Merge git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  avr32: Fix build failures in board code
  avr32: Allow selecting multiple pins at once
  avr32: Minor pm_power_off cleanup
  avr32: Implement {read,write}[bwl]_be
  avr32: Replace static clock list with dynamic linked list
  avr32: Use platform_driver_probe for pdc platform driver
  avr32: Use platform_driver_probe for pio platform driver
  avr32: Provide a way to deselect pins in the portmux
  ngw100: export J15 through sysfs
  avr32: Allow fine-grained control over LCDC pins
  avr32: added mem kernel command line option support
  Add kernel support for oprofile callgraphs on AVR32
  avr32: use the new byteorder headers

arch/avr32/boards/atngw100/setup.c

@@ -9,6 +9,7 @@
  */
 #include <linux/clk.h>
 #include <linux/etherdevice.h>
+#include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
@@ -193,7 +194,7 @@ static int __init atngw100_init(void)
 	 * PB28/EXTINT3 doesn't; it should be SMBALERT# (for PMBus),
 	 * but it's not available off-board.
 	 */
-	at32_select_periph(GPIO_PIN_PB(28), 0, AT32_GPIOF_PULLUP);
+	at32_select_periph(GPIO_PIOB_BASE, 1 << 28, 0, AT32_GPIOF_PULLUP);
 	at32_select_gpio(i2c_gpio_data.sda_pin,
 		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
 	at32_select_gpio(i2c_gpio_data.scl_pin,
@@ -207,6 +208,15 @@ postcore_initcall(atngw100_init);
 
 static int __init atngw100_arch_init(void)
 {
+	/* PB30 is the otherwise unused jumper on the mainboard, with an
+	 * external pullup; the jumper grounds it.  Use it however you
+	 * like, including letting U-Boot or Linux tweak boot sequences.
+	 */
+	at32_select_gpio(GPIO_PIN_PB(30), 0);
+	gpio_request(GPIO_PIN_PB(30), "j15");
+	gpio_direction_input(GPIO_PIN_PB(30));
+	gpio_export(GPIO_PIN_PB(30), false);
+
 	/* set_irq_type() after the arch_initcall for EIC has run, and
 	 * before the I2C subsystem could try using this IRQ.
 	 */

arch/avr32/boards/atstk1000/atstk1002.c

@@ -232,7 +232,7 @@ static void __init atstk1002_setup_extdac(void)
 		goto err_set_clk;
 	}
 
-	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+	at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
 	at73c213_data.dac_clk = gclk;
 
 err_set_clk:
@@ -330,13 +330,14 @@ static int __init atstk1002_init(void)
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
 #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_add_device_mci(0, &mci0_pdata);
+	at32_add_device_mci(0, &mci0_data);
 #endif
 #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
 #else
 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-			     fbmem_start, fbmem_size, 0);
+			     fbmem_start, fbmem_size,
+			     ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL);
 #endif
 	at32_add_device_usba(0, NULL);
 #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM

arch/avr32/boards/atstk1000/atstk1003.c

@@ -19,6 +19,7 @@
 #include <linux/spi/spi.h>
 
 #include <asm/setup.h>
+#include <asm/atmel-mci.h>
 
 #include <mach/at32ap700x.h>
 #include <mach/board.h>
@@ -94,7 +95,7 @@ static void __init atstk1003_setup_extdac(void)
 		goto err_set_clk;
 	}
 
-	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+	at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
 	at73c213_data.dac_clk = gclk;
 
 err_set_clk:

arch/avr32/boards/atstk1000/atstk1004.c

@@ -21,6 +21,7 @@
 #include <video/atmel_lcdc.h>
 
 #include <asm/setup.h>
+#include <asm/atmel-mci.h>
 
 #include <mach/at32ap700x.h>
 #include <mach/board.h>
@@ -99,7 +100,7 @@ static void __init atstk1004_setup_extdac(void)
 		goto err_set_clk;
 	}
 
-	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+	at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
 	at73c213_data.dac_clk = gclk;
 
 err_set_clk:
@@ -150,7 +151,8 @@ static int __init atstk1004_init(void)
 	at32_add_device_mci(0, &mci0_data);
 #endif
 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-			     fbmem_start, fbmem_size, 0);
+			     fbmem_start, fbmem_size,
+			     ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL);
 	at32_add_device_usba(0, NULL);
 #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
 	at32_add_device_ssc(0, ATMEL_SSC_TX);

arch/avr32/include/asm/byteorder.h

@@ -7,6 +7,9 @@
 #include <asm/types.h>
 #include <linux/compiler.h>
 
+#define __BIG_ENDIAN
+#define __SWAB_64_THRU_32__
+
 #ifdef __CHECKER__
 extern unsigned long __builtin_bswap_32(unsigned long x);
 extern unsigned short __builtin_bswap_16(unsigned short x);
@@ -17,15 +20,18 @@ extern unsigned short __builtin_bswap_16(unsigned short x);
  * the result.
  */
 #if !(__GNUC__ == 4 && __GNUC_MINOR__ < 2)
-#define __arch__swab32(x) __builtin_bswap_32(x)
-#define __arch__swab16(x) __builtin_bswap_16(x)
-#endif
+static inline __attribute_const__ __u16 __arch_swab16(__u16 val)
+{
+	return __builtin_bswap_16(val);
+}
+#define __arch_swab16 __arch_swab16
 
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-# define __BYTEORDER_HAS_U64__
-# define __SWAB_64_THRU_32__
+static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
+{
+	return __builtin_bswap_32(val);
+}
+#define __arch_swab32 __arch_swab32
 #endif
 
-#include <linux/byteorder/big_endian.h>
-
+#include <linux/byteorder.h>
 #endif /* __ASM_AVR32_BYTEORDER_H */

arch/avr32/include/asm/io.h

@@ -160,6 +160,14 @@ BUILDIO_IOPORT(l, u32)
 #define readw_relaxed			readw
 #define readl_relaxed			readl
 
+#define readb_be			__raw_readb
+#define readw_be			__raw_readw
+#define readl_be			__raw_readl
+
+#define writeb_be			__raw_writeb
+#define writew_be			__raw_writew
+#define writel_be			__raw_writel
+
 #define __BUILD_MEMORY_STRING(bwl, type)				\
 static inline void writes##bwl(volatile void __iomem *addr,		\
 			       const void *data, unsigned int count)	\

arch/avr32/kernel/process.c

@@ -9,6 +9,7 @@
 #include <linux/module.h>
 #include <linux/kallsyms.h>
 #include <linux/fs.h>
+#include <linux/pm.h>
 #include <linux/ptrace.h>
 #include <linux/reboot.h>
 #include <linux/tick.h>
@@ -20,7 +21,7 @@
 
 #include <mach/pm.h>
 
-void (*pm_power_off)(void) = NULL;
+void (*pm_power_off)(void);
 EXPORT_SYMBOL(pm_power_off);
 
 /*

arch/avr32/kernel/setup.c

@@ -283,6 +283,25 @@ static int __init early_parse_fbmem(char *p)
 }
 early_param("fbmem", early_parse_fbmem);
 
+/*
+ * Pick out the memory size.  We look for mem=size@start,
+ * where start and size are "size[KkMmGg]"
+ */
+static int __init early_mem(char *p)
+{
+	resource_size_t size, start;
+
+	start = system_ram->start;
+	size  = memparse(p, &p);
+	if (*p == '@')
+		start = memparse(p + 1, &p);
+
+	system_ram->start = start;
+	system_ram->end = system_ram->start + size - 1;
+	return 0;
+}
+early_param("mem", early_mem);
+
 static int __init parse_tag_core(struct tag *tag)
 {
 	if (tag->hdr.size > 2) {

arch/avr32/mach-at32ap/clock.c

@@ -15,24 +15,40 @@
 #include <linux/err.h>
 #include <linux/device.h>
 #include <linux/string.h>
+#include <linux/list.h>
 
 #include <mach/chip.h>
 
 #include "clock.h"
 
+/* at32 clock list */
+static LIST_HEAD(at32_clock_list);
+
 static DEFINE_SPINLOCK(clk_lock);
+static DEFINE_SPINLOCK(clk_list_lock);
+
+void at32_clk_register(struct clk *clk)
+{
+	spin_lock(&clk_list_lock);
+	/* add the new item to the end of the list */
+	list_add_tail(&clk->list, &at32_clock_list);
+	spin_unlock(&clk_list_lock);
+}
 
 struct clk *clk_get(struct device *dev, const char *id)
 {
-	int i;
+	struct clk *clk;
 
-	for (i = 0; i < at32_nr_clocks; i++) {
-		struct clk *clk = at32_clock_list[i];
+	spin_lock(&clk_list_lock);
 
-		if (clk->dev == dev && strcmp(id, clk->name) == 0)
+	list_for_each_entry(clk, &at32_clock_list, list) {
+		if (clk->dev == dev && strcmp(id, clk->name) == 0) {
+			spin_unlock(&clk_list_lock);
 			return clk;
 		}
+	}
 
+	spin_unlock(&clk_list_lock);
 	return ERR_PTR(-ENOENT);
 }
 EXPORT_SYMBOL(clk_get);
@@ -203,8 +219,8 @@ dump_clock(struct clk *parent, struct clkinf *r)
 
 	/* cost of this scan is small, but not linear... */
 	r->nest = nest + NEST_DELTA;
-	for (i = 3; i < at32_nr_clocks; i++) {
-		clk = at32_clock_list[i];
+
+	list_for_each_entry(clk, &at32_clock_list, list) {
 		if (clk->parent == parent)
 			dump_clock(clk, r);
 	}
@@ -215,6 +231,7 @@ static int clk_show(struct seq_file *s, void *unused)
 {
 	struct clkinf	r;
 	int		i;
+	struct clk 	*clk;
 
 	/* show all the power manager registers */
 	seq_printf(s, "MCCTRL  = %8x\n", pm_readl(MCCTRL));
@@ -234,14 +251,25 @@ static int clk_show(struct seq_file *s, void *unused)
 
 	seq_printf(s, "\n");
 
-	/* show clock tree as derived from the three oscillators
-	 * we "know" are at the head of the list
-	 */
 	r.s = s;
 	r.nest = 0;
-	dump_clock(at32_clock_list[0], &r);
-	dump_clock(at32_clock_list[1], &r);
-	dump_clock(at32_clock_list[2], &r);
+	/* protected from changes on the list while dumping */
+	spin_lock(&clk_list_lock);
+
+	/* show clock tree as derived from the three oscillators */
+	clk = clk_get(NULL, "osc32k");
+	dump_clock(clk, &r);
+	clk_put(clk);
+
+	clk = clk_get(NULL, "osc0");
+	dump_clock(clk, &r);
+	clk_put(clk);
+
+	clk = clk_get(NULL, "osc1");
+	dump_clock(clk, &r);
+	clk_put(clk);
+
+	spin_unlock(&clk_list_lock);
 
 	return 0;
 }

arch/avr32/mach-at32ap/clock.h

@@ -12,8 +12,13 @@
  * published by the Free Software Foundation.
  */
 #include <linux/clk.h>
+#include <linux/list.h>
+
+
+void at32_clk_register(struct clk *clk);
 
 struct clk {
+	struct list_head list;		/* linking element */
 	const char	*name;		/* Clock name/function */
 	struct device	*dev;		/* Device the clock is used by */
 	struct clk	*parent;	/* Parent clock, if any */
@@ -25,6 +30,3 @@ struct clk {
 	u16		users;		/* Enabled if non-zero */
 	u16		index;		/* Sibling index */
 };
-
-extern struct clk *at32_clock_list[];
-extern unsigned int at32_nr_clocks;

arch/avr32/mach-at32ap/include/mach/at32ap700x.h

@@ -83,4 +83,132 @@
 #define HMATRIX_BASE	0xfff00800
 #define SDRAMC_BASE	0xfff03800
 
+/* LCDC on port C */
+#define ATMEL_LCDC_PC_CC	(1ULL << 19)
+#define ATMEL_LCDC_PC_HSYNC	(1ULL << 20)
+#define ATMEL_LCDC_PC_PCLK	(1ULL << 21)
+#define ATMEL_LCDC_PC_VSYNC	(1ULL << 22)
+#define ATMEL_LCDC_PC_DVAL	(1ULL << 23)
+#define ATMEL_LCDC_PC_MODE	(1ULL << 24)
+#define ATMEL_LCDC_PC_PWR	(1ULL << 25)
+#define ATMEL_LCDC_PC_DATA0	(1ULL << 26)
+#define ATMEL_LCDC_PC_DATA1	(1ULL << 27)
+#define ATMEL_LCDC_PC_DATA2	(1ULL << 28)
+#define ATMEL_LCDC_PC_DATA3	(1ULL << 29)
+#define ATMEL_LCDC_PC_DATA4	(1ULL << 30)
+#define ATMEL_LCDC_PC_DATA5	(1ULL << 31)
+
+/* LCDC on port D */
+#define ATMEL_LCDC_PD_DATA6	(1ULL << 0)
+#define ATMEL_LCDC_PD_DATA7	(1ULL << 1)
+#define ATMEL_LCDC_PD_DATA8	(1ULL << 2)
+#define ATMEL_LCDC_PD_DATA9	(1ULL << 3)
+#define ATMEL_LCDC_PD_DATA10	(1ULL << 4)
+#define ATMEL_LCDC_PD_DATA11	(1ULL << 5)
+#define ATMEL_LCDC_PD_DATA12	(1ULL << 6)
+#define ATMEL_LCDC_PD_DATA13	(1ULL << 7)
+#define ATMEL_LCDC_PD_DATA14	(1ULL << 8)
+#define ATMEL_LCDC_PD_DATA15	(1ULL << 9)
+#define ATMEL_LCDC_PD_DATA16	(1ULL << 10)
+#define ATMEL_LCDC_PD_DATA17	(1ULL << 11)
+#define ATMEL_LCDC_PD_DATA18	(1ULL << 12)
+#define ATMEL_LCDC_PD_DATA19	(1ULL << 13)
+#define ATMEL_LCDC_PD_DATA20	(1ULL << 14)
+#define ATMEL_LCDC_PD_DATA21	(1ULL << 15)
+#define ATMEL_LCDC_PD_DATA22	(1ULL << 16)
+#define ATMEL_LCDC_PD_DATA23	(1ULL << 17)
+
+/* LCDC on port E */
+#define ATMEL_LCDC_PE_CC	(1ULL << (32 + 0))
+#define ATMEL_LCDC_PE_DVAL	(1ULL << (32 + 1))
+#define ATMEL_LCDC_PE_MODE	(1ULL << (32 + 2))
+#define ATMEL_LCDC_PE_DATA0	(1ULL << (32 + 3))
+#define ATMEL_LCDC_PE_DATA1	(1ULL << (32 + 4))
+#define ATMEL_LCDC_PE_DATA2	(1ULL << (32 + 5))
+#define ATMEL_LCDC_PE_DATA3	(1ULL << (32 + 6))
+#define ATMEL_LCDC_PE_DATA4	(1ULL << (32 + 7))
+#define ATMEL_LCDC_PE_DATA8	(1ULL << (32 + 8))
+#define ATMEL_LCDC_PE_DATA9	(1ULL << (32 + 9))
+#define ATMEL_LCDC_PE_DATA10	(1ULL << (32 + 10))
+#define ATMEL_LCDC_PE_DATA11	(1ULL << (32 + 11))
+#define ATMEL_LCDC_PE_DATA12	(1ULL << (32 + 12))
+#define ATMEL_LCDC_PE_DATA16	(1ULL << (32 + 13))
+#define ATMEL_LCDC_PE_DATA17	(1ULL << (32 + 14))
+#define ATMEL_LCDC_PE_DATA18	(1ULL << (32 + 15))
+#define ATMEL_LCDC_PE_DATA19	(1ULL << (32 + 16))
+#define ATMEL_LCDC_PE_DATA20	(1ULL << (32 + 17))
+#define ATMEL_LCDC_PE_DATA21	(1ULL << (32 + 18))
+
+
+#define ATMEL_LCDC(PORT, PIN)	(ATMEL_LCDC_##PORT##_##PIN)
+
+
+#define ATMEL_LCDC_PRI_24B_DATA	(					\
+		ATMEL_LCDC(PC, DATA0)  | ATMEL_LCDC(PC, DATA1)  |	\
+		ATMEL_LCDC(PC, DATA2)  | ATMEL_LCDC(PC, DATA3)  |	\
+		ATMEL_LCDC(PC, DATA4)  | ATMEL_LCDC(PC, DATA5)  |	\
+		ATMEL_LCDC(PD, DATA6)  | ATMEL_LCDC(PD, DATA7)  |	\
+		ATMEL_LCDC(PD, DATA8)  | ATMEL_LCDC(PD, DATA9)  |	\
+		ATMEL_LCDC(PD, DATA10) | ATMEL_LCDC(PD, DATA11) |	\
+		ATMEL_LCDC(PD, DATA12) | ATMEL_LCDC(PD, DATA13) |	\
+		ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) |	\
+		ATMEL_LCDC(PD, DATA16) | ATMEL_LCDC(PD, DATA17) |	\
+		ATMEL_LCDC(PD, DATA18) | ATMEL_LCDC(PD, DATA19) |	\
+		ATMEL_LCDC(PD, DATA20) | ATMEL_LCDC(PD, DATA21) |	\
+		ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23))
+
+#define ATMEL_LCDC_ALT_24B_DATA (					\
+		ATMEL_LCDC(PE, DATA0)  | ATMEL_LCDC(PE, DATA1)  |	\
+		ATMEL_LCDC(PE, DATA2)  | ATMEL_LCDC(PE, DATA3)  |	\
+		ATMEL_LCDC(PE, DATA4)  | ATMEL_LCDC(PC, DATA5)  |	\
+		ATMEL_LCDC(PD, DATA6)  | ATMEL_LCDC(PD, DATA7)  |	\
+		ATMEL_LCDC(PE, DATA8)  | ATMEL_LCDC(PE, DATA9)  |	\
+		ATMEL_LCDC(PE, DATA10) | ATMEL_LCDC(PE, DATA11) |	\
+		ATMEL_LCDC(PE, DATA12) | ATMEL_LCDC(PD, DATA13) |	\
+		ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) |	\
+		ATMEL_LCDC(PE, DATA16) | ATMEL_LCDC(PE, DATA17) |	\
+		ATMEL_LCDC(PE, DATA18) | ATMEL_LCDC(PE, DATA19) |	\
+		ATMEL_LCDC(PE, DATA20) | ATMEL_LCDC(PE, DATA21) |	\
+		ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23))
+
+#define ATMEL_LCDC_PRI_15B_DATA (					\
+		ATMEL_LCDC(PC, DATA0)  | ATMEL_LCDC(PC, DATA1)  |	\
+		ATMEL_LCDC(PC, DATA2)  | ATMEL_LCDC(PC, DATA3)  |	\
+		ATMEL_LCDC(PC, DATA4)  | ATMEL_LCDC(PC, DATA5)  |	\
+		ATMEL_LCDC(PD, DATA8)  | ATMEL_LCDC(PD, DATA9)  |	\
+		ATMEL_LCDC(PD, DATA10) | ATMEL_LCDC(PD, DATA11) |	\
+		ATMEL_LCDC(PD, DATA12) | ATMEL_LCDC(PD, DATA16) |	\
+		ATMEL_LCDC(PD, DATA17) | ATMEL_LCDC(PD, DATA18) |	\
+		ATMEL_LCDC(PD, DATA19) | ATMEL_LCDC(PD, DATA20))
+
+#define ATMEL_LCDC_ALT_15B_DATA	(					\
+		ATMEL_LCDC(PE, DATA0)  | ATMEL_LCDC(PE, DATA1)  |	\
+		ATMEL_LCDC(PE, DATA2)  | ATMEL_LCDC(PE, DATA3)  |	\
+		ATMEL_LCDC(PE, DATA4)  | ATMEL_LCDC(PC, DATA5)  |	\
+		ATMEL_LCDC(PE, DATA8)  | ATMEL_LCDC(PE, DATA9)  |	\
+		ATMEL_LCDC(PE, DATA10) | ATMEL_LCDC(PE, DATA11) |	\
+		ATMEL_LCDC(PE, DATA12) | ATMEL_LCDC(PE, DATA16) |	\
+		ATMEL_LCDC(PE, DATA17) | ATMEL_LCDC(PE, DATA18) |	\
+		ATMEL_LCDC(PE, DATA19) | ATMEL_LCDC(PE, DATA20))
+
+#define ATMEL_LCDC_PRI_CONTROL (					\
+		ATMEL_LCDC(PC, CC)   | ATMEL_LCDC(PC, DVAL) |		\
+		ATMEL_LCDC(PC, MODE) | ATMEL_LCDC(PC, PWR))
+
+#define ATMEL_LCDC_ALT_CONTROL (					\
+		ATMEL_LCDC(PE, CC)   | ATMEL_LCDC(PE, DVAL) |		\
+		ATMEL_LCDC(PE, MODE) | ATMEL_LCDC(PC, PWR))
+
+#define ATMEL_LCDC_CONTROL (						\
+		ATMEL_LCDC(PC, HSYNC) | ATMEL_LCDC(PC, VSYNC) |		\
+		ATMEL_LCDC(PC, PCLK))
+
+#define ATMEL_LCDC_PRI_24BIT	(ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_24B_DATA)
+
+#define ATMEL_LCDC_ALT_24BIT	(ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_24B_DATA)
+
+#define ATMEL_LCDC_PRI_15BIT	(ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_15B_DATA)
+
+#define ATMEL_LCDC_ALT_15BIT	(ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_15B_DATA)
+
 #endif /* __ASM_ARCH_AT32AP700X_H__ */

arch/avr32/mach-at32ap/include/mach/board.h

@@ -43,7 +43,7 @@ struct atmel_lcdfb_info;
 struct platform_device *
 at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
 		     unsigned long fbmem_start, unsigned long fbmem_len,
-		     unsigned int pin_config);
+		     u64 pin_mask);
 
 struct usba_platform_data;
 struct platform_device *

arch/avr32/mach-at32ap/include/mach/io.h

 #ifndef __ASM_AVR32_ARCH_AT32AP_IO_H
 #define __ASM_AVR32_ARCH_AT32AP_IO_H
 
-/* For "bizarre" halfword swapping */
-#include <linux/byteorder/swabb.h>
+#include <linux/swab.h>
 
 #if defined(CONFIG_AP700X_32_BIT_SMC)
 # define __swizzle_addr_b(addr)	(addr ^ 3UL)

arch/avr32/mach-at32ap/include/mach/portmux.h

@@ -21,9 +21,10 @@
 #define AT32_GPIOF_DEGLITCH	0x00000008	/* (IN) Filter glitches */
 #define AT32_GPIOF_MULTIDRV	0x00000010	/* Enable multidriver option */
 
-void at32_select_periph(unsigned int pin, unsigned int periph,
-			unsigned long flags);
+void at32_select_periph(unsigned int port, unsigned int pin,
+			unsigned int periph, unsigned long flags);
 void at32_select_gpio(unsigned int pin, unsigned long flags);
+void at32_deselect_pin(unsigned int pin);
 void at32_reserve_pin(unsigned int pin);
 
 #endif /* __ASM_ARCH_PORTMUX_H__ */

arch/avr32/mach-at32ap/pdc.c

@@ -35,7 +35,6 @@ static int __init pdc_probe(struct platform_device *pdev)
 }
 
 static struct platform_driver pdc_driver = {
-	.probe		= pdc_probe,
 	.driver		= {
 		.name	= "pdc",
 	},
@@ -43,6 +42,6 @@ static struct platform_driver pdc_driver = {
 
 static int __init pdc_init(void)
 {
-	return platform_driver_register(&pdc_driver);
+	return platform_driver_probe(&pdc_driver, pdc_probe);
 }
 arch_initcall(pdc_init);

arch/avr32/mach-at32ap/pio.c

@@ -50,35 +50,48 @@ static struct pio_device *gpio_to_pio(unsigned int gpio)
 }
 
 /* Pin multiplexing API */
+static DEFINE_SPINLOCK(pio_lock);
 
-void __init at32_select_periph(unsigned int pin, unsigned int periph,
-			       unsigned long flags)
+void __init at32_select_periph(unsigned int port, u32 pin_mask,
+			       unsigned int periph, unsigned long flags)
 {
 	struct pio_device *pio;
-	unsigned int pin_index = pin & 0x1f;
-	u32 mask = 1 << pin_index;
 
-	pio = gpio_to_pio(pin);
+	/* assign and verify pio */
+	pio = gpio_to_pio(port);
 	if (unlikely(!pio)) {
-		printk("pio: invalid pin %u\n", pin);
+		printk(KERN_WARNING "pio: invalid port %u\n", port);
 		goto fail;
 	}
 
-	if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask)
-			 || gpiochip_is_requested(&pio->chip, pin_index))) {
-		printk("%s: pin %u is busy\n", pio->name, pin_index);
+	/* Test if any of the requested pins is already muxed */
+	spin_lock(&pio_lock);
+	if (unlikely(pio->pinmux_mask & pin_mask)) {
+		printk(KERN_WARNING "%s: pin(s) busy (requested 0x%x, busy 0x%x)\n",
+		       pio->name, pin_mask, pio->pinmux_mask & pin_mask);
+		spin_unlock(&pio_lock);
 		goto fail;
 	}
 
-	pio_writel(pio, PUER, mask);
+	pio->pinmux_mask |= pin_mask;
+
+	/* enable pull ups */
+	pio_writel(pio, PUER, pin_mask);
+
+	/* select either peripheral A or B */
 	if (periph)
-		pio_writel(pio, BSR, mask);
+		pio_writel(pio, BSR, pin_mask);
 	else
-		pio_writel(pio, ASR, mask);
+		pio_writel(pio, ASR, pin_mask);
+
+	/* enable peripheral control */
+	pio_writel(pio, PDR, pin_mask);
 
-	pio_writel(pio, PDR, mask);
+	/* Disable pull ups if not requested. */
 	if (!(flags & AT32_GPIOF_PULLUP))
-		pio_writel(pio, PUDR, mask);
+		pio_writel(pio, PUDR, pin_mask);
+
+	spin_unlock(&pio_lock);
 
 	return;
 
@@ -134,6 +147,25 @@ fail:
 	dump_stack();
 }
 
+/*
+ * Undo a previous pin reservation. Will not affect the hardware
+ * configuration.
+ */
+void at32_deselect_pin(unsigned int pin)
+{
+	struct pio_device *pio;
+	unsigned int pin_index = pin & 0x1f;
+
+	pio = gpio_to_pio(pin);
+	if (unlikely(!pio)) {
+		printk("pio: invalid pin %u\n", pin);
+		dump_stack();
+		return;
+	}
+
+	clear_bit(pin_index, &pio->pinmux_mask);
+}
+
 /* Reserve a pin, preventing anyone else from changing its configuration. */
 void __init at32_reserve_pin(unsigned int pin)
 {
@@ -382,7 +414,6 @@ static int __init pio_probe(struct platform_device *pdev)
 }
 
 static struct platform_driver pio_driver = {
-	.probe		= pio_probe,
 	.driver		= {
 		.name		= "pio",
 	},
@@ -390,7 +421,7 @@ static struct platform_driver pio_driver = {
 
 static int __init pio_init(void)
 {
-	return platform_driver_register(&pio_driver);
+	return platform_driver_probe(&pio_driver, pio_probe);
 }
 postcore_initcall(pio_init);
 

arch/avr32/oprofile/Makefile

@@ -5,4 +5,4 @@ oprofile-y		:= $(addprefix ../../../drivers/oprofile/,	\
 				event_buffer.o oprofile_files.o		\
 				oprofilefs.o oprofile_stats.o		\
 				timer_int.o)
-oprofile-y		+= op_model_avr32.o
+oprofile-y		+= op_model_avr32.o backtrace.o

arch/avr32/oprofile/backtrace.c

+/*
+ * AVR32 specific backtracing code for oprofile
+ *
+ * Copyright 2008 Weinmann GmbH
+ *
+ * Author: Nikolaus Voss <n.voss@weinmann.de>
+ *
+ * Based on i386 oprofile backtrace code by John Levon and David Smith
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/oprofile.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+
+/* The first two words of each frame on the stack look like this if we have
+ * frame pointers */
+struct frame_head {
+	unsigned long lr;
+	struct frame_head *fp;
+};
+
+/* copied from arch/avr32/kernel/process.c */
+static inline int valid_stack_ptr(struct thread_info *tinfo, unsigned long p)
+{
+	return (p > (unsigned long)tinfo)
+		&& (p < (unsigned long)tinfo + THREAD_SIZE - 3);
+}
+
+/* copied from arch/x86/oprofile/backtrace.c */
+static struct frame_head *dump_user_backtrace(struct frame_head *head)
+{
+	struct frame_head bufhead[2];
+
+	/* Also check accessibility of one struct frame_head beyond */
+	if (!access_ok(VERIFY_READ, head, sizeof(bufhead)))
+		return NULL;
+	if (__copy_from_user_inatomic(bufhead, head, sizeof(bufhead)))
+		return NULL;
+
+	oprofile_add_trace(bufhead[0].lr);
+
+	/* frame pointers should strictly progress back up the stack
+	 * (towards higher addresses) */
+	if (bufhead[0].fp <= head)
+		return NULL;
+
+	return bufhead[0].fp;
+}
+
+void avr32_backtrace(struct pt_regs * const regs, unsigned int depth)
+{
+	/* Get first frame pointer */
+	struct frame_head *head = (struct frame_head *)(regs->r7);
+
+	if (!user_mode(regs)) {
+#ifdef CONFIG_FRAME_POINTER
+		/*
+		 * Traverse the kernel stack from frame to frame up to
+		 * "depth" steps.
+		 */
+		while (depth-- && valid_stack_ptr(task_thread_info(current),
+						  (unsigned long)head)) {
+			oprofile_add_trace(head->lr);
+			if (head->fp <= head)
+				break;
+			head = head->fp;
+		}
+#endif
+	} else {
+		/* Assume we have frame pointers in user mode process */
+		while (depth-- && head)
+			head = dump_user_backtrace(head);
+	}
+}
+
+

arch/avr32/oprofile/op_model_avr32.c

@@ -22,6 +22,8 @@
 #define AVR32_PERFCTR_IRQ_GROUP	0
 #define AVR32_PERFCTR_IRQ_LINE	1
 
+void avr32_backtrace(struct pt_regs * const regs, unsigned int depth);
+
 enum { PCCNT, PCNT0, PCNT1, NR_counter };
 
 struct avr32_perf_counter {
@@ -223,6 +225,8 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	memcpy(ops, &avr32_perf_counter_ops,
 			sizeof(struct oprofile_operations));
 
+	ops->backtrace = avr32_backtrace;
+
 	printk(KERN_INFO "oprofile: using AVR32 performance monitoring.\n");
 
 	return 0;