Commit 2091a17f authored by Sergei Shtylyov's avatar Sergei Shtylyov Committed by Ralf Baechle

[MIPS] Pb1500 code style cleanup

Fix several errors and warnings given by checkpatch.pl:

- use of C99 // comments;

- printk() without KERN_* facility level;

- unnecessary braces for single-statement block;

- using simple_strtol() where strict_strtol() could be used.

In addition to these changes, also do the following:

- replace numeric literals/expressions with the matching macros;

- insert spaces between operator and its operands;

- properly indent the code and the array initializers;

- remove useless #if dirctive from board_setup();

- remove needless parentheses;

- remove unneeded type casts;

- remove excess new lines;

- make hexadecimal literals all lower case;

- remove space after the type cast's closing parenthesis;

- insert missing space before closing brace in the array initializers;

- replace spaces after the macro name with tabs in the #define directives,
  also sometimes insert space there for better looks;

- fix typos/errors, capitalize acronyms, etc. in the comments;

- update MontaVista copyright;

- remove Pete Popov's old email address...
Signed-off-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent be1c3c1e
# #
# Copyright 2000,2001 MontaVista Software Inc. # Copyright 2000, 2001, 2008 MontaVista Software Inc.
# Author: MontaVista Software, Inc. # Author: MontaVista Software, Inc. <source@mvista.com>
# ppopov@mvista.com or source@mvista.com
# #
# Makefile for the Alchemy Semiconductor Pb1500 board. # Makefile for the Alchemy Semiconductor Pb1500 board.
#
lib-y := init.o board_setup.o irqmap.o lib-y := init.o board_setup.o irqmap.o
/* /*
* Copyright 2000 MontaVista Software Inc. * Copyright 2000, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. * Author: MontaVista Software, Inc. <source@mvista.com>
* ppopov@mvista.com or source@mvista.com
* *
* This program is free software; you can redistribute it and/or modify it * This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the * under the terms of the GNU General Public License as published by the
...@@ -32,8 +31,8 @@ ...@@ -32,8 +31,8 @@
void board_reset(void) void board_reset(void)
{ {
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ /* Hit BCSR.RST_VDDI[SOFT_RESET] */
au_writel(0x00000000, 0xAE00001C); au_writel(0x00000000, PB1500_RST_VDDI);
} }
void __init board_setup(void) void __init board_setup(void)
...@@ -42,7 +41,7 @@ void __init board_setup(void) ...@@ -42,7 +41,7 @@ void __init board_setup(void)
u32 sys_freqctrl, sys_clksrc; u32 sys_freqctrl, sys_clksrc;
sys_clksrc = sys_freqctrl = pin_func = 0; sys_clksrc = sys_freqctrl = pin_func = 0;
// set AUX clock to 12MHz * 8 = 96 MHz /* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL); au_writel(8, SYS_AUXPLL);
au_writel(0, SYS_PINSTATERD); au_writel(0, SYS_PINSTATERD);
udelay(100); udelay(100);
...@@ -51,51 +50,48 @@ void __init board_setup(void) ...@@ -51,51 +50,48 @@ void __init board_setup(void)
/* GPIO201 is input for PCMCIA card detect */ /* GPIO201 is input for PCMCIA card detect */
/* GPIO203 is input for PCMCIA interrupt request */ /* GPIO203 is input for PCMCIA interrupt request */
au_writel(au_readl(GPIO2_DIR) & (u32)(~((1<<1)|(1<<3))), GPIO2_DIR); au_writel(au_readl(GPIO2_DIR) & ~((1 << 1) | (1 << 3)), GPIO2_DIR);
/* zero and disable FREQ2 */ /* Zero and disable FREQ2 */
sys_freqctrl = au_readl(SYS_FREQCTRL0); sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000; sys_freqctrl &= ~0xFFF00000;
au_writel(sys_freqctrl, SYS_FREQCTRL0); au_writel(sys_freqctrl, SYS_FREQCTRL0);
/* zero and disable USBH/USBD clocks */ /* zero and disable USBH/USBD clocks */
sys_clksrc = au_readl(SYS_CLKSRC); sys_clksrc = au_readl(SYS_CLKSRC);
sys_clksrc &= ~0x00007FE0; sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
au_writel(sys_clksrc, SYS_CLKSRC); au_writel(sys_clksrc, SYS_CLKSRC);
sys_freqctrl = au_readl(SYS_FREQCTRL0); sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000; sys_freqctrl &= ~0xFFF00000;
sys_clksrc = au_readl(SYS_CLKSRC); sys_clksrc = au_readl(SYS_CLKSRC);
sys_clksrc &= ~0x00007FE0; sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
// FREQ2 = aux/2 = 48 MHz /* FREQ2 = aux/2 = 48 MHz */
sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20)); sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2 | SYS_FC_FS2;
au_writel(sys_freqctrl, SYS_FREQCTRL0); au_writel(sys_freqctrl, SYS_FREQCTRL0);
/* /*
* Route 48MHz FREQ2 into USB Host and/or Device * Route 48MHz FREQ2 into USB Host and/or Device
*/ */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT;
sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
#endif
au_writel(sys_clksrc, SYS_CLKSRC); au_writel(sys_clksrc, SYS_CLKSRC);
pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_USB;
pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000); /* 2nd USB port is USB host */
// 2nd USB port is USB host pin_func |= SYS_PF_USB;
pin_func |= 0x8000;
au_writel(pin_func, SYS_PINFUNC); au_writel(pin_func, SYS_PINFUNC);
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
#ifdef CONFIG_PCI #ifdef CONFIG_PCI
// Setup PCI bus controller /* Setup PCI bus controller */
au_writel(0, Au1500_PCI_CMEM); au_writel(0, Au1500_PCI_CMEM);
au_writel(0x00003fff, Au1500_CFG_BASE); au_writel(0x00003fff, Au1500_CFG_BASE);
#if defined(__MIPSEB__) #if defined(__MIPSEB__)
au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG); au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
#else #else
au_writel(0xf, Au1500_PCI_CFG); au_writel(0xf, Au1500_PCI_CFG);
#endif #endif
...@@ -112,11 +108,11 @@ void __init board_setup(void) ...@@ -112,11 +108,11 @@ void __init board_setup(void)
/* Enable the RTC if not already enabled */ /* Enable the RTC if not already enabled */
if (!(au_readl(0xac000028) & 0x20)) { if (!(au_readl(0xac000028) & 0x20)) {
printk("enabling clock ...\n"); printk(KERN_INFO "enabling clock ...\n");
au_writel((au_readl(0xac000028) | 0x20), 0xac000028); au_writel((au_readl(0xac000028) | 0x20), 0xac000028);
} }
/* Put the clock in BCD mode */ /* Put the clock in BCD mode */
if (au_readl(0xac00002C) & 0x4) { /* reg B */ if (au_readl(0xac00002c) & 0x4) { /* reg B */
au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c); au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c);
au_sync(); au_sync();
} }
......
/* /*
* *
* BRIEF MODULE DESCRIPTION * BRIEF MODULE DESCRIPTION
* PB1500 board setup * Pb1500 board setup
* *
* Copyright 2001 MontaVista Software Inc. * Copyright 2001, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. * Author: MontaVista Software, Inc. <source@mvista.com>
* ppopov@mvista.com or source@mvista.com
* *
* This program is free software; you can redistribute it and/or modify it * This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the * under the terms of the GNU General Public License as published by the
...@@ -45,16 +44,15 @@ void __init prom_init(void) ...@@ -45,16 +44,15 @@ void __init prom_init(void)
unsigned char *memsize_str; unsigned char *memsize_str;
unsigned long memsize; unsigned long memsize;
prom_argc = (int) fw_arg0; prom_argc = (int)fw_arg0;
prom_argv = (char **) fw_arg1; prom_argv = (char **)fw_arg1;
prom_envp = (char **) fw_arg2; prom_envp = (char **)fw_arg2;
prom_init_cmdline(); prom_init_cmdline();
memsize_str = prom_getenv("memsize"); memsize_str = prom_getenv("memsize");
if (!memsize_str) { if (!memsize_str)
memsize = 0x04000000; memsize = 0x04000000;
} else { else
memsize = simple_strtol(memsize_str, NULL, 0); memsize = strict_strtol(memsize_str, 0, NULL);
}
add_memory_region(0, memsize, BOOT_MEM_RAM); add_memory_region(0, memsize, BOOT_MEM_RAM);
} }
...@@ -31,12 +31,12 @@ ...@@ -31,12 +31,12 @@
#include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1000.h>
char irq_tab_alchemy[][5] __initdata = { char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT370 */ [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */
[13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
}; };
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0}, { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 }, { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
......
/* /*
* Alchemy Semi PB1500 Referrence Board * Alchemy Semi Pb1500 Referrence Board
* *
* Copyright 2001 MontaVista Software Inc. * Copyright 2001, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. * Author: MontaVista Software, Inc. <source@mvista.com>
* ppopov@mvista.com or source@mvista.com
* *
* ######################################################################## * ########################################################################
* *
...@@ -27,13 +26,12 @@ ...@@ -27,13 +26,12 @@
#ifndef __ASM_PB1500_H #ifndef __ASM_PB1500_H
#define __ASM_PB1500_H #define __ASM_PB1500_H
#define IDENT_BOARD_REG 0xAE000000 #define IDENT_BOARD_REG 0xAE000000
#define BOARD_STATUS_REG 0xAE000004 #define BOARD_STATUS_REG 0xAE000004
#define PCI_BOARD_REG 0xAE000010 #define PCI_BOARD_REG 0xAE000010
#define PCMCIA_BOARD_REG 0xAE000010 #define PCMCIA_BOARD_REG 0xAE000010
#define PC_DEASSERT_RST 0x80 # define PC_DEASSERT_RST 0x80
#define PC_DRV_EN 0x10 # define PC_DRV_EN 0x10
#define PB1500_G_CONTROL 0xAE000014 #define PB1500_G_CONTROL 0xAE000014
#define PB1500_RST_VDDI 0xAE00001C #define PB1500_RST_VDDI 0xAE00001C
#define PB1500_LEDS 0xAE000018 #define PB1500_LEDS 0xAE000018
...@@ -41,11 +39,11 @@ ...@@ -41,11 +39,11 @@
#define PB1500_HEX_LED 0xAF000004 #define PB1500_HEX_LED 0xAF000004
#define PB1500_HEX_LED_BLANK 0xAF000008 #define PB1500_HEX_LED_BLANK 0xAF000008
/* PCMCIA PB1500 specific defines */ /* PCMCIA Pb1500 specific defines */
#define PCMCIA_MAX_SOCK 0 #define PCMCIA_MAX_SOCK 0
#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) #define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */ /* VPP/VCC */
#define SET_VCC_VPP(VCC, VPP) (((VCC)<<2) | ((VPP)<<0)) #define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
#endif /* __ASM_PB1500_H */ #endif /* __ASM_PB1500_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment