Skip to content

L
linux-davinci
Commit 2091a17f authored by Sergei Shtylyov's avatar Sergei Shtylyov Committed by Ralf Baechle
Browse files
Options

[MIPS] Pb1500 code style cleanup 

Fix several errors and warnings given by checkpatch.pl:

- use of C99 // comments;

- printk() without KERN_* facility level;

- unnecessary braces for single-statement block;

- using simple_strtol() where strict_strtol() could be used.

In addition to these changes, also do the following:

- replace numeric literals/expressions with the matching macros;

- insert spaces between operator and its operands;

- properly indent the code and the array initializers;

- remove useless #if dirctive from board_setup();

- remove needless parentheses;

- remove unneeded type casts;

- remove excess new lines;

- make hexadecimal literals all lower case;

- remove space after the type cast's closing parenthesis;

- insert missing space before closing brace in the array initializers;

- replace spaces after the macro name with tabs in the #define directives,
  also sometimes insert space there for better looks;

- fix typos/errors, capitalize acronyms, etc. in the comments;

- update MontaVista copyright;

- remove Pete Popov's old email address...
Signed-off-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent be1c3c1e
Show whitespace changes
Inline Side-by-side
Showing with 54 additions and 62 deletions
arch/mips/au1000/pb1500/Makefile
View file @ 2091a17f
#
# Copyright 2000,2001 MontaVista Software Inc.
# Author: MontaVista Software, Inc.
# ppopov@mvista.com or source@mvista.com
# Copyright 2000, 2001, 2008 MontaVista Software Inc.
# Author: MontaVista Software, Inc. <source@mvista.com>
#
# Makefile for the Alchemy Semiconductor Pb1500 board.
#
lib-y := init.o board_setup.o irqmap.o
arch/mips/au1000/pb1500/board_setup.c
View file @ 2091a17f
/*
* Copyright 2000 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
* Copyright 2000, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -32,8 +31,8 @@
void board_reset(void)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
au_writel(0x00000000, 0xAE00001C);
/* Hit BCSR.RST_VDDI[SOFT_RESET] */
au_writel(0x00000000, PB1500_RST_VDDI);
}
void __init board_setup(void)
......@@ -42,7 +41,7 @@ void __init board_setup(void)
u32 sys_freqctrl, sys_clksrc;
sys_clksrc = sys_freqctrl = pin_func = 0;
// set AUX clock to 12MHz * 8 = 96 MHz
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
au_writel(0, SYS_PINSTATERD);
udelay(100);
......@@ -51,51 +50,48 @@ void __init board_setup(void)
/* GPIO201 is input for PCMCIA card detect */
/* GPIO203 is input for PCMCIA interrupt request */
au_writel(au_readl(GPIO2_DIR) & (u32)(~((1<<1)|(1<<3))), GPIO2_DIR);
au_writel(au_readl(GPIO2_DIR) & ~((1 << 1) | (1 << 3)), GPIO2_DIR);
/* zero and disable FREQ2 */
/* Zero and disable FREQ2 */
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
/* zero and disable USBH/USBD clocks */
sys_clksrc = au_readl(SYS_CLKSRC);
sys_clksrc &= ~0x00007FE0;
sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
au_writel(sys_clksrc, SYS_CLKSRC);
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
sys_clksrc = au_readl(SYS_CLKSRC);
sys_clksrc &= ~0x00007FE0;
sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
// FREQ2 = aux/2 = 48 MHz
sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
/* FREQ2 = aux/2 = 48 MHz */
sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2 | SYS_FC_FS2;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
/*
* Route 48MHz FREQ2 into USB Host and/or Device
*/
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
#endif
sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT;
au_writel(sys_clksrc, SYS_CLKSRC);
pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
// 2nd USB port is USB host
pin_func |= 0x8000;
pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_USB;
/* 2nd USB port is USB host */
pin_func |= SYS_PF_USB;
au_writel(pin_func, SYS_PINFUNC);
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
#ifdef CONFIG_PCI
// Setup PCI bus controller
/* Setup PCI bus controller */
au_writel(0, Au1500_PCI_CMEM);
au_writel(0x00003fff, Au1500_CFG_BASE);
#if defined(__MIPSEB__)
au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG);
au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
#else
au_writel(0xf, Au1500_PCI_CFG);
#endif
......@@ -112,11 +108,11 @@ void __init board_setup(void)
/* Enable the RTC if not already enabled */
if (!(au_readl(0xac000028) & 0x20)) {
printk("enabling clock ...\n");
printk(KERN_INFO "enabling clock ...\n");
au_writel((au_readl(0xac000028) | 0x20), 0xac000028);
}
/* Put the clock in BCD mode */
if (au_readl(0xac00002C) & 0x4) { /* reg B */
if (au_readl(0xac00002c) & 0x4) { /* reg B */
au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c);
au_sync();
}
......
arch/mips/au1000/pb1500/init.c
View file @ 2091a17f
/*
*
* BRIEF MODULE DESCRIPTION
* PB1500 board setup
* Pb1500 board setup
*
* Copyright 2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
* Copyright 2001, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -45,16 +44,15 @@ void __init prom_init(void)
unsigned char *memsize_str;
unsigned long memsize;
prom_argc = (int) fw_arg0;
prom_argv = (char **) fw_arg1;
prom_envp = (char **) fw_arg2;
prom_argc = (int)fw_arg0;
prom_argv = (char **)fw_arg1;
prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
if (!memsize_str) {
if (!memsize_str)
memsize = 0x04000000;
} else {
memsize = simple_strtol(memsize_str, NULL, 0);
}
else
memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
arch/mips/au1000/pb1500/irqmap.c
View file @ 2091a17f
......@@ -31,12 +31,12 @@
#include <asm/mach-au1x00/au1000.h>
char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT370 */
[13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
......
include/asm-mips/mach-pb1x00/pb1500.h
View file @ 2091a17f
/*
* Alchemy Semi PB1500 Referrence Board
* Alchemy Semi Pb1500 Referrence Board
*
* Copyright 2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
* Copyright 2001, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* ########################################################################
*
......@@ -27,13 +26,12 @@
#ifndef __ASM_PB1500_H
#define __ASM_PB1500_H
#define IDENT_BOARD_REG 0xAE000000
#define BOARD_STATUS_REG 0xAE000004
#define PCI_BOARD_REG 0xAE000010
#define PCMCIA_BOARD_REG 0xAE000010
#define PC_DEASSERT_RST 0x80
#define PC_DRV_EN 0x10
# define PC_DEASSERT_RST 0x80
# define PC_DRV_EN 0x10
#define PB1500_G_CONTROL 0xAE000014
#define PB1500_RST_VDDI 0xAE00001C
#define PB1500_LEDS 0xAE000018
......@@ -41,11 +39,11 @@
#define PB1500_HEX_LED 0xAF000004
#define PB1500_HEX_LED_BLANK 0xAF000008
/* PCMCIA PB1500 specific defines */
/* PCMCIA Pb1500 specific defines */
#define PCMCIA_MAX_SOCK 0
#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
#define SET_VCC_VPP(VCC, VPP) (((VCC)<<2) | ((VPP)<<0))
#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
#endif /* __ASM_PB1500_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment