V4L/DVB (8006): em28xx: Split HVR900 into two separate entries

 - Separate the newer variant of the HVR-900 into its own device profile
   because it has a Micronas DRX397 instead of the Zarlink demod.  This
   doesn't make the device work, but at least we don't try to initialize it
   as though it had the Zarlink device.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
[mchehab@infradead.org: avoid compilation breakage at mainstream, where drx397xD.h doesn't exist yet]
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Documentation/video4linux/CARDLIST.em28xx

@@ -8,7 +8,7 @@
   7 -> Leadtek Winfast USB II                   (em2800)
   8 -> Kworld USB2800                           (em2800)
   9 -> Pinnacle Dazzle DVC 90/DVC 100           (em2820/em2840) [2304:0207,2304:021a]
- 10 -> Hauppauge WinTV HVR 900                  (em2880)        [2040:6500,2040:6502]
+ 10 -> Hauppauge WinTV HVR 900                  (em2880)        [2040:6500]
  11 -> Terratec Hybrid XS                       (em2880)        [0ccd:0042]
  12 -> Kworld PVR TV 2800 RF                    (em2820/em2840)
  13 -> Terratec Prodigy XS                      (em2880)        [0ccd:0047]
@@ -16,3 +16,4 @@
  15 -> V-Gear PocketTV                          (em2800)
  16 -> Hauppauge WinTV HVR 950                  (em2880)        [2040:6513,2040:6517,2040:651b,2040:651f]
  17 -> Pinnacle PCTV HD Pro Stick               (em2880)        [2304:0227]
+ 18 -> Hauppauge WinTV HVR 900 (R2)             (em2880)        [2040:6502]

drivers/media/video/em28xx/em28xx-cards.c

@@ -173,6 +173,27 @@ struct em28xx_board em28xx_boards[] = {
 			.amux     = 1,
 		} },
 	},
+	[EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
+		.name         = "Hauppauge WinTV HVR 900 (R2)",
+		.vchannels    = 3,
+		.tda9887_conf = TDA9887_PRESENT,
+		.tuner_type   = TUNER_XC2028,
+		.mts_firmware = 1,
+		.decoder      = EM28XX_TVP5150,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = 0,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = TVP5150_COMPOSITE1,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = TVP5150_SVIDEO,
+			.amux     = 1,
+		} },
+	},
 	[EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
 		.name           = "Hauppauge WinTV HVR 950",
 		.vchannels      = 3,
@@ -445,7 +466,7 @@ struct usb_device_id em28xx_id_table [] = {
 	{ USB_DEVICE(0x2040, 0x6500),
 			.driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
 	{ USB_DEVICE(0x2040, 0x6502),
-			.driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
+			.driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
 	{ USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
 			.driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 },
 	{ USB_DEVICE(0x2040, 0x6517), /* HP  HVR-950 */
@@ -567,6 +588,7 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 	switch (dev->model) {
 	case EM2880_BOARD_TERRATEC_PRODIGY_XS:
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
 	case EM2880_BOARD_TERRATEC_HYBRID_XS:
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
 	case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
@@ -602,6 +624,10 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
 		ctl->demod = XC3028_FE_ZARLINK456;
 		break;
+	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
+		/* djh - Not sure which demod we need here */
+		ctl->demod = XC3028_FE_DEFAULT;
+		break;
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
 	case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
 		/* FIXME: Better to specify the needed IF */
@@ -781,6 +807,7 @@ void em28xx_card_setup(struct em28xx *dev)
 	switch (dev->model) {
 	case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
 	{
 		struct tveeprom tv;

drivers/media/video/em28xx/em28xx-dvb.c

@@ -27,6 +27,9 @@
 
 #include "lgdt330x.h"
 #include "zl10353.h"
+#ifdef EM28XX_DRX397XD_SUPPORT
+#include "drx397xD.h"
+#endif
 
 MODULE_DESCRIPTION("driver for em28xx based DVB cards");
 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
@@ -228,6 +231,13 @@ static struct zl10353_config em28xx_zl10353_with_xc3028 = {
 	.if2 = 45600,
 };
 
+#ifdef EM28XX_DRX397XD_SUPPORT
+/* [TODO] djh - not sure yet what the device config needs to contain */
+static struct drx397xD_config em28xx_drx397xD_with_xc3028 = {
+	.demod_address = (0xe0 >> 1),
+};
+#endif
+
 /* ------------------------------------------------------------------ */
 
 static int attach_xc3028(u8 addr, struct em28xx *dev)
@@ -418,6 +428,19 @@ static int dvb_init(struct em28xx *dev)
 			goto out_free;
 		}
 		break;
+	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
+#ifdef EM28XX_DRX397XD_SUPPORT
+		/* We don't have the config structure properly populated, so
+		   this is commented out for now */
+		dvb->frontend = dvb_attach(drx397xD_attach,
+					   &em28xx_drx397xD_with_xc3028,
+					   &dev->i2c_adap);
+		if (attach_xc3028(0x61, dev) < 0) {
+			result = -EINVAL;
+			goto out_free;
+		}
+		break;
+#endif
 	default:
 		printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card"
 				" isn't supported yet\n",

drivers/media/video/em28xx/em28xx.h

@@ -56,6 +56,7 @@
 #define EM2800_BOARD_VGEAR_POCKETTV             15
 #define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950	16
 #define EM2880_BOARD_PINNACLE_PCTV_HD_PRO	17
+#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2	18
 
 /* Limits minimum and default number of buffers */
 #define EM28XX_MIN_BUF 4