drm/i915: Make driver less chatty

Convert many printk calls to DRM_DEBUG calls to reduce kernel log noise
for normal activities. Switch other printk calls to DRM_ERROR or DRM_INFO.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

drivers/gpu/drm/i915/i915_dma.c

@@ -846,7 +846,7 @@ static int i915_set_status_page(struct drm_device *dev, void *data,
 		return 0;
 	}
 
-	printk(KERN_DEBUG "set status page addr 0x%08x\n", (u32)hws->addr);
+	DRM_DEBUG("set status page addr 0x%08x\n", (u32)hws->addr);
 
 	dev_priv->status_gfx_addr = hws->addr & (0x1ffff<<12);
 

drivers/gpu/drm/i915/i915_drv.c

@@ -57,8 +57,8 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
 	if (!dev || !dev_priv) {
-		printk(KERN_ERR "dev: %p, dev_priv: %p\n", dev, dev_priv);
-		printk(KERN_ERR "DRM not initialized, aborting suspend.\n");
+		DRM_ERROR("dev: %p, dev_priv: %p\n", dev, dev_priv);
+		DRM_ERROR("DRM not initialized, aborting suspend.\n");
 		return -ENODEV;
 	}
 

drivers/gpu/drm/i915/intel_dp.c

@@ -246,7 +246,7 @@ intel_dp_aux_ch(struct intel_output *intel_output,
 	}
 
 	if ((status & DP_AUX_CH_CTL_DONE) == 0) {
-		printk(KERN_ERR "dp_aux_ch not done status 0x%08x\n", status);
+		DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status);
 		return -EBUSY;
 	}
 
@@ -254,11 +254,14 @@ intel_dp_aux_ch(struct intel_output *intel_output,
 	 * Timeouts occur when the sink is not connected
 	 */
 	if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
-		printk(KERN_ERR "dp_aux_ch receive error status 0x%08x\n", status);
+		DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status);
 		return -EIO;
 	}
+
+	/* Timeouts occur when the device isn't connected, so they're
+	 * "normal" -- don't fill the kernel log with these */
 	if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) {
-		printk(KERN_ERR "dp_aux_ch timeout status 0x%08x\n", status);
+		DRM_DEBUG("dp_aux_ch timeout status 0x%08x\n", status);
 		return -ETIMEDOUT;
 	}
 
@@ -411,7 +414,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
 				dp_priv->link_bw = bws[clock];
 				dp_priv->lane_count = lane_count;
 				adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw);
-				printk(KERN_ERR "link bw %02x lane count %d clock %d\n",
+				DRM_DEBUG("Display port link bw %02x lane count %d clock %d\n",
 				       dp_priv->link_bw, dp_priv->lane_count,
 				       adjusted_mode->clock);
 				return true;

drivers/gpu/drm/i915/intel_dp_i2c.c

@@ -29,6 +29,7 @@
 #include <linux/sched.h>
 #include <linux/i2c.h>
 #include "intel_dp.h"
+#include "drmP.h"
 
 /* Run a single AUX_CH I2C transaction, writing/reading data as necessary */
 
@@ -84,7 +85,7 @@ i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode,
 					   msg, msg_bytes,
 					   reply, reply_bytes);
 		if (ret < 0) {
-			printk(KERN_ERR "aux_ch failed %d\n", ret);
+			DRM_DEBUG("aux_ch failed %d\n", ret);
 			return ret;
 		}
 		switch (reply[0] & AUX_I2C_REPLY_MASK) {
@@ -94,14 +95,14 @@ i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode,
 			}
 			return reply_bytes - 1;
 		case AUX_I2C_REPLY_NACK:
-			printk(KERN_ERR "aux_ch nack\n");
+			DRM_DEBUG("aux_ch nack\n");
 			return -EREMOTEIO;
 		case AUX_I2C_REPLY_DEFER:
-			printk(KERN_ERR "aux_ch defer\n");
+			DRM_DEBUG("aux_ch defer\n");
 			udelay(100);
 			break;
 		default:
-			printk(KERN_ERR "aux_ch invalid reply 0x%02x\n", reply[0]);
+			DRM_ERROR("aux_ch invalid reply 0x%02x\n", reply[0]);
 			return -EREMOTEIO;
 		}
 	}
@@ -223,7 +224,7 @@ i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter,
 	if (ret >= 0)
 		ret = num;
 	i2c_algo_dp_aux_stop(adapter, reading);
-	printk(KERN_ERR "dp_aux_xfer return %d\n", ret);
+	DRM_DEBUG("dp_aux_xfer return %d\n", ret);
 	return ret;
 }
 

drivers/gpu/drm/i915/intel_fb.c

@@ -453,7 +453,7 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width,
 	size = ALIGN(size, PAGE_SIZE);
 	fbo = drm_gem_object_alloc(dev, size);
 	if (!fbo) {
-		printk(KERN_ERR "failed to allocate framebuffer\n");
+		DRM_ERROR("failed to allocate framebuffer\n");
 		ret = -ENOMEM;
 		goto out;
 	}
@@ -610,7 +610,7 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width,
 	par->dev = dev;
 
 	/* To allow resizeing without swapping buffers */
-	printk("allocated %dx%d fb: 0x%08x, bo %p\n", intel_fb->base.width,
+	DRM_DEBUG("allocated %dx%d fb: 0x%08x, bo %p\n", intel_fb->base.width,
 		  intel_fb->base.height, obj_priv->gtt_offset, fbo);
 
 	mutex_unlock(&dev->struct_mutex);
@@ -698,13 +698,13 @@ static int intelfb_multi_fb_probe_crtc(struct drm_device *dev, struct drm_crtc *
 	} else
 		intelfb_set_par(info);
 
-	printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
+	DRM_INFO("fb%d: %s frame buffer device\n", info->node,
 	       info->fix.id);
 
 	/* Switch back to kernel console on panic */
 	kernelfb_mode = *modeset;
 	atomic_notifier_chain_register(&panic_notifier_list, &paniced);
-	printk(KERN_INFO "registered panic notifier\n");
+	DRM_DEBUG("registered panic notifier\n");
 
 	return 0;
 }
@@ -852,13 +852,13 @@ static int intelfb_single_fb_probe(struct drm_device *dev)
 	} else
 		intelfb_set_par(info);
 
-	printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
+	DRM_INFO("fb%d: %s frame buffer device\n", info->node,
 	       info->fix.id);
 
 	/* Switch back to kernel console on panic */
 	kernelfb_mode = *modeset;
 	atomic_notifier_chain_register(&panic_notifier_list, &paniced);
-	printk(KERN_INFO "registered panic notifier\n");
+	DRM_DEBUG("registered panic notifier\n");
 
 	return 0;
 }
@@ -872,7 +872,7 @@ void intelfb_restore(void)
 {
 	int ret;
 	if ((ret = drm_crtc_helper_set_config(&kernelfb_mode)) != 0) {
-		printk(KERN_ERR "Failed to restore crtc configuration: %d\n",
+		DRM_ERROR("Failed to restore crtc configuration: %d\n",
 			  ret);
 	}
 }

drivers/gpu/drm/i915/intel_lvds.c

@@ -252,14 +252,14 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
 
 	/* Should never happen!! */
 	if (!IS_I965G(dev) && intel_crtc->pipe == 0) {
-		printk(KERN_ERR "Can't support LVDS on pipe A\n");
+		DRM_ERROR("Can't support LVDS on pipe A\n");
 		return false;
 	}
 
 	/* Should never happen!! */
 	list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, head) {
 		if (tmp_encoder != encoder && tmp_encoder->crtc == encoder->crtc) {
-			printk(KERN_ERR "Can't enable LVDS and another "
+			DRM_ERROR("Can't enable LVDS and another "
 			       "encoder on the same pipe\n");
 			return false;
 		}