Skip to content

L
linux-davinci-2.6.23
Commit bd36b0ac authored by Ron Mercer's avatar Ron Mercer Committed by Jeff Garzik
Browse files
Options

qla3xxx: Add support for Qlogic 4032 chip. 

Qlogic 4032 chip is an incremental change from the 4022.
Signed-off-by: default avatarRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent 83d98b40
Hide whitespace changes
Inline Side-by-side
Showing with 379 additions and 72 deletions
drivers/net/qla3xxx.c 100644 → 100755
View file @ bd36b0ac
......@@ -22,6 +22,7 @@
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/ip.h>
#include <linux/in.h>
#include <linux/if_arp.h>
#include <linux/if_ether.h>
#include <linux/netdevice.h>
......@@ -63,6 +64,7 @@ MODULE_PARM_DESC(msi, "Turn on Message Signaled Interrupts.");
static struct pci_device_id ql3xxx_pci_tbl[] __devinitdata = {
{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QL3022_DEVICE_ID)},
{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QL3032_DEVICE_ID)},
/* required last entry */
{0,}
};
......@@ -1475,6 +1477,10 @@ static int ql_mii_setup(struct ql3_adapter *qdev)
2) << 7))
return -1;
if (qdev->device_id == QL3032_DEVICE_ID)
ql_write_page0_reg(qdev,
&port_regs->macMIIMgmtControlReg, 0x0f00000);
/* Divide 125MHz clock by 28 to meet PHY timing requirements */
reg = MAC_MII_CONTROL_CLK_SEL_DIV28;
......@@ -1706,18 +1712,42 @@ static void ql_process_mac_tx_intr(struct ql3_adapter *qdev,
struct ob_mac_iocb_rsp *mac_rsp)
{
struct ql_tx_buf_cb *tx_cb;
int i;
tx_cb = &qdev->tx_buf[mac_rsp->transaction_id];
pci_unmap_single(qdev->pdev,
pci_unmap_addr(tx_cb, mapaddr),
pci_unmap_len(tx_cb, maplen), PCI_DMA_TODEVICE);
dev_kfree_skb_irq(tx_cb->skb);
pci_unmap_addr(&tx_cb->map[0], mapaddr),
pci_unmap_len(&tx_cb->map[0], maplen),
PCI_DMA_TODEVICE);
tx_cb->seg_count--;
if (tx_cb->seg_count) {
for (i = 1; i < tx_cb->seg_count; i++) {
pci_unmap_page(qdev->pdev,
pci_unmap_addr(&tx_cb->map[i],
mapaddr),
pci_unmap_len(&tx_cb->map[i], maplen),
PCI_DMA_TODEVICE);
}
}
qdev->stats.tx_packets++;
qdev->stats.tx_bytes += tx_cb->skb->len;
dev_kfree_skb_irq(tx_cb->skb);
tx_cb->skb = NULL;
atomic_inc(&qdev->tx_count);
}
/*
* The difference between 3022 and 3032 for inbound completions:
* 3022 uses two buffers per completion. The first buffer contains
* (some) header info, the second the remainder of the headers plus
* the data. For this chip we reserve some space at the top of the
* receive buffer so that the header info in buffer one can be
* prepended to the buffer two. Buffer two is the sent up while
* buffer one is returned to the hardware to be reused.
* 3032 receives all of it's data and headers in one buffer for a
* simpler process. 3032 also supports checksum verification as
* can be seen in ql_process_macip_rx_intr().
*/
static void ql_process_mac_rx_intr(struct ql3_adapter *qdev,
struct ib_mac_iocb_rsp *ib_mac_rsp_ptr)
{
......@@ -1740,14 +1770,17 @@ static void ql_process_mac_rx_intr(struct ql3_adapter *qdev,
qdev->last_rsp_offset = qdev->small_buf_phy_addr_low + offset;
qdev->small_buf_release_cnt++;
/* start of first buffer */
lrg_buf_phy_addr_low = le32_to_cpu(*curr_ial_ptr);
lrg_buf_cb1 = &qdev->lrg_buf[qdev->lrg_buf_index];
qdev->lrg_buf_release_cnt++;
if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS)
qdev->lrg_buf_index = 0;
curr_ial_ptr++; /* 64-bit pointers require two incs. */
curr_ial_ptr++;
if (qdev->device_id == QL3022_DEVICE_ID) {
/* start of first buffer (3022 only) */
lrg_buf_phy_addr_low = le32_to_cpu(*curr_ial_ptr);
lrg_buf_cb1 = &qdev->lrg_buf[qdev->lrg_buf_index];
qdev->lrg_buf_release_cnt++;
if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS) {
qdev->lrg_buf_index = 0;
}
curr_ial_ptr++; /* 64-bit pointers require two incs. */
curr_ial_ptr++;
}
/* start of second buffer */
lrg_buf_phy_addr_low = le32_to_cpu(*curr_ial_ptr);
......@@ -1778,7 +1811,8 @@ static void ql_process_mac_rx_intr(struct ql3_adapter *qdev,
qdev->ndev->last_rx = jiffies;
lrg_buf_cb2->skb = NULL;
ql_release_to_lrg_buf_free_list(qdev, lrg_buf_cb1);
if (qdev->device_id == QL3022_DEVICE_ID)
ql_release_to_lrg_buf_free_list(qdev, lrg_buf_cb1);
ql_release_to_lrg_buf_free_list(qdev, lrg_buf_cb2);
}
......@@ -1790,7 +1824,7 @@ static void ql_process_macip_rx_intr(struct ql3_adapter *qdev,
struct ql_rcv_buf_cb *lrg_buf_cb1 = NULL;
struct ql_rcv_buf_cb *lrg_buf_cb2 = NULL;
u32 *curr_ial_ptr;
struct sk_buff *skb1, *skb2;
struct sk_buff *skb1 = NULL, *skb2;
struct net_device *ndev = qdev->ndev;
u16 length = le16_to_cpu(ib_ip_rsp_ptr->length);
u16 size = 0;
......@@ -1806,16 +1840,20 @@ static void ql_process_macip_rx_intr(struct ql3_adapter *qdev,
qdev->last_rsp_offset = qdev->small_buf_phy_addr_low + offset;
qdev->small_buf_release_cnt++;
/* start of first buffer */
lrg_buf_phy_addr_low = le32_to_cpu(*curr_ial_ptr);
lrg_buf_cb1 = &qdev->lrg_buf[qdev->lrg_buf_index];
qdev->lrg_buf_release_cnt++;
if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS)
qdev->lrg_buf_index = 0;
skb1 = lrg_buf_cb1->skb;
curr_ial_ptr++; /* 64-bit pointers require two incs. */
curr_ial_ptr++;
if (qdev->device_id == QL3022_DEVICE_ID) {
/* start of first buffer on 3022 */
lrg_buf_phy_addr_low = le32_to_cpu(*curr_ial_ptr);
lrg_buf_cb1 = &qdev->lrg_buf[qdev->lrg_buf_index];
qdev->lrg_buf_release_cnt++;
if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS)
qdev->lrg_buf_index = 0;
skb1 = lrg_buf_cb1->skb;
curr_ial_ptr++; /* 64-bit pointers require two incs. */
curr_ial_ptr++;
size = ETH_HLEN;
if (*((u16 *) skb1->data) != 0xFFFF)
size += VLAN_ETH_HLEN - ETH_HLEN;
}
/* start of second buffer */
lrg_buf_phy_addr_low = le32_to_cpu(*curr_ial_ptr);
......@@ -1825,18 +1863,6 @@ static void ql_process_macip_rx_intr(struct ql3_adapter *qdev,
if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS)
qdev->lrg_buf_index = 0;
qdev->stats.rx_packets++;
qdev->stats.rx_bytes += length;
/*
* Copy the ethhdr from first buffer to second. This
* is necessary for IP completions.
*/
if (*((u16 *) skb1->data) != 0xFFFF)
size = VLAN_ETH_HLEN;
else
size = ETH_HLEN;
skb_put(skb2, length); /* Just the second buffer length here. */
pci_unmap_single(qdev->pdev,
pci_unmap_addr(lrg_buf_cb2, mapaddr),
......@@ -1844,16 +1870,40 @@ static void ql_process_macip_rx_intr(struct ql3_adapter *qdev,
PCI_DMA_FROMDEVICE);
prefetch(skb2->data);
memcpy(skb_push(skb2, size), skb1->data + VLAN_ID_LEN, size);
skb2->dev = qdev->ndev;
skb2->ip_summed = CHECKSUM_NONE;
if (qdev->device_id == QL3022_DEVICE_ID) {
/*
* Copy the ethhdr from first buffer to second. This
* is necessary for 3022 IP completions.
*/
memcpy(skb_push(skb2, size), skb1->data + VLAN_ID_LEN, size);
} else {
u16 checksum = le16_to_cpu(ib_ip_rsp_ptr->checksum);
if (checksum &
(IB_IP_IOCB_RSP_3032_ICE |
IB_IP_IOCB_RSP_3032_CE |
IB_IP_IOCB_RSP_3032_NUC)) {
printk(KERN_ERR
"%s: Bad checksum for this %s packet, checksum = %x.\n",
__func__,
((checksum &
IB_IP_IOCB_RSP_3032_TCP) ? "TCP" :
"UDP"),checksum);
} else if (checksum & IB_IP_IOCB_RSP_3032_TCP) {
skb2->ip_summed = CHECKSUM_UNNECESSARY;
}
}
skb2->dev = qdev->ndev;
skb2->protocol = eth_type_trans(skb2, qdev->ndev);
netif_receive_skb(skb2);
qdev->stats.rx_packets++;
qdev->stats.rx_bytes += length;
ndev->last_rx = jiffies;
lrg_buf_cb2->skb = NULL;
ql_release_to_lrg_buf_free_list(qdev, lrg_buf_cb1);
if (qdev->device_id == QL3022_DEVICE_ID)
ql_release_to_lrg_buf_free_list(qdev, lrg_buf_cb1);
ql_release_to_lrg_buf_free_list(qdev, lrg_buf_cb2);
}
......@@ -1880,12 +1930,14 @@ static int ql_tx_rx_clean(struct ql3_adapter *qdev,
break;
case OPCODE_IB_MAC_IOCB:
case OPCODE_IB_3032_MAC_IOCB:
ql_process_mac_rx_intr(qdev, (struct ib_mac_iocb_rsp *)
net_rsp);
(*rx_cleaned)++;
break;
case OPCODE_IB_IP_IOCB:
case OPCODE_IB_3032_IP_IOCB:
ql_process_macip_rx_intr(qdev, (struct ib_ip_iocb_rsp *)
net_rsp);
(*rx_cleaned)++;
......@@ -2032,13 +2084,96 @@ static irqreturn_t ql3xxx_isr(int irq, void *dev_id)
return IRQ_RETVAL(handled);
}
/*
* Get the total number of segments needed for the
* given number of fragments. This is necessary because
* outbound address lists (OAL) will be used when more than
* two frags are given. Each address list has 5 addr/len
* pairs. The 5th pair in each AOL is used to point to
* the next AOL if more frags are coming.
* That is why the frags:segment count ratio is not linear.
*/
static int ql_get_seg_count(unsigned short frags)
{
switch(frags) {
case 0: return 1; /* just the skb->data seg */
case 1: return 2; /* skb->data + 1 frag */
case 2: return 3; /* skb->data + 2 frags */
case 3: return 5; /* skb->data + 1 frag + 1 AOL containting 2 frags */
case 4: return 6;
case 5: return 7;
case 6: return 8;
case 7: return 10;
case 8: return 11;
case 9: return 12;
case 10: return 13;
case 11: return 15;
case 12: return 16;
case 13: return 17;
case 14: return 18;
case 15: return 20;
case 16: return 21;
case 17: return 22;
case 18: return 23;
}
return -1;
}
static void ql_hw_csum_setup(struct sk_buff *skb,
struct ob_mac_iocb_req *mac_iocb_ptr)
{
struct ethhdr *eth;
struct iphdr *ip = NULL;
u8 offset = ETH_HLEN;
eth = (struct ethhdr *)(skb->data);
if (eth->h_proto == __constant_htons(ETH_P_IP)) {
ip = (struct iphdr *)&skb->data[ETH_HLEN];
} else if (eth->h_proto == htons(ETH_P_8021Q) &&
((struct vlan_ethhdr *)skb->data)->
h_vlan_encapsulated_proto == __constant_htons(ETH_P_IP)) {
ip = (struct iphdr *)&skb->data[VLAN_ETH_HLEN];
offset = VLAN_ETH_HLEN;
}
if (ip) {
if (ip->protocol == IPPROTO_TCP) {
mac_iocb_ptr->flags1 |= OB_3032MAC_IOCB_REQ_TC;
mac_iocb_ptr->ip_hdr_off = offset;
mac_iocb_ptr->ip_hdr_len = ip->ihl;
} else if (ip->protocol == IPPROTO_UDP) {
mac_iocb_ptr->flags1 |= OB_3032MAC_IOCB_REQ_UC;
mac_iocb_ptr->ip_hdr_off = offset;
mac_iocb_ptr->ip_hdr_len = ip->ihl;
}
}
}
/*
* The difference between 3022 and 3032 sends:
* 3022 only supports a simple single segment transmission.
* 3032 supports checksumming and scatter/gather lists (fragments).
* The 3032 supports sglists by using the 3 addr/len pairs (ALP)
* in the IOCB plus a chain of outbound address lists (OAL) that
* each contain 5 ALPs. The last ALP of the IOCB (3rd) or OAL (5th)
* will used to point to an OAL when more ALP entries are required.
* The IOCB is always the top of the chain followed by one or more
* OALs (when necessary).
*/
static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev)
{
struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev);
struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
struct ql_tx_buf_cb *tx_cb;
u32 tot_len = skb->len;
struct oal *oal;
struct oal_entry *oal_entry;
int len;
struct ob_mac_iocb_req *mac_iocb_ptr;
u64 map;
int seg_cnt, seg = 0;
int frag_cnt = (int)skb_shinfo(skb)->nr_frags;
if (unlikely(atomic_read(&qdev->tx_count) < 2)) {
if (!netif_queue_stopped(ndev))
......@@ -2046,21 +2181,79 @@ static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev)
return NETDEV_TX_BUSY;
}
tx_cb = &qdev->tx_buf[qdev->req_producer_index] ;
seg_cnt = tx_cb->seg_count = ql_get_seg_count((skb_shinfo(skb)->nr_frags));
if(seg_cnt == -1) {
printk(KERN_ERR PFX"%s: invalid segment count!\n",__func__);
return NETDEV_TX_OK;
}
mac_iocb_ptr = tx_cb->queue_entry;
memset((void *)mac_iocb_ptr, 0, sizeof(struct ob_mac_iocb_req));
mac_iocb_ptr->opcode = qdev->mac_ob_opcode;
mac_iocb_ptr->flags |= qdev->mb_bit_mask;
mac_iocb_ptr->transaction_id = qdev->req_producer_index;
mac_iocb_ptr->data_len = cpu_to_le16((u16) skb->len);
mac_iocb_ptr->data_len = cpu_to_le16((u16) tot_len);
tx_cb->skb = skb;
map = pci_map_single(qdev->pdev, skb->data, skb->len, PCI_DMA_TODEVICE);
mac_iocb_ptr->buf_addr0_low = cpu_to_le32(LS_64BITS(map));
mac_iocb_ptr->buf_addr0_high = cpu_to_le32(MS_64BITS(map));
mac_iocb_ptr->buf_0_len = cpu_to_le32(skb->len | OB_MAC_IOCB_REQ_E);
pci_unmap_addr_set(tx_cb, mapaddr, map);
pci_unmap_len_set(tx_cb, maplen, skb->len);
atomic_dec(&qdev->tx_count);
if (skb->ip_summed == CHECKSUM_PARTIAL)
ql_hw_csum_setup(skb, mac_iocb_ptr);
len = skb_headlen(skb);
map = pci_map_single(qdev->pdev, skb->data, len, PCI_DMA_TODEVICE);
oal_entry = (struct oal_entry *)&mac_iocb_ptr->buf_addr0_low;
oal_entry->dma_lo = cpu_to_le32(LS_64BITS(map));
oal_entry->dma_hi = cpu_to_le32(MS_64BITS(map));
oal_entry->len = cpu_to_le32(len);
pci_unmap_addr_set(&tx_cb->map[seg], mapaddr, map);
pci_unmap_len_set(&tx_cb->map[seg], maplen, len);
seg++;
if (!skb_shinfo(skb)->nr_frags) {
/* Terminate the last segment. */
oal_entry->len =
cpu_to_le32(le32_to_cpu(oal_entry->len) | OAL_LAST_ENTRY);
} else {
int i;
oal = tx_cb->oal;
for (i=0; i<frag_cnt; i++,seg++) {
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
oal_entry++;
if ((seg == 2 && seg_cnt > 3) || /* Check for continuation */
(seg == 7 && seg_cnt > 8) || /* requirements. It's strange */
(seg == 12 && seg_cnt > 13) || /* but necessary. */
(seg == 17 && seg_cnt > 18)) {
/* Continuation entry points to outbound address list. */
map = pci_map_single(qdev->pdev, oal,
sizeof(struct oal),
PCI_DMA_TODEVICE);
oal_entry->dma_lo = cpu_to_le32(LS_64BITS(map));
oal_entry->dma_hi = cpu_to_le32(MS_64BITS(map));
oal_entry->len =
cpu_to_le32(sizeof(struct oal) |
OAL_CONT_ENTRY);
pci_unmap_addr_set(&tx_cb->map[seg], mapaddr,
map);
pci_unmap_len_set(&tx_cb->map[seg], maplen,
len);
oal_entry = (struct oal_entry *)oal;
oal++;
seg++;
}
map =
pci_map_page(qdev->pdev, frag->page,
frag->page_offset, frag->size,
PCI_DMA_TODEVICE);
oal_entry->dma_lo = cpu_to_le32(LS_64BITS(map));
oal_entry->dma_hi = cpu_to_le32(MS_64BITS(map));
oal_entry->len = cpu_to_le32(frag->size);
pci_unmap_addr_set(&tx_cb->map[seg], mapaddr, map);
pci_unmap_len_set(&tx_cb->map[seg], maplen,
frag->size);
}
/* Terminate the last segment. */
oal_entry->len =
cpu_to_le32(le32_to_cpu(oal_entry->len) | OAL_LAST_ENTRY);
}
wmb();
qdev->req_producer_index++;
if (qdev->req_producer_index == NUM_REQ_Q_ENTRIES)
qdev->req_producer_index = 0;
......@@ -2074,8 +2267,10 @@ static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev)
printk(KERN_DEBUG PFX "%s: tx queued, slot %d, len %d\n",
ndev->name, qdev->req_producer_index, skb->len);
atomic_dec(&qdev->tx_count);
return NETDEV_TX_OK;
}
static int ql_alloc_net_req_rsp_queues(struct ql3_adapter *qdev)
{
qdev->req_q_size =
......@@ -2359,7 +2554,22 @@ static int ql_alloc_large_buffers(struct ql3_adapter *qdev)
return 0;
}
static void ql_create_send_free_list(struct ql3_adapter *qdev)
static void ql_free_send_free_list(struct ql3_adapter *qdev)
{
struct ql_tx_buf_cb *tx_cb;
int i;
tx_cb = &qdev->tx_buf[0];
for (i = 0; i < NUM_REQ_Q_ENTRIES; i++) {
if (tx_cb->oal) {
kfree(tx_cb->oal);
tx_cb->oal = NULL;
}
tx_cb++;
}
}
static int ql_create_send_free_list(struct ql3_adapter *qdev)
{
struct ql_tx_buf_cb *tx_cb;
int i;
......@@ -2368,11 +2578,16 @@ static void ql_create_send_free_list(struct ql3_adapter *qdev)
/* Create free list of transmit buffers */
for (i = 0; i < NUM_REQ_Q_ENTRIES; i++) {
tx_cb = &qdev->tx_buf[i];
tx_cb->skb = NULL;
tx_cb->queue_entry = req_q_curr;
req_q_curr++;
tx_cb->oal = kmalloc(512, GFP_KERNEL);
if (tx_cb->oal == NULL)
return -1;
}
return 0;
}
static int ql_alloc_mem_resources(struct ql3_adapter *qdev)
......@@ -2447,12 +2662,14 @@ static int ql_alloc_mem_resources(struct ql3_adapter *qdev)
/* Initialize the large buffer queue. */
ql_init_large_buffers(qdev);
ql_create_send_free_list(qdev);
if (ql_create_send_free_list(qdev))
goto err_free_list;
qdev->rsp_current = qdev->rsp_q_virt_addr;
return 0;
err_free_list:
ql_free_send_free_list(qdev);
err_small_buffers:
ql_free_buffer_queues(qdev);
err_buffer_queues:
......@@ -2468,6 +2685,7 @@ err_req_rsp:
static void ql_free_mem_resources(struct ql3_adapter *qdev)
{
ql_free_send_free_list(qdev);
ql_free_large_buffers(qdev);
ql_free_small_buffers(qdev);
ql_free_buffer_queues(qdev);
......@@ -2766,11 +2984,20 @@ static int ql_adapter_initialize(struct ql3_adapter *qdev)
}
/* Enable Ethernet Function */
value =
(PORT_CONTROL_EF | PORT_CONTROL_ET | PORT_CONTROL_EI |
PORT_CONTROL_HH);
ql_write_page0_reg(qdev, &port_regs->portControl,
((value << 16) | value));
if (qdev->device_id == QL3032_DEVICE_ID) {
value =
(QL3032_PORT_CONTROL_EF | QL3032_PORT_CONTROL_KIE |
QL3032_PORT_CONTROL_EIv6 | QL3032_PORT_CONTROL_EIv4);
ql_write_page0_reg(qdev, &port_regs->functionControl,
((value << 16) | value));
} else {
value =
(PORT_CONTROL_EF | PORT_CONTROL_ET | PORT_CONTROL_EI |
PORT_CONTROL_HH);
ql_write_page0_reg(qdev, &port_regs->portControl,
((value << 16) | value));
}
out:
return status;
......@@ -2917,8 +3144,10 @@ static void ql_display_dev_info(struct net_device *ndev)
struct pci_dev *pdev = qdev->pdev;
printk(KERN_INFO PFX
"\n%s Adapter %d RevisionID %d found on PCI slot %d.\n",
DRV_NAME, qdev->index, qdev->chip_rev_id, qdev->pci_slot);
"\n%s Adapter %d RevisionID %d found %s on PCI slot %d.\n",
DRV_NAME, qdev->index, qdev->chip_rev_id,
(qdev->device_id == QL3032_DEVICE_ID) ? "QLA3032" : "QLA3022",
qdev->pci_slot);
printk(KERN_INFO PFX
"%s Interface.\n",
test_bit(QL_LINK_OPTICAL,&qdev->flags) ? "OPTICAL" : "COPPER");
......@@ -3212,15 +3441,22 @@ static void ql_reset_work(struct work_struct *work)
* Loop through the active list and return the skb.
*/
for (i = 0; i < NUM_REQ_Q_ENTRIES; i++) {
int j;
tx_cb = &qdev->tx_buf[i];
if (tx_cb->skb) {
printk(KERN_DEBUG PFX
"%s: Freeing lost SKB.\n",
qdev->ndev->name);
pci_unmap_single(qdev->pdev,
pci_unmap_addr(tx_cb, mapaddr),
pci_unmap_len(tx_cb, maplen), PCI_DMA_TODEVICE);
pci_unmap_addr(&tx_cb->map[0], mapaddr),
pci_unmap_len(&tx_cb->map[0], maplen),
PCI_DMA_TODEVICE);
for(j=1;j<tx_cb->seg_count;j++) {
pci_unmap_page(qdev->pdev,
pci_unmap_addr(&tx_cb->map[j],mapaddr),
pci_unmap_len(&tx_cb->map[j],maplen),
PCI_DMA_TODEVICE);
}
dev_kfree_skb(tx_cb->skb);
tx_cb->skb = NULL;
}
......@@ -3379,21 +3615,24 @@ static int __devinit ql3xxx_probe(struct pci_dev *pdev,
SET_MODULE_OWNER(ndev);
SET_NETDEV_DEV(ndev, &pdev->dev);
if (pci_using_dac)
ndev->features |= NETIF_F_HIGHDMA;
pci_set_drvdata(pdev, ndev);
qdev = netdev_priv(ndev);
qdev->index = cards_found;
qdev->ndev = ndev;
qdev->pdev = pdev;
qdev->device_id = pci_entry->device;
qdev->port_link_state = LS_DOWN;
if (msi)
qdev->msi = 1;
qdev->msg_enable = netif_msg_init(debug, default_msg);
if (pci_using_dac)
ndev->features |= NETIF_F_HIGHDMA;
if (qdev->device_id == QL3032_DEVICE_ID)
ndev->features |= (NETIF_F_HW_CSUM | NETIF_F_SG);
qdev->mem_map_registers =
ioremap_nocache(pci_resource_start(pdev, 1),
pci_resource_len(qdev->pdev, 1));
......
drivers/net/qla3xxx.h 100644 → 100755
View file @ bd36b0ac
......@@ -21,7 +21,9 @@
#define OPCODE_UPDATE_NCB_IOCB 0xF0
#define OPCODE_IB_MAC_IOCB 0xF9
#define OPCODE_IB_3032_MAC_IOCB 0x09
#define OPCODE_IB_IP_IOCB 0xFA
#define OPCODE_IB_3032_IP_IOCB 0x0A
#define OPCODE_IB_TCP_IOCB 0xFB
#define OPCODE_DUMP_PROTO_IOCB 0xFE
#define OPCODE_BUFFER_ALERT_IOCB 0xFB
......@@ -37,18 +39,23 @@
struct ob_mac_iocb_req {
u8 opcode;
u8 flags;
#define OB_MAC_IOCB_REQ_MA 0xC0
#define OB_MAC_IOCB_REQ_F 0x20
#define OB_MAC_IOCB_REQ_X 0x10
#define OB_MAC_IOCB_REQ_MA 0xe0
#define OB_MAC_IOCB_REQ_F 0x10
#define OB_MAC_IOCB_REQ_X 0x08
#define OB_MAC_IOCB_REQ_D 0x02
#define OB_MAC_IOCB_REQ_I 0x01
__le16 reserved0;
u8 flags1;
#define OB_3032MAC_IOCB_REQ_IC 0x04
#define OB_3032MAC_IOCB_REQ_TC 0x02
#define OB_3032MAC_IOCB_REQ_UC 0x01
u8 reserved0;
__le32 transaction_id;
__le16 data_len;
__le16 reserved1;
u8 ip_hdr_off;
u8 ip_hdr_len;
__le32 reserved1;
__le32 reserved2;
__le32 reserved3;
__le32 buf_addr0_low;
__le32 buf_addr0_high;
__le32 buf_0_len;
......@@ -58,8 +65,8 @@ struct ob_mac_iocb_req {
__le32 buf_addr2_low;
__le32 buf_addr2_high;
__le32 buf_2_len;
__le32 reserved3;
__le32 reserved4;
__le32 reserved5;
};
/*
* The following constants define control bits for buffer
......@@ -74,6 +81,7 @@ struct ob_mac_iocb_rsp {
u8 opcode;
u8 flags;
#define OB_MAC_IOCB_RSP_P 0x08
#define OB_MAC_IOCB_RSP_L 0x04
#define OB_MAC_IOCB_RSP_S 0x02
#define OB_MAC_IOCB_RSP_I 0x01
......@@ -85,6 +93,7 @@ struct ob_mac_iocb_rsp {
struct ib_mac_iocb_rsp {
u8 opcode;
#define IB_MAC_IOCB_RSP_V 0x80
u8 flags;
#define IB_MAC_IOCB_RSP_S 0x80
#define IB_MAC_IOCB_RSP_H1 0x40
......@@ -138,6 +147,7 @@ struct ob_ip_iocb_req {
struct ob_ip_iocb_rsp {
u8 opcode;
u8 flags;
#define OB_MAC_IOCB_RSP_H 0x10
#define OB_MAC_IOCB_RSP_E 0x08
#define OB_MAC_IOCB_RSP_L 0x04
#define OB_MAC_IOCB_RSP_S 0x02
......@@ -220,6 +230,10 @@ struct ob_tcp_iocb_rsp {
struct ib_ip_iocb_rsp {
u8 opcode;
#define IB_IP_IOCB_RSP_3032_V 0x80
#define IB_IP_IOCB_RSP_3032_O 0x40
#define IB_IP_IOCB_RSP_3032_I 0x20
#define IB_IP_IOCB_RSP_3032_R 0x10
u8 flags;
#define IB_IP_IOCB_RSP_S 0x80
#define IB_IP_IOCB_RSP_H1 0x40
......@@ -230,6 +244,12 @@ struct ib_ip_iocb_rsp {
__le16 length;
__le16 checksum;
#define IB_IP_IOCB_RSP_3032_ICE 0x01
#define IB_IP_IOCB_RSP_3032_CE 0x02
#define IB_IP_IOCB_RSP_3032_NUC 0x04
#define IB_IP_IOCB_RSP_3032_UDP 0x08
#define IB_IP_IOCB_RSP_3032_TCP 0x10
#define IB_IP_IOCB_RSP_3032_IPE 0x20
__le16 reserved;
#define IB_IP_IOCB_RSP_R 0x01
__le32 ial_low;
......@@ -524,6 +544,21 @@ enum {
IP_ADDR_INDEX_REG_FUNC_2_SEC = 0x0005,
IP_ADDR_INDEX_REG_FUNC_3_PRI = 0x0006,
IP_ADDR_INDEX_REG_FUNC_3_SEC = 0x0007,
IP_ADDR_INDEX_REG_6 = 0x0008,
IP_ADDR_INDEX_REG_OFFSET_MASK = 0x0030,
IP_ADDR_INDEX_REG_E = 0x0040,
};
enum {
QL3032_PORT_CONTROL_DS = 0x0001,
QL3032_PORT_CONTROL_HH = 0x0002,
QL3032_PORT_CONTROL_EIv6 = 0x0004,
QL3032_PORT_CONTROL_EIv4 = 0x0008,
QL3032_PORT_CONTROL_ET = 0x0010,
QL3032_PORT_CONTROL_EF = 0x0020,
QL3032_PORT_CONTROL_DRM = 0x0040,
QL3032_PORT_CONTROL_RLB = 0x0080,
QL3032_PORT_CONTROL_RCB = 0x0100,
QL3032_PORT_CONTROL_KIE = 0x0200,
};
enum {
......@@ -657,7 +692,8 @@ struct ql3xxx_port_registers {
u32 internalRamWDataReg;
u32 reclaimedBufferAddrRegLow;
u32 reclaimedBufferAddrRegHigh;
u32 reserved[2];
u32 tcpConfiguration;
u32 functionControl;
u32 fpgaRevID;
u32 localRamAddr;
u32 localRamDataAutoIncr;
......@@ -963,6 +999,7 @@ struct eeprom_data {
#define QL3XXX_VENDOR_ID 0x1077
#define QL3022_DEVICE_ID 0x3022
#define QL3032_DEVICE_ID 0x3032
/* MTU & Frame Size stuff */
#define NORMAL_MTU_SIZE ETH_DATA_LEN
......@@ -1038,11 +1075,41 @@ struct ql_rcv_buf_cb {
int index;
};
/*
* Original IOCB has 3 sg entries:
* first points to skb-data area
* second points to first frag
* third points to next oal.
* OAL has 5 entries:
* 1 thru 4 point to frags
* fifth points to next oal.
*/
#define MAX_OAL_CNT ((MAX_SKB_FRAGS-1)/4 + 1)
struct oal_entry {
u32 dma_lo;
u32 dma_hi;
u32 len;
#define OAL_LAST_ENTRY 0x80000000 /* Last valid buffer in list. */
#define OAL_CONT_ENTRY 0x40000000 /* points to an OAL. (continuation) */
u32 reserved;
};
struct oal {
struct oal_entry oal_entry[5];
};
struct map_list {
DECLARE_PCI_UNMAP_ADDR(mapaddr);
DECLARE_PCI_UNMAP_LEN(maplen);
};
struct ql_tx_buf_cb {
struct sk_buff *skb;
struct ob_mac_iocb_req *queue_entry ;
DECLARE_PCI_UNMAP_ADDR(mapaddr);
DECLARE_PCI_UNMAP_LEN(maplen);
int seg_count;
struct oal *oal;
struct map_list map[MAX_SKB_FRAGS+1];
};
/* definitions for type field */
......@@ -1189,6 +1256,7 @@ struct ql3_adapter {
struct delayed_work reset_work;
struct delayed_work tx_timeout_work;
u32 max_frame_size;
u32 device_id;
};
#endif /* _QLA3XXX_H_ */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment