Skip to content

L
linux-davinci
Commit 5761bc5d authored by Li Yang's avatar Li Yang Committed by Kumar Gala
Browse files
Options

[POWERPC] 83xx: add device trees for MPC837x MDS board 

Signed-off-by: default avatarLi Yang <leoli@freescale.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent 93967ae2
Show whitespace changes
Inline Side-by-side
Showing with 837 additions and 0 deletions
arch/powerpc/boot/dts/mpc8377_mds.dts 0 → 100644
View file @ 5761bc5d
/*
* MPC8377E MDS Device Tree Source
*
* Copyright 2007 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "fsl,mpc8377emds";
compatible = "fsl,mpc8377emds","fsl,mpc837xmds";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8377@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <0x20>;
i-cache-line-size = <0x20>;
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>; // 512MB at 0
};
soc@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
wdt@200 {
compatible = "mpc83xx_wdt";
reg = <0x200 0x100>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <0xe 0x8>;
interrupt-parent = < &ipic >;
dfsrr;
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <0xf 0x8>;
interrupt-parent = < &ipic >;
dfsrr;
};
spi@7000 {
compatible = "fsl_spi";
reg = <0x7000 0x1000>;
interrupts = <0x10 0x8>;
interrupt-parent = < &ipic >;
mode = "cpu";
};
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = < &ipic >;
interrupts = <0x26 0x8>;
phy_type = "utmi_wide";
};
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = < &ipic >;
interrupts = <0x11 0x8>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = < &ipic >;
interrupts = <0x12 0x8>;
reg = <3>;
device_type = "ethernet-phy";
};
};
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>;
phy-connection-type = "mii";
interrupt-parent = < &ipic >;
phy-handle = < &phy2 >;
};
enet1: ethernet@25000 {
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>;
phy-connection-type = "mii";
interrupt-parent = < &ipic >;
phy-handle = < &phy3 >;
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <0x9 0x8>;
interrupt-parent = < &ipic >;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <0xa 0x8>;
interrupt-parent = < &ipic >;
};
crypto@30000 {
model = "SEC3";
compatible = "talitos";
reg = <0x30000 0x10000>;
interrupts = <0xb 0x8>;
interrupt-parent = < &ipic >;
/* Rev. 3.0 geometry */
num-channels = <4>;
channel-fifo-len = <0x18>;
exec-units-mask = <0x000001fe>;
descriptor-types-mask = <0x03ab0ebf>;
};
sdhc@2e000 {
model = "eSDHC";
compatible = "fsl,esdhc";
reg = <0x2e000 0x1000>;
interrupts = <0x2a 0x8>;
interrupt-parent = < &ipic >;
};
sata@18000 {
compatible = "fsl,mpc8379-sata";
reg = <0x18000 0x1000>;
interrupts = <0x2c 0x8>;
interrupt-parent = < &ipic >;
};
sata@19000 {
compatible = "fsl,mpc8379-sata";
reg = <0x19000 0x1000>;
interrupts = <0x2d 0x8>;
interrupt-parent = < &ipic >;
};
/* IPIC
* interrupts cell = <intr #, sense>
* sense values match linux IORESOURCE_IRQ_* defines:
* sense == 8: Level, low assertion
* sense == 2: Edge, high-to-low change
*/
ipic: pic@700 {
compatible = "fsl,ipic";
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x700 0x100>;
};
};
pci0: pci@e0008500 {
cell-index = <0>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 */
0x8800 0x0 0x0 0x1 &ipic 0x14 0x8
0x8800 0x0 0x0 0x2 &ipic 0x15 0x8
0x8800 0x0 0x0 0x3 &ipic 0x16 0x8
0x8800 0x0 0x0 0x4 &ipic 0x17 0x8
/* IDSEL 0x12 */
0x9000 0x0 0x0 0x1 &ipic 0x16 0x8
0x9000 0x0 0x0 0x2 &ipic 0x17 0x8
0x9000 0x0 0x0 0x3 &ipic 0x14 0x8
0x9000 0x0 0x0 0x4 &ipic 0x15 0x8
/* IDSEL 0x13 */
0x9800 0x0 0x0 0x1 &ipic 0x17 0x8
0x9800 0x0 0x0 0x2 &ipic 0x14 0x8
0x9800 0x0 0x0 0x3 &ipic 0x15 0x8
0x9800 0x0 0x0 0x4 &ipic 0x16 0x8
/* IDSEL 0x15 */
0xa800 0x0 0x0 0x1 &ipic 0x14 0x8
0xa800 0x0 0x0 0x2 &ipic 0x15 0x8
0xa800 0x0 0x0 0x3 &ipic 0x16 0x8
0xa800 0x0 0x0 0x4 &ipic 0x17 0x8
/* IDSEL 0x16 */
0xb000 0x0 0x0 0x1 &ipic 0x17 0x8
0xb000 0x0 0x0 0x2 &ipic 0x14 0x8
0xb000 0x0 0x0 0x3 &ipic 0x15 0x8
0xb000 0x0 0x0 0x4 &ipic 0x16 0x8
/* IDSEL 0x17 */
0xb800 0x0 0x0 0x1 &ipic 0x16 0x8
0xb800 0x0 0x0 0x2 &ipic 0x17 0x8
0xb800 0x0 0x0 0x3 &ipic 0x14 0x8
0xb800 0x0 0x0 0x4 &ipic 0x15 0x8
/* IDSEL 0x18 */
0xc000 0x0 0x0 0x1 &ipic 0x15 0x8
0xc000 0x0 0x0 0x2 &ipic 0x16 0x8
0xc000 0x0 0x0 0x3 &ipic 0x17 0x8
0xc000 0x0 0x0 0x4 &ipic 0x14 0x8>;
interrupt-parent = < &ipic >;
interrupts = <0x42 0x8>;
bus-range = <0 0>;
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
clock-frequency = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xe0008500 0x100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
};
arch/powerpc/boot/dts/mpc8378_mds.dts 0 → 100644
View file @ 5761bc5d
/*
* MPC8378E MDS Device Tree Source
*
* Copyright 2007 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "fsl,mpc8378emds";
compatible = "fsl,mpc8378emds","fsl,mpc837xmds";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8378@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <0x20>;
i-cache-line-size = <0x20>;
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>; // 512MB at 0
};
soc@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
wdt@200 {
compatible = "mpc83xx_wdt";
reg = <0x200 0x100>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <0xe 0x8>;
interrupt-parent = < &ipic >;
dfsrr;
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <0xf 0x8>;
interrupt-parent = < &ipic >;
dfsrr;
};
spi@7000 {
compatible = "fsl_spi";
reg = <0x7000 0x1000>;
interrupts = <0x10 0x8>;
interrupt-parent = < &ipic >;
mode = "cpu";
};
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = < &ipic >;
interrupts = <0x26 0x8>;
phy_type = "utmi_wide";
};
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = < &ipic >;
interrupts = <0x11 0x8>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = < &ipic >;
interrupts = <0x12 0x8>;
reg = <3>;
device_type = "ethernet-phy";
};
};
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>;
phy-connection-type = "mii";
interrupt-parent = < &ipic >;
phy-handle = < &phy2 >;
};
enet1: ethernet@25000 {
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>;
phy-connection-type = "mii";
interrupt-parent = < &ipic >;
phy-handle = < &phy3 >;
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <0x9 0x8>;
interrupt-parent = < &ipic >;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <0xa 0x8>;
interrupt-parent = < &ipic >;
};
crypto@30000 {
model = "SEC3";
compatible = "talitos";
reg = <0x30000 0x10000>;
interrupts = <0xb 0x8>;
interrupt-parent = < &ipic >;
/* Rev. 3.0 geometry */
num-channels = <4>;
channel-fifo-len = <0x18>;
exec-units-mask = <0x000001fe>;
descriptor-types-mask = <0x03ab0ebf>;
};
sdhc@2e000 {
model = "eSDHC";
compatible = "fsl,esdhc";
reg = <0x2e000 0x1000>;
interrupts = <0x2a 0x8>;
interrupt-parent = < &ipic >;
};
/* IPIC
* interrupts cell = <intr #, sense>
* sense values match linux IORESOURCE_IRQ_* defines:
* sense == 8: Level, low assertion
* sense == 2: Edge, high-to-low change
*/
ipic: pic@700 {
compatible = "fsl,ipic";
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x700 0x100>;
};
};
pci0: pci@e0008500 {
cell-index = <0>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 */
0x8800 0x0 0x0 0x1 &ipic 0x14 0x8
0x8800 0x0 0x0 0x2 &ipic 0x15 0x8
0x8800 0x0 0x0 0x3 &ipic 0x16 0x8
0x8800 0x0 0x0 0x4 &ipic 0x17 0x8
/* IDSEL 0x12 */
0x9000 0x0 0x0 0x1 &ipic 0x16 0x8
0x9000 0x0 0x0 0x2 &ipic 0x17 0x8
0x9000 0x0 0x0 0x3 &ipic 0x14 0x8
0x9000 0x0 0x0 0x4 &ipic 0x15 0x8
/* IDSEL 0x13 */
0x9800 0x0 0x0 0x1 &ipic 0x17 0x8
0x9800 0x0 0x0 0x2 &ipic 0x14 0x8
0x9800 0x0 0x0 0x3 &ipic 0x15 0x8
0x9800 0x0 0x0 0x4 &ipic 0x16 0x8
/* IDSEL 0x15 */
0xa800 0x0 0x0 0x1 &ipic 0x14 0x8
0xa800 0x0 0x0 0x2 &ipic 0x15 0x8
0xa800 0x0 0x0 0x3 &ipic 0x16 0x8
0xa800 0x0 0x0 0x4 &ipic 0x17 0x8
/* IDSEL 0x16 */
0xb000 0x0 0x0 0x1 &ipic 0x17 0x8
0xb000 0x0 0x0 0x2 &ipic 0x14 0x8
0xb000 0x0 0x0 0x3 &ipic 0x15 0x8
0xb000 0x0 0x0 0x4 &ipic 0x16 0x8
/* IDSEL 0x17 */
0xb800 0x0 0x0 0x1 &ipic 0x16 0x8
0xb800 0x0 0x0 0x2 &ipic 0x17 0x8
0xb800 0x0 0x0 0x3 &ipic 0x14 0x8
0xb800 0x0 0x0 0x4 &ipic 0x15 0x8
/* IDSEL 0x18 */
0xc000 0x0 0x0 0x1 &ipic 0x15 0x8
0xc000 0x0 0x0 0x2 &ipic 0x16 0x8
0xc000 0x0 0x0 0x3 &ipic 0x17 0x8
0xc000 0x0 0x0 0x4 &ipic 0x14 0x8>;
interrupt-parent = < &ipic >;
interrupts = <0x42 0x8>;
bus-range = <0 0>;
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
clock-frequency = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xe0008500 0x100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
};
arch/powerpc/boot/dts/mpc8379_mds.dts 0 → 100644
View file @ 5761bc5d
/*
* MPC8379E MDS Device Tree Source
*
* Copyright 2007 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "fsl,mpc8379emds";
compatible = "fsl,mpc8379emds","fsl,mpc837xmds";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8379@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <0x20>;
i-cache-line-size = <0x20>;
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>; // 512MB at 0
};
soc@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
wdt@200 {
compatible = "mpc83xx_wdt";
reg = <0x200 0x100>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <0xe 0x8>;
interrupt-parent = < &ipic >;
dfsrr;
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <0xf 0x8>;
interrupt-parent = < &ipic >;
dfsrr;
};
spi@7000 {
compatible = "fsl_spi";
reg = <0x7000 0x1000>;
interrupts = <0x10 0x8>;
interrupt-parent = < &ipic >;
mode = "cpu";
};
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = < &ipic >;
interrupts = <0x26 0x8>;
phy_type = "utmi_wide";
};
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = < &ipic >;
interrupts = <0x11 0x8>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = < &ipic >;
interrupts = <0x12 0x8>;
reg = <3>;
device_type = "ethernet-phy";
};
};
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>;
phy-connection-type = "mii";
interrupt-parent = < &ipic >;
phy-handle = < &phy2 >;
};
enet1: ethernet@25000 {
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>;
phy-connection-type = "mii";
interrupt-parent = < &ipic >;
phy-handle = < &phy3 >;
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <0x9 0x8>;
interrupt-parent = < &ipic >;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <0xa 0x8>;
interrupt-parent = < &ipic >;
};
crypto@30000 {
model = "SEC3";
compatible = "talitos";
reg = <0x30000 0x10000>;
interrupts = <0xb 0x8>;
interrupt-parent = < &ipic >;
/* Rev. 3.0 geometry */
num-channels = <4>;
channel-fifo-len = <0x18>;
exec-units-mask = <0x000001fe>;
descriptor-types-mask = <0x03ab0ebf>;
};
sdhc@2e000 {
model = "eSDHC";
compatible = "fsl,esdhc";
reg = <0x2e000 0x1000>;
interrupts = <0x2a 0x8>;
interrupt-parent = < &ipic >;
};
sata@18000 {
compatible = "fsl,mpc8379-sata";
reg = <0x18000 0x1000>;
interrupts = <0x2c 0x8>;
interrupt-parent = < &ipic >;
};
sata@19000 {
compatible = "fsl,mpc8379-sata";
reg = <0x19000 0x1000>;
interrupts = <0x2d 0x8>;
interrupt-parent = < &ipic >;
};
sata@1a000 {
compatible = "fsl,mpc8379-sata";
reg = <0x1a000 0x1000>;
interrupts = <0x2e 0x8>;
interrupt-parent = < &ipic >;
};
sata@1b000 {
compatible = "fsl,mpc8379-sata";
reg = <0x1b000 0x1000>;
interrupts = <0x2f 0x8>;
interrupt-parent = < &ipic >;
};
/* IPIC
* interrupts cell = <intr #, sense>
* sense values match linux IORESOURCE_IRQ_* defines:
* sense == 8: Level, low assertion
* sense == 2: Edge, high-to-low change
*/
ipic: pic@700 {
compatible = "fsl,ipic";
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x700 0x100>;
};
};
pci0: pci@e0008500 {
cell-index = <0>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 */
0x8800 0x0 0x0 0x1 &ipic 0x14 0x8
0x8800 0x0 0x0 0x2 &ipic 0x15 0x8
0x8800 0x0 0x0 0x3 &ipic 0x16 0x8
0x8800 0x0 0x0 0x4 &ipic 0x17 0x8
/* IDSEL 0x12 */
0x9000 0x0 0x0 0x1 &ipic 0x16 0x8
0x9000 0x0 0x0 0x2 &ipic 0x17 0x8
0x9000 0x0 0x0 0x3 &ipic 0x14 0x8
0x9000 0x0 0x0 0x4 &ipic 0x15 0x8
/* IDSEL 0x13 */
0x9800 0x0 0x0 0x1 &ipic 0x17 0x8
0x9800 0x0 0x0 0x2 &ipic 0x14 0x8
0x9800 0x0 0x0 0x3 &ipic 0x15 0x8
0x9800 0x0 0x0 0x4 &ipic 0x16 0x8
/* IDSEL 0x15 */
0xa800 0x0 0x0 0x1 &ipic 0x14 0x8
0xa800 0x0 0x0 0x2 &ipic 0x15 0x8
0xa800 0x0 0x0 0x3 &ipic 0x16 0x8
0xa800 0x0 0x0 0x4 &ipic 0x17 0x8
/* IDSEL 0x16 */
0xb000 0x0 0x0 0x1 &ipic 0x17 0x8
0xb000 0x0 0x0 0x2 &ipic 0x14 0x8
0xb000 0x0 0x0 0x3 &ipic 0x15 0x8
0xb000 0x0 0x0 0x4 &ipic 0x16 0x8
/* IDSEL 0x17 */
0xb800 0x0 0x0 0x1 &ipic 0x16 0x8
0xb800 0x0 0x0 0x2 &ipic 0x17 0x8
0xb800 0x0 0x0 0x3 &ipic 0x14 0x8
0xb800 0x0 0x0 0x4 &ipic 0x15 0x8
/* IDSEL 0x18 */
0xc000 0x0 0x0 0x1 &ipic 0x15 0x8
0xc000 0x0 0x0 0x2 &ipic 0x16 0x8
0xc000 0x0 0x0 0x3 &ipic 0x17 0x8
0xc000 0x0 0x0 0x4 &ipic 0x14 0x8>;
interrupt-parent = < &ipic >;
interrupts = <0x42 0x8>;
bus-range = <0 0>;
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
clock-frequency = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xe0008500 0x100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment