Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (27 commits)
  MIPS: Loongson 2F: Fix of problems introduced by -mfix-loongson2f-jump
  MIPS: Loongson-2F: Use CONFIG_CPU_JUMP_WORKAROUNDS to control workarounds.
  MIPS: Loongson 2F: Enable fixups of the latest binutils
  MIPS: Loongson: Add CPU_LOONGSON2F_WORKAROUNDS
  MIPS: Kconfig: Make Broadcom SoC support naming consistent
  MIPS: BCM63xx: Update defconfig
  MIPS: oprofile: Fix breakage when CONFIG_OPROFILE=m
  STAGING: octeon-ethernet: Use proper phy addresses for Movidis hardware.
  NET: mdio-octeon: Enable the hardware before using it.
  I2C: Fix section mismatch errors in i2c-octeon.c
  MIPS: Loongson: Fix LOONGSON_ADDRWIN_CFG macro.
  MIPS: Loongson: Fix phys_mem_access_prot() check
  MIPS: Loongson: Fix find_vga_mem_init()
  MIPS: Loongson: Fix typo in gdium mach type string.
  MIPS: Use CKSEG1ADDR for uncached handler
  MIPS: Check for accesses beyond the end of the PGD.
  MIPS: Use uasm_i_ds{r,l}l_safe() instead of uasm_i_ds{r,l}l() in tlbex.c
  MIPS: Add uasm_i_dsrl_safe() and uasm_i_dsll_safe() to uasm.
  MIPS: die() does not call die notifier chain
  MIPS: Swarm, Littlesur: Enable PATA platform driver.
  ...

arch/mips/Kconfig

@@ -49,7 +49,7 @@ config AR7
 	  family: TNETD7100, 7200 and 7300.
 
 config BCM47XX
-	bool "BCM47XX based boards"
+	bool "Broadcom BCM47XX based boards"
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
@@ -509,6 +509,7 @@ config SIBYTE_SWARM
 	bool "Sibyte BCM91250A-SWARM"
 	select BOOT_ELF32
 	select DMA_COHERENT
+	select HAVE_PATA_PLATFORM
 	select NR_CPUS_DEFAULT_2
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
@@ -523,6 +524,7 @@ config SIBYTE_LITTLESUR
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
+	select HAVE_PATA_PLATFORM
 	select NR_CPUS_DEFAULT_2
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
@@ -1305,6 +1307,33 @@ config CPU_CAVIUM_OCTEON
 
 endchoice
 
+if CPU_LOONGSON2F
+config CPU_NOP_WORKAROUNDS
+	bool
+
+config CPU_JUMP_WORKAROUNDS
+	bool
+
+config CPU_LOONGSON2F_WORKAROUNDS
+	bool "Loongson 2F Workarounds"
+	default y
+	select CPU_NOP_WORKAROUNDS
+	select CPU_JUMP_WORKAROUNDS
+	help
+	  Loongson 2F01 / 2F02 processors have the NOP & JUMP issues which
+	  require workarounds.  Without workarounds the system may hang
+	  unexpectedly.  For more information please refer to the gas
+	  -mfix-loongson2f-nop and -mfix-loongson2f-jump options.
+
+	  Loongson 2F03 and later have fixed these issues and no workarounds
+	  are needed.  The workarounds have no significant side effect on them
+	  but may decrease the performance of the system so this option should
+	  be disabled unless the kernel is intended to be run on 2F01 or 2F02
+	  systems.
+
+	  If unsure, please say Y.
+endif # CPU_LOONGSON2F
+
 config SYS_SUPPORTS_ZBOOT
 	bool
 	select HAVE_KERNEL_GZIP

arch/mips/Makefile

@@ -136,6 +136,19 @@ cflags-$(CONFIG_CPU_LOONGSON2E) += \
 	$(call cc-option,-march=loongson2e,-march=r4600)
 cflags-$(CONFIG_CPU_LOONGSON2F) += \
 	$(call cc-option,-march=loongson2f,-march=r4600)
+# enable the workarounds for loongson2f
+ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
+  ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),)
+    $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop)
+  else
+    cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop
+  endif
+  ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),)
+    $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump)
+  else
+    cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump
+  endif
+endif
 
 cflags-$(CONFIG_CPU_MIPS32_R1)	+= $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
 			-Wa,-mips32 -Wa,--trap

arch/mips/alchemy/devboards/db1200/setup.c

@@ -66,12 +66,16 @@ static int __init db1200_arch_init(void)
 	set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
 	bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
 
-	/* do not autoenable these: CPLD has broken edge int handling,
-	 * and the CD handler setup requires manual enabling to work
-	 * around that.
+	/* insert/eject pairs: one of both is always screaming.  To avoid
+	 * issues they must not be automatically enabled when initially
+	 * requested.
 	 */
 	irq_to_desc(DB1200_SD0_INSERT_INT)->status |= IRQ_NOAUTOEN;
 	irq_to_desc(DB1200_SD0_EJECT_INT)->status |= IRQ_NOAUTOEN;
+	irq_to_desc(DB1200_PC0_INSERT_INT)->status |= IRQ_NOAUTOEN;
+	irq_to_desc(DB1200_PC0_EJECT_INT)->status |= IRQ_NOAUTOEN;
+	irq_to_desc(DB1200_PC1_INSERT_INT)->status |= IRQ_NOAUTOEN;
+	irq_to_desc(DB1200_PC1_EJECT_INT)->status |= IRQ_NOAUTOEN;
 
 	return 0;
 }

arch/mips/configs/bcm63xx_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Sun May 31 20:17:18 2009
+# Linux kernel version: 2.6.34-rc2
+# Tue Mar 23 10:36:32 2010
 #
 CONFIG_MIPS=y
 
@@ -9,13 +9,14 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
 # CONFIG_BCM47XX is not set
 CONFIG_BCM63XX=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_NEC_MARKEINS is not set
@@ -26,6 +27,7 @@ CONFIG_BCM63XX=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP28 is not set
@@ -45,13 +47,17 @@ CONFIG_BCM63XX=y
 # CONFIG_WR_PPMC is not set
 # CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
 # CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
 
 #
 # CPU support
 #
+CONFIG_BCM63XX_CPU_6338=y
+CONFIG_BCM63XX_CPU_6345=y
 CONFIG_BCM63XX_CPU_6348=y
 CONFIG_BCM63XX_CPU_6358=y
 CONFIG_BOARD_BCM963XX=y
+CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -69,10 +75,8 @@ CONFIG_CEVT_R4K=y
 CONFIG_CSRC_R4K_LIB=y
 CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_GPIO=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -85,7 +89,8 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
 CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -128,7 +133,7 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -146,9 +151,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 # CONFIG_HIGH_RES_TIMERS is not set
@@ -170,6 +174,7 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -189,15 +194,12 @@ CONFIG_LOCALVERSION=""
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
 # CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -205,11 +207,11 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -223,6 +225,10 @@ CONFIG_BASE_FULL=y
 # CONFIG_EVENTFD is not set
 # CONFIG_SHMEM is not set
 # CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
@@ -231,14 +237,17 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -246,14 +255,41 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -263,15 +299,12 @@ CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 CONFIG_MMU=y
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
 CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
 CONFIG_CARDBUS=y
 
 #
@@ -295,6 +328,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
 CONFIG_NET=y
@@ -333,6 +367,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -347,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -359,7 +395,27 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_CFG80211=y
+CONFIG_NL80211_TESTMODE=y
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+CONFIG_MAC80211=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -471,6 +527,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -484,13 +541,16 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -529,6 +589,7 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
@@ -541,17 +602,48 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
 CONFIG_BCM63XX_ENET=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
+# CONFIG_ATH_COMMON is not set
+CONFIG_B43=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+# CONFIG_B43_PCMCIA is not set
+CONFIG_B43_PIO=y
+# CONFIG_B43_PHY_LP is not set
+CONFIG_B43_LEDS=y
+# CONFIG_B43_DEBUG is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_ZD1211RW is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -574,6 +666,7 @@ CONFIG_BCM63XX_ENET=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -607,6 +700,7 @@ CONFIG_BCM63XX_ENET=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_SERIAL_BCM63XX=y
 CONFIG_SERIAL_BCM63XX_CONSOLE=y
 # CONFIG_UNIX98_PTYS is not set
@@ -629,6 +723,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
@@ -636,6 +735,8 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
@@ -644,16 +745,21 @@ CONFIG_GPIOLIB=y
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
 
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -662,15 +768,16 @@ CONFIG_SSB_POSSIBLE=y
 #
 CONFIG_SSB=y
 CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
 CONFIG_SSB_PCIHOST_POSSIBLE=y
 CONFIG_SSB_PCIHOST=y
-# CONFIG_SSB_B43_PCI_BRIDGE is not set
+CONFIG_SSB_B43_PCI_BRIDGE=y
 CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
 # CONFIG_SSB_PCMCIAHOST is not set
 # CONFIG_SSB_SILENT is not set
 # CONFIG_SSB_DEBUG is not set
 CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-# CONFIG_SSB_DRIVER_PCICORE is not set
+CONFIG_SSB_DRIVER_PCICORE=y
 # CONFIG_SSB_DRIVER_MIPS is not set
 
 #
@@ -680,27 +787,15 @@ CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGA_ARB is not set
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -710,11 +805,7 @@ CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
 #
 # Display device support
 #
-CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -741,13 +832,14 @@ CONFIG_USB=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_HCD_SSB is not set
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
@@ -796,7 +888,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -807,8 +898,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -819,7 +910,29 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
@@ -827,6 +940,10 @@ CONFIG_RTC_LIB=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -838,12 +955,16 @@ CONFIG_RTC_LIB=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-# CONFIG_FILE_LOCKING is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_FILE_LOCKING is not set
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -875,8 +996,6 @@ CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
 CONFIG_MISC_FILESYSTEMS=y
@@ -888,6 +1007,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -898,7 +1018,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -906,7 +1025,46 @@ CONFIG_MISC_FILESYSTEMS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 
 #
@@ -918,29 +1076,23 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_EARLY_PRINTK=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS0,115200"
 # CONFIG_CMDLINE_OVERRIDE is not set
@@ -951,8 +1103,108 @@ CONFIG_CMDLINE="console=ttyS0,115200"
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=y
+# CONFIG_CRYPTO_HW is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #

arch/mips/include/asm/cmpxchg.h

@@ -16,7 +16,7 @@
 ({									\
 	__typeof(*(m)) __ret;						\
 									\
-	if (kernel_uses_llsc && R10000_LLSC_WAR) {				\
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {			\
 		__asm__ __volatile__(					\
 		"	.set	push				\n"	\
 		"	.set	noat				\n"	\

arch/mips/include/asm/mach-loongson/loongson.h

@@ -307,7 +307,7 @@ extern unsigned long _loongson_addrwincfg_base;
  */
 #define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\
 	s##_WIN##w##_BASE = (src); \
-	s##_WIN##w##_MMAP = (src) | ADDRWIN_MAP_DST_##d; \
+	s##_WIN##w##_MMAP = (dst) | ADDRWIN_MAP_DST_##d; \
 	s##_WIN##w##_MASK = ~(size-1); \
 } while (0)
 

arch/mips/include/asm/pgtable-64.h

@@ -120,9 +120,14 @@
 #endif
 #define FIRST_USER_ADDRESS	0UL
 
-#define VMALLOC_START		MAP_BASE
+/*
+ * TLB refill handlers also map the vmalloc area into xuseg.  Avoid
+ * the first couple of pages so NULL pointer dereferences will still
+ * reliably trap.
+ */
+#define VMALLOC_START		(MAP_BASE + (2 * PAGE_SIZE))
 #define VMALLOC_END	\
-	(VMALLOC_START + \
+	(MAP_BASE + \
 	 min(PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE, \
 	     (1UL << cpu_vmbits)) - (1UL << 32))
 

arch/mips/include/asm/ptrace.h

@@ -142,9 +142,9 @@ extern int ptrace_set_watch_regs(struct task_struct *child,
 
 extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit);
 
-extern NORET_TYPE void die(const char *, const struct pt_regs *) ATTRIB_NORET;
+extern NORET_TYPE void die(const char *, struct pt_regs *) ATTRIB_NORET;
 
-static inline void die_if_kernel(const char *str, const struct pt_regs *regs)
+static inline void die_if_kernel(const char *str, struct pt_regs *regs)
 {
 	if (unlikely(!user_mode(regs)))
 		die(str, regs);

arch/mips/include/asm/stackframe.h

@@ -121,7 +121,7 @@
 		.endm
 #else
 		.macro	get_saved_sp	/* Uniprocessor variation */
-#ifdef CONFIG_CPU_LOONGSON2F
+#ifdef CONFIG_CPU_JUMP_WORKAROUNDS
 		/*
 		 * Clear BTB (branch target buffer), forbid RAS (return address
 		 * stack) to workaround the Out-of-order Issue in Loongson2F

arch/mips/include/asm/uasm.h

@@ -167,6 +167,24 @@ static inline void __cpuinit uasm_l##lb(struct uasm_label **lab, u32 *addr) \
 #define uasm_i_ssnop(buf) uasm_i_sll(buf, 0, 0, 1)
 #define uasm_i_ehb(buf) uasm_i_sll(buf, 0, 0, 3)
 
+static inline void uasm_i_dsrl_safe(u32 **p, unsigned int a1,
+				    unsigned int a2, unsigned int a3)
+{
+	if (a3 < 32)
+		uasm_i_dsrl(p, a1, a2, a3);
+	else
+		uasm_i_dsrl32(p, a1, a2, a3 - 32);
+}
+
+static inline void uasm_i_dsll_safe(u32 **p, unsigned int a1,
+				    unsigned int a2, unsigned int a3)
+{
+	if (a3 < 32)
+		uasm_i_dsll(p, a1, a2, a3);
+	else
+		uasm_i_dsll32(p, a1, a2, a3 - 32);
+}
+
 /* Handle relocations. */
 struct uasm_reloc {
 	u32 *addr;

arch/mips/jazz/setup.c

@@ -76,15 +76,9 @@ void __init plat_mem_setup(void)
 
 #ifdef CONFIG_VT
 	screen_info = (struct screen_info) {
-		0, 0,		/* orig-x, orig-y */
-		0,		/* unused */
-		0,		/* orig_video_page */
-		0,		/* orig_video_mode */
-		160,		/* orig_video_cols */
-		0, 0, 0,	/* unused, ega_bx, unused */
-		64,		/* orig_video_lines */
-		0,		/* orig_video_isVGA */
-		16		/* orig_video_points */
+		.orig_video_cols	= 160,
+		.orig_video_lines	= 64,
+		.orig_video_points	= 16,
 	};
 #endif
 

arch/mips/kernel/traps.c

@@ -352,9 +352,10 @@ void show_registers(const struct pt_regs *regs)
 
 static DEFINE_SPINLOCK(die_lock);
 
-void __noreturn die(const char * str, const struct pt_regs * regs)
+void __noreturn die(const char * str, struct pt_regs * regs)
 {
 	static int die_counter;
+	int sig = SIGSEGV;
 #ifdef CONFIG_MIPS_MT_SMTC
 	unsigned long dvpret = dvpe();
 #endif /* CONFIG_MIPS_MT_SMTC */
@@ -365,6 +366,10 @@ void __noreturn die(const char * str, const struct pt_regs * regs)
 #ifdef CONFIG_MIPS_MT_SMTC
 	mips_mt_regdump(dvpret);
 #endif /* CONFIG_MIPS_MT_SMTC */
+
+	if (notify_die(DIE_OOPS, str, regs, 0, current->thread.trap_no, SIGSEGV) == NOTIFY_STOP)
+		sig = 0;
+
 	printk("%s[#%d]:\n", str, ++die_counter);
 	show_registers(regs);
 	add_taint(TAINT_DIE);
@@ -379,7 +384,7 @@ void __noreturn die(const char * str, const struct pt_regs * regs)
 		panic("Fatal exception");
 	}
 
-	do_exit(SIGSEGV);
+	do_exit(sig);
 }
 
 extern struct exception_table_entry __start___dbe_table[];
@@ -1557,12 +1562,7 @@ static char panic_null_cerr[] __cpuinitdata =
 void __cpuinit set_uncached_handler(unsigned long offset, void *addr,
 	unsigned long size)
 {
-#ifdef CONFIG_32BIT
-	unsigned long uncached_ebase = KSEG1ADDR(ebase);
-#endif
-#ifdef CONFIG_64BIT
-	unsigned long uncached_ebase = TO_UNCAC(ebase);
-#endif
+	unsigned long uncached_ebase = CKSEG1ADDR(ebase);
 
 	if (!addr)
 		panic(panic_null_cerr);

arch/mips/loongson/common/machtype.c

@@ -24,7 +24,7 @@ static const char *system_types[] = {
 	[MACH_LEMOTE_FL2F]              "lemote-fuloong-2f-box",
 	[MACH_LEMOTE_ML2F7]             "lemote-mengloong-2f-7inches",
 	[MACH_LEMOTE_YL2F89]            "lemote-yeeloong-2f-8.9inches",
-	[MACH_DEXXON_GDIUM2F10]         "dexxon-gidum-2f-10inches",
+	[MACH_DEXXON_GDIUM2F10]         "dexxon-gdium-2f",
 	[MACH_LEMOTE_NAS]		"lemote-nas-2f",
 	[MACH_LEMOTE_LL2F]              "lemote-lynloong-2f",
 	[MACH_LOONGSON_END]             NULL,

arch/mips/loongson/common/mem.c

@@ -75,7 +75,7 @@ pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 	unsigned long end = offset + size;
 
 	if (__uncached_access(file, offset)) {
-		if (((uca_start && offset) >= uca_start) &&
+		if (uca_start && (offset >= uca_start) &&
 		    (end <= uca_end))
 			return __pgprot((pgprot_val(vma_prot) &
 					 ~_CACHE_MASK) |
@@ -96,7 +96,7 @@ static int __init find_vga_mem_init(void)
 		return 0;
 
 	for_each_pci_dev(dev) {
-		if ((dev->class >> 8) == PCI_CLASS_DISPLAY_VGA) {
+		if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
 			for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) {
 				r = &dev->resource[idx];
 				if (!r->start && r->end)

arch/mips/loongson/common/reset.c

@@ -16,13 +16,31 @@
 
 #include <loongson.h>
 
+static inline void loongson_reboot(void)
+{
+#ifndef CONFIG_CPU_JUMP_WORKAROUNDS
+	((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) ();
+#else
+	void (*func)(void);
+
+	func = (void *)ioremap_nocache(LOONGSON_BOOT_BASE, 4);
+
+	__asm__ __volatile__(
+	"       .set    noat                                            \n"
+	"       jr      %[func]                                         \n"
+	"       .set    at                                              \n"
+	: /* No outputs */
+	: [func] "r" (func));
+#endif
+}
+
 static void loongson_restart(char *command)
 {
 	/* do preparation for reboot */
 	mach_prepare_reboot();
 
 	/* reboot via jumping to boot base address */
-	((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) ();
+	loongson_reboot();
 }
 
 static void loongson_poweroff(void)

arch/mips/loongson/common/setup.c

@@ -41,15 +41,12 @@ void __init plat_mem_setup(void)
 	conswitchp = &vga_con;
 
 	screen_info = (struct screen_info) {
-		0, 25,		/* orig-x, orig-y */
-		    0,		/* unused */
-		    0,		/* orig-video-page */
-		    0,		/* orig-video-mode */
-		    80,		/* orig-video-cols */
-		    0, 0, 0,	/* ega_ax, ega_bx, ega_cx */
-		    25,		/* orig-video-lines */
-		    VIDEO_TYPE_VGAC,	/* orig-video-isVGA */
-		    16		/* orig-video-points */
+		.orig_x			= 0,
+		.orig_y			= 25,
+		.orig_video_cols	= 80,
+		.orig_video_lines	= 25,
+		.orig_video_isVGA	= VIDEO_TYPE_VGAC,
+		.orig_video_points	= 16,
 	};
 #elif defined(CONFIG_DUMMY_CONSOLE)
 	conswitchp = &dummy_con;

arch/mips/loongson/lemote-2f/irq.c

@@ -79,7 +79,7 @@ void mach_irq_dispatch(unsigned int pending)
 	if (pending & CAUSEF_IP7)
 		do_IRQ(LOONGSON_TIMER_IRQ);
 	else if (pending & CAUSEF_IP6) {	/* North Bridge, Perf counter */
-#ifdef CONFIG_OPROFILE
+#if defined(CONFIG_OPROFILE) || defined(CONFIG_OPROFILE_MODULE)
 		do_IRQ(LOONGSON2_PERFCNT_IRQ);
 #endif
 		bonito_irqdispatch();

arch/mips/mm/tlbex.c

@@ -31,6 +31,16 @@
 #include <asm/war.h>
 #include <asm/uasm.h>
 
+/*
+ * TLB load/store/modify handlers.
+ *
+ * Only the fastpath gets synthesized at runtime, the slowpath for
+ * do_page_fault remains normal asm.
+ */
+extern void tlb_do_page_fault_0(void);
+extern void tlb_do_page_fault_1(void);
+
+
 static inline int r45k_bvahwbug(void)
 {
 	/* XXX: We should probe for the presence of this bug, but we don't. */
@@ -83,6 +93,7 @@ enum label_id {
 	label_nopage_tlbm,
 	label_smp_pgtable_change,
 	label_r3000_write_probe_fail,
+	label_large_segbits_fault,
 #ifdef CONFIG_HUGETLB_PAGE
 	label_tlb_huge_update,
 #endif
@@ -101,6 +112,7 @@ UASM_L_LA(_nopage_tlbs)
 UASM_L_LA(_nopage_tlbm)
 UASM_L_LA(_smp_pgtable_change)
 UASM_L_LA(_r3000_write_probe_fail)
+UASM_L_LA(_large_segbits_fault)
 #ifdef CONFIG_HUGETLB_PAGE
 UASM_L_LA(_tlb_huge_update)
 #endif
@@ -157,6 +169,10 @@ static u32 tlb_handler[128] __cpuinitdata;
 static struct uasm_label labels[128] __cpuinitdata;
 static struct uasm_reloc relocs[128] __cpuinitdata;
 
+#ifdef CONFIG_64BIT
+static int check_for_high_segbits __cpuinitdata;
+#endif
+
 #ifndef CONFIG_MIPS_PGD_C0_CONTEXT
 /*
  * CONFIG_MIPS_PGD_C0_CONTEXT implies 64 bit and lack of pgd_current,
@@ -408,7 +424,7 @@ static __cpuinit __maybe_unused void build_convert_pte_to_entrylo(u32 **p,
 		UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC));
 	} else {
 #ifdef CONFIG_64BIT_PHYS_ADDR
-		uasm_i_dsrl(p, reg, reg, ilog2(_PAGE_GLOBAL));
+		uasm_i_dsrl_safe(p, reg, reg, ilog2(_PAGE_GLOBAL));
 #else
 		UASM_i_SRL(p, reg, reg, ilog2(_PAGE_GLOBAL));
 #endif
@@ -532,7 +548,24 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 	 * The vmalloc handling is not in the hotpath.
 	 */
 	uasm_i_dmfc0(p, tmp, C0_BADVADDR);
-	uasm_il_bltz(p, r, tmp, label_vmalloc);
+
+	if (check_for_high_segbits) {
+		/*
+		 * The kernel currently implicitely assumes that the
+		 * MIPS SEGBITS parameter for the processor is
+		 * (PGDIR_SHIFT+PGDIR_BITS) or less, and will never
+		 * allocate virtual addresses outside the maximum
+		 * range for SEGBITS = (PGDIR_SHIFT+PGDIR_BITS). But
+		 * that doesn't prevent user code from accessing the
+		 * higher xuseg addresses.  Here, we make sure that
+		 * everything but the lower xuseg addresses goes down
+		 * the module_alloc/vmalloc path.
+		 */
+		uasm_i_dsrl_safe(p, ptr, tmp, PGDIR_SHIFT + PGD_ORDER + PAGE_SHIFT - 3);
+		uasm_il_bnez(p, r, ptr, label_vmalloc);
+	} else {
+		uasm_il_bltz(p, r, tmp, label_vmalloc);
+	}
 	/* No uasm_i_nop needed here, since the next insn doesn't touch TMP. */
 
 #ifdef CONFIG_MIPS_PGD_C0_CONTEXT
@@ -549,14 +582,14 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 	 * SMTC uses TCBind value as "CPU" index
 	 */
 	uasm_i_mfc0(p, ptr, C0_TCBIND);
-	uasm_i_dsrl(p, ptr, ptr, 19);
+	uasm_i_dsrl_safe(p, ptr, ptr, 19);
 # else
 	/*
 	 * 64 bit SMP running in XKPHYS has smp_processor_id() << 3
 	 * stored in CONTEXT.
 	 */
 	uasm_i_dmfc0(p, ptr, C0_CONTEXT);
-	uasm_i_dsrl(p, ptr, ptr, 23);
+	uasm_i_dsrl_safe(p, ptr, ptr, 23);
 # endif
 	UASM_i_LA_mostly(p, tmp, pgdc);
 	uasm_i_daddu(p, ptr, ptr, tmp);
@@ -569,44 +602,78 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 
 	uasm_l_vmalloc_done(l, *p);
 
-	if (PGDIR_SHIFT - 3 < 32)		/* get pgd offset in bytes */
-		uasm_i_dsrl(p, tmp, tmp, PGDIR_SHIFT-3);
-	else
-		uasm_i_dsrl32(p, tmp, tmp, PGDIR_SHIFT - 3 - 32);
+	/* get pgd offset in bytes */
+	uasm_i_dsrl_safe(p, tmp, tmp, PGDIR_SHIFT - 3);
 
 	uasm_i_andi(p, tmp, tmp, (PTRS_PER_PGD - 1)<<3);
 	uasm_i_daddu(p, ptr, ptr, tmp); /* add in pgd offset */
 #ifndef __PAGETABLE_PMD_FOLDED
 	uasm_i_dmfc0(p, tmp, C0_BADVADDR); /* get faulting address */
 	uasm_i_ld(p, ptr, 0, ptr); /* get pmd pointer */
-	uasm_i_dsrl(p, tmp, tmp, PMD_SHIFT-3); /* get pmd offset in bytes */
+	uasm_i_dsrl_safe(p, tmp, tmp, PMD_SHIFT-3); /* get pmd offset in bytes */
 	uasm_i_andi(p, tmp, tmp, (PTRS_PER_PMD - 1)<<3);
 	uasm_i_daddu(p, ptr, ptr, tmp); /* add in pmd offset */
 #endif
 }
 
+enum vmalloc64_mode {not_refill, refill};
 /*
  * BVADDR is the faulting address, PTR is scratch.
  * PTR will hold the pgd for vmalloc.
  */
 static void __cpuinit
 build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
-			unsigned int bvaddr, unsigned int ptr)
+			unsigned int bvaddr, unsigned int ptr,
+			enum vmalloc64_mode mode)
 {
 	long swpd = (long)swapper_pg_dir;
+	int single_insn_swpd;
+	int did_vmalloc_branch = 0;
+
+	single_insn_swpd = uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd);
 
 	uasm_l_vmalloc(l, *p);
 
-	if (uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd)) {
-		uasm_il_b(p, r, label_vmalloc_done);
-		uasm_i_lui(p, ptr, uasm_rel_hi(swpd));
-	} else {
-		UASM_i_LA_mostly(p, ptr, swpd);
-		uasm_il_b(p, r, label_vmalloc_done);
-		if (uasm_in_compat_space_p(swpd))
-			uasm_i_addiu(p, ptr, ptr, uasm_rel_lo(swpd));
-		else
-			uasm_i_daddiu(p, ptr, ptr, uasm_rel_lo(swpd));
+	if (mode == refill && check_for_high_segbits) {
+		if (single_insn_swpd) {
+			uasm_il_bltz(p, r, bvaddr, label_vmalloc_done);
+			uasm_i_lui(p, ptr, uasm_rel_hi(swpd));
+			did_vmalloc_branch = 1;
+			/* fall through */
+		} else {
+			uasm_il_bgez(p, r, bvaddr, label_large_segbits_fault);
+		}
+	}
+	if (!did_vmalloc_branch) {
+		if (uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd)) {
+			uasm_il_b(p, r, label_vmalloc_done);
+			uasm_i_lui(p, ptr, uasm_rel_hi(swpd));
+		} else {
+			UASM_i_LA_mostly(p, ptr, swpd);
+			uasm_il_b(p, r, label_vmalloc_done);
+			if (uasm_in_compat_space_p(swpd))
+				uasm_i_addiu(p, ptr, ptr, uasm_rel_lo(swpd));
+			else
+				uasm_i_daddiu(p, ptr, ptr, uasm_rel_lo(swpd));
+		}
+	}
+	if (mode == refill && check_for_high_segbits) {
+		uasm_l_large_segbits_fault(l, *p);
+		/*
+		 * We get here if we are an xsseg address, or if we are
+		 * an xuseg address above (PGDIR_SHIFT+PGDIR_BITS) boundary.
+		 *
+		 * Ignoring xsseg (assume disabled so would generate
+		 * (address errors?), the only remaining possibility
+		 * is the upper xuseg addresses.  On processors with
+		 * TLB_SEGBITS <= PGDIR_SHIFT+PGDIR_BITS, these
+		 * addresses would have taken an address error. We try
+		 * to mimic that here by taking a load/istream page
+		 * fault.
+		 */
+		UASM_i_LA(p, ptr, (unsigned long)tlb_do_page_fault_0);
+		uasm_i_jr(p, ptr);
+		uasm_i_nop(p);
 	}
 }
 
@@ -720,9 +787,9 @@ static void __cpuinit build_update_entries(u32 **p, unsigned int tmp,
 			UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
 			UASM_i_ROTR(p, ptep, ptep, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC));
 		} else {
-			uasm_i_dsrl(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */
+			uasm_i_dsrl_safe(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */
 			UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
-			uasm_i_dsrl(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */
+			uasm_i_dsrl_safe(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */
 		}
 		UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */
 	} else {
@@ -793,9 +860,9 @@ static void __cpuinit build_r4000_tlb_refill_handler(void)
 		uasm_i_dmfc0(&p, K0, C0_BADVADDR);
 		uasm_i_dmfc0(&p, K1, C0_ENTRYHI);
 		uasm_i_xor(&p, K0, K0, K1);
-		uasm_i_dsrl32(&p, K1, K0, 62 - 32);
-		uasm_i_dsrl(&p, K0, K0, 12 + 1);
-		uasm_i_dsll32(&p, K0, K0, 64 + 12 + 1 - segbits - 32);
+		uasm_i_dsrl_safe(&p, K1, K0, 62);
+		uasm_i_dsrl_safe(&p, K0, K0, 12 + 1);
+		uasm_i_dsll_safe(&p, K0, K0, 64 + 12 + 1 - segbits);
 		uasm_i_or(&p, K0, K0, K1);
 		uasm_il_bnez(&p, &r, K0, label_leave);
 		/* No need for uasm_i_nop */
@@ -825,7 +892,7 @@ static void __cpuinit build_r4000_tlb_refill_handler(void)
 #endif
 
 #ifdef CONFIG_64BIT
-	build_get_pgd_vmalloc64(&p, &l, &r, K0, K1);
+	build_get_pgd_vmalloc64(&p, &l, &r, K0, K1, refill);
 #endif
 
 	/*
@@ -934,15 +1001,6 @@ static void __cpuinit build_r4000_tlb_refill_handler(void)
 	dump_handler((u32 *)ebase, 64);
 }
 
-/*
- * TLB load/store/modify handlers.
- *
- * Only the fastpath gets synthesized at runtime, the slowpath for
- * do_page_fault remains normal asm.
- */
-extern void tlb_do_page_fault_0(void);
-extern void tlb_do_page_fault_1(void);
-
 /*
  * 128 instructions for the fastpath handler is generous and should
  * never be exceeded.
@@ -1302,7 +1360,7 @@ build_r4000_tlbchange_handler_tail(u32 **p, struct uasm_label **l,
 	uasm_i_eret(p); /* return from trap */
 
 #ifdef CONFIG_64BIT
-	build_get_pgd_vmalloc64(p, l, r, tmp, ptr);
+	build_get_pgd_vmalloc64(p, l, r, tmp, ptr, not_refill);
 #endif
 }
 
@@ -1322,9 +1380,9 @@ static void __cpuinit build_r4000_tlb_load_handler(void)
 		uasm_i_dmfc0(&p, K0, C0_BADVADDR);
 		uasm_i_dmfc0(&p, K1, C0_ENTRYHI);
 		uasm_i_xor(&p, K0, K0, K1);
-		uasm_i_dsrl32(&p, K1, K0, 62 - 32);
-		uasm_i_dsrl(&p, K0, K0, 12 + 1);
-		uasm_i_dsll32(&p, K0, K0, 64 + 12 + 1 - segbits - 32);
+		uasm_i_dsrl_safe(&p, K1, K0, 62);
+		uasm_i_dsrl_safe(&p, K0, K0, 12 + 1);
+		uasm_i_dsll_safe(&p, K0, K0, 64 + 12 + 1 - segbits);
 		uasm_i_or(&p, K0, K0, K1);
 		uasm_il_bnez(&p, &r, K0, label_leave);
 		/* No need for uasm_i_nop */
@@ -1526,6 +1584,10 @@ void __cpuinit build_tlb_refill_handler(void)
 	 */
 	static int run_once = 0;
 
+#ifdef CONFIG_64BIT
+	check_for_high_segbits = current_cpu_data.vmbits > (PGDIR_SHIFT + PGD_ORDER + PAGE_SHIFT - 3);
+#endif
+
 	switch (current_cpu_type()) {
 	case CPU_R2000:
 	case CPU_R3000:

arch/mips/nxp/pnx8550/common/reset.c

@@ -20,6 +20,8 @@
  * Reset the PNX8550 board.
  *
  */
+#include <linux/kernel.h>
+
 #include <asm/reboot.h>
 #include <glb.h>
 

arch/mips/pci/pci-sb1250.c

@@ -37,6 +37,7 @@
 #include <linux/mm.h>
 #include <linux/console.h>
 #include <linux/tty.h>
+#include <linux/vt.h>
 
 #include <asm/io.h>
 
@@ -254,7 +255,7 @@ static int __init sb1250_pcibios_init(void)
 	 * XXX ehs: Should this happen in PCI Device mode?
 	 */
 	io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024);
-	sb1250_controller.io_map_base = io_map_base;
+	sb1250_controller.io_map_base = (unsigned long)io_map_base;
 	set_io_port_base((unsigned long)io_map_base);
 
 #ifdef CONFIG_SIBYTE_HAS_LDT

arch/mips/sgi-ip22/ip22-berr.c

@@ -89,7 +89,7 @@ static void print_buserr(void)
 void ip22_be_interrupt(int irq)
 {
 	const int field = 2 * sizeof(unsigned long);
-	const struct pt_regs *regs = get_irq_regs();
+	struct pt_regs *regs = get_irq_regs();
 
 	save_and_clear_buserr();
 	print_buserr();

arch/mips/sgi-ip22/ip28-berr.c

@@ -453,7 +453,7 @@ mips_be_fatal:
 
 void ip22_be_interrupt(int irq)
 {
-	const struct pt_regs *regs = get_irq_regs();
+	struct pt_regs *regs = get_irq_regs();
 
 	count_be_interrupt++;
 

arch/mips/sibyte/swarm/setup.c

@@ -145,15 +145,14 @@ void __init plat_mem_setup(void)
 
 #ifdef CONFIG_VT
 	screen_info = (struct screen_info) {
-		0, 0,           /* orig-x, orig-y */
-		0,              /* unused */
-		52,             /* orig_video_page */
-		3,              /* orig_video_mode */
-		80,             /* orig_video_cols */
-		4626, 3, 9,     /* unused, ega_bx, unused */
-		25,             /* orig_video_lines */
-		0x22,           /* orig_video_isVGA */
-		16              /* orig_video_points */
+		.orig_video_page	= 52,
+		.orig_video_mode	= 3,
+		.orig_video_cols	= 80,
+		.flags			= 12,
+		.orig_video_ega_bx	= 3,
+		.orig_video_lines	= 25,
+		.orig_video_isVGA	= 0x22,
+		.orig_video_points	= 16,
        };
        /* XXXKW for CFE, get lines/cols from environment */
 #endif

drivers/dma/txx9dmac.c

@@ -1359,3 +1359,5 @@ module_exit(txx9dmac_exit);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("TXx9 DMA Controller driver");
 MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
+MODULE_ALIAS("platform:txx9dmac");
+MODULE_ALIAS("platform:txx9dmac-chan");

drivers/i2c/busses/i2c-octeon.c

@@ -447,7 +447,7 @@ static struct i2c_adapter octeon_i2c_ops = {
 /**
  * octeon_i2c_setclock - Calculate and set clock divisors.
  */
-static int __init octeon_i2c_setclock(struct octeon_i2c *i2c)
+static int __devinit octeon_i2c_setclock(struct octeon_i2c *i2c)
 {
 	int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff;
 	int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000;
@@ -490,7 +490,7 @@ static int __init octeon_i2c_setclock(struct octeon_i2c *i2c)
 	return 0;
 }
 
-static int __init octeon_i2c_initlowlevel(struct octeon_i2c *i2c)
+static int __devinit octeon_i2c_initlowlevel(struct octeon_i2c *i2c)
 {
 	u8 status;
 	int tries;

drivers/net/phy/mdio-octeon.c

@@ -88,6 +88,7 @@ static int octeon_mdiobus_write(struct mii_bus *bus, int phy_id,
 static int __init octeon_mdiobus_probe(struct platform_device *pdev)
 {
 	struct octeon_mdiobus *bus;
+	union cvmx_smix_en smi_en;
 	int i;
 	int err = -ENOENT;
 
@@ -103,6 +104,10 @@ static int __init octeon_mdiobus_probe(struct platform_device *pdev)
 	if (!bus->mii_bus)
 		goto err;
 
+	smi_en.u64 = 0;
+	smi_en.s.en = 1;
+	cvmx_write_csr(CVMX_SMIX_EN(bus->unit), smi_en.u64);
+
 	/*
 	 * Standard Octeon evaluation boards don't support phy
 	 * interrupts, we need to poll.
@@ -133,17 +138,22 @@ err_register:
 
 err:
 	devm_kfree(&pdev->dev, bus);
+	smi_en.u64 = 0;
+	cvmx_write_csr(CVMX_SMIX_EN(bus->unit), smi_en.u64);
 	return err;
 }
 
 static int __exit octeon_mdiobus_remove(struct platform_device *pdev)
 {
 	struct octeon_mdiobus *bus;
+	union cvmx_smix_en smi_en;
 
 	bus = dev_get_drvdata(&pdev->dev);
 
 	mdiobus_unregister(bus->mii_bus);
 	mdiobus_free(bus->mii_bus);
+	smi_en.u64 = 0;
+	cvmx_write_csr(CVMX_SMIX_EN(bus->unit), smi_en.u64);
 	return 0;
 }
 

drivers/pcmcia/db1xxx_ss.c

@@ -146,7 +146,6 @@ static irqreturn_t db1200_pcmcia_cdirq(int irq, void *data)
 static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock)
 {
 	int ret;
-	unsigned long flags;
 
 	if (sock->stschg_irq != -1) {
 		ret = request_irq(sock->stschg_irq, db1000_pcmcia_stschgirq,
@@ -162,30 +161,23 @@ static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock)
 	 * active one disabled.
 	 */
 	if (sock->board_type == BOARD_TYPE_DB1200) {
-		local_irq_save(flags);
-
 		ret = request_irq(sock->insert_irq, db1200_pcmcia_cdirq,
 				  IRQF_DISABLED, "pcmcia_insert", sock);
-		if (ret) {
-			local_irq_restore(flags);
+		if (ret)
 			goto out1;
-		}
 
 		ret = request_irq(sock->eject_irq, db1200_pcmcia_cdirq,
 				  IRQF_DISABLED, "pcmcia_eject", sock);
 		if (ret) {
 			free_irq(sock->insert_irq, sock);
-			local_irq_restore(flags);
 			goto out1;
 		}
 
-		/* disable the currently active one */
+		/* enable the currently silent one */
 		if (db1200_card_inserted(sock))
-			disable_irq_nosync(sock->insert_irq);
+			enable_irq(sock->eject_irq);
 		else
-			disable_irq_nosync(sock->eject_irq);
-
-		local_irq_restore(flags);
+			enable_irq(sock->insert_irq);
 	} else {
 		/* all other (older) Db1x00 boards use a GPIO to show
 		 * card detection status:  use both-edge triggers.

drivers/staging/octeon/cvmx-helper-board.c

@@ -153,6 +153,14 @@ int cvmx_helper_board_get_mii_address(int ipd_port)
 		 * through switch.
 		 */
 		return -1;
+
+	case CVMX_BOARD_TYPE_CUST_WSX16:
+		if (ipd_port >= 0 && ipd_port <= 3)
+			return ipd_port;
+		else if (ipd_port >= 16 && ipd_port <= 19)
+			return ipd_port - 16 + 4;
+		else
+			return -1;
 	}
 
 	/* Some unknown board. Somebody forgot to update this function... */

sound/soc/txx9/txx9aclc-ac97.c

@@ -254,3 +254,4 @@ module_exit(txx9aclc_ac97_exit);
 MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
 MODULE_DESCRIPTION("TXx9 ACLC AC97 driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:txx9aclc-ac97");

sound/soc/txx9/txx9aclc-generic.c

@@ -96,3 +96,4 @@ module_exit(txx9aclc_generic_exit);
 MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
 MODULE_DESCRIPTION("Generic TXx9 ACLC ALSA SoC audio driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:txx9aclc-generic");