Commit 396dc44b authored by Pat Gefre's avatar Pat Gefre Committed by Linus Torvalds

[PATCH] ioc4 serial support - mostly cleanup

Various small mods for the Altix ioc4 serial driver - mostly cleanup:
- remove UIF_INITIALIZED usage
- use the 'lock' from uart_port
- better multiple card support
Signed-off-by: default avatarPatrick Gefre <pfg@sgi.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 5b116879
......@@ -308,6 +308,8 @@ struct ioc4_serial {
typedef void ioc4_intr_func_f(void *, uint32_t);
typedef ioc4_intr_func_f *ioc4_intr_func_t;
static unsigned int Num_of_ioc4_cards;
/* defining this will get you LOTS of great debug info */
//#define DEBUG_INTERRUPTS
#define DPRINT_CONFIG(_x...) ;
......@@ -317,7 +319,8 @@ typedef ioc4_intr_func_f *ioc4_intr_func_t;
#define WAKEUP_CHARS 256
/* number of characters we want to transmit to the lower level at a time */
#define IOC4_MAX_CHARS 128
#define IOC4_MAX_CHARS 256
#define IOC4_FIFO_CHARS 255
/* Device name we're using */
#define DEVICE_NAME "ttyIOC"
......@@ -1038,6 +1041,7 @@ static int inline ioc4_attach_local(struct ioc4_driver_data *idd)
return -ENOMEM;
}
memset(port, 0, sizeof(struct ioc4_port));
spin_lock_init(&port->ip_lock);
/* we need to remember the previous ones, to point back to
* them farther down - setting up the ring buffers.
......@@ -1691,12 +1695,14 @@ ioc4_change_speed(struct uart_port *the_port,
baud = 9600;
if (!the_port->fifosize)
the_port->fifosize = IOC4_MAX_CHARS;
the_port->fifosize = IOC4_FIFO_CHARS;
the_port->timeout = ((the_port->fifosize * HZ * bits) / (baud / 10));
the_port->timeout += HZ / 50; /* Add .02 seconds of slop */
the_port->ignore_status_mask = N_ALL_INPUT;
info->tty->low_latency = 1;
if (I_IGNPAR(info->tty))
the_port->ignore_status_mask &= ~(N_PARITY_ERROR
| N_FRAMING_ERROR);
......@@ -1742,7 +1748,6 @@ ioc4_change_speed(struct uart_port *the_port,
*/
static inline int ic4_startup_local(struct uart_port *the_port)
{
int retval = 0;
struct ioc4_port *port;
struct uart_info *info;
......@@ -1754,9 +1759,6 @@ static inline int ic4_startup_local(struct uart_port *the_port)
return -1;
info = the_port->info;
if (info->flags & UIF_INITIALIZED) {
return retval;
}
if (info->tty) {
set_bit(TTY_IO_ERROR, &info->tty->flags);
......@@ -1775,7 +1777,6 @@ static inline int ic4_startup_local(struct uart_port *the_port)
/* set the speed of the serial port */
ioc4_change_speed(the_port, info->tty->termios, (struct termios *)0);
info->flags |= UIF_INITIALIZED;
return 0;
}
......@@ -1785,9 +1786,13 @@ static inline int ic4_startup_local(struct uart_port *the_port)
*/
static void ioc4_cb_output_lowat(struct ioc4_port *port)
{
unsigned long pflags;
/* ip_lock is set on the call here */
if (port->ip_port) {
spin_lock_irqsave(&port->ip_port->lock, pflags);
transmit_chars(port->ip_port);
spin_unlock_irqrestore(&port->ip_port->lock, pflags);
}
}
......@@ -2064,8 +2069,7 @@ static inline int do_read(struct uart_port *the_port, unsigned char *buf,
* available data as long as it returns some.
*/
/* Re-arm the timer */
writel(port->ip_rx_cons | IOC4_SRCIR_ARM,
&port->ip_serial_regs->srcir);
writel(port->ip_rx_cons | IOC4_SRCIR_ARM, &port->ip_serial_regs->srcir);
prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK;
cons_ptr = port->ip_rx_cons;
......@@ -2299,6 +2303,7 @@ static inline int do_read(struct uart_port *the_port, unsigned char *buf,
}
return total;
}
/**
* receive_chars - upper level read. Called with ip_lock.
* @the_port: port to read from
......@@ -2307,9 +2312,11 @@ static void receive_chars(struct uart_port *the_port)
{
struct tty_struct *tty;
unsigned char ch[IOC4_MAX_CHARS];
int read_count, request_count;
int read_count, request_count = IOC4_MAX_CHARS;
struct uart_icount *icount;
struct uart_info *info = the_port->info;
int flip = 0;
unsigned long pflags;
/* Make sure all the pointers are "good" ones */
if (!info)
......@@ -2317,16 +2324,17 @@ static void receive_chars(struct uart_port *the_port)
if (!info->tty)
return;
spin_lock_irqsave(&the_port->lock, pflags);
tty = info->tty;
request_count = TTY_FLIPBUF_SIZE - tty->flip.count - 1;
if (request_count > TTY_FLIPBUF_SIZE - tty->flip.count)
request_count = TTY_FLIPBUF_SIZE - tty->flip.count;
if (request_count > 0) {
if (request_count > IOC4_MAX_CHARS - 2)
request_count = IOC4_MAX_CHARS - 2;
icount = &the_port->icount;
read_count = do_read(the_port, ch, request_count);
if (read_count > 0) {
flip = 1;
memcpy(tty->flip.char_buf_ptr, ch, read_count);
memset(tty->flip.flag_buf_ptr, TTY_NORMAL, read_count);
tty->flip.char_buf_ptr += read_count;
......@@ -2335,6 +2343,10 @@ static void receive_chars(struct uart_port *the_port)
icount->rx += read_count;
}
}
spin_unlock_irqrestore(&the_port->lock, pflags);
if (flip)
tty_flip_buffer_push(tty);
}
......@@ -2393,18 +2405,14 @@ static void ic4_shutdown(struct uart_port *the_port)
info = the_port->info;
if (!(info->flags & UIF_INITIALIZED))
return;
wake_up_interruptible(&info->delta_msr_wait);
if (info->tty)
set_bit(TTY_IO_ERROR, &info->tty->flags);
spin_lock_irqsave(&port->ip_lock, port_flags);
spin_lock_irqsave(&the_port->lock, port_flags);
set_notification(port, N_ALL, 0);
info->flags &= ~UIF_INITIALIZED;
spin_unlock_irqrestore(&port->ip_lock, port_flags);
spin_unlock_irqrestore(&the_port->lock, port_flags);
}
/**
......@@ -2463,12 +2471,10 @@ static unsigned int ic4_get_mctrl(struct uart_port *the_port)
static void ic4_start_tx(struct uart_port *the_port)
{
struct ioc4_port *port = get_ioc4_port(the_port);
unsigned long flags;
if (port) {
spin_lock_irqsave(&port->ip_lock, flags);
transmit_chars(the_port);
spin_unlock_irqrestore(&port->ip_lock, flags);
set_notification(port, N_OUTPUT_LOWAT, 1);
enable_intrs(port, port->ip_hooks->intr_tx_mt);
}
}
......@@ -2510,9 +2516,9 @@ static int ic4_startup(struct uart_port *the_port)
}
/* Start up the serial port */
spin_lock_irqsave(&port->ip_lock, port_flags);
spin_lock_irqsave(&the_port->lock, port_flags);
retval = ic4_startup_local(the_port);
spin_unlock_irqrestore(&port->ip_lock, port_flags);
spin_unlock_irqrestore(&the_port->lock, port_flags);
return retval;
}
......@@ -2527,12 +2533,11 @@ static void
ic4_set_termios(struct uart_port *the_port,
struct termios *termios, struct termios *old_termios)
{
struct ioc4_port *port = get_ioc4_port(the_port);
unsigned long port_flags;
spin_lock_irqsave(&port->ip_lock, port_flags);
spin_lock_irqsave(&the_port->lock, port_flags);
ioc4_change_speed(the_port, termios, old_termios);
spin_unlock_irqrestore(&port->ip_lock, port_flags);
spin_unlock_irqrestore(&the_port->lock, port_flags);
}
/**
......@@ -2607,24 +2612,25 @@ ioc4_serial_core_attach(struct pci_dev *pdev)
__FUNCTION__, (void *)the_port,
(void *)port));
spin_lock_init(&the_port->lock);
/* membase, iobase and mapbase just need to be non-0 */
the_port->membase = (unsigned char __iomem *)1;
the_port->line = the_port->iobase = ii;
the_port->iobase = (pdev->bus->number << 16) | ii;
the_port->line = (Num_of_ioc4_cards << 2) | ii;
the_port->mapbase = 1;
the_port->type = PORT_16550A;
the_port->fifosize = IOC4_MAX_CHARS;
the_port->fifosize = IOC4_FIFO_CHARS;
the_port->ops = &ioc4_ops;
the_port->irq = control->ic_irq;
the_port->dev = &pdev->dev;
spin_lock_init(&the_port->lock);
if (uart_add_one_port(&ioc4_uart, the_port) < 0) {
printk(KERN_WARNING
"%s: unable to add port %d\n",
__FUNCTION__, the_port->line);
"%s: unable to add port %d bus %d\n",
__FUNCTION__, the_port->line, pdev->bus->number);
} else {
DPRINT_CONFIG(
("IOC4 serial driver port %d irq = %d\n",
the_port->line, the_port->irq));
("IOC4 serial port %d irq = %d, bus %d\n",
the_port->line, the_port->irq, pdev->bus->number));
}
/* all ports are rs232 for now */
ioc4_set_proto(port, PROTO_RS232);
......@@ -2734,6 +2740,8 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd)
if ((ret = ioc4_serial_core_attach(idd->idd_pdev)))
goto out4;
Num_of_ioc4_cards++;
return ret;
/* error exits that give back resources */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment