Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Came up through a quick grep for other cases similar to the ftruncate()
one in commit 0a489cb3.

Also, add a comment, so that people who read the code understand why we
do what looks like a no-op.

(Again, this won't actually matter to any sane user, since libc will
save and restore the register gcc stomps on, but it's still wrong to
stomp on it)
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Gcc thinks it owns the incoming argument stack, but that's not true for
"asmlinkage" functions, and it corrupts the caller-set-up argument stack
when it pushes the third argument onto the stack.  Which can result in
%ebx getting corrupted in user space.

Now, normally nobody sane would ever notice, since libc will save and
restore %ebx anyway over the system call, but it's still wrong.

I'd much rather have "asmlinkage" tell gcc directly that it doesn't own
the stack, but no such attribute exists, so we're stuck with our hacky
manual "prevent_tail_call()" macro once more (we've had the same issue
before with sys_waitpid() and sys_wait4()).

Thanks to Hans-Werner Hilse <hilse@sub.uni-goettingen.de> for reporting
the issue and testing the fix.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: Fix further issues in drivers/char/drm/via_irq.c
  drivers/char/drm/drm_memory.c: possible cleanups
  drm: deline a few large inlines in DRM code
  drm: remove master setting from add/remove context
  drm: drm_pci needs dma-mapping.h
  [PATCH] drm: Fix issue reported by Coverity in drivers/char/drm/via_irq.c

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

tee was already there for some reason for native 64bit, but
sys_sync_file_range was missing. Also add it to the compat layer.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Needed for some big Opteron systems to compute a numa hash function
They have more than 12 bits significant address.

TBD switch this over to dynamic allocation or use better hash
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

o Start booting into the capture kernel after an Oops if system is in a
  unrecoverable state. System will boot into the capture kernel, if one is
  pre-loaded by the user, and capture the kernel core dump.

o One of the following conditions should be true to trigger the booting of
  capture kernel.
        - panic_on_oops is set.
        - pid of current thread is 0
        - pid of current thread is 1
        - Oops happened inside interrupt context.
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The patch I submitted earlier to fix disabled LAPIC handling in ACPI
was mismerged for some reason I still don't quite understand. Parts
of it was applied to the wrong function.

This patch fixes it up.

Cc: len.brown@intel.com
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

* 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block:
  [PATCH] cfq: Further rbtree traversal and cfq_exit_queue() race fix
  [PATCH 2/2] cfq: fix cic's rbtree traversal
  [PATCH 1/2] iosched: fix typo and barrier()

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge:
  powerpc: Use correct sequence for putting CPU into nap mode
  [PATCH] spufs: fix context-switch decrementer code
  [PATCH] powerpc32: Set cpu explicitly in kernel compiles
  [PATCH] powerpc/pseries: bugfix: balance calls to pci_device_put
  [PATCH] powerpc: Fix machine detection in prom_init.c
  [PATCH] ppc32: Fix string comparing in platform_notify_map
  [PATCH] powerpc: Avoid __initcall warnings
  [PATCH] powerpc: Ensure runlatch is off in the idle loop
  powerpc: Fix CHRP booting - needs a define_machine call
  powerpc: iSeries has only 256 IRQs

In current code, we are re-reading cic->key after dead cic->key check.
So, in theory, it may really re-read *after* cfq_exit_queue() seted NULL.

To avoid race, we copy it to stack, then use it. With this change, I
guess gcc will assign cic->key to a register or stack, and it wouldn't
be re-readed.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Jens Axboe <axboe@suse.de>

We weren't using the recommended sequence for putting the CPU into
nap mode.  When I changed the idle loop, for some reason 7447A cpus
started hanging when we put them into nap mode.  Changing to the
recommended sequence fixes that.

The complexity here is that the recommended sequence is a loop that
keeps putting the cpu back into nap mode.  Clearly we need some way
to break out of the loop when an interrupt (external interrupt,
decrementer, performance monitor) occurs.  Here we use a bit in
the thread_info struct to indicate that we need this, and the exception
entry code notices this and arranges for the exception to return
to the value in the link register, thus breaking out of the loop.
We use a new `local_flags' field in the thread_info which we can
alter without needing to use an atomic update sequence.

The PPC970 has the same recommended sequence, so we do the same thing
there too.

This also fixes a bug in the kernel stack overflow handling code on
32-bit, since it was causing a value that we needed in a register to
get trashed.
Signed-off-by: Paul Mackerras <paulus@samba.org>

Fix de-reference of 'dev_priv' before NULL check.
Signed-off-by: Jayachandran C. <c.jayachandran@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@osdl.org>

- #if 0 the following unused global function:
  - drm_ioremap_nocache()

- make the following needlessly global functions static:
  - agp_remap()
  - drm_lookup_map()
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@osdl.org>

When queue dies, we set cic->key=NULL as dead mark. So, when we
traverse a rbtree, we must check whether it's still valid key. if it
was invalidated, drop it, then restart the traversal from top.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Jens Axboe <axboe@suse.de>

On rmmod path, cfq/as waits to make sure all io-contexts was
freed. However, it's using complete(), not wait_for_completion().

I think barrier() is not enough in here. To avoid the following case,
this patch replaces barrier() with smb_wmb().

	cpu0			visibility			cpu1
	                [ioc_gnone=NULL,ioc_count=1]

ioc_gnone = &all_gone		NULL,ioc_count=1
atomic_read(&ioc_count)		NULL,ioc_count=1
wait_for_completion()		NULL,ioc_count=0	atomic_sub_and_test()
				NULL,ioc_count=0	if ( && ioc_gone)
						    [ioc_gone==NULL,
						    so doesn't call complete()]
			   &all_gone,ioc_count=0
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Jens Axboe <axboe@suse.de>

grow_ary() should not copy struct ipc_id_ary (it copies new->p, not
new). Due to this, memcpy() src pointer could hit unmapped vmalloc page
when near page boundary.

Found during OpenVZ stress testing
Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

madvise_remove needs to respect file and mmap protections.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
[ Will the real CVE-2006-1524 stand up, please.. ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [IPV4]: ip_route_input panic fix

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/stable-2.6:
  [PATCH] shmat: stop mprotect from giving write permission to a readonly attachment (CVE-2006-1524)
  [PATCH] cciss: bug fix for crash when running hpacucli
  [PATCH] ext3: Fix missed mutex unlock
  [PATCH] Fix block device symlink name
  [PATCH] isd200: limit to BLK_DEV_IDE

This fixes http://bugzilla.kernel.org/show_bug.cgi?id=6388
The bug is caused by ip_route_input dereferencing skb->nh.protocol of
the dummy skb passed dow from inet_rtm_getroute (Thanks Thomas for seeing
it). It only happens if the route requested is for a multicast IP
address.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

I found that all of 2.4 and 2.6 have been letting mprotect give write
permission to a readonly attachment of shared memory, whether or not IPC
would give the caller that permission.

SUS says "The behaviour of this function [mprotect] is unspecified if the
mapping was not established by a call to mmap", but I don't think we can
interpret that as allowing it to subvert IPC permissions.

I haven't tried 2.2, but the 2.2.26 source looks like it gets it right; and
the patch below reproduces that behaviour - mprotect cannot be used to add
write permission to a shared memory segment attached readonly.

This patch is simple, and I'm sure it's what we should have done in 2.4.0:
if you want to go on to switch write permission on and off with mprotect,
just don't attach the segment readonly in the first place.

However, we could have accumulated apps which attach readonly (even though
they would be permitted to attach read/write), and which subsequently use
mprotect to switch write permission on and off: it's not unreasonable.

I was going to add a second ipcperms check in do_shmat, to check for
writable when readonly, and if not writable find_vma and clear VM_MAYWRITE.
 But security_ipc_permission might do auditing, and it seems wrong to
report an attempt for write permission when there has been none.  Or we
could flag the vma as SHM, note the shmid or shp in vm_private_data, and
then get mprotect to check.

But the patch below is a lot simpler: I'd rather stick with it, if we can
convince ourselves somehow that it'll be safe.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fix a crash when running hpacucli with multiple logical volumes on a cciss
controller.  We were not properly initializing the disk->queue and causing
a fault.

Thanks to Hasso Tepper for reporting the problem.  Thanks to Steve Cameron
for root causing the problem.  Most of the patch just moves things around.
The fix is a one-liner.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Stephen Cameron <steve.cameron@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Missed unlock_super()call is added in error condition code path.
Signed-off-by: Leonid Ananiev <leonid.i.ananiev@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

As noted further on the this file, some block devices have a / in their
name, so fix the "block:..." symlink name the same as the /sys/block name.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Limit USB_STORAGE_ISD200 to whatever BLK_DEV_IDE and USB_STORAGE
are set to (y, m) since isd200 calls ide_fix_driveid() in the
BLK_DEV_IDE code.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

SYM2 driver uses it.
Signed-off-by: David S. Miller <davem@davemloft.net>

* master.kernel.org:/home/rmk/linux-2.6-serial:
  [SERIAL] Update serial driver documentation

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3477/1: ARM EABI: undefine removed syscalls
  [ARM] 3475/1: S3C2410: fix spelling mistake in SMDK partition table
  [ARM] 3474/1: S3C2440: USB rate writes wrong var to CLKDIVN

Improve serial driver documentation:
- Remove CVS id.
- Update pointer to reference driver documentation.
- Add comments about new uart_write_console function.
- Add TIOCM_LOOP modem control bit description.
- Add commentry about enable_ms method being called multiple times.
- Add commentry about startup/shutdown method calling.
- Mention that dereferencing port->info after shutdown is invalid.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Nicolas Pitre

Avoid confusion for libraries assuming that a given syscall is available
when corresponding symbol is defined.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The at91_cf driver got out of sync with certain changes in the PCMCIA
layer, notably getting rid of some duplication of data ... causing the
version merged to kernel.org to fail compiling.

This patch gives the at91_cf platform device a new iomem resource, using
it so this new pcmcia scheme works.  It also cleans up some whitepsace
bugs that have accumulated over time (mostly too-long lines).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Somehow in the midst of dotting i's and crossing t's during
the merge up to rc1 we wound up keeping __put_task_struct_cb
when it should have been killed as it no longer has any users.
Sorry I probably should have caught this while it was
still in the -mm tree.

Having the old code there gets confusing when reading
through the code and trying to understand what is
happening.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Original patch by Benjamin Herrenschmidt after debugging by Brian Hinz.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Brian Hinz <bphinz@hotmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild:
  kbuild: fix false section mismatch warnings

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (170 commits)
  commit 3d9dd756
  Author: Zach Brown <zach.brown@oracle.com>
  Date:   Fri Apr 14 16:04:18 2006 -0700
  
      [PATCH] ip_output: account for fraggap when checking to add trailer_len
      
      During other work I noticed that ip_append_data() seemed to be forgetting to
      include the frag gap in its calculation of a fragment that consumes the rest of
      the payload.  Herbert confirmed that this was a bug that snuck in during a
      previous rework.
Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
  
  commit 08d09997
  Author: Linus Walleij <triad@df.lth.se>
  Date:   Fri Apr 14 16:03:33 2006 -0700
  
      [IRDA]: smsc-ircc2, smcinit support for ALi ISA bridges
      
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  commit 5fdef394
  Author: David S. Miller <davem@sunset.davemloft.net>
  Date:   Fri Apr 14 15:29:32 2006 -0700
  
      [SPARC]: Hook up sys_tee() into syscall tables.
Signed-off-by: David S. Miller <davem@davemloft.net>
  

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (679 commits)
  commit 7676f83a
  Author: James Bottomley <James.Bottomley@steeleye.com>
  Date:   Fri Apr 14 09:47:59 2006 -0500
  
      [SCSI] scsi_transport_sas: don't scan a non-existent end device
      
      Any end device that can't support any of the scanning protocols
      shouldn't be scanned, so set its id to -1 to prevent
      scsi_scan_target() being called for it.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
  
  commit 3c0c25b9
  Author: Moore, Eric <Eric.Moore@lsil.com>
  Date:   Thu Apr 13 16:08:17 2006 -0600
  
      [SCSI] mptfusion - fix panic in mptsas_slave_configure
      
      Driver panic when RAID logical volume was present when driver
      loaded, or when a RAID logical volume was created on the fly.
  ...