Commit 55c888d6 authored by Oleg Nesterov's avatar Oleg Nesterov Committed by Linus Torvalds

[PATCH] timers fixes/improvements

This patch tries to solve following problems:

1. del_timer_sync() is racy. The timer can be fired again after
   del_timer_sync have checked all cpus and before it will recheck
   timer_pending().

2. It has scalability problems. All cpus are scanned to determine
   if the timer is running on that cpu.

   With this patch del_timer_sync is O(1) and no slower than plain
   del_timer(pending_timer), unless it has to actually wait for
   completion of the currently running timer.

   The only restriction is that the recurring timer should not use
   add_timer_on().

3. The timers are not serialized wrt to itself.

   If CPU_0 does mod_timer(jiffies+1) while the timer is currently
   running on CPU 1, it is quite possible that local interrupt on
   CPU_0 will start that timer before it finished on CPU_1.

4. The timers locking is suboptimal. __mod_timer() takes 3 locks
   at once and still requires wmb() in del_timer/run_timers.

   The new implementation takes 2 locks sequentially and does not
   need memory barriers.

Currently ->base != NULL means that the timer is pending. In that case
->base.lock is used to lock the timer. __mod_timer also takes timer->lock
because ->base can be == NULL.

This patch uses timer->entry.next != NULL as indication that the timer is
pending. So it does __list_del(), entry->next = NULL instead of list_del()
when the timer is deleted.

The ->base field is used for hashed locking only, it is initialized
in init_timer() which sets ->base = per_cpu(tvec_bases). When the
tvec_bases.lock is locked, it means that all timers which are tied
to this base via timer->base are locked, and the base itself is locked
too.

So __run_timers/migrate_timers can safely modify all timers which could
be found on ->tvX lists (pending timers).

When the timer's base is locked, and the timer removed from ->entry list
(which means that _run_timers/migrate_timers can't see this timer), it is
possible to set timer->base = NULL and drop the lock: the timer remains
locked.

This patch adds lock_timer_base() helper, which waits for ->base != NULL,
locks the ->base, and checks it is still the same.

__mod_timer() schedules the timer on the local CPU and changes it's base.
However, it does not lock both old and new bases at once. It locks the
timer via lock_timer_base(), deletes the timer, sets ->base = NULL, and
unlocks old base. Then __mod_timer() locks new_base, sets ->base = new_base,
and adds this timer. This simplifies the code, because AB-BA deadlock is not
possible. __mod_timer() also ensures that the timer's base is not changed
while the timer's handler is running on the old base.

__run_timers(), del_timer() do not change ->base anymore, they only clear
pending flag.

So del_timer_sync() can test timer->base->running_timer == timer to detect
whether it is running or not.

We don't need timer_list->lock anymore, this patch kills it.

We also don't need barriers. del_timer() and __run_timers() used smp_wmb()
before clearing timer's pending flag. It was needed because __mod_timer()
did not lock old_base if the timer is not pending, so __mod_timer()->list_add()
could race with del_timer()->list_del(). With this patch these functions are
serialized through base->lock.

One problem. TIMER_INITIALIZER can't use per_cpu(tvec_bases). So this patch
adds global

        struct timer_base_s {
                spinlock_t lock;
                struct timer_list *running_timer;
        } __init_timer_base;

which is used by TIMER_INITIALIZER. The corresponding fields in tvec_t_base_s
struct are replaced by struct timer_base_s t_base.

It is indeed ugly. But this can't have scalability problems. The global
__init_timer_base.lock is used only when __mod_timer() is called for the first
time AND the timer was compile time initialized. After that the timer migrates
to the local CPU.
Signed-off-by: default avatarOleg Nesterov <oleg@tv-sign.ru>
Acked-by: default avatarIngo Molnar <mingo@elte.hu>
Signed-off-by: default avatarRenaud Lienhart <renaud.lienhart@free.fr>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent bdd646a4
......@@ -6,45 +6,33 @@
#include <linux/spinlock.h>
#include <linux/stddef.h>
struct tvec_t_base_s;
struct timer_base_s;
struct timer_list {
struct list_head entry;
unsigned long expires;
spinlock_t lock;
unsigned long magic;
void (*function)(unsigned long);
unsigned long data;
struct tvec_t_base_s *base;
struct timer_base_s *base;
};
#define TIMER_MAGIC 0x4b87ad6e
extern struct timer_base_s __init_timer_base;
#define TIMER_INITIALIZER(_function, _expires, _data) { \
.function = (_function), \
.expires = (_expires), \
.data = (_data), \
.base = NULL, \
.base = &__init_timer_base, \
.magic = TIMER_MAGIC, \
.lock = SPIN_LOCK_UNLOCKED, \
}
/***
* init_timer - initialize a timer.
* @timer: the timer to be initialized
*
* init_timer() must be done to a timer prior calling *any* of the
* other timer functions.
*/
static inline void init_timer(struct timer_list * timer)
{
timer->base = NULL;
timer->magic = TIMER_MAGIC;
spin_lock_init(&timer->lock);
}
void fastcall init_timer(struct timer_list * timer);
/***
* timer_pending - is a timer pending?
......@@ -58,7 +46,7 @@ static inline void init_timer(struct timer_list * timer)
*/
static inline int timer_pending(const struct timer_list * timer)
{
return timer->base != NULL;
return timer->entry.next != NULL;
}
extern void add_timer_on(struct timer_list *timer, int cpu);
......@@ -89,12 +77,12 @@ static inline void add_timer(struct timer_list * timer)
#ifdef CONFIG_SMP
extern int del_timer_sync(struct timer_list *timer);
extern int del_singleshot_timer_sync(struct timer_list *timer);
#else
# define del_timer_sync(t) del_timer(t)
# define del_singleshot_timer_sync(t) del_timer(t)
#endif
#define del_singleshot_timer_sync(t) del_timer_sync(t)
extern void init_timers(void);
extern void run_local_timers(void);
extern void it_real_fn(unsigned long);
......
......@@ -57,6 +57,11 @@ static void time_interpolator_update(long delta_nsec);
#define TVN_MASK (TVN_SIZE - 1)
#define TVR_MASK (TVR_SIZE - 1)
struct timer_base_s {
spinlock_t lock;
struct timer_list *running_timer;
};
typedef struct tvec_s {
struct list_head vec[TVN_SIZE];
} tvec_t;
......@@ -66,9 +71,8 @@ typedef struct tvec_root_s {
} tvec_root_t;
struct tvec_t_base_s {
spinlock_t lock;
struct timer_base_s t_base;
unsigned long timer_jiffies;
struct timer_list *running_timer;
tvec_root_t tv1;
tvec_t tv2;
tvec_t tv3;
......@@ -77,18 +81,16 @@ struct tvec_t_base_s {
} ____cacheline_aligned_in_smp;
typedef struct tvec_t_base_s tvec_base_t;
static DEFINE_PER_CPU(tvec_base_t, tvec_bases);
static inline void set_running_timer(tvec_base_t *base,
struct timer_list *timer)
{
#ifdef CONFIG_SMP
base->running_timer = timer;
base->t_base.running_timer = timer;
#endif
}
/* Fake initialization */
static DEFINE_PER_CPU(tvec_base_t, tvec_bases) = { SPIN_LOCK_UNLOCKED };
static void check_timer_failed(struct timer_list *timer)
{
static int whine_count;
......@@ -103,7 +105,6 @@ static void check_timer_failed(struct timer_list *timer)
/*
* Now fix it up
*/
spin_lock_init(&timer->lock);
timer->magic = TIMER_MAGIC;
}
......@@ -156,65 +157,113 @@ static void internal_add_timer(tvec_base_t *base, struct timer_list *timer)
list_add_tail(&timer->entry, vec);
}
typedef struct timer_base_s timer_base_t;
/*
* Used by TIMER_INITIALIZER, we can't use per_cpu(tvec_bases)
* at compile time, and we need timer->base to lock the timer.
*/
timer_base_t __init_timer_base
____cacheline_aligned_in_smp = { .lock = SPIN_LOCK_UNLOCKED };
EXPORT_SYMBOL(__init_timer_base);
/***
* init_timer - initialize a timer.
* @timer: the timer to be initialized
*
* init_timer() must be done to a timer prior calling *any* of the
* other timer functions.
*/
void fastcall init_timer(struct timer_list *timer)
{
timer->entry.next = NULL;
timer->base = &per_cpu(tvec_bases, raw_smp_processor_id()).t_base;
timer->magic = TIMER_MAGIC;
}
EXPORT_SYMBOL(init_timer);
static inline void detach_timer(struct timer_list *timer,
int clear_pending)
{
struct list_head *entry = &timer->entry;
__list_del(entry->prev, entry->next);
if (clear_pending)
entry->next = NULL;
entry->prev = LIST_POISON2;
}
/*
* We are using hashed locking: holding per_cpu(tvec_bases).t_base.lock
* means that all timers which are tied to this base via timer->base are
* locked, and the base itself is locked too.
*
* So __run_timers/migrate_timers can safely modify all timers which could
* be found on ->tvX lists.
*
* When the timer's base is locked, and the timer removed from list, it is
* possible to set timer->base = NULL and drop the lock: the timer remains
* locked.
*/
static timer_base_t *lock_timer_base(struct timer_list *timer,
unsigned long *flags)
{
timer_base_t *base;
for (;;) {
base = timer->base;
if (likely(base != NULL)) {
spin_lock_irqsave(&base->lock, *flags);
if (likely(base == timer->base))
return base;
/* The timer has migrated to another CPU */
spin_unlock_irqrestore(&base->lock, *flags);
}
cpu_relax();
}
}
int __mod_timer(struct timer_list *timer, unsigned long expires)
{
tvec_base_t *old_base, *new_base;
timer_base_t *base;
tvec_base_t *new_base;
unsigned long flags;
int ret = 0;
BUG_ON(!timer->function);
check_timer(timer);
spin_lock_irqsave(&timer->lock, flags);
base = lock_timer_base(timer, &flags);
if (timer_pending(timer)) {
detach_timer(timer, 0);
ret = 1;
}
new_base = &__get_cpu_var(tvec_bases);
repeat:
old_base = timer->base;
/*
* Prevent deadlocks via ordering by old_base < new_base.
*/
if (old_base && (new_base != old_base)) {
if (old_base < new_base) {
spin_lock(&new_base->lock);
spin_lock(&old_base->lock);
} else {
spin_lock(&old_base->lock);
spin_lock(&new_base->lock);
}
if (base != &new_base->t_base) {
/*
* The timer base might have been cancelled while we were
* trying to take the lock(s):
* We are trying to schedule the timer on the local CPU.
* However we can't change timer's base while it is running,
* otherwise del_timer_sync() can't detect that the timer's
* handler yet has not finished. This also guarantees that
* the timer is serialized wrt itself.
*/
if (timer->base != old_base) {
spin_unlock(&new_base->lock);
spin_unlock(&old_base->lock);
goto repeat;
}
} else {
spin_lock(&new_base->lock);
if (timer->base != old_base) {
spin_unlock(&new_base->lock);
goto repeat;
if (unlikely(base->running_timer == timer)) {
/* The timer remains on a former base */
new_base = container_of(base, tvec_base_t, t_base);
} else {
/* See the comment in lock_timer_base() */
timer->base = NULL;
spin_unlock(&base->lock);
spin_lock(&new_base->t_base.lock);
timer->base = &new_base->t_base;
}
}
/*
* Delete the previous timeout (if there was any), and install
* the new one:
*/
if (old_base) {
list_del(&timer->entry);
ret = 1;
}
timer->expires = expires;
internal_add_timer(new_base, timer);
timer->base = new_base;
if (old_base && (new_base != old_base))
spin_unlock(&old_base->lock);
spin_unlock(&new_base->lock);
spin_unlock_irqrestore(&timer->lock, flags);
spin_unlock_irqrestore(&new_base->t_base.lock, flags);
return ret;
}
......@@ -232,15 +281,15 @@ void add_timer_on(struct timer_list *timer, int cpu)
{
tvec_base_t *base = &per_cpu(tvec_bases, cpu);
unsigned long flags;
BUG_ON(timer_pending(timer) || !timer->function);
check_timer(timer);
spin_lock_irqsave(&base->lock, flags);
spin_lock_irqsave(&base->t_base.lock, flags);
timer->base = &base->t_base;
internal_add_timer(base, timer);
timer->base = base;
spin_unlock_irqrestore(&base->lock, flags);
spin_unlock_irqrestore(&base->t_base.lock, flags);
}
......@@ -295,27 +344,22 @@ EXPORT_SYMBOL(mod_timer);
*/
int del_timer(struct timer_list *timer)
{
timer_base_t *base;
unsigned long flags;
tvec_base_t *base;
int ret = 0;
check_timer(timer);
repeat:
base = timer->base;
if (!base)
return 0;
spin_lock_irqsave(&base->lock, flags);
if (base != timer->base) {
if (timer_pending(timer)) {
base = lock_timer_base(timer, &flags);
if (timer_pending(timer)) {
detach_timer(timer, 1);
ret = 1;
}
spin_unlock_irqrestore(&base->lock, flags);
goto repeat;
}
list_del(&timer->entry);
/* Need to make sure that anybody who sees a NULL base also sees the list ops */
smp_wmb();
timer->base = NULL;
spin_unlock_irqrestore(&base->lock, flags);
return 1;
return ret;
}
EXPORT_SYMBOL(del_timer);
......@@ -332,72 +376,39 @@ EXPORT_SYMBOL(del_timer);
* Synchronization rules: callers must prevent restarting of the timer,
* otherwise this function is meaningless. It must not be called from
* interrupt contexts. The caller must not hold locks which would prevent
* completion of the timer's handler. Upon exit the timer is not queued and
* the handler is not running on any CPU.
* completion of the timer's handler. The timer's handler must not call
* add_timer_on(). Upon exit the timer is not queued and the handler is
* not running on any CPU.
*
* The function returns whether it has deactivated a pending timer or not.
*
* del_timer_sync() is slow and complicated because it copes with timer
* handlers which re-arm the timer (periodic timers). If the timer handler
* is known to not do this (a single shot timer) then use
* del_singleshot_timer_sync() instead.
*/
int del_timer_sync(struct timer_list *timer)
{
tvec_base_t *base;
int i, ret = 0;
timer_base_t *base;
unsigned long flags;
int ret = -1;
check_timer(timer);
del_again:
ret += del_timer(timer);
do {
base = lock_timer_base(timer, &flags);
for_each_online_cpu(i) {
base = &per_cpu(tvec_bases, i);
if (base->running_timer == timer) {
while (base->running_timer == timer) {
cpu_relax();
preempt_check_resched();
}
break;
if (base->running_timer == timer)
goto unlock;
ret = 0;
if (timer_pending(timer)) {
detach_timer(timer, 1);
ret = 1;
}
}
smp_rmb();
if (timer_pending(timer))
goto del_again;
unlock:
spin_unlock_irqrestore(&base->lock, flags);
} while (ret < 0);
return ret;
}
EXPORT_SYMBOL(del_timer_sync);
/***
* del_singleshot_timer_sync - deactivate a non-recursive timer
* @timer: the timer to be deactivated
*
* This function is an optimization of del_timer_sync for the case where the
* caller can guarantee the timer does not reschedule itself in its timer
* function.
*
* Synchronization rules: callers must prevent restarting of the timer,
* otherwise this function is meaningless. It must not be called from
* interrupt contexts. The caller must not hold locks which wold prevent
* completion of the timer's handler. Upon exit the timer is not queued and
* the handler is not running on any CPU.
*
* The function returns whether it has deactivated a pending timer or not.
*/
int del_singleshot_timer_sync(struct timer_list *timer)
{
int ret = del_timer(timer);
if (!ret) {
ret = del_timer_sync(timer);
BUG_ON(ret);
}
return ret;
}
EXPORT_SYMBOL(del_singleshot_timer_sync);
EXPORT_SYMBOL(del_timer_sync);
#endif
static int cascade(tvec_base_t *base, tvec_t *tv, int index)
......@@ -415,7 +426,7 @@ static int cascade(tvec_base_t *base, tvec_t *tv, int index)
struct timer_list *tmp;
tmp = list_entry(curr, struct timer_list, entry);
BUG_ON(tmp->base != base);
BUG_ON(tmp->base != &base->t_base);
curr = curr->next;
internal_add_timer(base, tmp);
}
......@@ -437,7 +448,7 @@ static inline void __run_timers(tvec_base_t *base)
{
struct timer_list *timer;
spin_lock_irq(&base->lock);
spin_lock_irq(&base->t_base.lock);
while (time_after_eq(jiffies, base->timer_jiffies)) {
struct list_head work_list = LIST_HEAD_INIT(work_list);
struct list_head *head = &work_list;
......@@ -453,8 +464,7 @@ static inline void __run_timers(tvec_base_t *base)
cascade(base, &base->tv5, INDEX(3));
++base->timer_jiffies;
list_splice_init(base->tv1.vec + index, &work_list);
repeat:
if (!list_empty(head)) {
while (!list_empty(head)) {
void (*fn)(unsigned long);
unsigned long data;
......@@ -462,11 +472,9 @@ repeat:
fn = timer->function;
data = timer->data;
list_del(&timer->entry);
set_running_timer(base, timer);
smp_wmb();
timer->base = NULL;
spin_unlock_irq(&base->lock);
detach_timer(timer, 1);
spin_unlock_irq(&base->t_base.lock);
{
u32 preempt_count = preempt_count();
fn(data);
......@@ -475,12 +483,11 @@ repeat:
BUG();
}
}
spin_lock_irq(&base->lock);
goto repeat;
spin_lock_irq(&base->t_base.lock);
}
}
set_running_timer(base, NULL);
spin_unlock_irq(&base->lock);
spin_unlock_irq(&base->t_base.lock);
}
#ifdef CONFIG_NO_IDLE_HZ
......@@ -499,7 +506,7 @@ unsigned long next_timer_interrupt(void)
int i, j;
base = &__get_cpu_var(tvec_bases);
spin_lock(&base->lock);
spin_lock(&base->t_base.lock);
expires = base->timer_jiffies + (LONG_MAX >> 1);
list = 0;
......@@ -547,7 +554,7 @@ found:
expires = nte->expires;
}
}
spin_unlock(&base->lock);
spin_unlock(&base->t_base.lock);
return expires;
}
#endif
......@@ -1286,9 +1293,9 @@ static void __devinit init_timers_cpu(int cpu)
{
int j;
tvec_base_t *base;
base = &per_cpu(tvec_bases, cpu);
spin_lock_init(&base->lock);
spin_lock_init(&base->t_base.lock);
for (j = 0; j < TVN_SIZE; j++) {
INIT_LIST_HEAD(base->tv5.vec + j);
INIT_LIST_HEAD(base->tv4.vec + j);
......@@ -1302,22 +1309,16 @@ static void __devinit init_timers_cpu(int cpu)
}
#ifdef CONFIG_HOTPLUG_CPU
static int migrate_timer_list(tvec_base_t *new_base, struct list_head *head)
static void migrate_timer_list(tvec_base_t *new_base, struct list_head *head)
{
struct timer_list *timer;
while (!list_empty(head)) {
timer = list_entry(head->next, struct timer_list, entry);
/* We're locking backwards from __mod_timer order here,
beware deadlock. */
if (!spin_trylock(&timer->lock))
return 0;
list_del(&timer->entry);
detach_timer(timer, 0);
timer->base = &new_base->t_base;
internal_add_timer(new_base, timer);
timer->base = new_base;
spin_unlock(&timer->lock);
}
return 1;
}
static void __devinit migrate_timers(int cpu)
......@@ -1331,39 +1332,24 @@ static void __devinit migrate_timers(int cpu)
new_base = &get_cpu_var(tvec_bases);
local_irq_disable();
again:
/* Prevent deadlocks via ordering by old_base < new_base. */
if (old_base < new_base) {
spin_lock(&new_base->lock);
spin_lock(&old_base->lock);
} else {
spin_lock(&old_base->lock);
spin_lock(&new_base->lock);
}
spin_lock(&new_base->t_base.lock);
spin_lock(&old_base->t_base.lock);
if (old_base->running_timer)
if (old_base->t_base.running_timer)
BUG();
for (i = 0; i < TVR_SIZE; i++)
if (!migrate_timer_list(new_base, old_base->tv1.vec + i))
goto unlock_again;
for (i = 0; i < TVN_SIZE; i++)
if (!migrate_timer_list(new_base, old_base->tv2.vec + i)
|| !migrate_timer_list(new_base, old_base->tv3.vec + i)
|| !migrate_timer_list(new_base, old_base->tv4.vec + i)
|| !migrate_timer_list(new_base, old_base->tv5.vec + i))
goto unlock_again;
spin_unlock(&old_base->lock);
spin_unlock(&new_base->lock);
migrate_timer_list(new_base, old_base->tv1.vec + i);
for (i = 0; i < TVN_SIZE; i++) {
migrate_timer_list(new_base, old_base->tv2.vec + i);
migrate_timer_list(new_base, old_base->tv3.vec + i);
migrate_timer_list(new_base, old_base->tv4.vec + i);
migrate_timer_list(new_base, old_base->tv5.vec + i);
}
spin_unlock(&old_base->t_base.lock);
spin_unlock(&new_base->t_base.lock);
local_irq_enable();
put_cpu_var(tvec_bases);
return;
unlock_again:
/* Avoid deadlock with __mod_timer, by backing off. */
spin_unlock(&old_base->lock);
spin_unlock(&new_base->lock);
cpu_relax();
goto again;
}
#endif /* CONFIG_HOTPLUG_CPU */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment