Merge master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6

drivers/ide/legacy/ide-cs.c

@@ -477,7 +477,7 @@ static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
 	PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2      ", 0xe37be2b5, 0x8671043b),
-	PCMCIA_DEVICE_PROD_ID12(" ", "NinjaATA-", 0x3b6e20c8, 0xebe0bd79),
+	PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
 	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
 	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
 	PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),

drivers/pcmcia/Kconfig

@@ -146,7 +146,7 @@ config I82365
 
 config TCIC
 	tristate "Databook TCIC host bridge support"
-	depends on PCMCIA
+	depends on PCMCIA && ISA
 	select PCCARD_NONSTATIC
 	help
 	  Say Y here to include support for the Databook TCIC family of PCMCIA

drivers/pcmcia/cardbus.c

@@ -228,6 +228,11 @@ int cb_alloc(struct pcmcia_socket * s)
 	pci_bus_size_bridges(bus);
 	pci_bus_assign_resources(bus);
 	cardbus_assign_irqs(bus, s->pci_irq);
+
+	/* socket specific tune function */
+	if (s->tune_bridge)
+		s->tune_bridge(s, bus);
+
 	pci_enable_bridges(bus);
 	pci_bus_add_devices(bus);
 

drivers/pcmcia/ti113x.h

@@ -59,6 +59,7 @@
 
 #define  TI122X_SCR_SER_STEP		0xc0000000
 #define  TI122X_SCR_INTRTIE		0x20000000
+#define  TIXX21_SCR_TIEALL		0x10000000
 #define  TI122X_SCR_CBRSVD		0x00400000
 #define  TI122X_SCR_MRBURSTDN		0x00008000
 #define  TI122X_SCR_MRBURSTUP		0x00004000
@@ -153,6 +154,12 @@
 /* EnE test register */
 #define ENE_TEST_C9			0xc9	/* 8bit */
 #define ENE_TEST_C9_TLTENABLE		0x02
+#define ENE_TEST_C9_PFENABLE_F0		0x04
+#define ENE_TEST_C9_PFENABLE_F1		0x08
+#define ENE_TEST_C9_PFENABLE		(ENE_TEST_C9_PFENABLE_F0 | ENE_TEST_C9_PFENABLE_F0)
+#define ENE_TEST_C9_WPDISALBLE_F0	0x40
+#define ENE_TEST_C9_WPDISALBLE_F1	0x80
+#define ENE_TEST_C9_WPDISALBLE		(ENE_TEST_C9_WPDISALBLE_F0 | ENE_TEST_C9_WPDISALBLE_F1)
 
 /*
  * Texas Instruments CardBus controller overrides.
@@ -618,6 +625,7 @@ static int ti12xx_2nd_slot_empty(struct yenta_socket *socket)
 	int devfn;
 	unsigned int state;
 	int ret = 1;
+	u32 sysctl;
 
 	/* catch the two-slot controllers */
 	switch (socket->dev->device) {
@@ -640,6 +648,24 @@ static int ti12xx_2nd_slot_empty(struct yenta_socket *socket)
 		 */
 		break;
 
+	case PCI_DEVICE_ID_TI_X515:
+	case PCI_DEVICE_ID_TI_X420:
+	case PCI_DEVICE_ID_TI_X620:
+	case PCI_DEVICE_ID_TI_XX21_XX11:
+	case PCI_DEVICE_ID_TI_7410:
+	case PCI_DEVICE_ID_TI_7610:
+		/*
+		 * those are either single or dual slot CB with additional functions
+		 * like 1394, smartcard reader, etc. check the TIEALL flag for them
+		 * the TIEALL flag binds the IRQ of all functions toghether.
+		 * we catch the single slot variants later.
+		 */
+		sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
+		if (sysctl & TIXX21_SCR_TIEALL)
+			return 0;
+
+		break;
+
 	/* single-slot controllers have the 2nd slot empty always :) */
 	default:
 		return 1;
@@ -652,6 +678,15 @@ static int ti12xx_2nd_slot_empty(struct yenta_socket *socket)
 	if (!func)
 		return 1;
 
+	/*
+	 * check that the device id of both slots match. this is needed for the
+	 * XX21 and the XX11 controller that share the same device id for single
+	 * and dual slot controllers. return '2nd slot empty'. we already checked
+	 * if the interrupt is tied to another function.
+	 */
+	if (socket->dev->device != func->device)
+		goto out;
+
 	slot2 = pci_get_drvdata(func);
 	if (!slot2)
 		goto out;
@@ -790,16 +825,6 @@ static int ti12xx_override(struct yenta_socket *socket)
 	if (val_orig != val)
 		config_writel(socket, TI113X_SYSTEM_CONTROL, val);
 
-	/*
-	 * for EnE bridges only: clear testbit TLTEnable. this makes the
-	 * RME Hammerfall DSP sound card working.
-	 */
-	if (socket->dev->vendor == PCI_VENDOR_ID_ENE) {
-		u8 test_c9 = config_readb(socket, ENE_TEST_C9);
-		test_c9 &= ~ENE_TEST_C9_TLTENABLE;
-		config_writeb(socket, ENE_TEST_C9, test_c9);
-	}
-
 	/*
 	 * Yenta expects controllers to use CSCINT to route
 	 * CSC interrupts to PCI rather than INTVAL.
@@ -841,5 +866,75 @@ static int ti1250_override(struct yenta_socket *socket)
 	return ti12xx_override(socket);
 }
 
+
+/**
+ * EnE specific part. EnE bridges are register compatible with TI bridges but
+ * have their own test registers and more important their own little problems.
+ * Some fixup code to make everybody happy (TM).
+ */
+
+/**
+ * set/clear various test bits:
+ * Defaults to clear the bit.
+ * - mask (u8) defines what bits to change
+ * - bits (u8) is the values to change them to
+ * -> it's
+ * 	current = (current & ~mask) | bits
+ */
+/* pci ids of devices that wants to have the bit set */
+#define DEVID(_vend,_dev,_subvend,_subdev,mask,bits) {		\
+		.vendor		= _vend,			\
+		.device		= _dev,				\
+		.subvendor	= _subvend,			\
+		.subdevice	= _subdev,			\
+		.driver_data	= ((mask) << 8 | (bits)),	\
+	}
+static struct pci_device_id ene_tune_tbl[] = {
+	/* Echo Audio products based on motorola DSP56301 and DSP56361 */
+	DEVID(PCI_VENDOR_ID_MOTOROLA, 0x1801, 0xECC0, PCI_ANY_ID,
+		ENE_TEST_C9_TLTENABLE | ENE_TEST_C9_PFENABLE, ENE_TEST_C9_TLTENABLE),
+	DEVID(PCI_VENDOR_ID_MOTOROLA, 0x3410, 0xECC0, PCI_ANY_ID,
+		ENE_TEST_C9_TLTENABLE | ENE_TEST_C9_PFENABLE, ENE_TEST_C9_TLTENABLE),
+
+	{}
+};
+
+static void ene_tune_bridge(struct pcmcia_socket *sock, struct pci_bus *bus)
+{
+	struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
+	struct pci_dev *dev;
+	struct pci_device_id *id = NULL;
+	u8 test_c9, old_c9, mask, bits;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		id = (struct pci_device_id *) pci_match_id(ene_tune_tbl, dev);
+		if (id)
+			break;
+	}
+
+	test_c9 = old_c9 = config_readb(socket, ENE_TEST_C9);
+	if (id) {
+		mask = (id->driver_data >> 8) & 0xFF;
+		bits = id->driver_data & 0xFF;
+
+		test_c9 = (test_c9 & ~mask) | bits;
+	}
+	else
+		/* default to clear TLTEnable bit, old behaviour */
+		test_c9 &= ~ENE_TEST_C9_TLTENABLE;
+
+	printk(KERN_INFO "yenta EnE: chaning testregister 0xC9, %02x -> %02x\n", old_c9, test_c9);
+	config_writeb(socket, ENE_TEST_C9, test_c9);
+}
+
+
+static int ene_override(struct yenta_socket *socket)
+{
+	/* install tune_bridge() function */
+	socket->socket.tune_bridge = ene_tune_bridge;
+
+	return ti1250_override(socket);
+}
+
 #endif /* _LINUX_TI113X_H */
 

drivers/pcmcia/yenta_socket.c

@@ -559,12 +559,6 @@ static void yenta_interrogate(struct yenta_socket *socket)
 static int yenta_sock_init(struct pcmcia_socket *sock)
 {
 	struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
-	u16 bridge;
-
-	bridge = config_readw(socket, CB_BRIDGE_CONTROL) & ~CB_BRIDGE_INTR;
-	if (!socket->cb_irq)
-		bridge |= CB_BRIDGE_INTR;
-	config_writew(socket, CB_BRIDGE_CONTROL, bridge);
 
 	exca_writeb(socket, I365_GBLCTL, 0x00);
 	exca_writeb(socket, I365_GENCTL, 0x00);
@@ -819,6 +813,7 @@ enum {
 	CARDBUS_TYPE_TOPIC95,
 	CARDBUS_TYPE_TOPIC97,
 	CARDBUS_TYPE_O2MICRO,
+	CARDBUS_TYPE_ENE,
 };
 
 /*
@@ -865,6 +860,12 @@ static struct cardbus_type cardbus_type[] = {
 		.override	= o2micro_override,
 		.restore_state	= o2micro_restore_state,
 	},
+	[CARDBUS_TYPE_ENE]	= {
+		.override	= ene_override,
+		.save_state	= ti_save_state,
+		.restore_state	= ti_restore_state,
+		.sock_init	= ti_init,
+	},
 };
 
 
@@ -883,16 +884,8 @@ static unsigned int yenta_probe_irq(struct yenta_socket *socket, u32 isa_irq_mas
 {
 	int i;
 	unsigned long val;
-	u16 bridge_ctrl;
 	u32 mask;
 
-	/* Set up ISA irq routing to probe the ISA irqs.. */
-	bridge_ctrl = config_readw(socket, CB_BRIDGE_CONTROL);
-	if (!(bridge_ctrl & CB_BRIDGE_INTR)) {
-		bridge_ctrl |= CB_BRIDGE_INTR;
-		config_writew(socket, CB_BRIDGE_CONTROL, bridge_ctrl);
-	}
-
 	/*
 	 * Probe for usable interrupts using the force
 	 * register to generate bogus card status events.
@@ -914,9 +907,6 @@ static unsigned int yenta_probe_irq(struct yenta_socket *socket, u32 isa_irq_mas
 
 	mask = probe_irq_mask(val) & 0xffff;
 
-	bridge_ctrl &= ~CB_BRIDGE_INTR;
-	config_writew(socket, CB_BRIDGE_CONTROL, bridge_ctrl);
-
 	return mask;
 }
 
@@ -944,18 +934,11 @@ static irqreturn_t yenta_probe_handler(int irq, void *dev_id, struct pt_regs *re
 /* probes the PCI interrupt, use only on override functions */
 static int yenta_probe_cb_irq(struct yenta_socket *socket)
 {
-	u16 bridge_ctrl;
-
 	if (!socket->cb_irq)
 		return -1;
 
 	socket->probe_status = 0;
 
-	/* disable ISA interrupts */
-	bridge_ctrl = config_readw(socket, CB_BRIDGE_CONTROL);
-	bridge_ctrl &= ~CB_BRIDGE_INTR;
-	config_writew(socket, CB_BRIDGE_CONTROL, bridge_ctrl);
-
 	if (request_irq(socket->cb_irq, yenta_probe_handler, SA_SHIRQ, "yenta", socket)) {
 		printk(KERN_WARNING "Yenta: request_irq() in yenta_probe_cb_irq() failed!\n");
 		return -1;
@@ -1004,11 +987,12 @@ static void yenta_config_init(struct yenta_socket *socket)
 {
 	u16 bridge;
 	struct pci_dev *dev = socket->dev;
+	struct pci_bus_region region;
 
-	pci_set_power_state(socket->dev, 0);
+	pcibios_resource_to_bus(socket->dev, &region, &dev->resource[0]);
 
 	config_writel(socket, CB_LEGACY_MODE_BASE, 0);
-	config_writel(socket, PCI_BASE_ADDRESS_0, dev->resource[0].start);
+	config_writel(socket, PCI_BASE_ADDRESS_0, region.start);
 	config_writew(socket, PCI_COMMAND,
 			PCI_COMMAND_IO |
 			PCI_COMMAND_MEMORY |
@@ -1031,8 +1015,8 @@ static void yenta_config_init(struct yenta_socket *socket)
 	 *  - PCI interrupts enabled if a PCI interrupt exists..
 	 */
 	bridge = config_readw(socket, CB_BRIDGE_CONTROL);
-	bridge &= ~(CB_BRIDGE_CRST | CB_BRIDGE_PREFETCH1 | CB_BRIDGE_INTR | CB_BRIDGE_ISAEN | CB_BRIDGE_VGAEN);
-	bridge |= CB_BRIDGE_PREFETCH0 | CB_BRIDGE_POSTEN | CB_BRIDGE_INTR;
+	bridge &= ~(CB_BRIDGE_CRST | CB_BRIDGE_PREFETCH1 | CB_BRIDGE_ISAEN | CB_BRIDGE_VGAEN);
+	bridge |= CB_BRIDGE_PREFETCH0 | CB_BRIDGE_POSTEN;
 	config_writew(socket, CB_BRIDGE_CONTROL, bridge);
 }
 
@@ -1265,10 +1249,22 @@ static struct pci_device_id yenta_table [] = {
 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1250, TI1250),
 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1410, TI1250),
 
-	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1211, TI12XX),
-	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1225, TI12XX),
-	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1410, TI1250),
-	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1420, TI12XX),
+	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XX21_XX11, TI12XX),
+	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X515, TI12XX),
+	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X420, TI12XX),
+	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X620, TI12XX),
+	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7410, TI12XX),
+	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7510, TI12XX),
+	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7610, TI12XX),
+
+	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_710, TI12XX),
+	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_712, TI12XX),
+	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_720, TI12XX),
+	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_722, TI12XX),
+	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1211, ENE),
+	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1225, ENE),
+	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1410, ENE),
+	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1420, ENE),
 
 	CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C465, RICOH),
 	CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C466, RICOH),

drivers/serial/serial_cs.c

@@ -859,6 +859,7 @@ static struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "DP83903.cis"),
 	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "3CXEM556.cis"),
 	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "3CXEM556.cis"),
+	PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"),	/* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
 	PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "MT5634ZLX.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "COMpad4.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "COMpad2.cis"),

include/linux/mod_devicetable.h

@@ -209,10 +209,11 @@ struct pcmcia_device_id {
 	/* for real multi-function devices */
 	__u8  		function;
 
-	/* for pseude multi-function devices */
+	/* for pseudo multi-function devices */
 	__u8  		device_no;
 
-	__u32 		prod_id_hash[4];
+	__u32 		prod_id_hash[4]
+		__attribute__((aligned(sizeof(__u32))));
 
 	/* not matched against in kernelspace*/
 #ifdef __KERNEL__

include/linux/pci_ids.h

@@ -769,6 +769,8 @@
 #define PCI_DEVICE_ID_TI_TVP4010	0x3d04
 #define PCI_DEVICE_ID_TI_TVP4020	0x3d07
 #define PCI_DEVICE_ID_TI_4450		0x8011
+#define PCI_DEVICE_ID_TI_XX21_XX11	0x8031
+#define PCI_DEVICE_ID_TI_X515		0x8036
 #define PCI_DEVICE_ID_TI_1130		0xac12
 #define PCI_DEVICE_ID_TI_1031		0xac13
 #define PCI_DEVICE_ID_TI_1131		0xac15
@@ -785,12 +787,17 @@
 #define PCI_DEVICE_ID_TI_4451		0xac42
 #define PCI_DEVICE_ID_TI_4510		0xac44
 #define PCI_DEVICE_ID_TI_4520		0xac46
+#define PCI_DEVICE_ID_TI_7510		0xac47
+#define PCI_DEVICE_ID_TI_7610		0xac48
+#define PCI_DEVICE_ID_TI_7410		0xac49
 #define PCI_DEVICE_ID_TI_1410		0xac50
 #define PCI_DEVICE_ID_TI_1420		0xac51
 #define PCI_DEVICE_ID_TI_1451A		0xac52
 #define PCI_DEVICE_ID_TI_1620		0xac54
 #define PCI_DEVICE_ID_TI_1520		0xac55
 #define PCI_DEVICE_ID_TI_1510		0xac56
+#define PCI_DEVICE_ID_TI_X620		0xac8d
+#define PCI_DEVICE_ID_TI_X420		0xac8e
 
 #define PCI_VENDOR_ID_SONY		0x104d
 #define PCI_DEVICE_ID_SONY_CXD3222	0x8039
@@ -2187,7 +2194,12 @@
 #define PCI_DEVICE_ID_ENE_1211		0x1211
 #define PCI_DEVICE_ID_ENE_1225		0x1225
 #define PCI_DEVICE_ID_ENE_1410		0x1410
+#define PCI_DEVICE_ID_ENE_710		0x1411
+#define PCI_DEVICE_ID_ENE_712		0x1412
 #define PCI_DEVICE_ID_ENE_1420		0x1420
+#define PCI_DEVICE_ID_ENE_720		0x1421
+#define PCI_DEVICE_ID_ENE_722		0x1422
+
 #define PCI_VENDOR_ID_CHELSIO		0x1425
 
 #define PCI_VENDOR_ID_MIPS		0x153f

include/pcmcia/ss.h

@@ -21,6 +21,9 @@
 #include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/bulkmem.h>
+#ifdef CONFIG_CARDBUS
+#include <linux/pci.h>
+#endif
 
 /* Definitions for card status flags for GetStatus */
 #define SS_WRPROT	0x0001
@@ -233,6 +236,10 @@ struct pcmcia_socket {
 
 	/* so is power hook */
 	int (*power_hook)(struct pcmcia_socket *sock, int operation);
+#ifdef CONFIG_CARDBUS
+	/* allows tuning the CB bridge before loading driver for the CB card */
+	void (*tune_bridge)(struct pcmcia_socket *sock, struct pci_bus *bus);
+#endif
 
 	/* state thread */
 	struct semaphore		skt_sem;	/* protects socket h/w state */

scripts/mod/file2alias.c

@@ -295,11 +295,13 @@ static int do_pcmcia_entry(const char *filename,
 {
 	unsigned int i;
 
+	id->match_flags = TO_NATIVE(id->match_flags);
 	id->manf_id = TO_NATIVE(id->manf_id);
 	id->card_id = TO_NATIVE(id->card_id);
 	id->func_id = TO_NATIVE(id->func_id);
 	id->function = TO_NATIVE(id->function);
 	id->device_no = TO_NATIVE(id->device_no);
+
 	for (i=0; i<4; i++) {
 		id->prod_id_hash[i] = TO_NATIVE(id->prod_id_hash[i]);
        }