Skip to content

L
linux-davinci
Commit 33471629 authored by Eilon Greenstein's avatar Eilon Greenstein Committed by David S. Miller
Browse files
Options

bnx2x: Spelling mistakes 

Spelling mistakes
Spelling has to L's in it...
Signed-off-by: default avatarEilon Greenstein <eilong@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 3196a88a
Show whitespace changes
Inline Side-by-side
Showing with 39 additions and 39 deletions
drivers/net/bnx2x.h
View file @ 33471629
......@@ -155,7 +155,7 @@ struct sw_rx_page {
#define NUM_RX_SGE_PAGES 2
#define RX_SGE_CNT (BCM_PAGE_SIZE / sizeof(struct eth_rx_sge))
#define MAX_RX_SGE_CNT (RX_SGE_CNT - 2)
/* RX_SGE_CNT is promissed to be a power of 2 */
/* RX_SGE_CNT is promised to be a power of 2 */
#define RX_SGE_MASK (RX_SGE_CNT - 1)
#define NUM_RX_SGE (RX_SGE_CNT * NUM_RX_SGE_PAGES)
#define MAX_RX_SGE (NUM_RX_SGE - 1)
......@@ -317,7 +317,7 @@ struct bnx2x_fastpath {
#define RCQ_BD(x) ((x) & MAX_RCQ_BD)
/* This is needed for determening of last_max */
/* This is needed for determining of last_max */
#define SUB_S16(a, b) (s16)((s16)(a) - (s16)(b))
#define __SGE_MASK_SET_BIT(el, bit) \
......@@ -784,7 +784,7 @@ struct bnx2x {
u8 stats_pending;
u8 set_mac_pending;
/* End of fileds used in the performance code paths */
/* End of fields used in the performance code paths */
int panic;
int msglevel;
......@@ -1024,10 +1024,10 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
/* resolution of the rate shaping timer - 100 usec */
#define RS_PERIODIC_TIMEOUT_USEC 100
/* resolution of fairness algorithm in usecs -
coefficient for clauclating the actuall t fair */
coefficient for calculating the actual t fair */
#define T_FAIR_COEF 10000000
/* number of bytes in single QM arbitration cycle -
coeffiecnt for calculating the fairness timer */
coefficient for calculating the fairness timer */
#define QM_ARB_BYTES 40000
#define FAIR_MEM 2
......
drivers/net/bnx2x_hsi.h
View file @ 33471629
......@@ -1268,7 +1268,7 @@ struct doorbell {
/*
* IGU driver acknowlegement register
* IGU driver acknowledgement register
*/
struct igu_ack_register {
#if defined(__BIG_ENDIAN)
......@@ -1882,7 +1882,7 @@ struct timers_block_context {
};
/*
* structure for easy accessability to assembler
* structure for easy accessibility to assembler
*/
struct eth_tx_bd_flags {
u8 as_bitfield;
......@@ -2044,7 +2044,7 @@ struct eth_context {
/*
* ethernet doorbell
* Ethernet doorbell
*/
struct eth_tx_doorbell {
#if defined(__BIG_ENDIAN)
......@@ -2256,7 +2256,7 @@ struct ramrod_data {
};
/*
* union for ramrod data for ethernet protocol (CQE) (force size of 16 bits)
* union for ramrod data for Ethernet protocol (CQE) (force size of 16 bits)
*/
union eth_ramrod_data {
struct ramrod_data general;
......@@ -2330,7 +2330,7 @@ struct spe_hdr {
};
/*
* ethernet slow path element
* Ethernet slow path element
*/
union eth_specific_data {
u8 protocol_data[8];
......@@ -2343,7 +2343,7 @@ union eth_specific_data {
};
/*
* ethernet slow path element
* Ethernet slow path element
*/
struct eth_spe {
struct spe_hdr hdr;
......@@ -2615,7 +2615,7 @@ struct tstorm_eth_rx_producers {
/*
* common flag to indicate existance of TPA.
* common flag to indicate existence of TPA.
*/
struct tstorm_eth_tpa_exist {
#if defined(__BIG_ENDIAN)
......@@ -2765,7 +2765,7 @@ struct tstorm_common_stats {
};
/*
* Eth statistics query sturcture for the eth_stats_quesry ramrod
* Eth statistics query structure for the eth_stats_query ramrod
*/
struct eth_stats_query {
struct xstorm_common_stats xstorm_common;
......
drivers/net/bnx2x_init.h
View file @ 33471629
......@@ -208,7 +208,7 @@ static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, const u32 *data,
/*********************************************************
There are different blobs for each PRAM section.
In addition, each blob write operation is divided into a few operations
in order to decrease the amount of phys. contigious buffer needed.
in order to decrease the amount of phys. contiguous buffer needed.
Thus, when we select a blob the address may be with some offset
from the beginning of PRAM section.
The same holds for the INT_TABLE sections.
......@@ -336,7 +336,7 @@ static void bnx2x_init_block(struct bnx2x *bp, u32 op_start, u32 op_end)
len = op->str_wr.data_len;
data = data_base + op->str_wr.data_off;
/* carefull! it must be in order */
/* careful! it must be in order */
if (unlikely(op_type > OP_WB)) {
/* If E1 only */
......@@ -740,7 +740,7 @@ static u8 calc_crc8(u32 data, u8 crc)
return crc_res;
}
/* regiesers addresses are not in order
/* registers addresses are not in order
so these arrays help simplify the code */
static const int cm_start[E1H_FUNC_MAX][9] = {
{MISC_FUNC0_START, TCM_FUNC0_START, UCM_FUNC0_START, CCM_FUNC0_START,
......
drivers/net/bnx2x_link.h
View file @ 33471629
......@@ -143,7 +143,7 @@ u8 bnx2x_cl45_write(struct bnx2x *bp, u8 port, u32 ext_phy_type,
u8 phy_addr, u8 devad, u16 reg, u16 val);
/* Reads the link_status from the shmem,
and update the link vars accordinaly */
and update the link vars accordingly */
void bnx2x_link_status_update(struct link_params *input,
struct link_vars *output);
/* returns string representing the fw_version of the external phy */
......@@ -152,7 +152,7 @@ u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
/* Set/Unset the led
Basically, the CLC takes care of the led for the link, but in case one needs
to set/unset the led unnatually, set the "mode" to LED_MODE_OPER to
to set/unset the led unnaturally, set the "mode" to LED_MODE_OPER to
blink the led, and LED_MODE_OFF to set the led off.*/
u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
u16 hw_led_mode, u32 chip_id);
......
drivers/net/bnx2x_main.c
View file @ 33471629
......@@ -1151,8 +1151,8 @@ static inline void bnx2x_init_sge_ring_bit_mask(struct bnx2x_fastpath *fp)
memset(fp->sge_mask, 0xff,
(NUM_RX_SGE >> RX_SGE_MASK_ELEM_SHIFT)*sizeof(u64));
/* Clear the two last indeces in the page to 1:
these are the indeces that correspond to the "next" element,
/* Clear the two last indices in the page to 1:
these are the indices that correspond to the "next" element,
hence will never be indicated and should be removed from
the calculations. */
bnx2x_clear_sge_mask_next_elems(fp);
......@@ -2011,7 +2011,7 @@ static u8 bnx2x_link_test(struct bnx2x *bp)
sum of vn_min_rates
or
0 - if all the min_rates are 0.
In the later case fainess algorithm should be deactivated.
In the later case fairness algorithm should be deactivated.
If not all min_rates are zero then those that are zeroes will
be set to 1.
*/
......@@ -2134,7 +2134,7 @@ static void bnx2x_init_vn_minmax(struct bnx2x *bp, int func,
FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
/* If FAIRNESS is enabled (not all min rates are zeroes) and
if current min rate is zero - set it to 1.
This is a requirment of the algorithm. */
This is a requirement of the algorithm. */
if ((vn_min_rate == 0) && wsum)
vn_min_rate = DEF_MIN_RATE;
vn_max_rate = ((vn_cfg & FUNC_MF_CFG_MAX_BW_MASK) >>
......@@ -6562,7 +6562,7 @@ static void bnx2x_reset_port(struct bnx2x *bp)
val = REG_RD(bp, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port*4);
if (val)
DP(NETIF_MSG_IFDOWN,
"BRB1 is not empty %d blooks are occupied\n", val);
"BRB1 is not empty %d blocks are occupied\n", val);
/* TODO: Close Doorbell port? */
}
......@@ -6602,7 +6602,7 @@ static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code)
}
}
/* msut be called with rtnl_lock */
/* must be called with rtnl_lock */
static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
{
int port = BP_PORT(bp);
......@@ -7455,7 +7455,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
if (BP_NOMCP(bp)) {
/* only supposed to happen on emulation/FPGA */
BNX2X_ERR("warning rendom MAC workaround active\n");
BNX2X_ERR("warning random MAC workaround active\n");
random_ether_addr(bp->dev->dev_addr);
memcpy(bp->dev->perm_addr, bp->dev->dev_addr, ETH_ALEN);
}
......@@ -8907,7 +8907,7 @@ static void bnx2x_self_test(struct net_device *dev,
if (!netif_running(dev))
return;
/* offline tests are not suppoerted in MF mode */
/* offline tests are not supported in MF mode */
if (IS_E1HMF(bp))
etest->flags &= ~ETH_TEST_FL_OFFLINE;
......@@ -9289,7 +9289,7 @@ poll_panic:
/* we split the first BD into headers and data BDs
* to ease the pain of our fellow micocode engineers
* to ease the pain of our fellow microcode engineers
* we use one mapping for both BDs
* So far this has only been observed to happen
* in Other Operating Systems(TM)
......@@ -9396,7 +9396,7 @@ static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb,
/* Check if LSO packet needs to be copied:
3 = 1 (for headers BD) + 2 (for PBD and last BD) */
int wnd_size = MAX_FETCH_BD - 3;
/* Number of widnows to check */
/* Number of windows to check */
int num_wnds = skb_shinfo(skb)->nr_frags - wnd_size;
int wnd_idx = 0;
int frag_idx = 0;
......@@ -9498,7 +9498,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
skb->ip_summed, skb->protocol, ipv6_hdr(skb)->nexthdr,
ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type);
/* First, check if we need to linearaize the skb
/* First, check if we need to linearize the skb
(due to FW restrictions) */
if (bnx2x_pkt_req_lin(bp, skb, xmit_type)) {
/* Statistics of linearization */
......
drivers/net/bnx2x_reg.h
View file @ 33471629
......@@ -6,7 +6,7 @@
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation.
*
* The registers description starts with the regsister Access type followed
* The registers description starts with the register Access type followed
* by size in bits. For example [RW 32]. The access types are:
* R - Read only
* RC - Clear on read
......@@ -49,7 +49,7 @@
/* [RW 10] Write client 0: Assert pause threshold. */
#define BRB1_REG_PAUSE_LOW_THRESHOLD_0 0x60068
#define BRB1_REG_PAUSE_LOW_THRESHOLD_1 0x6006c
/* [R 24] The number of full blocks occpied by port. */
/* [R 24] The number of full blocks occupied by port. */
#define BRB1_REG_PORT_NUM_OCC_BLOCKS_0 0x60094
/* [RW 1] Reset the design by software. */
#define BRB1_REG_SOFT_RESET 0x600dc
......@@ -1412,13 +1412,13 @@
#define MISC_REG_GPIO 0xa490
/* [R 28] this field hold the last information that caused reserved
attention. bits [19:0] - address; [22:20] function; [23] reserved;
[27:24] the master thatcaused the attention - according to the following
[27:24] the master that caused the attention - according to the following
encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
dbu; 8 = dmae */
#define MISC_REG_GRC_RSV_ATTN 0xa3c0
/* [R 28] this field hold the last information that caused timeout
attention. bits [19:0] - address; [22:20] function; [23] reserved;
[27:24] the master thatcaused the attention - according to the following
[27:24] the master that caused the attention - according to the following
encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
dbu; 8 = dmae */
#define MISC_REG_GRC_TIMEOUT_ATTN 0xa3c4
......@@ -2320,7 +2320,7 @@
/* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k;
-128k */
#define PXP2_REG_RQ_QM_P_SIZE 0x120050
/* [RW 1] 1' indicates that the RBC has finished configurating the PSWRQ */
/* [RW 1] 1' indicates that the RBC has finished configuring the PSWRQ */
#define PXP2_REG_RQ_RBC_DONE 0x1201b0
/* [RW 3] Max burst size filed for read requests port 0; 000 - 128B;
001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
......@@ -2428,7 +2428,7 @@
/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
buffer reaches this number has_payload will be asserted */
#define PXP2_REG_WR_DMAE_MPS 0x1205ec
/* [RW 10] if Number of entries in dmae fifo will be higer than this
/* [RW 10] if Number of entries in dmae fifo will be higher than this
threshold then has_payload indication will be asserted; the default value
should be equal to &gt; write MBS size! */
#define PXP2_REG_WR_DMAE_TH 0x120368
......@@ -2449,7 +2449,7 @@
/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
buffer reaches this number has_payload will be asserted */
#define PXP2_REG_WR_TSDM_MPS 0x1205d4
/* [RW 10] if Number of entries in usdmdp fifo will be higer than this
/* [RW 10] if Number of entries in usdmdp fifo will be higher than this
threshold then has_payload indication will be asserted; the default value
should be equal to &gt; write MBS size! */
#define PXP2_REG_WR_USDMDP_TH 0x120348
......@@ -3316,12 +3316,12 @@
#define XSEM_XSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
#define CFC_DEBUG1_REG_WRITE_AC (0x1<<4)
#define CFC_DEBUG1_REG_WRITE_AC_SIZE 4
/* [R 1] debug only: This bit indicates wheter indicates that external
/* [R 1] debug only: This bit indicates whether indicates that external
buffer was wrapped (oldest data was thrown); Relevant only when
~dbg_registers_debug_target=2 (PCI) & ~dbg_registers_full_mode=1 (wrap); */
#define DBG_REG_WRAP_ON_EXT_BUFFER 0xc124
#define DBG_REG_WRAP_ON_EXT_BUFFER_SIZE 1
/* [R 1] debug only: This bit indicates wheter the internal buffer was
/* [R 1] debug only: This bit indicates whether the internal buffer was
wrapped (oldest data was thrown) Relevant only when
~dbg_registers_debug_target=0 (internal buffer) */
#define DBG_REG_WRAP_ON_INT_BUFFER 0xc128
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment