MIPS: Octeon: Remove vestiges of CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB

The config option CAVIUM_RESERVE32_USE_WIRED_TLB is not supported.
Remove the dead code controlled by it.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1028/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/cavium-octeon/setup.c

@@ -186,54 +186,6 @@ void octeon_check_cpu_bist(void)
 	write_octeon_c0_dcacheerr(0);
 }
 
-#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
-/**
- * Called on every core to setup the wired tlb entry needed
- * if CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB is set.
- *
- */
-static void octeon_hal_setup_per_cpu_reserved32(void *unused)
-{
-	/*
-	 * The config has selected to wire the reserve32 memory for all
-	 * userspace applications. We need to put a wired TLB entry in for each
-	 * 512MB of reserve32 memory. We only handle double 256MB pages here,
-	 * so reserve32 must be multiple of 512MB.
-	 */
-	uint32_t size = CONFIG_CAVIUM_RESERVE32;
-	uint32_t entrylo0 =
-		0x7 | ((octeon_reserve32_memory & ((1ul << 40) - 1)) >> 6);
-	uint32_t entrylo1 = entrylo0 + (256 << 14);
-	uint32_t entryhi = (0x80000000UL - (CONFIG_CAVIUM_RESERVE32 << 20));
-	while (size >= 512) {
-#if 0
-		pr_info("CPU%d: Adding double wired TLB entry for 0x%lx\n",
-			smp_processor_id(), entryhi);
-#endif
-		add_wired_entry(entrylo0, entrylo1, entryhi, PM_256M);
-		entrylo0 += 512 << 14;
-		entrylo1 += 512 << 14;
-		entryhi += 512 << 20;
-		size -= 512;
-	}
-}
-#endif /* CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB */
-
-/**
- * Called to release the named block which was used to made sure
- * that nobody used the memory for something else during
- * init. Now we'll free it so userspace apps can use this
- * memory region with bootmem_alloc.
- *
- * This function is called only once from prom_free_prom_memory().
- */
-void octeon_hal_setup_reserved32(void)
-{
-#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
-	on_each_cpu(octeon_hal_setup_per_cpu_reserved32, NULL, 0, 1);
-#endif
-}
-
 /**
  * Reboot Octeon
  *
@@ -502,25 +454,13 @@ void __init prom_init(void)
 	 * memory when it is getting memory from the
 	 * bootloader. Later, after the memory allocations are
 	 * complete, the reserve32 will be freed.
-	 */
-#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
-	if (CONFIG_CAVIUM_RESERVE32 & 0x1ff)
-		pr_err("CAVIUM_RESERVE32 isn't a multiple of 512MB. "
-		       "This is required if CAVIUM_RESERVE32_USE_WIRED_TLB "
-		       "is set\n");
-	else
-		addr = cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32 << 20,
-							0, 0, 512 << 20,
-							"CAVIUM_RESERVE32", 0);
-#else
-	/*
+	 *
 	 * Allocate memory for RESERVED32 aligned on 2MB boundary. This
 	 * is in case we later use hugetlb entries with it.
 	 */
 	addr = cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32 << 20,
 						0, 0, 2 << 20,
 						"CAVIUM_RESERVE32", 0);
-#endif
 	if (addr < 0)
 		pr_err("Failed to allocate CAVIUM_RESERVE32 memory area\n");
 	else
@@ -817,9 +757,4 @@ void prom_free_prom_memory(void)
 		panic("Unable to request_irq(OCTEON_IRQ_RML)\n");
 	}
 #endif
-
-	/* This call is here so that it is performed after any TLB
-	   initializations. It needs to be after these in case the
-	   CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB option is set */
-	octeon_hal_setup_reserved32();
 }