Skip to content

L
linux-davinci
Commit 355c471f authored by dmitry pervushin's avatar dmitry pervushin Committed by Ralf Baechle
Browse files
Options

[MIPS] Support for the R5500-based NEC EMMA2RH Mark-eins board 

Signed-off-by: default avatardmitry pervushin  <dpervushin@ru.mvista.com>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 4a0312fc
Show whitespace changes
Inline Side-by-side
Showing with 3118 additions and 0 deletions
arch/mips/Kconfig
View file @ 355c471f
...@@ -530,6 +530,20 @@ config QEMU ...@@ -530,6 +530,20 @@ config QEMU
simulate actual MIPS hardware platforms. More information on Qemu simulate actual MIPS hardware platforms. More information on Qemu
can be found at http://www.linux-mips.org/wiki/Qemu. can be found at http://www.linux-mips.org/wiki/Qemu.
config MARKEINS
bool "Support for NEC EMMA2RH Mark-eins"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
select SWAP_IO_SPACE
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_CPU_R5000
help
This enables support for the R5432-based NEC Mark-eins
boards with R5500 CPU.
config SGI_IP22 config SGI_IP22
bool "SGI IP22 (Indy/Indigo2)" bool "SGI IP22 (Indy/Indigo2)"
select ARC select ARC
...@@ -968,6 +982,11 @@ config SOC_PNX8550 ...@@ -968,6 +982,11 @@ config SOC_PNX8550
config SWAP_IO_SPACE config SWAP_IO_SPACE
bool bool
config EMMA2RH
bool
depends on MARKEINS
default y
# #
# Unfortunately not all GT64120 systems run the chip at the same clock. # Unfortunately not all GT64120 systems run the chip at the same clock.
# As the user for the clock rate and try to minimize the available options. # As the user for the clock rate and try to minimize the available options.
......
arch/mips/Makefile
View file @ 355c471f
...@@ -465,6 +465,15 @@ libs-$(CONFIG_PNX8550_JBS) += arch/mips/philips/pnx8550/jbs/ ...@@ -465,6 +465,15 @@ libs-$(CONFIG_PNX8550_JBS) += arch/mips/philips/pnx8550/jbs/
#cflags-$(CONFIG_PNX8550_JBS) += -Iinclude/asm-mips/mach-pnx8550 #cflags-$(CONFIG_PNX8550_JBS) += -Iinclude/asm-mips/mach-pnx8550
load-$(CONFIG_PNX8550_JBS) += 0xffffffff80060000 load-$(CONFIG_PNX8550_JBS) += 0xffffffff80060000
# NEC EMMA2RH boards
#
core-$(CONFIG_EMMA2RH) += arch/mips/emma2rh/common/
cflags-$(CONFIG_EMMA2RH) += -Iinclude/asm-mips/mach-emma2rh
# NEC EMMA2RH Mark-eins
core-$(CONFIG_MARKEINS) += arch/mips/emma2rh/markeins/
load-$(CONFIG_MARKEINS) += 0xffffffff88100000
# #
# SGI IP22 (Indy/Indigo2) # SGI IP22 (Indy/Indigo2)
# #
......
arch/mips/configs/emma2rh_defconfig 0 → 100644
View file @ 355c471f
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.17
# Sun Jun 18 13:46:53 2006
#
CONFIG_MIPS=y
#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_MIPS_BOSPORUS is not set
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
# CONFIG_MIPS_PB1550 is not set
# CONFIG_MIPS_PB1200 is not set
# CONFIG_MIPS_DB1000 is not set
# CONFIG_MIPS_DB1100 is not set
# CONFIG_MIPS_DB1500 is not set
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_3 is not set
# CONFIG_MOMENCO_OCELOT_C is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
CONFIG_MARKEINS=y
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SIBYTE_SWARM is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_RHONE is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_PTSWARM is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_EMMA2RH=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
# CONFIG_CPU_MIPS32_R1 is not set
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_TX49XX is not set
CONFIG_CPU_R5000=y
# CONFIG_CPU_R5432 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_R10000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_SYS_HAS_CPU_R5000=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
#
# Kernel type
#
CONFIG_32BIT=y
# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMTC is not set
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_VPE_LOADER is not set
# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_MMU=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_FWMARK is not set
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_QUEUE is not set
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0x1e000000
CONFIG_MTD_PHYSMAP_LEN=0x02000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_DM9000 is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
CONFIG_NATSEMI=y
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_LAN_SAA9730 is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT=""
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE="console=ttyS0,115200 mem=192m ip=bootp root=/dev/nfs rw"
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
arch/mips/emma2rh/common/Makefile 0 → 100644
View file @ 355c471f
#
# arch/mips/emma2rh/common/Makefile
# Makefile for the common code of NEC EMMA2RH based board.
#
# Copyright (C) NEC Electronics Corporation 2005-2006
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
obj-$(CONFIG_MARKEINS) += irq.o irq_emma2rh.o prom.o
arch/mips/emma2rh/common/irq.c 0 → 100644
View file @ 355c471f
/*
* arch/mips/emma2rh/common/irq.c
* This file is common irq dispatcher.
*
* Copyright (C) NEC Electronics Corporation 2005-2006
*
* This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c
*
* Copyright 2001 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/types.h>
#include <asm/i8259.h>
#include <asm/system.h>
#include <asm/mipsregs.h>
#include <asm/debug.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <asm/emma2rh/emma2rh.h>
/*
* the first level int-handler will jump here if it is a emma2rh irq
*/
asmlinkage void emma2rh_irq_dispatch(struct pt_regs *regs)
{
u32 intStatus;
u32 bitmask;
u32 i;
intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_0)
& emma2rh_in32(EMMA2RH_BHIF_INT_EN_0);
#ifdef EMMA2RH_SW_CASCADE
if (intStatus &
(1 << ((EMMA2RH_SW_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) {
u32 swIntStatus;
swIntStatus = emma2rh_in32(EMMA2RH_BHIF_SW_INT)
& emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) {
if (swIntStatus & bitmask) {
do_IRQ(EMMA2RH_SW_IRQ_BASE + i, regs);
return;
}
}
}
#endif
for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) {
if (intStatus & bitmask) {
do_IRQ(EMMA2RH_IRQ_BASE + i, regs);
return;
}
}
intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_1)
& emma2rh_in32(EMMA2RH_BHIF_INT_EN_1);
#ifdef EMMA2RH_GPIO_CASCADE
if (intStatus &
(1 << ((EMMA2RH_GPIO_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) {
u32 gpioIntStatus;
gpioIntStatus = emma2rh_in32(EMMA2RH_GPIO_INT_ST)
& emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) {
if (gpioIntStatus & bitmask) {
do_IRQ(EMMA2RH_GPIO_IRQ_BASE + i, regs);
return;
}
}
}
#endif
for (i = 32, bitmask = 1; i < 64; i++, bitmask <<= 1) {
if (intStatus & bitmask) {
do_IRQ(EMMA2RH_IRQ_BASE + i, regs);
return;
}
}
intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_2)
& emma2rh_in32(EMMA2RH_BHIF_INT_EN_2);
for (i = 64, bitmask = 1; i < 96; i++, bitmask <<= 1) {
if (intStatus & bitmask) {
do_IRQ(EMMA2RH_IRQ_BASE + i, regs);
return;
}
}
}
arch/mips/emma2rh/common/irq_emma2rh.c 0 → 100644
View file @ 355c471f
/*
* arch/mips/emma2rh/common/irq_emma2rh.c
* This file defines the irq handler for EMMA2RH.
*
* Copyright (C) NEC Electronics Corporation 2005-2006
*
* This file is based on the arch/mips/ddb5xxx/ddb5477/irq_5477.c
*
* Copyright 2001 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* EMMA2RH defines 64 IRQs.
*
* This file exports one function:
* emma2rh_irq_init(u32 irq_base);
*/
#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/ptrace.h>
#include <asm/debug.h>
#include <asm/emma2rh/emma2rh.h>
/* number of total irqs supported by EMMA2RH */
#define NUM_EMMA2RH_IRQ 96
static int emma2rh_irq_base = -1;
void ll_emma2rh_irq_enable(int);
void ll_emma2rh_irq_disable(int);
static void emma2rh_irq_enable(unsigned int irq)
{
ll_emma2rh_irq_enable(irq - emma2rh_irq_base);
}
static void emma2rh_irq_disable(unsigned int irq)
{
ll_emma2rh_irq_disable(irq - emma2rh_irq_base);
}
static unsigned int emma2rh_irq_startup(unsigned int irq)
{
emma2rh_irq_enable(irq);
return 0;
}
#define emma2rh_irq_shutdown emma2rh_irq_disable
static void emma2rh_irq_ack(unsigned int irq)
{
/* disable interrupt - some handler will re-enable the irq
* and if the interrupt is leveled, we will have infinite loop
*/
ll_emma2rh_irq_disable(irq - emma2rh_irq_base);
}
static void emma2rh_irq_end(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
ll_emma2rh_irq_enable(irq - emma2rh_irq_base);
}
hw_irq_controller emma2rh_irq_controller = {
.typename = "emma2rh_irq",
.startup = emma2rh_irq_startup,
.shutdown = emma2rh_irq_shutdown,
.enable = emma2rh_irq_enable,
.disable = emma2rh_irq_disable,
.ack = emma2rh_irq_ack,
.end = emma2rh_irq_end,
.set_affinity = NULL /* no affinity stuff for UP */
};
void emma2rh_irq_init(u32 irq_base)
{
u32 i;
for (i = irq_base; i < irq_base + NUM_EMMA2RH_IRQ; i++) {
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = NULL;
irq_desc[i].depth = 1;
irq_desc[i].handler = &emma2rh_irq_controller;
}
emma2rh_irq_base = irq_base;
}
void ll_emma2rh_irq_enable(int emma2rh_irq)
{
u32 reg_value;
u32 reg_bitmask;
u32 reg_index;
reg_index = EMMA2RH_BHIF_INT_EN_0
+ (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0)
* (emma2rh_irq / 32);
reg_value = emma2rh_in32(reg_index);
reg_bitmask = 0x1 << (emma2rh_irq % 32);
db_assert((reg_value & reg_bitmask) == 0);
emma2rh_out32(reg_index, reg_value | reg_bitmask);
}
void ll_emma2rh_irq_disable(int emma2rh_irq)
{
u32 reg_value;
u32 reg_bitmask;
u32 reg_index;
reg_index = EMMA2RH_BHIF_INT_EN_0
+ (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0)
* (emma2rh_irq / 32);
reg_value = emma2rh_in32(reg_index);
reg_bitmask = 0x1 << (emma2rh_irq % 32);
db_assert((reg_value & reg_bitmask) != 0);
emma2rh_out32(reg_index, reg_value & ~reg_bitmask);
}
arch/mips/emma2rh/common/prom.c 0 → 100644
View file @ 355c471f
/*
* arch/mips/emma2rh/common/prom.c
* This file is prom file.
*
* Copyright (C) NEC Electronics Corporation 2004-2006
*
* This file is based on the arch/mips/ddb5xxx/common/prom.c
*
* Copyright 2001 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/bootmem.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <asm/emma2rh/emma2rh.h>
#include <asm/debug.h>
const char *get_system_type(void)
{
switch (mips_machtype) {
case MACH_NEC_MARKEINS:
return "NEC EMMA2RH Mark-eins";
default:
return "Unknown NEC board";
}
}
/* [jsun@junsun.net] PMON passes arguments in C main() style */
void __init prom_init(void)
{
int argc = fw_arg0;
char **arg = (char **)fw_arg1;
int i;
/* if user passes kernel args, ignore the default one */
if (argc > 1)
arcs_cmdline[0] = '\0';
/* arg[0] is "g", the rest is boot parameters */
for (i = 1; i < argc; i++) {
if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
>= sizeof(arcs_cmdline))
break;
strcat(arcs_cmdline, arg[i]);
strcat(arcs_cmdline, " ");
}
mips_machgroup = MACH_GROUP_NEC_EMMA2RH;
#if defined(CONFIG_MARKEINS)
mips_machtype = MACH_NEC_MARKEINS;
add_memory_region(0, EMMA2RH_RAM_SIZE, BOOT_MEM_RAM);
#endif
}
void __init prom_free_prom_memory(void)
{
}
arch/mips/emma2rh/markeins/Makefile 0 → 100644
View file @ 355c471f
#
# arch/mips/emma2rh/markeins/Makefile
# Makefile for the common code of NEC EMMA2RH based board.
#
# Copyright (C) NEC Electronics Corporation 2005-2006
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
obj-$(CONFIG_MARKEINS) += irq.o irq_markeins.o setup.o led.o platform.o
arch/mips/emma2rh/markeins/irq.c 0 → 100644
View file @ 355c471f
/*
* arch/mips/emma2rh/markeins/irq.c
* This file defines the irq handler for EMMA2RH.
*
* Copyright (C) NEC Electronics Corporation 2004-2006
*
* This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c
*
* Copyright 2001 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/types.h>
#include <linux/ptrace.h>
#include <linux/delay.h>
#include <asm/i8259.h>
#include <asm/irq_cpu.h>
#include <asm/system.h>
#include <asm/mipsregs.h>
#include <asm/debug.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <asm/emma2rh/emma2rh.h>
/*
* IRQ mapping
*
* 0-7: 8 CPU interrupts
* 0 - software interrupt 0
* 1 - software interrupt 1
* 2 - most Vrc5477 interrupts are routed to this pin
* 3 - (optional) some other interrupts routed to this pin for debugg
* 4 - not used
* 5 - not used
* 6 - not used
* 7 - cpu timer (used by default)
*
*/
extern void emma2rh_sw_irq_init(u32 base);
extern void emma2rh_gpio_irq_init(u32 base);
extern void emma2rh_irq_init(u32 base);
extern asmlinkage void emma2rh_irq_dispatch(struct pt_regs *regs);
static struct irqaction irq_cascade = {
.handler = no_action,
.flags = 0,
.mask = CPU_MASK_NONE,
.name = "cascade",
.dev_id = NULL,
.next = NULL,
};
void __init arch_init_irq(void)
{
u32 reg;
db_run(printk("markeins_irq_setup invoked.\n"));
/* by default, interrupts are disabled. */
emma2rh_out32(EMMA2RH_BHIF_INT_EN_0, 0);
emma2rh_out32(EMMA2RH_BHIF_INT_EN_1, 0);
emma2rh_out32(EMMA2RH_BHIF_INT_EN_2, 0);
emma2rh_out32(EMMA2RH_BHIF_INT1_EN_0, 0);
emma2rh_out32(EMMA2RH_BHIF_INT1_EN_1, 0);
emma2rh_out32(EMMA2RH_BHIF_INT1_EN_2, 0);
emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, 0);
clear_c0_status(0xff00);
set_c0_status(0x0400);
#define GPIO_PCI (0xf<<15)
/* setup GPIO interrupt for PCI interface */
/* direction input */
reg = emma2rh_in32(EMMA2RH_GPIO_DIR);
emma2rh_out32(EMMA2RH_GPIO_DIR, reg & ~GPIO_PCI);
/* disable interrupt */
reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg & ~GPIO_PCI);
/* level triggerd */
reg = emma2rh_in32(EMMA2RH_GPIO_INT_MODE);
emma2rh_out32(EMMA2RH_GPIO_INT_MODE, reg | GPIO_PCI);
reg = emma2rh_in32(EMMA2RH_GPIO_INT_CND_A);
emma2rh_out32(EMMA2RH_GPIO_INT_CND_A, reg & (~GPIO_PCI));
/* interrupt clear */
emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~GPIO_PCI);
/* init all controllers */
emma2rh_irq_init(EMMA2RH_IRQ_BASE);
emma2rh_sw_irq_init(EMMA2RH_SW_IRQ_BASE);
emma2rh_gpio_irq_init(EMMA2RH_GPIO_IRQ_BASE);
mips_cpu_irq_init(CPU_IRQ_BASE);
/* setup cascade interrupts */
setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE, &irq_cascade);
setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE, &irq_cascade);
setup_irq(CPU_IRQ_BASE + CPU_EMMA2RH_CASCADE, &irq_cascade);
}
asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
{
unsigned int pending = read_c0_status() & read_c0_cause();
if (pending & STATUSF_IP7)
do_IRQ(CPU_IRQ_BASE + 7, regs);
else if (pending & STATUSF_IP2)
emma2rh_irq_dispatch(regs);
else if (pending & STATUSF_IP1)
do_IRQ(CPU_IRQ_BASE + 1, regs);
else if (pending & STATUSF_IP0)
do_IRQ(CPU_IRQ_BASE + 0, regs);
else
spurious_interrupt(regs);
}
arch/mips/emma2rh/markeins/irq_markeins.c 0 → 100644
View file @ 355c471f
/*
* arch/mips/emma2rh/markeins/irq_markeins.c
* This file defines the irq handler for Mark-eins.
*
* Copyright (C) NEC Electronics Corporation 2004-2006
*
* This file is based on the arch/mips/ddb5xxx/ddb5477/irq_5477.c
*
* Copyright 2001 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/types.h>
#include <linux/ptrace.h>
#include <asm/debug.h>
#include <asm/emma2rh/emma2rh.h>
static int emma2rh_sw_irq_base = -1;
static int emma2rh_gpio_irq_base = -1;
void ll_emma2rh_sw_irq_enable(int reg);
void ll_emma2rh_sw_irq_disable(int reg);
void ll_emma2rh_gpio_irq_enable(int reg);
void ll_emma2rh_gpio_irq_disable(int reg);
static void emma2rh_sw_irq_enable(unsigned int irq)
{
ll_emma2rh_sw_irq_enable(irq - emma2rh_sw_irq_base);
}
static void emma2rh_sw_irq_disable(unsigned int irq)
{
ll_emma2rh_sw_irq_disable(irq - emma2rh_sw_irq_base);
}
static unsigned int emma2rh_sw_irq_startup(unsigned int irq)
{
emma2rh_sw_irq_enable(irq);
return 0;
}
#define emma2rh_sw_irq_shutdown emma2rh_sw_irq_disable
static void emma2rh_sw_irq_ack(unsigned int irq)
{
ll_emma2rh_sw_irq_disable(irq - emma2rh_sw_irq_base);
}
static void emma2rh_sw_irq_end(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
ll_emma2rh_sw_irq_enable(irq - emma2rh_sw_irq_base);
}
hw_irq_controller emma2rh_sw_irq_controller = {
.typename = "emma2rh_sw_irq",
.startup = emma2rh_sw_irq_startup,
.shutdown = emma2rh_sw_irq_shutdown,
.enable = emma2rh_sw_irq_enable,
.disable = emma2rh_sw_irq_disable,
.ack = emma2rh_sw_irq_ack,
.end = emma2rh_sw_irq_end,
.set_affinity = NULL,
};
void emma2rh_sw_irq_init(u32 irq_base)
{
u32 i;
for (i = irq_base; i < irq_base + NUM_EMMA2RH_IRQ_SW; i++) {
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = NULL;
irq_desc[i].depth = 2;
irq_desc[i].handler = &emma2rh_sw_irq_controller;
}
emma2rh_sw_irq_base = irq_base;
}
void ll_emma2rh_sw_irq_enable(int irq)
{
u32 reg;
db_assert(irq >= 0);
db_assert(irq < NUM_EMMA2RH_IRQ_SW);
reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
reg |= 1 << irq;
emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg);
}
void ll_emma2rh_sw_irq_disable(int irq)
{
u32 reg;
db_assert(irq >= 0);
db_assert(irq < 32);
reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
reg &= ~(1 << irq);
emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg);
}
static void emma2rh_gpio_irq_enable(unsigned int irq)
{
ll_emma2rh_gpio_irq_enable(irq - emma2rh_gpio_irq_base);
}
static void emma2rh_gpio_irq_disable(unsigned int irq)
{
ll_emma2rh_gpio_irq_disable(irq - emma2rh_gpio_irq_base);
}
static unsigned int emma2rh_gpio_irq_startup(unsigned int irq)
{
emma2rh_gpio_irq_enable(irq);
return 0;
}
#define emma2rh_gpio_irq_shutdown emma2rh_gpio_irq_disable
static void emma2rh_gpio_irq_ack(unsigned int irq)
{
irq -= emma2rh_gpio_irq_base;
emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~(1 << irq));
ll_emma2rh_gpio_irq_disable(irq);
}
static void emma2rh_gpio_irq_end(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
ll_emma2rh_gpio_irq_enable(irq - emma2rh_gpio_irq_base);
}
hw_irq_controller emma2rh_gpio_irq_controller = {
.typename = "emma2rh_gpio_irq",
.startup = emma2rh_gpio_irq_startup,
.shutdown = emma2rh_gpio_irq_shutdown,
.enable = emma2rh_gpio_irq_enable,
.disable = emma2rh_gpio_irq_disable,
.ack = emma2rh_gpio_irq_ack,
.end = emma2rh_gpio_irq_end,
.set_affinity = NULL,
};
void emma2rh_gpio_irq_init(u32 irq_base)
{
u32 i;
for (i = irq_base; i < irq_base + NUM_EMMA2RH_IRQ_GPIO; i++) {
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = NULL;
irq_desc[i].depth = 2;
irq_desc[i].handler = &emma2rh_gpio_irq_controller;
}
emma2rh_gpio_irq_base = irq_base;
}
void ll_emma2rh_gpio_irq_enable(int irq)
{
u32 reg;
db_assert(irq >= 0);
db_assert(irq < NUM_EMMA2RH_IRQ_GPIO);
reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
reg |= 1 << irq;
emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
}
void ll_emma2rh_gpio_irq_disable(int irq)
{
u32 reg;
db_assert(irq >= 0);
db_assert(irq < NUM_EMMA2RH_IRQ_GPIO);
reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
reg &= ~(1 << irq);
emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
}
arch/mips/emma2rh/markeins/led.c 0 → 100644
View file @ 355c471f
/*
* arch/mips/emma2rh/markeins/led.c
* This file defines the led display for Mark-eins.
*
* Copyright (C) NEC Electronics Corporation 2004-2006
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/string.h>
#include <asm/emma2rh/emma2rh.h>
const unsigned long clear = 0x20202020;
#define LED_BASE 0xb1400038
void markeins_led_clear(void)
{
emma2rh_out32(LED_BASE, clear);
emma2rh_out32(LED_BASE + 4, clear);
}
void markeins_led(const char *str)
{
int i;
int len = strlen(str);
markeins_led_clear();
if (len > 8)
len = 8;
if (emma2rh_in32(0xb0000800) & (0x1 << 18))
for (i = 0; i < len; i++)
emma2rh_out8(LED_BASE + i, str[i]);
else
for (i = 0; i < len; i++)
emma2rh_out8(LED_BASE + (i & 4) + (3 - (i & 3)),
str[i]);
}
void markeins_led_hex(u32 val)
{
char str[10];
sprintf(str, "%08x", val);
markeins_led(str);
}
arch/mips/emma2rh/markeins/platform.c 0 → 100644
View file @ 355c471f
/*
* arch/mips/emma2rh/markeins/platofrm.c
* This file sets up platform devices for EMMA2RH Mark-eins.
*
* Copyright(C) MontaVista Software Inc, 2006
*
* Author: dmitry pervushin <dpervushin@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/ioport.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/addrspace.h>
#include <asm/time.h>
#include <asm/bcache.h>
#include <asm/irq.h>
#include <asm/reboot.h>
#include <asm/gdb-stub.h>
#include <asm/traps.h>
#include <asm/debug.h>
#include <asm/emma2rh/emma2rh.h>
#define I2C_EMMA2RH "emma2rh-iic" /* must be in sync with IIC driver */
static struct resource i2c_emma_resources_0[] = {
{ NULL, EMMA2RH_IRQ_PIIC0, EMMA2RH_IRQ_PIIC0, IORESOURCE_IRQ },
{ NULL, KSEG1ADDR(EMMA2RH_PIIC0_BASE), KSEG1ADDR(EMMA2RH_PIIC0_BASE + 0x1000), 0 },
};
struct resource i2c_emma_resources_1[] = {
{ NULL, EMMA2RH_IRQ_PIIC1, EMMA2RH_IRQ_PIIC1, IORESOURCE_IRQ },
{ NULL, KSEG1ADDR(EMMA2RH_PIIC1_BASE), KSEG1ADDR(EMMA2RH_PIIC1_BASE + 0x1000), 0 },
};
struct resource i2c_emma_resources_2[] = {
{ NULL, EMMA2RH_IRQ_PIIC2, EMMA2RH_IRQ_PIIC2, IORESOURCE_IRQ },
{ NULL, KSEG1ADDR(EMMA2RH_PIIC2_BASE), KSEG1ADDR(EMMA2RH_PIIC2_BASE + 0x1000), 0 },
};
struct platform_device i2c_emma_devices[] = {
[0] = {
.name = I2C_EMMA2RH,
.id = 0,
.resource = i2c_emma_resources_0,
.num_resources = ARRAY_SIZE(i2c_emma_resources_0),
},
[1] = {
.name = I2C_EMMA2RH,
.id = 1,
.resource = i2c_emma_resources_1,
.num_resources = ARRAY_SIZE(i2c_emma_resources_1),
},
[2] = {
.name = I2C_EMMA2RH,
.id = 2,
.resource = i2c_emma_resources_2,
.num_resources = ARRAY_SIZE(i2c_emma_resources_2),
},
};
#define EMMA2RH_SERIAL_CLOCK 18544000
#define EMMA2RH_SERIAL_FLAGS UPF_BOOT_AUTOCONF | UPF_SKIP_TEST
static struct plat_serial8250_port platform_serial_ports[] = {
[0] = {
.membase = (void __iomem*)KSEG1ADDR(EMMA2RH_PFUR0_BASE + 3),
.irq = EMMA2RH_IRQ_PFUR0,
.uartclk = EMMA2RH_SERIAL_CLOCK,
.regshift = 4,
.iotype = UPIO_MEM,
.flags = EMMA2RH_SERIAL_FLAGS,
},
[1] = {
.membase = (void __iomem*)KSEG1ADDR(EMMA2RH_PFUR1_BASE + 3),
.irq = EMMA2RH_IRQ_PFUR1,
.uartclk = EMMA2RH_SERIAL_CLOCK,
.regshift = 4,
.iotype = UPIO_MEM,
.flags = EMMA2RH_SERIAL_FLAGS,
},
[2] = {
.membase = (void __iomem*)KSEG1ADDR(EMMA2RH_PFUR2_BASE + 3),
.irq = EMMA2RH_IRQ_PFUR2,
.uartclk = EMMA2RH_SERIAL_CLOCK,
.regshift = 4,
.iotype = UPIO_MEM,
.flags = EMMA2RH_SERIAL_FLAGS,
},
[3] = {
.flags = 0,
},
};
static struct platform_device serial_emma = {
.name = "serial8250",
.dev = {
.platform_data = &platform_serial_ports,
},
};
static struct platform_device *devices[] = {
&i2c_emma_devices[0],
&i2c_emma_devices[1],
&i2c_emma_devices[2],
&serial_emma,
};
static struct mtd_partition markeins_parts[] = {
[0] = {
.name = "RootFS",
.offset = 0x00000000,
.size = 0x00c00000,
},
[1] = {
.name = "boot code area",
.offset = MTDPART_OFS_APPEND,
.size = 0x00100000,
},
[2] = {
.name = "kernel image",
.offset = MTDPART_OFS_APPEND,
.size = 0x00300000,
},
[3] = {
.name = "RootFS2",
.offset = MTDPART_OFS_APPEND,
.size = 0x00c00000,
},
[4] = {
.name = "boot code area2",
.offset = MTDPART_OFS_APPEND,
.size = 0x00100000,
},
[5] = {
.name = "kernel image2",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
};
static int __init platform_devices_setup(void)
{
physmap_set_partitions(markeins_parts, ARRAY_SIZE(markeins_parts));
return platform_add_devices(devices, ARRAY_SIZE(devices));
}
arch_initcall(platform_devices_setup);
arch/mips/emma2rh/markeins/setup.c 0 → 100644
View file @ 355c471f
/*
* arch/mips/emma2rh/markeins/setup.c
* This file is setup for EMMA2RH Mark-eins.
*
* Copyright (C) NEC Electronics Corporation 2004-2006
*
* This file is based on the arch/mips/ddb5xxx/ddb5477/setup.c.
*
* Copyright 2001 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/initrd.h>
#include <linux/irq.h>
#include <linux/ide.h>
#include <linux/ioport.h>
#include <linux/param.h> /* for HZ */
#include <linux/root_dev.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/addrspace.h>
#include <asm/time.h>
#include <asm/bcache.h>
#include <asm/irq.h>
#include <asm/reboot.h>
#include <asm/gdb-stub.h>
#include <asm/traps.h>
#include <asm/debug.h>
#include <asm/emma2rh/emma2rh.h>
#define USE_CPU_COUNTER_TIMER /* whether we use cpu counter */
extern void markeins_led(const char *);
static int bus_frequency = 0;
static void markeins_machine_restart(char *command)
{
static void (*back_to_prom) (void) = (void (*)(void))0xbfc00000;
printk("cannot EMMA2RH Mark-eins restart.\n");
markeins_led("restart.");
back_to_prom();
}
static void markeins_machine_halt(void)
{
printk("EMMA2RH Mark-eins halted.\n");
markeins_led("halted.");
while (1) ;
}
static void markeins_machine_power_off(void)
{
printk("EMMA2RH Mark-eins halted. Please turn off the power.\n");
markeins_led("poweroff.");
while (1) ;
}
static unsigned long clock[4] = { 166500000, 187312500, 199800000, 210600000 };
static unsigned int __init detect_bus_frequency(unsigned long rtc_base)
{
u32 reg;
/* detect from boot strap */
reg = emma2rh_in32(EMMA2RH_BHIF_STRAP_0);
reg = (reg >> 4) & 0x3;
return clock[reg];
}
static void __init emma2rh_time_init(void)
{
u32 reg;
if (bus_frequency == 0)
bus_frequency = detect_bus_frequency(0);
reg = emma2rh_in32(EMMA2RH_BHIF_STRAP_0);
if ((reg & 0x3) == 0)
reg = (reg >> 6) & 0x3;
else {
reg = emma2rh_in32(EMMA2RH_BHIF_MAIN_CTRL);
reg = (reg >> 4) & 0x3;
}
mips_hpt_frequency = (bus_frequency * (4 + reg)) / 4 / 2;
}
static void __init emma2rh_timer_setup(struct irqaction *irq)
{
/* we are using the cpu counter for timer interrupts */
setup_irq(CPU_IRQ_BASE + 7, irq);
}
static void markeins_board_init(void);
extern void markeins_irq_setup(void);
static void inline __init markeins_sio_setup(void)
{
#ifdef CONFIG_KGDB_8250
struct uart_port emma_port;
memset(&emma_port, 0, sizeof(emma_port));
emma_port.flags =
UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
emma_port.iotype = UPIO_MEM;
emma_port.regshift = 4; /* I/O addresses are every 8 bytes */
emma_port.uartclk = 18544000; /* Clock rate of the chip */
emma_port.line = 0;
emma_port.mapbase = KSEG1ADDR(EMMA2RH_PFUR0_BASE + 3);
emma_port.membase = (u8*)emma_port.mapbase;
early_serial_setup(&emma_port);
emma_port.line = 1;
emma_port.mapbase = KSEG1ADDR(EMMA2RH_PFUR1_BASE + 3);
emma_port.membase = (u8*)emma_port.mapbase;
early_serial_setup(&emma_port);
emma_port.irq = EMMA2RH_IRQ_PFUR1;
kgdb8250_add_port(1, &emma_port);
#endif
}
void __init plat_mem_setup(void)
{
/* initialize board - we don't trust the loader */
markeins_board_init();
set_io_port_base(KSEG1ADDR(EMMA2RH_PCI_IO_BASE));
board_time_init = emma2rh_time_init;
board_timer_setup = emma2rh_timer_setup;
_machine_restart = markeins_machine_restart;
_machine_halt = markeins_machine_halt;
pm_power_off = markeins_machine_power_off;
/* setup resource limits */
ioport_resource.start = EMMA2RH_PCI_IO_BASE;
ioport_resource.end = EMMA2RH_PCI_IO_BASE + EMMA2RH_PCI_IO_SIZE - 1;
iomem_resource.start = EMMA2RH_IO_BASE;
iomem_resource.end = EMMA2RH_ROM_BASE - 1;
/* Reboot on panic */
panic_timeout = 180;
markeins_sio_setup();
}
static void __init markeins_board_init(void)
{
u32 val;
val = emma2rh_in32(EMMA2RH_PBRD_INT_EN); /* open serial interrupts. */
emma2rh_out32(EMMA2RH_PBRD_INT_EN, val | 0xaa);
val = emma2rh_in32(EMMA2RH_PBRD_CLKSEL); /* set serial clocks. */
emma2rh_out32(EMMA2RH_PBRD_CLKSEL, val | 0x5); /* 18MHz */
emma2rh_out32(EMMA2RH_PCI_CONTROL, 0);
markeins_led("MVL E2RH");
}
arch/mips/pci/Makefile
View file @ 355c471f
...@@ -18,6 +18,7 @@ obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o ...@@ -18,6 +18,7 @@ obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o
obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.o obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.o
obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o
obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
# #
# These are still pretty much in the old state, watch, go blind. # These are still pretty much in the old state, watch, go blind.
......
arch/mips/pci/fixup-emma2rh.c 0 → 100644
View file @ 355c471f
/*
* arch/mips/pci/fixup-emma2rh.c
* This file defines the PCI configration.
*
* Copyright (C) NEC Electronics Corporation 2004-2006
*
* This file is based on the arch/mips/ddb5xxx/ddb5477/pci.c
*
* Copyright 2001 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <asm/bootinfo.h>
#include <asm/debug.h>
#include <asm/emma2rh/emma2rh.h>
#define EMMA2RH_PCI_HOST_SLOT 0x09
#define EMMA2RH_USB_SLOT 0x03
#define PCI_DEVICE_ID_NEC_EMMA2RH 0x014b /* EMMA2RH PCI Host */
/*
* we fix up irqs based on the slot number.
* The first entry is at AD:11.
* Fortunately this works because, although we have two pci buses,
* they all have different slot numbers (except for rockhopper slot 20
* which is handled below).
*
*/
#define MAX_SLOT_NUM 10
static unsigned char irq_map[][5] __initdata = {
[3] = {0, MARKEINS_PCI_IRQ_INTB, MARKEINS_PCI_IRQ_INTC,
MARKEINS_PCI_IRQ_INTD, 0,},
[4] = {0, MARKEINS_PCI_IRQ_INTA, 0, 0, 0,},
[5] = {0, 0, 0, 0, 0,},
[6] = {0, MARKEINS_PCI_IRQ_INTC, MARKEINS_PCI_IRQ_INTD,
MARKEINS_PCI_IRQ_INTA, MARKEINS_PCI_IRQ_INTB,},
};
static void __devinit nec_usb_controller_fixup(struct pci_dev *dev)
{
if (PCI_SLOT(dev->devfn) == EMMA2RH_USB_SLOT)
/* on board USB controller configuration */
pci_write_config_dword(dev, 0xe4, 1 << 5);
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
nec_usb_controller_fixup);
/*
* Prevent the PCI layer from seeing the resources allocated to this device
* if it is the host bridge by marking it as such. These resources are of
* no consequence to the PCI layer (they are handled elsewhere).
*/
static void __devinit emma2rh_pci_host_fixup(struct pci_dev *dev)
{
int i;
if (PCI_SLOT(dev->devfn) == EMMA2RH_PCI_HOST_SLOT) {
dev->class &= 0xff;
dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
dev->resource[i].start = 0;
dev->resource[i].end = 0;
dev->resource[i].flags = 0;
}
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_EMMA2RH,
emma2rh_pci_host_fixup);
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
return irq_map[slot][pin];
}
/* Do platform specific device initialization at pci_enable_device() time */
int pcibios_plat_dev_init(struct pci_dev *dev)
{
return 0;
}
arch/mips/pci/ops-emma2rh.c 0 → 100644
View file @ 355c471f
/*
* arch/mips/pci/ops-emma2rh.c
* This file defines the PCI operation for EMMA2RH.
*
* Copyright (C) NEC Electronics Corporation 2004-2006
*
* This file is based on the arch/mips/pci/ops-vr41xx.c
*
* Copyright 2001 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <asm/addrspace.h>
#include <asm/debug.h>
#include <asm/emma2rh/emma2rh.h>
#define RTABORT (0x1<<9)
#define RMABORT (0x1<<10)
#define EMMA2RH_PCI_SLOT_NUM 9 /* 0000:09.0 is final PCI device */
/*
* access config space
*/
static int check_args(struct pci_bus *bus, u32 devfn, u32 * bus_num)
{
/* check if the bus is top-level */
if (bus->parent != NULL) {
*bus_num = bus->number;
db_assert(bus_num != 0);
} else
*bus_num = 0;
if (*bus_num == 0) {
/* Type 0 */
if (PCI_SLOT(devfn) >= 10)
return PCIBIOS_DEVICE_NOT_FOUND;
} else {
/* Type 1 */
if ((*bus_num >= 64) || (PCI_SLOT(devfn) >= 16))
return PCIBIOS_DEVICE_NOT_FOUND;
}
return 0;
}
static inline int set_pci_configuration_address(unsigned char bus_num,
unsigned int devfn, int where)
{
u32 config_win0;
emma2rh_out32(EMMA2RH_PCI_INT, ~RMABORT);
if (bus_num == 0)
/*
* Type 0 configuration
*/
config_win0 = (1 << (22 + PCI_SLOT(devfn))) | (5 << 9);
else
/*
* Type 1 configuration
*/
config_win0 = (bus_num << 26) | (PCI_SLOT(devfn) << 22) |
(1 << 15) | (5 << 9);
emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, config_win0);
return 0;
}
static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where,
int size, uint32_t * val)
{
u32 bus_num;
u32 base = KSEG1ADDR(EMMA2RH_PCI_CONFIG_BASE);
u32 backup_win0;
u32 data;
*val = 0xffffffffU;
if (check_args(bus, devfn, &bus_num) == PCIBIOS_DEVICE_NOT_FOUND)
return PCIBIOS_DEVICE_NOT_FOUND;
backup_win0 = emma2rh_in32(EMMA2RH_PCI_IWIN0_CTR);
if (set_pci_configuration_address(bus_num, devfn, where) < 0)
return PCIBIOS_DEVICE_NOT_FOUND;
data =
*(volatile u32 *)(base + (PCI_FUNC(devfn) << 8) +
(where & 0xfffffffc));
switch (size) {
case 1:
*val = (data >> ((where & 3) << 3)) & 0xffU;
break;
case 2:
*val = (data >> ((where & 2) << 3)) & 0xffffU;
break;
case 4:
*val = data;
break;
default:
emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, backup_win0);
return PCIBIOS_FUNC_NOT_SUPPORTED;
}
emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, backup_win0);
if (emma2rh_in32(EMMA2RH_PCI_INT) & RMABORT)
return PCIBIOS_DEVICE_NOT_FOUND;
return PCIBIOS_SUCCESSFUL;
}
static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 val)
{
u32 bus_num;
u32 base = KSEG1ADDR(EMMA2RH_PCI_CONFIG_BASE);
u32 backup_win0;
u32 data;
int shift;
if (check_args(bus, devfn, &bus_num) == PCIBIOS_DEVICE_NOT_FOUND)
return PCIBIOS_DEVICE_NOT_FOUND;
backup_win0 = emma2rh_in32(EMMA2RH_PCI_IWIN0_CTR);
if (set_pci_configuration_address(bus_num, devfn, where) < 0)
return PCIBIOS_DEVICE_NOT_FOUND;
/* read modify write */
data =
*(volatile u32 *)(base + (PCI_FUNC(devfn) << 8) +
(where & 0xfffffffc));
switch (size) {
case 1:
shift = (where & 3) << 3;
data &= ~(0xffU << shift);
data |= ((val & 0xffU) << shift);
break;
case 2:
shift = (where & 2) << 3;
data &= ~(0xffffU << shift);
data |= ((val & 0xffffU) << shift);
break;
case 4:
data = val;
break;
default:
emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, backup_win0);
return PCIBIOS_FUNC_NOT_SUPPORTED;
}
*(volatile u32 *)(base + (PCI_FUNC(devfn) << 8) +
(where & 0xfffffffc)) = data;
emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, backup_win0);
if (emma2rh_in32(EMMA2RH_PCI_INT) & RMABORT)
return PCIBIOS_DEVICE_NOT_FOUND;
return PCIBIOS_SUCCESSFUL;
}
struct pci_ops emma2rh_pci_ops = {
.read = pci_config_read,
.write = pci_config_write,
};
arch/mips/pci/pci-emma2rh.c 0 → 100644
View file @ 355c471f
/*
* arch/mips/pci/pci-emma2rh.c
* This file defines the PCI configration.
*
* Copyright (C) NEC Electronics Corporation 2004-2006
*
* This file is based on the arch/mips/ddb5xxx/ddb5477/pci.c
*
* Copyright 2001 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <asm/bootinfo.h>
#include <asm/debug.h>
#include <asm/emma2rh/emma2rh.h>
static struct resource pci_io_resource = {
.name = "pci IO space",
.start = EMMA2RH_PCI_IO_BASE,
.end = EMMA2RH_PCI_IO_BASE + EMMA2RH_PCI_IO_SIZE - 1,
.flags = IORESOURCE_IO,
};
static struct resource pci_mem_resource = {
.name = "pci memory space",
.start = EMMA2RH_PCI_MEM_BASE,
.end = EMMA2RH_PCI_MEM_BASE + EMMA2RH_PCI_MEM_SIZE - 1,
.flags = IORESOURCE_MEM,
};
extern struct pci_ops emma2rh_pci_ops;
static struct pci_controller emma2rh_pci_controller = {
.pci_ops = &emma2rh_pci_ops,
.mem_resource = &pci_mem_resource,
.io_resource = &pci_io_resource,
.mem_offset = -0x04000000,
.io_offset = 0,
};
static void __init emma2rh_pci_init(void)
{
/* setup PCI interface */
emma2rh_out32(EMMA2RH_PCI_ARBIT_CTR, 0x70f);
emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, 0x80000a18);
emma2rh_out32(EMMA2RH_PCI_CONFIG_BASE + PCI_COMMAND,
PCI_STATUS_DEVSEL_MEDIUM | PCI_STATUS_CAP_LIST |
PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
emma2rh_out32(EMMA2RH_PCI_CONFIG_BASE + PCI_BASE_ADDRESS_0, 0x10000000);
emma2rh_out32(EMMA2RH_PCI_CONFIG_BASE + PCI_BASE_ADDRESS_1, 0x00000000);
emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, 0x12000000 | 0x218);
emma2rh_out32(EMMA2RH_PCI_IWIN1_CTR, 0x18000000 | 0x600);
emma2rh_out32(EMMA2RH_PCI_INIT_ESWP, 0x00000200);
emma2rh_out32(EMMA2RH_PCI_TWIN_CTR, 0x00009200);
emma2rh_out32(EMMA2RH_PCI_TWIN_BADR, 0x00000000);
emma2rh_out32(EMMA2RH_PCI_TWIN0_DADR, 0x00000000);
emma2rh_out32(EMMA2RH_PCI_TWIN1_DADR, 0x00000000);
}
static int __init emma2rh_pci_setup(void)
{
emma2rh_pci_init();
register_pci_controller(&emma2rh_pci_controller);
return 0;
}
arch_initcall(emma2rh_pci_setup);
include/asm-mips/bootinfo.h
View file @ 355c471f
...@@ -218,6 +218,12 @@ ...@@ -218,6 +218,12 @@
#define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */ #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */
#define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */ #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */
/*
* Valid machtype for group NEC EMMA2RH
*/
#define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */
#define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */
#define CL_SIZE COMMAND_LINE_SIZE #define CL_SIZE COMMAND_LINE_SIZE
const char *get_system_type(void); const char *get_system_type(void);
......
include/asm-mips/emma2rh/emma2rh.h 0 → 100644
View file @ 355c471f
/*
* include/asm-mips/emma2rh/emma2rh.h
* This file is EMMA2RH common header.
*
* Copyright (C) NEC Electronics Corporation 2005-2006
*
* This file based on include/asm-mips/ddb5xxx/ddb5xxx.h
* Copyright 2001 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_EMMA2RH_EMMA2RH_H
#define __ASM_EMMA2RH_EMMA2RH_H
/*
* EMMA2RH registers
*/
#define REGBASE 0x10000000
#define EMMA2RH_BHIF_STRAP_0 (0x000010+REGBASE)
#define EMMA2RH_BHIF_INT_ST_0 (0x000030+REGBASE)
#define EMMA2RH_BHIF_INT_ST_1 (0x000034+REGBASE)
#define EMMA2RH_BHIF_INT_ST_2 (0x000038+REGBASE)
#define EMMA2RH_BHIF_INT_EN_0 (0x000040+REGBASE)
#define EMMA2RH_BHIF_INT_EN_1 (0x000044+REGBASE)
#define EMMA2RH_BHIF_INT_EN_2 (0x000048+REGBASE)
#define EMMA2RH_BHIF_INT1_EN_0 (0x000050+REGBASE)
#define EMMA2RH_BHIF_INT1_EN_1 (0x000054+REGBASE)
#define EMMA2RH_BHIF_INT1_EN_2 (0x000058+REGBASE)
#define EMMA2RH_BHIF_SW_INT (0x000070+REGBASE)
#define EMMA2RH_BHIF_SW_INT_EN (0x000080+REGBASE)
#define EMMA2RH_BHIF_SW_INT_CLR (0x000090+REGBASE)
#define EMMA2RH_BHIF_MAIN_CTRL (0x0000b4+REGBASE)
#define EMMA2RH_BHIF_EXCEPT_VECT_BASE_ADDRESS (0x0000c0+REGBASE)
#define EMMA2RH_GPIO_DIR (0x110d20+REGBASE)
#define EMMA2RH_GPIO_INT_ST (0x110d30+REGBASE)
#define EMMA2RH_GPIO_INT_MASK (0x110d3c+REGBASE)
#define EMMA2RH_GPIO_INT_MODE (0x110d48+REGBASE)
#define EMMA2RH_GPIO_INT_CND_A (0x110d54+REGBASE)
#define EMMA2RH_GPIO_INT_CND_B (0x110d60+REGBASE)
#define EMMA2RH_PBRD_INT_EN (0x100010+REGBASE)
#define EMMA2RH_PBRD_CLKSEL (0x100028+REGBASE)
#define EMMA2RH_PFUR0_BASE (0x101000+REGBASE)
#define EMMA2RH_PFUR1_BASE (0x102000+REGBASE)
#define EMMA2RH_PFUR2_BASE (0x103000+REGBASE)
#define EMMA2RH_PIIC0_BASE (0x107000+REGBASE)
#define EMMA2RH_PIIC1_BASE (0x108000+REGBASE)
#define EMMA2RH_PIIC2_BASE (0x109000+REGBASE)
#define EMMA2RH_PCI_CONTROL (0x200000+REGBASE)
#define EMMA2RH_PCI_ARBIT_CTR (0x200004+REGBASE)
#define EMMA2RH_PCI_IWIN0_CTR (0x200010+REGBASE)
#define EMMA2RH_PCI_IWIN1_CTR (0x200014+REGBASE)
#define EMMA2RH_PCI_INIT_ESWP (0x200018+REGBASE)
#define EMMA2RH_PCI_INT (0x200020+REGBASE)
#define EMMA2RH_PCI_INT_EN (0x200024+REGBASE)
#define EMMA2RH_PCI_TWIN_CTR (0x200030+REGBASE)
#define EMMA2RH_PCI_TWIN_BADR (0x200034+REGBASE)
#define EMMA2RH_PCI_TWIN0_DADR (0x200038+REGBASE)
#define EMMA2RH_PCI_TWIN1_DADR (0x20003c+REGBASE)
/*
* Memory map (physical address)
*
* Note most of the following address must be properly aligned by the
* corresponding size. For example, if PCI_IO_SIZE is 16MB, then
* PCI_IO_BASE must be aligned along 16MB boundary.
*/
/* the actual ram size is detected at run-time */
#define EMMA2RH_RAM_BASE 0x00000000
#define EMMA2RH_RAM_SIZE 0x10000000 /* less than 256MB */
#define EMMA2RH_IO_BASE 0x10000000
#define EMMA2RH_IO_SIZE 0x01000000 /* 16 MB */
#define EMMA2RH_GENERALIO_BASE 0x11000000
#define EMMA2RH_GENERALIO_SIZE 0x01000000 /* 16 MB */
#define EMMA2RH_PCI_IO_BASE 0x12000000
#define EMMA2RH_PCI_IO_SIZE 0x02000000 /* 32 MB */
#define EMMA2RH_PCI_MEM_BASE 0x14000000
#define EMMA2RH_PCI_MEM_SIZE 0x08000000 /* 128 MB */
#define EMMA2RH_ROM_BASE 0x1c000000
#define EMMA2RH_ROM_SIZE 0x04000000 /* 64 MB */
#define EMMA2RH_PCI_CONFIG_BASE EMMA2RH_PCI_IO_BASE
#define EMMA2RH_PCI_CONFIG_SIZE EMMA2RH_PCI_IO_SIZE
#define NUM_CPU_IRQ 8
#define NUM_EMMA2RH_IRQ 96
#define CPU_EMMA2RH_CASCADE 2
#define EMMA2RH_IRQ_BASE 0
/*
* emma2rh irq defs
*/
#define EMMA2RH_IRQ_INT0 (0 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT1 (1 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT2 (2 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT3 (3 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT4 (4 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT5 (5 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT6 (6 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT7 (7 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT8 (8 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT9 (9 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT10 (10 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT11 (11 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT12 (12 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT13 (13 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT14 (14 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT15 (15 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT16 (16 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT17 (17 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT18 (18 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT19 (19 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT20 (20 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT21 (21 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT22 (22 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT23 (23 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT24 (24 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT25 (25 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT26 (26 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT27 (27 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT28 (28 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT29 (29 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT30 (30 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT31 (31 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT32 (32 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT33 (33 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT34 (34 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT35 (35 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT36 (36 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT37 (37 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT38 (38 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT39 (39 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT40 (40 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT41 (41 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT42 (42 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT43 (43 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT44 (44 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT45 (45 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT46 (46 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT47 (47 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT48 (48 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT49 (49 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT50 (50 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT51 (51 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT52 (52 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT53 (53 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT54 (54 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT55 (55 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT56 (56 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT57 (57 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT58 (58 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT59 (59 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT60 (60 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT61 (61 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT62 (62 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_INT63 (63 + EMMA2RH_IRQ_BASE)
#define EMMA2RH_IRQ_PFUR0 EMMA2RH_IRQ_INT49
#define EMMA2RH_IRQ_PFUR1 EMMA2RH_IRQ_INT50
#define EMMA2RH_IRQ_PFUR2 EMMA2RH_IRQ_INT51
#define EMMA2RH_IRQ_PIIC0 EMMA2RH_IRQ_INT56
#define EMMA2RH_IRQ_PIIC1 EMMA2RH_IRQ_INT57
#define EMMA2RH_IRQ_PIIC2 EMMA2RH_IRQ_INT58
/*
* EMMA2RH Register Access
*/
#define EMMA2RH_BASE (0xa0000000)
static inline void emma2rh_sync(void)
{
volatile u32 *p = (volatile u32 *)0xbfc00000;
(void)(*p);
}
static inline void emma2rh_out32(u32 offset, u32 val)
{
*(volatile u32 *)(EMMA2RH_BASE | offset) = val;
emma2rh_sync();
}
static inline u32 emma2rh_in32(u32 offset)
{
u32 val = *(volatile u32 *)(EMMA2RH_BASE | offset);
emma2rh_sync();
return val;
}
static inline void emma2rh_out16(u32 offset, u16 val)
{
*(volatile u16 *)(EMMA2RH_BASE | offset) = val;
emma2rh_sync();
}
static inline u16 emma2rh_in16(u32 offset)
{
u16 val = *(volatile u16 *)(EMMA2RH_BASE | offset);
emma2rh_sync();
return val;
}
static inline void emma2rh_out8(u32 offset, u8 val)
{
*(volatile u8 *)(EMMA2RH_BASE | offset) = val;
emma2rh_sync();
}
static inline u8 emma2rh_in8(u32 offset)
{
u8 val = *(volatile u8 *)(EMMA2RH_BASE | offset);
emma2rh_sync();
return val;
}
/**
* IIC registers map
**/
/*---------------------------------------------------------------------------*/
/* CNT - Control register (00H R/W) */
/*---------------------------------------------------------------------------*/
#define SPT 0x00000001
#define STT 0x00000002
#define ACKE 0x00000004
#define WTIM 0x00000008
#define SPIE 0x00000010
#define WREL 0x00000020
#define LREL 0x00000040
#define IICE 0x00000080
#define CNT_RESERVED 0x000000ff /* reserved bit 0 */
#define I2C_EMMA_START (IICE | STT)
#define I2C_EMMA_STOP (IICE | SPT)
#define I2C_EMMA_REPSTART I2C_EMMA_START
/*---------------------------------------------------------------------------*/
/* STA - Status register (10H Read) */
/*---------------------------------------------------------------------------*/
#define MSTS 0x00000080
#define ALD 0x00000040
#define EXC 0x00000020
#define COI 0x00000010
#define TRC 0x00000008
#define ACKD 0x00000004
#define STD 0x00000002
#define SPD 0x00000001
/*---------------------------------------------------------------------------*/
/* CSEL - Clock select register (20H R/W) */
/*---------------------------------------------------------------------------*/
#define FCL 0x00000080
#define ND50 0x00000040
#define CLD 0x00000020
#define DAD 0x00000010
#define SMC 0x00000008
#define DFC 0x00000004
#define CL 0x00000003
#define CSEL_RESERVED 0x000000ff /* reserved bit 0 */
#define FAST397 0x0000008b
#define FAST297 0x0000008a
#define FAST347 0x0000000b
#define FAST260 0x0000000a
#define FAST130 0x00000008
#define STANDARD108 0x00000083
#define STANDARD83 0x00000082
#define STANDARD95 0x00000003
#define STANDARD73 0x00000002
#define STANDARD36 0x00000001
#define STANDARD71 0x00000000
/*---------------------------------------------------------------------------*/
/* SVA - Slave address register (30H R/W) */
/*---------------------------------------------------------------------------*/
#define SVA 0x000000fe
/*---------------------------------------------------------------------------*/
/* SHR - Shift register (40H R/W) */
/*---------------------------------------------------------------------------*/
#define SR 0x000000ff
/*---------------------------------------------------------------------------*/
/* INT - Interrupt register (50H R/W) */
/* INTM - Interrupt mask register (60H R/W) */
/*---------------------------------------------------------------------------*/
#define INTE0 0x00000001
/***********************************************************************
* I2C registers
***********************************************************************
*/
#define I2C_EMMA_CNT 0x00
#define I2C_EMMA_STA 0x10
#define I2C_EMMA_CSEL 0x20
#define I2C_EMMA_SVA 0x30
#define I2C_EMMA_SHR 0x40
#define I2C_EMMA_INT 0x50
#define I2C_EMMA_INTM 0x60
/*
* include the board dependent part
*/
#if defined(CONFIG_MARKEINS)
#include <asm/emma2rh/markeins.h>
#else
#error "Unknown EMMA2RH board!"
#endif
#endif /* __ASM_EMMA2RH_EMMA2RH_H */
include/asm-mips/emma2rh/markeins.h 0 → 100644
View file @ 355c471f
/*
* include/asm-mips/emma2rh/markeins.h
* This file is EMMA2RH board depended header.
*
* Copyright (C) NEC Electronics Corporation 2005-2006
*
* This file based on include/asm-mips/ddb5xxx/ddb5xxx.h
* Copyright 2001 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef MARKEINS_H
#define MARKEINS_H
#define NUM_EMMA2RH_IRQ_SW 32
#define NUM_EMMA2RH_IRQ_GPIO 32
#define EMMA2RH_SW_CASCADE (EMMA2RH_IRQ_INT7 - EMMA2RH_IRQ_INT0)
#define EMMA2RH_GPIO_CASCADE (EMMA2RH_IRQ_INT46 - EMMA2RH_IRQ_INT0)
#define EMMA2RH_SW_IRQ_BASE (EMMA2RH_IRQ_BASE + NUM_EMMA2RH_IRQ)
#define EMMA2RH_GPIO_IRQ_BASE (EMMA2RH_SW_IRQ_BASE + NUM_EMMA2RH_IRQ_SW)
#define CPU_IRQ_BASE (EMMA2RH_GPIO_IRQ_BASE + NUM_EMMA2RH_IRQ_GPIO)
#define EMMA2RH_SW_IRQ_INT0 (0+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT1 (1+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT2 (2+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT3 (3+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT4 (4+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT5 (5+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT6 (6+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT7 (7+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT8 (8+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT9 (9+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT10 (10+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT11 (11+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT12 (12+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT13 (13+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT14 (14+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT15 (15+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT16 (16+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT17 (17+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT18 (18+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT19 (19+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT20 (20+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT21 (21+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT22 (22+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT23 (23+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT24 (24+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT25 (25+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT26 (26+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT27 (27+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT28 (28+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT29 (29+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT30 (30+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT31 (31+EMMA2RH_SW_IRQ_BASE)
#define MARKEINS_PCI_IRQ_INTA EMMA2RH_GPIO_IRQ_BASE+15
#define MARKEINS_PCI_IRQ_INTB EMMA2RH_GPIO_IRQ_BASE+16
#define MARKEINS_PCI_IRQ_INTC EMMA2RH_GPIO_IRQ_BASE+17
#define MARKEINS_PCI_IRQ_INTD EMMA2RH_GPIO_IRQ_BASE+18
#endif /* CONFIG_MARKEINS */
include/asm-mips/mach-emma2rh/irq.h 0 → 100644
View file @ 355c471f
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003 by Ralf Baechle
*/
#ifndef __ASM_MACH_EMMA2RH_IRQ_H
#define __ASM_MACH_EMMA2RH_IRQ_H
#define NR_IRQS 256
#endif /* __ASM_MACH_EMMA2RH_IRQ_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment