ath9k: Move btcoex stuff from hw.[ch] to new btcoex.[ch]

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/Makefile

@@ -12,7 +12,8 @@ ath9k-y +=	hw.o \
 		recv.o \
 		xmit.o \
 		virtual.o \
-		rc.o
+		rc.o \
+		btcoex.o
 
 ath9k-$(CONFIG_PCI) += pci.o
 ath9k-$(CONFIG_ATHEROS_AR71XX) += ahb.o

drivers/net/wireless/ath/ath9k/ath9k.h

@@ -26,6 +26,7 @@
 #include "rc.h"
 #include "debug.h"
 #include "../ath.h"
+#include "btcoex.h"
 
 struct ath_node;
 

drivers/net/wireless/ath/ath9k/btcoex.c

+/*
+ * Copyright (c) 2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ath9k.h"
+
+void ath9k_hw_btcoex_init(struct ath_hw *ah)
+{
+	/* connect bt_active to baseband */
+	REG_CLR_BIT(ah, AR_GPIO_INPUT_EN_VAL,
+			(AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_DEF |
+			 AR_GPIO_INPUT_EN_VAL_BT_FREQUENCY_DEF));
+
+	REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
+			AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB);
+
+	/* Set input mux for bt_active to gpio pin */
+	REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1,
+			AR_GPIO_INPUT_MUX1_BT_ACTIVE,
+			ah->btactive_gpio);
+
+	/* Configure the desired gpio port for input */
+	ath9k_hw_cfg_gpio_input(ah, ah->btactive_gpio);
+}
+
+void ath9k_hw_btcoex_enable(struct ath_hw *ah)
+{
+	/* Configure the desired GPIO port for TX_FRAME output */
+	ath9k_hw_cfg_output(ah, ah->wlanactive_gpio,
+			    AR_GPIO_OUTPUT_MUX_AS_TX_FRAME);
+
+	ah->ah_sc->sc_flags |= SC_OP_BTCOEX_ENABLED;
+}
+
+void ath9k_hw_btcoex_disable(struct ath_hw *ah)
+{
+	ath9k_hw_set_gpio(ah, ah->wlanactive_gpio, 0);
+
+	ath9k_hw_cfg_output(ah, ah->wlanactive_gpio,
+			AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+
+	ah->ah_sc->sc_flags &= ~SC_OP_BTCOEX_ENABLED;
+}

drivers/net/wireless/ath/ath9k/btcoex.h

+/*
+ * Copyright (c) 2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef BTCOEX_H
+#define BTCOEX_H
+
+void ath9k_hw_btcoex_init(struct ath_hw *ah);
+void ath9k_hw_btcoex_enable(struct ath_hw *ah);
+void ath9k_hw_btcoex_disable(struct ath_hw *ah);
+
+#endif

drivers/net/wireless/ath/ath9k/hw.c

@@ -4068,45 +4068,3 @@ void ath9k_hw_set11nmac2040(struct ath_hw *ah, enum ath9k_ht_macmode mode)
 
 	REG_WRITE(ah, AR_2040_MODE, macmode);
 }
-
-/***************************/
-/*  Bluetooth Coexistence  */
-/***************************/
-
-void ath9k_hw_btcoex_init(struct ath_hw *ah)
-{
-	/* connect bt_active to baseband */
-	REG_CLR_BIT(ah, AR_GPIO_INPUT_EN_VAL,
-			(AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_DEF |
-			 AR_GPIO_INPUT_EN_VAL_BT_FREQUENCY_DEF));
-
-	REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
-			AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB);
-
-	/* Set input mux for bt_active to gpio pin */
-	REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1,
-			AR_GPIO_INPUT_MUX1_BT_ACTIVE,
-			ah->btactive_gpio);
-
-	/* Configure the desired gpio port for input */
-	ath9k_hw_cfg_gpio_input(ah, ah->btactive_gpio);
-}
-
-void ath9k_hw_btcoex_enable(struct ath_hw *ah)
-{
-	/* Configure the desired GPIO port for TX_FRAME output */
-	ath9k_hw_cfg_output(ah, ah->wlanactive_gpio,
-			    AR_GPIO_OUTPUT_MUX_AS_TX_FRAME);
-
-	ah->ah_sc->sc_flags |= SC_OP_BTCOEX_ENABLED;
-}
-
-void ath9k_hw_btcoex_disable(struct ath_hw *ah)
-{
-	ath9k_hw_set_gpio(ah, ah->wlanactive_gpio, 0);
-
-	ath9k_hw_cfg_output(ah, ah->wlanactive_gpio,
-			AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
-
-	ah->ah_sc->sc_flags &= ~SC_OP_BTCOEX_ENABLED;
-}

drivers/net/wireless/ath/ath9k/hw.h

@@ -614,8 +614,4 @@ bool ath9k_hw_intrpend(struct ath_hw *ah);
 bool ath9k_hw_getisr(struct ath_hw *ah, enum ath9k_int *masked);
 enum ath9k_int ath9k_hw_set_interrupts(struct ath_hw *ah, enum ath9k_int ints);
 
-void ath9k_hw_btcoex_init(struct ath_hw *ah);
-void ath9k_hw_btcoex_enable(struct ath_hw *ah);
-void ath9k_hw_btcoex_disable(struct ath_hw *ah);
-
 #endif