Merge branch 'x86/mce3' into x86/urgent

arch/x86/include/asm/mce.h

@@ -102,15 +102,39 @@ struct mce_log {
 
 #ifdef __KERNEL__
 
+#include <linux/percpu.h>
+#include <linux/init.h>
+#include <asm/atomic.h>
+
 extern int mce_disabled;
+extern int mce_p5_enabled;
 
-#include <asm/atomic.h>
-#include <linux/percpu.h>
+#ifdef CONFIG_X86_MCE
+void mcheck_init(struct cpuinfo_x86 *c);
+#else
+static inline void mcheck_init(struct cpuinfo_x86 *c) {}
+#endif
+
+#ifdef CONFIG_X86_OLD_MCE
+extern int nr_mce_banks;
+void amd_mcheck_init(struct cpuinfo_x86 *c);
+void intel_p4_mcheck_init(struct cpuinfo_x86 *c);
+void intel_p6_mcheck_init(struct cpuinfo_x86 *c);
+#endif
+
+#ifdef CONFIG_X86_ANCIENT_MCE
+void intel_p5_mcheck_init(struct cpuinfo_x86 *c);
+void winchip_mcheck_init(struct cpuinfo_x86 *c);
+static inline void enable_p5_mce(void) { mce_p5_enabled = 1; }
+#else
+static inline void intel_p5_mcheck_init(struct cpuinfo_x86 *c) {}
+static inline void winchip_mcheck_init(struct cpuinfo_x86 *c) {}
+static inline void enable_p5_mce(void) {}
+#endif
 
 void mce_setup(struct mce *m);
 void mce_log(struct mce *m);
 DECLARE_PER_CPU(struct sys_device, mce_dev);
-extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
 
 /*
  * To support more than 128 would need to escape the predefined
@@ -145,12 +169,8 @@ int mce_available(struct cpuinfo_x86 *c);
 DECLARE_PER_CPU(unsigned, mce_exception_count);
 DECLARE_PER_CPU(unsigned, mce_poll_count);
 
-void mce_log_therm_throt_event(__u64 status);
-
 extern atomic_t mce_entry;
 
-void do_machine_check(struct pt_regs *, long);
-
 typedef DECLARE_BITMAP(mce_banks_t, MAX_NR_BANKS);
 DECLARE_PER_CPU(mce_banks_t, mce_poll_banks);
 
@@ -167,13 +187,32 @@ void mce_notify_process(void);
 DECLARE_PER_CPU(struct mce, injectm);
 extern struct file_operations mce_chrdev_ops;
 
-#ifdef CONFIG_X86_MCE
-void mcheck_init(struct cpuinfo_x86 *c);
-#else
-#define mcheck_init(c) do { } while (0)
-#endif
+/*
+ * Exception handler
+ */
+
+/* Call the installed machine check handler for this CPU setup. */
+extern void (*machine_check_vector)(struct pt_regs *, long error_code);
+void do_machine_check(struct pt_regs *, long);
+
+/*
+ * Threshold handler
+ */
 
 extern void (*mce_threshold_vector)(void);
+extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
+
+/*
+ * Thermal handler
+ */
+
+void intel_init_thermal(struct cpuinfo_x86 *c);
+
+#ifdef CONFIG_X86_NEW_MCE
+void mce_log_therm_throt_event(__u64 status);
+#else
+static inline void mce_log_therm_throt_event(__u64 status) {}
+#endif
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_X86_MCE_H */

arch/x86/include/asm/therm_throt.h

-#ifndef _ASM_X86_THERM_THROT_H
-#define _ASM_X86_THERM_THROT_H
-
-#include <asm/atomic.h>
-
-extern atomic_t therm_throt_en;
-int therm_throt_process(int curr);
-
-#endif /* _ASM_X86_THERM_THROT_H */

arch/x86/kernel/cpu/mcheck/Makefile

-obj-y				=  mce.o therm_throt.o
+obj-y				=  mce.o
 
 obj-$(CONFIG_X86_NEW_MCE)	+= mce-severity.o
 obj-$(CONFIG_X86_OLD_MCE)	+= k7.o p4.o p6.o
 obj-$(CONFIG_X86_ANCIENT_MCE)	+= winchip.o p5.o
-obj-$(CONFIG_X86_MCE_P4THERMAL)	+= mce_intel.o
-obj-$(CONFIG_X86_MCE_INTEL)	+= mce_intel_64.o mce_intel.o
-obj-$(CONFIG_X86_MCE_AMD)	+= mce_amd_64.o
+obj-$(CONFIG_X86_MCE_INTEL)	+= mce_intel.o
+obj-$(CONFIG_X86_MCE_AMD)	+= mce_amd.o
 obj-$(CONFIG_X86_MCE_NONFATAL)	+= non-fatal.o
 obj-$(CONFIG_X86_MCE_THRESHOLD) += threshold.o
 obj-$(CONFIG_X86_MCE_INJECT)	+= mce-inject.o
+
+obj-$(CONFIG_X86_THERMAL_VECTOR) += therm_throt.o

arch/x86/kernel/cpu/mcheck/k7.c

@@ -10,10 +10,9 @@
 
 #include <asm/processor.h>
 #include <asm/system.h>
+#include <asm/mce.h>
 #include <asm/msr.h>
 
-#include "mce.h"
-
 /* Machine Check Handler For AMD Athlon/Duron: */
 static void k7_machine_check(struct pt_regs *regs, long error_code)
 {

arch/x86/kernel/cpu/mcheck/mce.h

-#include <linux/init.h>
-#include <asm/mce.h>
-
-#ifdef CONFIG_X86_OLD_MCE
-void amd_mcheck_init(struct cpuinfo_x86 *c);
-void intel_p4_mcheck_init(struct cpuinfo_x86 *c);
-void intel_p6_mcheck_init(struct cpuinfo_x86 *c);
-#endif
-
-#ifdef CONFIG_X86_ANCIENT_MCE
-void intel_p5_mcheck_init(struct cpuinfo_x86 *c);
-void winchip_mcheck_init(struct cpuinfo_x86 *c);
-extern int mce_p5_enable;
-static inline int mce_p5_enabled(void) { return mce_p5_enable; }
-static inline void enable_p5_mce(void) { mce_p5_enable = 1; }
-#else
-static inline void intel_p5_mcheck_init(struct cpuinfo_x86 *c) {}
-static inline void winchip_mcheck_init(struct cpuinfo_x86 *c) {}
-static inline int mce_p5_enabled(void) { return 0; }
-static inline void enable_p5_mce(void) { }
-#endif
-
-/* Call the installed machine check handler for this CPU setup. */
-extern void (*machine_check_vector)(struct pt_regs *, long error_code);
-
-#ifdef CONFIG_X86_OLD_MCE
-
-extern int nr_mce_banks;
-
-void intel_set_thermal_handler(void);
-
-#else
-
-static inline void intel_set_thermal_handler(void) { }
-
-#endif
-
-void intel_init_thermal(struct cpuinfo_x86 *c);

arch/x86/kernel/cpu/mcheck/mce_intel.c

 /*
- * Common code for Intel machine checks
+ * Intel specific MCE features.
+ * Copyright 2004 Zwane Mwaikambo <zwane@linuxpower.ca>
+ * Copyright (C) 2008, 2009 Intel Corporation
+ * Author: Andi Kleen
  */
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/smp.h>
 
-#include <asm/therm_throt.h>
-#include <asm/processor.h>
-#include <asm/system.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
 #include <asm/apic.h>
+#include <asm/processor.h>
 #include <asm/msr.h>
+#include <asm/mce.h>
+
+/*
+ * Support for Intel Correct Machine Check Interrupts. This allows
+ * the CPU to raise an interrupt when a corrected machine check happened.
+ * Normally we pick those up using a regular polling timer.
+ * Also supports reliable discovery of shared banks.
+ */
 
-#include "mce.h"
+static DEFINE_PER_CPU(mce_banks_t, mce_banks_owned);
 
-void intel_init_thermal(struct cpuinfo_x86 *c)
+/*
+ * cmci_discover_lock protects against parallel discovery attempts
+ * which could race against each other.
+ */
+static DEFINE_SPINLOCK(cmci_discover_lock);
+
+#define CMCI_THRESHOLD 1
+
+static int cmci_supported(int *banks)
 {
-	unsigned int cpu = smp_processor_id();
-	int tm2 = 0;
-	u32 l, h;
+	u64 cap;
+
+	if (mce_cmci_disabled || mce_ignore_ce)
+		return 0;
 
 	/*
-	 * Thermal monitoring depends on ACPI, clock modulation
-	 * and APIC as well
+	 * Vendor check is not strictly needed, but the initial
+	 * initialization is vendor keyed and this
+	 * makes sure none of the backdoors are entered otherwise.
 	 */
-	if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC) ||
-		!cpu_has(c, X86_FEATURE_APIC)) {
-		pr_debug("Thermal monitoring disabled\n");
-		return;
+	if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
+		return 0;
+	if (!cpu_has_apic || lapic_get_maxlvt() < 6)
+		return 0;
+	rdmsrl(MSR_IA32_MCG_CAP, cap);
+	*banks = min_t(unsigned, MAX_NR_BANKS, cap & 0xff);
+	return !!(cap & MCG_CMCI_P);
+}
+
+/*
+ * The interrupt handler. This is called on every event.
+ * Just call the poller directly to log any events.
+ * This could in theory increase the threshold under high load,
+ * but doesn't for now.
+ */
+static void intel_threshold_interrupt(void)
+{
+	machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned));
+	mce_notify_irq();
+}
+
+static void print_update(char *type, int *hdr, int num)
+{
+	if (*hdr == 0)
+		printk(KERN_INFO "CPU %d MCA banks", smp_processor_id());
+	*hdr = 1;
+	printk(KERN_CONT " %s:%d", type, num);
+}
+
+/*
+ * Enable CMCI (Corrected Machine Check Interrupt) for available MCE banks
+ * on this CPU. Use the algorithm recommended in the SDM to discover shared
+ * banks.
+ */
+static void cmci_discover(int banks, int boot)
+{
+	unsigned long *owned = (void *)&__get_cpu_var(mce_banks_owned);
+	unsigned long flags;
+	int hdr = 0;
+	int i;
+
+	spin_lock_irqsave(&cmci_discover_lock, flags);
+	for (i = 0; i < banks; i++) {
+		u64 val;
+
+		if (test_bit(i, owned))
+			continue;
+
+		rdmsrl(MSR_IA32_MC0_CTL2 + i, val);
+
+		/* Already owned by someone else? */
+		if (val & CMCI_EN) {
+			if (test_and_clear_bit(i, owned) || boot)
+				print_update("SHD", &hdr, i);
+			__clear_bit(i, __get_cpu_var(mce_poll_banks));
+			continue;
 		}
 
-	/*
-	 * First check if its enabled already, in which case there might
-	 * be some SMM goo which handles it, so we can't even put a handler
-	 * since it might be delivered via SMI already:
+		val |= CMCI_EN | CMCI_THRESHOLD;
+		wrmsrl(MSR_IA32_MC0_CTL2 + i, val);
+		rdmsrl(MSR_IA32_MC0_CTL2 + i, val);
+
+		/* Did the enable bit stick? -- the bank supports CMCI */
+		if (val & CMCI_EN) {
+			if (!test_and_set_bit(i, owned) || boot)
+				print_update("CMCI", &hdr, i);
+			__clear_bit(i, __get_cpu_var(mce_poll_banks));
+		} else {
+			WARN_ON(!test_bit(i, __get_cpu_var(mce_poll_banks)));
+		}
+	}
+	spin_unlock_irqrestore(&cmci_discover_lock, flags);
+	if (hdr)
+		printk(KERN_CONT "\n");
+}
+
+/*
+ * Just in case we missed an event during initialization check
+ * all the CMCI owned banks.
  */
-	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-	h = apic_read(APIC_LVTTHMR);
-	if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
-		printk(KERN_DEBUG
-		       "CPU%d: Thermal monitoring handled by SMI\n", cpu);
+void cmci_recheck(void)
+{
+	unsigned long flags;
+	int banks;
+
+	if (!mce_available(&current_cpu_data) || !cmci_supported(&banks))
 		return;
-	}
+	local_irq_save(flags);
+	machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned));
+	local_irq_restore(flags);
+}
 
-	if (cpu_has(c, X86_FEATURE_TM2) && (l & MSR_IA32_MISC_ENABLE_TM2))
-		tm2 = 1;
+/*
+ * Disable CMCI on this CPU for all banks it owns when it goes down.
+ * This allows other CPUs to claim the banks on rediscovery.
+ */
+void cmci_clear(void)
+{
+	unsigned long flags;
+	int i;
+	int banks;
+	u64 val;
 
-	/* Check whether a vector already exists */
-	if (h & APIC_VECTOR_MASK) {
-		printk(KERN_DEBUG
-		       "CPU%d: Thermal LVT vector (%#x) already installed\n",
-		       cpu, (h & APIC_VECTOR_MASK));
+	if (!cmci_supported(&banks))
 		return;
+	spin_lock_irqsave(&cmci_discover_lock, flags);
+	for (i = 0; i < banks; i++) {
+		if (!test_bit(i, __get_cpu_var(mce_banks_owned)))
+			continue;
+		/* Disable CMCI */
+		rdmsrl(MSR_IA32_MC0_CTL2 + i, val);
+		val &= ~(CMCI_EN|CMCI_THRESHOLD_MASK);
+		wrmsrl(MSR_IA32_MC0_CTL2 + i, val);
+		__clear_bit(i, __get_cpu_var(mce_banks_owned));
 	}
+	spin_unlock_irqrestore(&cmci_discover_lock, flags);
+}
 
-	/* We'll mask the thermal vector in the lapic till we're ready: */
-	h = THERMAL_APIC_VECTOR | APIC_DM_FIXED | APIC_LVT_MASKED;
-	apic_write(APIC_LVTTHMR, h);
+/*
+ * After a CPU went down cycle through all the others and rediscover
+ * Must run in process context.
+ */
+void cmci_rediscover(int dying)
+{
+	int banks;
+	int cpu;
+	cpumask_var_t old;
 
-	rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
-	wrmsr(MSR_IA32_THERM_INTERRUPT,
-		l | (THERM_INT_LOW_ENABLE | THERM_INT_HIGH_ENABLE), h);
+	if (!cmci_supported(&banks))
+		return;
+	if (!alloc_cpumask_var(&old, GFP_KERNEL))
+		return;
+	cpumask_copy(old, &current->cpus_allowed);
+
+	for_each_online_cpu(cpu) {
+		if (cpu == dying)
+			continue;
+		if (set_cpus_allowed_ptr(current, cpumask_of(cpu)))
+			continue;
+		/* Recheck banks in case CPUs don't all have the same */
+		if (cmci_supported(&banks))
+			cmci_discover(banks, 0);
+	}
 
-	intel_set_thermal_handler();
+	set_cpus_allowed_ptr(current, old);
+	free_cpumask_var(old);
+}
+
+/*
+ * Reenable CMCI on this CPU in case a CPU down failed.
+ */
+void cmci_reenable(void)
+{
+	int banks;
+	if (cmci_supported(&banks))
+		cmci_discover(banks, 0);
+}
 
-	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-	wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h);
+static void intel_init_cmci(void)
+{
+	int banks;
 
-	/* Unmask the thermal vector: */
-	l = apic_read(APIC_LVTTHMR);
-	apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
+	if (!cmci_supported(&banks))
+		return;
 
-	printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n",
-	       cpu, tm2 ? "TM2" : "TM1");
+	mce_threshold_vector = intel_threshold_interrupt;
+	cmci_discover(banks, 1);
+	/*
+	 * For CPU #0 this runs with still disabled APIC, but that's
+	 * ok because only the vector is set up. We still do another
+	 * check for the banks later for CPU #0 just to make sure
+	 * to not miss any events.
+	 */
+	apic_write(APIC_LVTCMCI, THRESHOLD_APIC_VECTOR|APIC_DM_FIXED);
+	cmci_recheck();
+}
 
-	/* enable thermal throttle processing */
-	atomic_set(&therm_throt_en, 1);
+void mce_intel_feature_init(struct cpuinfo_x86 *c)
+{
+	intel_init_thermal(c);
+	intel_init_cmci();
 }

arch/x86/kernel/cpu/mcheck/mce_intel_64.c

-/*
- * Intel specific MCE features.
- * Copyright 2004 Zwane Mwaikambo <zwane@linuxpower.ca>
- * Copyright (C) 2008, 2009 Intel Corporation
- * Author: Andi Kleen
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/percpu.h>
-#include <asm/processor.h>
-#include <asm/apic.h>
-#include <asm/msr.h>
-#include <asm/mce.h>
-#include <asm/hw_irq.h>
-#include <asm/idle.h>
-#include <asm/therm_throt.h>
-
-#include "mce.h"
-
-asmlinkage void smp_thermal_interrupt(void)
-{
-	__u64 msr_val;
-
-	ack_APIC_irq();
-
-	exit_idle();
-	irq_enter();
-
-	rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
-	if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT))
-		mce_log_therm_throt_event(msr_val);
-
-	inc_irq_stat(irq_thermal_count);
-	irq_exit();
-}
-
-/*
- * Support for Intel Correct Machine Check Interrupts. This allows
- * the CPU to raise an interrupt when a corrected machine check happened.
- * Normally we pick those up using a regular polling timer.
- * Also supports reliable discovery of shared banks.
- */
-
-static DEFINE_PER_CPU(mce_banks_t, mce_banks_owned);
-
-/*
- * cmci_discover_lock protects against parallel discovery attempts
- * which could race against each other.
- */
-static DEFINE_SPINLOCK(cmci_discover_lock);
-
-#define CMCI_THRESHOLD 1
-
-static int cmci_supported(int *banks)
-{
-	u64 cap;
-
-	if (mce_cmci_disabled || mce_ignore_ce)
-		return 0;
-
-	/*
-	 * Vendor check is not strictly needed, but the initial
-	 * initialization is vendor keyed and this
-	 * makes sure none of the backdoors are entered otherwise.
-	 */
-	if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
-		return 0;
-	if (!cpu_has_apic || lapic_get_maxlvt() < 6)
-		return 0;
-	rdmsrl(MSR_IA32_MCG_CAP, cap);
-	*banks = min_t(unsigned, MAX_NR_BANKS, cap & 0xff);
-	return !!(cap & MCG_CMCI_P);
-}
-
-/*
- * The interrupt handler. This is called on every event.
- * Just call the poller directly to log any events.
- * This could in theory increase the threshold under high load,
- * but doesn't for now.
- */
-static void intel_threshold_interrupt(void)
-{
-	machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned));
-	mce_notify_irq();
-}
-
-static void print_update(char *type, int *hdr, int num)
-{
-	if (*hdr == 0)
-		printk(KERN_INFO "CPU %d MCA banks", smp_processor_id());
-	*hdr = 1;
-	printk(KERN_CONT " %s:%d", type, num);
-}
-
-/*
- * Enable CMCI (Corrected Machine Check Interrupt) for available MCE banks
- * on this CPU. Use the algorithm recommended in the SDM to discover shared
- * banks.
- */
-static void cmci_discover(int banks, int boot)
-{
-	unsigned long *owned = (void *)&__get_cpu_var(mce_banks_owned);
-	unsigned long flags;
-	int hdr = 0;
-	int i;
-
-	spin_lock_irqsave(&cmci_discover_lock, flags);
-	for (i = 0; i < banks; i++) {
-		u64 val;
-
-		if (test_bit(i, owned))
-			continue;
-
-		rdmsrl(MSR_IA32_MC0_CTL2 + i, val);
-
-		/* Already owned by someone else? */
-		if (val & CMCI_EN) {
-			if (test_and_clear_bit(i, owned) || boot)
-				print_update("SHD", &hdr, i);
-			__clear_bit(i, __get_cpu_var(mce_poll_banks));
-			continue;
-		}
-
-		val |= CMCI_EN | CMCI_THRESHOLD;
-		wrmsrl(MSR_IA32_MC0_CTL2 + i, val);
-		rdmsrl(MSR_IA32_MC0_CTL2 + i, val);
-
-		/* Did the enable bit stick? -- the bank supports CMCI */
-		if (val & CMCI_EN) {
-			if (!test_and_set_bit(i, owned) || boot)
-				print_update("CMCI", &hdr, i);
-			__clear_bit(i, __get_cpu_var(mce_poll_banks));
-		} else {
-			WARN_ON(!test_bit(i, __get_cpu_var(mce_poll_banks)));
-		}
-	}
-	spin_unlock_irqrestore(&cmci_discover_lock, flags);
-	if (hdr)
-		printk(KERN_CONT "\n");
-}
-
-/*
- * Just in case we missed an event during initialization check
- * all the CMCI owned banks.
- */
-void cmci_recheck(void)
-{
-	unsigned long flags;
-	int banks;
-
-	if (!mce_available(&current_cpu_data) || !cmci_supported(&banks))
-		return;
-	local_irq_save(flags);
-	machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned));
-	local_irq_restore(flags);
-}
-
-/*
- * Disable CMCI on this CPU for all banks it owns when it goes down.
- * This allows other CPUs to claim the banks on rediscovery.
- */
-void cmci_clear(void)
-{
-	unsigned long flags;
-	int i;
-	int banks;
-	u64 val;
-
-	if (!cmci_supported(&banks))
-		return;
-	spin_lock_irqsave(&cmci_discover_lock, flags);
-	for (i = 0; i < banks; i++) {
-		if (!test_bit(i, __get_cpu_var(mce_banks_owned)))
-			continue;
-		/* Disable CMCI */
-		rdmsrl(MSR_IA32_MC0_CTL2 + i, val);
-		val &= ~(CMCI_EN|CMCI_THRESHOLD_MASK);
-		wrmsrl(MSR_IA32_MC0_CTL2 + i, val);
-		__clear_bit(i, __get_cpu_var(mce_banks_owned));
-	}
-	spin_unlock_irqrestore(&cmci_discover_lock, flags);
-}
-
-/*
- * After a CPU went down cycle through all the others and rediscover
- * Must run in process context.
- */
-void cmci_rediscover(int dying)
-{
-	int banks;
-	int cpu;
-	cpumask_var_t old;
-
-	if (!cmci_supported(&banks))
-		return;
-	if (!alloc_cpumask_var(&old, GFP_KERNEL))
-		return;
-	cpumask_copy(old, &current->cpus_allowed);
-
-	for_each_online_cpu(cpu) {
-		if (cpu == dying)
-			continue;
-		if (set_cpus_allowed_ptr(current, cpumask_of(cpu)))
-			continue;
-		/* Recheck banks in case CPUs don't all have the same */
-		if (cmci_supported(&banks))
-			cmci_discover(banks, 0);
-	}
-
-	set_cpus_allowed_ptr(current, old);
-	free_cpumask_var(old);
-}
-
-/*
- * Reenable CMCI on this CPU in case a CPU down failed.
- */
-void cmci_reenable(void)
-{
-	int banks;
-	if (cmci_supported(&banks))
-		cmci_discover(banks, 0);
-}
-
-static void intel_init_cmci(void)
-{
-	int banks;
-
-	if (!cmci_supported(&banks))
-		return;
-
-	mce_threshold_vector = intel_threshold_interrupt;
-	cmci_discover(banks, 1);
-	/*
-	 * For CPU #0 this runs with still disabled APIC, but that's
-	 * ok because only the vector is set up. We still do another
-	 * check for the banks later for CPU #0 just to make sure
-	 * to not miss any events.
-	 */
-	apic_write(APIC_LVTCMCI, THRESHOLD_APIC_VECTOR|APIC_DM_FIXED);
-	cmci_recheck();
-}
-
-void mce_intel_feature_init(struct cpuinfo_x86 *c)
-{
-	intel_init_thermal(c);
-	intel_init_cmci();
-}

arch/x86/kernel/cpu/mcheck/non-fatal.c

@@ -17,10 +17,9 @@
 
 #include <asm/processor.h>
 #include <asm/system.h>
+#include <asm/mce.h>
 #include <asm/msr.h>
 
-#include "mce.h"
-
 static int		firstbank;
 
 #define MCE_RATE	(15*HZ)	/* timer rate is 15s */

arch/x86/kernel/cpu/mcheck/p4.c

 /*
  * P4 specific Machine Check Exception Reporting
  */
-
-#include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/smp.h>
 
-#include <asm/therm_throt.h>
 #include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/apic.h>
+#include <asm/mce.h>
 #include <asm/msr.h>
 
-#include "mce.h"
-
 /* as supported by the P4/Xeon family */
 struct intel_mce_extended_msrs {
 	u32 eax;
@@ -33,46 +27,6 @@ struct intel_mce_extended_msrs {
 
 static int mce_num_extended_msrs;
 
-
-#ifdef CONFIG_X86_MCE_P4THERMAL
-
-static void unexpected_thermal_interrupt(struct pt_regs *regs)
-{
-	printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n",
-			smp_processor_id());
-	add_taint(TAINT_MACHINE_CHECK);
-}
-
-/* P4/Xeon Thermal transition interrupt handler: */
-static void intel_thermal_interrupt(struct pt_regs *regs)
-{
-	__u64 msr_val;
-
-	ack_APIC_irq();
-
-	rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
-	therm_throt_process(msr_val & THERM_STATUS_PROCHOT);
-}
-
-/* Thermal interrupt handler for this CPU setup: */
-static void (*vendor_thermal_interrupt)(struct pt_regs *regs) =
-						unexpected_thermal_interrupt;
-
-void smp_thermal_interrupt(struct pt_regs *regs)
-{
-	irq_enter();
-	vendor_thermal_interrupt(regs);
-	__get_cpu_var(irq_stat).irq_thermal_count++;
-	irq_exit();
-}
-
-void intel_set_thermal_handler(void)
-{
-	vendor_thermal_interrupt = intel_thermal_interrupt;
-}
-
-#endif /* CONFIG_X86_MCE_P4THERMAL */
-
 /* P4/Xeon Extended MCE MSR retrieval, return 0 if unsupported */
 static void intel_get_extended_msrs(struct intel_mce_extended_msrs *r)
 {

arch/x86/kernel/cpu/mcheck/p5.c

@@ -10,12 +10,11 @@
 
 #include <asm/processor.h>
 #include <asm/system.h>
+#include <asm/mce.h>
 #include <asm/msr.h>
 
-#include "mce.h"
-
 /* By default disabled */
-int		mce_p5_enable;
+int mce_p5_enabled __read_mostly;
 
 /* Machine check handler for Pentium class Intel CPUs: */
 static void pentium_machine_check(struct pt_regs *regs, long error_code)
@@ -43,15 +42,13 @@ void intel_p5_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
 
-	/* Check for MCE support: */
-	if (!cpu_has(c, X86_FEATURE_MCE))
+	/* Default P5 to off as its often misconnected: */
+	if (!mce_p5_enabled)
 		return;
 
-#ifdef CONFIG_X86_OLD_MCE
-	/* Default P5 to off as its often misconnected: */
-	if (mce_disabled != -1)
+	/* Check for MCE support: */
+	if (!cpu_has(c, X86_FEATURE_MCE))
 		return;
-#endif
 
 	machine_check_vector = pentium_machine_check;
 	/* Make sure the vector pointer is visible before we enable MCEs: */

arch/x86/kernel/cpu/mcheck/p6.c

@@ -10,10 +10,9 @@
 
 #include <asm/processor.h>
 #include <asm/system.h>
+#include <asm/mce.h>
 #include <asm/msr.h>
 
-#include "mce.h"
-
 /* Machine Check Handler For PII/PIII */
 static void intel_machine_check(struct pt_regs *regs, long error_code)
 {

arch/x86/kernel/cpu/mcheck/therm_throt.c

@@ -13,13 +13,23 @@
  * Credits: Adapted from Zwane Mwaikambo's original code in mce_intel.c.
  *          Inspired by Ross Biro's and Al Borchers' counter code.
  */
+#include <linux/interrupt.h>
 #include <linux/notifier.h>
 #include <linux/jiffies.h>
+#include <linux/kernel.h>
 #include <linux/percpu.h>
 #include <linux/sysdev.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/smp.h>
 #include <linux/cpu.h>
 
-#include <asm/therm_throt.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/apic.h>
+#include <asm/idle.h>
+#include <asm/mce.h>
+#include <asm/msr.h>
 
 /* How long to wait between reporting thermal events */
 #define CHECK_INTERVAL		(300 * HZ)
@@ -27,7 +37,7 @@
 static DEFINE_PER_CPU(__u64, next_check) = INITIAL_JIFFIES;
 static DEFINE_PER_CPU(unsigned long, thermal_throttle_count);
 
-atomic_t therm_throt_en		= ATOMIC_INIT(0);
+static atomic_t therm_throt_en		= ATOMIC_INIT(0);
 
 #ifdef CONFIG_SYSFS
 #define define_therm_throt_sysdev_one_ro(_name)				\
@@ -82,7 +92,7 @@ static struct attribute_group thermal_throttle_attr_group = {
  *          1 : Event should be logged further, and a message has been
  *              printed to the syslog.
  */
-int therm_throt_process(int curr)
+static int therm_throt_process(int curr)
 {
 	unsigned int cpu = smp_processor_id();
 	__u64 tmp_jiffs = get_jiffies_64();
@@ -186,6 +196,94 @@ static __init int thermal_throttle_init_device(void)
 
 	return 0;
 }
-
 device_initcall(thermal_throttle_init_device);
+
 #endif /* CONFIG_SYSFS */
+
+/* Thermal transition interrupt handler */
+static void intel_thermal_interrupt(void)
+{
+	__u64 msr_val;
+
+	rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
+	if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT))
+		mce_log_therm_throt_event(msr_val);
+}
+
+static void unexpected_thermal_interrupt(void)
+{
+	printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n",
+			smp_processor_id());
+	add_taint(TAINT_MACHINE_CHECK);
+}
+
+static void (*smp_thermal_vector)(void) = unexpected_thermal_interrupt;
+
+asmlinkage void smp_thermal_interrupt(struct pt_regs *regs)
+{
+	exit_idle();
+	irq_enter();
+	inc_irq_stat(irq_thermal_count);
+	smp_thermal_vector();
+	irq_exit();
+	/* Ack only at the end to avoid potential reentry */
+	ack_APIC_irq();
+}
+
+void intel_init_thermal(struct cpuinfo_x86 *c)
+{
+	unsigned int cpu = smp_processor_id();
+	int tm2 = 0;
+	u32 l, h;
+
+	/* Thermal monitoring depends on ACPI and clock modulation*/
+	if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC))
+		return;
+
+	/*
+	 * First check if its enabled already, in which case there might
+	 * be some SMM goo which handles it, so we can't even put a handler
+	 * since it might be delivered via SMI already:
+	 */
+	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+	h = apic_read(APIC_LVTTHMR);
+	if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
+		printk(KERN_DEBUG
+		       "CPU%d: Thermal monitoring handled by SMI\n", cpu);
+		return;
+	}
+
+	if (cpu_has(c, X86_FEATURE_TM2) && (l & MSR_IA32_MISC_ENABLE_TM2))
+		tm2 = 1;
+
+	/* Check whether a vector already exists */
+	if (h & APIC_VECTOR_MASK) {
+		printk(KERN_DEBUG
+		       "CPU%d: Thermal LVT vector (%#x) already installed\n",
+		       cpu, (h & APIC_VECTOR_MASK));
+		return;
+	}
+
+	/* We'll mask the thermal vector in the lapic till we're ready: */
+	h = THERMAL_APIC_VECTOR | APIC_DM_FIXED | APIC_LVT_MASKED;
+	apic_write(APIC_LVTTHMR, h);
+
+	rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
+	wrmsr(MSR_IA32_THERM_INTERRUPT,
+		l | (THERM_INT_LOW_ENABLE | THERM_INT_HIGH_ENABLE), h);
+
+	smp_thermal_vector = intel_thermal_interrupt;
+
+	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+	wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h);
+
+	/* Unmask the thermal vector: */
+	l = apic_read(APIC_LVTTHMR);
+	apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
+
+	printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n",
+	       cpu, tm2 ? "TM2" : "TM1");
+
+	/* enable thermal throttle processing */
+	atomic_set(&therm_throt_en, 1);
+}

arch/x86/kernel/cpu/mcheck/winchip.c

@@ -9,10 +9,9 @@
 
 #include <asm/processor.h>
 #include <asm/system.h>
+#include <asm/mce.h>
 #include <asm/msr.h>
 
-#include "mce.h"
-
 /* Machine check handler for WinChip C6: */
 static void winchip_machine_check(struct pt_regs *regs, long error_code)
 {

arch/x86/kernel/traps.c

@@ -53,6 +53,7 @@
 #include <asm/traps.h>
 #include <asm/desc.h>
 #include <asm/i387.h>
+#include <asm/mce.h>
 
 #include <asm/mach_traps.h>
 
@@ -64,8 +65,6 @@
 #include <asm/setup.h>
 #include <asm/traps.h>
 
-#include "cpu/mcheck/mce.h"
-
 asmlinkage int system_call(void);
 
 /* Do we ignore FPU interrupts ? */