Skip to content

L
linux-davinci-2.6.23
Commit 9cf93d7b authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge master.kernel.org:/home/rmk/linux-2.6-arm

parents 40122150 c6bd2328
Show whitespace changes
Inline Side-by-side
Showing with 658 additions and 372 deletions
arch/arm/configs/enp2611_defconfig
View file @ 9cf93d7b
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13
# Wed Sep 14 10:51:52 2005
# Linux kernel version: 2.6.14-git13
# Thu Nov 10 15:12:48 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
......@@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
......@@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
......@@ -60,6 +62,23 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
......@@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
......@@ -124,7 +144,6 @@ CONFIG_XSCALE_PMU=y
CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
......@@ -144,6 +163,8 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
......@@ -162,6 +183,7 @@ CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmw
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
# CONFIG_FPE_FASTFPE is not set
#
......@@ -205,13 +227,18 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
......@@ -228,6 +255,10 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
......@@ -238,6 +269,7 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
......@@ -273,6 +305,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
......@@ -307,7 +340,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_IXP2000=y
# CONFIG_MTD_EDB7312 is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PLATRAM is not set
......@@ -333,6 +365,11 @@ CONFIG_MTD_IXP2000=y
#
# CONFIG_MTD_NAND is not set
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
#
......@@ -358,21 +395,13 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
......@@ -409,6 +438,11 @@ CONFIG_DUMMY=y
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
......@@ -416,6 +450,7 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
......@@ -455,6 +490,7 @@ CONFIG_EEPRO100=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
......@@ -464,6 +500,7 @@ CONFIG_EEPRO100=y
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
......@@ -609,6 +646,7 @@ CONFIG_IXP2000_WATCHDOG=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
......@@ -634,7 +672,6 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
CONFIG_I2C_IXP2000=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
......@@ -649,7 +686,6 @@ CONFIG_I2C_IXP2000=y
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
CONFIG_I2C_SENSOR=y
#
# Miscellaneous I2C Chip support
......@@ -662,6 +698,7 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
......@@ -671,6 +708,7 @@ CONFIG_SENSORS_EEPROM=y
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
......@@ -701,6 +739,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
......@@ -710,6 +749,10 @@ CONFIG_HWMON=y
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
......@@ -737,6 +780,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
......@@ -765,10 +812,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
......@@ -777,6 +820,7 @@ CONFIG_INOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
......@@ -796,11 +840,10 @@ CONFIG_DNOTIFY=y
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
......@@ -816,6 +859,7 @@ CONFIG_RAMFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
......@@ -848,6 +892,7 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
......@@ -886,6 +931,7 @@ CONFIG_MSDOS_PARTITION=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
......@@ -894,7 +940,9 @@ CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
......@@ -920,6 +968,7 @@ CONFIG_DEBUG_LL=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
......
arch/arm/configs/ixdp2400_defconfig
View file @ 9cf93d7b
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13
# Wed Sep 14 10:52:01 2005
# Linux kernel version: 2.6.14-git13
# Thu Nov 10 15:14:13 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
......@@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
......@@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
......@@ -60,6 +62,23 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
......@@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
......@@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y
CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
......@@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
......@@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmw
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
# CONFIG_FPE_FASTFPE is not set
#
......@@ -206,13 +228,18 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
......@@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
......@@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
......@@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
......@@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_IXP2000=y
# CONFIG_MTD_EDB7312 is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PLATRAM is not set
......@@ -334,6 +366,11 @@ CONFIG_MTD_IXP2000=y
#
# CONFIG_MTD_NAND is not set
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
#
......@@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
......@@ -410,6 +439,11 @@ CONFIG_DUMMY=y
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
......@@ -417,6 +451,7 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
......@@ -456,6 +491,7 @@ CONFIG_EEPRO100=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
......@@ -465,6 +501,7 @@ CONFIG_EEPRO100=y
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
......@@ -610,6 +647,7 @@ CONFIG_IXP2000_WATCHDOG=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
......@@ -635,7 +673,6 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
CONFIG_I2C_IXP2000=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
......@@ -650,7 +687,6 @@ CONFIG_I2C_IXP2000=y
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
CONFIG_I2C_SENSOR=y
#
# Miscellaneous I2C Chip support
......@@ -663,6 +699,7 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
......@@ -672,6 +709,7 @@ CONFIG_SENSORS_EEPROM=y
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
......@@ -702,6 +740,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
......@@ -711,6 +750,10 @@ CONFIG_HWMON=y
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
......@@ -738,6 +781,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
......@@ -766,10 +813,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
......@@ -778,6 +821,7 @@ CONFIG_INOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
......@@ -797,11 +841,10 @@ CONFIG_DNOTIFY=y
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
......@@ -817,6 +860,7 @@ CONFIG_RAMFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
......@@ -849,6 +893,7 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
......@@ -887,6 +932,7 @@ CONFIG_MSDOS_PARTITION=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
......@@ -895,7 +941,9 @@ CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
......@@ -921,6 +969,7 @@ CONFIG_DEBUG_LL=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
......
arch/arm/configs/ixdp2401_defconfig
View file @ 9cf93d7b
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13
# Wed Sep 14 10:52:10 2005
# Linux kernel version: 2.6.14-git13
# Thu Nov 10 15:14:50 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
......@@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
......@@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
......@@ -60,6 +62,23 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
......@@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
......@@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y
CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
......@@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
......@@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firm
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
# CONFIG_FPE_FASTFPE is not set
#
......@@ -206,13 +228,18 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
......@@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
......@@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
......@@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
......@@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_IXP2000=y
# CONFIG_MTD_EDB7312 is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PLATRAM is not set
......@@ -334,6 +366,11 @@ CONFIG_MTD_IXP2000=y
#
# CONFIG_MTD_NAND is not set
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
#
......@@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
......@@ -410,6 +439,11 @@ CONFIG_DUMMY=y
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
......@@ -417,6 +451,7 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
......@@ -457,6 +492,7 @@ CONFIG_EEPRO100=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
......@@ -466,6 +502,7 @@ CONFIG_EEPRO100=y
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
......@@ -611,6 +648,7 @@ CONFIG_IXP2000_WATCHDOG=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
......@@ -636,7 +674,6 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
CONFIG_I2C_IXP2000=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
......@@ -651,7 +688,6 @@ CONFIG_I2C_IXP2000=y
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
CONFIG_I2C_SENSOR=y
#
# Miscellaneous I2C Chip support
......@@ -664,6 +700,7 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
......@@ -673,6 +710,7 @@ CONFIG_SENSORS_EEPROM=y
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
......@@ -703,6 +741,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
......@@ -712,6 +751,10 @@ CONFIG_HWMON=y
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
......@@ -739,6 +782,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
......@@ -767,10 +814,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
......@@ -779,6 +822,7 @@ CONFIG_INOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
......@@ -798,11 +842,10 @@ CONFIG_DNOTIFY=y
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
......@@ -818,6 +861,7 @@ CONFIG_RAMFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
......@@ -850,6 +894,7 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
......@@ -888,6 +933,7 @@ CONFIG_MSDOS_PARTITION=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
......@@ -896,7 +942,9 @@ CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
......@@ -922,6 +970,7 @@ CONFIG_DEBUG_LL=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
......
arch/arm/configs/ixdp2800_defconfig
View file @ 9cf93d7b
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13
# Wed Sep 14 10:52:23 2005
# Linux kernel version: 2.6.14-git13
# Thu Nov 10 15:14:56 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
......@@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
......@@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
......@@ -60,6 +62,23 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
......@@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
......@@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y
CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
......@@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
......@@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,9600 root=/dev/nfs ip=bootp mem=64M@0x0"
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
# CONFIG_FPE_FASTFPE is not set
#
......@@ -206,13 +228,18 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
......@@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
......@@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
......@@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
......@@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_IXP2000=y
# CONFIG_MTD_EDB7312 is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PLATRAM is not set
......@@ -334,6 +366,11 @@ CONFIG_MTD_IXP2000=y
#
# CONFIG_MTD_NAND is not set
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
#
......@@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
......@@ -410,6 +439,11 @@ CONFIG_DUMMY=y
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
......@@ -417,6 +451,7 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
......@@ -456,6 +491,7 @@ CONFIG_EEPRO100=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
......@@ -465,6 +501,7 @@ CONFIG_EEPRO100=y
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
......@@ -610,6 +647,7 @@ CONFIG_IXP2000_WATCHDOG=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
......@@ -635,7 +673,6 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
CONFIG_I2C_IXP2000=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
......@@ -650,7 +687,6 @@ CONFIG_I2C_IXP2000=y
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
CONFIG_I2C_SENSOR=y
#
# Miscellaneous I2C Chip support
......@@ -663,6 +699,7 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
......@@ -672,6 +709,7 @@ CONFIG_SENSORS_EEPROM=y
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
......@@ -702,6 +740,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
......@@ -711,6 +750,10 @@ CONFIG_HWMON=y
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
......@@ -738,6 +781,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
......@@ -766,10 +813,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
......@@ -778,6 +821,7 @@ CONFIG_INOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
......@@ -797,11 +841,10 @@ CONFIG_DNOTIFY=y
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
......@@ -817,6 +860,7 @@ CONFIG_RAMFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
......@@ -849,6 +893,7 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
......@@ -887,6 +932,7 @@ CONFIG_MSDOS_PARTITION=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
......@@ -895,7 +941,9 @@ CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
......@@ -921,6 +969,7 @@ CONFIG_DEBUG_LL=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
......
arch/arm/configs/ixdp2801_defconfig
View file @ 9cf93d7b
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13
# Wed Sep 14 10:52:16 2005
# Linux kernel version: 2.6.14-git13
# Thu Nov 10 15:15:03 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
......@@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
......@@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
......@@ -60,6 +62,23 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
......@@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
......@@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y
CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
......@@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
......@@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firm
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
# CONFIG_FPE_FASTFPE is not set
#
......@@ -206,13 +228,18 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
......@@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
......@@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
......@@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
......@@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_IXP2000=y
# CONFIG_MTD_EDB7312 is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PLATRAM is not set
......@@ -334,6 +366,11 @@ CONFIG_MTD_IXP2000=y
#
# CONFIG_MTD_NAND is not set
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
#
......@@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
......@@ -410,6 +439,11 @@ CONFIG_DUMMY=y
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
......@@ -417,6 +451,7 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
......@@ -457,6 +492,7 @@ CONFIG_EEPRO100=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
......@@ -466,6 +502,7 @@ CONFIG_EEPRO100=y
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
......@@ -611,6 +648,7 @@ CONFIG_IXP2000_WATCHDOG=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
......@@ -636,7 +674,6 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
CONFIG_I2C_IXP2000=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
......@@ -651,7 +688,6 @@ CONFIG_I2C_IXP2000=y
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
CONFIG_I2C_SENSOR=y
#
# Miscellaneous I2C Chip support
......@@ -664,6 +700,7 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
......@@ -673,6 +710,7 @@ CONFIG_SENSORS_EEPROM=y
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
......@@ -703,6 +741,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
......@@ -712,6 +751,10 @@ CONFIG_HWMON=y
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
......@@ -739,6 +782,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
......@@ -767,10 +814,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
......@@ -779,6 +822,7 @@ CONFIG_INOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
......@@ -798,11 +842,10 @@ CONFIG_DNOTIFY=y
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
......@@ -818,6 +861,7 @@ CONFIG_RAMFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
......@@ -850,6 +894,7 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
......@@ -888,6 +933,7 @@ CONFIG_MSDOS_PARTITION=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
......@@ -896,7 +942,9 @@ CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
......@@ -922,6 +970,7 @@ CONFIG_DEBUG_LL=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
......
arch/arm/lib/csumpartial.S
View file @ 9cf93d7b
......@@ -26,7 +26,7 @@ td1 .req r4 @ save before use
td2 .req r5 @ save before use
td3 .req lr
.zero: mov r0, sum
.Lzero: mov r0, sum
add sp, sp, #4
ldr pc, [sp], #4
......@@ -34,8 +34,8 @@ td3 .req lr
* Handle 0 to 7 bytes, with any alignment of source and
* destination pointers. Note that when we get here, C = 0
*/
.less8: teq len, #0 @ check for zero count
beq .zero
.Lless8: teq len, #0 @ check for zero count
beq .Lzero
/* we must have at least one byte. */
tst buf, #1 @ odd address?
......@@ -44,12 +44,12 @@ td3 .req lr
subne len, len, #1
adcnes sum, sum, td0, put_byte_1
.less4: tst len, #6
beq .less8_byte
.Lless4: tst len, #6
beq .Lless8_byte
/* we are now half-word aligned */
.less8_wordlp:
.Lless8_wordlp:
#if __LINUX_ARM_ARCH__ >= 4
ldrh td0, [buf], #2
sub len, len, #2
......@@ -65,19 +65,19 @@ td3 .req lr
#endif
adcs sum, sum, td0
tst len, #6
bne .less8_wordlp
bne .Lless8_wordlp
.less8_byte: tst len, #1 @ odd number of bytes
.Lless8_byte: tst len, #1 @ odd number of bytes
ldrneb td0, [buf], #1 @ include last byte
adcnes sum, sum, td0, put_byte_0 @ update checksum
.done: adc r0, sum, #0 @ collect up the last carry
.Ldone: adc r0, sum, #0 @ collect up the last carry
ldr td0, [sp], #4
tst td0, #1 @ check buffer alignment
movne r0, r0, ror #8 @ rotate checksum by 8 bits
ldr pc, [sp], #4 @ return
.not_aligned: tst buf, #1 @ odd address
.Lnot_aligned: tst buf, #1 @ odd address
ldrneb td0, [buf], #1 @ make even
subne len, len, #1
adcnes sum, sum, td0, put_byte_1 @ update checksum
......@@ -102,14 +102,14 @@ td3 .req lr
ENTRY(csum_partial)
stmfd sp!, {buf, lr}
cmp len, #8 @ Ensure that we have at least
blo .less8 @ 8 bytes to copy.
blo .Lless8 @ 8 bytes to copy.
tst buf, #1
movne sum, sum, ror #8
adds sum, sum, #0 @ C = 0
tst buf, #3 @ Test destination alignment
blne .not_aligned @ aligh destination, return here
blne .Lnot_aligned @ align destination, return here
1: bics ip, len, #31
beq 3f
......@@ -131,11 +131,11 @@ ENTRY(csum_partial)
ldmfd sp!, {r4 - r5}
3: tst len, #0x1c @ should not change C
beq .less4
beq .Lless4
4: ldr td0, [buf], #4
sub len, len, #4
adcs sum, sum, td0
tst len, #0x1c
bne 4b
b .less4
b .Lless4
arch/arm/lib/csumpartialcopygeneric.S
View file @ 9cf93d7b
......@@ -22,7 +22,7 @@ dst .req r1
len .req r2
sum .req r3
.zero: mov r0, sum
.Lzero: mov r0, sum
load_regs ea
/*
......@@ -31,8 +31,9 @@ sum .req r3
* the length. Note that the source pointer hasn't been
* aligned yet.
*/
.dst_unaligned: tst dst, #1
beq .dst_16bit
.Ldst_unaligned:
tst dst, #1
beq .Ldst_16bit
load1b ip
sub len, len, #1
......@@ -41,7 +42,7 @@ sum .req r3
tst dst, #2
moveq pc, lr @ dst is now 32bit aligned
.dst_16bit: load2b r8, ip
.Ldst_16bit: load2b r8, ip
sub len, len, #2
adcs sum, sum, r8, put_byte_0
strb r8, [dst], #1
......@@ -53,12 +54,12 @@ sum .req r3
* Handle 0 to 7 bytes, with any alignment of source and
* destination pointers. Note that when we get here, C = 0
*/
.less8: teq len, #0 @ check for zero count
beq .zero
.Lless8: teq len, #0 @ check for zero count
beq .Lzero
/* we must have at least one byte. */
tst dst, #1 @ dst 16-bit aligned
beq .less8_aligned
beq .Lless8_aligned
/* Align dst */
load1b ip
......@@ -66,7 +67,7 @@ sum .req r3
adcs sum, sum, ip, put_byte_1 @ update checksum
strb ip, [dst], #1
tst len, #6
beq .less8_byteonly
beq .Lless8_byteonly
1: load2b r8, ip
sub len, len, #2
......@@ -74,15 +75,16 @@ sum .req r3
strb r8, [dst], #1
adcs sum, sum, ip, put_byte_1
strb ip, [dst], #1
.less8_aligned: tst len, #6
.Lless8_aligned:
tst len, #6
bne 1b
.less8_byteonly:
.Lless8_byteonly:
tst len, #1
beq .done
beq .Ldone
load1b r8
adcs sum, sum, r8, put_byte_0 @ update checksum
strb r8, [dst], #1
b .done
b .Ldone
FN_ENTRY
mov ip, sp
......@@ -90,11 +92,11 @@ FN_ENTRY
sub fp, ip, #4
cmp len, #8 @ Ensure that we have at least
blo .less8 @ 8 bytes to copy.
blo .Lless8 @ 8 bytes to copy.
adds sum, sum, #0 @ C = 0
tst dst, #3 @ Test destination alignment
blne .dst_unaligned @ align destination, return here
blne .Ldst_unaligned @ align destination, return here
/*
* Ok, the dst pointer is now 32bit aligned, and we know
......@@ -103,7 +105,7 @@ FN_ENTRY
*/
tst src, #3 @ Test source alignment
bne .src_not_aligned
bne .Lsrc_not_aligned
/* Routine for src & dst aligned */
......@@ -136,17 +138,17 @@ FN_ENTRY
adcs sum, sum, r4
4: ands len, len, #3
beq .done
beq .Ldone
load1l r4
tst len, #2
mov r5, r4, get_byte_0
beq .exit
beq .Lexit
adcs sum, sum, r4, push #16
strb r5, [dst], #1
mov r5, r4, get_byte_1
strb r5, [dst], #1
mov r5, r4, get_byte_2
.exit: tst len, #1
.Lexit: tst len, #1
strneb r5, [dst], #1
andne r5, r5, #255
adcnes sum, sum, r5, put_byte_0
......@@ -157,20 +159,20 @@ FN_ENTRY
* the inefficient byte manipulations in the
* architecture independent code.
*/
.done: adc r0, sum, #0
.Ldone: adc r0, sum, #0
ldr sum, [sp, #0] @ dst
tst sum, #1
movne r0, r0, ror #8
load_regs ea
.src_not_aligned:
.Lsrc_not_aligned:
adc sum, sum, #0 @ include C from dst alignment
and ip, src, #3
bic src, src, #3
load1l r5
cmp ip, #2
beq .src2_aligned
bhi .src3_aligned
beq .Lsrc2_aligned
bhi .Lsrc3_aligned
mov r4, r5, pull #8 @ C = 0
bics ip, len, #15
beq 2f
......@@ -211,18 +213,18 @@ FN_ENTRY
adcs sum, sum, r4
mov r4, r5, pull #8
4: ands len, len, #3
beq .done
beq .Ldone
mov r5, r4, get_byte_0
tst len, #2
beq .exit
beq .Lexit
adcs sum, sum, r4, push #16
strb r5, [dst], #1
mov r5, r4, get_byte_1
strb r5, [dst], #1
mov r5, r4, get_byte_2
b .exit
b .Lexit
.src2_aligned: mov r4, r5, pull #16
.Lsrc2_aligned: mov r4, r5, pull #16
adds sum, sum, #0
bics ip, len, #15
beq 2f
......@@ -263,20 +265,20 @@ FN_ENTRY
adcs sum, sum, r4
mov r4, r5, pull #16
4: ands len, len, #3
beq .done
beq .Ldone
mov r5, r4, get_byte_0
tst len, #2
beq .exit
beq .Lexit
adcs sum, sum, r4
strb r5, [dst], #1
mov r5, r4, get_byte_1
strb r5, [dst], #1
tst len, #1
beq .done
beq .Ldone
load1b r5
b .exit
b .Lexit
.src3_aligned: mov r4, r5, pull #24
.Lsrc3_aligned: mov r4, r5, pull #24
adds sum, sum, #0
bics ip, len, #15
beq 2f
......@@ -317,10 +319,10 @@ FN_ENTRY
adcs sum, sum, r4
mov r4, r5, pull #24
4: ands len, len, #3
beq .done
beq .Ldone
mov r5, r4, get_byte_0
tst len, #2
beq .exit
beq .Lexit
strb r5, [dst], #1
adcs sum, sum, r4
load1l r4
......@@ -328,4 +330,4 @@ FN_ENTRY
strb r5, [dst], #1
adcs sum, sum, r4, push #24
mov r5, r4, get_byte_1
b .exit
b .Lexit
arch/arm/lib/delay.S
View file @ 9cf93d7b
......@@ -11,7 +11,7 @@
#include <asm/assembler.h>
.text
LC0: .word loops_per_jiffy
.LC0: .word loops_per_jiffy
/*
* 0 <= r0 <= 2000
......@@ -21,7 +21,7 @@ ENTRY(__udelay)
orr r2, r2, #0x00db
mul r0, r2, r0
ENTRY(__const_udelay) @ 0 <= r0 <= 0x01ffffff
ldr r2, LC0
ldr r2, .LC0
ldr r2, [r2] @ max = 0x0fffffff
mov r0, r0, lsr #11 @ max = 0x00003fff
mov r2, r2, lsr #11 @ max = 0x0003ffff
......
arch/arm/lib/findbit.S
View file @ 9cf93d7b
......@@ -27,7 +27,7 @@ ENTRY(_find_first_zero_bit_le)
mov r2, #0
1: ldrb r3, [r0, r2, lsr #3]
eors r3, r3, #0xff @ invert bits
bne .found @ any now set - found zero bit
bne .L_found @ any now set - found zero bit
add r2, r2, #8 @ next bit pointer
2: cmp r2, r1 @ any more?
blo 1b
......@@ -46,7 +46,7 @@ ENTRY(_find_next_zero_bit_le)
ldrb r3, [r0, r2, lsr #3]
eor r3, r3, #0xff @ now looking for a 1 bit
movs r3, r3, lsr ip @ shift off unused bits
bne .found
bne .L_found
orr r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
......@@ -61,7 +61,7 @@ ENTRY(_find_first_bit_le)
mov r2, #0
1: ldrb r3, [r0, r2, lsr #3]
movs r3, r3
bne .found @ any now set - found zero bit
bne .L_found @ any now set - found zero bit
add r2, r2, #8 @ next bit pointer
2: cmp r2, r1 @ any more?
blo 1b
......@@ -79,7 +79,7 @@ ENTRY(_find_next_bit_le)
beq 1b @ If new byte, goto old routine
ldrb r3, [r0, r2, lsr #3]
movs r3, r3, lsr ip @ shift off unused bits
bne .found
bne .L_found
orr r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
......@@ -93,7 +93,7 @@ ENTRY(_find_first_zero_bit_be)
1: eor r3, r2, #0x18 @ big endian byte ordering
ldrb r3, [r0, r3, lsr #3]
eors r3, r3, #0xff @ invert bits
bne .found @ any now set - found zero bit
bne .L_found @ any now set - found zero bit
add r2, r2, #8 @ next bit pointer
2: cmp r2, r1 @ any more?
blo 1b
......@@ -109,7 +109,7 @@ ENTRY(_find_next_zero_bit_be)
ldrb r3, [r0, r3, lsr #3]
eor r3, r3, #0xff @ now looking for a 1 bit
movs r3, r3, lsr ip @ shift off unused bits
bne .found
bne .L_found
orr r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
......@@ -121,7 +121,7 @@ ENTRY(_find_first_bit_be)
1: eor r3, r2, #0x18 @ big endian byte ordering
ldrb r3, [r0, r3, lsr #3]
movs r3, r3
bne .found @ any now set - found zero bit
bne .L_found @ any now set - found zero bit
add r2, r2, #8 @ next bit pointer
2: cmp r2, r1 @ any more?
blo 1b
......@@ -136,7 +136,7 @@ ENTRY(_find_next_bit_be)
eor r3, r2, #0x18 @ big endian byte ordering
ldrb r3, [r0, r3, lsr #3]
movs r3, r3, lsr ip @ shift off unused bits
bne .found
bne .L_found
orr r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
......@@ -146,7 +146,7 @@ ENTRY(_find_next_bit_be)
/*
* One or more bits in the LSB of r3 are assumed to be set.
*/
.found:
.L_found:
#if __LINUX_ARM_ARCH__ >= 5
rsb r1, r3, #0
and r3, r3, r1
......
arch/arm/lib/io-acorn.S
View file @ 9cf93d7b
......@@ -17,7 +17,7 @@
.text
.align
.iosl_warning:
.Liosl_warning:
.ascii "<4>insl/outsl not implemented, called from %08lX\0"
.align
......@@ -27,6 +27,6 @@
*/
ENTRY(insl)
ENTRY(outsl)
adr r0, .iosl_warning
adr r0, .Liosl_warning
mov r1, lr
b printk
arch/arm/lib/io-readsb.S
View file @ 9cf93d7b
......@@ -10,7 +10,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
.insb_align: rsb ip, ip, #4
.Linsb_align: rsb ip, ip, #4
cmp ip, r2
movgt ip, r2
cmp ip, #2
......@@ -21,20 +21,20 @@
ldrgtb r3, [r0]
strgtb r3, [r1], #1
subs r2, r2, ip
bne .insb_aligned
bne .Linsb_aligned
ENTRY(__raw_readsb)
teq r2, #0 @ do we have to check for the zero len?
moveq pc, lr
ands ip, r1, #3
bne .insb_align
bne .Linsb_align
.insb_aligned: stmfd sp!, {r4 - r6, lr}
.Linsb_aligned: stmfd sp!, {r4 - r6, lr}
subs r2, r2, #16
bmi .insb_no_16
bmi .Linsb_no_16
.insb_16_lp: ldrb r3, [r0]
.Linsb_16_lp: ldrb r3, [r0]
ldrb r4, [r0]
ldrb r5, [r0]
mov r3, r3, put_byte_0
......@@ -69,13 +69,13 @@ ENTRY(__raw_readsb)
stmia r1!, {r3 - r6}
subs r2, r2, #16
bpl .insb_16_lp
bpl .Linsb_16_lp
tst r2, #15
LOADREGS(eqfd, sp!, {r4 - r6, pc})
.insb_no_16: tst r2, #8
beq .insb_no_8
.Linsb_no_16: tst r2, #8
beq .Linsb_no_8
ldrb r3, [r0]
ldrb r4, [r0]
......@@ -95,8 +95,8 @@ ENTRY(__raw_readsb)
orr r4, r4, ip, put_byte_3
stmia r1!, {r3, r4}
.insb_no_8: tst r2, #4
beq .insb_no_4
.Linsb_no_8: tst r2, #4
beq .Linsb_no_4
ldrb r3, [r0]
ldrb r4, [r0]
......@@ -108,7 +108,7 @@ ENTRY(__raw_readsb)
orr r3, r3, r6, put_byte_3
str r3, [r1], #4
.insb_no_4: ands r2, r2, #3
.Linsb_no_4: ands r2, r2, #3
LOADREGS(eqfd, sp!, {r4 - r6, pc})
cmp r2, #2
......
arch/arm/lib/io-readsw-armv3.S
View file @ 9cf93d7b
......@@ -11,16 +11,16 @@
#include <asm/assembler.h>
#include <asm/hardware.h>
.insw_bad_alignment:
adr r0, .insw_bad_align_msg
.Linsw_bad_alignment:
adr r0, .Linsw_bad_align_msg
mov r2, lr
b panic
.insw_bad_align_msg:
.Linsw_bad_align_msg:
.asciz "insw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
.align
.insw_align: tst r1, #1
bne .insw_bad_alignment
.Linsw_align: tst r1, #1
bne .Linsw_bad_alignment
ldr r3, [r0]
strb r3, [r1], #1
......@@ -34,16 +34,16 @@ ENTRY(__raw_readsw)
teq r2, #0 @ do we have to check for the zero len?
moveq pc, lr
tst r1, #3
bne .insw_align
bne .Linsw_align
.insw_aligned: mov ip, #0xff
.Linsw_aligned: mov ip, #0xff
orr ip, ip, ip, lsl #8
stmfd sp!, {r4, r5, r6, lr}
subs r2, r2, #8
bmi .no_insw_8
bmi .Lno_insw_8
.insw_8_lp: ldr r3, [r0]
.Linsw_8_lp: ldr r3, [r0]
and r3, r3, ip
ldr r4, [r0]
orr r3, r3, r4, lsl #16
......@@ -66,13 +66,13 @@ ENTRY(__raw_readsw)
stmia r1!, {r3 - r6}
subs r2, r2, #8
bpl .insw_8_lp
bpl .Linsw_8_lp
tst r2, #7
LOADREGS(eqfd, sp!, {r4, r5, r6, pc})
.no_insw_8: tst r2, #4
beq .no_insw_4
.Lno_insw_8: tst r2, #4
beq .Lno_insw_4
ldr r3, [r0]
and r3, r3, ip
......@@ -86,8 +86,8 @@ ENTRY(__raw_readsw)
stmia r1!, {r3, r4}
.no_insw_4: tst r2, #2
beq .no_insw_2
.Lno_insw_4: tst r2, #2
beq .Lno_insw_2
ldr r3, [r0]
and r3, r3, ip
......@@ -96,7 +96,7 @@ ENTRY(__raw_readsw)
str r3, [r1], #4
.no_insw_2: tst r2, #1
.Lno_insw_2: tst r2, #1
ldrne r3, [r0]
strneb r3, [r1], #1
movne r3, r3, lsr #8
......
arch/arm/lib/io-readsw-armv4.S
View file @ 9cf93d7b
......@@ -18,8 +18,8 @@
#endif
.endm
.insw_align: movs ip, r1, lsl #31
bne .insw_noalign
.Linsw_align: movs ip, r1, lsl #31
bne .Linsw_noalign
ldrh ip, [r0]
sub r2, r2, #1
strh ip, [r1], #2
......@@ -28,14 +28,14 @@ ENTRY(__raw_readsw)
teq r2, #0
moveq pc, lr
tst r1, #3
bne .insw_align
bne .Linsw_align
stmfd sp!, {r4, r5, lr}
subs r2, r2, #8
bmi .no_insw_8
bmi .Lno_insw_8
.insw_8_lp: ldrh r3, [r0]
.Linsw_8_lp: ldrh r3, [r0]
ldrh r4, [r0]
pack r3, r3, r4
......@@ -53,10 +53,10 @@ ENTRY(__raw_readsw)
subs r2, r2, #8
stmia r1!, {r3 - r5, ip}
bpl .insw_8_lp
bpl .Linsw_8_lp
.no_insw_8: tst r2, #4
beq .no_insw_4
.Lno_insw_8: tst r2, #4
beq .Lno_insw_4
ldrh r3, [r0]
ldrh r4, [r0]
......@@ -68,15 +68,15 @@ ENTRY(__raw_readsw)
stmia r1!, {r3, r4}
.no_insw_4: movs r2, r2, lsl #31
bcc .no_insw_2
.Lno_insw_4: movs r2, r2, lsl #31
bcc .Lno_insw_2
ldrh r3, [r0]
ldrh ip, [r0]
pack r3, r3, ip
str r3, [r1], #4
.no_insw_2: ldrneh r3, [r0]
.Lno_insw_2: ldrneh r3, [r0]
strneh r3, [r1]
ldmfd sp!, {r4, r5, pc}
......@@ -93,7 +93,7 @@ ENTRY(__raw_readsw)
#define pull_hbyte1 lsr #8
#endif
.insw_noalign: stmfd sp!, {r4, lr}
.Linsw_noalign: stmfd sp!, {r4, lr}
ldrccb ip, [r1, #-1]!
bcc 1f
......
arch/arm/lib/io-writesb.S
View file @ 9cf93d7b
......@@ -30,7 +30,7 @@
#endif
.endm
.outsb_align: rsb ip, ip, #4
.Loutsb_align: rsb ip, ip, #4
cmp ip, r2
movgt ip, r2
cmp ip, #2
......@@ -41,44 +41,45 @@
ldrgtb r3, [r1], #1
strgtb r3, [r0]
subs r2, r2, ip
bne .outsb_aligned
bne .Loutsb_aligned
ENTRY(__raw_writesb)
teq r2, #0 @ do we have to check for the zero len?
moveq pc, lr
ands ip, r1, #3
bne .outsb_align
bne .Loutsb_align
.outsb_aligned: stmfd sp!, {r4, r5, lr}
.Loutsb_aligned:
stmfd sp!, {r4, r5, lr}
subs r2, r2, #16
bmi .outsb_no_16
bmi .Loutsb_no_16
.outsb_16_lp: ldmia r1!, {r3, r4, r5, ip}
.Loutsb_16_lp: ldmia r1!, {r3, r4, r5, ip}
outword r3
outword r4
outword r5
outword ip
subs r2, r2, #16
bpl .outsb_16_lp
bpl .Loutsb_16_lp
tst r2, #15
LOADREGS(eqfd, sp!, {r4, r5, pc})
.outsb_no_16: tst r2, #8
beq .outsb_no_8
.Loutsb_no_16: tst r2, #8
beq .Loutsb_no_8
ldmia r1!, {r3, r4}
outword r3
outword r4
.outsb_no_8: tst r2, #4
beq .outsb_no_4
.Loutsb_no_8: tst r2, #4
beq .Loutsb_no_4
ldr r3, [r1], #4
outword r3
.outsb_no_4: ands r2, r2, #3
.Loutsb_no_4: ands r2, r2, #3
LOADREGS(eqfd, sp!, {r4, r5, pc})
cmp r2, #2
......
arch/arm/lib/io-writesw-armv3.S
View file @ 9cf93d7b
......@@ -11,16 +11,16 @@
#include <asm/assembler.h>
#include <asm/hardware.h>
.outsw_bad_alignment:
adr r0, .outsw_bad_align_msg
.Loutsw_bad_alignment:
adr r0, .Loutsw_bad_align_msg
mov r2, lr
b panic
.outsw_bad_align_msg:
.Loutsw_bad_align_msg:
.asciz "outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
.align
.outsw_align: tst r1, #1
bne .outsw_bad_alignment
.Loutsw_align: tst r1, #1
bne .Loutsw_bad_alignment
add r1, r1, #2
......@@ -35,14 +35,14 @@ ENTRY(__raw_writesw)
teq r2, #0 @ do we have to check for the zero len?
moveq pc, lr
tst r1, #3
bne .outsw_align
bne .Loutsw_align
.outsw_aligned: stmfd sp!, {r4, r5, r6, lr}
stmfd sp!, {r4, r5, r6, lr}
subs r2, r2, #8
bmi .no_outsw_8
bmi .Lno_outsw_8
.outsw_8_lp: ldmia r1!, {r3, r4, r5, r6}
.Loutsw_8_lp: ldmia r1!, {r3, r4, r5, r6}
mov ip, r3, lsl #16
orr ip, ip, ip, lsr #16
......@@ -77,13 +77,13 @@ ENTRY(__raw_writesw)
str ip, [r0]
subs r2, r2, #8
bpl .outsw_8_lp
bpl .Loutsw_8_lp
tst r2, #7
LOADREGS(eqfd, sp!, {r4, r5, r6, pc})
.no_outsw_8: tst r2, #4
beq .no_outsw_4
.Lno_outsw_8: tst r2, #4
beq .Lno_outsw_4
ldmia r1!, {r3, r4}
......@@ -103,8 +103,8 @@ ENTRY(__raw_writesw)
orr ip, ip, ip, lsl #16
str ip, [r0]
.no_outsw_4: tst r2, #2
beq .no_outsw_2
.Lno_outsw_4: tst r2, #2
beq .Lno_outsw_2
ldr r3, [r1], #4
......@@ -116,7 +116,7 @@ ENTRY(__raw_writesw)
orr ip, ip, ip, lsl #16
str ip, [r0]
.no_outsw_2: tst r2, #1
.Lno_outsw_2: tst r2, #1
ldrne r3, [r1]
......
arch/arm/lib/io-writesw-armv4.S
View file @ 9cf93d7b
......@@ -22,8 +22,8 @@
#endif
.endm
.outsw_align: movs ip, r1, lsl #31
bne .outsw_noalign
.Loutsw_align: movs ip, r1, lsl #31
bne .Loutsw_noalign
ldrh r3, [r1], #2
sub r2, r2, #1
......@@ -33,35 +33,35 @@ ENTRY(__raw_writesw)
teq r2, #0
moveq pc, lr
ands r3, r1, #3
bne .outsw_align
bne .Loutsw_align
stmfd sp!, {r4, r5, lr}
subs r2, r2, #8
bmi .no_outsw_8
bmi .Lno_outsw_8
.outsw_8_lp: ldmia r1!, {r3, r4, r5, ip}
.Loutsw_8_lp: ldmia r1!, {r3, r4, r5, ip}
subs r2, r2, #8
outword r3
outword r4
outword r5
outword ip
bpl .outsw_8_lp
bpl .Loutsw_8_lp
.no_outsw_8: tst r2, #4
beq .no_outsw_4
.Lno_outsw_8: tst r2, #4
beq .Lno_outsw_4
ldmia r1!, {r3, ip}
outword r3
outword ip
.no_outsw_4: movs r2, r2, lsl #31
bcc .no_outsw_2
.Lno_outsw_4: movs r2, r2, lsl #31
bcc .Lno_outsw_2
ldr r3, [r1], #4
outword r3
.no_outsw_2: ldrneh r3, [r1]
.Lno_outsw_2: ldrneh r3, [r1]
strneh r3, [r0]
ldmfd sp!, {r4, r5, pc}
......@@ -74,7 +74,8 @@ ENTRY(__raw_writesw)
#define push_hbyte1 lsl #8
#endif
.outsw_noalign: ldr r3, [r1, -r3]!
.Loutsw_noalign:
ldr r3, [r1, -r3]!
subcs r2, r2, #1
bcs 2f
subs r2, r2, #2
......
arch/arm/lib/uaccess.S
View file @ 9cf93d7b
......@@ -27,7 +27,7 @@
* Returns : Number of bytes NOT copied.
*/
.c2u_dest_not_aligned:
.Lc2u_dest_not_aligned:
rsb ip, ip, #4
cmp ip, #2
ldrb r3, [r1], #1
......@@ -37,32 +37,32 @@ USER( strgebt r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #1
USER( strgtbt r3, [r0], #1) @ May fault
sub r2, r2, ip
b .c2u_dest_aligned
b .Lc2u_dest_aligned
ENTRY(__arch_copy_to_user)
stmfd sp!, {r2, r4 - r7, lr}
cmp r2, #4
blt .c2u_not_enough
blt .Lc2u_not_enough
ands ip, r0, #3
bne .c2u_dest_not_aligned
.c2u_dest_aligned:
bne .Lc2u_dest_not_aligned
.Lc2u_dest_aligned:
ands ip, r1, #3
bne .c2u_src_not_aligned
bne .Lc2u_src_not_aligned
/*
* Seeing as there has to be at least 8 bytes to copy, we can
* copy one word, and force a user-mode page fault...
*/
.c2u_0fupi: subs r2, r2, #4
.Lc2u_0fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .c2u_0nowords
bmi .Lc2u_0nowords
ldr r3, [r1], #4
USER( strt r3, [r0], #4) @ May fault
mov ip, r0, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
beq .c2u_0fupi
beq .Lc2u_0fupi
/*
* ip = max no. of bytes to copy before needing another "strt" insn
*/
......@@ -70,16 +70,16 @@ USER( strt r3, [r0], #4) @ May fault
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #32
blt .c2u_0rem8lp
blt .Lc2u_0rem8lp
.c2u_0cpy8lp: ldmia r1!, {r3 - r6}
.Lc2u_0cpy8lp: ldmia r1!, {r3 - r6}
stmia r0!, {r3 - r6} @ Shouldnt fault
ldmia r1!, {r3 - r6}
subs ip, ip, #32
stmia r0!, {r3 - r6} @ Shouldnt fault
bpl .c2u_0cpy8lp
bpl .Lc2u_0cpy8lp
.c2u_0rem8lp: cmn ip, #16
.Lc2u_0rem8lp: cmn ip, #16
ldmgeia r1!, {r3 - r6}
stmgeia r0!, {r3 - r6} @ Shouldnt fault
tst ip, #8
......@@ -89,33 +89,33 @@ USER( strt r3, [r0], #4) @ May fault
ldrne r3, [r1], #4
strnet r3, [r0], #4 @ Shouldnt fault
ands ip, ip, #3
beq .c2u_0fupi
.c2u_0nowords: teq ip, #0
beq .c2u_finished
.c2u_nowords: cmp ip, #2
beq .Lc2u_0fupi
.Lc2u_0nowords: teq ip, #0
beq .Lc2u_finished
.Lc2u_nowords: cmp ip, #2
ldrb r3, [r1], #1
USER( strbt r3, [r0], #1) @ May fault
ldrgeb r3, [r1], #1
USER( strgebt r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #1
USER( strgtbt r3, [r0], #1) @ May fault
b .c2u_finished
b .Lc2u_finished
.c2u_not_enough:
.Lc2u_not_enough:
movs ip, r2
bne .c2u_nowords
.c2u_finished: mov r0, #0
bne .Lc2u_nowords
.Lc2u_finished: mov r0, #0
LOADREGS(fd,sp!,{r2, r4 - r7, pc})
.c2u_src_not_aligned:
.Lc2u_src_not_aligned:
bic r1, r1, #3
ldr r7, [r1], #4
cmp ip, #2
bgt .c2u_3fupi
beq .c2u_2fupi
.c2u_1fupi: subs r2, r2, #4
bgt .Lc2u_3fupi
beq .Lc2u_2fupi
.Lc2u_1fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .c2u_1nowords
bmi .Lc2u_1nowords
mov r3, r7, pull #8
ldr r7, [r1], #4
orr r3, r3, r7, push #24
......@@ -123,14 +123,14 @@ USER( strt r3, [r0], #4) @ May fault
mov ip, r0, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
beq .c2u_1fupi
beq .Lc2u_1fupi
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #16
blt .c2u_1rem8lp
blt .Lc2u_1rem8lp
.c2u_1cpy8lp: mov r3, r7, pull #8
.Lc2u_1cpy8lp: mov r3, r7, pull #8
ldmia r1!, {r4 - r7}
subs ip, ip, #16
orr r3, r3, r4, push #24
......@@ -141,9 +141,9 @@ USER( strt r3, [r0], #4) @ May fault
mov r6, r6, pull #8
orr r6, r6, r7, push #24
stmia r0!, {r3 - r6} @ Shouldnt fault
bpl .c2u_1cpy8lp
bpl .Lc2u_1cpy8lp
.c2u_1rem8lp: tst ip, #8
.Lc2u_1rem8lp: tst ip, #8
movne r3, r7, pull #8
ldmneia r1!, {r4, r7}
orrne r3, r3, r4, push #24
......@@ -156,21 +156,21 @@ USER( strt r3, [r0], #4) @ May fault
orrne r3, r3, r7, push #24
strnet r3, [r0], #4 @ Shouldnt fault
ands ip, ip, #3
beq .c2u_1fupi
.c2u_1nowords: mov r3, r7, get_byte_1
beq .Lc2u_1fupi
.Lc2u_1nowords: mov r3, r7, get_byte_1
teq ip, #0
beq .c2u_finished
beq .Lc2u_finished
cmp ip, #2
USER( strbt r3, [r0], #1) @ May fault
movge r3, r7, get_byte_2
USER( strgebt r3, [r0], #1) @ May fault
movgt r3, r7, get_byte_3
USER( strgtbt r3, [r0], #1) @ May fault
b .c2u_finished
b .Lc2u_finished
.c2u_2fupi: subs r2, r2, #4
.Lc2u_2fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .c2u_2nowords
bmi .Lc2u_2nowords
mov r3, r7, pull #16
ldr r7, [r1], #4
orr r3, r3, r7, push #16
......@@ -178,14 +178,14 @@ USER( strt r3, [r0], #4) @ May fault
mov ip, r0, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
beq .c2u_2fupi
beq .Lc2u_2fupi
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #16
blt .c2u_2rem8lp
blt .Lc2u_2rem8lp
.c2u_2cpy8lp: mov r3, r7, pull #16
.Lc2u_2cpy8lp: mov r3, r7, pull #16
ldmia r1!, {r4 - r7}
subs ip, ip, #16
orr r3, r3, r4, push #16
......@@ -196,9 +196,9 @@ USER( strt r3, [r0], #4) @ May fault
mov r6, r6, pull #16
orr r6, r6, r7, push #16
stmia r0!, {r3 - r6} @ Shouldnt fault
bpl .c2u_2cpy8lp
bpl .Lc2u_2cpy8lp
.c2u_2rem8lp: tst ip, #8
.Lc2u_2rem8lp: tst ip, #8
movne r3, r7, pull #16
ldmneia r1!, {r4, r7}
orrne r3, r3, r4, push #16
......@@ -211,21 +211,21 @@ USER( strt r3, [r0], #4) @ May fault
orrne r3, r3, r7, push #16
strnet r3, [r0], #4 @ Shouldnt fault
ands ip, ip, #3
beq .c2u_2fupi
.c2u_2nowords: mov r3, r7, get_byte_2
beq .Lc2u_2fupi
.Lc2u_2nowords: mov r3, r7, get_byte_2
teq ip, #0
beq .c2u_finished
beq .Lc2u_finished
cmp ip, #2
USER( strbt r3, [r0], #1) @ May fault
movge r3, r7, get_byte_3
USER( strgebt r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #0
USER( strgtbt r3, [r0], #1) @ May fault
b .c2u_finished
b .Lc2u_finished
.c2u_3fupi: subs r2, r2, #4
.Lc2u_3fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .c2u_3nowords
bmi .Lc2u_3nowords
mov r3, r7, pull #24
ldr r7, [r1], #4
orr r3, r3, r7, push #8
......@@ -233,14 +233,14 @@ USER( strt r3, [r0], #4) @ May fault
mov ip, r0, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
beq .c2u_3fupi
beq .Lc2u_3fupi
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #16
blt .c2u_3rem8lp
blt .Lc2u_3rem8lp
.c2u_3cpy8lp: mov r3, r7, pull #24
.Lc2u_3cpy8lp: mov r3, r7, pull #24
ldmia r1!, {r4 - r7}
subs ip, ip, #16
orr r3, r3, r4, push #8
......@@ -251,9 +251,9 @@ USER( strt r3, [r0], #4) @ May fault
mov r6, r6, pull #24
orr r6, r6, r7, push #8
stmia r0!, {r3 - r6} @ Shouldnt fault
bpl .c2u_3cpy8lp
bpl .Lc2u_3cpy8lp
.c2u_3rem8lp: tst ip, #8
.Lc2u_3rem8lp: tst ip, #8
movne r3, r7, pull #24
ldmneia r1!, {r4, r7}
orrne r3, r3, r4, push #8
......@@ -266,17 +266,17 @@ USER( strt r3, [r0], #4) @ May fault
orrne r3, r3, r7, push #8
strnet r3, [r0], #4 @ Shouldnt fault
ands ip, ip, #3
beq .c2u_3fupi
.c2u_3nowords: mov r3, r7, get_byte_3
beq .Lc2u_3fupi
.Lc2u_3nowords: mov r3, r7, get_byte_3
teq ip, #0
beq .c2u_finished
beq .Lc2u_finished
cmp ip, #2
USER( strbt r3, [r0], #1) @ May fault
ldrgeb r3, [r1], #1
USER( strgebt r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #0
USER( strgtbt r3, [r0], #1) @ May fault
b .c2u_finished
b .Lc2u_finished
.section .fixup,"ax"
.align 0
......@@ -290,7 +290,7 @@ USER( strgtbt r3, [r0], #1) @ May fault
* : n - number of bytes to copy
* Returns : Number of bytes NOT copied.
*/
.cfu_dest_not_aligned:
.Lcfu_dest_not_aligned:
rsb ip, ip, #4
cmp ip, #2
USER( ldrbt r3, [r1], #1) @ May fault
......@@ -300,31 +300,32 @@ USER( ldrgebt r3, [r1], #1) @ May fault
USER( ldrgtbt r3, [r1], #1) @ May fault
strgtb r3, [r0], #1
sub r2, r2, ip
b .cfu_dest_aligned
b .Lcfu_dest_aligned
ENTRY(__arch_copy_from_user)
stmfd sp!, {r0, r2, r4 - r7, lr}
cmp r2, #4
blt .cfu_not_enough
blt .Lcfu_not_enough
ands ip, r0, #3
bne .cfu_dest_not_aligned
.cfu_dest_aligned:
bne .Lcfu_dest_not_aligned
.Lcfu_dest_aligned:
ands ip, r1, #3
bne .cfu_src_not_aligned
bne .Lcfu_src_not_aligned
/*
* Seeing as there has to be at least 8 bytes to copy, we can
* copy one word, and force a user-mode page fault...
*/
.cfu_0fupi: subs r2, r2, #4
.Lcfu_0fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .cfu_0nowords
bmi .Lcfu_0nowords
USER( ldrt r3, [r1], #4)
str r3, [r0], #4
mov ip, r1, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
beq .cfu_0fupi
beq .Lcfu_0fupi
/*
* ip = max no. of bytes to copy before needing another "strt" insn
*/
......@@ -332,16 +333,16 @@ USER( ldrt r3, [r1], #4)
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #32
blt .cfu_0rem8lp
blt .Lcfu_0rem8lp
.cfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault
.Lcfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault
stmia r0!, {r3 - r6}
ldmia r1!, {r3 - r6} @ Shouldnt fault
subs ip, ip, #32
stmia r0!, {r3 - r6}
bpl .cfu_0cpy8lp
bpl .Lcfu_0cpy8lp
.cfu_0rem8lp: cmn ip, #16
.Lcfu_0rem8lp: cmn ip, #16
ldmgeia r1!, {r3 - r6} @ Shouldnt fault
stmgeia r0!, {r3 - r6}
tst ip, #8
......@@ -351,34 +352,34 @@ USER( ldrt r3, [r1], #4)
ldrnet r3, [r1], #4 @ Shouldnt fault
strne r3, [r0], #4
ands ip, ip, #3
beq .cfu_0fupi
.cfu_0nowords: teq ip, #0
beq .cfu_finished
.cfu_nowords: cmp ip, #2
beq .Lcfu_0fupi
.Lcfu_0nowords: teq ip, #0
beq .Lcfu_finished
.Lcfu_nowords: cmp ip, #2
USER( ldrbt r3, [r1], #1) @ May fault
strb r3, [r0], #1
USER( ldrgebt r3, [r1], #1) @ May fault
strgeb r3, [r0], #1
USER( ldrgtbt r3, [r1], #1) @ May fault
strgtb r3, [r0], #1
b .cfu_finished
b .Lcfu_finished
.cfu_not_enough:
.Lcfu_not_enough:
movs ip, r2
bne .cfu_nowords
.cfu_finished: mov r0, #0
bne .Lcfu_nowords
.Lcfu_finished: mov r0, #0
add sp, sp, #8
LOADREGS(fd,sp!,{r4 - r7, pc})
.cfu_src_not_aligned:
.Lcfu_src_not_aligned:
bic r1, r1, #3
USER( ldrt r7, [r1], #4) @ May fault
cmp ip, #2
bgt .cfu_3fupi
beq .cfu_2fupi
.cfu_1fupi: subs r2, r2, #4
bgt .Lcfu_3fupi
beq .Lcfu_2fupi
.Lcfu_1fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .cfu_1nowords
bmi .Lcfu_1nowords
mov r3, r7, pull #8
USER( ldrt r7, [r1], #4) @ May fault
orr r3, r3, r7, push #24
......@@ -386,14 +387,14 @@ USER( ldrt r7, [r1], #4) @ May fault
mov ip, r1, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
beq .cfu_1fupi
beq .Lcfu_1fupi
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #16
blt .cfu_1rem8lp
blt .Lcfu_1rem8lp
.cfu_1cpy8lp: mov r3, r7, pull #8
.Lcfu_1cpy8lp: mov r3, r7, pull #8
ldmia r1!, {r4 - r7} @ Shouldnt fault
subs ip, ip, #16
orr r3, r3, r4, push #24
......@@ -404,9 +405,9 @@ USER( ldrt r7, [r1], #4) @ May fault
mov r6, r6, pull #8
orr r6, r6, r7, push #24
stmia r0!, {r3 - r6}
bpl .cfu_1cpy8lp
bpl .Lcfu_1cpy8lp
.cfu_1rem8lp: tst ip, #8
.Lcfu_1rem8lp: tst ip, #8
movne r3, r7, pull #8
ldmneia r1!, {r4, r7} @ Shouldnt fault
orrne r3, r3, r4, push #24
......@@ -419,21 +420,21 @@ USER( ldrnet r7, [r1], #4) @ May fault
orrne r3, r3, r7, push #24
strne r3, [r0], #4
ands ip, ip, #3
beq .cfu_1fupi
.cfu_1nowords: mov r3, r7, get_byte_1
beq .Lcfu_1fupi
.Lcfu_1nowords: mov r3, r7, get_byte_1
teq ip, #0
beq .cfu_finished
beq .Lcfu_finished
cmp ip, #2
strb r3, [r0], #1
movge r3, r7, get_byte_2
strgeb r3, [r0], #1
movgt r3, r7, get_byte_3
strgtb r3, [r0], #1
b .cfu_finished
b .Lcfu_finished
.cfu_2fupi: subs r2, r2, #4
.Lcfu_2fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .cfu_2nowords
bmi .Lcfu_2nowords
mov r3, r7, pull #16
USER( ldrt r7, [r1], #4) @ May fault
orr r3, r3, r7, push #16
......@@ -441,14 +442,15 @@ USER( ldrt r7, [r1], #4) @ May fault
mov ip, r1, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
beq .cfu_2fupi
beq .Lcfu_2fupi
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #16
blt .cfu_2rem8lp
blt .Lcfu_2rem8lp
.cfu_2cpy8lp: mov r3, r7, pull #16
.Lcfu_2cpy8lp: mov r3, r7, pull #16
ldmia r1!, {r4 - r7} @ Shouldnt fault
subs ip, ip, #16
orr r3, r3, r4, push #16
......@@ -459,9 +461,9 @@ USER( ldrt r7, [r1], #4) @ May fault
mov r6, r6, pull #16
orr r6, r6, r7, push #16
stmia r0!, {r3 - r6}
bpl .cfu_2cpy8lp
bpl .Lcfu_2cpy8lp
.cfu_2rem8lp: tst ip, #8
.Lcfu_2rem8lp: tst ip, #8
movne r3, r7, pull #16
ldmneia r1!, {r4, r7} @ Shouldnt fault
orrne r3, r3, r4, push #16
......@@ -474,21 +476,21 @@ USER( ldrnet r7, [r1], #4) @ May fault
orrne r3, r3, r7, push #16
strne r3, [r0], #4
ands ip, ip, #3
beq .cfu_2fupi
.cfu_2nowords: mov r3, r7, get_byte_2
beq .Lcfu_2fupi
.Lcfu_2nowords: mov r3, r7, get_byte_2
teq ip, #0
beq .cfu_finished
beq .Lcfu_finished
cmp ip, #2
strb r3, [r0], #1
movge r3, r7, get_byte_3
strgeb r3, [r0], #1
USER( ldrgtbt r3, [r1], #0) @ May fault
strgtb r3, [r0], #1
b .cfu_finished
b .Lcfu_finished
.cfu_3fupi: subs r2, r2, #4
.Lcfu_3fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .cfu_3nowords
bmi .Lcfu_3nowords
mov r3, r7, pull #24
USER( ldrt r7, [r1], #4) @ May fault
orr r3, r3, r7, push #8
......@@ -496,14 +498,14 @@ USER( ldrt r7, [r1], #4) @ May fault
mov ip, r1, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
beq .cfu_3fupi
beq .Lcfu_3fupi
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #16
blt .cfu_3rem8lp
blt .Lcfu_3rem8lp
.cfu_3cpy8lp: mov r3, r7, pull #24
.Lcfu_3cpy8lp: mov r3, r7, pull #24
ldmia r1!, {r4 - r7} @ Shouldnt fault
orr r3, r3, r4, push #8
mov r4, r4, pull #24
......@@ -514,9 +516,9 @@ USER( ldrt r7, [r1], #4) @ May fault
orr r6, r6, r7, push #8
stmia r0!, {r3 - r6}
subs ip, ip, #16
bpl .cfu_3cpy8lp
bpl .Lcfu_3cpy8lp
.cfu_3rem8lp: tst ip, #8
.Lcfu_3rem8lp: tst ip, #8
movne r3, r7, pull #24
ldmneia r1!, {r4, r7} @ Shouldnt fault
orrne r3, r3, r4, push #8
......@@ -529,17 +531,17 @@ USER( ldrnet r7, [r1], #4) @ May fault
orrne r3, r3, r7, push #8
strne r3, [r0], #4
ands ip, ip, #3
beq .cfu_3fupi
.cfu_3nowords: mov r3, r7, get_byte_3
beq .Lcfu_3fupi
.Lcfu_3nowords: mov r3, r7, get_byte_3
teq ip, #0
beq .cfu_finished
beq .Lcfu_finished
cmp ip, #2
strb r3, [r0], #1
USER( ldrgebt r3, [r1], #1) @ May fault
strgeb r3, [r0], #1
USER( ldrgtbt r3, [r1], #1) @ May fault
strgtb r3, [r0], #1
b .cfu_finished
b .Lcfu_finished
.section .fixup,"ax"
.align 0
......
arch/arm/tools/mach-types
View file @ 9cf93d7b
......@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
# Last update: Mon Oct 10 09:46:25 2005
# Last update: Fri Nov 11 21:55:04 2005
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
......@@ -460,7 +460,7 @@ esl_sarva MACH_ESL_SARVA ESL_SARVA 443
xm250 MACH_XM250 XM250 444
t6tc1xb MACH_T6TC1XB T6TC1XB 445
ess710 MACH_ESS710 ESS710 446
mx31ads MACH_MX3ADS MX3ADS 447
mx31ads MACH_MX31ADS MX31ADS 447
himalaya MACH_HIMALAYA HIMALAYA 448
bolfenk MACH_BOLFENK BOLFENK 449
at91rm9200kr MACH_AT91RM9200KR AT91RM9200KR 450
......@@ -802,7 +802,7 @@ cpuat91 MACH_CPUAT91 CPUAT91 787
rea9200 MACH_REA9200 REA9200 788
acts_pune_sa1110 MACH_ACTS_PUNE_SA1110 ACTS_PUNE_SA1110 789
ixp425 MACH_IXP425 IXP425 790
argonplusodyssey MACH_ODYSSEY ODYSSEY 791
argonplusodyssey MACH_ARGONPLUSODYSSEY ARGONPLUSODYSSEY 791
perch MACH_PERCH PERCH 792
eis05r1 MACH_EIS05R1 EIS05R1 793
pepperpad MACH_PEPPERPAD PEPPERPAD 794
......@@ -816,7 +816,7 @@ iq_nextgen_c MACH_IQ_NEXTGEN_C IQ_NEXTGEN_C 801
iq_nextgen_d MACH_IQ_NEXTGEN_D IQ_NEXTGEN_D 802
iq_nextgen_e MACH_IQ_NEXTGEN_E IQ_NEXTGEN_E 803
mallow_at91 MACH_MALLOW_AT91 MALLOW_AT91 804
cybertracker MACH_CYBERTRACKER CYBERTRACKER 805
cybertracker_i MACH_CYBERTRACKER_I CYBERTRACKER_I 805
gesbc931x MACH_GESBC931X GESBC931X 806
centipad MACH_CENTIPAD CENTIPAD 807
armsoc MACH_ARMSOC ARMSOC 808
......@@ -869,3 +869,38 @@ davinci_dvdp MACH_DAVINCI_DVDP DAVINCI_DVDP 854
htcuniversal MACH_HTCUNIVERSAL HTCUNIVERSAL 855
tpad MACH_TPAD TPAD 856
roverp3 MACH_ROVERP3 ROVERP3 857
jornada928 MACH_JORNADA928 JORNADA928 858
mv88fxx81 MACH_MV88FXX81 MV88FXX81 859
stmp36xx MACH_STMP36XX STMP36XX 860
sxni79524 MACH_SXNI79524 SXNI79524 861
ams_delta MACH_AMS_DELTA AMS_DELTA 862
uranium MACH_URANIUM URANIUM 863
ucon MACH_UCON UCON 864
nas100d MACH_NAS100D NAS100D 865
l083 MACH_L083_1000 L083_1000 866
ezx MACH_EZX EZX 867
pnx5220 MACH_PNX5220 PNX5220 868
butte MACH_BUTTE BUTTE 869
srm2 MACH_SRM2 SRM2 870
dsbr MACH_DSBR DSBR 871
crystalball MACH_CRYSTALBALL CRYSTALBALL 872
tinypxa27x MACH_TINYPXA27X TINYPXA27X 873
herbie MACH_HERBIE HERBIE 874
magician MACH_MAGICIAN MAGICIAN 875
cm4002 MACH_CM4002 CM4002 876
b4 MACH_B4 B4 877
maui MACH_MAUI MAUI 878
cybertracker_g MACH_CYBERTRACKER_G CYBERTRACKER_G 879
nxdkn MACH_NXDKN NXDKN 880
mio8390 MACH_MIO8390 MIO8390 881
omi_board MACH_OMI_BOARD OMI_BOARD 882
mx21civ MACH_MX21CIV MX21CIV 883
mahi_cdac MACH_MAHI_CDAC MAHI_CDAC 884
xscale_palmtx MACH_XSCALE_PALMTX XSCALE_PALMTX 885
arch_s3c2413 MACH_ARCH_S3C2413 ARCH_S3C2413 886
s3c2413 MACH_S3C2413 S3C2413 887
samsys_ep0 MACH_SAMSYS_EP0 SAMSYS_EP0 888
wg302v1 MACH_WG302V1 WG302V1 889
wg302v2 MACH_WG302V2 WG302V2 890
eb42x MACH_EB42X EB42X 891
iq331es MACH_IQ331ES IQ331ES 892
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment