Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (88 commits)
  Blackfin: Convert BUG() to use unreachable()
  Blackfin: define __NR_recvmmsg
  Blackfin: drop duplicate sched_clock
  Blackfin: NOMPU: skip DMA ICPLB hole when it is redundant
  Blackfin: MPU: add missing __init markings
  Blackfin: add support for TIF_NOTIFY_RESUME
  Blackfin: kgdb_test: clean up code a bit
  Blackfin: convert kgdbtest to proc_fops
  Blackfin: convert cyc2ns() to clocksource_cyc2ns()
  Blackfin: ip0x: pull in asm/portmux.h for P_xxx defines
  Blackfin: drop unused ax88180 resources
  Blackfin: bf537-stamp: add ADF702x network driver resources
  Blackfin: bf537-stamp: add CAN resources
  Blackfin: bf537-stamp: add AD5258 i2c address
  Blackfin: bf537-stamp: add adau1761 i2c address
  Blackfin: bf537-stamp: add adau1371 i2c address
  Blackfin: bf537-stamp: add ADP8870 resources
  Blackfin: bf537-stamp: kill AD714x board-specific Kconfigs
  Blackfin: bf537-stamp: update ADP5520 resources
  Blackfin: bf537-stamp: add ADXL346 orientation sensing support
  ...

Documentation/blackfin/00-INDEX

 00-INDEX
 	- This file
 
-cache-lock.txt
-	- HOWTO for blackfin cache locking.
-
 cachefeatures.txt
 	- Supported cache features.
 

Documentation/blackfin/Makefile

+obj-m := gptimers-example.o
+
+all: modules
+
+modules clean:
+	$(MAKE) -C ../.. SUBDIRS=$(PWD) $@

Documentation/blackfin/cache-lock.txt

-/*
- * File:         Documentation/blackfin/cache-lock.txt
- * Based on:
- * Author:
- *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
- *
- * Rev:          $Id: cache-lock.txt 2384 2006-11-01 04:12:43Z magicyang $
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- */
-
-How to lock your code in cache in uClinux/blackfin
---------------------------------------------------
-
-There are only a few steps required to lock your code into the cache.
-Currently you can lock the code by Way.
-
-Below are the interface provided for locking the cache.
-
-
-1. cache_grab_lock(int Ways);
-
-This function grab the lock for locking your code into the cache specified
-by Ways.
-
-
-2. cache_lock(int Ways);
-
-This function should be called after your critical code has been executed.
-Once the critical code exits, the code is now loaded into the cache. This
-function locks the code into the cache.
-
-
-So, the example sequence will be:
-
-	cache_grab_lock(WAY0_L);	/* Grab the lock */
-
-	critical_code();		/* Execute the code of interest */
-
-	cache_lock(WAY0_L);		/* Lock the cache */
-
-Where WAY0_L signifies WAY0 locking.

Documentation/blackfin/cachefeatures.txt

@@ -41,16 +41,6 @@
 		icplb_flush();
 		dcplb_flush();
 
-	- Locking the cache.
-
-		cache_grab_lock();
-		cache_lock();
-
-	Please refer linux-2.6.x/Documentation/blackfin/cache-lock.txt for how to
-	lock the cache.
-
-	Locking the cache is optional feature.
-
 	- Miscellaneous cache functions.
 
 		flush_cache_all();

Documentation/blackfin/gptimers-example.c

+/*
+ * Simple gptimers example
+ *	http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:gptimers
+ *
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <asm/gptimers.h>
+#include <asm/portmux.h>
+
+/* ... random driver includes ... */
+
+#define DRIVER_NAME "gptimer_example"
+
+struct gptimer_data {
+	uint32_t period, width;
+};
+static struct gptimer_data data;
+
+/* ... random driver state ... */
+
+static irqreturn_t gptimer_example_irq(int irq, void *dev_id)
+{
+	struct gptimer_data *data = dev_id;
+
+	/* make sure it was our timer which caused the interrupt */
+	if (!get_gptimer_intr(TIMER5_id))
+		return IRQ_NONE;
+
+	/* read the width/period values that were captured for the waveform */
+	data->width = get_gptimer_pwidth(TIMER5_id);
+	data->period = get_gptimer_period(TIMER5_id);
+
+	/* acknowledge the interrupt */
+	clear_gptimer_intr(TIMER5_id);
+
+	/* tell the upper layers we took care of things */
+	return IRQ_HANDLED;
+}
+
+/* ... random driver code ... */
+
+static int __init gptimer_example_init(void)
+{
+	int ret;
+
+	/* grab the peripheral pins */
+	ret = peripheral_request(P_TMR5, DRIVER_NAME);
+	if (ret) {
+		printk(KERN_NOTICE DRIVER_NAME ": peripheral request failed\n");
+		return ret;
+	}
+
+	/* grab the IRQ for the timer */
+	ret = request_irq(IRQ_TIMER5, gptimer_example_irq, IRQF_SHARED, DRIVER_NAME, &data);
+	if (ret) {
+		printk(KERN_NOTICE DRIVER_NAME ": IRQ request failed\n");
+		peripheral_free(P_TMR5);
+		return ret;
+	}
+
+	/* setup the timer and enable it */
+	set_gptimer_config(TIMER5_id, WDTH_CAP | PULSE_HI | PERIOD_CNT | IRQ_ENA);
+	enable_gptimers(TIMER5bit);
+
+	return 0;
+}
+module_init(gptimer_example_init);
+
+static void __exit gptimer_example_exit(void)
+{
+	disable_gptimers(TIMER5bit);
+	free_irq(IRQ_TIMER5, &data);
+	peripheral_free(P_TMR5);
+}
+module_exit(gptimer_example_exit);
+
+MODULE_LICENSE("BSD");

arch/blackfin/Kconfig

@@ -32,6 +32,9 @@ config BLACKFIN
 	select HAVE_OPROFILE
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 
+config GENERIC_CSUM
+	def_bool y
+
 config GENERIC_BUG
 	def_bool y
 	depends on BUG
@@ -177,7 +180,7 @@ config BF539
 	help
 	  BF539 Processor Support.
 
-config BF542
+config BF542_std
 	bool "BF542"
 	help
 	  BF542 Processor Support.
@@ -187,7 +190,7 @@ config BF542M
 	help
 	  BF542 Processor Support.
 
-config BF544
+config BF544_std
 	bool "BF544"
 	help
 	  BF544 Processor Support.
@@ -197,7 +200,7 @@ config BF544M
 	help
 	  BF544 Processor Support.
 
-config BF547
+config BF547_std
 	bool "BF547"
 	help
 	  BF547 Processor Support.
@@ -207,7 +210,7 @@ config BF547M
 	help
 	  BF547 Processor Support.
 
-config BF548
+config BF548_std
 	bool "BF548"
 	help
 	  BF548 Processor Support.
@@ -217,7 +220,7 @@ config BF548M
 	help
 	  BF548 Processor Support.
 
-config BF549
+config BF549_std
 	bool "BF549"
 	help
 	  BF549 Processor Support.
@@ -311,31 +314,11 @@ config BF_REV_NONE
 
 endchoice
 
-config BF51x
-	bool
-	depends on (BF512 || BF514 || BF516 || BF518)
-	default y
-
-config BF52x
-	bool
-	depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527)
-	default y
-
 config BF53x
 	bool
 	depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
 	default y
 
-config BF54xM
-	bool
-	depends on (BF542M || BF544M || BF547M || BF548M || BF549M)
-	default y
-
-config BF54x
-	bool
-	depends on (BF542 || BF544 || BF547 || BF548 || BF549 || BF54xM)
-	default y
-
 config MEM_GENERIC_BOARD
 	bool
 	depends on GENERIC_BOARD
@@ -917,6 +900,12 @@ config DMA_UNCACHED_2M
 	bool "Enable 2M DMA region"
 config DMA_UNCACHED_1M
 	bool "Enable 1M DMA region"
+config DMA_UNCACHED_512K
+	bool "Enable 512K DMA region"
+config DMA_UNCACHED_256K
+	bool "Enable 256K DMA region"
+config DMA_UNCACHED_128K
+	bool "Enable 128K DMA region"
 config DMA_UNCACHED_NONE
 	bool "Disable DMA region"
 endchoice
@@ -1278,6 +1267,8 @@ source "net/Kconfig"
 
 source "drivers/Kconfig"
 
+source "drivers/firmware/Kconfig"
+
 source "fs/Kconfig"
 
 source "arch/blackfin/Kconfig.debug"

arch/blackfin/Makefile

@@ -16,6 +16,7 @@ GZFLAGS          := -9
 KBUILD_CFLAGS           += $(call cc-option,-mno-fdpic)
 KBUILD_AFLAGS           += $(call cc-option,-mno-fdpic)
 CFLAGS_MODULE    += -mlong-calls
+LDFLAGS_MODULE   += -m elf32bfin
 KALLSYMS         += --symbol-prefix=_
 
 KBUILD_DEFCONFIG := BF537-STAMP_defconfig
@@ -137,7 +138,7 @@ archclean:
 
 INSTALL_PATH ?= /tftpboot
 boot := arch/$(ARCH)/boot
-BOOT_TARGETS = vmImage vmImage.bz2 vmImage.gz vmImage.lzma
+BOOT_TARGETS = vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma
 PHONY += $(BOOT_TARGETS) install
 KBUILD_IMAGE := $(boot)/vmImage
 
@@ -151,6 +152,7 @@ install:
 
 define archhelp
   echo  '* vmImage         - Alias to selected kernel format (vmImage.gz by default)'
+  echo  '  vmImage.bin     - Uncompressed Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.bin)'
   echo  '  vmImage.bz2     - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.bz2)'
   echo  '* vmImage.gz      - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.gz)'
   echo  '  vmImage.lzma    - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzma)'

arch/blackfin/boot/Makefile

@@ -8,7 +8,7 @@
 
 MKIMAGE := $(srctree)/scripts/mkuboot.sh
 
-targets := vmImage vmImage.bz2 vmImage.gz vmImage.lzma
+targets := vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma
 extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
 
 quiet_cmd_uimage = UIMAGE  $@
@@ -29,6 +29,9 @@ $(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
 $(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,lzma)
 
+$(obj)/vmImage.bin: $(obj)/vmlinux.bin
+	$(call if_changed,uimage,none)
+
 $(obj)/vmImage.bz2: $(obj)/vmlinux.bin.bz2
 	$(call if_changed,uimage,bzip2)
 
@@ -38,6 +41,7 @@ $(obj)/vmImage.gz: $(obj)/vmlinux.bin.gz
 $(obj)/vmImage.lzma: $(obj)/vmlinux.bin.lzma
 	$(call if_changed,uimage,lzma)
 
+suffix-y                      := bin
 suffix-$(CONFIG_KERNEL_GZIP)  := gz
 suffix-$(CONFIG_KERNEL_BZIP2) := bz2
 suffix-$(CONFIG_KERNEL_LZMA)  := lzma

arch/blackfin/configs/BF518F-EZBRD_defconfig

@@ -67,6 +67,7 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
@@ -316,6 +317,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
@@ -438,17 +440,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
-CONFIG_NET_DSA=y
-# CONFIG_NET_DSA_TAG_DSA is not set
-# CONFIG_NET_DSA_TAG_EDSA is not set
-# CONFIG_NET_DSA_TAG_TRAILER is not set
-CONFIG_NET_DSA_TAG_STPID=y
-# CONFIG_NET_DSA_MV88E6XXX is not set
-# CONFIG_NET_DSA_MV88E6060 is not set
-# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
-# CONFIG_NET_DSA_MV88E6123_61_65 is not set
-CONFIG_NET_DSA_KSZ8893M=y
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set

arch/blackfin/configs/BF526-EZBRD_defconfig

@@ -67,6 +67,7 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
@@ -321,6 +322,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set

arch/blackfin/configs/BF527-EZKIT_defconfig

@@ -67,6 +67,7 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
@@ -321,6 +322,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=y
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set

arch/blackfin/configs/BF533-EZKIT_defconfig

@@ -67,6 +67,7 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
@@ -283,6 +284,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set

arch/blackfin/configs/BF533-STAMP_defconfig

@@ -67,6 +67,7 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
@@ -283,6 +284,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set

arch/blackfin/configs/BF537-STAMP_defconfig

@@ -67,6 +67,7 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
@@ -290,6 +291,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
@@ -704,10 +706,7 @@ CONFIG_CONFIG_INPUT_PCF8574=m
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #

arch/blackfin/configs/BF538-EZKIT_defconfig

@@ -67,6 +67,7 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
@@ -301,6 +302,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set

arch/blackfin/configs/BlackStamp_defconfig

@@ -66,6 +66,7 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
@@ -275,6 +276,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=y
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set

arch/blackfin/configs/H8606_defconfig

@@ -67,6 +67,7 @@ CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
@@ -249,6 +250,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_LARGE_ALLOCS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=y
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y

arch/blackfin/configs/IP0X_defconfig

@@ -68,6 +68,7 @@ CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
@@ -261,6 +262,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_LARGE_ALLOCS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 # CONFIG_BFIN_GPTIMERS is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y

arch/blackfin/configs/PNAV-10_defconfig

@@ -63,6 +63,7 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
@@ -285,6 +286,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=y
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set

arch/blackfin/configs/SRV1_defconfig

@@ -72,6 +72,7 @@ CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
@@ -271,6 +272,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_LARGE_ALLOCS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_DMA_UNCACHED_2M=y
 # CONFIG_DMA_UNCACHED_1M is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -700,7 +702,7 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_YEALINK is not set
 CONFIG_INPUT_UINPUT=y
 # CONFIG_BF53X_PFBUTTONS is not set
-# CONFIG_TWI_KEYPAD is not set
+# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports

arch/blackfin/include/asm/bfin-global.h

@@ -11,9 +11,6 @@
 
 #ifndef __ASSEMBLY__
 
-#include <asm/sections.h>
-#include <asm/ptrace.h>
-#include <asm/user.h>
 #include <linux/linkage.h>
 #include <linux/types.h>
 
@@ -23,6 +20,12 @@
 # define DMA_UNCACHED_REGION (2 * 1024 * 1024)
 #elif defined(CONFIG_DMA_UNCACHED_1M)
 # define DMA_UNCACHED_REGION (1024 * 1024)
+#elif defined(CONFIG_DMA_UNCACHED_512K)
+# define DMA_UNCACHED_REGION (512 * 1024)
+#elif defined(CONFIG_DMA_UNCACHED_256K)
+# define DMA_UNCACHED_REGION (256 * 1024)
+#elif defined(CONFIG_DMA_UNCACHED_128K)
+# define DMA_UNCACHED_REGION (128 * 1024)
 #else
 # define DMA_UNCACHED_REGION (0)
 #endif
@@ -35,6 +38,7 @@ extern unsigned long get_sclk(void);
 extern unsigned long sclk_to_usecs(unsigned long sclk);
 extern unsigned long usecs_to_sclk(unsigned long usecs);
 
+struct pt_regs;
 extern void dump_bfin_process(struct pt_regs *regs);
 extern void dump_bfin_mem(struct pt_regs *regs);
 extern void dump_bfin_trace_buffer(void);

arch/blackfin/include/asm/bug.h

@@ -47,7 +47,7 @@
 #define BUG()								\
 	do {								\
 		_BUG_OR_WARN(0);					\
-		for (;;);						\
+		unreachable();						\
 	} while (0)
 
 #define WARN_ON(condition)							\

arch/blackfin/include/asm/cacheflush.h

@@ -10,6 +10,7 @@
 #define _BLACKFIN_CACHEFLUSH_H
 
 #include <asm/blackfin.h>	/* for SSYNC() */
+#include <asm/sections.h>	/* for _ramend */
 
 extern void blackfin_icache_flush_range(unsigned long start_address, unsigned long end_address);
 extern void blackfin_dcache_flush_range(unsigned long start_address, unsigned long end_address);

arch/blackfin/include/asm/checksum.h

@@ -8,64 +8,13 @@
 #ifndef _BFIN_CHECKSUM_H
 #define _BFIN_CHECKSUM_H
 
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-__wsum csum_partial_copy(const void *src, void *dst,
-			       int len, __wsum sum);
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
-					  int len, __wsum sum, int *csum_err);
-
-#define csum_partial_copy_nocheck(src, dst, len, sum)	\
-	csum_partial_copy((src), (dst), (len), (sum))
-
-__sum16 ip_fast_csum(unsigned char *iph, unsigned int ihl);
-
-/*
- *	Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
-	while (sum >> 16)
-		sum = (sum & 0xffff) + (sum >> 16);
-	return ((~(sum << 16)) >> 16);
-}
-
 /*
  * computes the checksum of the TCP/UDP pseudo-header
  * returns a 16-bit checksum, already complemented
  */
 
 static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+__csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
 		   unsigned short proto, __wsum sum)
 {
 	unsigned int carry;
@@ -88,19 +37,8 @@ csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
 
 	return (sum);
 }
+#define csum_tcpudp_nofold __csum_tcpudp_nofold
 
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-extern __sum16 ip_compute_csum(const void *buff, int len);
+#include <asm-generic/checksum.h>
 
-#endif				/* _BFIN_CHECKSUM_H */
+#endif

arch/blackfin/include/asm/clocks.h

@@ -9,6 +9,8 @@
 #ifndef _BFIN_CLOCKS_H
 #define _BFIN_CLOCKS_H
 
+#include <asm/dpmc.h>
+
 #ifdef CONFIG_CCLK_DIV_1
 # define CONFIG_CCLK_ACT_DIV   CCLK_DIV1
 # define CONFIG_CCLK_DIV 1

arch/blackfin/include/asm/dma-mapping.h

@@ -7,9 +7,9 @@
 #ifndef _BLACKFIN_DMA_MAPPING_H
 #define _BLACKFIN_DMA_MAPPING_H
 
-#include <asm/scatterlist.h>
+#include <asm/cacheflush.h>
+struct scatterlist;
 
-void dma_alloc_init(unsigned long start, unsigned long end);
 void *dma_alloc_coherent(struct device *dev, size_t size,
 			 dma_addr_t *dma_handle, gfp_t gfp);
 void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
@@ -20,13 +20,51 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
  */
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#define dma_supported(d, m)         (1)
+#define dma_get_cache_alignment()   (32)
+#define dma_is_consistent(d, h)     (1)
 
-static inline
-int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+static inline int
+dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+		return -EIO;
+
+	*dev->dma_mask = dma_mask;
+
+	return 0;
+}
+
+static inline int
+dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
 
+extern void
+__dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir);
+static inline void
+_dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir)
+{
+	if (!__builtin_constant_p(dir)) {
+		__dma_sync(addr, size, dir);
+		return;
+	}
+
+	switch (dir) {
+	case DMA_NONE:
+		BUG();
+	case DMA_TO_DEVICE:		/* writeback only */
+		flush_dcache_range(addr, addr + size);
+		break;
+	case DMA_FROM_DEVICE: /* invalidate only */
+	case DMA_BIDIRECTIONAL: /* flush and invalidate */
+		/* Blackfin has no dedicated invalidate (it includes a flush) */
+		invalidate_dcache_range(addr, addr + size);
+		break;
+	}
+}
+
 /*
  * Map a single buffer of the indicated size for DMA in streaming mode.
  * The 32-bit bus address to use is returned.
@@ -34,8 +72,13 @@ int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
  * Once the device is given the dma address, the device owns this memory
  * until either pci_unmap_single or pci_dma_sync_single is performed.
  */
-extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
-				 enum dma_data_direction direction);
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *ptr, size_t size,
+	       enum dma_data_direction dir)
+{
+	_dma_sync((dma_addr_t)ptr, size, dir);
+	return (dma_addr_t) ptr;
+}
 
 static inline dma_addr_t
 dma_map_page(struct device *dev, struct page *page,
@@ -53,8 +96,12 @@ dma_map_page(struct device *dev, struct page *page,
  * After this call, reads by the cpu to the buffer are guarenteed to see
  * whatever the device wrote there.
  */
-extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
-			  enum dma_data_direction direction);
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		 enum dma_data_direction dir)
+{
+	BUG_ON(!valid_dma_direction(dir));
+}
 
 static inline void
 dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
@@ -80,38 +127,66 @@ dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
  * the same here.
  */
 extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-		      enum dma_data_direction direction);
+		      enum dma_data_direction dir);
 
 /*
  * Unmap a set of streaming mode DMA translations.
  * Again, cpu read rules concerning calls here are the same as for
  * pci_unmap_single() above.
  */
-extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-		      int nhwentries, enum dma_data_direction direction);
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+	     int nhwentries, enum dma_data_direction dir)
+{
+	BUG_ON(!valid_dma_direction(dir));
+}
+
+static inline void
+dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t handle,
+			      unsigned long offset, size_t size,
+			      enum dma_data_direction dir)
+{
+	BUG_ON(!valid_dma_direction(dir));
+}
+
+static inline void
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t handle,
+				 unsigned long offset, size_t size,
+				 enum dma_data_direction dir)
+{
+	_dma_sync(handle + offset, size, dir);
+}
 
-static inline void dma_sync_single_for_cpu(struct device *dev,
-					dma_addr_t handle, size_t size,
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size,
 			enum dma_data_direction dir)
 {
+	dma_sync_single_range_for_cpu(dev, handle, 0, size, dir);
 }
 
-static inline void dma_sync_single_for_device(struct device *dev,
-					dma_addr_t handle, size_t size,
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size,
 			   enum dma_data_direction dir)
 {
+	dma_sync_single_range_for_device(dev, handle, 0, size, dir);
 }
 
-static inline void dma_sync_sg_for_cpu(struct device *dev,
-					struct scatterlist *sg,
-					int nents, enum dma_data_direction dir)
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
+		    enum dma_data_direction dir)
 {
+	BUG_ON(!valid_dma_direction(dir));
 }
 
-static inline void dma_sync_sg_for_device(struct device *dev,
-					struct scatterlist *sg,
-					int nents, enum dma_data_direction dir)
+extern void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+		       int nents, enum dma_data_direction dir);
+
+static inline void
+dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+	       enum dma_data_direction dir)
 {
+	_dma_sync((dma_addr_t)vaddr, size, dir);
 }
 
 #endif				/* _BLACKFIN_DMA_MAPPING_H */

arch/blackfin/include/asm/dma.h

@@ -10,20 +10,44 @@
 
 #include <linux/interrupt.h>
 #include <mach/dma.h>
+#include <asm/atomic.h>
 #include <asm/blackfin.h>
 #include <asm/page.h>
-
-#define MAX_DMA_ADDRESS PAGE_OFFSET
-
-/*****************************************************************************
-*        Generic DMA  Declarations
-*
-****************************************************************************/
-enum dma_chan_status {
-	DMA_CHANNEL_FREE,
-	DMA_CHANNEL_REQUESTED,
-	DMA_CHANNEL_ENABLED,
-};
+#include <asm-generic/dma.h>
+
+/* DMA_CONFIG Masks */
+#define DMAEN			0x0001	/* DMA Channel Enable */
+#define WNR				0x0002	/* Channel Direction (W/R*) */
+#define WDSIZE_8		0x0000	/* Transfer Word Size = 8 */
+#define WDSIZE_16		0x0004	/* Transfer Word Size = 16 */
+#define WDSIZE_32		0x0008	/* Transfer Word Size = 32 */
+#define DMA2D			0x0010	/* DMA Mode (2D/1D*) */
+#define RESTART			0x0020	/* DMA Buffer Clear */
+#define DI_SEL			0x0040	/* Data Interrupt Timing Select */
+#define DI_EN			0x0080	/* Data Interrupt Enable */
+#define NDSIZE_0		0x0000	/* Next Descriptor Size = 0 (Stop/Autobuffer) */
+#define NDSIZE_1		0x0100	/* Next Descriptor Size = 1 */
+#define NDSIZE_2		0x0200	/* Next Descriptor Size = 2 */
+#define NDSIZE_3		0x0300	/* Next Descriptor Size = 3 */
+#define NDSIZE_4		0x0400	/* Next Descriptor Size = 4 */
+#define NDSIZE_5		0x0500	/* Next Descriptor Size = 5 */
+#define NDSIZE_6		0x0600	/* Next Descriptor Size = 6 */
+#define NDSIZE_7		0x0700	/* Next Descriptor Size = 7 */
+#define NDSIZE_8		0x0800	/* Next Descriptor Size = 8 */
+#define NDSIZE_9		0x0900	/* Next Descriptor Size = 9 */
+#define NDSIZE			0x0f00	/* Next Descriptor Size */
+#define DMAFLOW			0x7000	/* Flow Control */
+#define DMAFLOW_STOP	0x0000	/* Stop Mode */
+#define DMAFLOW_AUTO	0x1000	/* Autobuffer Mode */
+#define DMAFLOW_ARRAY	0x4000	/* Descriptor Array Mode */
+#define DMAFLOW_SMALL	0x6000	/* Small Model Descriptor List Mode */
+#define DMAFLOW_LARGE	0x7000	/* Large Model Descriptor List Mode */
+
+/* DMA_IRQ_STATUS Masks */
+#define DMA_DONE		0x0001	/* DMA Completion Interrupt Status */
+#define DMA_ERR			0x0002	/* DMA Error Interrupt Status */
+#define DFETCH			0x0004	/* DMA Descriptor Fetch Indicator */
+#define DMA_RUN			0x0008	/* DMA Channel Running Indicator */
 
 /*-------------------------
  * config reg bits value
@@ -104,11 +128,9 @@ struct dma_register {
 
 };
 
-struct mutex;
 struct dma_channel {
-	struct mutex dmalock;
 	const char *device_id;
-	enum dma_chan_status chan_status;
+	atomic_t chan_status;
 	volatile struct dma_register *regs;
 	struct dmasg *sg;		/* large mode descriptor */
 	unsigned int irq;
@@ -220,27 +242,20 @@ static inline void set_dma_sg(unsigned int channel, struct dmasg *sg, int ndsize
 
 static inline int dma_channel_active(unsigned int channel)
 {
-	if (dma_ch[channel].chan_status == DMA_CHANNEL_FREE)
-		return 0;
-	else
-		return 1;
+	return atomic_read(&dma_ch[channel].chan_status);
 }
 
 static inline void disable_dma(unsigned int channel)
 {
 	dma_ch[channel].regs->cfg &= ~DMAEN;
 	SSYNC();
-	dma_ch[channel].chan_status = DMA_CHANNEL_REQUESTED;
 }
 static inline void enable_dma(unsigned int channel)
 {
 	dma_ch[channel].regs->curr_x_count = 0;
 	dma_ch[channel].regs->curr_y_count = 0;
 	dma_ch[channel].regs->cfg |= DMAEN;
-	dma_ch[channel].chan_status = DMA_CHANNEL_ENABLED;
 }
-void free_dma(unsigned int channel);
-int request_dma(unsigned int channel, const char *device_id);
 int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data);
 
 static inline void dma_disable_irq(unsigned int channel)

arch/blackfin/include/asm/gpio.h

@@ -159,6 +159,11 @@ struct gpio_port_t {
 };
 #endif
 
+#ifdef BFIN_SPECIAL_GPIO_BANKS
+void bfin_special_gpio_free(unsigned gpio);
+int bfin_special_gpio_request(unsigned gpio, const char *label);
+#endif
+
 #ifdef CONFIG_PM
 
 unsigned int bfin_pm_standby_setup(void);

arch/blackfin/include/asm/gptimers.h

@@ -172,25 +172,25 @@
 
 /* The actual gptimer API */
 
-void     set_gptimer_pwidth(int timer_id, uint32_t width);
-uint32_t get_gptimer_pwidth(int timer_id);
-void     set_gptimer_period(int timer_id, uint32_t period);
-uint32_t get_gptimer_period(int timer_id);
-uint32_t get_gptimer_count(int timer_id);
-int      get_gptimer_intr(int timer_id);
-void     clear_gptimer_intr(int timer_id);
-int      get_gptimer_over(int timer_id);
-void     clear_gptimer_over(int timer_id);
-void     set_gptimer_config(int timer_id, uint16_t config);
-uint16_t get_gptimer_config(int timer_id);
-int      get_gptimer_run(int timer_id);
-void     set_gptimer_pulse_hi(int timer_id);
-void     clear_gptimer_pulse_hi(int timer_id);
+void     set_gptimer_pwidth(unsigned int timer_id, uint32_t width);
+uint32_t get_gptimer_pwidth(unsigned int timer_id);
+void     set_gptimer_period(unsigned int timer_id, uint32_t period);
+uint32_t get_gptimer_period(unsigned int timer_id);
+uint32_t get_gptimer_count(unsigned int timer_id);
+int      get_gptimer_intr(unsigned int timer_id);
+void     clear_gptimer_intr(unsigned int timer_id);
+int      get_gptimer_over(unsigned int timer_id);
+void     clear_gptimer_over(unsigned int timer_id);
+void     set_gptimer_config(unsigned int timer_id, uint16_t config);
+uint16_t get_gptimer_config(unsigned int timer_id);
+int      get_gptimer_run(unsigned int timer_id);
+void     set_gptimer_pulse_hi(unsigned int timer_id);
+void     clear_gptimer_pulse_hi(unsigned int timer_id);
 void     enable_gptimers(uint16_t mask);
 void     disable_gptimers(uint16_t mask);
 void     disable_gptimers_sync(uint16_t mask);
 uint16_t get_enabled_gptimers(void);
-uint32_t get_gptimer_status(int group);
-void     set_gptimer_status(int group, uint32_t value);
+uint32_t get_gptimer_status(unsigned int group);
+void     set_gptimer_status(unsigned int group, uint32_t value);
 
 #endif

arch/blackfin/include/asm/ipipe.h

@@ -35,9 +35,9 @@
 #include <asm/atomic.h>
 #include <asm/traps.h>
 
-#define IPIPE_ARCH_STRING     "1.11-00"
+#define IPIPE_ARCH_STRING     "1.12-00"
 #define IPIPE_MAJOR_NUMBER    1
-#define IPIPE_MINOR_NUMBER    11
+#define IPIPE_MINOR_NUMBER    12
 #define IPIPE_PATCH_NUMBER    0
 
 #ifdef CONFIG_SMP
@@ -124,16 +124,6 @@ static inline int __ipipe_check_tickdev(const char *devname)
 	return 1;
 }
 
-static inline void __ipipe_lock_root(void)
-{
-	set_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
-}
-
-static inline void __ipipe_unlock_root(void)
-{
-	clear_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
-}
-
 void __ipipe_enable_pipeline(void);
 
 #define __ipipe_hook_critical_ipi(ipd) do { } while (0)

arch/blackfin/include/asm/ipipe_base.h

@@ -51,23 +51,15 @@
 
 extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */
 
-#define __ipipe_stall_root()						\
-	do {								\
-		volatile unsigned long *p = &__ipipe_root_status;	\
-		set_bit(0, p);						\
-	} while (0)
-
-#define __ipipe_test_and_stall_root()					\
-	({								\
-		volatile unsigned long *p = &__ipipe_root_status;	\
-		test_and_set_bit(0, p);					\
-	})
-
-#define __ipipe_test_root()					\
-	({							\
-		const unsigned long *p = &__ipipe_root_status;	\
-		test_bit(0, p);					\
-	})
+void __ipipe_stall_root(void);
+
+unsigned long __ipipe_test_and_stall_root(void);
+
+unsigned long __ipipe_test_root(void);
+
+void __ipipe_lock_root(void);
+
+void __ipipe_unlock_root(void);
 
 #endif /* !__ASSEMBLY__ */
 

arch/blackfin/include/asm/kgdb.h

@@ -10,9 +10,6 @@
 
 #include <linux/ptrace.h>
 
-/* gdb locks */
-#define KGDB_MAX_NO_CPUS 8
-
 /*
  * BUFMAX defines the maximum number of characters in inbound/outbound buffers.
  * At least NUMREGBYTES*2 are needed for register packets.