Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6

* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6:
  hwmon: fscher read control bugfix
  hwmon: (adm1031) Fix broken links in documentation
  hwmon: make abituguru3_read_increment_offset() static
  hwmon: Fix regression caused by typo in lm90.c
  hwmon: (applesmc) add temperature sensors set for Macbook
  hwmon: fscher control update bugfix
  hwmon: fix dme1737 temp fault attribute
  hwmon: Add missing __devexit tags in various drivers
  hwmon: clean up duplicate includes
  hwmon: fix lm78 detection regression
  hwmon: fix array overruns in lm93.c
  hwmon: add support for THMC50 and ADM1022

Documentation/hwmon/adm1031

@@ -6,13 +6,13 @@ Supported chips:
     Prefix: 'adm1030'
     Addresses scanned: I2C 0x2c to 0x2e
     Datasheet: Publicly available at the Analog Devices website
-               http://products.analog.com/products/info.asp?product=ADM1030
+               http://www.analog.com/en/prod/0%2C2877%2CADM1030%2C00.html
 
   * Analog Devices ADM1031
     Prefix: 'adm1031'
     Addresses scanned: I2C 0x2c to 0x2e
     Datasheet: Publicly available at the Analog Devices website
-               http://products.analog.com/products/info.asp?product=ADM1031
+               http://www.analog.com/en/prod/0%2C2877%2CADM1031%2C00.html
 
 Authors:
         Alexandre d'Alton <alex@alexdalton.org>

Documentation/hwmon/thmc50

+Kernel driver thmc50
+=====================
+
+Supported chips:
+  * Analog Devices ADM1022
+    Prefix: 'adm1022'
+    Addresses scanned: I2C 0x2c - 0x2e
+    Datasheet: http://www.analog.com/en/prod/0,2877,ADM1022,00.html
+  * Texas Instruments THMC50
+    Prefix: 'thmc50'
+    Addresses scanned: I2C 0x2c - 0x2e
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/thmc50.html
+
+Author: Krzysztof Helt <krzysztof.h1@wp.pl>
+
+This driver was derived from the 2.4 kernel thmc50.c source file.
+
+Credits:
+  thmc50.c (2.4 kernel):
+	Frodo Looijaard <frodol@dds.nl>
+	Philip Edelbrock <phil@netroedge.com>
+
+Module Parameters
+-----------------
+
+* adm1022_temp3: short array
+  List of adapter,address pairs to force chips into ADM1022 mode with
+  second remote temperature. This does not work for original THMC50 chips.
+
+Description
+-----------
+
+The THMC50 implements: an internal temperature sensor, support for an
+external diode-type temperature sensor (compatible w/ the diode sensor inside
+many processors), and a controllable fan/analog_out DAC. For the temperature
+sensors, limits can be set through the appropriate Overtemperature Shutdown
+register and Hysteresis register. Each value can be set and read to half-degree
+accuracy.  An alarm is issued (usually to a connected LM78) when the
+temperature gets higher then the Overtemperature Shutdown value; it stays on
+until the temperature falls below the Hysteresis value. All temperatures are in
+degrees Celsius, and are guaranteed within a range of -55 to +125 degrees.
+
+The THMC50 only updates its values each 1.5 seconds; reading it more often
+will do no harm, but will return 'old' values.
+
+The THMC50 is usually used in combination with LM78-like chips, to measure
+the temperature of the processor(s).
+
+The ADM1022 works the same as THMC50 but it is faster (5 Hz instead of
+1 Hz for THMC50). It can be also put in a new mode to handle additional
+remote temperature sensor. The driver use the mode set by BIOS by default.
+
+In case the BIOS is broken and the mode is set incorrectly, you can force
+the mode with additional remote temperature with adm1022_temp3 parameter.
+A typical symptom of wrong setting is a fan forced to full speed.
+
+Driver Features
+---------------
+
+The driver provides up to three temperatures:
+
+temp1		-- internal
+temp2		-- remote
+temp3		-- 2nd remote only for ADM1022
+
+pwm1		-- fan speed (0 = stop, 255 = full)
+pwm1_mode	-- always 0 (DC mode)
+
+The value of 0 for pwm1 also forces FAN_OFF signal from the chip,
+so it stops fans even if the value 0 into the ANALOG_OUT register does not.
+
+The driver was tested on Compaq AP550 with two ADM1022 chips (one works
+in the temp3 mode), five temperature readings and two fans.
+

drivers/hwmon/Kconfig

@@ -520,6 +520,16 @@ config SENSORS_SMSC47B397
 	  This driver can also be built as a module.  If so, the module
 	  will be called smsc47b397.
 
+config SENSORS_THMC50
+	tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for Texas Instruments THMC50
+	  sensor chips and clones: the Analog Devices ADM1022.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called thmc50.
+
 config SENSORS_VIA686A
 	tristate "VIA686A"
 	depends on PCI

drivers/hwmon/Makefile

@@ -56,6 +56,7 @@ obj-$(CONFIG_SENSORS_SIS5595)	+= sis5595.o
 obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
 obj-$(CONFIG_SENSORS_SMSC47M1)	+= smsc47m1.o
 obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
+obj-$(CONFIG_SENSORS_THMC50)	+= thmc50.o
 obj-$(CONFIG_SENSORS_VIA686A)	+= via686a.o
 obj-$(CONFIG_SENSORS_VT1211)	+= vt1211.o
 obj-$(CONFIG_SENSORS_VT8231)	+= vt8231.o

drivers/hwmon/abituguru3.c

@@ -691,8 +691,9 @@ static int abituguru3_read(struct abituguru3_data *data, u8 bank, u8 offset,
 
 /* Sensor settings are stored 1 byte per offset with the bytes
    placed add consecutive offsets. */
-int abituguru3_read_increment_offset(struct abituguru3_data *data, u8 bank,
-	u8 offset, u8 count, u8 *buf, int offset_count)
+static int abituguru3_read_increment_offset(struct abituguru3_data *data,
+					    u8 bank, u8 offset, u8 count,
+					    u8 *buf, int offset_count)
 {
 	int i, x;
 

drivers/hwmon/ams/ams-core.c

@@ -23,7 +23,6 @@
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/init.h>
-#include <linux/module.h>
 #include <asm/pmac_pfunc.h>
 #include <asm/of_platform.h>
 

drivers/hwmon/applesmc.c

@@ -79,11 +79,15 @@
 
 /*
  * Temperature sensors keys (sp78 - 2 bytes).
- * First set for Macbook(Pro), second for Macmini.
  */
 static const char* temperature_sensors_sets[][13] = {
+/* Set 0: Macbook Pro */
 	{ "TA0P", "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "Th0H",
 	  "Th1H", "Tm0P", "Ts0P", "Ts1P", NULL },
+/* Set 1: Macbook set */
+	{ "TB0T", "TC0D", "TC0P", "TM0P", "TN0P", "TN1P", "Th0H", "Th0S",
+	  "Th1H", "Ts0P", NULL },
+/* Set 2: Macmini set */
 	{ "TC0D", "TC0P", NULL }
 };
 
@@ -1150,10 +1154,10 @@ static void applesmc_release_accelerometer(void)
 static __initdata struct dmi_match_data applesmc_dmi_data[] = {
 /* MacBook Pro: accelerometer, backlight and temperature set 0 */
 	{ .accelerometer = 1, .light = 1, .temperature_set = 0 },
-/* MacBook: accelerometer and temperature set 0 */
-	{ .accelerometer = 1, .light = 0, .temperature_set = 0 },
-/* MacBook: temperature set 1 */
-	{ .accelerometer = 0, .light = 0, .temperature_set = 1 }
+/* MacBook: accelerometer and temperature set 1 */
+	{ .accelerometer = 1, .light = 0, .temperature_set = 1 },
+/* MacMini: temperature set 2 */
+	{ .accelerometer = 0, .light = 0, .temperature_set = 2 },
 };
 
 /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".

drivers/hwmon/dme1737.c

@@ -750,7 +750,7 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
 		res = (data->alarms >> DME1737_BIT_ALARM_TEMP[ix]) & 0x01;
 		break;
 	case SYS_TEMP_FAULT:
-		res = (data->temp[ix] == 0x0800);
+		res = (((u16)data->temp[ix] & 0xff00) == 0x8000);
 		break;
 	default:
 		res = 0;

drivers/hwmon/fscher.c

@@ -441,6 +441,8 @@ static struct fscher_data *fscher_update_device(struct device *dev)
 		data->watchdog[2] = fscher_read_value(client, FSCHER_REG_WDOG_CONTROL);
 
 		data->global_event = fscher_read_value(client, FSCHER_REG_EVENT_STATE);
+		data->global_control = fscher_read_value(client,
+							FSCHER_REG_CONTROL);
 
 		data->last_updated = jiffies;
 		data->valid = 1;                 
@@ -599,7 +601,7 @@ static ssize_t set_control(struct i2c_client *client, struct fscher_data *data,
 	unsigned long v = simple_strtoul(buf, NULL, 10) & 0x01;
 
 	mutex_lock(&data->update_lock);
-	data->global_control &= ~v;
+	data->global_control = v;
 	fscher_write_value(client, reg, v);
 	mutex_unlock(&data->update_lock);
 	return count;

drivers/hwmon/it87.c

@@ -252,7 +252,7 @@ struct it87_data {
 
 
 static int it87_probe(struct platform_device *pdev);
-static int it87_remove(struct platform_device *pdev);
+static int __devexit it87_remove(struct platform_device *pdev);
 
 static int it87_read_value(struct it87_data *data, u8 reg);
 static void it87_write_value(struct it87_data *data, u8 reg, u8 value);

drivers/hwmon/lm78.c

@@ -864,7 +864,7 @@ static int __init lm78_isa_found(unsigned short address)
 	/* Determine the chip type */
 	outb_p(LM78_REG_CHIPID, address + LM78_ADDR_REG_OFFSET);
 	val = inb_p(address + LM78_DATA_REG_OFFSET);
-	if (val == 0x00			/* LM78 */
+	if (val == 0x00 || val == 0x20	/* LM78 */
 	 || val == 0x40			/* LM78-J */
 	 || (val & 0xfe) == 0xc0)	/* LM79 */
 		found = 1;

drivers/hwmon/lm90.c

@@ -585,7 +585,7 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind)
 			 * those of the man_id register.
 			 */
 			if (chip_id == man_id
-			 && (address == 0x4F || address == 0x4D)
+			 && (address == 0x4C || address == 0x4D)
 			 && (reg_config1 & 0x1F) == (man_id & 0x0F)
 			 && reg_convrate <= 0x09) {
 			 	kind = max6657;

drivers/hwmon/lm93.c

@@ -234,7 +234,7 @@ struct lm93_data {
 	struct {
 		u8 min;
 		u8 max;
-	} temp_lim[3];
+	} temp_lim[4];
 
 	/* vin1 - vin16: low and high limits */
 	struct {

drivers/hwmon/pc87360.c

@@ -220,7 +220,7 @@ struct pc87360_data {
  */
 
 static int pc87360_probe(struct platform_device *pdev);
-static int pc87360_remove(struct platform_device *pdev);
+static int __devexit pc87360_remove(struct platform_device *pdev);
 
 static int pc87360_read_value(struct pc87360_data *data, u8 ldi, u8 bank,
 			      u8 reg);

drivers/hwmon/sis5595.c

@@ -187,7 +187,7 @@ struct sis5595_data {
 static struct pci_dev *s_bridge;	/* pointer to the (only) sis5595 */
 
 static int sis5595_probe(struct platform_device *pdev);
-static int sis5595_remove(struct platform_device *pdev);
+static int __devexit sis5595_remove(struct platform_device *pdev);
 
 static int sis5595_read_value(struct sis5595_data *data, u8 reg);
 static void sis5595_write_value(struct sis5595_data *data, u8 reg, u8 value);

drivers/hwmon/smsc47m1.c

@@ -134,7 +134,7 @@ struct smsc47m1_sio_data {
 
 
 static int smsc47m1_probe(struct platform_device *pdev);
-static int smsc47m1_remove(struct platform_device *pdev);
+static int __devexit smsc47m1_remove(struct platform_device *pdev);
 static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
 		int init);
 

drivers/hwmon/via686a.c

@@ -314,7 +314,7 @@ struct via686a_data {
 static struct pci_dev *s_bridge;	/* pointer to the (only) via686a */
 
 static int via686a_probe(struct platform_device *pdev);
-static int via686a_remove(struct platform_device *pdev);
+static int __devexit via686a_remove(struct platform_device *pdev);
 
 static inline int via686a_read_value(struct via686a_data *data, u8 reg)
 {

drivers/hwmon/vt8231.c

@@ -167,7 +167,7 @@ struct vt8231_data {
 
 static struct pci_dev *s_bridge;
 static int vt8231_probe(struct platform_device *pdev);
-static int vt8231_remove(struct platform_device *pdev);
+static int __devexit vt8231_remove(struct platform_device *pdev);
 static struct vt8231_data *vt8231_update_device(struct device *dev);
 static void vt8231_init_device(struct vt8231_data *data);
 
@@ -751,7 +751,7 @@ exit_release:
 	return err;
 }
 
-static int vt8231_remove(struct platform_device *pdev)
+static int __devexit vt8231_remove(struct platform_device *pdev)
 {
 	struct vt8231_data *data = platform_get_drvdata(pdev);
 	int i;

drivers/hwmon/w83627hf.c

@@ -387,7 +387,7 @@ struct w83627hf_sio_data {
 
 
 static int w83627hf_probe(struct platform_device *pdev);
-static int w83627hf_remove(struct platform_device *pdev);
+static int __devexit w83627hf_remove(struct platform_device *pdev);
 
 static int w83627hf_read_value(struct w83627hf_data *data, u16 reg);
 static int w83627hf_write_value(struct w83627hf_data *data, u16 reg, u16 value);