[PATCH] ARM: OMAP: Support apollon board based on omap2420

default enabled features as following
	UART
	ethernet
	LCD
	sound + (needs spi patch:)
	OneNAND

arch/arm/mach-omap2/Kconfig

@@ -21,3 +21,6 @@ config MACH_OMAP_H4
 	depends on ARCH_OMAP2 && ARCH_OMAP24XX
 	select GPIOEXPANDER_OMAP
 
+config MACH_OMAP_APOLLON
+	bool "OMAP 2420 Apollon board"
+	depends on ARCH_OMAP2 && ARCH_OMAP24XX

arch/arm/mach-omap2/Makefile

@@ -13,4 +13,5 @@ obj-$(CONFIG_PM) += pm.o sleep.o
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
+obj-$(CONFIG_MACH_OMAP_APOLLON)		+= board-apollon.o
 

arch/arm/mach-omap2/board-apollon.c

+/*
+ * linux/arch/arm/mach-omap/omap2/board-apollon.c
+ *
+ * Copyright (C) 2005,2006 Samsung Electronics
+ * Author: Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * Modified from mach-omap/omap2/board-h4.c
+ *
+ * Code for apollon OMAP2 board. Should work on many OMAP2 systems where
+ * the bootloader passes the board-specific data to the kernel.
+ * Do not put any board specific code to this file; create a new machine
+ * type if you need custom low-level initializations.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/onenand.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/board.h>
+#include <asm/arch/common.h>
+#include "prcm-regs.h"
+
+/* LED & Switch macros */
+#define LED0_GPIO13		13
+#define LED1_GPIO14		14
+#define LED2_GPIO15		15
+#define SW_ENTER_GPIO16		16
+#define SW_UP_GPIO17		17
+#define SW_DOWN_GPIO58		58
+
+static struct mtd_partition apollon_partitions[] = {
+	{
+		.name		= "X-Loader + U-Boot",
+		.offset		= 0,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_2M,
+	},
+	{
+		.name		= "rootfs",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_16M,
+	},
+	{
+		.name		= "filesystem00",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_32M,
+	},
+	{
+		.name		= "filesystem01",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct flash_platform_data apollon_flash_data = {
+	.parts		= apollon_partitions,
+	.nr_parts	= ARRAY_SIZE(apollon_partitions),
+};
+
+static struct resource apollon_flash_resource = {
+	.start		= APOLLON_CS0_BASE,
+	.end		= APOLLON_CS0_BASE + SZ_128K,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device apollon_onenand_device = {
+	.name		= "onenand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &apollon_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(&apollon_flash_resource),
+	.resource	= &apollon_flash_resource,
+};
+
+static struct resource apollon_smc91x_resources[] = {
+	[0] = {
+		.start	= APOLLON_ETHR_START,		/* Physical */
+		.end	= APOLLON_ETHR_START + 0xf,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
+		.end	= OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device apollon_smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(apollon_smc91x_resources),
+	.resource	= apollon_smc91x_resources,
+};
+
+static struct platform_device *apollon_devices[] __initdata = {
+	&apollon_onenand_device,
+	&apollon_smc91x_device,
+};
+
+static inline void __init apollon_init_smc91x(void)
+{
+	/* Make sure CS1 timings are correct */
+	GPMC_CONFIG1_1 = 0x00011203;
+	GPMC_CONFIG2_1 = 0x001f1f01;
+	GPMC_CONFIG3_1 = 0x00080803;
+	GPMC_CONFIG4_1 = 0x1c091c09;
+	GPMC_CONFIG5_1 = 0x041f1f1f;
+	GPMC_CONFIG6_1 = 0x000004c4;
+	GPMC_CONFIG7_1 = 0x00000f40 | (APOLLON_CS1_BASE >> 24);
+	udelay(100);
+
+	omap_cfg_reg(W4__24XX_GPIO74);
+	if (omap_request_gpio(APOLLON_ETHR_GPIO_IRQ) < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
+			APOLLON_ETHR_GPIO_IRQ);
+		return;
+	}
+	omap_set_gpio_direction(APOLLON_ETHR_GPIO_IRQ, 1);
+}
+
+static void __init omap_apollon_init_irq(void)
+{
+	omap2_init_common_hw();
+	omap_init_irq();
+	omap_gpio_init();
+	apollon_init_smc91x();
+}
+
+static struct omap_uart_config apollon_uart_config __initdata = {
+	.enabled_uarts = (1 << 0) | (0 << 1) | (0 << 2),
+};
+
+static struct omap_mmc_config apollon_mmc_config __initdata = {
+	.mmc [0] = {
+		.enabled 	= 0,
+		.wire4		= 0,
+		.wp_pin		= -1,
+		.power_pin	= -1,
+		.switch_pin	= -1,
+	},
+};
+
+static struct omap_lcd_config apollon_lcd_config __initdata = {
+	.panel_name	= "apollon",
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel apollon_config[] = {
+	{ OMAP_TAG_UART,	&apollon_uart_config },
+	{ OMAP_TAG_MMC,		&apollon_mmc_config },
+	{ OMAP_TAG_LCD,		&apollon_lcd_config },
+};
+
+static void __init apollon_led_init(void)
+{
+	/* LED0 - AA10 */
+	omap_cfg_reg(AA10_242X_GPIO13);
+	omap_request_gpio(LED0_GPIO13);
+	omap_set_gpio_direction(LED0_GPIO13, 0);
+	omap_set_gpio_dataout(LED0_GPIO13, 0);
+	/* LED1  - AA6 */
+	omap_cfg_reg(AA6_242X_GPIO14);
+	omap_request_gpio(LED1_GPIO14);
+	omap_set_gpio_direction(LED1_GPIO14, 0);
+	omap_set_gpio_dataout(LED1_GPIO14, 0);
+	/* LED2  - AA4 */
+	omap_cfg_reg(AA4_242X_GPIO15);
+	omap_request_gpio(LED2_GPIO15);
+	omap_set_gpio_direction(LED2_GPIO15, 0);
+	omap_set_gpio_dataout(LED2_GPIO15, 0);
+}
+
+static irqreturn_t apollon_sw_interrupt(int irq, void *ignored, struct pt_regs *regs)
+{
+	static unsigned int led0, led1, led2;
+
+	if (irq == OMAP_GPIO_IRQ(SW_ENTER_GPIO16))
+		omap_set_gpio_dataout(LED0_GPIO13, led0 ^= 1);
+	else if (irq == OMAP_GPIO_IRQ(SW_UP_GPIO17))
+		omap_set_gpio_dataout(LED1_GPIO14, led1 ^= 1);
+	else if (irq == OMAP_GPIO_IRQ(SW_DOWN_GPIO58))
+		omap_set_gpio_dataout(LED2_GPIO15, led2 ^= 1);
+
+	return IRQ_HANDLED;
+}
+
+static void __init apollon_sw_init(void)
+{
+	/* Enter SW - Y11 */
+	omap_cfg_reg(Y11_242X_GPIO16);
+	omap_request_gpio(SW_ENTER_GPIO16);
+	omap_set_gpio_direction(SW_ENTER_GPIO16, 1);
+	/* Up SW - AA12 */
+	omap_cfg_reg(AA12_242X_GPIO17);
+	omap_request_gpio(SW_UP_GPIO17);
+	omap_set_gpio_direction(SW_UP_GPIO17, 1);
+	/* Down SW - AA8 */
+	omap_cfg_reg(AA8_242X_GPIO58);
+	omap_request_gpio(SW_DOWN_GPIO58);
+	omap_set_gpio_direction(SW_DOWN_GPIO58, 1);
+
+	set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQT_RISING);
+	if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
+				SA_SHIRQ, "enter sw",
+				&apollon_sw_interrupt))
+		return;
+	set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQT_RISING);
+	if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt,
+				SA_SHIRQ, "up sw",
+				&apollon_sw_interrupt))
+		return;
+	set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQT_RISING);
+	if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt,
+				SA_SHIRQ, "down sw",
+				&apollon_sw_interrupt))
+		return;
+}
+
+static void __init omap_apollon_init(void)
+{
+	apollon_led_init();
+	apollon_sw_init();
+
+	/* REVISIT: where's the correct place */
+	omap_cfg_reg(W19_24XX_SYS_NIRQ);
+
+	/*
+ 	 * Make sure the serial ports are muxed on at this point.
+	 * You have to mux them off in device drivers later on
+	 * if not needed.
+	 */
+	platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
+	omap_board_config = apollon_config;
+	omap_board_config_size = ARRAY_SIZE(apollon_config);
+	omap_serial_init();
+}
+
+static void __init omap_apollon_map_io(void)
+{
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
+	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
+	.phys_ram	= 0x80000000,
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_apollon_map_io,
+	.init_irq	= omap_apollon_init_irq,
+	.init_machine	= omap_apollon_init,
+	.timer		= &omap_timer,
+MACHINE_END

arch/arm/mach-omap2/mux.c

@@ -60,7 +60,15 @@ MUX_CFG_24XX("W15_24XX_MCBSP2_DR",	0x126,	1,	1,	0,	1)
 MUX_CFG_24XX("V15_24XX_MCBSP2_DX",	0x127,	1,	1,	0,	1)
 
 /* 24xx GPIO */
+MUX_CFG_24XX("M21_242X_GPIO11",	 0x0c9,  3,      1,      1,      1)
+MUX_CFG_24XX("AA10_242X_GPIO13",	0x0e5,  3,      0,      0,      1)
+MUX_CFG_24XX("AA6_242X_GPIO14",	 0x0e6,  3,      0,      0,      1)
+MUX_CFG_24XX("AA4_242X_GPIO15",	 0x0e7,  3,      0,      0,      1)
+MUX_CFG_24XX("Y11_242X_GPIO16",	 0x0e8,  3,      0,      0,      1)
+MUX_CFG_24XX("AA12_242X_GPIO17",	0x0e9,  3,      0,      0,      1)
+MUX_CFG_24XX("AA8_242X_GPIO58",	 0x0ea,  3,      0,      0,      1)
 MUX_CFG_24XX("Y20_24XX_GPIO60",		0x12c,	3,	0,	0,	1)
+MUX_CFG_24XX("W4__24XX_GPIO74",	 0x0f2,  3,      0,      0,      1)
 MUX_CFG_24XX("M15_24XX_GPIO92",		0x10a,	3,	0,	0,	1)
 MUX_CFG_24XX("V14_24XX_GPIO117",	0x128,	3,	1,	0,	1)
 

arch/arm/mach-omap2/prcm-regs.h

@@ -424,6 +424,15 @@
 #define GPMC_CONFIG6_1		GPMC_REG32(0x0a4)
 #define GPMC_CONFIG7_1		GPMC_REG32(0x0a8)
 
+/* GPMC CS3 */
+#define GPMC_CONFIG1_3		GPMC_REG32(0x0F0)
+#define GPMC_CONFIG2_3		GPMC_REG32(0x0F4)
+#define GPMC_CONFIG3_3		GPMC_REG32(0x0F8)
+#define GPMC_CONFIG4_3		GPMC_REG32(0x0FC)
+#define GPMC_CONFIG5_3		GPMC_REG32(0x100)
+#define GPMC_CONFIG6_3		GPMC_REG32(0x104)
+#define GPMC_CONFIG7_3		GPMC_REG32(0x108)
+
 /* DSS */
 #define DSS_CONTROL		DISP_REG32(0x040)
 #define DISPC_CONTROL		DISP_REG32(0x440)

drivers/video/omap/Makefile

@@ -21,6 +21,7 @@ objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
 objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
 objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
 objs-y$(CONFIG_MACH_OMAP_PERSEUS2) += lcd_p2.o
+objs-y$(CONFIG_MACH_OMAP_APOLLON) += lcd_apollon.o
 
 omapfb-objs := $(objs-yy)
 

drivers/video/omap/lcd_apollon.c

+/*
+ * File: drivers/video/omap/lcd_apollon.c
+ *
+ * LCD panel support for the Samsung OMAP2 Apollon board
+ *
+ * Copyright (C) 2005,2006 Samsung Electronics
+ * Author: Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * Derived from drivers/video/omap/lcd-h4.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/module.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/omapfb.h>
+
+/* #define OMAPFB_DBG 1 */
+
+/* #define USE_35INCH_LCD 1 */
+
+#include "debug.h"
+
+static int apollon_panel_init(struct omapfb_device *fbdev)
+{
+	DBGENTER(1);
+	DBGLEAVE(1);
+	return 0;
+}
+
+static void apollon_panel_cleanup(void)
+{
+	DBGENTER(1);
+	DBGLEAVE(1);
+}
+
+static int apollon_panel_enable(void)
+{
+
+	DBGENTER(1);
+
+	/* configure LCD PWR_EN */
+	omap_cfg_reg(M21_242X_GPIO11);
+
+	DBGLEAVE(1);
+	return 0;
+}
+
+static void apollon_panel_disable(void)
+{
+	DBGENTER(1);
+	DBGLEAVE(1);
+}
+
+static unsigned long apollon_panel_get_caps(void)
+{
+	return 0;
+}
+
+struct lcd_panel apollon_panel = {
+	.name		= "apollon",
+	.config		= OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
+			  OMAP_LCDC_INV_HSYNC,
+
+	.bpp		= 16,
+	.data_lines	= 18,
+#ifdef USE_35INCH_LCD
+	.x_res		= 240,
+	.y_res		= 320,
+	.hsw		= 2,
+	.hfp		= 3,
+	.hbp		= 9,
+	.vsw		= 4,
+	.vfp		= 3,
+	.vbp		= 5,
+#else
+	.x_res		= 480,
+	.y_res		= 272,
+	.hsw		= 41,
+	.hfp		= 2,
+	.hbp		= 2,
+	.vsw		= 10,
+	.vfp		= 2,
+	.vbp		= 2,
+#endif
+	.pixel_clock	= 6250,
+
+	.init		= apollon_panel_init,
+	.cleanup	= apollon_panel_cleanup,
+	.enable		= apollon_panel_enable,
+	.disable	= apollon_panel_disable,
+	.get_caps	= apollon_panel_get_caps,
+};

drivers/video/omap/omapfb_main.c

@@ -89,6 +89,7 @@ extern struct lcd_panel palmte_panel;
 extern struct lcd_panel innovator1610_panel;
 extern struct lcd_panel innovator1510_panel;
 extern struct lcd_panel lph8923_panel;
+extern struct lcd_panel apollon_panel;
 
 static struct lcd_panel *panels[] = {
 #ifdef CONFIG_MACH_OMAP_H2
@@ -119,6 +120,9 @@ static struct lcd_panel *panels[] = {
 	&innovator1610_panel,
 #endif
 
+#endif
+#ifdef CONFIG_MACH_OMAP_APOLLON
+	&apollon_panel,
 #endif
 };
 

include/asm-arm/arch-omap/board-apollon.h

+/*
+ * linux/include/asm-arm/arch-omap/board-apollon.h
+ *
+ * Hardware definitions for Samsung OMAP24XX Apollon board.
+ *
+ * Initial creation by Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_APOLLON_H
+#define __ASM_ARCH_OMAP_APOLLON_H
+
+/* Placeholder for APOLLON specific defines */
+/* GPMC CS0 */
+#define APOLLON_CS0_BASE		0x00000000
+/* GPMC CS1 */
+#define APOLLON_CS1_BASE		0x08000000
+#define APOLLON_ETHR_START		(APOLLON_CS1_BASE + 0x300)
+#define APOLLON_ETHR_GPIO_IRQ		74
+/* GPMC CS2 - reserved for OneNAND */
+#define APOLLON_CS2_BASE		0x10000000
+/* GPMC CS3 - reserved for NOR or NAND */
+#define APOLLON_CS3_BASE		0x18000000
+
+#endif /*  __ASM_ARCH_OMAP_APOLLON_H */
+

include/asm-arm/arch-omap/hardware.h

@@ -306,6 +306,10 @@
 #include "board-h4.h"
 #endif
 
+#ifdef CONFIG_MACH_OMAP_APOLLON
+#include "board-apollon.h"
+#endif
+
 #ifdef CONFIG_MACH_OMAP_OSK
 #include "board-osk.h"
 #endif

include/asm-arm/arch-omap/mux.h

@@ -417,7 +417,15 @@ enum omap24xx_index {
 	V15_24XX_MCBSP2_DX,
 
 	/* 24xx GPIO */
+	M21_242X_GPIO11,
+	AA10_242X_GPIO13,
+	AA6_242X_GPIO14,
+	AA4_242X_GPIO15,
+	Y11_242X_GPIO16,
+	AA12_242X_GPIO17,
+	AA8_242X_GPIO58,
 	Y20_24XX_GPIO60,
+	W4__24XX_GPIO74,
 	M15_24XX_GPIO92,
 	V14_24XX_GPIO117,
 

include/asm/arch/board-apollon.h

+/*
+ * linux/include/asm-arm/arch-omap/board-apollon.h
+ *
+ * Hardware definitions for Samsung OMAP24XX Apollon board.
+ *
+ * Initial creation by Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_APOLLON_H
+#define __ASM_ARCH_OMAP_APOLLON_H
+
+/* Placeholder for APOLLON specific defines */
+/* GPMC CS0 */
+#define APOLLON_CS0_BASE		0x00000000
+/* GPMC CS1 */
+#define APOLLON_CS1_BASE		0x08000000
+#define APOLLON_ETHR_START		(APOLLON_CS1_BASE + 0x300)
+#define APOLLON_ETHR_GPIO_IRQ		74
+/* GPMC CS2 - reserved for OneNAND */
+#define APOLLON_CS2_BASE		0x10000000
+/* GPMC CS3 - reserved for NOR or NAND */
+#define APOLLON_CS3_BASE		0x18000000
+
+#endif /*  __ASM_ARCH_OMAP_APOLLON_H */
+

sound/oss/Kconfig

@@ -13,7 +13,7 @@ config SOUND_OMAP
 
 config SOUND_OMAP_TSC2101
 	tristate "TSC2101 Stereo Codec"
-	depends on SOUND_OMAP && ( MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4)
+	depends on SOUND_OMAP && ( MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4 || MACH_OMAP_APOLLON)
 	select OMAP_TSC2101 if ( MACH_OMAP_H2 || MACH_OMAP_H3 )
 	select OMAP_UWIRE if ARCH_OMAP1
 	---help---

sound/oss/omap-audio-tsc2101.c

@@ -244,7 +244,7 @@ static struct omap_mcbsp_reg_cfg initial_config = {
 	/* platform specific initialization */
 #ifdef CONFIG_MACH_OMAP_H2
 	.pcr0  = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
-#elif defined(CONFIG_MACH_OMAP_H3) || defined(CONFIG_MACH_OMAP_H4)
+#elif defined(CONFIG_MACH_OMAP_H3) || defined(CONFIG_MACH_OMAP_H4) || defined(CONFIG_MACH_OMAP_APOLLON)
 
 #ifndef TSC_MASTER
 	.pcr0  = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,