190,22 @@ intel_dp_init(struct drm_device *dev, int output_reg)
 	drm_sysfs_connector_add(connector);
 
 	/* Set up the DDC bus. */
-	intel_dp_i2c_init(intel_output,
-			  (output_reg == DP_B) ? "DPDDC-B" :
-			  (output_reg == DP_C) ? "DPDDC-C" : "DPDDC-D");
+	switch (output_reg) {
+		case DP_B:
+		case PCH_DP_B:
+			name = "DPDDC-B";
+			break;
+		case DP_C:
+		case PCH_DP_C:
+			name = "DPDDC-C";
+			break;
+		case DP_D:
+		case PCH_DP_D:
+			name = "DPDDC-D";
+			break;
+	}
+
+	intel_dp_i2c_init(intel_output, name);
 	intel_output->ddc_bus = &dp_priv->adapter;
 	intel_output->hot_plug = intel_dp_hot_plug;