USB: Generalize usb initialization for omap hw

Create a generic board-file for initializing usb
on omap2430 and omap3 boards.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/Makefile

@@ -29,11 +29,13 @@ obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o board-h4-mmc.o
 obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o \
 					   board-2430sdp-flash.o \
 					   board-sdp-hsmmc.o \
-					   board-2430sdp-usb.o
+					   usb-musb.o \
+					   usb-ehci.o
 obj-$(CONFIG_MACH_OMAP_2430OSK)		+= board-2430osk.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
 					   board-sdp-hsmmc.o \
-					   board-3430sdp-usb.o \
+					   usb-musb.o \
+					   usb-ehci.o \
 					   board-3430sdp-flash.o
 obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o
 obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o \

arch/arm/mach-omap2/board-2430sdp.c

@@ -35,6 +35,8 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/board.h>
+#include <asm/arch/usb-musb.h>
+#include <asm/arch/usb-ehci.h>
 #include <asm/arch/common.h>
 #include <asm/arch/keypad.h>
 #include <asm/arch/gpmc.h>
@@ -390,7 +392,8 @@ static void __init omap_2430sdp_init(void)
 	omap_serial_init();
 
 	sdp2430_flash_init();
-	sdp2430_usb_init();
+	usb_musb_init();
+	usb_ehci_init();
 
 	spi_register_board_info(sdp2430_spi_board_info,
 				ARRAY_SIZE(sdp2430_spi_board_info));

arch/arm/mach-omap2/board-3430sdp.c

@@ -33,6 +33,8 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/board.h>
+#include <asm/arch/usb-musb.h>
+#include <asm/arch/usb-ehci.h>
 #include <asm/arch/common.h>
 #include <asm/arch/keypad.h>
 #include <asm/arch/dma.h>
@@ -297,7 +299,8 @@ static void __init omap_3430sdp_init(void)
 	ads7846_dev_init();
 	sdp3430_flash_init();
 	omap_serial_init();
-	sdp3430_usb_init();
+	usb_musb_init();
+	usb_ehci_init();
 	sdp_mmc_init();
 }
 

arch/arm/mach-omap2/board-3430sdp-usb.c → arch/arm/mach-omap2/usb-ehci.c

 /*
- * linux/arch/arm/mach-omap2/board-3430sdp-usb.c
+ * linux/arch/arm/mach-omap2/usb-ehci.c
  *
  * This file will contain the board specific details for the
- * MENTOR USB OTG and Synopsys EHCI host controllers on OMAP3430
+ * Synopsys EHCI host controller on OMAP3430
  *
- * Copyright (C) 2007 Texas Instruments
- * Author: Vikram Pandita
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Felipe Balbi <felipe.balbi@nokia.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -25,77 +25,6 @@
 #include <asm/arch/pm.h>
 #include <asm/arch/usb.h>
 
-#ifdef CONFIG_USB_MUSB_SOC
-static struct resource musb_resources[] = {
-	[0] = {
-		.start	= OMAP34XX_HSUSB_OTG_BASE,
-		.end	= OMAP34XX_HSUSB_OTG_BASE + SZ_8K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {	/* general IRQ */
-		.start	= INT_243X_HS_USB_MC,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {	/* DMA IRQ */
-		.start	= INT_243X_HS_USB_DMA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static int hsotgusb_ick_on;
-
-static int musb_set_clock(struct clk *clk, int state)
-{
-	if (state) {
-		if (hsotgusb_ick_on > 0)
-			return -ENODEV;
-
-		omap2_block_sleep();
-		clk_enable(clk);
-		hsotgusb_ick_on = 1;
-	} else {
-		if (hsotgusb_ick_on == 0)
-			return -ENODEV;
-
-		clk_disable(clk);
-		hsotgusb_ick_on = 0;
-		omap2_allow_sleep();
-	}
-
-	return 0;
-}
-
-static struct musb_hdrc_platform_data musb_plat = {
-#ifdef CONFIG_USB_MUSB_OTG
-	.mode		= MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
-	.mode		= MUSB_HOST,
-#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
-	.mode		= MUSB_PERIPHERAL,
-#endif
-	.multipoint	= 1,
-	.clock		= "hsotgusb_ick",
-	.set_clock	= musb_set_clock,
-};
-
-static u64 musb_dmamask = ~(u32)0;
-
-static struct platform_device musb_device = {
-	.name		= "musb_hdrc",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &musb_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &musb_plat,
-	},
-	.num_resources	= ARRAY_SIZE(musb_resources),
-	.resource	= musb_resources,
-};
-#endif
-
-
-/* EHCI platform specific data */
-
 #if	defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
 static struct resource ehci_resources[] = {
 	[0] = {
@@ -217,18 +146,11 @@ static void setup_ehci_io_mux(void)
 
 #endif /* EHCI specific data */
 
-void __init sdp3430_usb_init(void)
+void __init usb_ehci_init(void)
 {
-#ifdef CONFIG_USB_MUSB_SOC
-	if (platform_device_register(&musb_device) < 0) {
-		printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
-		return;
-	}
-#endif
-
 #if     defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
-
 	/* Setup Pin IO MUX for EHCI */
+	if (cpu_is_omap34xx())
 		setup_ehci_io_mux();
 
 	if (platform_device_register(&ehci_device) < 0) {
@@ -236,6 +158,5 @@ void __init sdp3430_usb_init(void)
 		return;
 	}
 #endif
-
 }
 

arch/arm/mach-omap2/board-2430sdp-usb.c → arch/arm/mach-omap2/usb-musb.c

 /*
- * linux/arch/arm/mach-omap2/board-2430sdp-usb.c
+ * linux/arch/arm/mach-omap2/usb-musb.c
  *
- * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com>
- * Author: Kevin Hilman
+ * This file will contain the board specific details for the
+ * MENTOR USB OTG controller on OMAP3430
+ *
+ * Copyright (C) 2007-2008 Texas Instruments
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Vikram Pandita
+ *
+ * Generalization by:
+ * Felipe Balbi <felipe.balbi@nokia.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -14,16 +21,23 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <asm/io.h>
+#include <asm/arch/mux.h>
 #include <linux/usb/musb.h>
 
 #include <asm/arch/hardware.h>
 #include <asm/arch/pm.h>
 #include <asm/arch/usb.h>
 
+#ifdef CONFIG_USB_MUSB_SOC
 static struct resource musb_resources[] = {
 	[0] = {
-		.start	= OMAP243X_HS_BASE,
-		.end	= OMAP243X_HS_BASE + SZ_8K - 1,
+		.start	= cpu_is_omap34xx()
+			? OMAP34XX_HSUSB_OTG_BASE
+			: OMAP243X_HS_BASE,
+		.end	= cpu_is_omap34xx()
+			? OMAP34XX_HSUSB_OTG_BASE + SZ_8K - 1
+			: OMAP243X_HS_BASE + SZ_8K -1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {	/* general IRQ */
@@ -36,23 +50,23 @@ static struct resource musb_resources[] = {
 	},
 };
 
-static int usbhs_ick_on;
+static int clk_on;
 
 static int musb_set_clock(struct clk *clk, int state)
 {
 	if (state) {
-               if (usbhs_ick_on > 0)
+		if (clk_on > 0)
 			return -ENODEV;
 
 		omap2_block_sleep();
 		clk_enable(clk);
-               usbhs_ick_on = 1;
+		clk_on = 1;
 	} else {
-               if (usbhs_ick_on == 0)
+		if (clk_on == 0)
 			return -ENODEV;
 
 		clk_disable(clk);
-               usbhs_ick_on = 0;
+		clk_on = 0;
 		omap2_allow_sleep();
 	}
 
@@ -68,7 +82,9 @@ static struct musb_hdrc_platform_data musb_plat = {
 	.mode		= MUSB_PERIPHERAL,
 #endif
 	.multipoint	= 1,
-	.clock		= "usbhs_ick",
+	.clock		= cpu_is_omap34xx()
+			? "hsotgusb_ick"
+			: "usbhs_ick",
 	.set_clock	= musb_set_clock,
 };
 
@@ -85,12 +101,16 @@ static struct platform_device musb_device = {
 	.num_resources	= ARRAY_SIZE(musb_resources),
 	.resource	= musb_resources,
 };
+#endif
 
-void __init sdp2430_usb_init(void)
+
+void __init usb_musb_init(void)
 {
+#ifdef CONFIG_USB_MUSB_SOC
 	if (platform_device_register(&musb_device) < 0) {
 		printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
 		return;
 	}
+#endif
 }
 

include/asm-arm/arch-omap/usb-ehci.h

+/*
+ * linux/include/asm-arm/arch-omap/usb-ehci.h
+ *
+ * Hardware definitions for Synopsys EHCI host controller.
+ *
+ * Initial creation by Felipe Balbi.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_USB_EHCI_H
+#define __ASM_ARCH_OMAP_USB_EHCI_H
+
+extern void usb_ehci_init(void);
+
+#endif /* __ASM_ARCH_OMAP_USB_EHCI_H */
+

include/asm-arm/arch-omap/usb-musb.h

+/*
+ * linux/include/asm-arm/arch-omap/usb-musb.h
+ *
+ * Hardware definitions for Mentor Graphics MUSBMHDRC.
+ *
+ * Initial creation by Felipe Balbi.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_USB_MUSB_H
+#define __ASM_ARCH_OMAP_USB_MUSB_H
+
+extern void usb_musb_init(void);
+
+#endif /* __ASM_ARCH_OMAP_USB_MUSB_H */
+