TULIP: Fix for 64-bit MIPS

From: Jim Gifford <maillist@jg555.com>, Grant Grundler <grundler@parisc-linux.org>, Peter Horton <pdh@colonel-panic.org>

With Grant's help I was able to get the tulip driver to work with 64 bit
MIPS.

[VAL: I'm happy with the 1.5 ms max delay; it doesn't seem excessive.]
Signed-off-by: Valerie Henson <val_henson@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

drivers/net/tulip/media.c

@@ -44,8 +44,10 @@ static const unsigned char comet_miireg2offset[32] = {
 
 /* MII transceiver control section.
    Read and write the MII registers using software-generated serial
-   MDIO protocol.  See the MII specifications or DP83840A data sheet
-   for details. */
+   MDIO protocol.
+   See IEEE 802.3-2002.pdf (Section 2, Chapter "22.2.4 Management functions")
+   or DP83840A data sheet for more details.
+   */
 
 int tulip_mdio_read(struct net_device *dev, int phy_id, int location)
 {
@@ -272,13 +274,29 @@ void tulip_select_media(struct net_device *dev, int startup)
 				int reset_length = p[2 + init_length];
 				misc_info = (u16*)(reset_sequence + reset_length);
 				if (startup) {
+					int timeout = 10;	/* max 1 ms */
 					iowrite32(mtable->csr12dir | 0x100, ioaddr + CSR12);
 					for (i = 0; i < reset_length; i++)
 						iowrite32(reset_sequence[i], ioaddr + CSR12);
+
+					/* flush posted writes */
+					ioread32(ioaddr + CSR12);
+
+					/* Sect 3.10.3 in DP83840A.pdf (p39) */
+					udelay(500);
+
+					/* Section 4.2 in DP83840A.pdf (p43) */
+					/* and IEEE 802.3 "22.2.4.1.1 Reset" */
+					while (timeout-- &&
+						(tulip_mdio_read (dev, phy_num, MII_BMCR) & BMCR_RESET))
+						udelay(100);
 				}
 				for (i = 0; i < init_length; i++)
 					iowrite32(init_sequence[i], ioaddr + CSR12);
+
+				ioread32(ioaddr + CSR12);	/* flush posted writes */
 			}
+
 			tmp_info = get_u16(&misc_info[1]);
 			if (tmp_info)
 				tp->advertising[phy_num] = tmp_info | 1;

drivers/net/tulip/tulip.h

@@ -482,8 +482,11 @@ static inline void tulip_stop_rxtx(struct tulip_private *tp)
 			udelay(10);
 
 		if (!i)
-			printk(KERN_DEBUG "%s: tulip_stop_rxtx() failed\n",
-					pci_name(tp->pdev));
+			printk(KERN_DEBUG "%s: tulip_stop_rxtx() failed"
+					" (CSR5 0x%x CSR6 0x%x)\n",
+					pci_name(tp->pdev),
+					ioread32(ioaddr + CSR5),
+					ioread32(ioaddr + CSR6));
 	}
 }