[netdrvr tulip] Remove ULi-specific code from generic tulip driver

It has a separate driver now, 'uli526x'.

drivers/net/tulip/media.c

@@ -81,25 +81,6 @@ int tulip_mdio_read(struct net_device *dev, int phy_id, int location)
 		return retval & 0xffff;
 	}
 
-	if(tp->chip_id == ULI526X && tp->revision >= 0x40) {
-		int value;
-		int i = 1000;
-		
-		value = ioread32(ioaddr + CSR9);
-		iowrite32(value & 0xFFEFFFFF, ioaddr + CSR9);
-		
-		value = (phy_id << 21) | (location << 16) | 0x08000000;
-		iowrite32(value, ioaddr + CSR10);
-		
-		while(--i > 0) {
-			mdio_delay();
-			if(ioread32(ioaddr + CSR10) & 0x10000000)
-				break;
-		}
-		retval = ioread32(ioaddr + CSR10);
-		spin_unlock_irqrestore(&tp->mii_lock, flags);
-		return retval & 0xFFFF;
-	}
 	/* Establish sync by sending at least 32 logic ones. */
 	for (i = 32; i >= 0; i--) {
 		iowrite32(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr);
@@ -159,23 +140,6 @@ void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int val)
 		spin_unlock_irqrestore(&tp->mii_lock, flags);
 		return;
 	}
-	if (tp->chip_id == ULI526X && tp->revision >= 0x40) {
-		int value;
-		int i = 1000;
-		
-		value = ioread32(ioaddr + CSR9);
-		iowrite32(value & 0xFFEFFFFF, ioaddr + CSR9);
-		
-		value = (phy_id << 21) | (location << 16) | 0x04000000 | (val & 0xFFFF);
-		iowrite32(value, ioaddr + CSR10);
-		
-		while(--i > 0) {
-			if (ioread32(ioaddr + CSR10) & 0x10000000)
-				break;
-		}
-		spin_unlock_irqrestore(&tp->mii_lock, flags);
-		return;
-	}
 		
 	/* Establish sync by sending 32 logic ones. */
 	for (i = 32; i >= 0; i--) {

drivers/net/tulip/timer.c

@@ -39,7 +39,6 @@ void tulip_timer(unsigned long data)
 	case MX98713:
 	case COMPEX9881:
 	case DM910X:
-	case ULI526X:
 	default: {
 		struct medialeaf *mleaf;
 		unsigned char *p;

drivers/net/tulip/tulip.h

@@ -88,7 +88,6 @@ enum chips {
 	I21145,
 	DM910X,
 	CONEXANT,
-	ULI526X
 };
 
 
@@ -482,11 +481,8 @@ static inline void tulip_stop_rxtx(struct tulip_private *tp)
 
 static inline void tulip_restart_rxtx(struct tulip_private *tp)
 {
-	if(!(tp->chip_id == ULI526X && 
-		(tp->revision == 0x40 || tp->revision == 0x50))) {
 	tulip_stop_rxtx(tp);
 	udelay(5);
-	}
 	tulip_start_rxtx(tp);
 }
 

drivers/net/tulip/tulip_core.c

@@ -199,9 +199,6 @@ struct tulip_chip_table tulip_tbl[] = {
   { "Conexant LANfinity", 256, 0x0001ebef,
 	HAS_MII | HAS_ACPI, tulip_timer },
 
-   /* ULi526X */
-   { "ULi M5261/M5263", 128, 0x0001ebef,
-        HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI, tulip_timer },
 };
 
 
@@ -239,8 +236,6 @@ static struct pci_device_id tulip_pci_tbl[] = {
 	{ 0x1737, 0xAB09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
 	{ 0x1737, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
 	{ 0x17B3, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
- 	{ 0x10b9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X },	/* ALi 1563 integrated ethernet */
- 	{ 0x10b9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X },	/* ALi 1563 integrated ethernet */
 	{ 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */
 	{ 0x14ea, 0xab08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Planex FNW-3602-TX */
 	{ } /* terminate list */
@@ -522,7 +517,7 @@ static void tulip_tx_timeout(struct net_device *dev)
 				   dev->name);
 	} else if (tp->chip_id == DC21140 || tp->chip_id == DC21142
 			   || tp->chip_id == MX98713 || tp->chip_id == COMPEX9881
-			   || tp->chip_id == DM910X || tp->chip_id == ULI526X) {
+			   || tp->chip_id == DM910X) {
 		printk(KERN_WARNING "%s: 21140 transmit timed out, status %8.8x, "
 			   "SIA %8.8x %8.8x %8.8x %8.8x, resetting...\n",
 			   dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12),
@@ -1103,9 +1098,7 @@ static void set_rx_mode(struct net_device *dev)
 			entry = tp->cur_tx++ % TX_RING_SIZE;
 
 			if (entry != 0) {
-				/* Avoid a chip errata by prefixing a dummy entry. Don't do
-				   this on the ULI526X as it triggers a different problem */
-				if (!(tp->chip_id == ULI526X && (tp->revision == 0x40 || tp->revision == 0x50))) {
+				/* Avoid a chip errata by prefixing a dummy entry. */
 				tp->tx_buffers[entry].skb = NULL;
 				tp->tx_buffers[entry].mapping = 0;
 				tp->tx_ring[entry].length =
@@ -1114,7 +1107,7 @@ static void set_rx_mode(struct net_device *dev)
 				/* Must set DescOwned later to avoid race with chip */
 				dummy = entry;
 				entry = tp->cur_tx++ % TX_RING_SIZE;
-				}
+
 			}
 
 			tp->tx_buffers[entry].skb = NULL;
@@ -1235,10 +1228,6 @@ static int tulip_uli_dm_quirk(struct pci_dev *pdev)
 {
 	if (pdev->vendor == 0x1282 && pdev->device == 0x9102)
 		return 1;
-	if (pdev->vendor == 0x10b9 && pdev->device == 0x5261)
-		return 1;
-	if (pdev->vendor == 0x10b9 && pdev->device == 0x5263)
-		return 1;
 	return 0;
 }
 
@@ -1680,7 +1669,6 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 	switch (chip_idx) {
 	case DC21140:
 	case DM910X:
-	case ULI526X:
 	default:
 		if (tp->mtable)
 			iowrite32(tp->mtable->csr12dir | 0x100, ioaddr + CSR12);