Skip to content

L
linux-davinci
Commit 0c401df3 authored by Jonathan Corbet's avatar Jonathan Corbet
Browse files
Options

cris: cdev lock_kernel() pushdown 

Push the cdev lock_kernel() call into cris drivers.
Signed-off-by: default avatarJonathan Corbet <corbet@lwn.net>
parent 75bd2ef1
Show whitespace changes
Inline Side-by-side
Showing with 52 additions and 27 deletions
arch/cris/arch-v10/drivers/gpio.c
View file @ 0c401df3
......@@ -16,6 +16,7 @@
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/poll.h>
#include <linux/init.h>
......@@ -323,6 +324,7 @@ gpio_open(struct inode *inode, struct file *filp)
if (!priv)
return -ENOMEM;
lock_kernel();
priv->minor = p;
/* initialize the io/alarm struct */
......@@ -357,6 +359,7 @@ gpio_open(struct inode *inode, struct file *filp)
alarmlist = priv;
spin_unlock_irqrestore(&gpio_lock, flags);
unlock_kernel();
return 0;
}
......
arch/cris/arch-v10/drivers/sync_serial.c
View file @ 0c401df3
......@@ -21,6 +21,7 @@
#include <linux/interrupt.h>
#include <linux/poll.h>
#include <linux/init.h>
#include <linux/smp_lock.h>
#include <linux/timer.h>
#include <asm/irq.h>
#include <asm/dma.h>
......@@ -443,18 +444,21 @@ static int sync_serial_open(struct inode *inode, struct file *file)
int dev = MINOR(inode->i_rdev);
struct sync_port *port;
int mode;
int err = -EBUSY;
lock_kernel();
DEBUG(printk(KERN_DEBUG "Open sync serial port %d\n", dev));
if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) {
DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev));
return -ENODEV;
err = -ENODEV;
goto out;
}
port = &ports[dev];
/* Allow open this device twice (assuming one reader and one writer) */
if (port->busy == 2) {
DEBUG(printk(KERN_DEBUG "Device is busy.. \n"));
return -EBUSY;
goto out;
}
if (port->init_irqs) {
if (port->use_dma) {
......@@ -465,14 +469,14 @@ static int sync_serial_open(struct inode *inode, struct file *file)
&ports[0])) {
printk(KERN_CRIT "Can't alloc "
"sync serial port 1 IRQ");
return -EBUSY;
goto out;
} else if (request_irq(25, rx_interrupt, 0,
"synchronous serial 1 dma rx",
&ports[0])) {
free_irq(24, &port[0]);
printk(KERN_CRIT "Can't alloc "
"sync serial port 1 IRQ");
return -EBUSY;
goto out;
} else if (cris_request_dma(8,
"synchronous serial 1 dma tr",
DMA_VERBOSE_ON_ERROR,
......@@ -482,7 +486,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
printk(KERN_CRIT "Can't alloc "
"sync serial port 1 "
"TX DMA channel");
return -EBUSY;
goto out;
} else if (cris_request_dma(9,
"synchronous serial 1 dma rec",
DMA_VERBOSE_ON_ERROR,
......@@ -493,7 +497,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
printk(KERN_CRIT "Can't alloc "
"sync serial port 1 "
"RX DMA channel");
return -EBUSY;
goto out;
}
#endif
RESET_DMA(8); WAIT_DMA(8);
......@@ -520,14 +524,14 @@ static int sync_serial_open(struct inode *inode, struct file *file)
&ports[1])) {
printk(KERN_CRIT "Can't alloc "
"sync serial port 3 IRQ");
return -EBUSY;
goto out;
} else if (request_irq(21, rx_interrupt, 0,
"synchronous serial 3 dma rx",
&ports[1])) {
free_irq(20, &ports[1]);
printk(KERN_CRIT "Can't alloc "
"sync serial port 3 IRQ");
return -EBUSY;
goto out;
} else if (cris_request_dma(4,
"synchronous serial 3 dma tr",
DMA_VERBOSE_ON_ERROR,
......@@ -537,7 +541,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
printk(KERN_CRIT "Can't alloc "
"sync serial port 3 "
"TX DMA channel");
return -EBUSY;
goto out;
} else if (cris_request_dma(5,
"synchronous serial 3 dma rec",
DMA_VERBOSE_ON_ERROR,
......@@ -548,7 +552,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
printk(KERN_CRIT "Can't alloc "
"sync serial port 3 "
"RX DMA channel");
return -EBUSY;
goto out;
}
#endif
RESET_DMA(4); WAIT_DMA(4);
......@@ -581,7 +585,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
&ports[0])) {
printk(KERN_CRIT "Can't alloc "
"sync serial manual irq");
return -EBUSY;
goto out;
}
} else if (port == &ports[1]) {
if (request_irq(8,
......@@ -591,7 +595,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
&ports[1])) {
printk(KERN_CRIT "Can't alloc "
"sync serial manual irq");
return -EBUSY;
goto out;
}
}
port->init_irqs = 0;
......@@ -620,7 +624,11 @@ static int sync_serial_open(struct inode *inode, struct file *file)
*R_IRQ_MASK1_SET = 1 << port->data_avail_bit;
DEBUG(printk(KERN_DEBUG "sser%d rec started\n", dev));
}
return 0;
ret = 0;
out:
unlock_kernel();
return ret;
}
static int sync_serial_release(struct inode *inode, struct file *file)
......
arch/cris/arch-v32/drivers/mach-a3/gpio.c
View file @ 0c401df3
......@@ -23,6 +23,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/smp_lock.h>
#include <asm/etraxgpio.h>
#include <hwregs/reg_map.h>
......@@ -390,6 +391,8 @@ static int gpio_open(struct inode *inode, struct file *filp)
if (!priv)
return -ENOMEM;
lock_kernel();
memset(priv, 0, sizeof(*priv));
priv->minor = p;
......@@ -412,6 +415,7 @@ static int gpio_open(struct inode *inode, struct file *filp)
spin_unlock_irq(&gpio_lock);
}
unlock_kernel();
return 0;
}
......
arch/cris/arch-v32/drivers/mach-fs/gpio.c
View file @ 0c401df3
......@@ -22,6 +22,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/smp_lock.h>
#include <asm/etraxgpio.h>
#include <hwregs/reg_map.h>
......@@ -426,9 +427,10 @@ gpio_open(struct inode *inode, struct file *filp)
return -EINVAL;
priv = kmalloc(sizeof(struct gpio_private), GFP_KERNEL);
if (!priv)
return -ENOMEM;
lock_kernel();
memset(priv, 0, sizeof(*priv));
priv->minor = p;
......@@ -449,6 +451,7 @@ gpio_open(struct inode *inode, struct file *filp)
alarmlist = priv;
spin_unlock_irq(&alarm_lock);
unlock_kernel();
return 0;
}
......
arch/cris/arch-v32/drivers/sync_serial.c
View file @ 0c401df3
......@@ -14,6 +14,7 @@
#include <linux/major.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/poll.h>
#include <linux/init.h>
......@@ -429,23 +430,26 @@ static inline int sync_data_avail_to_end(struct sync_port *port)
static int sync_serial_open(struct inode *inode, struct file *file)
{
int dev = iminor(inode);
int ret = -EBUSY;
sync_port *port;
reg_dma_rw_cfg cfg = {.en = regk_dma_yes};
reg_dma_rw_intr_mask intr_mask = {.data = regk_dma_yes};
lock_kernel();
DEBUG(printk(KERN_DEBUG "Open sync serial port %d\n", dev));
if (dev < 0 || dev >= NBR_PORTS || !ports[dev].enabled)
{
DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev));
return -ENODEV;
ret = -ENODEV;
goto out;
}
port = &ports[dev];
/* Allow open this device twice (assuming one reader and one writer) */
if (port->busy == 2)
{
DEBUG(printk(KERN_DEBUG "Device is busy.. \n"));
return -EBUSY;
goto out;
}
......@@ -459,7 +463,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
"synchronous serial 0 dma tr",
&ports[0])) {
printk(KERN_CRIT "Can't allocate sync serial port 0 IRQ");
return -EBUSY;
goto out;
} else if (request_irq(DMA_IN_INTR_VECT,
rx_interrupt,
0,
......@@ -467,7 +471,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
&ports[0])) {
free_irq(DMA_OUT_INTR_VECT, &port[0]);
printk(KERN_CRIT "Can't allocate sync serial port 0 IRQ");
return -EBUSY;
goto out;
} else if (crisv32_request_dma(OUT_DMA_NBR,
"synchronous serial 0 dma tr",
DMA_VERBOSE_ON_ERROR,
......@@ -476,7 +480,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
free_irq(DMA_OUT_INTR_VECT, &port[0]);
free_irq(DMA_IN_INTR_VECT, &port[0]);
printk(KERN_CRIT "Can't allocate sync serial port 0 TX DMA channel");
return -EBUSY;
goto out;
} else if (crisv32_request_dma(IN_DMA_NBR,
"synchronous serial 0 dma rec",
DMA_VERBOSE_ON_ERROR,
......@@ -486,7 +490,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
free_irq(DMA_OUT_INTR_VECT, &port[0]);
free_irq(DMA_IN_INTR_VECT, &port[0]);
printk(KERN_CRIT "Can't allocate sync serial port 1 RX DMA channel");
return -EBUSY;
goto out;
}
#endif
}
......@@ -499,7 +503,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
"synchronous serial 1 dma tr",
&ports[1])) {
printk(KERN_CRIT "Can't allocate sync serial port 1 IRQ");
return -EBUSY;
goto out;
} else if (request_irq(DMA7_INTR_VECT,
rx_interrupt,
0,
......@@ -507,7 +511,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
&ports[1])) {
free_irq(DMA6_INTR_VECT, &ports[1]);
printk(KERN_CRIT "Can't allocate sync serial port 3 IRQ");
return -EBUSY;
goto out;
} else if (crisv32_request_dma(
SYNC_SER1_TX_DMA_NBR,
"synchronous serial 1 dma tr",
......@@ -517,7 +521,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
free_irq(DMA6_INTR_VECT, &ports[1]);
free_irq(DMA7_INTR_VECT, &ports[1]);
printk(KERN_CRIT "Can't allocate sync serial port 3 TX DMA channel");
return -EBUSY;
goto out;
} else if (crisv32_request_dma(
SYNC_SER1_RX_DMA_NBR,
"synchronous serial 3 dma rec",
......@@ -528,7 +532,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
free_irq(DMA6_INTR_VECT, &ports[1]);
free_irq(DMA7_INTR_VECT, &ports[1]);
printk(KERN_CRIT "Can't allocate sync serial port 3 RX DMA channel");
return -EBUSY;
goto out;
}
#endif
}
......@@ -554,7 +558,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
"synchronous serial manual irq",
&ports[0])) {
printk("Can't allocate sync serial manual irq");
return -EBUSY;
goto out;
}
}
#ifdef CONFIG_ETRAXFS
......@@ -565,7 +569,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
"synchronous serial manual irq",
&ports[1])) {
printk(KERN_CRIT "Can't allocate sync serial manual irq");
return -EBUSY;
goto out;
}
}
#endif
......@@ -578,7 +582,10 @@ static int sync_serial_open(struct inode *inode, struct file *file)
} /* port->init_irqs */
port->busy++;
return 0;
ret = 0;
out:
unlock_kernel();
return ret;
}
static int sync_serial_release(struct inode *inode, struct file *file)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment