Commit 0e501834 authored by Henrique de Moraes Holschuh's avatar Henrique de Moraes Holschuh Committed by Len Brown

thinkpad-acpi: rework brightness support

Refactor and redesign the brightness control backend...

In order to fix bugzilla #11750...

Add a new brightness control mode: support direct NVRAM checkpointing
of the backlight level (i.e. store directly to NVRAM without the need
for UCMS calls), and use that together with the EC-based control.
Disallow UCMS+EC, thus avoiding races with the SMM firmware.

Switch the models that define HBRV (EC Brightness Value) in the DSDT
to the new mode.  These are: T40-T43, R50-R52, R50e, R51e, X31-X41.

Change the default for all other IBM ThinkPads to UCMS-only.  The
Lenovo models already default to UCMS-only.
Reported-by: default avatarAlexey Fisher <bug-track@fisher-privat.net>
Signed-off-by: default avatarHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: default avatarLen Brown <len.brown@intel.com>
parent 74a60c0f
......@@ -1157,10 +1157,15 @@ display backlight brightness control methods have 16 levels, ranging
from 0 to 15.
There are two interfaces to the firmware for direct brightness control,
EC and CMOS. To select which one should be used, use the
EC and UCMS (or CMOS). To select which one should be used, use the
brightness_mode module parameter: brightness_mode=1 selects EC mode,
brightness_mode=2 selects CMOS mode, brightness_mode=3 selects both EC
and CMOS. The driver tries to auto-detect which interface to use.
brightness_mode=2 selects UCMS mode, brightness_mode=3 selects EC
mode with NVRAM backing (so that brightness changes are remembered
across shutdown/reboot).
The driver tries to select which interface to use from a table of
defaults for each ThinkPad model. If it makes a wrong choice, please
report this as a bug, so that we can fix it.
When display backlight brightness controls are available through the
standard ACPI interface, it is best to use it instead of this direct
......@@ -1498,6 +1503,7 @@ to enable more than one output class, just add their values.
(bluetooth, WWAN, UWB...)
0x0008 HKEY event interface, hotkeys
0x0010 Fan control
0x0020 Backlight brightness
There is also a kernel build option to enable more debugging
information, which may be necessary to debug driver problems.
......
......@@ -192,6 +192,7 @@ enum {
#define TPACPI_DBG_RFKILL 0x0004
#define TPACPI_DBG_HKEY 0x0008
#define TPACPI_DBG_FAN 0x0010
#define TPACPI_DBG_BRGHT 0x0020
#define onoff(status, bit) ((status) & (1 << (bit)) ? "on" : "off")
#define enabled(status, bit) ((status) & (1 << (bit)) ? "enabled" : "disabled")
......@@ -274,7 +275,6 @@ static struct {
static struct {
u16 hotkey_mask_ff:1;
u16 bright_cmos_ec_unsync:1;
} tp_warned;
struct thinkpad_id_data {
......@@ -5526,6 +5526,20 @@ static struct ibm_struct ecdump_driver_data = {
#define TPACPI_BACKLIGHT_DEV_NAME "thinkpad_screen"
/*
* ThinkPads can read brightness from two places: EC HBRV (0x31), or
* CMOS NVRAM byte 0x5E, bits 0-3.
*
* EC HBRV (0x31) has the following layout
* Bit 7: unknown function
* Bit 6: unknown function
* Bit 5: Z: honour scale changes, NZ: ignore scale changes
* Bit 4: must be set to zero to avoid problems
* Bit 3-0: backlight brightness level
*
* brightness_get_raw returns status data in the HBRV layout
*/
enum {
TP_EC_BACKLIGHT = 0x31,
......@@ -5535,108 +5549,164 @@ enum {
TP_EC_BACKLIGHT_MAPSW = 0x20,
};
enum tpacpi_brightness_access_mode {
TPACPI_BRGHT_MODE_AUTO = 0, /* Not implemented yet */
TPACPI_BRGHT_MODE_EC, /* EC control */
TPACPI_BRGHT_MODE_UCMS_STEP, /* UCMS step-based control */
TPACPI_BRGHT_MODE_ECNVRAM, /* EC control w/ NVRAM store */
TPACPI_BRGHT_MODE_MAX
};
static struct backlight_device *ibm_backlight_device;
static int brightness_mode;
static enum tpacpi_brightness_access_mode brightness_mode =
TPACPI_BRGHT_MODE_MAX;
static unsigned int brightness_enable = 2; /* 2 = auto, 0 = no, 1 = yes */
static struct mutex brightness_mutex;
/*
* ThinkPads can read brightness from two places: EC 0x31, or
* CMOS NVRAM byte 0x5E, bits 0-3.
*
* EC 0x31 has the following layout
* Bit 7: unknown function
* Bit 6: unknown function
* Bit 5: Z: honour scale changes, NZ: ignore scale changes
* Bit 4: must be set to zero to avoid problems
* Bit 3-0: backlight brightness level
*
* brightness_get_raw returns status data in the EC 0x31 layout
*/
static int brightness_get_raw(int *status)
/* NVRAM brightness access,
* call with brightness_mutex held! */
static unsigned int tpacpi_brightness_nvram_get(void)
{
u8 lec = 0, lcmos = 0, level = 0;
u8 lnvram;
if (brightness_mode & 1) {
if (!acpi_ec_read(TP_EC_BACKLIGHT, &lec))
return -EIO;
level = lec & TP_EC_BACKLIGHT_LVLMSK;
};
if (brightness_mode & 2) {
lcmos = (nvram_read_byte(TP_NVRAM_ADDR_BRIGHTNESS)
lnvram = (nvram_read_byte(TP_NVRAM_ADDR_BRIGHTNESS)
& TP_NVRAM_MASK_LEVEL_BRIGHTNESS)
>> TP_NVRAM_POS_LEVEL_BRIGHTNESS;
lcmos &= (tp_features.bright_16levels)? 0x0f : 0x07;
level = lcmos;
}
lnvram &= (tp_features.bright_16levels) ? 0x0f : 0x07;
if (brightness_mode == 3) {
*status = lec; /* Prefer EC, CMOS is just a backing store */
return lnvram;
}
static void tpacpi_brightness_checkpoint_nvram(void)
{
u8 lec = 0;
u8 b_nvram;
if (brightness_mode != TPACPI_BRGHT_MODE_ECNVRAM)
return;
vdbg_printk(TPACPI_DBG_BRGHT,
"trying to checkpoint backlight level to NVRAM...\n");
if (mutex_lock_killable(&brightness_mutex) < 0)
return;
if (unlikely(!acpi_ec_read(TP_EC_BACKLIGHT, &lec)))
goto unlock;
lec &= TP_EC_BACKLIGHT_LVLMSK;
if (lec == lcmos)
tp_warned.bright_cmos_ec_unsync = 0;
else {
if (!tp_warned.bright_cmos_ec_unsync) {
printk(TPACPI_ERR
"CMOS NVRAM (%u) and EC (%u) do not "
"agree on display brightness level\n",
(unsigned int) lcmos,
(unsigned int) lec);
tp_warned.bright_cmos_ec_unsync = 1;
}
b_nvram = nvram_read_byte(TP_NVRAM_ADDR_BRIGHTNESS);
if (lec != ((b_nvram & TP_NVRAM_MASK_LEVEL_BRIGHTNESS)
>> TP_NVRAM_POS_LEVEL_BRIGHTNESS)) {
/* NVRAM needs update */
b_nvram &= ~(TP_NVRAM_MASK_LEVEL_BRIGHTNESS <<
TP_NVRAM_POS_LEVEL_BRIGHTNESS);
b_nvram |= lec;
nvram_write_byte(b_nvram, TP_NVRAM_ADDR_BRIGHTNESS);
dbg_printk(TPACPI_DBG_BRGHT,
"updated NVRAM backlight level to %u (0x%02x)\n",
(unsigned int) lec, (unsigned int) b_nvram);
} else
vdbg_printk(TPACPI_DBG_BRGHT,
"NVRAM backlight level already is %u (0x%02x)\n",
(unsigned int) lec, (unsigned int) b_nvram);
unlock:
mutex_unlock(&brightness_mutex);
}
/* call with brightness_mutex held! */
static int tpacpi_brightness_get_raw(int *status)
{
u8 lec = 0;
switch (brightness_mode) {
case TPACPI_BRGHT_MODE_UCMS_STEP:
*status = tpacpi_brightness_nvram_get();
return 0;
case TPACPI_BRGHT_MODE_EC:
case TPACPI_BRGHT_MODE_ECNVRAM:
if (unlikely(!acpi_ec_read(TP_EC_BACKLIGHT, &lec)))
return -EIO;
*status = lec;
return 0;
default:
return -ENXIO;
}
} else {
*status = level;
}
}
/* call with brightness_mutex held! */
/* do NOT call with illegal backlight level value */
static int tpacpi_brightness_set_ec(unsigned int value)
{
u8 lec = 0;
if (unlikely(!acpi_ec_read(TP_EC_BACKLIGHT, &lec)))
return -EIO;
if (unlikely(!acpi_ec_write(TP_EC_BACKLIGHT,
(lec & TP_EC_BACKLIGHT_CMDMSK) |
(value & TP_EC_BACKLIGHT_LVLMSK))))
return -EIO;
return 0;
}
/* call with brightness_mutex held! */
static int tpacpi_brightness_set_ucmsstep(unsigned int value)
{
int cmos_cmd, inc;
unsigned int current_value, i;
current_value = tpacpi_brightness_nvram_get();
if (value == current_value)
return 0;
cmos_cmd = (value > current_value) ?
TP_CMOS_BRIGHTNESS_UP :
TP_CMOS_BRIGHTNESS_DOWN;
inc = (value > current_value) ? 1 : -1;
for (i = current_value; i != value; i += inc)
if (issue_thinkpad_cmos_command(cmos_cmd))
return -EIO;
return 0;
}
/* May return EINTR which can always be mapped to ERESTARTSYS */
static int brightness_set(int value)
static int brightness_set(unsigned int value)
{
int cmos_cmd, inc, i, res;
int current_value;
int command_bits;
int res;
if (value > ((tp_features.bright_16levels)? 15 : 7) ||
value < 0)
return -EINVAL;
vdbg_printk(TPACPI_DBG_BRGHT,
"set backlight level to %d\n", value);
res = mutex_lock_killable(&brightness_mutex);
if (res < 0)
return res;
res = brightness_get_raw(&current_value);
if (res < 0)
goto errout;
command_bits = current_value & TP_EC_BACKLIGHT_CMDMSK;
current_value &= TP_EC_BACKLIGHT_LVLMSK;
cmos_cmd = value > current_value ?
TP_CMOS_BRIGHTNESS_UP :
TP_CMOS_BRIGHTNESS_DOWN;
inc = (value > current_value)? 1 : -1;
res = 0;
for (i = current_value; i != value; i += inc) {
if ((brightness_mode & 2) &&
issue_thinkpad_cmos_command(cmos_cmd)) {
res = -EIO;
goto errout;
}
if ((brightness_mode & 1) &&
!acpi_ec_write(TP_EC_BACKLIGHT,
(i + inc) | command_bits)) {
res = -EIO;
goto errout;;
}
switch (brightness_mode) {
case TPACPI_BRGHT_MODE_EC:
case TPACPI_BRGHT_MODE_ECNVRAM:
res = tpacpi_brightness_set_ec(value);
break;
case TPACPI_BRGHT_MODE_UCMS_STEP:
res = tpacpi_brightness_set_ucmsstep(value);
break;
default:
res = -ENXIO;
}
errout:
mutex_unlock(&brightness_mutex);
return res;
}
......@@ -5645,21 +5715,34 @@ errout:
static int brightness_update_status(struct backlight_device *bd)
{
/* it is the backlight class's job (caller) to handle
* EINTR and other errors properly */
return brightness_set(
unsigned int level =
(bd->props.fb_blank == FB_BLANK_UNBLANK &&
bd->props.power == FB_BLANK_UNBLANK) ?
bd->props.brightness : 0);
bd->props.brightness : 0;
dbg_printk(TPACPI_DBG_BRGHT,
"backlight: attempt to set level to %d\n",
level);
/* it is the backlight class's job (caller) to handle
* EINTR and other errors properly */
return brightness_set(level);
}
static int brightness_get(struct backlight_device *bd)
{
int status, res;
res = brightness_get_raw(&status);
res = mutex_lock_killable(&brightness_mutex);
if (res < 0)
return 0; /* FIXME: teach backlight about error handling */
return 0;
res = tpacpi_brightness_get_raw(&status);
mutex_unlock(&brightness_mutex);
if (res < 0)
return 0;
return status & TP_EC_BACKLIGHT_LVLMSK;
}
......@@ -5709,7 +5792,7 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
}
if (!brightness_enable) {
dbg_printk(TPACPI_DBG_INIT,
dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_BRGHT,
"brightness support disabled by "
"module parameter\n");
return 1;
......@@ -5724,20 +5807,38 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
if (b == 16)
tp_features.bright_16levels = 1;
if (!brightness_mode) {
if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO)
brightness_mode = 2;
/*
* Check for module parameter bogosity, note that we
* init brightness_mode to TPACPI_BRGHT_MODE_MAX in order to be
* able to detect "unspecified"
*/
if (brightness_mode > TPACPI_BRGHT_MODE_MAX)
return -EINVAL;
/* TPACPI_BRGHT_MODE_AUTO not implemented yet, just use default */
if (brightness_mode == TPACPI_BRGHT_MODE_AUTO ||
brightness_mode == TPACPI_BRGHT_MODE_MAX) {
if (thinkpad_id.vendor == PCI_VENDOR_ID_IBM) {
/*
* IBM models that define HBRV probably have
* EC-based backlight level control
*/
if (acpi_evalf(ec_handle, NULL, "HBRV", "qd"))
/* T40-T43, R50-R52, R50e, R51e, X31-X41 */
brightness_mode = TPACPI_BRGHT_MODE_ECNVRAM;
else
brightness_mode = 3;
/* all other IBM ThinkPads */
brightness_mode = TPACPI_BRGHT_MODE_UCMS_STEP;
} else
/* All Lenovo ThinkPads */
brightness_mode = TPACPI_BRGHT_MODE_UCMS_STEP;
dbg_printk(TPACPI_DBG_INIT, "selected brightness_mode=%d\n",
dbg_printk(TPACPI_DBG_BRGHT,
"selected brightness_mode=%d\n",
brightness_mode);
}
if (brightness_mode > 3)
return -EINVAL;
if (brightness_get_raw(&b) < 0)
if (tpacpi_brightness_get_raw(&b) < 0)
return 1;
if (tp_features.bright_16levels)
......@@ -5751,7 +5852,8 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
printk(TPACPI_ERR "Could not register backlight device\n");
return PTR_ERR(ibm_backlight_device);
}
vdbg_printk(TPACPI_DBG_INIT, "brightness is supported\n");
vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_BRGHT,
"brightness is supported\n");
ibm_backlight_device->props.max_brightness =
(tp_features.bright_16levels)? 15 : 7;
......@@ -5761,13 +5863,25 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
return 0;
}
static void brightness_suspend(pm_message_t state)
{
tpacpi_brightness_checkpoint_nvram();
}
static void brightness_shutdown(void)
{
tpacpi_brightness_checkpoint_nvram();
}
static void brightness_exit(void)
{
if (ibm_backlight_device) {
vdbg_printk(TPACPI_DBG_EXIT,
vdbg_printk(TPACPI_DBG_EXIT | TPACPI_DBG_BRGHT,
"calling backlight_device_unregister()\n");
backlight_device_unregister(ibm_backlight_device);
}
tpacpi_brightness_checkpoint_nvram();
}
static int brightness_read(char *p)
......@@ -5814,6 +5928,9 @@ static int brightness_write(char *buf)
return -EINVAL;
}
tpacpi_disclose_usertask("procfs brightness",
"set level to %d\n", level);
/*
* Now we know what the final level should be, so we try to set it.
* Doing it this way makes the syscall restartable in case of EINTR
......@@ -5827,6 +5944,8 @@ static struct ibm_struct brightness_driver_data = {
.read = brightness_read,
.write = brightness_write,
.exit = brightness_exit,
.suspend = brightness_suspend,
.shutdown = brightness_shutdown,
};
/*************************************************************************
......@@ -7465,10 +7584,10 @@ module_param_named(fan_control, fan_control_allowed, bool, 0);
MODULE_PARM_DESC(fan_control,
"Enables setting fan parameters features when true");
module_param_named(brightness_mode, brightness_mode, int, 0);
module_param_named(brightness_mode, brightness_mode, uint, 0);
MODULE_PARM_DESC(brightness_mode,
"Selects brightness control strategy: "
"0=auto, 1=EC, 2=CMOS, 3=both");
"0=auto, 1=EC, 2=UCMS, 3=EC+NVRAM");
module_param(brightness_enable, uint, 0);
MODULE_PARM_DESC(brightness_enable,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment