Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

Documentation/powerpc/booting-without-of.txt

@@ -1196,7 +1196,7 @@ platforms are moved over to use the flattened-device-tree model.
     - model : Model of the device.  Can be "TSEC", "eTSEC", or "FEC"
     - compatible : Should be "gianfar"
     - reg : Offset and length of the register set for the device
-    - address : List of bytes representing the ethernet address of
+    - mac-address : List of bytes representing the ethernet address of
       this controller
     - interrupts : <a b> where a is the interrupt number and b is a
       field that represents an encoding of the sense and level
@@ -1216,7 +1216,7 @@ platforms are moved over to use the flattened-device-tree model.
 		model = "TSEC";
 		compatible = "gianfar";
 		reg = <24000 1000>;
-		address = [ 00 E0 0C 00 73 00 ];
+		mac-address = [ 00 E0 0C 00 73 00 ];
 		interrupts = <d 3 e 3 12 3>;
 		interrupt-parent = <40000>;
 		phy-handle = <2452000>
@@ -1498,7 +1498,7 @@ not necessary as they are usually the same as the root node.
 			model = "TSEC";
 			compatible = "gianfar";
 			reg = <24000 1000>;
-			address = [ 00 E0 0C 00 73 00 ];
+			mac-address = [ 00 E0 0C 00 73 00 ];
 			interrupts = <d 3 e 3 12 3>;
 			interrupt-parent = <40000>;
 			phy-handle = <2452000>;
@@ -1511,7 +1511,7 @@ not necessary as they are usually the same as the root node.
 			model = "TSEC";
 			compatible = "gianfar";
 			reg = <25000 1000>;
-			address = [ 00 E0 0C 00 73 01 ];
+			mac-address = [ 00 E0 0C 00 73 01 ];
 			interrupts = <13 3 14 3 18 3>;
 			interrupt-parent = <40000>;
 			phy-handle = <2452001>;
@@ -1524,7 +1524,7 @@ not necessary as they are usually the same as the root node.
 			model = "FEC";
 			compatible = "gianfar";
 			reg = <26000 1000>;
-			address = [ 00 E0 0C 00 73 02 ];
+			mac-address = [ 00 E0 0C 00 73 02 ];
 			interrupts = <19 3>;
 			interrupt-parent = <40000>;
 			phy-handle = <2452002>;

arch/powerpc/Kconfig

@@ -836,9 +836,10 @@ config MCA
 	bool
 
 config PCI
-	bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) \
-				  || MPC7448HPC2
-	default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !PPC_85xx && !PPC_86xx
+	bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \
+		|| PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) || MPC7448HPC2
+	default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx \
+		&& !PPC_85xx && !PPC_86xx
 	default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
 	default PCI_QSPAN if !4xx && !CPM2 && 8xx
 	help

arch/powerpc/boot/dts/mpc8641_hpcn.dts

+/*
+ * MPC8641 HPCN Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+	model = "MPC8641HPCN";
+	compatible = "mpc86xx";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#cpus = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8641@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;	// 33 MHz, from uboot
+			bus-frequency = <0>;		// From uboot
+			clock-frequency = <0>;		// From uboot
+			32-bit;
+			linux,boot-cpu;
+		};
+		PowerPC,8641@1 {
+			device_type = "cpu";
+			reg = <1>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;	// 33 MHz, from uboot
+			bus-frequency = <0>;		// From uboot
+			clock-frequency = <0>;		// From uboot
+			32-bit;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 40000000>;	// 1G at 0x0
+	};
+
+	soc8641@f8000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 f8000000 00100000>;
+		reg = <f8000000 00100000>;	// CCSRBAR 1M
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <2b 2>;
+			interrupt-parent = <40000>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3100 100>;
+			interrupts = <2b 2>;
+			interrupt-parent = <40000>;
+			dfsrr;
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			linux,phandle = <24520>;
+			ethernet-phy@0 {
+				linux,phandle = <2452000>;
+				interrupt-parent = <40000>;
+				interrupts = <4a 1>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <40000>;
+				interrupts = <4a 1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@2 {
+				linux,phandle = <2452002>;
+				interrupt-parent = <40000>;
+				interrupts = <4a 1>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@3 {
+				linux,phandle = <2452003>;
+				interrupt-parent = <40000>;
+				interrupts = <4a 1>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			mac-address = [ 00 E0 0C 00 73 00 ];
+			interrupts = <1d 2 1e 2 22 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452000>;
+		};
+
+		ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			mac-address = [ 00 E0 0C 00 73 01 ];
+			interrupts = <23 2 24 2 28 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452001>;
+		};
+		
+		ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <26000 1000>;
+			mac-address = [ 00 E0 0C 00 02 FD ];
+			interrupts = <1F 2 20 2 21 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452002>;
+		};
+
+		ethernet@27000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <27000 1000>;
+			mac-address = [ 00 E0 0C 00 03 FD ];
+			interrupts = <25 2 26 2 27 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452003>;
+		};
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>;
+			clock-frequency = <0>;
+			interrupts = <2a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;
+			clock-frequency = <0>;
+			interrupts = <1c 2>;
+			interrupt-parent = <40000>;
+		};
+
+		pci@8000 {
+			compatible = "86xx";
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8000 1000>;
+			bus-range = <0 fe>;
+			ranges = <02000000 0 80000000 80000000 0 20000000
+				  01000000 0 00000000 e2000000 0 00100000>;
+			clock-frequency = <1fca055>;
+			interrupt-parent = <40000>;
+			interrupts = <18 2>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x11 */
+				8800 0 0 1 4d0 3 2
+				8800 0 0 2 4d0 4 2
+				8800 0 0 3 4d0 5 2
+				8800 0 0 4 4d0 6 2
+
+				/* IDSEL 0x12 */
+				9000 0 0 1 4d0 4 2
+				9000 0 0 2 4d0 5 2
+				9000 0 0 3 4d0 6 2
+				9000 0 0 4 4d0 3 2
+
+				/* IDSEL 0x13 */
+				9800 0 0 1 4d0 0 0
+				9800 0 0 2 4d0 0 0
+				9800 0 0 3 4d0 0 0
+				9800 0 0 4 4d0 0 0
+
+				/* IDSEL 0x14 */
+				a000 0 0 1 4d0 0 0
+				a000 0 0 2 4d0 0 0
+				a000 0 0 3 4d0 0 0
+				a000 0 0 4 4d0 0 0
+
+				/* IDSEL 0x15 */
+				a800 0 0 1 4d0 0 0
+				a800 0 0 2 4d0 0 0
+				a800 0 0 3 4d0 0 0
+				a800 0 0 4 4d0 0 0
+
+				/* IDSEL 0x16 */
+				b000 0 0 1 4d0 0 0
+				b000 0 0 2 4d0 0 0
+				b000 0 0 3 4d0 0 0
+				b000 0 0 4 4d0 0 0
+
+				/* IDSEL 0x17 */
+				b800 0 0 1 4d0 0 0
+				b800 0 0 2 4d0 0 0
+				b800 0 0 3 4d0 0 0
+				b800 0 0 4 4d0 0 0
+
+				/* IDSEL 0x18 */
+				c000 0 0 1 4d0 0 0
+				c000 0 0 2 4d0 0 0
+				c000 0 0 3 4d0 0 0
+				c000 0 0 4 4d0 0 0
+
+				/* IDSEL 0x19 */
+				c800 0 0 1 4d0 0 0
+				c800 0 0 2 4d0 0 0
+				c800 0 0 3 4d0 0 0
+				c800 0 0 4 4d0 0 0
+
+				/* IDSEL 0x1a */
+				d000 0 0 1 4d0 6 2
+				d000 0 0 2 4d0 3 2
+				d000 0 0 3 4d0 4 2
+				d000 0 0 4 4d0 5 2
+
+
+				/* IDSEL 0x1b */
+				d800 0 0 1 4d0 5 2
+				d800 0 0 2 4d0 0 0
+				d800 0 0 3 4d0 0 0
+				d800 0 0 4 4d0 0 0
+
+				/* IDSEL 0x1c */
+				e000 0 0 1 4d0 9 2
+				e000 0 0 2 4d0 a 2
+				e000 0 0 3 4d0 c 2
+				e000 0 0 4 4d0 7 2
+
+				/* IDSEL 0x1d */
+				e800 0 0 1 4d0 9 2
+				e800 0 0 2 4d0 a 2
+				e800 0 0 3 4d0 b 2
+				e800 0 0 4 4d0 0 0
+
+				/* IDSEL 0x1e */
+				f000 0 0 1 4d0 c 2
+				f000 0 0 2 4d0 0 0
+				f000 0 0 3 4d0 0 0
+				f000 0 0 4 4d0 0 0
+
+				/* IDSEL 0x1f */
+				f800 0 0 1 4d0 6 2
+				f800 0 0 2 4d0 0 0
+				f800 0 0 3 4d0 0 0
+				f800 0 0 4 4d0 0 0
+				>;
+			i8259@4d0 {
+				linux,phandle = <4d0>;
+				clock-frequency = <0>;
+				interrupt-controller;
+				device_type = "interrupt-controller";
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				built-in;
+				compatible = "chrp,iic";
+                	        big-endian;
+				interrupts = <49 2>;
+				interrupt-parent = <40000>;
+			};
+
+		};
+		pic@40000 {
+			linux,phandle = <40000>;
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <40000 40000>;
+			built-in;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+                        big-endian;
+			interrupts = <
+				10 2 11 2 12 2 13 2
+				14 2 15 2 16 2 17 2
+				18 2 19 2 1a 2 1b 2
+				1c 2 1d 2 1e 2 1f 2
+				20 2 21 2 22 2 23 2
+				24 2 25 2 26 2 27 2
+				28 2 29 2 2a 2 2b 2
+				2c 2 2d 2 2e 2 2f 2
+				30 2 31 2 32 2 33 2
+				34 2 35 2 36 2 37 2
+				38 2 39 2 2a 2 3b 2
+				3c 2 3d 2 3e 2 3f 2
+				48 1 49 2 4a 1
+				>;
+			interrupt-parent = <40000>;
+		};
+	};
+};

arch/powerpc/configs/g5_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc1
-# Wed Apr 19 13:24:37 2006
+# Linux kernel version: 2.6.18-rc3
+# Tue Aug  8 09:12:29 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
@@ -33,6 +35,7 @@ CONFIG_PPC_STD_MMU=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=4
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -50,6 +53,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
@@ -67,10 +71,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -116,12 +122,16 @@ CONFIG_PPC_PMAC=y
 CONFIG_PPC_PMAC64=y
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_U3_DART=y
 CONFIG_MPIC=y
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_MPIC_BROKEN_U3=y
 # CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_970_NAP=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
@@ -153,6 +163,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
 # CONFIG_HOTPLUG_CPU is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
@@ -168,6 +179,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
 # CONFIG_PPC_64K_PAGES is not set
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
@@ -184,6 +196,7 @@ CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -227,6 +240,8 @@ CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -239,6 +254,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -263,6 +279,7 @@ CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 # CONFIG_IP_NF_PPTP is not set
 # CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
 CONFIG_IP_NF_QUEUE=m
 
 #
@@ -318,6 +335,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -355,6 +373,7 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -417,7 +436,6 @@ CONFIG_IDEDMA_PCI_AUTO=y
 CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
-# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_IVB is not set
@@ -478,6 +496,7 @@ CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_SATA_MV is not set
 # CONFIG_SCSI_SATA_NV is not set
 # CONFIG_SCSI_PDC_ADMA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_SATA_QSTOR is not set
 # CONFIG_SCSI_SATA_PROMISE is not set
 # CONFIG_SCSI_SATA_SX4 is not set
@@ -497,7 +516,6 @@ CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
@@ -514,9 +532,7 @@ CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-CONFIG_MD_RAID6=m
+# CONFIG_MD_RAID456 is not set
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
@@ -559,7 +575,6 @@ CONFIG_IEEE1394_OHCI1394=y
 #
 CONFIG_IEEE1394_VIDEO1394=m
 CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
 CONFIG_IEEE1394_ETH1394=m
 CONFIG_IEEE1394_DV1394=m
 CONFIG_IEEE1394_RAWIO=y
@@ -573,6 +588,7 @@ CONFIG_IEEE1394_RAWIO=y
 # Macintosh device drivers
 #
 CONFIG_ADB_PMU=y
+# CONFIG_ADB_PMU_LED is not set
 CONFIG_PMAC_SMU=y
 CONFIG_THERM_PM72=y
 CONFIG_WINDFARM=y
@@ -643,6 +659,7 @@ CONFIG_TIGON3=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -739,6 +756,7 @@ CONFIG_SERIO=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -754,6 +772,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
 
 #
 # IPMI
@@ -764,6 +783,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
@@ -774,6 +794,7 @@ CONFIG_GEN_RTC=y
 # Ftape, the floppy tape device driver
 #
 CONFIG_AGP=m
+# CONFIG_AGP_SIS is not set
 # CONFIG_AGP_VIA is not set
 CONFIG_AGP_UNINORTH=m
 # CONFIG_DRM is not set
@@ -813,6 +834,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
@@ -849,7 +871,6 @@ CONFIG_I2C_POWERMAC=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -865,6 +886,7 @@ CONFIG_I2C_POWERMAC=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -875,22 +897,19 @@ CONFIG_I2C_POWERMAC=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 CONFIG_FB_MACMODES=y
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
 CONFIG_FB_OF=y
-# CONFIG_FB_CONTROL is not set
-# CONFIG_FB_PLATINUM is not set
-# CONFIG_FB_VALKYRIE is not set
-# CONFIG_FB_CT65550 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 # CONFIG_FB_VGA16 is not set
@@ -990,6 +1009,18 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1026,6 +1057,17 @@ CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_POWERMAC=m
 CONFIG_SND_POWERMAC_AUTO_DRC=y
 
+#
+# Apple Onboard Audio driver
+#
+CONFIG_SND_AOA=m
+CONFIG_SND_AOA_FABRIC_LAYOUT=m
+CONFIG_SND_AOA_ONYX=m
+CONFIG_SND_AOA_TAS=m
+CONFIG_SND_AOA_TOONIE=m
+CONFIG_SND_AOA_SOUNDBUS=m
+CONFIG_SND_AOA_SOUNDBUS_I2S=m
+
 #
 # USB devices
 #
@@ -1060,6 +1102,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
@@ -1110,9 +1153,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -1155,6 +1196,7 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
@@ -1162,6 +1204,7 @@ CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
 CONFIG_USB_SERIAL_IR=m
@@ -1191,9 +1234,11 @@ CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
 CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 CONFIG_USB_SERIAL_TI=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EZUSB=y
 
@@ -1207,10 +1252,12 @@ CONFIG_USB_EZUSB=y
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+CONFIG_USB_APPLEDISPLAY=m
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
@@ -1234,6 +1281,14 @@ CONFIG_USB_EZUSB=y
 #
 # CONFIG_NEW_LEDS is not set
 
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
 #
 # InfiniBand support
 #
@@ -1248,6 +1303,19 @@ CONFIG_USB_EZUSB=y
 #
 # CONFIG_RTC_CLASS is not set
 
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
 #
 # File systems
 #
@@ -1273,7 +1341,6 @@ CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
@@ -1282,6 +1349,7 @@ CONFIG_XFS_POSIX_ACL=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
@@ -1363,7 +1431,9 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
 # CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1444,6 +1514,9 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
@@ -1457,14 +1530,19 @@ CONFIG_OPROFILE=y
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
@@ -1476,11 +1554,7 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_DEBUGGER is not set
 CONFIG_IRQSTACKS=y
 CONFIG_BOOTX_TEXT=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options

arch/powerpc/configs/iseries_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc1
-# Wed Apr 19 11:46:44 2006
+# Linux kernel version: 2.6.18-rc3
+# Tue Aug  8 09:15:46 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
@@ -34,6 +36,7 @@ CONFIG_PPC_STD_MMU=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=32
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -51,6 +54,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 CONFIG_AUDIT=y
 CONFIG_AUDITSYSCALL=y
@@ -69,10 +73,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -113,10 +119,14 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_PPC_ISERIES=y
 # CONFIG_EMBEDDED6xx is not set
 # CONFIG_APUS is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_IBMVIO=y
 # CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
 
@@ -135,6 +145,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_LPARCFG=y
 # CONFIG_NUMA is not set
@@ -149,6 +160,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
 # CONFIG_PPC_64K_PAGES is not set
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
@@ -164,6 +176,7 @@ CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -207,6 +220,8 @@ CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -219,6 +234,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -246,9 +262,11 @@ CONFIG_NETFILTER_XT_MATCH_MARK=m
 # CONFIG_NETFILTER_XT_MATCH_POLICY is not set
 # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
@@ -267,6 +285,7 @@ CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 # CONFIG_IP_NF_PPTP is not set
 # CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
@@ -360,6 +379,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -396,6 +416,7 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -453,6 +474,7 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -464,7 +486,6 @@ CONFIG_SCSI_IBMVSCSI=m
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
@@ -481,9 +502,7 @@ CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-CONFIG_MD_RAID6=m
+# CONFIG_MD_RAID456 is not set
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
@@ -596,6 +615,7 @@ CONFIG_E1000=m
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -696,6 +716,7 @@ CONFIG_SERIAL_ICOM=m
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
 
 #
 # IPMI
@@ -706,6 +727,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
@@ -741,7 +763,6 @@ CONFIG_MAX_RAW_DEVS=256
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -757,6 +778,7 @@ CONFIG_MAX_RAW_DEVS=256
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -766,7 +788,9 @@ CONFIG_MAX_RAW_DEVS=256
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -800,6 +824,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # CONFIG_NEW_LEDS is not set
 
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
 #
 # InfiniBand support
 #
@@ -814,6 +846,19 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # CONFIG_RTC_CLASS is not set
 
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
 #
 # File systems
 #
@@ -843,7 +888,6 @@ CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
@@ -852,6 +896,7 @@ CONFIG_XFS_POSIX_ACL=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
@@ -933,8 +978,10 @@ CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1013,10 +1060,12 @@ CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
 #
+# CONFIG_PROFILING is not set
 # CONFIG_KPROBES is not set
 
 #
@@ -1024,14 +1073,19 @@ CONFIG_TEXTSEARCH_FSM=m
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
@@ -1042,11 +1096,7 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUGGER is not set
 CONFIG_IRQSTACKS=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options

arch/powerpc/configs/pseries_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc4
-# Sun May 28 07:26:56 2006
+# Linux kernel version: 2.6.18-rc3
+# Tue Aug  8 09:14:48 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -35,6 +36,7 @@ CONFIG_PPC_STD_MMU=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=128
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -52,6 +54,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 CONFIG_AUDIT=y
 CONFIG_AUDITSYSCALL=y
@@ -70,10 +73,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -118,6 +123,9 @@ CONFIG_PPC_PSERIES=y
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_XICS=y
 # CONFIG_U3_DART is not set
 CONFIG_MPIC=y
@@ -149,6 +157,7 @@ CONFIG_BINFMT_MISC=m
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
 CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
@@ -173,6 +182,7 @@ CONFIG_SPARSEMEM_EXTREME=y
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 # CONFIG_PPC_64K_PAGES is not set
 CONFIG_SCHED_SMT=y
@@ -190,6 +200,7 @@ CONFIG_PPC_I8259=y
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -238,6 +249,8 @@ CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -250,6 +263,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -277,6 +291,7 @@ CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 # CONFIG_IP_NF_PPTP is not set
 # CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
 CONFIG_IP_NF_QUEUE=m
 
 #
@@ -316,6 +331,7 @@ CONFIG_LLC=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -332,6 +348,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -352,6 +369,7 @@ CONFIG_PARPORT_PC=m
 # CONFIG_PARPORT_PC_FIFO is not set
 # CONFIG_PARPORT_PC_SUPERIO is not set
 # CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
 # CONFIG_PARPORT_1284 is not set
 
 #
@@ -376,6 +394,7 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -487,6 +506,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -508,12 +528,6 @@ CONFIG_SCSI_IPR_TRACE=y
 CONFIG_SCSI_IPR_DUMP=y
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA_FC=m
-CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA24XX=m
 CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -528,9 +542,7 @@ CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_RAID6=m
+# CONFIG_MD_RAID456 is not set
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
@@ -651,6 +663,7 @@ CONFIG_IXGB=m
 # CONFIG_IXGB_NAPI is not set
 CONFIG_S2IO=m
 # CONFIG_S2IO_NAPI is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -754,6 +767,7 @@ CONFIG_SERIO_LIBPS2=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -776,6 +790,7 @@ CONFIG_SERIAL_JSM=m
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
 # CONFIG_PRINTER is not set
 # CONFIG_PPDEV is not set
 # CONFIG_TIPAR is not set
@@ -793,6 +808,7 @@ CONFIG_HVCS=m
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
@@ -839,6 +855,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -876,7 +893,6 @@ CONFIG_I2C_ALGOBIT=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -892,6 +908,7 @@ CONFIG_I2C_ALGOBIT=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -902,19 +919,19 @@ CONFIG_I2C_ALGOBIT=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 CONFIG_FB_MACMODES=y
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
 CONFIG_FB_OF=y
-# CONFIG_FB_CT65550 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 # CONFIG_FB_VGA16 is not set
@@ -993,6 +1010,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
@@ -1083,10 +1101,12 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
@@ -1124,12 +1144,14 @@ CONFIG_USB_MON=y
 CONFIG_INFINIBAND=m
 CONFIG_INFINIBAND_USER_MAD=m
 CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
 CONFIG_INFINIBAND_MTHCA_DEBUG=y
 CONFIG_INFINIBAND_IPOIB=m
 CONFIG_INFINIBAND_IPOIB_DEBUG=y
 # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
 CONFIG_INFINIBAND_SRP=m
+# CONFIG_INFINIBAND_ISER is not set
 
 #
 # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
@@ -1140,6 +1162,19 @@ CONFIG_INFINIBAND_SRP=m
 #
 # CONFIG_RTC_CLASS is not set
 
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
 #
 # File systems
 #
@@ -1169,15 +1204,16 @@ CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
 CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -1259,8 +1295,10 @@ CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1326,6 +1364,9 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
@@ -1339,14 +1380,19 @@ CONFIG_KPROBES=y
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y

arch/powerpc/kernel/Makefile

@@ -67,9 +67,9 @@ pci64-$(CONFIG_PPC64)		+= pci_64.o pci_dn.o pci_iommu.o \
 				   pci_direct_iommu.o iomap.o
 pci32-$(CONFIG_PPC32)		:= pci_32.o
 obj-$(CONFIG_PCI)		+= $(pci64-y) $(pci32-y)
-kexec-$(CONFIG_PPC64)		:= machine_kexec_64.o crash.o
+kexec-$(CONFIG_PPC64)		:= machine_kexec_64.o
 kexec-$(CONFIG_PPC32)		:= machine_kexec_32.o
-obj-$(CONFIG_KEXEC)		+= machine_kexec.o $(kexec-y)
+obj-$(CONFIG_KEXEC)		+= machine_kexec.o crash.o $(kexec-y)
 
 ifeq ($(CONFIG_PPC_ISERIES),y)
 $(obj)/head_64.o: $(obj)/lparmap.s

arch/powerpc/kernel/cpu_setup_power4.S

@@ -76,6 +76,8 @@ _GLOBAL(__setup_cpu_ppc970)
 	mfspr	r0,SPRN_HID0
 	li	r11,5			/* clear DOZE and SLEEP */
 	rldimi	r0,r11,52,8		/* set NAP and DPM */
+	li	r11,0
+	rldimi	r0,r11,32,31		/* clear EN_ATTN */
 	mtspr	SPRN_HID0,r0
 	mfspr	r0,SPRN_HID0
 	mfspr	r0,SPRN_HID0

arch/powerpc/kernel/crash.c

@@ -44,6 +44,7 @@
 /* This keeps a track of which one is crashing cpu. */
 int crashing_cpu = -1;
 static cpumask_t cpus_in_crash = CPU_MASK_NONE;
+cpumask_t cpus_in_sr = CPU_MASK_NONE;
 
 static u32 *append_elf_note(u32 *buf, char *name, unsigned type, void *data,
 							       size_t data_len)
@@ -139,7 +140,13 @@ void crash_ipi_callback(struct pt_regs *regs)
 
 	if (ppc_md.kexec_cpu_down)
 		ppc_md.kexec_cpu_down(1, 1);
+
+#ifdef CONFIG_PPC64
 	kexec_smp_wait();
+#else
+	for (;;);	/* FIXME */
+#endif
+
 	/* NOTREACHED */
 }
 
@@ -255,7 +262,11 @@ static void crash_kexec_prepare_cpus(int cpu)
 	 *
 	 * do this if kexec in setup.c ?
 	 */
+#ifdef CONFIG_PPC64
 	smp_release_cpus();
+#else
+	/* FIXME */
+#endif
 }
 
 void crash_kexec_secondary(struct pt_regs *regs)

arch/powerpc/kernel/irq.c

@@ -693,7 +693,7 @@ unsigned int irq_radix_revmap(struct irq_host *host,
 	/* If not there, try to insert it */
 	virq = irq_find_mapping(host, hwirq);
 	if (virq != NO_IRQ)
-		radix_tree_insert(tree, virq, &irq_map[virq]);
+		radix_tree_insert(tree, hwirq, &irq_map[virq]);
  bail:
 	spin_unlock_irqrestore(&irq_big_lock, flags);
 	return virq;

arch/powerpc/kernel/kprobes.c

@@ -61,6 +61,8 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 	if (!ret) {
 		memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
 		p->opcode = *p->addr;
+		flush_icache_range((unsigned long)p->ainsn.insn,
+			(unsigned long)p->ainsn.insn + sizeof(kprobe_opcode_t));
 	}
 
 	return ret;

arch/powerpc/kernel/machine_kexec.c

@@ -13,6 +13,7 @@
 #include <linux/reboot.h>
 #include <linux/threads.h>
 #include <asm/machdep.h>
+#include <asm/lmb.h>
 
 void machine_crash_shutdown(struct pt_regs *regs)
 {
@@ -59,3 +60,58 @@ NORET_TYPE void machine_kexec(struct kimage *image)
 	}
 	for(;;);
 }
+
+static int __init early_parse_crashk(char *p)
+{
+	unsigned long size;
+
+	if (!p)
+		return 1;
+
+	size = memparse(p, &p);
+
+	if (*p == '@')
+		crashk_res.start = memparse(p + 1, &p);
+	else
+		crashk_res.start = KDUMP_KERNELBASE;
+
+	crashk_res.end = crashk_res.start + size - 1;
+
+	return 0;
+}
+early_param("crashkernel", early_parse_crashk);
+
+void __init reserve_crashkernel(void)
+{
+	unsigned long size;
+
+	if (crashk_res.start == 0)
+		return;
+
+	/* We might have got these values via the command line or the
+	 * device tree, either way sanitise them now. */
+
+	size = crashk_res.end - crashk_res.start + 1;
+
+	if (crashk_res.start != KDUMP_KERNELBASE)
+		printk("Crash kernel location must be 0x%x\n",
+				KDUMP_KERNELBASE);
+
+	crashk_res.start = KDUMP_KERNELBASE;
+	size = PAGE_ALIGN(size);
+	crashk_res.end = crashk_res.start + size - 1;
+
+	/* Crash kernel trumps memory limit */
+	if (memory_limit && memory_limit <= crashk_res.end) {
+		memory_limit = crashk_res.end + 1;
+		printk("Adjusted memory limit for crashkernel, now 0x%lx\n",
+				memory_limit);
+	}
+
+	lmb_reserve(crashk_res.start, size);
+}
+
+int overlaps_crashkernel(unsigned long start, unsigned long size)
+{
+	return (start + size) > crashk_res.start && start <= crashk_res.end;
+}

arch/powerpc/kernel/machine_kexec_64.c

@@ -10,7 +10,6 @@
  */
 
 
-#include <linux/cpumask.h>
 #include <linux/kexec.h>
 #include <linux/smp.h>
 #include <linux/thread_info.h>
@@ -21,7 +20,6 @@
 #include <asm/machdep.h>
 #include <asm/cacheflush.h>
 #include <asm/paca.h>
-#include <asm/lmb.h>
 #include <asm/mmu.h>
 #include <asm/sections.h>	/* _end */
 #include <asm/prom.h>
@@ -385,58 +383,3 @@ static int __init kexec_setup(void)
 	return 0;
 }
 __initcall(kexec_setup);
-
-static int __init early_parse_crashk(char *p)
-{
-	unsigned long size;
-
-	if (!p)
-		return 1;
-
-	size = memparse(p, &p);
-
-	if (*p == '@')
-		crashk_res.start = memparse(p + 1, &p);
-	else
-		crashk_res.start = KDUMP_KERNELBASE;
-
-	crashk_res.end = crashk_res.start + size - 1;
-
-	return 0;
-}
-early_param("crashkernel", early_parse_crashk);
-
-void __init reserve_crashkernel(void)
-{
-	unsigned long size;
-
-	if (crashk_res.start == 0)
-		return;
-
-	/* We might have got these values via the command line or the
-	 * device tree, either way sanitise them now. */
-
-	size = crashk_res.end - crashk_res.start + 1;
-
-	if (crashk_res.start != KDUMP_KERNELBASE)
-		printk("Crash kernel location must be 0x%x\n",
-				KDUMP_KERNELBASE);
-
-	crashk_res.start = KDUMP_KERNELBASE;
-	size = PAGE_ALIGN(size);
-	crashk_res.end = crashk_res.start + size - 1;
-
-	/* Crash kernel trumps memory limit */
-	if (memory_limit && memory_limit <= crashk_res.end) {
-		memory_limit = crashk_res.end + 1;
-		printk("Adjusted memory limit for crashkernel, now 0x%lx\n",
-				memory_limit);
-	}
-
-	lmb_reserve(crashk_res.start, size);
-}
-
-int overlaps_crashkernel(unsigned long start, unsigned long size)
-{
-	return (start + size) > crashk_res.start && start <= crashk_res.end;
-}

arch/powerpc/kernel/rtas.c

@@ -569,6 +569,27 @@ int rtas_set_indicator(int indicator, int index, int new_value)
 }
 EXPORT_SYMBOL(rtas_set_indicator);
 
+/*
+ * Ignoring RTAS extended delay
+ */
+int rtas_set_indicator_fast(int indicator, int index, int new_value)
+{
+	int rc;
+	int token = rtas_token("set-indicator");
+
+	if (token == RTAS_UNKNOWN_SERVICE)
+		return -ENOENT;
+
+	rc = rtas_call(token, 3, 1, NULL, indicator, index, new_value);
+
+	WARN_ON(rc == -2 || (rc >= 9900 && rc <= 9905));
+
+	if (rc < 0)
+		return rtas_error_rc(rc);
+
+	return rc;
+}
+
 void rtas_restart(char *cmd)
 {
 	if (rtas_flash_term_hook)

arch/powerpc/kernel/traps.c

@@ -55,9 +55,6 @@
 
 #ifdef CONFIG_PPC64	/* XXX */
 #define _IO_BASE	pci_io_base
-#ifdef CONFIG_KEXEC
-cpumask_t cpus_in_sr = CPU_MASK_NONE;
-#endif
 #endif
 
 #ifdef CONFIG_DEBUGGER
@@ -211,6 +208,19 @@ void system_reset_exception(struct pt_regs *regs)
 
 	die("System Reset", regs, SIGABRT);
 
+	/*
+	 * Some CPUs when released from the debugger will execute this path.
+	 * These CPUs entered the debugger via a soft-reset. If the CPU was
+	 * hung before entering the debugger it will return to the hung
+	 * state when exiting this function.  This causes a problem in
+	 * kdump since the hung CPU(s) will not respond to the IPI sent
+	 * from kdump. To prevent the problem we call crash_kexec_secondary()
+	 * here. If a kdump had not been initiated or we exit the debugger
+	 * with the "exit and recover" command (x) crash_kexec_secondary()
+	 * will return after 5ms and the CPU returns to its previous state.
+	 */
+	crash_kexec_secondary(regs);
+
 	/* Must die if the interrupt is not recoverable */
 	if (!(regs->msr & MSR_RI))
 		panic("Unrecoverable System Reset");

arch/powerpc/platforms/pseries/setup.c

@@ -213,8 +213,6 @@ static void pseries_lpar_enable_pmcs(void)
 {
 	unsigned long set, reset;
 
-	power4_enable_pmcs();
-
 	set = 1UL << 63;
 	reset = 0;
 	plpar_hcall_norets(H_PERFMON, set, reset);

arch/powerpc/platforms/pseries/xics.c

@@ -467,7 +467,7 @@ void xics_setup_cpu(void)
 	 *
 	 * XXX: undo of teardown on kexec needs this too, as may hotplug
 	 */
-	rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE,
+	rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE,
 		(1UL << interrupt_server_size) - 1 - default_distrib_server, 1);
 }
 
@@ -796,7 +796,7 @@ void xics_teardown_cpu(int secondary)
 	 * so leave the master cpu in the group.
 	 */
 	if (secondary)
-		rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE,
+		rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE,
 				   (1UL << interrupt_server_size) - 1 -
 				   default_distrib_server, 0);
 }
@@ -813,7 +813,7 @@ void xics_migrate_irqs_away(void)
 	xics_set_cpu_priority(cpu, 0);
 
 	/* remove ourselves from the global interrupt queue */
-	status = rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE,
+	status = rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE,
 		(1UL << interrupt_server_size) - 1 - default_distrib_server, 0);
 	WARN_ON(status < 0);
 

arch/powerpc/sysdev/fsl_soc.c

@@ -169,8 +169,16 @@ static int __init gfar_of_init(void)
 			goto err;
 		}
 
-		mac_addr = get_property(np, "address", NULL);
-		memcpy(gfar_data.mac_addr, mac_addr, 6);
+		mac_addr = get_property(np, "local-mac-address", NULL);
+		if (mac_addr == NULL)
+			mac_addr = get_property(np, "mac-address", NULL);
+		if (mac_addr == NULL) {
+			/* Obsolete */
+			mac_addr = get_property(np, "address", NULL);
+		}
+
+		if (mac_addr)
+			memcpy(gfar_data.mac_addr, mac_addr, 6);
 
 		if (model && !strcasecmp(model, "TSEC"))
 			gfar_data.device_flags =

include/asm-powerpc/kexec.h

@@ -32,6 +32,7 @@
 #endif
 
 #ifndef __ASSEMBLY__
+#include <linux/cpumask.h>
 
 #ifdef CONFIG_KEXEC
 
@@ -109,7 +110,6 @@ static inline void crash_setup_regs(struct pt_regs *newregs,
 
 #define MAX_NOTE_BYTES 1024
 
-#ifdef __powerpc64__
 extern void kexec_smp_wait(void);	/* get and clear naca physid, wait for
 					  master to copy new code to 0 */
 extern int crashing_cpu;
@@ -119,7 +119,6 @@ static inline int kexec_sr_activated(int cpu)
 {
 	return cpu_isset(cpu,cpus_in_sr);
 }
-#endif /* __powerpc64 __ */
 
 struct kimage;
 struct pt_regs;

include/asm-powerpc/rtas.h

@@ -170,6 +170,7 @@ extern int rtas_get_sensor(int sensor, int index, int *state);
 extern int rtas_get_power_level(int powerdomain, int *level);
 extern int rtas_set_power_level(int powerdomain, int level, int *setlevel);
 extern int rtas_set_indicator(int indicator, int index, int new_value);
+extern int rtas_set_indicator_fast(int indicator, int index, int new_value);
 extern void rtas_progress(char *s, unsigned short hex);
 extern void rtas_initialize(void);