Skip to content

L
linux-davinci
Commit 5db8dcc9 authored by Solomon Peachy's avatar Solomon Peachy Committed by Greg Kroah-Hartman
Browse files
Options

Staging: wlan-ng: Remove AP-only code from MLME functions. 

It is not needed in this driver.
Signed-off-by: default avatarSolomon Peachy <pizza@shaftnet.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent f980c178
Hide whitespace changes
Inline Side-by-side
Showing with 173 additions and 1140 deletions
drivers/staging/wlan-ng/hfa384x.h
View file @ 5db8dcc9
......@@ -2547,7 +2547,6 @@ typedef struct hfa384x
UINT presniff_port_type;
UINT16 presniff_wepflags;
UINT32 dot11_desired_bss_type;
int ap; /* AP flag: 0 - Station, 1 - Access Point. */
int dbmadjust;
......
drivers/staging/wlan-ng/p80211metadef.h
View file @ 5db8dcc9
......@@ -72,25 +72,6 @@
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(2) | \
P80211DID_MKITEM(2) | 0x00000000)
#define DIDmsg_dot11req_powermgmt \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(3))
#define DIDmsg_dot11req_powermgmt_powermgmtmode \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(3) | \
P80211DID_MKITEM(1) | 0x00000000)
#define DIDmsg_dot11req_powermgmt_wakeup \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(3) | \
P80211DID_MKITEM(2) | 0x00000000)
#define DIDmsg_dot11req_powermgmt_receivedtims \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(3) | \
P80211DID_MKITEM(3) | 0x00000000)
#define DIDmsg_dot11req_powermgmt_resultcode \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(3) | \
P80211DID_MKITEM(4) | 0x00000000)
#define DIDmsg_dot11req_scan \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(4))
......@@ -301,119 +282,6 @@
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(5) | \
P80211DID_MKITEM(40) | 0x00000000)
#define DIDmsg_dot11req_join \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(6))
#define DIDmsg_dot11req_join_bssid \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(6) | \
P80211DID_MKITEM(1) | 0x00000000)
#define DIDmsg_dot11req_join_joinfailuretimeout \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(6) | \
P80211DID_MKITEM(2) | 0x00000000)
#define DIDmsg_dot11req_join_basicrate1 \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(6) | \
P80211DID_MKITEM(3) | 0x00000000)
#define DIDmsg_dot11req_join_basicrate2 \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(6) | \
P80211DID_MKITEM(4) | 0x00000000)
#define DIDmsg_dot11req_join_basicrate3 \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(6) | \
P80211DID_MKITEM(5) | 0x00000000)
#define DIDmsg_dot11req_join_basicrate4 \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(6) | \
P80211DID_MKITEM(6) | 0x00000000)
#define DIDmsg_dot11req_join_basicrate5 \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(6) | \
P80211DID_MKITEM(7) | 0x00000000)
#define DIDmsg_dot11req_join_basicrate6 \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(6) | \
P80211DID_MKITEM(8) | 0x00000000)
#define DIDmsg_dot11req_join_basicrate7 \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(6) | \
P80211DID_MKITEM(9) | 0x00000000)
#define DIDmsg_dot11req_join_basicrate8 \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(6) | \
P80211DID_MKITEM(10) | 0x00000000)
#define DIDmsg_dot11req_join_operationalrate1 \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(6) | \
P80211DID_MKITEM(11) | 0x00000000)
#define DIDmsg_dot11req_join_operationalrate2 \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(6) | \
P80211DID_MKITEM(12) | 0x00000000)
#define DIDmsg_dot11req_join_operationalrate3 \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(6) | \
P80211DID_MKITEM(13) | 0x00000000)
#define DIDmsg_dot11req_join_operationalrate4 \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(6) | \
P80211DID_MKITEM(14) | 0x00000000)
#define DIDmsg_dot11req_join_operationalrate5 \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(6) | \
P80211DID_MKITEM(15) | 0x00000000)
#define DIDmsg_dot11req_join_operationalrate6 \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(6) | \
P80211DID_MKITEM(16) | 0x00000000)
#define DIDmsg_dot11req_join_operationalrate7 \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(6) | \
P80211DID_MKITEM(17) | 0x00000000)
#define DIDmsg_dot11req_join_operationalrate8 \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(6) | \
P80211DID_MKITEM(18) | 0x00000000)
#define DIDmsg_dot11req_join_resultcode \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(6) | \
P80211DID_MKITEM(19) | 0x00000000)
#define DIDmsg_dot11req_authenticate \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(7))
#define DIDmsg_dot11req_authenticate_peerstaaddress \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(7) | \
P80211DID_MKITEM(1) | 0x00000000)
#define DIDmsg_dot11req_authenticate_authenticationtype \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(7) | \
P80211DID_MKITEM(2) | 0x00000000)
#define DIDmsg_dot11req_authenticate_authenticationfailuretimeout \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(7) | \
P80211DID_MKITEM(3) | 0x00000000)
#define DIDmsg_dot11req_authenticate_resultcode \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(7) | \
P80211DID_MKITEM(4) | 0x00000000)
#define DIDmsg_dot11req_deauthenticate \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(8))
#define DIDmsg_dot11req_deauthenticate_peerstaaddress \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(8) | \
P80211DID_MKITEM(1) | 0x00000000)
#define DIDmsg_dot11req_deauthenticate_reasoncode \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(8) | \
P80211DID_MKITEM(2) | 0x00000000)
#define DIDmsg_dot11req_deauthenticate_resultcode \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(8) | \
P80211DID_MKITEM(3) | 0x00000000)
#define DIDmsg_dot11req_associate \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(9))
......@@ -445,52 +313,6 @@
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(9) | \
P80211DID_MKITEM(7) | 0x00000000)
#define DIDmsg_dot11req_reassociate \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(10))
#define DIDmsg_dot11req_reassociate_newapaddress \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(10) | \
P80211DID_MKITEM(1) | 0x00000000)
#define DIDmsg_dot11req_reassociate_reassociatefailuretimeout \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(10) | \
P80211DID_MKITEM(2) | 0x00000000)
#define DIDmsg_dot11req_reassociate_cfpollable \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(10) | \
P80211DID_MKITEM(3) | 0x00000000)
#define DIDmsg_dot11req_reassociate_cfpollreq \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(10) | \
P80211DID_MKITEM(4) | 0x00000000)
#define DIDmsg_dot11req_reassociate_privacy \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(10) | \
P80211DID_MKITEM(5) | 0x00000000)
#define DIDmsg_dot11req_reassociate_listeninterval \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(10) | \
P80211DID_MKITEM(6) | 0x00000000)
#define DIDmsg_dot11req_reassociate_resultcode \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(10) | \
P80211DID_MKITEM(7) | 0x00000000)
#define DIDmsg_dot11req_disassociate \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(11))
#define DIDmsg_dot11req_disassociate_peerstaaddress \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(11) | \
P80211DID_MKITEM(1) | 0x00000000)
#define DIDmsg_dot11req_disassociate_reasoncode \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(11) | \
P80211DID_MKITEM(2) | 0x00000000)
#define DIDmsg_dot11req_disassociate_resultcode \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(11) | \
P80211DID_MKITEM(3) | 0x00000000)
#define DIDmsg_dot11req_reset \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(12))
......@@ -1189,13 +1011,6 @@
(P80211DID_MKSECTION(5) | \
P80211DID_MKGROUP(16) | \
P80211DID_MKITEM(2) | 0x00000000)
#define DIDmsg_p2req_enable \
(P80211DID_MKSECTION(5) | \
P80211DID_MKGROUP(19))
#define DIDmsg_p2req_enable_resultcode \
(P80211DID_MKSECTION(5) | \
P80211DID_MKGROUP(19) | \
P80211DID_MKITEM(1) | 0x00000000)
#define DIDmib_cat_dot11smt \
P80211DID_MKSECTION(1)
#define DIDmib_dot11smt_p80211Table \
......
drivers/staging/wlan-ng/p80211metastruct.h
View file @ 5db8dcc9
......@@ -66,17 +66,6 @@ typedef struct p80211msg_dot11req_mibset
p80211item_uint32_t resultcode ;
} __WLAN_ATTRIB_PACK__ p80211msg_dot11req_mibset_t;
typedef struct p80211msg_dot11req_powermgmt
{
UINT32 msgcode ;
UINT32 msglen ;
UINT8 devname[WLAN_DEVNAMELEN_MAX] ;
p80211item_uint32_t powermgmtmode ;
p80211item_uint32_t wakeup ;
p80211item_uint32_t receivedtims ;
p80211item_uint32_t resultcode ;
} __WLAN_ATTRIB_PACK__ p80211msg_dot11req_powermgmt_t;
typedef struct p80211msg_dot11req_scan
{
UINT32 msgcode ;
......@@ -147,56 +136,6 @@ typedef struct p80211msg_dot11req_scan_results
p80211item_uint32_t supprate8 ;
} __WLAN_ATTRIB_PACK__ p80211msg_dot11req_scan_results_t;
typedef struct p80211msg_dot11req_join
{
UINT32 msgcode ;
UINT32 msglen ;
UINT8 devname[WLAN_DEVNAMELEN_MAX] ;
p80211item_pstr6_t bssid ;
UINT8 pad_5C[1] ;
p80211item_uint32_t joinfailuretimeout ;
p80211item_uint32_t basicrate1 ;
p80211item_uint32_t basicrate2 ;
p80211item_uint32_t basicrate3 ;
p80211item_uint32_t basicrate4 ;
p80211item_uint32_t basicrate5 ;
p80211item_uint32_t basicrate6 ;
p80211item_uint32_t basicrate7 ;
p80211item_uint32_t basicrate8 ;
p80211item_uint32_t operationalrate1 ;
p80211item_uint32_t operationalrate2 ;
p80211item_uint32_t operationalrate3 ;
p80211item_uint32_t operationalrate4 ;
p80211item_uint32_t operationalrate5 ;
p80211item_uint32_t operationalrate6 ;
p80211item_uint32_t operationalrate7 ;
p80211item_uint32_t operationalrate8 ;
p80211item_uint32_t resultcode ;
} __WLAN_ATTRIB_PACK__ p80211msg_dot11req_join_t;
typedef struct p80211msg_dot11req_authenticate
{
UINT32 msgcode ;
UINT32 msglen ;
UINT8 devname[WLAN_DEVNAMELEN_MAX] ;
p80211item_pstr6_t peerstaaddress ;
UINT8 pad_6C[1] ;
p80211item_uint32_t authenticationtype ;
p80211item_uint32_t authenticationfailuretimeout ;
p80211item_uint32_t resultcode ;
} __WLAN_ATTRIB_PACK__ p80211msg_dot11req_authenticate_t;
typedef struct p80211msg_dot11req_deauthenticate
{
UINT32 msgcode ;
UINT32 msglen ;
UINT8 devname[WLAN_DEVNAMELEN_MAX] ;
p80211item_pstr6_t peerstaaddress ;
UINT8 pad_7C[1] ;
p80211item_uint32_t reasoncode ;
p80211item_uint32_t resultcode ;
} __WLAN_ATTRIB_PACK__ p80211msg_dot11req_deauthenticate_t;
typedef struct p80211msg_dot11req_associate
{
UINT32 msgcode ;
......@@ -212,31 +151,6 @@ typedef struct p80211msg_dot11req_associate
p80211item_uint32_t resultcode ;
} __WLAN_ATTRIB_PACK__ p80211msg_dot11req_associate_t;
typedef struct p80211msg_dot11req_reassociate
{
UINT32 msgcode ;
UINT32 msglen ;
UINT8 devname[WLAN_DEVNAMELEN_MAX] ;
p80211item_pstr6_t newapaddress ;
UINT8 pad_9C[1] ;
p80211item_uint32_t reassociatefailuretimeout ;
p80211item_uint32_t cfpollable ;
p80211item_uint32_t cfpollreq ;
p80211item_uint32_t privacy ;
p80211item_uint32_t listeninterval ;
p80211item_uint32_t resultcode ;
} __WLAN_ATTRIB_PACK__ p80211msg_dot11req_reassociate_t;
typedef struct p80211msg_dot11req_disassociate
{
UINT32 msgcode ;
UINT32 msglen ;
UINT8 devname[WLAN_DEVNAMELEN_MAX] ;
p80211item_pstr6_t peerstaaddress ;
UINT8 pad_10C[1] ;
p80211item_uint32_t reasoncode ;
p80211item_uint32_t resultcode ;
} __WLAN_ATTRIB_PACK__ p80211msg_dot11req_disassociate_t;
typedef struct p80211msg_dot11req_reset
{
......@@ -609,12 +523,4 @@ typedef struct p80211msg_p2req_dump_state
p80211item_uint32_t resultcode ;
} __WLAN_ATTRIB_PACK__ p80211msg_p2req_dump_state_t;
typedef struct p80211msg_p2req_enable
{
UINT32 msgcode ;
UINT32 msglen ;
UINT8 devname[WLAN_DEVNAMELEN_MAX] ;
p80211item_uint32_t resultcode ;
} __WLAN_ATTRIB_PACK__ p80211msg_p2req_enable_t;
#endif
drivers/staging/wlan-ng/prism2mgmt.c
View file @ 5db8dcc9
......@@ -97,89 +97,12 @@
#include "hfa384x.h"
#include "prism2mgmt.h"
/*================================================================*/
/* Local Constants */
/*================================================================*/
/* Local Macros */
/* Converts 802.11 format rate specifications to prism2 */
#define p80211rate_to_p2bit(n) ((((n)&~BIT7) == 2) ? BIT0 : \
(((n)&~BIT7) == 4) ? BIT1 : \
(((n)&~BIT7) == 11) ? BIT2 : \
(((n)&~BIT7) == 22) ? BIT3 : 0)
/*================================================================*/
/* Local Types */
/*================================================================*/
/* Local Static Definitions */
/*================================================================*/
/* Local Function Declarations */
/*================================================================*/
/* Function Definitions */
/*----------------------------------------------------------------
* prism2mgmt_powermgmt
*
* Set the power management state of this station's MAC.
*
* Arguments:
* wlandev wlan device structure
* msgp ptr to msg buffer
*
* Returns:
* 0 success and done
* <0 success, but we're waiting for something to finish.
* >0 an error occurred while handling the message.
* Side effects:
*
* Call context:
* process thread (usually)
* interrupt
----------------------------------------------------------------*/
int prism2mgmt_powermgmt(wlandevice_t *wlandev, void *msgp)
{
int result = 0;
hfa384x_t *hw = wlandev->priv;
p80211msg_dot11req_powermgmt_t *msg = msgp;
DBFENTER;
if (!hw->ap) {
/*** STATION ***/
/*
* Set CNFPMENABLED (on or off)
* Set CNFMULTICASTRX (if PM on, otherwise clear)
* Spout a notice stating that SleepDuration and
* HoldoverDuration and PMEPS also have an impact.
*/
/* Powermgmt is currently unsupported for STA */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
} else {
/*** ACCESS POINT ***/
/* Powermgmt is never supported for AP */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
}
DBFEXIT;
return result;
}
/*----------------------------------------------------------------
* prism2mgmt_scan
*
......@@ -217,13 +140,6 @@ int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
DBFENTER;
if (hw->ap) {
WLAN_LOG_ERROR("Prism2 in AP mode cannot perform scans.\n");
result = 1;
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
goto exit;
}
/* gatekeeper check */
if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
hw->ident_sta_fw.minor,
......@@ -468,12 +384,6 @@ int prism2mgmt_scan_results(wlandevice_t *wlandev, void *msgp)
req->resultcode.status = P80211ENUM_msgitem_status_data_ok;
if (hw->ap) {
result = 1;
req->resultcode.data = P80211ENUM_resultcode_not_supported;
goto exit;
}
if (! hw->scanresults) {
WLAN_LOG_ERROR("dot11req_scan_results can only be used after a successful dot11req_scan.\n");
result = 2;
......@@ -600,55 +510,6 @@ int prism2mgmt_scan_results(wlandevice_t *wlandev, void *msgp)
return result;
}
/*----------------------------------------------------------------
* prism2mgmt_join
*
* Join a BSS whose BSS description was previously obtained with
* a scan.
*
* Arguments:
* wlandev wlan device structure
* msgp ptr to msg buffer
*
* Returns:
* 0 success and done
* <0 success, but we're waiting for something to finish.
* >0 an error occurred while handling the message.
* Side effects:
*
* Call context:
* process thread (usually)
* interrupt
----------------------------------------------------------------*/
int prism2mgmt_join(wlandevice_t *wlandev, void *msgp)
{
int result = 0;
hfa384x_t *hw = wlandev->priv;
p80211msg_dot11req_join_t *msg = msgp;
DBFENTER;
if (!hw->ap) {
/*** STATION ***/
/* TODO: Implement after scan */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
} else {
/*** ACCESS POINT ***/
/* Never supported by APs */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
}
DBFEXIT;
return result;
}
/*----------------------------------------------------------------
* prism2mgmt_p2_join
*
......@@ -680,380 +541,162 @@ int prism2mgmt_p2_join(wlandevice_t *wlandev, void *msgp)
hfa384x_JoinRequest_data_t joinreq;
DBFENTER;
if (!hw->ap) {
wlandev->macmode = WLAN_MACMODE_NONE;
/*** STATION ***/
/* Set the PortType */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_success;
/* ess port */
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, 1);
if ( result ) {
WLAN_LOG_ERROR("Failed to set Port Type\n");
goto failed;
}
/* Set the auth type */
if ( msg->authtype.data == P80211ENUM_authalg_sharedkey ) {
reg = HFA384x_CNFAUTHENTICATION_SHAREDKEY;
} else {
reg = HFA384x_CNFAUTHENTICATION_OPENSYSTEM;
}
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAUTHENTICATION, reg);
if ( result ) {
WLAN_LOG_ERROR("Failed to set Authentication\n");
goto failed;
}
/* Turn off all roaming */
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFROAMINGMODE, 3);
if ( result ) {
WLAN_LOG_ERROR("Failed to Turn off Roaming\n");
goto failed;
}
/* Basic rates */
reg = 0;
if ( msg->basicrate1.status == P80211ENUM_msgitem_status_data_ok ) {
reg = p80211rate_to_p2bit(msg->basicrate1.data);
}
if ( msg->basicrate2.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->basicrate2.data);
}
if ( msg->basicrate3.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->basicrate3.data);
}
if ( msg->basicrate4.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->basicrate4.data);
}
if ( msg->basicrate5.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->basicrate5.data);
}
if ( msg->basicrate6.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->basicrate6.data);
}
if ( msg->basicrate7.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->basicrate7.data);
}
if ( msg->basicrate8.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->basicrate8.data);
}
if( reg == 0)
reg = 0x03;
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFBASICRATES, reg);
if ( result ) {
WLAN_LOG_ERROR("Failed to set basicrates=%d.\n", reg);
goto failed;
}
/* Operational rates (supprates and txratecontrol) */
reg = 0;
if ( msg->operationalrate1.status == P80211ENUM_msgitem_status_data_ok ) {
reg = p80211rate_to_p2bit(msg->operationalrate1.data);
}
if ( msg->operationalrate2.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->operationalrate2.data);
}
if ( msg->operationalrate3.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->operationalrate3.data);
}
if ( msg->operationalrate4.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->operationalrate4.data);
}
if ( msg->operationalrate5.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->operationalrate5.data);
}
if ( msg->operationalrate6.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->operationalrate6.data);
}
if ( msg->operationalrate7.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->operationalrate7.data);
}
if ( msg->operationalrate8.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->operationalrate8.data);
}
if( reg == 0)
reg = 0x0f;
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFSUPPRATES, reg);
if ( result ) {
WLAN_LOG_ERROR("Failed to set supprates=%d.\n", reg);
goto failed;
}
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, reg);
if ( result ) {
WLAN_LOG_ERROR("Failed to set txrates=%d.\n", reg);
goto failed;
}
/* Set the ssid */
memset(bytebuf, 0, 256);
pstr = (p80211pstrd_t*)&(msg->ssid.data);
prism2mgmt_pstr2bytestr(p2bytestr, pstr);
result = hfa384x_drvr_setconfig(
hw, HFA384x_RID_CNFDESIREDSSID,
bytebuf, HFA384x_RID_CNFDESIREDSSID_LEN);
if ( result ) {
WLAN_LOG_ERROR("Failed to set SSID\n");
goto failed;
}
/* Enable the Port */
result = hfa384x_cmd_enable(hw, 0);
if ( result ) {
WLAN_LOG_ERROR("Enable macport failed, result=%d.\n", result);
goto failed;
}
/* Fill in the join request */
joinreq.channel = msg->channel.data;
memcpy( joinreq.bssid, ((unsigned char *) &msg->bssid.data) + 1, WLAN_BSSID_LEN);
hw->joinreq = joinreq;
hw->join_ap = 1;
/* Send the join request */
result = hfa384x_drvr_setconfig( hw,
HFA384x_RID_JOINREQUEST,
&joinreq, HFA384x_RID_JOINREQUEST_LEN);
if(result != 0) {
WLAN_LOG_ERROR("Join request failed, result=%d.\n", result);
goto failed;
}
} else {
wlandev->macmode = WLAN_MACMODE_NONE;
/*** ACCESS POINT ***/
/* Set the PortType */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_success;
/* Never supported by APs */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
/* ess port */
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, 1);
if ( result ) {
WLAN_LOG_ERROR("Failed to set Port Type\n");
goto failed;
}
goto done;
failed:
WLAN_LOG_DEBUG(1, "Failed to set a config option, result=%d\n", result);
msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
done:
result = 0;
DBFEXIT;
return result;
}
/*----------------------------------------------------------------
* prism2mgmt_authenticate
*
* Station should be begin an authentication exchange.
*
* Arguments:
* wlandev wlan device structure
* msgp ptr to msg buffer
*
* Returns:
* 0 success and done
* <0 success, but we're waiting for something to finish.
* >0 an error occurred while handling the message.
* Side effects:
*
* Call context:
* process thread (usually)
* interrupt
----------------------------------------------------------------*/
int prism2mgmt_authenticate(wlandevice_t *wlandev, void *msgp)
{
int result = 0;
hfa384x_t *hw = wlandev->priv;
p80211msg_dot11req_authenticate_t *msg = msgp;
DBFENTER;
if (!hw->ap) {
/*** STATION ***/
/* TODO: Decide how we're going to handle this one w/ Prism2 */
/* It could be entertaining since Prism2 doesn't have */
/* an explicit way to control this */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
/* Set the auth type */
if ( msg->authtype.data == P80211ENUM_authalg_sharedkey ) {
reg = HFA384x_CNFAUTHENTICATION_SHAREDKEY;
} else {
/*** ACCESS POINT ***/
/* Never supported by APs */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
reg = HFA384x_CNFAUTHENTICATION_OPENSYSTEM;
}
DBFEXIT;
return result;
}
/*----------------------------------------------------------------
* prism2mgmt_deauthenticate
*
* Send a deauthenticate notification.
*
* Arguments:
* wlandev wlan device structure
* msgp ptr to msg buffer
*
* Returns:
* 0 success and done
* <0 success, but we're waiting for something to finish.
* >0 an error occurred while handling the message.
* Side effects:
*
* Call context:
* process thread (usually)
* interrupt
----------------------------------------------------------------*/
int prism2mgmt_deauthenticate(wlandevice_t *wlandev, void *msgp)
{
int result = 0;
hfa384x_t *hw = wlandev->priv;
p80211msg_dot11req_deauthenticate_t *msg = msgp;
DBFENTER;
if (!hw->ap) {
/*** STATION ***/
/* TODO: Decide how we're going to handle this one w/ Prism2 */
/* It could be entertaining since Prism2 doesn't have */
/* an explicit way to control this */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
} else {
/*** ACCESS POINT ***/
hfa384x_drvr_handover(hw, msg->peerstaaddress.data.data);
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_success;
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAUTHENTICATION, reg);
if ( result ) {
WLAN_LOG_ERROR("Failed to set Authentication\n");
goto failed;
}
DBFEXIT;
return result;
}
/*----------------------------------------------------------------
* prism2mgmt_associate
*
* Associate with an ESS.
*
* Arguments:
* wlandev wlan device structure
* msgp ptr to msg buffer
*
* Returns:
* 0 success and done
* <0 success, but we're waiting for something to finish.
* >0 an error occurred while handling the message.
* Side effects:
*
* Call context:
* process thread (usually)
* interrupt
----------------------------------------------------------------*/
int prism2mgmt_associate(wlandevice_t *wlandev, void *msgp)
{
hfa384x_t *hw = wlandev->priv;
int result = 0;
p80211msg_dot11req_associate_t *msg = msgp;
DBFENTER;
if (!hw->ap) {
/*** STATION ***/
#if 0
/* Set the TxRates */
reg = 0x000f;
hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, reg);
#endif
/* Set the PortType */
/* ess port */
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, 1);
/* Enable the Port */
hfa384x_drvr_enable(hw, 0);
/* Set the resultcode */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_success;
} else {
/* Turn off all roaming */
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFROAMINGMODE, 3);
if ( result ) {
WLAN_LOG_ERROR("Failed to Turn off Roaming\n");
goto failed;
}
/*** ACCESS POINT ***/
/* Basic rates */
reg = 0;
if ( msg->basicrate1.status == P80211ENUM_msgitem_status_data_ok ) {
reg = p80211rate_to_p2bit(msg->basicrate1.data);
}
if ( msg->basicrate2.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->basicrate2.data);
}
if ( msg->basicrate3.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->basicrate3.data);
}
if ( msg->basicrate4.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->basicrate4.data);
}
if ( msg->basicrate5.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->basicrate5.data);
}
if ( msg->basicrate6.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->basicrate6.data);
}
if ( msg->basicrate7.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->basicrate7.data);
}
if ( msg->basicrate8.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->basicrate8.data);
}
if( reg == 0)
reg = 0x03;
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFBASICRATES, reg);
if ( result ) {
WLAN_LOG_ERROR("Failed to set basicrates=%d.\n", reg);
goto failed;
}
/* Never supported on AP */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
/* Operational rates (supprates and txratecontrol) */
reg = 0;
if ( msg->operationalrate1.status == P80211ENUM_msgitem_status_data_ok ) {
reg = p80211rate_to_p2bit(msg->operationalrate1.data);
}
if ( msg->operationalrate2.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->operationalrate2.data);
}
if ( msg->operationalrate3.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->operationalrate3.data);
}
if ( msg->operationalrate4.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->operationalrate4.data);
}
if ( msg->operationalrate5.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->operationalrate5.data);
}
if ( msg->operationalrate6.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->operationalrate6.data);
}
if ( msg->operationalrate7.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->operationalrate7.data);
}
if ( msg->operationalrate8.status == P80211ENUM_msgitem_status_data_ok ) {
reg |= p80211rate_to_p2bit(msg->operationalrate8.data);
}
if( reg == 0)
reg = 0x0f;
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFSUPPRATES, reg);
if ( result ) {
WLAN_LOG_ERROR("Failed to set supprates=%d.\n", reg);
goto failed;
}
DBFEXIT;
return result;
}
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, reg);
if ( result ) {
WLAN_LOG_ERROR("Failed to set txrates=%d.\n", reg);
goto failed;
}
/*----------------------------------------------------------------
* prism2mgmt_reassociate
*
* Renew association because of a BSS change.
*
* Arguments:
* wlandev wlan device structure
* msgp ptr to msg buffer
*
* Returns:
* 0 success and done
* <0 success, but we're waiting for something to finish.
* >0 an error occurred while handling the message.
* Side effects:
*
* Call context:
* process thread (usually)
* interrupt
----------------------------------------------------------------*/
int prism2mgmt_reassociate(wlandevice_t *wlandev, void *msgp)
{
int result = 0;
hfa384x_t *hw = wlandev->priv;
p80211msg_dot11req_reassociate_t *msg = msgp;
DBFENTER;
/* Set the ssid */
memset(bytebuf, 0, 256);
pstr = (p80211pstrd_t*)&(msg->ssid.data);
prism2mgmt_pstr2bytestr(p2bytestr, pstr);
result = hfa384x_drvr_setconfig(
hw, HFA384x_RID_CNFDESIREDSSID,
bytebuf, HFA384x_RID_CNFDESIREDSSID_LEN);
if ( result ) {
WLAN_LOG_ERROR("Failed to set SSID\n");
goto failed;
}
if (!hw->ap) {
/* Enable the Port */
result = hfa384x_cmd_enable(hw, 0);
if ( result ) {
WLAN_LOG_ERROR("Enable macport failed, result=%d.\n", result);
goto failed;
}
/*** STATION ***/
/* Fill in the join request */
joinreq.channel = msg->channel.data;
memcpy( joinreq.bssid, ((unsigned char *) &msg->bssid.data) + 1, WLAN_BSSID_LEN);
hw->joinreq = joinreq;
hw->join_ap = 1;
/* TODO: Not supported yet...not sure how we're going to do it */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
} else {
/* Send the join request */
result = hfa384x_drvr_setconfig( hw,
HFA384x_RID_JOINREQUEST,
&joinreq, HFA384x_RID_JOINREQUEST_LEN);
if(result != 0) {
WLAN_LOG_ERROR("Join request failed, result=%d.\n", result);
goto failed;
}
/*** ACCESS POINT ***/
goto done;
failed:
WLAN_LOG_DEBUG(1, "Failed to set a config option, result=%d\n", result);
msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
/* Never supported on AP */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
}
done:
result = 0;
DBFEXIT;
return result;
}
/*----------------------------------------------------------------
* prism2mgmt_disassociate
* prism2mgmt_associate
*
* Send a disassociation notification.
* Associate with an ESS.
*
* Arguments:
* wlandev wlan device structure
......@@ -1069,33 +712,34 @@ int prism2mgmt_reassociate(wlandevice_t *wlandev, void *msgp)
* process thread (usually)
* interrupt
----------------------------------------------------------------*/
int prism2mgmt_disassociate(wlandevice_t *wlandev, void *msgp)
int prism2mgmt_associate(wlandevice_t *wlandev, void *msgp)
{
int result = 0;
hfa384x_t *hw = wlandev->priv;
p80211msg_dot11req_disassociate_t *msg = msgp;
int result = 0;
p80211msg_dot11req_associate_t *msg = msgp;
DBFENTER;
if (!hw->ap) {
#if 0
/* Set the TxRates */
reg = 0x000f;
hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, reg);
#endif
/*** STATION ***/
/* Set the PortType */
/* ess port */
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, 1);
/* TODO: Not supported yet...not sure how to do it */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
} else {
/* Enable the Port */
hfa384x_drvr_enable(hw, 0);
/*** ACCESS POINT ***/
hfa384x_drvr_handover(hw, msg->peerstaaddress.data.data);
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_success;
}
/* Set the resultcode */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_success;
DBFEXIT;
return result;
}
/*----------------------------------------------------------------
* prism2mgmt_reset
*
......@@ -1189,7 +833,6 @@ int prism2mgmt_start(wlandevice_t *wlandev, void *msgp)
p80211pstrd_t *pstr;
UINT8 bytebuf[80];
hfa384x_bytestr_t *p2bytestr = (hfa384x_bytestr_t*)bytebuf;
hfa384x_PCFInfo_data_t *pcfinfo = (hfa384x_PCFInfo_data_t*)bytebuf;
UINT16 word;
DBFENTER;
......@@ -1198,166 +841,41 @@ int prism2mgmt_start(wlandevice_t *wlandev, void *msgp)
/* Set the SSID */
memcpy(&wlandev->ssid, &msg->ssid.data, sizeof(msg->ssid.data));
if (!hw->ap) {
/*** ADHOC IBSS ***/
/* see if current f/w is less than 8c3 */
if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
hw->ident_sta_fw.minor,
hw->ident_sta_fw.variant) <
HFA384x_FIRMWARE_VERSION(0,8,3)) {
/* Ad-Hoc not quite supported on Prism2 */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
goto done;
}
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
/*** STATION ***/
/* Set the REQUIRED config items */
/* SSID */
pstr = (p80211pstrd_t*)&(msg->ssid.data);
prism2mgmt_pstr2bytestr(p2bytestr, pstr);
result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFOWNSSID,
bytebuf, HFA384x_RID_CNFOWNSSID_LEN);
if ( result ) {
WLAN_LOG_ERROR("Failed to set CnfOwnSSID\n");
goto failed;
}
result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFDESIREDSSID,
bytebuf, HFA384x_RID_CNFDESIREDSSID_LEN);
if ( result ) {
WLAN_LOG_ERROR("Failed to set CnfDesiredSSID\n");
goto failed;
}
/* bsstype - we use the default in the ap firmware */
/* IBSS port */
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, 0);
/* beacon period */
word = msg->beaconperiod.data;
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAPBCNINT, word);
if ( result ) {
WLAN_LOG_ERROR("Failed to set beacon period=%d.\n", word);
goto failed;
}
/* dschannel */
word = msg->dschannel.data;
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFOWNCHANNEL, word);
if ( result ) {
WLAN_LOG_ERROR("Failed to set channel=%d.\n", word);
goto failed;
}
/* Basic rates */
word = p80211rate_to_p2bit(msg->basicrate1.data);
if ( msg->basicrate2.status == P80211ENUM_msgitem_status_data_ok ) {
word |= p80211rate_to_p2bit(msg->basicrate2.data);
}
if ( msg->basicrate3.status == P80211ENUM_msgitem_status_data_ok ) {
word |= p80211rate_to_p2bit(msg->basicrate3.data);
}
if ( msg->basicrate4.status == P80211ENUM_msgitem_status_data_ok ) {
word |= p80211rate_to_p2bit(msg->basicrate4.data);
}
if ( msg->basicrate5.status == P80211ENUM_msgitem_status_data_ok ) {
word |= p80211rate_to_p2bit(msg->basicrate5.data);
}
if ( msg->basicrate6.status == P80211ENUM_msgitem_status_data_ok ) {
word |= p80211rate_to_p2bit(msg->basicrate6.data);
}
if ( msg->basicrate7.status == P80211ENUM_msgitem_status_data_ok ) {
word |= p80211rate_to_p2bit(msg->basicrate7.data);
}
if ( msg->basicrate8.status == P80211ENUM_msgitem_status_data_ok ) {
word |= p80211rate_to_p2bit(msg->basicrate8.data);
}
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFBASICRATES, word);
if ( result ) {
WLAN_LOG_ERROR("Failed to set basicrates=%d.\n", word);
goto failed;
}
/* Operational rates (supprates and txratecontrol) */
word = p80211rate_to_p2bit(msg->operationalrate1.data);
if ( msg->operationalrate2.status == P80211ENUM_msgitem_status_data_ok ) {
word |= p80211rate_to_p2bit(msg->operationalrate2.data);
}
if ( msg->operationalrate3.status == P80211ENUM_msgitem_status_data_ok ) {
word |= p80211rate_to_p2bit(msg->operationalrate3.data);
}
if ( msg->operationalrate4.status == P80211ENUM_msgitem_status_data_ok ) {
word |= p80211rate_to_p2bit(msg->operationalrate4.data);
}
if ( msg->operationalrate5.status == P80211ENUM_msgitem_status_data_ok ) {
word |= p80211rate_to_p2bit(msg->operationalrate5.data);
}
if ( msg->operationalrate6.status == P80211ENUM_msgitem_status_data_ok ) {
word |= p80211rate_to_p2bit(msg->operationalrate6.data);
}
if ( msg->operationalrate7.status == P80211ENUM_msgitem_status_data_ok ) {
word |= p80211rate_to_p2bit(msg->operationalrate7.data);
}
if ( msg->operationalrate8.status == P80211ENUM_msgitem_status_data_ok ) {
word |= p80211rate_to_p2bit(msg->operationalrate8.data);
}
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFSUPPRATES, word);
if ( result ) {
WLAN_LOG_ERROR("Failed to set supprates=%d.\n", word);
goto failed;
}
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, word);
if ( result ) {
WLAN_LOG_ERROR("Failed to set txrates=%d.\n", word);
goto failed;
}
/* Set the macmode so the frame setup code knows what to do */
if ( msg->bsstype.data == P80211ENUM_bsstype_independent ) {
wlandev->macmode = WLAN_MACMODE_IBSS_STA;
/* lets extend the data length a bit */
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFMAXDATALEN, 2304);
}
/* Enable the Port */
result = hfa384x_drvr_enable(hw, 0);
if ( result ) {
WLAN_LOG_ERROR("Enable macport failed, result=%d.\n", result);
goto failed;
}
msg->resultcode.data = P80211ENUM_resultcode_success;
/*** ADHOC IBSS ***/
/* see if current f/w is less than 8c3 */
if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
hw->ident_sta_fw.minor,
hw->ident_sta_fw.variant) <
HFA384x_FIRMWARE_VERSION(0,8,3)) {
/* Ad-Hoc not quite supported on Prism2 */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
goto done;
}
/*** ACCESS POINT ***/
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
/* Validate the command, if BSStype=infra is the tertiary loaded? */
if ( msg->bsstype.data == P80211ENUM_bsstype_independent ) {
WLAN_LOG_ERROR("AP driver cannot create IBSS.\n");
goto failed;
} else if ( hw->cap_sup_sta.id != 5) {
WLAN_LOG_ERROR("AP driver failed to detect AP firmware.\n");
goto failed;
}
/*** STATION ***/
/* Set the REQUIRED config items */
/* SSID */
pstr = (p80211pstrd_t*)&(msg->ssid.data);
prism2mgmt_pstr2bytestr(p2bytestr, pstr);
result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFOWNSSID,
bytebuf, HFA384x_RID_CNFOWNSSID_LEN);
bytebuf, HFA384x_RID_CNFOWNSSID_LEN);
if ( result ) {
WLAN_LOG_ERROR("Failed to set SSID, result=0x%04x\n", result);
WLAN_LOG_ERROR("Failed to set CnfOwnSSID\n");
goto failed;
}
result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFDESIREDSSID,
bytebuf, HFA384x_RID_CNFDESIREDSSID_LEN);
if ( result ) {
WLAN_LOG_ERROR("Failed to set CnfDesiredSSID\n");
goto failed;
}
/* bsstype - we use the default in the ap firmware */
/* IBSS port */
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, 0);
/* beacon period */
word = msg->beaconperiod.data;
......@@ -1431,98 +949,20 @@ int prism2mgmt_start(wlandevice_t *wlandev, void *msgp)
WLAN_LOG_ERROR("Failed to set supprates=%d.\n", word);
goto failed;
}
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL0, word);
if ( result ) {
WLAN_LOG_ERROR("Failed to set txrates=%d.\n", word);
goto failed;
}
/* ibssatimwindow */
if (msg->ibssatimwindow.status == P80211ENUM_msgitem_status_data_ok) {
WLAN_LOG_INFO("prism2mgmt_start: atimwindow not used in "
"Infrastructure mode, ignored.\n");
}
/* DTIM period */
word = msg->dtimperiod.data;
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFOWNDTIMPER, word);
if ( result ) {
WLAN_LOG_ERROR("Failed to set dtim period=%d.\n", word);
goto failed;
}
/* probedelay */
if (msg->probedelay.status == P80211ENUM_msgitem_status_data_ok) {
WLAN_LOG_INFO("prism2mgmt_start: probedelay not "
"supported in prism2, ignored.\n");
}
/* cfpollable, cfpollreq, cfpperiod, cfpmaxduration */
if (msg->cfpollable.data == P80211ENUM_truth_true &&
msg->cfpollreq.data == P80211ENUM_truth_true ) {
WLAN_LOG_ERROR("cfpollable=cfpollreq=true is illegal.\n");
result = -1;
goto failed;
}
/* read the PCFInfo and update */
result = hfa384x_drvr_getconfig(hw, HFA384x_RID_CNFAPPCFINFO,
pcfinfo, HFA384x_RID_CNFAPPCFINFO_LEN);
if ( result ) {
WLAN_LOG_INFO("prism2mgmt_start: read(pcfinfo) failed, "
"assume it's "
"not supported, pcf settings ignored.\n");
goto pcf_skip;
}
if ((msg->cfpollable.data == P80211ENUM_truth_false &&
msg->cfpollreq.data == P80211ENUM_truth_false) ) {
pcfinfo->MediumOccupancyLimit = 0;
pcfinfo->CFPPeriod = 0;
pcfinfo->CFPMaxDuration = 0;
pcfinfo->CFPFlags &= host2hfa384x_16((UINT16)~BIT0);
if ( msg->cfpperiod.status == P80211ENUM_msgitem_status_data_ok ||
msg->cfpmaxduration.status == P80211ENUM_msgitem_status_data_ok ) {
WLAN_LOG_WARNING(
"Setting cfpperiod or cfpmaxduration when "
"cfpollable and cfreq are false is pointless.\n");
}
}
if ((msg->cfpollable.data == P80211ENUM_truth_true ||
msg->cfpollreq.data == P80211ENUM_truth_true) ) {
if ( msg->cfpollable.data == P80211ENUM_truth_true) {
pcfinfo->CFPFlags |= host2hfa384x_16((UINT16)BIT0);
}
if ( msg->cfpperiod.status == P80211ENUM_msgitem_status_data_ok) {
pcfinfo->CFPPeriod = msg->cfpperiod.data;
pcfinfo->CFPPeriod = host2hfa384x_16(pcfinfo->CFPPeriod);
}
if ( msg->cfpmaxduration.status == P80211ENUM_msgitem_status_data_ok) {
pcfinfo->CFPMaxDuration = msg->cfpmaxduration.data;
pcfinfo->CFPMaxDuration = host2hfa384x_16(pcfinfo->CFPMaxDuration);
pcfinfo->MediumOccupancyLimit = pcfinfo->CFPMaxDuration;
}
}
result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFAPPCFINFO,
pcfinfo, HFA384x_RID_CNFAPPCFINFO_LEN);
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, word);
if ( result ) {
WLAN_LOG_ERROR("write(pcfinfo) failed.\n");
WLAN_LOG_ERROR("Failed to set txrates=%d.\n", word);
goto failed;
}
pcf_skip:
/* Set the macmode so the frame setup code knows what to do */
if ( msg->bsstype.data == P80211ENUM_bsstype_infrastructure ) {
wlandev->macmode = WLAN_MACMODE_ESS_AP;
if ( msg->bsstype.data == P80211ENUM_bsstype_independent ) {
wlandev->macmode = WLAN_MACMODE_IBSS_STA;
/* lets extend the data length a bit */
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFMAXDATALEN, 2304);
}
/* Set the BSSID to the same as our MAC */
memcpy( wlandev->bssid, wlandev->netdev->dev_addr, WLAN_BSSID_LEN);
/* Enable the Port */
result = hfa384x_drvr_enable(hw, 0);
if ( result ) {
......@@ -1544,80 +984,6 @@ done:
return result;
}
/*----------------------------------------------------------------
* prism2mgmt_enable
*
* Start a BSS. Any station can do this for IBSS, only AP for ESS.
*
* Arguments:
* wlandev wlan device structure
* msgp ptr to msg buffer
*
* Returns:
* 0 success and done
* <0 success, but we're waiting for something to finish.
* >0 an error occurred while handling the message.
* Side effects:
*
* Call context:
* process thread (usually)
* interrupt
----------------------------------------------------------------*/
int prism2mgmt_enable(wlandevice_t *wlandev, void *msgp)
{
int result = 0;
hfa384x_t *hw = wlandev->priv;
p80211msg_p2req_enable_t *msg = msgp;
DBFENTER;
if (!hw->ap) {
/*** STATION ***/
/* Ad-Hoc not quite supported on Prism2 */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
goto done;
}
/*** ACCESS POINT ***/
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
/* Is the tertiary loaded? */
if ( hw->cap_sup_sta.id != 5) {
WLAN_LOG_ERROR("AP driver failed to detect AP firmware.\n");
goto failed;
}
/* Set the macmode so the frame setup code knows what to do */
wlandev->macmode = WLAN_MACMODE_ESS_AP;
/* Set the BSSID to the same as our MAC */
memcpy( wlandev->bssid, wlandev->netdev->dev_addr, WLAN_BSSID_LEN);
/* Enable the Port */
result = hfa384x_drvr_enable(hw, 0);
if ( result ) {
WLAN_LOG_ERROR("Enable macport failed, result=%d.\n", result);
goto failed;
}
msg->resultcode.data = P80211ENUM_resultcode_success;
goto done;
failed:
msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
done:
result = 0;
DBFEXIT;
return result;
}
/*----------------------------------------------------------------
* prism2mgmt_readpda
*
......@@ -2341,16 +1707,6 @@ int prism2mgmt_autojoin(wlandevice_t *wlandev, void *msgp)
/* Set the SSID */
memcpy(&wlandev->ssid, &msg->ssid.data, sizeof(msg->ssid.data));
if (hw->ap) {
/*** ACCESS POINT ***/
/* Never supported on AP */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
goto done;
}
/* Disable the Port */
hfa384x_drvr_disable(hw, 0);
......@@ -2402,7 +1758,6 @@ int prism2mgmt_autojoin(wlandevice_t *wlandev, void *msgp)
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_success;
done:
DBFEXIT;
return result;
}
......
drivers/staging/wlan-ng/prism2mgmt.h
View file @ 5db8dcc9
......@@ -100,16 +100,10 @@ prism2sta_ev_alloc(wlandevice_t *wlandev);
int prism2mgmt_mibset_mibget(wlandevice_t *wlandev, void *msgp);
int prism2mgmt_powermgmt(wlandevice_t *wlandev, void *msgp);
int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp);
int prism2mgmt_scan_results(wlandevice_t *wlandev, void *msgp);
int prism2mgmt_join(wlandevice_t *wlandev, void *msgp);
int prism2mgmt_p2_join(wlandevice_t *wlandev, void *msgp);
int prism2mgmt_authenticate(wlandevice_t *wlandev, void *msgp);
int prism2mgmt_deauthenticate(wlandevice_t *wlandev, void *msgp);
int prism2mgmt_associate(wlandevice_t *wlandev, void *msgp);
int prism2mgmt_reassociate(wlandevice_t *wlandev, void *msgp);
int prism2mgmt_disassociate(wlandevice_t *wlandev, void *msgp);
int prism2mgmt_reset(wlandevice_t *wlandev, void *msgp);
int prism2mgmt_start(wlandevice_t *wlandev, void *msgp);
int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp);
......@@ -128,7 +122,6 @@ int prism2mgmt_flashdl_state(wlandevice_t *wlandev, void *msgp);
int prism2mgmt_flashdl_write(wlandevice_t *wlandev, void *msgp);
int prism2mgmt_mm_state(wlandevice_t *wlandev, void *msgp);
int prism2mgmt_dump_state(wlandevice_t *wlandev, void *msgp);
int prism2mgmt_enable(wlandevice_t *wlandev, void *msgp);
int prism2mgmt_autojoin(wlandevice_t *wlandev, void *msgp);
/*---------------------------------------------------------------
......
drivers/staging/wlan-ng/prism2sta.c
View file @ 5db8dcc9
......@@ -390,10 +390,6 @@ static int prism2sta_mlmerequest(wlandevice_t *wlandev, p80211msg_t *msg)
WLAN_LOG_DEBUG(2,"Received mibset request\n");
result = prism2mgmt_mibset_mibget(wlandev, msg);
break;
case DIDmsg_dot11req_powermgmt :
WLAN_LOG_DEBUG(2,"Received powermgmt request\n");
result = prism2mgmt_powermgmt(wlandev, msg);
break;
case DIDmsg_dot11req_scan :
WLAN_LOG_DEBUG(2,"Received scan request\n");
result = prism2mgmt_scan(wlandev, msg);
......@@ -402,30 +398,10 @@ static int prism2sta_mlmerequest(wlandevice_t *wlandev, p80211msg_t *msg)
WLAN_LOG_DEBUG(2,"Received scan_results request\n");
result = prism2mgmt_scan_results(wlandev, msg);
break;
case DIDmsg_dot11req_join :
WLAN_LOG_DEBUG(2,"Received join request\n");
result = prism2mgmt_join(wlandev, msg);
break;
case DIDmsg_dot11req_authenticate :
WLAN_LOG_DEBUG(2,"Received authenticate request\n");
result = prism2mgmt_authenticate(wlandev, msg);
break;
case DIDmsg_dot11req_deauthenticate :
WLAN_LOG_DEBUG(2,"Received mlme deauthenticate request\n");
result = prism2mgmt_deauthenticate(wlandev, msg);
break;
case DIDmsg_dot11req_associate :
WLAN_LOG_DEBUG(2,"Received mlme associate request\n");
result = prism2mgmt_associate(wlandev, msg);
break;
case DIDmsg_dot11req_reassociate :
WLAN_LOG_DEBUG(2,"Received mlme reassociate request\n");
result = prism2mgmt_reassociate(wlandev, msg);
break;
case DIDmsg_dot11req_disassociate :
WLAN_LOG_DEBUG(2,"Received mlme disassociate request\n");
result = prism2mgmt_disassociate(wlandev, msg);
break;
case DIDmsg_dot11req_reset :
WLAN_LOG_DEBUG(2,"Received mlme reset request\n");
result = prism2mgmt_reset(wlandev, msg);
......@@ -522,18 +498,11 @@ static int prism2sta_mlmerequest(wlandevice_t *wlandev, p80211msg_t *msg)
WLAN_LOG_DEBUG(2,"Received mlme autojoin request\n");
result = prism2mgmt_autojoin(wlandev, msg);
break;
case DIDmsg_p2req_enable :
WLAN_LOG_DEBUG(2,"Received mlme enable request\n");
result = prism2mgmt_enable(wlandev, msg);
break;
case DIDmsg_lnxreq_commsquality: {
p80211msg_lnxreq_commsquality_t *qualmsg;
WLAN_LOG_DEBUG(2,"Received commsquality request\n");
if (hw->ap)
break;
qualmsg = (p80211msg_lnxreq_commsquality_t*) msg;
qualmsg->link.status = P80211ENUM_msgitem_status_data_ok;
......@@ -825,17 +794,17 @@ static int prism2sta_getcardinfo(wlandevice_t *wlandev)
hw->ident_sta_fw.variant &= ~((UINT16)(BIT14 | BIT15));
if ( hw->ident_sta_fw.id == 0x1f ) {
hw->ap = 0;
WLAN_LOG_INFO(
"ident: sta f/w: id=0x%02x %d.%d.%d\n",
hw->ident_sta_fw.id, hw->ident_sta_fw.major,
hw->ident_sta_fw.minor, hw->ident_sta_fw.variant);
} else {
hw->ap = 1;
WLAN_LOG_INFO(
"ident: ap f/w: id=0x%02x %d.%d.%d\n",
hw->ident_sta_fw.id, hw->ident_sta_fw.major,
hw->ident_sta_fw.minor, hw->ident_sta_fw.variant);
WLAN_LOG_ERROR("Unsupported Tertiary AP firmeare loaded!\n");
goto failed;
}
/* Compatibility range, Modem supplier */
......@@ -1091,10 +1060,6 @@ static int prism2sta_setmulticast(wlandevice_t *wlandev, netdevice_t *dev)
if ( hw->state != HFA384x_STATE_RUNNING )
goto exit;
/* If we're an AP, do nothing here */
if (hw->ap)
goto exit;
if ( (dev->flags & (IFF_PROMISC | IFF_ALLMULTI)) != 0 )
promisc = P80211ENUM_truth_true;
else
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment