Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  sis190: failure to set the MAC address from EEPROM
  Fix phy_read/write redefinition errors in ucc_geth_phy.c
  Update ucc_geth.c for new workqueue structure
  myri10ge: update driver version to 1.2.0
  myri10ge: check that we can get an irq
  myri10ge: make wc_fifo usage load-time tunable
  8139cp: Don't blindly enable interrupts
  [PATCH] bcm43xx: Fix failure to deliver PCI-E interrupts

drivers/net/8139cp.c

@@ -765,17 +765,18 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev)
 	struct cp_private *cp = netdev_priv(dev);
 	unsigned entry;
 	u32 eor, flags;
+	unsigned long intr_flags;
 #if CP_VLAN_TAG_USED
 	u32 vlan_tag = 0;
 #endif
 	int mss = 0;
 
-	spin_lock_irq(&cp->lock);
+	spin_lock_irqsave(&cp->lock, intr_flags);
 
 	/* This is a hard error, log it. */
 	if (TX_BUFFS_AVAIL(cp) <= (skb_shinfo(skb)->nr_frags + 1)) {
 		netif_stop_queue(dev);
-		spin_unlock_irq(&cp->lock);
+		spin_unlock_irqrestore(&cp->lock, intr_flags);
 		printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
 		       dev->name);
 		return 1;
@@ -908,7 +909,7 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev)
 	if (TX_BUFFS_AVAIL(cp) <= (MAX_SKB_FRAGS + 1))
 		netif_stop_queue(dev);
 
-	spin_unlock_irq(&cp->lock);
+	spin_unlock_irqrestore(&cp->lock, intr_flags);
 
 	cpw8(TxPoll, NormalTxPoll);
 	dev->trans_start = jiffies;

drivers/net/myri10ge/myri10ge.c

@@ -71,7 +71,7 @@
 #include "myri10ge_mcp.h"
 #include "myri10ge_mcp_gen_header.h"
 
-#define MYRI10GE_VERSION_STR "1.1.0"
+#define MYRI10GE_VERSION_STR "1.2.0"
 
 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
 MODULE_AUTHOR("Maintainer: help@myri.com");
@@ -274,6 +274,10 @@ static int myri10ge_fill_thresh = 256;
 module_param(myri10ge_fill_thresh, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed\n");
 
+static int myri10ge_wcfifo = 1;
+module_param(myri10ge_wcfifo, int, S_IRUGO);
+MODULE_PARM_DESC(myri10ge_wcfifo, "Enable WC Fifo when WC is enabled\n");
+
 #define MYRI10GE_FW_OFFSET 1024*1024
 #define MYRI10GE_HIGHPART_TO_U32(X) \
 (sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
@@ -1714,7 +1718,7 @@ static int myri10ge_open(struct net_device *dev)
 		goto abort_with_irq;
 	}
 
-	if (mgp->mtrr >= 0) {
+	if (myri10ge_wcfifo && mgp->mtrr >= 0) {
 		mgp->tx.wc_fifo = (u8 __iomem *) mgp->sram + MXGEFW_ETH_SEND_4;
 		mgp->rx_small.wc_fifo =
 		    (u8 __iomem *) mgp->sram + MXGEFW_ETH_RECV_SMALL;
@@ -2878,7 +2882,6 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	netdev->hard_start_xmit = myri10ge_xmit;
 	netdev->get_stats = myri10ge_get_stats;
 	netdev->base_addr = mgp->iomem_base;
-	netdev->irq = pdev->irq;
 	netdev->change_mtu = myri10ge_change_mtu;
 	netdev->set_multicast_list = myri10ge_set_multicast_list;
 	netdev->set_mac_address = myri10ge_set_mac_address;
@@ -2888,6 +2891,15 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	netdev->poll = myri10ge_poll;
 	netdev->weight = myri10ge_napi_weight;
 
+	/* make sure we can get an irq, and that MSI can be
+	 * setup (if available).  Also ensure netdev->irq
+	 * is set to correct value if MSI is enabled */
+	status = myri10ge_request_irq(mgp);
+	if (status != 0)
+		goto abort_with_firmware;
+	netdev->irq = pdev->irq;
+	myri10ge_free_irq(mgp);
+
 	/* Save configuration space to be restored if the
 	 * nic resets due to a parity error */
 	pci_save_state(pdev);
@@ -2903,8 +2915,9 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		dev_err(&pdev->dev, "register_netdev failed: %d\n", status);
 		goto abort_with_state;
 	}
-	dev_info(dev, "%d, tx bndry %d, fw %s, WC %s\n",
-		 pdev->irq, mgp->tx.boundary, mgp->fw_name,
+	dev_info(dev, "%s IRQ %d, tx bndry %d, fw %s, WC %s\n",
+		 (mgp->msi_enabled ? "MSI" : "xPIC"),
+		 netdev->irq, mgp->tx.boundary, mgp->fw_name,
 		 (mgp->mtrr >= 0 ? "Enabled" : "Disabled"));
 
 	return 0;

drivers/net/sis190.c

@@ -1562,7 +1562,7 @@ static int __devinit sis190_get_mac_addr_from_eeprom(struct pci_dev *pdev,
 	for (i = 0; i < MAC_ADDR_LEN / 2; i++) {
 		__le16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i);
 
-		((u16 *)dev->dev_addr)[0] = le16_to_cpu(w);
+		((u16 *)dev->dev_addr)[i] = le16_to_cpu(w);
 	}
 
 	sis190_set_rgmii(tp, sis190_read_eeprom(ioaddr, EEPROMInfo));

drivers/net/ucc_geth.c

@@ -29,6 +29,7 @@
 #include <linux/fsl_devices.h>
 #include <linux/ethtool.h>
 #include <linux/mii.h>
+#include <linux/workqueue.h>
 
 #include <asm/of_platform.h>
 #include <asm/uaccess.h>
@@ -472,7 +473,7 @@ static void put_enet_addr_container(struct enet_addr_container *enet_addr_cont)
 	kfree(enet_addr_cont);
 }
 
-static int set_mac_addr(__be16 __iomem *reg, u8 *mac)
+static void set_mac_addr(__be16 __iomem *reg, u8 *mac)
 {
 	out_be16(&reg[0], ((u16)mac[5] << 8) | mac[4]);
 	out_be16(&reg[1], ((u16)mac[3] << 8) | mac[2]);
@@ -3920,10 +3921,11 @@ static irqreturn_t phy_interrupt(int irq, void *dev_id)
 }
 
 /* Scheduled by the phy_interrupt/timer to handle PHY changes */
-static void ugeth_phy_change(void *data)
+static void ugeth_phy_change(struct work_struct *work)
 {
-	struct net_device *dev = (struct net_device *)data;
-	struct ucc_geth_private *ugeth = netdev_priv(dev);
+	struct ucc_geth_private *ugeth =
+		container_of(work, struct ucc_geth_private, tq);
+	struct net_device *dev = ugeth->dev;
 	struct ucc_geth *ug_regs;
 	int result = 0;
 
@@ -4080,7 +4082,7 @@ static int ucc_geth_open(struct net_device *dev)
 #endif				/* CONFIG_UGETH_NAPI */
 
 	/* Set up the PHY change work queue */
-	INIT_WORK(&ugeth->tq, ugeth_phy_change, dev);
+	INIT_WORK(&ugeth->tq, ugeth_phy_change);
 
 	init_timer(&ugeth->phy_info_timer);
 	ugeth->phy_info_timer.function = &ugeth_phy_startup_timer;

drivers/net/wireless/bcm43xx/bcm43xx_main.c

@@ -2701,8 +2701,8 @@ static int bcm43xx_probe_cores(struct bcm43xx_private *bcm)
 		sb_id_hi = bcm43xx_read32(bcm, BCM43xx_CIR_SB_ID_HI);
 
 		/* extract core_id, core_rev, core_vendor */
-		core_id = (sb_id_hi & 0xFFF0) >> 4;
-		core_rev = (sb_id_hi & 0xF);
+		core_id = (sb_id_hi & 0x8FF0) >> 4;
+		core_rev = ((sb_id_hi & 0xF) | ((sb_id_hi & 0x7000) >> 8));
 		core_vendor = (sb_id_hi & 0xFFFF0000) >> 16;
 
 		dprintk(KERN_INFO PFX "Core %d: ID 0x%x, rev 0x%x, vendor 0x%x\n",
@@ -2873,7 +2873,10 @@ static int bcm43xx_wireless_core_init(struct bcm43xx_private *bcm,
 		sbimconfiglow = bcm43xx_read32(bcm, BCM43xx_CIR_SBIMCONFIGLOW);
 		sbimconfiglow &= ~ BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK;
 		sbimconfiglow &= ~ BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK;
+		if (bcm->bustype == BCM43xx_BUSTYPE_PCI)
 			sbimconfiglow |= 0x32;
+		else
+			sbimconfiglow |= 0x53;
 		bcm43xx_write32(bcm, BCM43xx_CIR_SBIMCONFIGLOW, sbimconfiglow);
 	}
 
@@ -3077,7 +3080,7 @@ static int bcm43xx_setup_backplane_pci_connection(struct bcm43xx_private *bcm,
 	if (err)
 		goto out;
 
-	if (bcm->current_core->rev < 6 ||
+	if (bcm->current_core->rev < 6 &&
 		bcm->current_core->id == BCM43xx_COREID_PCI) {
 		value = bcm43xx_read32(bcm, BCM43xx_CIR_SBINTVEC);
 		value |= (1 << backplane_flag_nr);