Commit 2625b10d authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (25 commits)
  atmel-mci: add MCI2 register definitions
  atmel-mci: Integrate AT91 specific definition in header file
  tmio_mmc: allow compilation for ASIC3
  mmc_block: do not DMA to stack
  sdhci: Print ADMA status and pointer on debug
  tmio_mmc: fix clock setup
  tmio_mmc: map SD control registers after enabling the MFD cell
  tmio_mmc: correct probe return value for num_resources != 3
  tmio_mmc: don't use set_irq_type
  tmio_mmc: add bus_shift support
  MFD,mmc: tmio_mmc: make HCLK configurable
  mmc_spi: don't use EINVAL for possible transmission errors
  cb710: more cleanup for the DEBUG case.
  sdhci: platform driver for SDHCI
  mxcmmc: remove frequency workaround
  cb710: handle DEBUG define in Makefile
  cb710: add missing parenthesis
  cb710: fix printk format string
  mmc: Driver for CB710/720 memory card reader (MMC part)
  pxamci: add regulator support.
  ...
parents 489f7ab6 7f72134c
...@@ -2112,6 +2112,15 @@ W: http://sourceforge.net/projects/lpfcxxxx ...@@ -2112,6 +2112,15 @@ W: http://sourceforge.net/projects/lpfcxxxx
S: Supported S: Supported
F: drivers/scsi/lpfc/ F: drivers/scsi/lpfc/
ENE CB710 FLASH CARD READER DRIVER
P: Michał Mirosław
M: mirq-linux@rere.qmqm.pl
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/misc/cb710/
F: drivers/mmc/host/cb710-mmc.*
F: include/linux/cb710.h
EPSON 1355 FRAMEBUFFER DRIVER EPSON 1355 FRAMEBUFFER DRIVER
P: Christopher Hoover P: Christopher Hoover
M: ch@murgatroid.com M: ch@murgatroid.com
......
...@@ -108,6 +108,10 @@ static int t7l66xb_mmc_disable(struct platform_device *mmc) ...@@ -108,6 +108,10 @@ static int t7l66xb_mmc_disable(struct platform_device *mmc)
/*--------------------------------------------------------------------------*/ /*--------------------------------------------------------------------------*/
static const struct tmio_mmc_data t7166xb_mmc_data = {
.hclk = 24000000,
};
static const struct resource t7l66xb_mmc_resources[] = { static const struct resource t7l66xb_mmc_resources[] = {
{ {
.start = 0x800, .start = 0x800,
...@@ -149,6 +153,7 @@ static struct mfd_cell t7l66xb_cells[] = { ...@@ -149,6 +153,7 @@ static struct mfd_cell t7l66xb_cells[] = {
.name = "tmio-mmc", .name = "tmio-mmc",
.enable = t7l66xb_mmc_enable, .enable = t7l66xb_mmc_enable,
.disable = t7l66xb_mmc_disable, .disable = t7l66xb_mmc_disable,
.driver_data = &t7166xb_mmc_data,
.num_resources = ARRAY_SIZE(t7l66xb_mmc_resources), .num_resources = ARRAY_SIZE(t7l66xb_mmc_resources),
.resources = t7l66xb_mmc_resources, .resources = t7l66xb_mmc_resources,
}, },
......
...@@ -75,6 +75,10 @@ static int tc6387xb_mmc_disable(struct platform_device *mmc) ...@@ -75,6 +75,10 @@ static int tc6387xb_mmc_disable(struct platform_device *mmc)
/*--------------------------------------------------------------------------*/ /*--------------------------------------------------------------------------*/
const static struct tmio_mmc_data tc6387xb_mmc_data = {
.hclk = 24000000,
};
static struct resource tc6387xb_mmc_resources[] = { static struct resource tc6387xb_mmc_resources[] = {
{ {
.start = 0x800, .start = 0x800,
...@@ -98,6 +102,7 @@ static struct mfd_cell tc6387xb_cells[] = { ...@@ -98,6 +102,7 @@ static struct mfd_cell tc6387xb_cells[] = {
.name = "tmio-mmc", .name = "tmio-mmc",
.enable = tc6387xb_mmc_enable, .enable = tc6387xb_mmc_enable,
.disable = tc6387xb_mmc_disable, .disable = tc6387xb_mmc_disable,
.driver_data = &tc6387xb_mmc_data,
.num_resources = ARRAY_SIZE(tc6387xb_mmc_resources), .num_resources = ARRAY_SIZE(tc6387xb_mmc_resources),
.resources = tc6387xb_mmc_resources, .resources = tc6387xb_mmc_resources,
}, },
......
...@@ -136,6 +136,10 @@ static int tc6393xb_nand_enable(struct platform_device *nand) ...@@ -136,6 +136,10 @@ static int tc6393xb_nand_enable(struct platform_device *nand)
return 0; return 0;
} }
const static struct tmio_mmc_data tc6393xb_mmc_data = {
.hclk = 24000000,
};
static struct resource __devinitdata tc6393xb_nand_resources[] = { static struct resource __devinitdata tc6393xb_nand_resources[] = {
{ {
.start = 0x1000, .start = 0x1000,
...@@ -351,6 +355,7 @@ static struct mfd_cell __devinitdata tc6393xb_cells[] = { ...@@ -351,6 +355,7 @@ static struct mfd_cell __devinitdata tc6393xb_cells[] = {
}, },
[TC6393XB_CELL_MMC] = { [TC6393XB_CELL_MMC] = {
.name = "tmio-mmc", .name = "tmio-mmc",
.driver_data = &tc6393xb_mmc_data,
.num_resources = ARRAY_SIZE(tc6393xb_mmc_resources), .num_resources = ARRAY_SIZE(tc6393xb_mmc_resources),
.resources = tc6393xb_mmc_resources, .resources = tc6393xb_mmc_resources,
}, },
......
...@@ -235,5 +235,6 @@ config ISL29003 ...@@ -235,5 +235,6 @@ config ISL29003
source "drivers/misc/c2port/Kconfig" source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig" source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
endif # MISC_DEVICES endif # MISC_DEVICES
...@@ -21,3 +21,4 @@ obj-$(CONFIG_HP_ILO) += hpilo.o ...@@ -21,3 +21,4 @@ obj-$(CONFIG_HP_ILO) += hpilo.o
obj-$(CONFIG_ISL29003) += isl29003.o obj-$(CONFIG_ISL29003) += isl29003.o
obj-$(CONFIG_C2PORT) += c2port/ obj-$(CONFIG_C2PORT) += c2port/
obj-y += eeprom/ obj-y += eeprom/
obj-y += cb710/
config CB710_CORE
tristate "ENE CB710/720 Flash memory card reader support"
depends on PCI
help
This option enables support for PCI ENE CB710/720 Flash memory card
reader found in some laptops (ie. some versions of HP Compaq nx9500).
You will also have to select some flash card format drivers (MMC/SD,
MemoryStick).
This driver can also be built as a module. If so, the module
will be called cb710.
config CB710_DEBUG
bool "Enable driver debugging"
depends on CB710_CORE != n
default n
help
This is an option for use by developers; most people should
say N here. This adds a lot of debugging output to dmesg.
config CB710_DEBUG_ASSUMPTIONS
bool
depends on CB710_CORE != n
default y
ifeq ($(CONFIG_CB710_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
endif
obj-$(CONFIG_CB710_CORE) += cb710.o
cb710-y := core.o sgbuf2.o
cb710-$(CONFIG_CB710_DEBUG) += debug.o
/*
* cb710/core.c
*
* Copyright by Michał Mirosław, 2008-2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/idr.h>
#include <linux/cb710.h>
static DEFINE_IDA(cb710_ida);
static DEFINE_SPINLOCK(cb710_ida_lock);
void cb710_pci_update_config_reg(struct pci_dev *pdev,
int reg, uint32_t mask, uint32_t xor)
{
u32 rval;
pci_read_config_dword(pdev, reg, &rval);
rval = (rval & mask) ^ xor;
pci_write_config_dword(pdev, reg, rval);
}
EXPORT_SYMBOL_GPL(cb710_pci_update_config_reg);
/* Some magic writes based on Windows driver init code */
static int __devinit cb710_pci_configure(struct pci_dev *pdev)
{
unsigned int devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
struct pci_dev *pdev0 = pci_get_slot(pdev->bus, devfn);
u32 val;
cb710_pci_update_config_reg(pdev, 0x48,
~0x000000FF, 0x0000003F);
pci_read_config_dword(pdev, 0x48, &val);
if (val & 0x80000000)
return 0;
if (!pdev0)
return -ENODEV;
if (pdev0->vendor == PCI_VENDOR_ID_ENE
&& pdev0->device == PCI_DEVICE_ID_ENE_720) {
cb710_pci_update_config_reg(pdev0, 0x8C,
~0x00F00000, 0x00100000);
cb710_pci_update_config_reg(pdev0, 0xB0,
~0x08000000, 0x08000000);
}
cb710_pci_update_config_reg(pdev0, 0x8C,
~0x00000F00, 0x00000200);
cb710_pci_update_config_reg(pdev0, 0x90,
~0x00060000, 0x00040000);
pci_dev_put(pdev0);
return 0;
}
static irqreturn_t cb710_irq_handler(int irq, void *data)
{
struct cb710_chip *chip = data;
struct cb710_slot *slot = &chip->slot[0];
irqreturn_t handled = IRQ_NONE;
unsigned nr;
spin_lock(&chip->irq_lock); /* incl. smp_rmb() */
for (nr = chip->slots; nr; ++slot, --nr) {
cb710_irq_handler_t handler_func = slot->irq_handler;
if (handler_func && handler_func(slot))
handled = IRQ_HANDLED;
}
spin_unlock(&chip->irq_lock);
return handled;
}
static void cb710_release_slot(struct device *dev)
{
#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
struct cb710_slot *slot = cb710_pdev_to_slot(to_platform_device(dev));
struct cb710_chip *chip = cb710_slot_to_chip(slot);
/* slot struct can be freed now */
atomic_dec(&chip->slot_refs_count);
#endif
}
static int __devinit cb710_register_slot(struct cb710_chip *chip,
unsigned slot_mask, unsigned io_offset, const char *name)
{
int nr = chip->slots;
struct cb710_slot *slot = &chip->slot[nr];
int err;
dev_dbg(cb710_chip_dev(chip),
"register: %s.%d; slot %d; mask %d; IO offset: 0x%02X\n",
name, chip->platform_id, nr, slot_mask, io_offset);
/* slot->irq_handler == NULL here; this needs to be
* seen before platform_device_register() */
++chip->slots;
smp_wmb();
slot->iobase = chip->iobase + io_offset;
slot->pdev.name = name;
slot->pdev.id = chip->platform_id;
slot->pdev.dev.parent = &chip->pdev->dev;
slot->pdev.dev.release = cb710_release_slot;
err = platform_device_register(&slot->pdev);
#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
atomic_inc(&chip->slot_refs_count);
#endif
if (err) {
/* device_initialize() called from platform_device_register()
* wants this on error path */
platform_device_put(&slot->pdev);
/* slot->irq_handler == NULL here anyway, so no lock needed */
--chip->slots;
return err;
}
chip->slot_mask |= slot_mask;
return 0;
}
static void cb710_unregister_slot(struct cb710_chip *chip,
unsigned slot_mask)
{
int nr = chip->slots - 1;
if (!(chip->slot_mask & slot_mask))
return;
platform_device_unregister(&chip->slot[nr].pdev);
/* complementary to spin_unlock() in cb710_set_irq_handler() */
smp_rmb();
BUG_ON(chip->slot[nr].irq_handler != NULL);
/* slot->irq_handler == NULL here, so no lock needed */
--chip->slots;
chip->slot_mask &= ~slot_mask;
}
void cb710_set_irq_handler(struct cb710_slot *slot,
cb710_irq_handler_t handler)
{
struct cb710_chip *chip = cb710_slot_to_chip(slot);
unsigned long flags;
spin_lock_irqsave(&chip->irq_lock, flags);
slot->irq_handler = handler;
spin_unlock_irqrestore(&chip->irq_lock, flags);
}
EXPORT_SYMBOL_GPL(cb710_set_irq_handler);
#ifdef CONFIG_PM
static int cb710_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct cb710_chip *chip = pci_get_drvdata(pdev);
free_irq(pdev->irq, chip);
pci_save_state(pdev);
pci_disable_device(pdev);
if (state.event & PM_EVENT_SLEEP)
pci_set_power_state(pdev, PCI_D3cold);
return 0;
}
static int cb710_resume(struct pci_dev *pdev)
{
struct cb710_chip *chip = pci_get_drvdata(pdev);
int err;
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
err = pcim_enable_device(pdev);
if (err)
return err;
return devm_request_irq(&pdev->dev, pdev->irq,
cb710_irq_handler, IRQF_SHARED, KBUILD_MODNAME, chip);
}
#endif /* CONFIG_PM */
static int __devinit cb710_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct cb710_chip *chip;
unsigned long flags;
u32 val;
int err;
int n = 0;
err = cb710_pci_configure(pdev);
if (err)
return err;
/* this is actually magic... */
pci_read_config_dword(pdev, 0x48, &val);
if (!(val & 0x80000000)) {
pci_write_config_dword(pdev, 0x48, val|0x71000000);
pci_read_config_dword(pdev, 0x48, &val);
}
dev_dbg(&pdev->dev, "PCI config[0x48] = 0x%08X\n", val);
if (!(val & 0x70000000))
return -ENODEV;
val = (val >> 28) & 7;
if (val & CB710_SLOT_MMC)
++n;
if (val & CB710_SLOT_MS)
++n;
if (val & CB710_SLOT_SM)
++n;
chip = devm_kzalloc(&pdev->dev,
sizeof(*chip) + n * sizeof(*chip->slot), GFP_KERNEL);
if (!chip)
return -ENOMEM;
err = pcim_enable_device(pdev);
if (err)
return err;
err = pcim_iomap_regions(pdev, 0x0001, KBUILD_MODNAME);
if (err)
return err;
chip->pdev = pdev;
chip->iobase = pcim_iomap_table(pdev)[0];
pci_set_drvdata(pdev, chip);
err = devm_request_irq(&pdev->dev, pdev->irq,
cb710_irq_handler, IRQF_SHARED, KBUILD_MODNAME, chip);
if (err)
return err;
do {
if (!ida_pre_get(&cb710_ida, GFP_KERNEL))
return -ENOMEM;
spin_lock_irqsave(&cb710_ida_lock, flags);
err = ida_get_new(&cb710_ida, &chip->platform_id);
spin_unlock_irqrestore(&cb710_ida_lock, flags);
if (err && err != -EAGAIN)
return err;
} while (err);
dev_info(&pdev->dev, "id %d, IO 0x%p, IRQ %d\n",
chip->platform_id, chip->iobase, pdev->irq);
if (val & CB710_SLOT_MMC) { /* MMC/SD slot */
err = cb710_register_slot(chip,
CB710_SLOT_MMC, 0x00, "cb710-mmc");
if (err)
return err;
}
if (val & CB710_SLOT_MS) { /* MemoryStick slot */
err = cb710_register_slot(chip,
CB710_SLOT_MS, 0x40, "cb710-ms");
if (err)
goto unreg_mmc;
}
if (val & CB710_SLOT_SM) { /* SmartMedia slot */
err = cb710_register_slot(chip,
CB710_SLOT_SM, 0x60, "cb710-sm");
if (err)
goto unreg_ms;
}
return 0;
unreg_ms:
cb710_unregister_slot(chip, CB710_SLOT_MS);
unreg_mmc:
cb710_unregister_slot(chip, CB710_SLOT_MMC);
#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
BUG_ON(atomic_read(&chip->slot_refs_count) != 0);
#endif
return err;
}
static void __devexit cb710_remove_one(struct pci_dev *pdev)
{
struct cb710_chip *chip = pci_get_drvdata(pdev);
unsigned long flags;
cb710_unregister_slot(chip, CB710_SLOT_SM);
cb710_unregister_slot(chip, CB710_SLOT_MS);
cb710_unregister_slot(chip, CB710_SLOT_MMC);
#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
BUG_ON(atomic_read(&chip->slot_refs_count) != 0);
#endif
spin_lock_irqsave(&cb710_ida_lock, flags);
ida_remove(&cb710_ida, chip->platform_id);
spin_unlock_irqrestore(&cb710_ida_lock, flags);
}
static const struct pci_device_id cb710_pci_tbl[] = {
{ PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_CB710_FLASH,
PCI_ANY_ID, PCI_ANY_ID, },
{ 0, }
};
static struct pci_driver cb710_driver = {
.name = KBUILD_MODNAME,
.id_table = cb710_pci_tbl,
.probe = cb710_probe,
.remove = __devexit_p(cb710_remove_one),
#ifdef CONFIG_PM
.suspend = cb710_suspend,
.resume = cb710_resume,
#endif
};
static int __init cb710_init_module(void)
{
return pci_register_driver(&cb710_driver);
}
static void __exit cb710_cleanup_module(void)
{
pci_unregister_driver(&cb710_driver);
ida_destroy(&cb710_ida);
}
module_init(cb710_init_module);
module_exit(cb710_cleanup_module);
MODULE_AUTHOR("Michał Mirosław <mirq-linux@rere.qmqm.pl>");
MODULE_DESCRIPTION("ENE CB710 memory card reader driver");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, cb710_pci_tbl);
/*
* cb710/debug.c
*
* Copyright by Michał Mirosław, 2008-2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/cb710.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#define CB710_REG_COUNT 0x80
static const u16 allow[CB710_REG_COUNT/16] = {
0xFFF0, 0xFFFF, 0xFFFF, 0xFFFF,
0xFFF0, 0xFFFF, 0xFFFF, 0xFFFF,
};
static const char *const prefix[ARRAY_SIZE(allow)] = {
"MMC", "MMC", "MMC", "MMC",
"MS?", "MS?", "SM?", "SM?"
};
static inline int allow_reg_read(unsigned block, unsigned offset, unsigned bits)
{
unsigned mask = (1 << bits/8) - 1;
offset *= bits/8;
return ((allow[block] >> offset) & mask) == mask;
}
#define CB710_READ_REGS_TEMPLATE(t) \
static void cb710_read_regs_##t(void __iomem *iobase, \
u##t *reg, unsigned select) \
{ \
unsigned i, j; \
\
for (i = 0; i < ARRAY_SIZE(allow); ++i, reg += 16/(t/8)) { \
if (!(select & (1 << i))) \
continue; \
\
for (j = 0; j < 0x10/(t/8); ++j) { \
if (!allow_reg_read(i, j, t)) \
continue; \
reg[j] = ioread##t(iobase \
+ (i << 4) + (j * (t/8))); \
} \
} \
}
static const char cb710_regf_8[] = "%02X";
static const char cb710_regf_16[] = "%04X";
static const char cb710_regf_32[] = "%08X";
static const char cb710_xes[] = "xxxxxxxx";
#define CB710_DUMP_REGS_TEMPLATE(t) \
static void cb710_dump_regs_##t(struct device *dev, \
const u##t *reg, unsigned select) \
{ \
const char *const xp = &cb710_xes[8 - t/4]; \
const char *const format = cb710_regf_##t; \
\
char msg[100], *p; \
unsigned i, j; \
\
for (i = 0; i < ARRAY_SIZE(allow); ++i, reg += 16/(t/8)) { \
if (!(select & (1 << i))) \
continue; \
p = msg; \
for (j = 0; j < 0x10/(t/8); ++j) { \
*p++ = ' '; \
if (j == 8/(t/8)) \
*p++ = ' '; \
if (allow_reg_read(i, j, t)) \
p += sprintf(p, format, reg[j]); \
else \
p += sprintf(p, "%s", xp); \
} \
dev_dbg(dev, "%s 0x%02X %s\n", prefix[i], i << 4, msg); \
} \
}
#define CB710_READ_AND_DUMP_REGS_TEMPLATE(t) \
static void cb710_read_and_dump_regs_##t(struct cb710_chip *chip, \
unsigned select) \
{ \
u##t regs[CB710_REG_COUNT/sizeof(u##t)]; \
\
memset(&regs, 0, sizeof(regs)); \
cb710_read_regs_##t(chip->iobase, regs, select); \
cb710_dump_regs_##t(cb710_chip_dev(chip), regs, select); \
}
#define CB710_REG_ACCESS_TEMPLATES(t) \
CB710_READ_REGS_TEMPLATE(t) \
CB710_DUMP_REGS_TEMPLATE(t) \
CB710_READ_AND_DUMP_REGS_TEMPLATE(t)
CB710_REG_ACCESS_TEMPLATES(8)
CB710_REG_ACCESS_TEMPLATES(16)
CB710_REG_ACCESS_TEMPLATES(32)
void cb710_dump_regs(struct cb710_chip *chip, unsigned select)
{
if (!(select & CB710_DUMP_REGS_MASK))
select = CB710_DUMP_REGS_ALL;
if (!(select & CB710_DUMP_ACCESS_MASK))
select |= CB710_DUMP_ACCESS_8;
if (select & CB710_DUMP_ACCESS_32)
cb710_read_and_dump_regs_32(chip, select);
if (select & CB710_DUMP_ACCESS_16)
cb710_read_and_dump_regs_16(chip, select);
if (select & CB710_DUMP_ACCESS_8)
cb710_read_and_dump_regs_8(chip, select);
}
EXPORT_SYMBOL_GPL(cb710_dump_regs);
/*
* cb710/sgbuf2.c
*
* Copyright by Michał Mirosław, 2008-2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/cb710.h>
static bool sg_dwiter_next(struct sg_mapping_iter *miter)
{
if (sg_miter_next(miter)) {
miter->consumed = 0;
return true;
} else
return false;
}
static bool sg_dwiter_is_at_end(struct sg_mapping_iter *miter)
{
return miter->length == miter->consumed && !sg_dwiter_next(miter);
}
static uint32_t sg_dwiter_read_buffer(struct sg_mapping_iter *miter)
{
size_t len, left = 4;
uint32_t data;
void *addr = &data;
do {
len = min(miter->length - miter->consumed, left);
memcpy(addr, miter->addr + miter->consumed, len);
miter->consumed += len;
left -= len;
if (!left)
return data;
addr += len;
} while (sg_dwiter_next(miter));
memset(addr, 0, left);
return data;
}
static inline bool needs_unaligned_copy(const void *ptr)
{
#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
return false;
#else
return ((ptr - NULL) & 3) != 0;
#endif
}
static bool sg_dwiter_get_next_block(struct sg_mapping_iter *miter, uint32_t **ptr)
{
size_t len;
if (sg_dwiter_is_at_end(miter))
return true;
len = miter->length - miter->consumed;
if (likely(len >= 4 && !needs_unaligned_copy(
miter->addr + miter->consumed))) {
*ptr = miter->addr + miter->consumed;
miter->consumed += 4;
return true;
}
return false;
}
/**
* cb710_sg_dwiter_read_next_block() - get next 32-bit word from sg buffer
* @miter: sg mapping iterator used for reading
*
* Description:
* Returns 32-bit word starting at byte pointed to by @miter@
* handling any alignment issues. Bytes past the buffer's end
* are not accessed (read) but are returned as zeroes. @miter@
* is advanced by 4 bytes or to the end of buffer whichever is
* closer.
*
* Context:
* Same requirements as in sg_miter_next().
*
* Returns:
* 32-bit word just read.
*/
uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter)
{
uint32_t *ptr = NULL;
if (likely(sg_dwiter_get_next_block(miter, &ptr)))
return ptr ? *ptr : 0;
return sg_dwiter_read_buffer(miter);
}
EXPORT_SYMBOL_GPL(cb710_sg_dwiter_read_next_block);
static void sg_dwiter_write_slow(struct sg_mapping_iter *miter, uint32_t data)
{
size_t len, left = 4;
void *addr = &data;
do {
len = min(miter->length - miter->consumed, left);
memcpy(miter->addr, addr, len);
miter->consumed += len;
left -= len;
if (!left)
return;
addr += len;
flush_kernel_dcache_page(miter->page);
} while (sg_dwiter_next(miter));
}
/**
* cb710_sg_dwiter_write_next_block() - write next 32-bit word to sg buffer
* @miter: sg mapping iterator used for writing
*
* Description:
* Writes 32-bit word starting at byte pointed to by @miter@
* handling any alignment issues. Bytes which would be written
* past the buffer's end are silently discarded. @miter@ is
* advanced by 4 bytes or to the end of buffer whichever is closer.
*
* Context:
* Same requirements as in sg_miter_next().
*/
void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data)
{
uint32_t *ptr = NULL;
if (likely(sg_dwiter_get_next_block(miter, &ptr))) {
if (ptr)
*ptr = data;
else
return;
} else
sg_dwiter_write_slow(miter, data);
if (miter->length == miter->consumed)
flush_kernel_dcache_page(miter->page);
}
EXPORT_SYMBOL_GPL(cb710_sg_dwiter_write_next_block);
...@@ -147,7 +147,8 @@ struct mmc_blk_request { ...@@ -147,7 +147,8 @@ struct mmc_blk_request {
static u32 mmc_sd_num_wr_blocks(struct mmc_card *card) static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
{ {
int err; int err;
__be32 blocks; u32 result;
__be32 *blocks;
struct mmc_request mrq; struct mmc_request mrq;
struct mmc_command cmd; struct mmc_command cmd;
...@@ -199,14 +200,21 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card) ...@@ -199,14 +200,21 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
mrq.cmd = &cmd; mrq.cmd = &cmd;
mrq.data = &data; mrq.data = &data;
sg_init_one(&sg, &blocks, 4); blocks = kmalloc(4, GFP_KERNEL);
if (!blocks)
return (u32)-1;
sg_init_one(&sg, blocks, 4);
mmc_wait_for_req(card->host, &mrq); mmc_wait_for_req(card->host, &mrq);
result = ntohl(*blocks);
kfree(blocks);
if (cmd.error || data.error) if (cmd.error || data.error)
return (u32)-1; result = (u32)-1;
return ntohl(blocks); return result;
} }
static u32 get_card_status(struct mmc_card *card, struct request *req) static u32 get_card_status(struct mmc_card *card, struct request *req)
......
...@@ -708,7 +708,13 @@ static void mmc_power_up(struct mmc_host *host) ...@@ -708,7 +708,13 @@ static void mmc_power_up(struct mmc_host *host)
*/ */
mmc_delay(10); mmc_delay(10);
if (host->f_min > 400000) {
pr_warning("%s: Minimum clock frequency too high for "
"identification mode\n", mmc_hostname(host));
host->ios.clock = host->f_min; host->ios.clock = host->f_min;
} else
host->ios.clock = 400000;
host->ios.power_mode = MMC_POWER_ON; host->ios.power_mode = MMC_POWER_ON;
mmc_set_ios(host); mmc_set_ios(host);
...@@ -855,7 +861,23 @@ void mmc_rescan(struct work_struct *work) ...@@ -855,7 +861,23 @@ void mmc_rescan(struct work_struct *work)
mmc_bus_get(host); mmc_bus_get(host);
if (host->bus_ops == NULL) { /* if there is a card registered, check whether it is still present */
if ((host->bus_ops != NULL) && host->bus_ops->detect && !host->bus_dead)
host->bus_ops->detect(host);
mmc_bus_put(host);
mmc_bus_get(host);
/* if there still is a card present, stop here */
if (host->bus_ops != NULL) {
mmc_bus_put(host);
goto out;
}
/* detect a newly inserted card */
/* /*
* Only we can add a new handler, so it's safe to * Only we can add a new handler, so it's safe to
* release the lock here. * release the lock here.
...@@ -904,12 +926,7 @@ void mmc_rescan(struct work_struct *work) ...@@ -904,12 +926,7 @@ void mmc_rescan(struct work_struct *work)
mmc_release_host(host); mmc_release_host(host);
mmc_power_off(host); mmc_power_off(host);
} else {
if (host->bus_ops->detect && !host->bus_dead)
host->bus_ops->detect(host);
mmc_bus_put(host);
}
out: out:
if (host->caps & MMC_CAP_NEEDS_POLL) if (host->caps & MMC_CAP_NEEDS_POLL)
mmc_schedule_delayed_work(&host->detect, HZ); mmc_schedule_delayed_work(&host->detect, HZ);
......
...@@ -83,6 +83,17 @@ config MMC_SDHCI_OF ...@@ -83,6 +83,17 @@ config MMC_SDHCI_OF
If unsure, say N. If unsure, say N.
config MMC_SDHCI_PLTFM
tristate "SDHCI support on the platform specific bus"
depends on MMC_SDHCI
help
This selects the platform specific bus support for Secure Digital Host
Controller Interface.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config MMC_OMAP config MMC_OMAP
tristate "TI OMAP Multimedia Card Interface support" tristate "TI OMAP Multimedia Card Interface support"
depends on ARCH_OMAP depends on ARCH_OMAP
...@@ -237,7 +248,20 @@ config MMC_SDRICOH_CS ...@@ -237,7 +248,20 @@ config MMC_SDRICOH_CS
config MMC_TMIO config MMC_TMIO
tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support" tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
depends on MFD_TMIO depends on MFD_TMIO || MFD_ASIC3
help help
This provides support for the SD/MMC cell found in TC6393XB, This provides support for the SD/MMC cell found in TC6393XB,
T7L66XB and also ipaq ASIC3 T7L66XB and also HTC ASIC3
config MMC_CB710
tristate "ENE CB710 MMC/SD Interface support"
depends on PCI
select CB710_CORE
help
This option enables support for MMC/SD part of ENE CB710/720 Flash
memory card reader found in some laptops (ie. some versions of
HP Compaq nx9500).
This driver can also be built as a module. If so, the module
will be called cb710-mmc.
...@@ -14,6 +14,7 @@ obj-$(CONFIG_MMC_SDHCI) += sdhci.o ...@@ -14,6 +14,7 @@ obj-$(CONFIG_MMC_SDHCI) += sdhci.o
obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o
obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o
obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
obj-$(CONFIG_MMC_OMAP) += omap.o obj-$(CONFIG_MMC_OMAP) += omap.o
...@@ -29,4 +30,8 @@ endif ...@@ -29,4 +30,8 @@ endif
obj-$(CONFIG_MMC_S3C) += s3cmci.o obj-$(CONFIG_MMC_S3C) += s3cmci.o
obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o
obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o
obj-$(CONFIG_MMC_CB710) += cb710-mmc.o
ifeq ($(CONFIG_CB710_DEBUG),y)
CFLAGS-cb710-mmc += -DDEBUG
endif
...@@ -7,6 +7,12 @@ ...@@ -7,6 +7,12 @@
* it under the terms of the GNU General Public License version 2 as * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation. * published by the Free Software Foundation.
*/ */
/*
* Superset of MCI IP registers integrated in Atmel AVR32 and AT91 Processors
* Registers and bitfields marked with [2] are only available in MCI2
*/
#ifndef __DRIVERS_MMC_ATMEL_MCI_H__ #ifndef __DRIVERS_MMC_ATMEL_MCI_H__
#define __DRIVERS_MMC_ATMEL_MCI_H__ #define __DRIVERS_MMC_ATMEL_MCI_H__
...@@ -14,11 +20,17 @@ ...@@ -14,11 +20,17 @@
#define MCI_CR 0x0000 /* Control */ #define MCI_CR 0x0000 /* Control */
# define MCI_CR_MCIEN ( 1 << 0) /* MCI Enable */ # define MCI_CR_MCIEN ( 1 << 0) /* MCI Enable */
# define MCI_CR_MCIDIS ( 1 << 1) /* MCI Disable */ # define MCI_CR_MCIDIS ( 1 << 1) /* MCI Disable */
# define MCI_CR_PWSEN ( 1 << 2) /* Power Save Enable */
# define MCI_CR_PWSDIS ( 1 << 3) /* Power Save Disable */
# define MCI_CR_SWRST ( 1 << 7) /* Software Reset */ # define MCI_CR_SWRST ( 1 << 7) /* Software Reset */
#define MCI_MR 0x0004 /* Mode */ #define MCI_MR 0x0004 /* Mode */
# define MCI_MR_CLKDIV(x) ((x) << 0) /* Clock Divider */ # define MCI_MR_CLKDIV(x) ((x) << 0) /* Clock Divider */
# define MCI_MR_PWSDIV(x) ((x) << 8) /* Power Saving Divider */
# define MCI_MR_RDPROOF ( 1 << 11) /* Read Proof */ # define MCI_MR_RDPROOF ( 1 << 11) /* Read Proof */
# define MCI_MR_WRPROOF ( 1 << 12) /* Write Proof */ # define MCI_MR_WRPROOF ( 1 << 12) /* Write Proof */
# define MCI_MR_PDCFBYTE ( 1 << 13) /* Force Byte Transfer */
# define MCI_MR_PDCPADV ( 1 << 14) /* Padding Value */
# define MCI_MR_PDCMODE ( 1 << 15) /* PDC-oriented Mode */
#define MCI_DTOR 0x0008 /* Data Timeout */ #define MCI_DTOR 0x0008 /* Data Timeout */
# define MCI_DTOCYC(x) ((x) << 0) /* Data Timeout Cycles */ # define MCI_DTOCYC(x) ((x) << 0) /* Data Timeout Cycles */
# define MCI_DTOMUL(x) ((x) << 4) /* Data Timeout Multiplier */ # define MCI_DTOMUL(x) ((x) << 4) /* Data Timeout Multiplier */
...@@ -28,6 +40,7 @@ ...@@ -28,6 +40,7 @@
# define MCI_SDCSEL_MASK ( 3 << 0) # define MCI_SDCSEL_MASK ( 3 << 0)
# define MCI_SDCBUS_1BIT ( 0 << 6) /* 1-bit data bus */ # define MCI_SDCBUS_1BIT ( 0 << 6) /* 1-bit data bus */
# define MCI_SDCBUS_4BIT ( 2 << 6) /* 4-bit data bus */ # define MCI_SDCBUS_4BIT ( 2 << 6) /* 4-bit data bus */
# define MCI_SDCBUS_8BIT ( 3 << 6) /* 8-bit data bus[2] */
# define MCI_SDCBUS_MASK ( 3 << 6) # define MCI_SDCBUS_MASK ( 3 << 6)
#define MCI_ARGR 0x0010 /* Command Argument */ #define MCI_ARGR 0x0010 /* Command Argument */
#define MCI_CMDR 0x0014 /* Command */ #define MCI_CMDR 0x0014 /* Command */
...@@ -56,6 +69,9 @@ ...@@ -56,6 +69,9 @@
#define MCI_BLKR 0x0018 /* Block */ #define MCI_BLKR 0x0018 /* Block */
# define MCI_BCNT(x) ((x) << 0) /* Data Block Count */ # define MCI_BCNT(x) ((x) << 0) /* Data Block Count */
# define MCI_BLKLEN(x) ((x) << 16) /* Data Block Length */ # define MCI_BLKLEN(x) ((x) << 16) /* Data Block Length */
#define MCI_CSTOR 0x001c /* Completion Signal Timeout[2] */
# define MCI_CSTOCYC(x) ((x) << 0) /* CST cycles */
# define MCI_CSTOMUL(x) ((x) << 4) /* CST multiplier */
#define MCI_RSPR 0x0020 /* Response 0 */ #define MCI_RSPR 0x0020 /* Response 0 */
#define MCI_RSPR1 0x0024 /* Response 1 */ #define MCI_RSPR1 0x0024 /* Response 1 */
#define MCI_RSPR2 0x0028 /* Response 2 */ #define MCI_RSPR2 0x0028 /* Response 2 */
...@@ -83,7 +99,24 @@ ...@@ -83,7 +99,24 @@
# define MCI_DTOE ( 1 << 22) /* Data Time-Out Error */ # define MCI_DTOE ( 1 << 22) /* Data Time-Out Error */
# define MCI_OVRE ( 1 << 30) /* RX Overrun Error */ # define MCI_OVRE ( 1 << 30) /* RX Overrun Error */
# define MCI_UNRE ( 1 << 31) /* TX Underrun Error */ # define MCI_UNRE ( 1 << 31) /* TX Underrun Error */
#define MCI_DMA 0x0050 /* DMA Configuration[2] */
# define MCI_DMA_OFFSET(x) ((x) << 0) /* DMA Write Buffer Offset */
# define MCI_DMA_CHKSIZE(x) ((x) << 4) /* DMA Channel Read and Write Chunk Size */
# define MCI_DMAEN ( 1 << 8) /* DMA Hardware Handshaking Enable */
#define MCI_CFG 0x0054 /* Configuration[2] */
# define MCI_CFG_FIFOMODE_1DATA ( 1 << 0) /* MCI Internal FIFO control mode */
# define MCI_CFG_FERRCTRL_COR ( 1 << 4) /* Flow Error flag reset control mode */
# define MCI_CFG_HSMODE ( 1 << 8) /* High Speed Mode */
# define MCI_CFG_LSYNC ( 1 << 12) /* Synchronize on the last block */
#define MCI_WPMR 0x00e4 /* Write Protection Mode[2] */
# define MCI_WP_EN ( 1 << 0) /* WP Enable */
# define MCI_WP_KEY (0x4d4349 << 8) /* WP Key */
#define MCI_WPSR 0x00e8 /* Write Protection Status[2] */
# define MCI_GET_WP_VS(x) ((x) & 0x0f)
# define MCI_GET_WP_VSRC(x) (((x) >> 8) & 0xffff)
#define MCI_FIFO_APERTURE 0x0200 /* FIFO Aperture[2] */
/* This is not including the FIFO Aperture on MCI2 */
#define MCI_REGS_SIZE 0x100 #define MCI_REGS_SIZE 0x100
/* Register access macros */ /* Register access macros */
......
This diff is collapsed.
/*
* cb710/cb710-mmc.h
*
* Copyright by Michał Mirosław, 2008-2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef LINUX_CB710_MMC_H
#define LINUX_CB710_MMC_H
#include <linux/cb710.h>
/* per-MMC-reader structure */
struct cb710_mmc_reader {
struct tasklet_struct finish_req_tasklet;
struct mmc_request *mrq;
spinlock_t irq_lock;
unsigned char last_power_mode;
};
/* some device struct walking */
static inline struct mmc_host *cb710_slot_to_mmc(struct cb710_slot *slot)
{
return dev_get_drvdata(&slot->pdev.dev);
}
static inline struct cb710_slot *cb710_mmc_to_slot(struct mmc_host *mmc)
{
struct platform_device *pdev = container_of(mmc_dev(mmc),
struct platform_device, dev);
return cb710_pdev_to_slot(pdev);
}
/* registers (this might be all wrong ;) */
#define CB710_MMC_DATA_PORT 0x00
#define CB710_MMC_CONFIG_PORT 0x04
#define CB710_MMC_CONFIG0_PORT 0x04
#define CB710_MMC_CONFIG1_PORT 0x05
#define CB710_MMC_C1_4BIT_DATA_BUS 0x40
#define CB710_MMC_CONFIG2_PORT 0x06
#define CB710_MMC_C2_READ_PIO_SIZE_MASK 0x0F /* N-1 */
#define CB710_MMC_CONFIG3_PORT 0x07
#define CB710_MMC_CONFIGB_PORT 0x08
#define CB710_MMC_IRQ_ENABLE_PORT 0x0C
#define CB710_MMC_IE_TEST_MASK 0x00BF
#define CB710_MMC_IE_CARD_INSERTION_STATUS 0x1000
#define CB710_MMC_IE_IRQ_ENABLE 0x8000
#define CB710_MMC_IE_CISTATUS_MASK \
(CB710_MMC_IE_CARD_INSERTION_STATUS|CB710_MMC_IE_IRQ_ENABLE)
#define CB710_MMC_STATUS_PORT 0x10
#define CB710_MMC_STATUS_ERROR_EVENTS 0x60FF
#define CB710_MMC_STATUS0_PORT 0x10
#define CB710_MMC_S0_FIFO_UNDERFLOW 0x40
#define CB710_MMC_STATUS1_PORT 0x11
#define CB710_MMC_S1_COMMAND_SENT 0x01
#define CB710_MMC_S1_DATA_TRANSFER_DONE 0x02
#define CB710_MMC_S1_PIO_TRANSFER_DONE 0x04
#define CB710_MMC_S1_CARD_CHANGED 0x10
#define CB710_MMC_S1_RESET 0x20
#define CB710_MMC_STATUS2_PORT 0x12
#define CB710_MMC_S2_FIFO_READY 0x01
#define CB710_MMC_S2_FIFO_EMPTY 0x02
#define CB710_MMC_S2_BUSY_10 0x10
#define CB710_MMC_S2_BUSY_20 0x20
#define CB710_MMC_STATUS3_PORT 0x13
#define CB710_MMC_S3_CARD_DETECTED 0x02
#define CB710_MMC_S3_WRITE_PROTECTED 0x04
#define CB710_MMC_CMD_TYPE_PORT 0x14
#define CB710_MMC_RSP_TYPE_MASK 0x0007
#define CB710_MMC_RSP_R1 (0)
#define CB710_MMC_RSP_136 (5)
#define CB710_MMC_RSP_NO_CRC (2)
#define CB710_MMC_RSP_PRESENT_MASK 0x0018
#define CB710_MMC_RSP_NONE (0 << 3)
#define CB710_MMC_RSP_PRESENT (1 << 3)
#define CB710_MMC_RSP_PRESENT_X (2 << 3)
#define CB710_MMC_CMD_TYPE_MASK 0x0060
#define CB710_MMC_CMD_BC (0 << 5)
#define CB710_MMC_CMD_BCR (1 << 5)
#define CB710_MMC_CMD_AC (2 << 5)
#define CB710_MMC_CMD_ADTC (3 << 5)
#define CB710_MMC_DATA_READ 0x0080
#define CB710_MMC_CMD_CODE_MASK 0x3F00
#define CB710_MMC_CMD_CODE_SHIFT 8
#define CB710_MMC_IS_APP_CMD 0x4000
#define CB710_MMC_RSP_BUSY 0x8000
#define CB710_MMC_CMD_PARAM_PORT 0x18
#define CB710_MMC_TRANSFER_SIZE_PORT 0x1C
#define CB710_MMC_RESPONSE0_PORT 0x20
#define CB710_MMC_RESPONSE1_PORT 0x24
#define CB710_MMC_RESPONSE2_PORT 0x28
#define CB710_MMC_RESPONSE3_PORT 0x2C
#endif /* LINUX_CB710_MMC_H */
...@@ -97,6 +97,14 @@ ...@@ -97,6 +97,14 @@
*/ */
#define r1b_timeout (HZ * 3) #define r1b_timeout (HZ * 3)
/* One of the critical speed parameters is the amount of data which may
* be transfered in one command. If this value is too low, the SD card
* controller has to do multiple partial block writes (argggh!). With
* today (2008) SD cards there is little speed gain if we transfer more
* than 64 KBytes at a time. So use this value until there is any indication
* that we should do more here.
*/
#define MMC_SPI_BLOCKSATONCE 128
/****************************************************************************/ /****************************************************************************/
...@@ -327,15 +335,16 @@ checkstatus: ...@@ -327,15 +335,16 @@ checkstatus:
/* Status byte: the entire seven-bit R1 response. */ /* Status byte: the entire seven-bit R1 response. */
if (cmd->resp[0] != 0) { if (cmd->resp[0] != 0) {
if ((R1_SPI_PARAMETER | R1_SPI_ADDRESS if ((R1_SPI_PARAMETER | R1_SPI_ADDRESS)
| R1_SPI_ILLEGAL_COMMAND)
& cmd->resp[0]) & cmd->resp[0])
value = -EINVAL; value = -EFAULT; /* Bad address */
else if (R1_SPI_ILLEGAL_COMMAND & cmd->resp[0])
value = -ENOSYS; /* Function not implemented */
else if (R1_SPI_COM_CRC & cmd->resp[0]) else if (R1_SPI_COM_CRC & cmd->resp[0])
value = -EILSEQ; value = -EILSEQ; /* Illegal byte sequence */
else if ((R1_SPI_ERASE_SEQ | R1_SPI_ERASE_RESET) else if ((R1_SPI_ERASE_SEQ | R1_SPI_ERASE_RESET)
& cmd->resp[0]) & cmd->resp[0])
value = -EIO; value = -EIO; /* I/O error */
/* else R1_SPI_IDLE, "it's resetting" */ /* else R1_SPI_IDLE, "it's resetting" */
} }
...@@ -1366,6 +1375,10 @@ static int mmc_spi_probe(struct spi_device *spi) ...@@ -1366,6 +1375,10 @@ static int mmc_spi_probe(struct spi_device *spi)
mmc->ops = &mmc_spi_ops; mmc->ops = &mmc_spi_ops;
mmc->max_blk_size = MMC_SPI_BLOCKSIZE; mmc->max_blk_size = MMC_SPI_BLOCKSIZE;
mmc->max_hw_segs = MMC_SPI_BLOCKSATONCE;
mmc->max_phys_segs = MMC_SPI_BLOCKSATONCE;
mmc->max_req_size = MMC_SPI_BLOCKSATONCE * MMC_SPI_BLOCKSIZE;
mmc->max_blk_count = MMC_SPI_BLOCKSATONCE;
mmc->caps = MMC_CAP_SPI; mmc->caps = MMC_CAP_SPI;
......
...@@ -746,8 +746,6 @@ static int mxcmci_probe(struct platform_device *pdev) ...@@ -746,8 +746,6 @@ static int mxcmci_probe(struct platform_device *pdev)
} }
mmc->f_min = clk_get_rate(host->clk) >> 16; mmc->f_min = clk_get_rate(host->clk) >> 16;
if (mmc->f_min < 400000)
mmc->f_min = 400000;
mmc->f_max = clk_get_rate(host->clk) >> 1; mmc->f_max = clk_get_rate(host->clk) >> 1;
/* recommended in data sheet */ /* recommended in data sheet */
......
...@@ -1593,7 +1593,6 @@ static int mmc_omap_resume(struct platform_device *pdev) ...@@ -1593,7 +1593,6 @@ static int mmc_omap_resume(struct platform_device *pdev)
#endif #endif
static struct platform_driver mmc_omap_driver = { static struct platform_driver mmc_omap_driver = {
.probe = mmc_omap_probe,
.remove = mmc_omap_remove, .remove = mmc_omap_remove,
.suspend = mmc_omap_suspend, .suspend = mmc_omap_suspend,
.resume = mmc_omap_resume, .resume = mmc_omap_resume,
...@@ -1605,7 +1604,7 @@ static struct platform_driver mmc_omap_driver = { ...@@ -1605,7 +1604,7 @@ static struct platform_driver mmc_omap_driver = {
static int __init mmc_omap_init(void) static int __init mmc_omap_init(void)
{ {
return platform_driver_register(&mmc_omap_driver); return platform_driver_probe(&mmc_omap_driver, mmc_omap_probe);
} }
static void __exit mmc_omap_exit(void) static void __exit mmc_omap_exit(void)
......
...@@ -27,6 +27,7 @@ ...@@ -27,6 +27,7 @@
#include <linux/err.h> #include <linux/err.h>
#include <linux/mmc/host.h> #include <linux/mmc/host.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/regulator/consumer.h>
#include <asm/sizes.h> #include <asm/sizes.h>
...@@ -67,8 +68,42 @@ struct pxamci_host { ...@@ -67,8 +68,42 @@ struct pxamci_host {
unsigned int dma_dir; unsigned int dma_dir;
unsigned int dma_drcmrrx; unsigned int dma_drcmrrx;
unsigned int dma_drcmrtx; unsigned int dma_drcmrtx;
struct regulator *vcc;
}; };
static inline void pxamci_init_ocr(struct pxamci_host *host)
{
#ifdef CONFIG_REGULATOR
host->vcc = regulator_get(mmc_dev(host->mmc), "vmmc");
if (IS_ERR(host->vcc))
host->vcc = NULL;
else {
host->mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vcc);
if (host->pdata && host->pdata->ocr_mask)
dev_warn(mmc_dev(host->mmc),
"ocr_mask/setpower will not be used\n");
}
#endif
if (host->vcc == NULL) {
/* fall-back to platform data */
host->mmc->ocr_avail = host->pdata ?
host->pdata->ocr_mask :
MMC_VDD_32_33 | MMC_VDD_33_34;
}
}
static inline void pxamci_set_power(struct pxamci_host *host, unsigned int vdd)
{
#ifdef CONFIG_REGULATOR
if (host->vcc)
mmc_regulator_set_ocr(host->vcc, vdd);
#endif
if (!host->vcc && host->pdata && host->pdata->setpower)
host->pdata->setpower(mmc_dev(host->mmc), vdd);
}
static void pxamci_stop_clock(struct pxamci_host *host) static void pxamci_stop_clock(struct pxamci_host *host)
{ {
if (readl(host->base + MMC_STAT) & STAT_CLK_EN) { if (readl(host->base + MMC_STAT) & STAT_CLK_EN) {
...@@ -438,8 +473,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) ...@@ -438,8 +473,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
if (host->power_mode != ios->power_mode) { if (host->power_mode != ios->power_mode) {
host->power_mode = ios->power_mode; host->power_mode = ios->power_mode;
if (host->pdata && host->pdata->setpower) pxamci_set_power(host, ios->vdd);
host->pdata->setpower(mmc_dev(mmc), ios->vdd);
if (ios->power_mode == MMC_POWER_ON) if (ios->power_mode == MMC_POWER_ON)
host->cmdat |= CMDAT_INIT; host->cmdat |= CMDAT_INIT;
...@@ -562,9 +596,8 @@ static int pxamci_probe(struct platform_device *pdev) ...@@ -562,9 +596,8 @@ static int pxamci_probe(struct platform_device *pdev)
mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000 mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000
: host->clkrate; : host->clkrate;
mmc->ocr_avail = host->pdata ? pxamci_init_ocr(host);
host->pdata->ocr_mask :
MMC_VDD_32_33|MMC_VDD_33_34;
mmc->caps = 0; mmc->caps = 0;
host->cmdat = 0; host->cmdat = 0;
if (!cpu_is_pxa25x()) { if (!cpu_is_pxa25x()) {
...@@ -661,6 +694,9 @@ static int pxamci_remove(struct platform_device *pdev) ...@@ -661,6 +694,9 @@ static int pxamci_remove(struct platform_device *pdev)
if (mmc) { if (mmc) {
struct pxamci_host *host = mmc_priv(mmc); struct pxamci_host *host = mmc_priv(mmc);
if (host->vcc)
regulator_put(host->vcc);
if (host->pdata && host->pdata->exit) if (host->pdata && host->pdata->exit)
host->pdata->exit(&pdev->dev, mmc); host->pdata->exit(&pdev->dev, mmc);
......
/*
* sdhci-pltfm.c Support for SDHCI platform devices
* Copyright (c) 2009 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* Supports:
* SDHCI platform devices
*
* Inspired by sdhci-pci.c, by Pierre Ossman
*/
#include <linux/delay.h>
#include <linux/highmem.h>
#include <linux/platform_device.h>
#include <linux/mmc/host.h>
#include <linux/io.h>
#include "sdhci.h"
/*****************************************************************************\
* *
* SDHCI core callbacks *
* *
\*****************************************************************************/
static struct sdhci_ops sdhci_pltfm_ops = {
};
/*****************************************************************************\
* *
* Device probing/removal *
* *
\*****************************************************************************/
static int __devinit sdhci_pltfm_probe(struct platform_device *pdev)
{
struct sdhci_host *host;
struct resource *iomem;
int ret;
BUG_ON(pdev == NULL);
iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!iomem) {
ret = -ENOMEM;
goto err;
}
if (resource_size(iomem) != 0x100)
dev_err(&pdev->dev, "Invalid iomem size. You may "
"experience problems.\n");
if (pdev->dev.parent)
host = sdhci_alloc_host(pdev->dev.parent, 0);
else
host = sdhci_alloc_host(&pdev->dev, 0);
if (IS_ERR(host)) {
ret = PTR_ERR(host);
goto err;
}
host->hw_name = "platform";
host->ops = &sdhci_pltfm_ops;
host->irq = platform_get_irq(pdev, 0);
if (!request_mem_region(iomem->start, resource_size(iomem),
mmc_hostname(host->mmc))) {
dev_err(&pdev->dev, "cannot request region\n");
ret = -EBUSY;
goto err_request;
}
host->ioaddr = ioremap(iomem->start, resource_size(iomem));
if (!host->ioaddr) {
dev_err(&pdev->dev, "failed to remap registers\n");
ret = -ENOMEM;
goto err_remap;
}
ret = sdhci_add_host(host);
if (ret)
goto err_add_host;
platform_set_drvdata(pdev, host);
return 0;
err_add_host:
iounmap(host->ioaddr);
err_remap:
release_mem_region(iomem->start, resource_size(iomem));
err_request:
sdhci_free_host(host);
err:
printk(KERN_ERR"Probing of sdhci-pltfm failed: %d\n", ret);
return ret;
}
static int __devexit sdhci_pltfm_remove(struct platform_device *pdev)
{
struct sdhci_host *host = platform_get_drvdata(pdev);
struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
int dead;
u32 scratch;
dead = 0;
scratch = readl(host->ioaddr + SDHCI_INT_STATUS);
if (scratch == (u32)-1)
dead = 1;
sdhci_remove_host(host, dead);
iounmap(host->ioaddr);
release_mem_region(iomem->start, resource_size(iomem));
sdhci_free_host(host);
platform_set_drvdata(pdev, NULL);
return 0;
}
static struct platform_driver sdhci_pltfm_driver = {
.driver = {
.name = "sdhci",
.owner = THIS_MODULE,
},
.probe = sdhci_pltfm_probe,
.remove = __devexit_p(sdhci_pltfm_remove),
};
/*****************************************************************************\
* *
* Driver init/exit *
* *
\*****************************************************************************/
static int __init sdhci_drv_init(void)
{
return platform_driver_register(&sdhci_pltfm_driver);
}
static void __exit sdhci_drv_exit(void)
{
platform_driver_unregister(&sdhci_pltfm_driver);
}
module_init(sdhci_drv_init);
module_exit(sdhci_drv_exit);
MODULE_DESCRIPTION("Secure Digital Host Controller Interface platform driver");
MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:sdhci");
...@@ -78,6 +78,11 @@ static void sdhci_dumpregs(struct sdhci_host *host) ...@@ -78,6 +78,11 @@ static void sdhci_dumpregs(struct sdhci_host *host)
sdhci_readl(host, SDHCI_CAPABILITIES), sdhci_readl(host, SDHCI_CAPABILITIES),
sdhci_readl(host, SDHCI_MAX_CURRENT)); sdhci_readl(host, SDHCI_MAX_CURRENT));
if (host->flags & SDHCI_USE_ADMA)
printk(KERN_DEBUG DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
readl(host->ioaddr + SDHCI_ADMA_ERROR),
readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n"); printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n");
} }
...@@ -1005,50 +1010,53 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power) ...@@ -1005,50 +1010,53 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
{ {
u8 pwr; u8 pwr;
if (host->power == power) if (power == (unsigned short)-1)
return; pwr = 0;
else {
if (power == (unsigned short)-1) {
sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
goto out;
}
/*
* Spec says that we should clear the power reg before setting
* a new value. Some controllers don't seem to like this though.
*/
if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
pwr = SDHCI_POWER_ON;
switch (1 << power) { switch (1 << power) {
case MMC_VDD_165_195: case MMC_VDD_165_195:
pwr |= SDHCI_POWER_180; pwr = SDHCI_POWER_180;
break; break;
case MMC_VDD_29_30: case MMC_VDD_29_30:
case MMC_VDD_30_31: case MMC_VDD_30_31:
pwr |= SDHCI_POWER_300; pwr = SDHCI_POWER_300;
break; break;
case MMC_VDD_32_33: case MMC_VDD_32_33:
case MMC_VDD_33_34: case MMC_VDD_33_34:
pwr |= SDHCI_POWER_330; pwr = SDHCI_POWER_330;
break; break;
default: default:
BUG(); BUG();
} }
}
if (host->pwr == pwr)
return;
host->pwr = pwr;
if (pwr == 0) {
sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
return;
}
/*
* Spec says that we should clear the power reg before setting
* a new value. Some controllers don't seem to like this though.
*/
if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
/* /*
* At least the Marvell CaFe chip gets confused if we set the voltage * At least the Marvell CaFe chip gets confused if we set the voltage
* and set turn on power at the same time, so set the voltage first. * and set turn on power at the same time, so set the voltage first.
*/ */
if ((host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)) if ((host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER))
sdhci_writeb(host, pwr & ~SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
out: pwr |= SDHCI_POWER_ON;
host->power = power;
sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
} }
/*****************************************************************************\ /*****************************************************************************\
......
...@@ -255,7 +255,7 @@ struct sdhci_host { ...@@ -255,7 +255,7 @@ struct sdhci_host {
unsigned int timeout_clk; /* Timeout freq (KHz) */ unsigned int timeout_clk; /* Timeout freq (KHz) */
unsigned int clock; /* Current clock (MHz) */ unsigned int clock; /* Current clock (MHz) */
unsigned short power; /* Current voltage */ u8 pwr; /* Current voltage */
struct mmc_request *mrq; /* Current request */ struct mmc_request *mrq; /* Current request */
struct mmc_command *cmd; /* Current command */ struct mmc_command *cmd; /* Current command */
......
This diff is collapsed.
...@@ -83,34 +83,36 @@ ...@@ -83,34 +83,36 @@
TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT) TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
#define TMIO_MASK_IRQ (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD) #define TMIO_MASK_IRQ (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD)
#define enable_mmc_irqs(ctl, i) \
#define enable_mmc_irqs(host, i) \
do { \ do { \
u32 mask;\ u32 mask;\
mask = tmio_ioread32((ctl) + CTL_IRQ_MASK); \ mask = sd_ctrl_read32((host), CTL_IRQ_MASK); \
mask &= ~((i) & TMIO_MASK_IRQ); \ mask &= ~((i) & TMIO_MASK_IRQ); \
tmio_iowrite32(mask, (ctl) + CTL_IRQ_MASK); \ sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \
} while (0) } while (0)
#define disable_mmc_irqs(ctl, i) \ #define disable_mmc_irqs(host, i) \
do { \ do { \
u32 mask;\ u32 mask;\
mask = tmio_ioread32((ctl) + CTL_IRQ_MASK); \ mask = sd_ctrl_read32((host), CTL_IRQ_MASK); \
mask |= ((i) & TMIO_MASK_IRQ); \ mask |= ((i) & TMIO_MASK_IRQ); \
tmio_iowrite32(mask, (ctl) + CTL_IRQ_MASK); \ sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \
} while (0) } while (0)
#define ack_mmc_irqs(ctl, i) \ #define ack_mmc_irqs(host, i) \
do { \ do { \
u32 mask;\ u32 mask;\
mask = tmio_ioread32((ctl) + CTL_STATUS); \ mask = sd_ctrl_read32((host), CTL_STATUS); \
mask &= ~((i) & TMIO_MASK_IRQ); \ mask &= ~((i) & TMIO_MASK_IRQ); \
tmio_iowrite32(mask, (ctl) + CTL_STATUS); \ sd_ctrl_write32((host), CTL_STATUS, mask); \
} while (0) } while (0)
struct tmio_mmc_host { struct tmio_mmc_host {
void __iomem *cnf; void __iomem *cnf;
void __iomem *ctl; void __iomem *ctl;
unsigned long bus_shift;
struct mmc_command *cmd; struct mmc_command *cmd;
struct mmc_request *mrq; struct mmc_request *mrq;
struct mmc_data *data; struct mmc_data *data;
...@@ -123,6 +125,63 @@ struct tmio_mmc_host { ...@@ -123,6 +125,63 @@ struct tmio_mmc_host {
unsigned int sg_off; unsigned int sg_off;
}; };
#include <linux/io.h>
static inline u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr)
{
return readw(host->ctl + (addr << host->bus_shift));
}
static inline void sd_ctrl_read16_rep(struct tmio_mmc_host *host, int addr,
u16 *buf, int count)
{
readsw(host->ctl + (addr << host->bus_shift), buf, count);
}
static inline u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr)
{
return readw(host->ctl + (addr << host->bus_shift)) |
readw(host->ctl + ((addr + 2) << host->bus_shift)) << 16;
}
static inline void sd_ctrl_write16(struct tmio_mmc_host *host, int addr,
u16 val)
{
writew(val, host->ctl + (addr << host->bus_shift));
}
static inline void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr,
u16 *buf, int count)
{
writesw(host->ctl + (addr << host->bus_shift), buf, count);
}
static inline void sd_ctrl_write32(struct tmio_mmc_host *host, int addr,
u32 val)
{
writew(val, host->ctl + (addr << host->bus_shift));
writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
}
static inline void sd_config_write8(struct tmio_mmc_host *host, int addr,
u8 val)
{
writeb(val, host->cnf + (addr << host->bus_shift));
}
static inline void sd_config_write16(struct tmio_mmc_host *host, int addr,
u16 val)
{
writew(val, host->cnf + (addr << host->bus_shift));
}
static inline void sd_config_write32(struct tmio_mmc_host *host, int addr,
u32 val)
{
writew(val, host->cnf + (addr << host->bus_shift));
writew(val >> 16, host->cnf + ((addr + 2) << host->bus_shift));
}
#include <linux/scatterlist.h> #include <linux/scatterlist.h>
#include <linux/blkdev.h> #include <linux/blkdev.h>
......
/*
* cb710/cb710.h
*
* Copyright by Michał Mirosław, 2008-2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef LINUX_CB710_DRIVER_H
#define LINUX_CB710_DRIVER_H
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/mmc/host.h>
struct cb710_slot;
typedef int (*cb710_irq_handler_t)(struct cb710_slot *);
/* per-virtual-slot structure */
struct cb710_slot {
struct platform_device pdev;
void __iomem *iobase;
cb710_irq_handler_t irq_handler;
};
/* per-device structure */
struct cb710_chip {
struct pci_dev *pdev;
void __iomem *iobase;
unsigned platform_id;
#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
atomic_t slot_refs_count;
#endif
unsigned slot_mask;
unsigned slots;
spinlock_t irq_lock;
struct cb710_slot slot[0];
};
/* NOTE: cb710_chip.slots is modified only during device init/exit and
* they are all serialized wrt themselves */
/* cb710_chip.slot_mask values */
#define CB710_SLOT_MMC 1
#define CB710_SLOT_MS 2
#define CB710_SLOT_SM 4
/* slot port accessors - so the logic is more clear in the code */
#define CB710_PORT_ACCESSORS(t) \
static inline void cb710_write_port_##t(struct cb710_slot *slot, \
unsigned port, u##t value) \
{ \
iowrite##t(value, slot->iobase + port); \
} \
\
static inline u##t cb710_read_port_##t(struct cb710_slot *slot, \
unsigned port) \
{ \
return ioread##t(slot->iobase + port); \
} \
\
static inline void cb710_modify_port_##t(struct cb710_slot *slot, \
unsigned port, u##t set, u##t clear) \
{ \
iowrite##t( \
(ioread##t(slot->iobase + port) & ~clear)|set, \
slot->iobase + port); \
}
CB710_PORT_ACCESSORS(8)
CB710_PORT_ACCESSORS(16)
CB710_PORT_ACCESSORS(32)
void cb710_pci_update_config_reg(struct pci_dev *pdev,
int reg, uint32_t and, uint32_t xor);
void cb710_set_irq_handler(struct cb710_slot *slot,
cb710_irq_handler_t handler);
/* some device struct walking */
static inline struct cb710_slot *cb710_pdev_to_slot(
struct platform_device *pdev)
{
return container_of(pdev, struct cb710_slot, pdev);
}
static inline struct cb710_chip *cb710_slot_to_chip(struct cb710_slot *slot)
{
return dev_get_drvdata(slot->pdev.dev.parent);
}
static inline struct device *cb710_slot_dev(struct cb710_slot *slot)
{
return &slot->pdev.dev;
}
static inline struct device *cb710_chip_dev(struct cb710_chip *chip)
{
return &chip->pdev->dev;
}
/* debugging aids */
#ifdef CONFIG_CB710_DEBUG
void cb710_dump_regs(struct cb710_chip *chip, unsigned dump);
#else
#define cb710_dump_regs(c, d) do {} while (0)
#endif
#define CB710_DUMP_REGS_MMC 0x0F
#define CB710_DUMP_REGS_MS 0x30
#define CB710_DUMP_REGS_SM 0xC0
#define CB710_DUMP_REGS_ALL 0xFF
#define CB710_DUMP_REGS_MASK 0xFF
#define CB710_DUMP_ACCESS_8 0x100
#define CB710_DUMP_ACCESS_16 0x200
#define CB710_DUMP_ACCESS_32 0x400
#define CB710_DUMP_ACCESS_ALL 0x700
#define CB710_DUMP_ACCESS_MASK 0x700
#endif /* LINUX_CB710_DRIVER_H */
/*
* cb710/sgbuf2.h
*
* Copyright by Michał Mirosław, 2008-2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef LINUX_CB710_SG_H
#define LINUX_CB710_SG_H
#include <linux/highmem.h>
#include <linux/scatterlist.h>
/**
* cb710_sg_miter_stop_writing - stop mapping iteration after writing
* @miter: sg mapping iter to be stopped
*
* Description:
* Stops mapping iterator @miter. @miter should have been started
* started using sg_miter_start(). A stopped iteration can be
* resumed by calling sg_miter_next() on it. This is useful when
* resources (kmap) need to be released during iteration.
*
* This is a convenience wrapper that will be optimized out for arches
* that don't need flush_kernel_dcache_page().
*
* Context:
* IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise.
*/
static inline void cb710_sg_miter_stop_writing(struct sg_mapping_iter *miter)
{
if (miter->page)
flush_kernel_dcache_page(miter->page);
sg_miter_stop(miter);
}
/*
* 32-bit PIO mapping sg iterator
*
* Hides scatterlist access issues - fragment boundaries, alignment, page
* mapping - for drivers using 32-bit-word-at-a-time-PIO (ie. PCI devices
* without DMA support).
*
* Best-case reading (transfer from device):
* sg_miter_start();
* cb710_sg_dwiter_write_from_io();
* cb710_sg_miter_stop_writing();
*
* Best-case writing (transfer to device):
* sg_miter_start();
* cb710_sg_dwiter_read_to_io();
* sg_miter_stop();
*/
uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter);
void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data);
/**
* cb710_sg_dwiter_write_from_io - transfer data to mapped buffer from 32-bit IO port
* @miter: sg mapping iter
* @port: PIO port - IO or MMIO address
* @count: number of 32-bit words to transfer
*
* Description:
* Reads @count 32-bit words from register @port and stores it in
* buffer iterated by @miter. Data that would overflow the buffer
* is silently ignored. Iterator is advanced by 4*@count bytes
* or to the buffer's end whichever is closer.
*
* Context:
* IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise.
*/
static inline void cb710_sg_dwiter_write_from_io(struct sg_mapping_iter *miter,
void __iomem *port, size_t count)
{
while (count-- > 0)
cb710_sg_dwiter_write_next_block(miter, ioread32(port));
}
/**
* cb710_sg_dwiter_read_to_io - transfer data to 32-bit IO port from mapped buffer
* @miter: sg mapping iter
* @port: PIO port - IO or MMIO address
* @count: number of 32-bit words to transfer
*
* Description:
* Writes @count 32-bit words to register @port from buffer iterated
* through @miter. If buffer ends before @count words are written
* missing data is replaced by zeroes. @miter is advanced by 4*@count
* bytes or to the buffer's end whichever is closer.
*
* Context:
* IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise.
*/
static inline void cb710_sg_dwiter_read_to_io(struct sg_mapping_iter *miter,
void __iomem *port, size_t count)
{
while (count-- > 0)
iowrite32(cb710_sg_dwiter_read_next_block(miter), port);
}
#endif /* LINUX_CB710_SG_H */
...@@ -18,6 +18,13 @@ ...@@ -18,6 +18,13 @@
writew((val) >> 16, (addr) + 2); \ writew((val) >> 16, (addr) + 2); \
} while (0) } while (0)
/*
* data for the MMC controller
*/
struct tmio_mmc_data {
unsigned int hclk;
};
/* /*
* data for the NAND controller * data for the NAND controller
*/ */
......
...@@ -2127,6 +2127,7 @@ ...@@ -2127,6 +2127,7 @@
#define PCI_VENDOR_ID_MAINPINE 0x1522 #define PCI_VENDOR_ID_MAINPINE 0x1522
#define PCI_DEVICE_ID_MAINPINE_PBRIDGE 0x0100 #define PCI_DEVICE_ID_MAINPINE_PBRIDGE 0x0100
#define PCI_VENDOR_ID_ENE 0x1524 #define PCI_VENDOR_ID_ENE 0x1524
#define PCI_DEVICE_ID_ENE_CB710_FLASH 0x0510
#define PCI_DEVICE_ID_ENE_CB712_SD 0x0550 #define PCI_DEVICE_ID_ENE_CB712_SD 0x0550
#define PCI_DEVICE_ID_ENE_CB712_SD_2 0x0551 #define PCI_DEVICE_ID_ENE_CB712_SD_2 0x0551
#define PCI_DEVICE_ID_ENE_CB714_SD 0x0750 #define PCI_DEVICE_ID_ENE_CB714_SD 0x0750
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment