Merge branch 'iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (61 commits)
  amd-iommu: remove unnecessary "AMD IOMMU: " prefix
  amd-iommu: detach device explicitly before attaching it to a new domain
  amd-iommu: remove BUS_NOTIFY_BOUND_DRIVER handling
  dma-debug: simplify logic in driver_filter()
  dma-debug: disable/enable irqs only once in device_dma_allocations
  dma-debug: use pr_* instead of printk(KERN_* ...)
  dma-debug: code style fixes
  dma-debug: comment style fixes
  dma-debug: change hash_bucket_find from first-fit to best-fit
  x86: enable GART-IOMMU only after setting up protection methods
  amd_iommu: fix lock imbalance
  dma-debug: add documentation for the driver filter
  dma-debug: add dma_debug_driver kernel command line
  dma-debug: add debugfs file for driver filter
  dma-debug: add variables and checks for driver filter
  dma-debug: fix debug_dma_sync_sg_for_cpu and debug_dma_sync_sg_for_device
  dma-debug: use sg_dma_len accessor
  dma-debug: use sg_dma_address accessor instead of using dma_address directly
  amd-iommu: don't free dma adresses below 512MB with CONFIG_IOMMU_STRESS
  amd-iommu: don't preallocate page tables with CONFIG_IOMMU_STRESS
  ...

Documentation/DMA-API.txt

@@ -704,12 +704,24 @@ this directory the following files can currently be found:
 				The current number of free dma_debug_entries
 				in the allocator.
 
+	dma-api/driver-filter
+				You can write a name of a driver into this file
+				to limit the debug output to requests from that
+				particular driver. Write an empty string to
+				that file to disable the filter and see
+				all errors again.
+
 If you have this code compiled into your kernel it will be enabled by default.
 If you want to boot without the bookkeeping anyway you can provide
 'dma_debug=off' as a boot parameter. This will disable DMA-API debugging.
 Notice that you can not enable it again at runtime. You have to reboot to do
 so.
 
+If you want to see debug messages only for a special device driver you can
+specify the dma_debug_driver=<drivername> parameter. This will enable the
+driver filter at boot time. The debug code will only print errors for that
+driver afterwards. This filter can be disabled or changed later using debugfs.
+
 When the code disables itself at runtime this is most likely because it ran
 out of dma_debug_entries. These entries are preallocated at boot. The number
 of preallocated entries is defined per architecture. If it is too low for you

Documentation/kernel-parameters.txt

@@ -329,11 +329,6 @@ and is between 256 and 4096 characters. It is defined in the file
 				    flushed before they will be reused, which
 				    is a lot of faster
 
-	amd_iommu_size= [HW,X86-64]
-			Define the size of the aperture for the AMD IOMMU
-			driver. Possible values are:
-			'32M', '64M' (default), '128M', '256M', '512M', '1G'
-
 	amijoy.map=	[HW,JOY] Amiga joystick support
 			Map of devices attached to JOY0DAT and JOY1DAT
 			Format: <a>,<b>
@@ -646,6 +641,13 @@ and is between 256 and 4096 characters. It is defined in the file
 			DMA-API debugging code disables itself because the
 			architectural default is too low.
 
+	dma_debug_driver=<driver_name>
+			With this option the DMA-API debugging driver
+			filter feature can be enabled at boot time. Just
+			pass the driver to filter for as the parameter.
+			The filter can be disabled or changed to another
+			driver later using sysfs.
+
 	dscc4.setup=	[NET]
 
 	dtc3181e=	[HW,SCSI]

arch/x86/Kconfig.debug

@@ -159,10 +159,17 @@ config IOMMU_DEBUG
 	  options. See Documentation/x86_64/boot-options.txt for more
 	  details.
 
+config IOMMU_STRESS
+	bool "Enable IOMMU stress-test mode"
+	---help---
+	  This option disables various optimizations in IOMMU related
+	  code to do real stress testing of the IOMMU code. This option
+	  will cause a performance drop and should only be enabled for
+	  testing.
+
 config IOMMU_LEAK
 	bool "IOMMU leak tracing"
-	depends on DEBUG_KERNEL
-	depends on IOMMU_DEBUG
+	depends on IOMMU_DEBUG && DMA_API_DEBUG
 	---help---
 	  Add a simple leak tracer to the IOMMU code. This is useful when you
 	  are debugging a buggy device driver that leaks IOMMU mappings.

arch/x86/include/asm/amd_iommu.h

@@ -27,6 +27,8 @@ extern int amd_iommu_init(void);
 extern int amd_iommu_init_dma_ops(void);
 extern void amd_iommu_detect(void);
 extern irqreturn_t amd_iommu_int_handler(int irq, void *data);
+extern void amd_iommu_flush_all_domains(void);
+extern void amd_iommu_flush_all_devices(void);
 #else
 static inline int amd_iommu_init(void) { return -ENODEV; }
 static inline void amd_iommu_detect(void) { }

arch/x86/include/asm/amd_iommu_types.h

@@ -194,6 +194,27 @@
 #define PD_DMA_OPS_MASK		(1UL << 0) /* domain used for dma_ops */
 #define PD_DEFAULT_MASK		(1UL << 1) /* domain is a default dma_ops
 					      domain for an IOMMU */
+extern bool amd_iommu_dump;
+#define DUMP_printk(format, arg...)					\
+	do {								\
+		if (amd_iommu_dump)						\
+			printk(KERN_INFO "AMD IOMMU: " format, ## arg);	\
+	} while(0);
+
+/*
+ * Make iterating over all IOMMUs easier
+ */
+#define for_each_iommu(iommu) \
+	list_for_each_entry((iommu), &amd_iommu_list, list)
+#define for_each_iommu_safe(iommu, next) \
+	list_for_each_entry_safe((iommu), (next), &amd_iommu_list, list)
+
+#define APERTURE_RANGE_SHIFT	27	/* 128 MB */
+#define APERTURE_RANGE_SIZE	(1ULL << APERTURE_RANGE_SHIFT)
+#define APERTURE_RANGE_PAGES	(APERTURE_RANGE_SIZE >> PAGE_SHIFT)
+#define APERTURE_MAX_RANGES	32	/* allows 4GB of DMA address space */
+#define APERTURE_RANGE_INDEX(a)	((a) >> APERTURE_RANGE_SHIFT)
+#define APERTURE_PAGE_INDEX(a)	(((a) >> 21) & 0x3fULL)
 
 /*
  * This structure contains generic data for  IOMMU protection domains
@@ -209,6 +230,26 @@ struct protection_domain {
 	void *priv;		/* private data */
 };
 
+/*
+ * For dynamic growth the aperture size is split into ranges of 128MB of
+ * DMA address space each. This struct represents one such range.
+ */
+struct aperture_range {
+
+	/* address allocation bitmap */
+	unsigned long *bitmap;
+
+	/*
+	 * Array of PTE pages for the aperture. In this array we save all the
+	 * leaf pages of the domain page table used for the aperture. This way
+	 * we don't need to walk the page table to find a specific PTE. We can
+	 * just calculate its address in constant time.
+	 */
+	u64 *pte_pages[64];
+
+	unsigned long offset;
+};
+
 /*
  * Data container for a dma_ops specific protection domain
  */
@@ -222,18 +263,10 @@ struct dma_ops_domain {
 	unsigned long aperture_size;
 
 	/* address we start to search for free addresses */
-	unsigned long next_bit;
-
-	/* address allocation bitmap */
-	unsigned long *bitmap;
+	unsigned long next_address;
 
-	/*
-	 * Array of PTE pages for the aperture. In this array we save all the
-	 * leaf pages of the domain page table used for the aperture. This way
-	 * we don't need to walk the page table to find a specific PTE. We can
-	 * just calculate its address in constant time.
-	 */
-	u64 **pte_pages;
+	/* address space relevant data */
+	struct aperture_range *aperture[APERTURE_MAX_RANGES];
 
 	/* This will be set to true when TLB needs to be flushed */
 	bool need_flush;

arch/x86/kernel/pci-calgary_64.c

@@ -186,37 +186,6 @@ static struct cal_chipset_ops calioc2_chip_ops = {
 
 static struct calgary_bus_info bus_info[MAX_PHB_BUS_NUM] = { { NULL, 0, 0 }, };
 
-/* enable this to stress test the chip's TCE cache */
-#ifdef CONFIG_IOMMU_DEBUG
-static int debugging = 1;
-
-static inline unsigned long verify_bit_range(unsigned long* bitmap,
-	int expected, unsigned long start, unsigned long end)
-{
-	unsigned long idx = start;
-
-	BUG_ON(start >= end);
-
-	while (idx < end) {
-		if (!!test_bit(idx, bitmap) != expected)
-			return idx;
-		++idx;
-	}
-
-	/* all bits have the expected value */
-	return ~0UL;
-}
-#else /* debugging is disabled */
-static int debugging;
-
-static inline unsigned long verify_bit_range(unsigned long* bitmap,
-	int expected, unsigned long start, unsigned long end)
-{
-	return ~0UL;
-}
-
-#endif /* CONFIG_IOMMU_DEBUG */
-
 static inline int translation_enabled(struct iommu_table *tbl)
 {
 	/* only PHBs with translation enabled have an IOMMU table */
@@ -228,7 +197,6 @@ static void iommu_range_reserve(struct iommu_table *tbl,
 {
 	unsigned long index;
 	unsigned long end;
-	unsigned long badbit;
 	unsigned long flags;
 
 	index = start_addr >> PAGE_SHIFT;
@@ -243,14 +211,6 @@ static void iommu_range_reserve(struct iommu_table *tbl,
 
 	spin_lock_irqsave(&tbl->it_lock, flags);
 
-	badbit = verify_bit_range(tbl->it_map, 0, index, end);
-	if (badbit != ~0UL) {
-		if (printk_ratelimit())
-			printk(KERN_ERR "Calgary: entry already allocated at "
-			       "0x%lx tbl %p dma 0x%lx npages %u\n",
-			       badbit, tbl, start_addr, npages);
-	}
-
 	iommu_area_reserve(tbl->it_map, index, npages);
 
 	spin_unlock_irqrestore(&tbl->it_lock, flags);
@@ -326,7 +286,6 @@ static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
 	unsigned int npages)
 {
 	unsigned long entry;
-	unsigned long badbit;
 	unsigned long badend;
 	unsigned long flags;
 
@@ -346,14 +305,6 @@ static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
 
 	spin_lock_irqsave(&tbl->it_lock, flags);
 
-	badbit = verify_bit_range(tbl->it_map, 1, entry, entry + npages);
-	if (badbit != ~0UL) {
-		if (printk_ratelimit())
-			printk(KERN_ERR "Calgary: bit is off at 0x%lx "
-			       "tbl %p dma 0x%Lx entry 0x%lx npages %u\n",
-			       badbit, tbl, dma_addr, entry, npages);
-	}
-
 	iommu_area_free(tbl->it_map, entry, npages);
 
 	spin_unlock_irqrestore(&tbl->it_lock, flags);
@@ -1488,9 +1439,8 @@ void __init detect_calgary(void)
 		iommu_detected = 1;
 		calgary_detected = 1;
 		printk(KERN_INFO "PCI-DMA: Calgary IOMMU detected.\n");
-		printk(KERN_INFO "PCI-DMA: Calgary TCE table spec is %d, "
-		       "CONFIG_IOMMU_DEBUG is %s.\n", specified_table_size,
-		       debugging ? "enabled" : "disabled");
+		printk(KERN_INFO "PCI-DMA: Calgary TCE table spec is %d\n",
+		       specified_table_size);
 
 		/* swiotlb for devices that aren't behind the Calgary. */
 		if (max_pfn > MAX_DMA32_PFN)

arch/x86/kernel/pci-gart_64.c

@@ -144,48 +144,21 @@ static void flush_gart(void)
 }
 
 #ifdef CONFIG_IOMMU_LEAK
-
-#define SET_LEAK(x)							\
-	do {								\
-		if (iommu_leak_tab)					\
-			iommu_leak_tab[x] = __builtin_return_address(0);\
-	} while (0)
-
-#define CLEAR_LEAK(x)							\
-	do {								\
-		if (iommu_leak_tab)					\
-			iommu_leak_tab[x] = NULL;			\
-	} while (0)
-
 /* Debugging aid for drivers that don't free their IOMMU tables */
-static void **iommu_leak_tab;
 static int leak_trace;
 static int iommu_leak_pages = 20;
 
 static void dump_leak(void)
 {
-	int i;
 	static int dump;
 
-	if (dump || !iommu_leak_tab)
+	if (dump)
 		return;
 	dump = 1;
-	show_stack(NULL, NULL);
 
-	/* Very crude. dump some from the end of the table too */
-	printk(KERN_DEBUG "Dumping %d pages from end of IOMMU:\n",
-	       iommu_leak_pages);
-	for (i = 0; i < iommu_leak_pages; i += 2) {
-		printk(KERN_DEBUG "%lu: ", iommu_pages-i);
-		printk_address((unsigned long) iommu_leak_tab[iommu_pages-i],
-				0);
-		printk(KERN_CONT "%c", (i+1)%2 == 0 ? '\n' : ' ');
-	}
-	printk(KERN_DEBUG "\n");
+	show_stack(NULL, NULL);
+	debug_dma_dump_mappings(NULL);
 }
-#else
-# define SET_LEAK(x)
-# define CLEAR_LEAK(x)
 #endif
 
 static void iommu_full(struct device *dev, size_t size, int dir)
@@ -248,7 +221,6 @@ static dma_addr_t dma_map_area(struct device *dev, dma_addr_t phys_mem,
 
 	for (i = 0; i < npages; i++) {
 		iommu_gatt_base[iommu_page + i] = GPTE_ENCODE(phys_mem);
-		SET_LEAK(iommu_page + i);
 		phys_mem += PAGE_SIZE;
 	}
 	return iommu_bus_base + iommu_page*PAGE_SIZE + (phys_mem & ~PAGE_MASK);
@@ -294,7 +266,6 @@ static void gart_unmap_page(struct device *dev, dma_addr_t dma_addr,
 	npages = iommu_num_pages(dma_addr, size, PAGE_SIZE);
 	for (i = 0; i < npages; i++) {
 		iommu_gatt_base[iommu_page + i] = gart_unmapped_entry;
-		CLEAR_LEAK(iommu_page + i);
 	}
 	free_iommu(iommu_page, npages);
 }
@@ -377,7 +348,6 @@ static int __dma_map_cont(struct device *dev, struct scatterlist *start,
 		pages = iommu_num_pages(s->offset, s->length, PAGE_SIZE);
 		while (pages--) {
 			iommu_gatt_base[iommu_page] = GPTE_ENCODE(addr);
-			SET_LEAK(iommu_page);
 			addr += PAGE_SIZE;
 			iommu_page++;
 		}
@@ -688,8 +658,6 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 
 	agp_gatt_table = gatt;
 
-	enable_gart_translations();
-
 	error = sysdev_class_register(&gart_sysdev_class);
 	if (!error)
 		error = sysdev_register(&device_gart);
@@ -801,11 +769,12 @@ void __init gart_iommu_init(void)
 
 #ifdef CONFIG_IOMMU_LEAK
 	if (leak_trace) {
-		iommu_leak_tab = (void *)__get_free_pages(GFP_KERNEL|__GFP_ZERO,
-				  get_order(iommu_pages*sizeof(void *)));
-		if (!iommu_leak_tab)
+		int ret;
+
+		ret = dma_debug_resize_entries(iommu_pages);
+		if (ret)
 			printk(KERN_DEBUG
-			       "PCI-DMA: Cannot allocate leak trace area\n");
+			       "PCI-DMA: Cannot trace all the entries\n");
 	}
 #endif
 
@@ -846,6 +815,14 @@ void __init gart_iommu_init(void)
 	 */
 	wbinvd();
 	
+	/*
+	 * Now all caches are flushed and we can safely enable
+	 * GART hardware.  Doing it early leaves the possibility
+	 * of stale cache entries that can lead to GART PTE
+	 * errors.
+	 */
+	enable_gart_translations();
+
 	/*
 	 * Try to workaround a bug (thanks to BenH):
 	 * Set unmapped entries to a scratch page instead of 0.

arch/x86/kernel/pci-swiotlb.c

@@ -28,7 +28,7 @@ dma_addr_t swiotlb_phys_to_bus(struct device *hwdev, phys_addr_t paddr)
 	return paddr;
 }
 
-phys_addr_t swiotlb_bus_to_phys(dma_addr_t baddr)
+phys_addr_t swiotlb_bus_to_phys(struct device *hwdev, dma_addr_t baddr)
 {
 	return baddr;
 }

include/linux/dma-debug.h

@@ -32,6 +32,8 @@ extern void dma_debug_add_bus(struct bus_type *bus);
 
 extern void dma_debug_init(u32 num_entries);
 
+extern int dma_debug_resize_entries(u32 num_entries);
+
 extern void debug_dma_map_page(struct device *dev, struct page *page,
 			       size_t offset, size_t size,
 			       int direction, dma_addr_t dma_addr,
@@ -91,6 +93,11 @@ static inline void dma_debug_init(u32 num_entries)
 {
 }
 
+static inline int dma_debug_resize_entries(u32 num_entries)
+{
+	return 0;
+}
+
 static inline void debug_dma_map_page(struct device *dev, struct page *page,
 				      size_t offset, size_t size,
 				      int direction, dma_addr_t dma_addr,

include/linux/swiotlb.h

@@ -29,7 +29,8 @@ extern void *swiotlb_alloc(unsigned order, unsigned long nslabs);
 
 extern dma_addr_t swiotlb_phys_to_bus(struct device *hwdev,
 				      phys_addr_t address);
-extern phys_addr_t swiotlb_bus_to_phys(dma_addr_t address);
+extern phys_addr_t swiotlb_bus_to_phys(struct device *hwdev,
+				       dma_addr_t address);
 
 extern int swiotlb_arch_range_needs_mapping(phys_addr_t paddr, size_t size);
 

lib/swiotlb.c

@@ -60,8 +60,8 @@ enum dma_sync_target {
 int swiotlb_force;
 
 /*
- * Used to do a quick range check in swiotlb_unmap_single and
- * swiotlb_sync_single_*, to see if the memory was in fact allocated by this
+ * Used to do a quick range check in unmap_single and
+ * sync_single_*, to see if the memory was in fact allocated by this
  * API.
  */
 static char *io_tlb_start, *io_tlb_end;
@@ -129,7 +129,7 @@ dma_addr_t __weak swiotlb_phys_to_bus(struct device *hwdev, phys_addr_t paddr)
 	return paddr;
 }
 
-phys_addr_t __weak swiotlb_bus_to_phys(dma_addr_t baddr)
+phys_addr_t __weak swiotlb_bus_to_phys(struct device *hwdev, dma_addr_t baddr)
 {
 	return baddr;
 }
@@ -140,9 +140,15 @@ static dma_addr_t swiotlb_virt_to_bus(struct device *hwdev,
 	return swiotlb_phys_to_bus(hwdev, virt_to_phys(address));
 }
 
-static void *swiotlb_bus_to_virt(dma_addr_t address)
+void * __weak swiotlb_bus_to_virt(struct device *hwdev, dma_addr_t address)
 {
-	return phys_to_virt(swiotlb_bus_to_phys(address));
+	return phys_to_virt(swiotlb_bus_to_phys(hwdev, address));
+}
+
+int __weak swiotlb_arch_address_needs_mapping(struct device *hwdev,
+					       dma_addr_t addr, size_t size)
+{
+	return !is_buffer_dma_capable(dma_get_mask(hwdev), addr, size);
 }
 
 int __weak swiotlb_arch_range_needs_mapping(phys_addr_t paddr, size_t size)
@@ -309,10 +315,10 @@ cleanup1:
 	return -ENOMEM;
 }
 
-static int
+static inline int
 address_needs_mapping(struct device *hwdev, dma_addr_t addr, size_t size)
 {
-	return !is_buffer_dma_capable(dma_get_mask(hwdev), addr, size);
+	return swiotlb_arch_address_needs_mapping(hwdev, addr, size);
 }
 
 static inline int range_needs_mapping(phys_addr_t paddr, size_t size)
@@ -341,7 +347,7 @@ static void swiotlb_bounce(phys_addr_t phys, char *dma_addr, size_t size,
 		unsigned long flags;
 
 		while (size) {
-			sz = min(PAGE_SIZE - offset, size);
+			sz = min_t(size_t, PAGE_SIZE - offset, size);
 
 			local_irq_save(flags);
 			buffer = kmap_atomic(pfn_to_page(pfn),
@@ -476,7 +482,7 @@ found:
  * dma_addr is the kernel virtual address of the bounce buffer to unmap.
  */
 static void
-unmap_single(struct device *hwdev, char *dma_addr, size_t size, int dir)
+do_unmap_single(struct device *hwdev, char *dma_addr, size_t size, int dir)
 {
 	unsigned long flags;
 	int i, count, nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
@@ -560,7 +566,6 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 				   size)) {
 		/*
 		 * The allocated memory isn't reachable by the device.
-		 * Fall back on swiotlb_map_single().
 		 */
 		free_pages((unsigned long) ret, order);
 		ret = NULL;
@@ -568,9 +573,8 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 	if (!ret) {
 		/*
 		 * We are either out of memory or the device can't DMA
-		 * to GFP_DMA memory; fall back on
-		 * swiotlb_map_single(), which will grab memory from
-		 * the lowest available address range.
+		 * to GFP_DMA memory; fall back on map_single(), which
+		 * will grab memory from the lowest available address range.
 		 */
 		ret = map_single(hwdev, 0, size, DMA_FROM_DEVICE);
 		if (!ret)
@@ -587,7 +591,7 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 		       (unsigned long long)dev_addr);
 
 		/* DMA_TO_DEVICE to avoid memcpy in unmap_single */
-		unmap_single(hwdev, ret, size, DMA_TO_DEVICE);
+		do_unmap_single(hwdev, ret, size, DMA_TO_DEVICE);
 		return NULL;
 	}
 	*dma_handle = dev_addr;
@@ -604,7 +608,7 @@ swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr,
 		free_pages((unsigned long) vaddr, get_order(size));
 	else
 		/* DMA_TO_DEVICE to avoid memcpy in unmap_single */
-		unmap_single(hwdev, vaddr, size, DMA_TO_DEVICE);
+		do_unmap_single(hwdev, vaddr, size, DMA_TO_DEVICE);
 }
 EXPORT_SYMBOL(swiotlb_free_coherent);
 
@@ -634,7 +638,7 @@ swiotlb_full(struct device *dev, size_t size, int dir, int do_panic)
  * physical address to use is returned.
  *
  * Once the device is given the dma address, the device owns this memory until
- * either swiotlb_unmap_single or swiotlb_dma_sync_single is performed.
+ * either swiotlb_unmap_page or swiotlb_dma_sync_single is performed.
  */
 dma_addr_t swiotlb_map_page(struct device *dev, struct page *page,
 			    unsigned long offset, size_t size,
@@ -642,18 +646,17 @@ dma_addr_t swiotlb_map_page(struct device *dev, struct page *page,
 			    struct dma_attrs *attrs)
 {
 	phys_addr_t phys = page_to_phys(page) + offset;
-	void *ptr = page_address(page) + offset;
 	dma_addr_t dev_addr = swiotlb_phys_to_bus(dev, phys);
 	void *map;
 
 	BUG_ON(dir == DMA_NONE);
 	/*
-	 * If the pointer passed in happens to be in the device's DMA window,
+	 * If the address happens to be in the device's DMA window,
 	 * we can safely return the device addr and not worry about bounce
 	 * buffering it.
 	 */
 	if (!address_needs_mapping(dev, dev_addr, size) &&
-	    !range_needs_mapping(virt_to_phys(ptr), size))
+	    !range_needs_mapping(phys, size))
 		return dev_addr;
 
 	/*
@@ -679,31 +682,43 @@ EXPORT_SYMBOL_GPL(swiotlb_map_page);
 
 /*
  * Unmap a single streaming mode DMA translation.  The dma_addr and size must
- * match what was provided for in a previous swiotlb_map_single call.  All
+ * match what was provided for in a previous swiotlb_map_page call.  All
  * other usages are undefined.
  *
  * After this call, reads by the cpu to the buffer are guaranteed to see
  * whatever the device wrote there.
  */
-void swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
-			size_t size, enum dma_data_direction dir,
-			struct dma_attrs *attrs)
+static void unmap_single(struct device *hwdev, dma_addr_t dev_addr,
+			 size_t size, int dir)
 {
-	char *dma_addr = swiotlb_bus_to_virt(dev_addr);
+	char *dma_addr = swiotlb_bus_to_virt(hwdev, dev_addr);
 
 	BUG_ON(dir == DMA_NONE);
-	if (is_swiotlb_buffer(dma_addr))
-		unmap_single(hwdev, dma_addr, size, dir);
-	else if (dir == DMA_FROM_DEVICE)
+
+	if (is_swiotlb_buffer(dma_addr)) {
+		do_unmap_single(hwdev, dma_addr, size, dir);
+		return;
+	}
+
+	if (dir != DMA_FROM_DEVICE)
+		return;
+
 	dma_mark_clean(dma_addr, size);
 }
+
+void swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
+			size_t size, enum dma_data_direction dir,
+			struct dma_attrs *attrs)
+{
+	unmap_single(hwdev, dev_addr, size, dir);
+}
 EXPORT_SYMBOL_GPL(swiotlb_unmap_page);
 
 /*
  * Make physical memory consistent for a single streaming mode DMA translation
  * after a transfer.
  *
- * If you perform a swiotlb_map_single() but wish to interrogate the buffer
+ * If you perform a swiotlb_map_page() but wish to interrogate the buffer
  * using the cpu, yet do not wish to teardown the dma mapping, you must
  * call this function before doing so.  At the next point you give the dma
  * address back to the card, you must first perform a
@@ -713,12 +728,18 @@ static void
 swiotlb_sync_single(struct device *hwdev, dma_addr_t dev_addr,
 		    size_t size, int dir, int target)
 {
-	char *dma_addr = swiotlb_bus_to_virt(dev_addr);
+	char *dma_addr = swiotlb_bus_to_virt(hwdev, dev_addr);
 
 	BUG_ON(dir == DMA_NONE);
-	if (is_swiotlb_buffer(dma_addr))
+
+	if (is_swiotlb_buffer(dma_addr)) {
 		sync_single(hwdev, dma_addr, size, dir, target);
-	else if (dir == DMA_FROM_DEVICE)
+		return;
+	}
+
+	if (dir != DMA_FROM_DEVICE)
+		return;
+
 	dma_mark_clean(dma_addr, size);
 }
 
@@ -746,13 +767,7 @@ swiotlb_sync_single_range(struct device *hwdev, dma_addr_t dev_addr,
 			  unsigned long offset, size_t size,
 			  int dir, int target)
 {
-	char *dma_addr = swiotlb_bus_to_virt(dev_addr) + offset;
-
-	BUG_ON(dir == DMA_NONE);
-	if (is_swiotlb_buffer(dma_addr))
-		sync_single(hwdev, dma_addr, size, dir, target);
-	else if (dir == DMA_FROM_DEVICE)
-		dma_mark_clean(dma_addr, size);
+	swiotlb_sync_single(hwdev, dev_addr + offset, size, dir, target);
 }
 
 void
@@ -777,7 +792,7 @@ EXPORT_SYMBOL_GPL(swiotlb_sync_single_range_for_device);
 
 /*
  * Map a set of buffers described by scatterlist in streaming mode for DMA.
- * This is the scatter-gather version of the above swiotlb_map_single
+ * This is the scatter-gather version of the above swiotlb_map_page
  * interface.  Here the scatter gather list elements are each tagged with the
  * appropriate dma address and length.  They are obtained via
  * sg_dma_{address,length}(SG).
@@ -788,7 +803,7 @@ EXPORT_SYMBOL_GPL(swiotlb_sync_single_range_for_device);
  *       The routine returns the number of addr/length pairs actually
  *       used, at most nents.
  *
- * Device ownership issues as mentioned above for swiotlb_map_single are the
+ * Device ownership issues as mentioned above for swiotlb_map_page are the
  * same here.
  */
 int
@@ -836,7 +851,7 @@ EXPORT_SYMBOL(swiotlb_map_sg);
 
 /*
  * Unmap a set of streaming mode DMA translations.  Again, cpu read rules
- * concerning calls here are the same as for swiotlb_unmap_single() above.
+ * concerning calls here are the same as for swiotlb_unmap_page() above.
  */
 void
 swiotlb_unmap_sg_attrs(struct device *hwdev, struct scatterlist *sgl,
@@ -847,13 +862,9 @@ swiotlb_unmap_sg_attrs(struct device *hwdev, struct scatterlist *sgl,
 
 	BUG_ON(dir == DMA_NONE);
 
-	for_each_sg(sgl, sg, nelems, i) {
-		if (sg->dma_address != swiotlb_phys_to_bus(hwdev, sg_phys(sg)))
-			unmap_single(hwdev, swiotlb_bus_to_virt(sg->dma_address),
-				     sg->dma_length, dir);
-		else if (dir == DMA_FROM_DEVICE)
-			dma_mark_clean(swiotlb_bus_to_virt(sg->dma_address), sg->dma_length);
-	}
+	for_each_sg(sgl, sg, nelems, i)
+		unmap_single(hwdev, sg->dma_address, sg->dma_length, dir);
+
 }
 EXPORT_SYMBOL(swiotlb_unmap_sg_attrs);
 
@@ -879,15 +890,9 @@ swiotlb_sync_sg(struct device *hwdev, struct scatterlist *sgl,
 	struct scatterlist *sg;
 	int i;
 
-	BUG_ON(dir == DMA_NONE);
-
-	for_each_sg(sgl, sg, nelems, i) {
-		if (sg->dma_address != swiotlb_phys_to_bus(hwdev, sg_phys(sg)))
-			sync_single(hwdev, swiotlb_bus_to_virt(sg->dma_address),
+	for_each_sg(sgl, sg, nelems, i)
+		swiotlb_sync_single(hwdev, sg->dma_address,
 				    sg->dma_length, dir, target);
-		else if (dir == DMA_FROM_DEVICE)
-			dma_mark_clean(swiotlb_bus_to_virt(sg->dma_address), sg->dma_length);
-	}
 }
 
 void