Skip to content

L
linux-davinci
Commit 5171b100 authored by Hirokazu Takata's avatar Hirokazu Takata
Browse files
Options

m32r: Simplify ei_handler code 

Simplify and clean up messy ei_handler code in arch/m32r/kernel/entry.S.
- Remove ifdef's for CONFIG_CHIP_* configulations.
- Rearrange the M32700 workaround code.
- Remove the messy platform-dependent interrupt check routines and
  consolidate them to common INT0/INT1/INT2 check routines for all
  platforms with cascaded interrupt controllers.
Signed-off-by: default avatarHitoshi Yamamoto <hitoshiy@linux-m32r.org>
Signed-off-by: default avatarHirokazu Takata <takata@linux-m32r.org>
parent e070fb74
Show whitespace changes
Inline Side-by-side
Showing with 39 additions and 202 deletions
arch/m32r/kernel/entry.S
View file @ 5171b100
...@@ -290,16 +290,12 @@ syscall_badsys: ...@@ -290,16 +290,12 @@ syscall_badsys:
*/ */
ENTRY(ei_handler) ENTRY(ei_handler)
#if defined(CONFIG_CHIP_M32700) #if defined(CONFIG_CHIP_M32700)
SWITCH_TO_KERNEL_STACK
; WORKAROUND: force to clear SM bit and use the kernel stack (SPI). ; WORKAROUND: force to clear SM bit and use the kernel stack (SPI).
SWITCH_TO_KERNEL_STACK
#endif #endif
SAVE_ALL SAVE_ALL
mv r1, sp ; arg1(regs) mv r1, sp ; arg1(regs)
#if defined(CONFIG_CHIP_VDEC2) || defined(CONFIG_CHIP_XNUX2) \ ; GET_ICU_STATUS;
|| defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_M32102) \
|| defined(CONFIG_CHIP_OPSP) || defined(CONFIG_CHIP_M32104)
; GET_ICU_STATUS;
seth r0, #shigh(M32R_ICU_ISTS_ADDR) seth r0, #shigh(M32R_ICU_ISTS_ADDR)
ld r0, @(low(M32R_ICU_ISTS_ADDR),r0) ld r0, @(low(M32R_ICU_ISTS_ADDR),r0)
push r0 push r0
...@@ -314,10 +310,15 @@ ENTRY(ei_handler) ...@@ -314,10 +310,15 @@ ENTRY(ei_handler)
;; IRQ exist check ;; IRQ exist check
#if defined(CONFIG_CHIP_M32700) #if defined(CONFIG_CHIP_M32700)
/* WORKAROUND: IMASK bug M32700-TS1, TS2 chip. */ /* WORKAROUND: IMASK bug M32700-TS1, TS2 chip. */
beqz r0, 3f ; if (!irq_num) goto exit bnez r0, 0f
#else ld24 r14, #0x00070000
seth r0, #shigh(M32R_ICU_IMASK_ADDR)
st r14, @(low(M32R_ICU_IMASK_ADDR),r0)
bra 1f
.fillinsn
0:
#endif /* CONFIG_CHIP_M32700 */
beqz r0, 1f ; if (!irq_num) goto exit beqz r0, 1f ; if (!irq_num) goto exit
#endif /* WORKAROUND */
;; IPI check ;; IPI check
cmpi r0, #(M32R_IRQ_IPI0<<2) ; ISN < IPI0 check cmpi r0, #(M32R_IRQ_IPI0<<2) ; ISN < IPI0 check
bc 2f bc 2f
...@@ -333,218 +334,54 @@ ENTRY(ei_handler) ...@@ -333,218 +334,54 @@ ENTRY(ei_handler)
1: 1:
addi sp, #4 addi sp, #4
bra ret_to_intr bra ret_to_intr
#if defined(CONFIG_CHIP_M32700)
/* WORKAROUND: IMASK bug M32700-TS1, TS2 chip. */
.fillinsn
3:
ld24 r14, #0x00070000
seth r0, #shigh(M32R_ICU_IMASK_ADDR)
st r14, @(low(M32R_ICU_IMASK_ADDR), r0)
addi sp, #4
bra ret_to_intr
#endif /* WORKAROUND */
;; do_IRQ
.fillinsn .fillinsn
2: 2:
srli r0, #2 srli r0, #2
#if defined(CONFIG_PLAT_USRV)
add3 r2, r0, #-(M32R_IRQ_INT1) ; INT1# interrupt
bnez r2, 9f
; read ICU status register of PLD
seth r0, #high(PLD_ICUISTS)
or3 r0, r0, #low(PLD_ICUISTS)
lduh r0, @r0
slli r0, #21
srli r0, #27 ; ISN
addi r0, #(M32700UT_PLD_IRQ_BASE)
.fillinsn
9:
#elif defined(CONFIG_PLAT_M32700UT)
add3 r2, r0, #-(M32R_IRQ_INT1) ; INT1# interrupt
bnez r2, check_int0
; read ICU status register of PLD
seth r0, #high(PLD_ICUISTS)
or3 r0, r0, #low(PLD_ICUISTS)
lduh r0, @r0
slli r0, #21
srli r0, #27 ; ISN
addi r0, #(M32700UT_PLD_IRQ_BASE)
bra check_end
.fillinsn
check_int0:
add3 r2, r0, #-(M32R_IRQ_INT0) ; INT0# interrupt
bnez r2, check_int2
; read ICU status of LAN-board
seth r0, #high(M32700UT_LAN_ICUISTS)
or3 r0, r0, #low(M32700UT_LAN_ICUISTS)
lduh r0, @r0
slli r0, #21
srli r0, #27 ; ISN
add3 r0, r0, #(M32700UT_LAN_PLD_IRQ_BASE)
bra check_end
.fillinsn
check_int2:
add3 r2, r0, #-(M32R_IRQ_INT2) ; INT2# interrupt
bnez r2, check_end
; read ICU status of LCD-board
seth r0, #high(M32700UT_LCD_ICUISTS)
or3 r0, r0, #low(M32700UT_LCD_ICUISTS)
lduh r0, @r0
slli r0, #21
srli r0, #27 ; ISN
add3 r0, r0, #(M32700UT_LCD_PLD_IRQ_BASE)
bra check_end
.fillinsn
check_end:
#elif defined(CONFIG_PLAT_OPSPUT)
add3 r2, r0, #-(M32R_IRQ_INT1) ; INT1# interrupt
bnez r2, check_int0
; read ICU status register of PLD
seth r0, #high(PLD_ICUISTS)
or3 r0, r0, #low(PLD_ICUISTS)
lduh r0, @r0
slli r0, #21
srli r0, #27 ; ISN
addi r0, #(OPSPUT_PLD_IRQ_BASE)
bra check_end
.fillinsn
check_int0:
add3 r2, r0, #-(M32R_IRQ_INT0) ; INT0# interrupt
bnez r2, check_int2
; read ICU status of LAN-board
seth r0, #high(OPSPUT_LAN_ICUISTS)
or3 r0, r0, #low(OPSPUT_LAN_ICUISTS)
lduh r0, @r0
slli r0, #21
srli r0, #27 ; ISN
add3 r0, r0, #(OPSPUT_LAN_PLD_IRQ_BASE)
bra check_end
.fillinsn
check_int2:
add3 r2, r0, #-(M32R_IRQ_INT2) ; INT2# interrupt
bnez r2, check_end
; read ICU status of LCD-board
seth r0, #high(OPSPUT_LCD_ICUISTS)
or3 r0, r0, #low(OPSPUT_LCD_ICUISTS)
lduh r0, @r0
slli r0, #21
srli r0, #27 ; ISN
add3 r0, r0, #(OPSPUT_LCD_PLD_IRQ_BASE)
bra check_end
.fillinsn
check_end:
#endif /* CONFIG_PLAT_OPSPUT */
bl do_IRQ ; r0(irq), r1(regs)
#else /* not CONFIG_SMP */ #else /* not CONFIG_SMP */
srli r0, #22 ; r0(irq) srli r0, #22 ; r0(irq)
#if defined(CONFIG_PLAT_USRV) #endif /* not CONFIG_SMP */
add3 r2, r0, #-(M32R_IRQ_INT1) ; INT1# interrupt
bnez r2, 1f #if defined(CONFIG_PLAT_HAS_INT1ICU)
; read ICU status register of PLD
seth r0, #high(PLD_ICUISTS)
or3 r0, r0, #low(PLD_ICUISTS)
lduh r0, @r0
slli r0, #21
srli r0, #27 ; ISN
addi r0, #(M32700UT_PLD_IRQ_BASE)
.fillinsn
1:
#elif defined(CONFIG_PLAT_M32700UT)
add3 r2, r0, #-(M32R_IRQ_INT1) ; INT1# interrupt
bnez r2, check_int0
; read ICU status register of PLD
seth r0, #high(PLD_ICUISTS)
or3 r0, r0, #low(PLD_ICUISTS)
lduh r0, @r0
slli r0, #21
srli r0, #27 ; ISN
addi r0, #(M32700UT_PLD_IRQ_BASE)
bra check_end
.fillinsn
check_int0:
add3 r2, r0, #-(M32R_IRQ_INT0) ; INT0# interrupt
bnez r2, check_int2
; read ICU status of LAN-board
seth r0, #high(M32700UT_LAN_ICUISTS)
or3 r0, r0, #low(M32700UT_LAN_ICUISTS)
lduh r0, @r0
slli r0, #21
srli r0, #27 ; ISN
add3 r0, r0, #(M32700UT_LAN_PLD_IRQ_BASE)
bra check_end
.fillinsn
check_int2:
add3 r2, r0, #-(M32R_IRQ_INT2) ; INT2# interrupt
bnez r2, check_end
; read ICU status of LCD-board
seth r0, #high(M32700UT_LCD_ICUISTS)
or3 r0, r0, #low(M32700UT_LCD_ICUISTS)
lduh r0, @r0
slli r0, #21
srli r0, #27 ; ISN
add3 r0, r0, #(M32700UT_LCD_PLD_IRQ_BASE)
bra check_end
.fillinsn
check_end:
#elif defined(CONFIG_PLAT_OPSPUT)
add3 r2, r0, #-(M32R_IRQ_INT1) ; INT1# interrupt add3 r2, r0, #-(M32R_IRQ_INT1) ; INT1# interrupt
bnez r2, check_int0 bnez r2, 3f
; read ICU status register of PLD seth r0, #shigh(M32R_INT1ICU_ISTS)
seth r0, #high(PLD_ICUISTS) lduh r0, @(low(M32R_INT1ICU_ISTS),r0) ; bit10-6 : ISN
or3 r0, r0, #low(PLD_ICUISTS)
lduh r0, @r0
slli r0, #21 slli r0, #21
srli r0, #27 ; ISN srli r0, #27 ; ISN
addi r0, #(OPSPUT_PLD_IRQ_BASE) addi r0, #(M32R_INT1ICU_IRQ_BASE)
bra check_end bra check_end
.fillinsn .fillinsn
check_int0: 3:
#endif /* CONFIG_PLAT_HAS_INT1ICU */
#if defined(CONFIG_PLAT_HAS_INT0ICU)
add3 r2, r0, #-(M32R_IRQ_INT0) ; INT0# interrupt add3 r2, r0, #-(M32R_IRQ_INT0) ; INT0# interrupt
bnez r2, check_int2 bnez r2, 4f
; read ICU status of LAN-board seth r0, #shigh(M32R_INT0ICU_ISTS)
seth r0, #high(OPSPUT_LAN_ICUISTS) lduh r0, @(low(M32R_INT0ICU_ISTS),r0) ; bit10-6 : ISN
or3 r0, r0, #low(OPSPUT_LAN_ICUISTS)
lduh r0, @r0
slli r0, #21 slli r0, #21
srli r0, #27 ; ISN srli r0, #27 ; ISN
add3 r0, r0, #(OPSPUT_LAN_PLD_IRQ_BASE) addi r0, #(M32R_INT0ICU_IRQ_BASE)
bra check_end bra check_end
.fillinsn .fillinsn
check_int2: 4:
#endif /* CONFIG_PLAT_HAS_INT0ICU */
#if defined(CONFIG_PLAT_HAS_INT2ICU)
add3 r2, r0, #-(M32R_IRQ_INT2) ; INT2# interrupt add3 r2, r0, #-(M32R_IRQ_INT2) ; INT2# interrupt
bnez r2, check_end bnez r2, 5f
; read ICU status of LCD-board seth r0, #shigh(M32R_INT2ICU_ISTS)
seth r0, #high(OPSPUT_LCD_ICUISTS) lduh r0, @(low(M32R_INT2ICU_ISTS),r0) ; bit10-6 : ISN
or3 r0, r0, #low(OPSPUT_LCD_ICUISTS)
lduh r0, @r0
slli r0, #21
srli r0, #27 ; ISN
add3 r0, r0, #(OPSPUT_LCD_PLD_IRQ_BASE)
bra check_end
.fillinsn
check_end:
#elif defined(CONFIG_PLAT_M32104UT)
add3 r2, r0, #-(M32R_IRQ_INT1) ; INT1# interrupt
bnez r2, check_end
; read ICU status register of PLD
seth r0, #high(PLD_ICUISTS)
or3 r0, r0, #low(PLD_ICUISTS)
lduh r0, @r0
slli r0, #21 slli r0, #21
srli r0, #27 ; ISN srli r0, #27 ; ISN
addi r0, #(M32104UT_PLD_IRQ_BASE) addi r0, #(M32R_INT2ICU_IRQ_BASE)
bra check_end ; bra check_end
.fillinsn .fillinsn
5:
#endif /* CONFIG_PLAT_HAS_INT2ICU */
check_end: check_end:
#endif /* CONFIG_PLAT_M32104UT */
bl do_IRQ bl do_IRQ
#endif /* CONFIG_SMP */
pop r14 pop r14
seth r0, #shigh(M32R_ICU_IMASK_ADDR) seth r0, #shigh(M32R_ICU_IMASK_ADDR)
st r14, @(low(M32R_ICU_IMASK_ADDR),r0) st r14, @(low(M32R_ICU_IMASK_ADDR),r0)
#else
#error no chip configuration
#endif
ret_to_intr: ret_to_intr:
bra ret_from_intr bra ret_from_intr
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment