[ARM] 3143/1: OMAP 4/5: Update omap include files

Patch from Tony Lindgren

This patch syncs the mainline kernel with linux-omap tree.

This patch contains changes to common header files for
omap1xxx and omap24xx by various omap developers, and
improved cpu detection by Imre Deak
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

include/asm-arm/arch-omap/board-h4.h

@@ -34,5 +34,9 @@
 #define OMAP24XX_ETHR_START             0x08000300
 #define OMAP24XX_ETHR_GPIO_IRQ		92
 
+#define H4_CS0_BASE		     0x04000000
+
+#define H4_CS0_BASE		     0x04000000
+
 #endif /*  __ASM_ARCH_OMAP_H4_H */
 

include/asm-arm/arch-omap/board-innovator.h

@@ -26,7 +26,7 @@
 #ifndef __ASM_ARCH_OMAP_INNOVATOR_H
 #define __ASM_ARCH_OMAP_INNOVATOR_H
 
-#if defined (CONFIG_ARCH_OMAP1510)
+#if defined (CONFIG_ARCH_OMAP15XX)
 
 #ifndef OMAP_SDRAM_DEVICE
 #define OMAP_SDRAM_DEVICE			D256M_1X16_4B
@@ -44,7 +44,7 @@ void fpga_write(unsigned char val, int reg);
 unsigned char fpga_read(int reg);
 #endif
 
-#endif /* CONFIG_ARCH_OMAP1510 */
+#endif /* CONFIG_ARCH_OMAP15XX */
 
 #if defined (CONFIG_ARCH_OMAP16XX)
 

include/asm-arm/arch-omap/clock.h

+/*
+ *  linux/include/asm-arm/arch-omap/clock.h
+ *
+ *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_CLOCK_H
+#define __ARCH_ARM_OMAP_CLOCK_H
+
+struct module;
+
+struct clk {
+	struct list_head	node;
+	struct module		*owner;
+	const char		*name;
+	struct clk		*parent;
+	unsigned long		rate;
+	__u32			flags;
+	void __iomem		*enable_reg;
+	__u8			enable_bit;
+	__u8			rate_offset;
+	__u8			src_offset;
+	__s8			usecount;
+	void			(*recalc)(struct clk *);
+	int			(*set_rate)(struct clk *, unsigned long);
+	long			(*round_rate)(struct clk *, unsigned long);
+	void			(*init)(struct clk *);
+	int			(*enable)(struct clk *);
+	void			(*disable)(struct clk *);
+};
+
+struct clk_functions {
+	int		(*clk_enable)(struct clk *clk);
+	void		(*clk_disable)(struct clk *clk);
+	int		(*clk_use)(struct clk *clk);
+	void		(*clk_unuse)(struct clk *clk);
+	long		(*clk_round_rate)(struct clk *clk, unsigned long rate);
+	int		(*clk_set_rate)(struct clk *clk, unsigned long rate);
+	int		(*clk_set_parent)(struct clk *clk, struct clk *parent);
+	struct clk *	(*clk_get_parent)(struct clk *clk);
+	void		(*clk_allow_idle)(struct clk *clk);
+	void		(*clk_deny_idle)(struct clk *clk);
+};
+
+extern unsigned int mpurate;
+extern struct list_head clocks;
+extern spinlock_t clockfw_lock;
+
+extern int clk_init(struct clk_functions * custom_clocks);
+extern int clk_register(struct clk *clk);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void followparent_recalc(struct clk * clk);
+extern void clk_allow_idle(struct clk *clk);
+extern void clk_deny_idle(struct clk *clk);
+
+/* Clock flags */
+#define RATE_CKCTL		(1 << 0)	/* Main fixed ratio clocks */
+#define RATE_FIXED		(1 << 1)	/* Fixed clock rate */
+#define RATE_PROPAGATES		(1 << 2)	/* Program children too */
+#define VIRTUAL_CLOCK		(1 << 3)	/* Composite clock from table */
+#define ALWAYS_ENABLED		(1 << 4)	/* Clock cannot be disabled */
+#define ENABLE_REG_32BIT	(1 << 5)	/* Use 32-bit access */
+#define VIRTUAL_IO_ADDRESS	(1 << 6)	/* Clock in virtual address */
+#define CLOCK_IDLE_CONTROL	(1 << 7)
+#define CLOCK_NO_IDLE_PARENT	(1 << 8)
+#define DELAYED_APP		(1 << 9)	/* Delay application of clock */
+#define CONFIG_PARTICIPANT	(1 << 10)	/* Fundamental clock */
+#define CM_MPU_SEL1		(1 << 11)	/* Domain divider/source */
+#define CM_DSP_SEL1		(1 << 12)
+#define CM_GFX_SEL1		(1 << 13)
+#define CM_MODEM_SEL1		(1 << 14)
+#define CM_CORE_SEL1		(1 << 15)	/* Sets divider for many */
+#define CM_CORE_SEL2		(1 << 16)	/* sets parent for GPT */
+#define CM_WKUP_SEL1		(1 << 17)
+#define CM_PLL_SEL1		(1 << 18)
+#define CM_PLL_SEL2		(1 << 19)
+#define CM_SYSCLKOUT_SEL1	(1 << 20)
+#define CLOCK_IN_OMAP730	(1 << 21)
+#define CLOCK_IN_OMAP1510	(1 << 22)
+#define CLOCK_IN_OMAP16XX	(1 << 23)
+#define CLOCK_IN_OMAP242X	(1 << 24)
+#define CLOCK_IN_OMAP243X	(1 << 25)
+
+#endif

include/asm-arm/arch-omap/common.h

@@ -31,6 +31,6 @@ struct sys_timer;
 
 extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
-extern void omap_serial_init(int ports[]);
+extern void omap_serial_init(void);
 
 #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */

include/asm-arm/arch-omap/cpu.h

@@ -28,12 +28,7 @@
 
 extern unsigned int system_rev;
 
-#define OMAP_DIE_ID_0		0xfffe1800
-#define OMAP_DIE_ID_1		0xfffe1804
-#define OMAP_PRODUCTION_ID_0	0xfffe2000
-#define OMAP_PRODUCTION_ID_1	0xfffe2004
-#define OMAP32_ID_0		0xfffed400
-#define OMAP32_ID_1		0xfffed404
+#define omap2_cpu_rev()		((system_rev >> 8) & 0x0f)
 
 /*
  * Test if multicore OMAP support is needed
@@ -50,7 +45,7 @@ extern unsigned int system_rev;
 #  define OMAP_NAME omap730
 # endif
 #endif
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 # ifdef OMAP_NAME
 #  undef  MULTI_OMAP1
 #  define MULTI_OMAP1
@@ -79,9 +74,11 @@ extern unsigned int system_rev;
  * Macros to group OMAP into cpu classes.
  * These can be used in most places.
  * cpu_is_omap7xx():	True for OMAP730
- * cpu_is_omap15xx():	True for OMAP1510 and OMAP5910
+ * cpu_is_omap15xx():	True for OMAP1510, OMAP5910 and OMAP310
  * cpu_is_omap16xx():	True for OMAP1610, OMAP5912 and OMAP1710
- * cpu_is_omap24xx():	True for OMAP2420
+ * cpu_is_omap24xx():	True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
+ * cpu_is_omap242x():	True for OMAP2420, OMAP2422, OMAP2423
+ * cpu_is_omap243x():	True for OMAP2430
  */
 #define GET_OMAP_CLASS	(system_rev & 0xff)
 
@@ -91,22 +88,35 @@ static inline int is_omap ##class (void)		\
 	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
 }
 
+#define GET_OMAP_SUBCLASS	((system_rev >> 20) & 0x0fff)
+
+#define IS_OMAP_SUBCLASS(subclass, id)			\
+static inline int is_omap ##subclass (void)		\
+{							\
+	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
+}
+
 IS_OMAP_CLASS(7xx, 0x07)
 IS_OMAP_CLASS(15xx, 0x15)
 IS_OMAP_CLASS(16xx, 0x16)
 IS_OMAP_CLASS(24xx, 0x24)
 
+IS_OMAP_SUBCLASS(242x, 0x242)
+IS_OMAP_SUBCLASS(243x, 0x243)
+
 #define cpu_is_omap7xx()		0
 #define cpu_is_omap15xx()		0
 #define cpu_is_omap16xx()		0
 #define cpu_is_omap24xx()		0
+#define cpu_is_omap242x()		0
+#define cpu_is_omap243x()		0
 
 #if defined(MULTI_OMAP1)
 # if defined(CONFIG_ARCH_OMAP730)
 #  undef  cpu_is_omap7xx
 #  define cpu_is_omap7xx()		is_omap7xx()
 # endif
-# if defined(CONFIG_ARCH_OMAP1510)
+# if defined(CONFIG_ARCH_OMAP15XX)
 #  undef  cpu_is_omap15xx
 #  define cpu_is_omap15xx()		is_omap15xx()
 # endif
@@ -119,7 +129,7 @@ IS_OMAP_CLASS(24xx, 0x24)
 #  undef  cpu_is_omap7xx
 #  define cpu_is_omap7xx()		1
 # endif
-# if defined(CONFIG_ARCH_OMAP1510)
+# if defined(CONFIG_ARCH_OMAP15XX)
 #  undef  cpu_is_omap15xx
 #  define cpu_is_omap15xx()		1
 # endif
@@ -129,13 +139,18 @@ IS_OMAP_CLASS(24xx, 0x24)
 # endif
 # if defined(CONFIG_ARCH_OMAP24XX)
 #  undef  cpu_is_omap24xx
+#  undef  cpu_is_omap242x
+#  undef  cpu_is_omap243x
 #  define cpu_is_omap24xx()		1
+#  define cpu_is_omap242x()		is_omap242x()
+#  define cpu_is_omap243x()		is_omap243x()
 # endif
 #endif
 
 /*
  * Macros to detect individual cpu types.
  * These are only rarely needed.
+ * cpu_is_omap330():	True for OMAP330
  * cpu_is_omap730():	True for OMAP730
  * cpu_is_omap1510():	True for OMAP1510
  * cpu_is_omap1610():	True for OMAP1610
@@ -144,6 +159,9 @@ IS_OMAP_CLASS(24xx, 0x24)
  * cpu_is_omap1621():	True for OMAP1621
  * cpu_is_omap1710():	True for OMAP1710
  * cpu_is_omap2420():	True for OMAP2420
+ * cpu_is_omap2422():	True for OMAP2422
+ * cpu_is_omap2423():	True for OMAP2423
+ * cpu_is_omap2430():	True for OMAP2430
  */
 #define GET_OMAP_TYPE	((system_rev >> 16) & 0xffff)
 
@@ -153,6 +171,7 @@ static inline int is_omap ##type (void)			\
 	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
 }
 
+IS_OMAP_TYPE(310, 0x0310)
 IS_OMAP_TYPE(730, 0x0730)
 IS_OMAP_TYPE(1510, 0x1510)
 IS_OMAP_TYPE(1610, 0x1610)
@@ -161,7 +180,11 @@ IS_OMAP_TYPE(5912, 0x1611)
 IS_OMAP_TYPE(1621, 0x1621)
 IS_OMAP_TYPE(1710, 0x1710)
 IS_OMAP_TYPE(2420, 0x2420)
+IS_OMAP_TYPE(2422, 0x2422)
+IS_OMAP_TYPE(2423, 0x2423)
+IS_OMAP_TYPE(2430, 0x2430)
 
+#define cpu_is_omap310()		0
 #define cpu_is_omap730()		0
 #define cpu_is_omap1510()		0
 #define cpu_is_omap1610()		0
@@ -170,31 +193,33 @@ IS_OMAP_TYPE(2420, 0x2420)
 #define cpu_is_omap1621()		0
 #define cpu_is_omap1710()		0
 #define cpu_is_omap2420()		0
+#define cpu_is_omap2422()		0
+#define cpu_is_omap2423()		0
+#define cpu_is_omap2430()		0
 
 #if defined(MULTI_OMAP1)
 # if defined(CONFIG_ARCH_OMAP730)
 #  undef  cpu_is_omap730
 #  define cpu_is_omap730()		is_omap730()
 # endif
-# if defined(CONFIG_ARCH_OMAP1510)
-#  undef  cpu_is_omap1510
-#  define cpu_is_omap1510()		is_omap1510()
-# endif
 #else
 # if defined(CONFIG_ARCH_OMAP730)
 #  undef  cpu_is_omap730
 #  define cpu_is_omap730()		1
 # endif
-# if defined(CONFIG_ARCH_OMAP1510)
-#  undef  cpu_is_omap1510
-#  define cpu_is_omap1510()		1
-# endif
 #endif
 
 /*
  * Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 1611B/5912 and 1710.
+ * between 330 vs. 1510 and 1611B/5912 vs. 1710.
  */
+#if defined(CONFIG_ARCH_OMAP15XX)
+# undef  cpu_is_omap310
+# undef  cpu_is_omap1510
+# define cpu_is_omap310()		is_omap310()
+# define cpu_is_omap1510()		is_omap1510()
+#endif
+
 #if defined(CONFIG_ARCH_OMAP16XX)
 # undef  cpu_is_omap1610
 # undef  cpu_is_omap1611
@@ -208,9 +233,20 @@ IS_OMAP_TYPE(2420, 0x2420)
 # define cpu_is_omap1710()		is_omap1710()
 #endif
 
-#if defined(CONFIG_ARCH_OMAP2420)
-#  undef  cpu_is_omap2420
-#  define cpu_is_omap2420()		1
+#if defined(CONFIG_ARCH_OMAP24XX)
+# undef  cpu_is_omap2420
+# undef  cpu_is_omap2422
+# undef  cpu_is_omap2423
+# undef  cpu_is_omap2430
+# define cpu_is_omap2420()		is_omap2420()
+# define cpu_is_omap2422()		is_omap2422()
+# define cpu_is_omap2423()		is_omap2423()
+# define cpu_is_omap2430()		is_omap2430()
 #endif
 
+/* Macros to detect if we have OMAP1 or OMAP2 */
+#define cpu_class_is_omap1()	(cpu_is_omap730() || cpu_is_omap15xx() || \
+				cpu_is_omap16xx())
+#define cpu_class_is_omap2()	cpu_is_omap24xx()
+
 #endif

include/asm-arm/arch-omap/dma.h

@@ -22,9 +22,109 @@
 #define __ASM_ARCH_DMA_H
 
 #define MAX_DMA_ADDRESS			0xffffffff
+#define MAX_DMA_CHANNELS		0
+
+/* Hardware registers for omap1 */
+#define OMAP_DMA_BASE			(0xfffed800)
+#define OMAP_DMA_GCR			(OMAP_DMA_BASE + 0x400)
+#define OMAP_DMA_GSCR			(OMAP_DMA_BASE + 0x404)
+#define OMAP_DMA_GRST			(OMAP_DMA_BASE + 0x408)
+#define OMAP_DMA_HW_ID			(OMAP_DMA_BASE + 0x442)
+#define OMAP_DMA_PCH2_ID		(OMAP_DMA_BASE + 0x444)
+#define OMAP_DMA_PCH0_ID		(OMAP_DMA_BASE + 0x446)
+#define OMAP_DMA_PCH1_ID		(OMAP_DMA_BASE + 0x448)
+#define OMAP_DMA_PCHG_ID		(OMAP_DMA_BASE + 0x44a)
+#define OMAP_DMA_PCHD_ID		(OMAP_DMA_BASE + 0x44c)
+#define OMAP_DMA_CAPS_0_U		(OMAP_DMA_BASE + 0x44e)
+#define OMAP_DMA_CAPS_0_L		(OMAP_DMA_BASE + 0x450)
+#define OMAP_DMA_CAPS_1_U		(OMAP_DMA_BASE + 0x452)
+#define OMAP_DMA_CAPS_1_L		(OMAP_DMA_BASE + 0x454)
+#define OMAP_DMA_CAPS_2			(OMAP_DMA_BASE + 0x456)
+#define OMAP_DMA_CAPS_3			(OMAP_DMA_BASE + 0x458)
+#define OMAP_DMA_CAPS_4			(OMAP_DMA_BASE + 0x45a)
+#define OMAP_DMA_PCH2_SR		(OMAP_DMA_BASE + 0x460)
+#define OMAP_DMA_PCH0_SR		(OMAP_DMA_BASE + 0x480)
+#define OMAP_DMA_PCH1_SR		(OMAP_DMA_BASE + 0x482)
+#define OMAP_DMA_PCHD_SR		(OMAP_DMA_BASE + 0x4c0)
+
+/* Hardware registers for omap2 */
+#define OMAP24XX_DMA_BASE		(L4_24XX_BASE + 0x56000)
+#define OMAP_DMA4_REVISION		(OMAP24XX_DMA_BASE + 0x00)
+#define OMAP_DMA4_GCR_REG		(OMAP24XX_DMA_BASE + 0x78)
+#define OMAP_DMA4_IRQSTATUS_L0		(OMAP24XX_DMA_BASE + 0x08)
+#define OMAP_DMA4_IRQSTATUS_L1		(OMAP24XX_DMA_BASE + 0x0c)
+#define OMAP_DMA4_IRQSTATUS_L2		(OMAP24XX_DMA_BASE + 0x10)
+#define OMAP_DMA4_IRQSTATUS_L3		(OMAP24XX_DMA_BASE + 0x14)
+#define OMAP_DMA4_IRQENABLE_L0		(OMAP24XX_DMA_BASE + 0x18)
+#define OMAP_DMA4_IRQENABLE_L1		(OMAP24XX_DMA_BASE + 0x1c)
+#define OMAP_DMA4_IRQENABLE_L2		(OMAP24XX_DMA_BASE + 0x20)
+#define OMAP_DMA4_IRQENABLE_L3		(OMAP24XX_DMA_BASE + 0x24)
+#define OMAP_DMA4_SYSSTATUS		(OMAP24XX_DMA_BASE + 0x28)
+#define OMAP_DMA4_CAPS_0		(OMAP24XX_DMA_BASE + 0x64)
+#define OMAP_DMA4_CAPS_2		(OMAP24XX_DMA_BASE + 0x6c)
+#define OMAP_DMA4_CAPS_3		(OMAP24XX_DMA_BASE + 0x70)
+#define OMAP_DMA4_CAPS_4		(OMAP24XX_DMA_BASE + 0x74)
+
+#ifdef CONFIG_ARCH_OMAP1
 
 #define OMAP_LOGICAL_DMA_CH_COUNT	17
 
+/* Common channel specific registers for omap1 */
+#define OMAP_DMA_CSDP_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x00)
+#define OMAP_DMA_CCR_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x02)
+#define OMAP_DMA_CICR_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x04)
+#define OMAP_DMA_CSR_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x06)
+#define OMAP_DMA_CEN_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x10)
+#define OMAP_DMA_CFN_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x12)
+#define OMAP_DMA_CSFI_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x14)
+#define OMAP_DMA_CSEI_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x16)
+#define OMAP_DMA_CSAC_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x18)
+#define OMAP_DMA_CDAC_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x1a)
+#define OMAP_DMA_CDEI_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x1c)
+#define OMAP_DMA_CDFI_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x1e)
+#define OMAP_DMA_CLNK_CTRL_REG(n)	__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x28)
+
+#else
+
+#define OMAP_LOGICAL_DMA_CH_COUNT	32	/* REVISIT: Is this 32 + 2? */
+
+/* Common channel specific registers for omap2 */
+#define OMAP_DMA_CCR_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x80)
+#define OMAP_DMA_CLNK_CTRL_REG(n)	__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x84)
+#define OMAP_DMA_CICR_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x88)
+#define OMAP_DMA_CSR_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x8c)
+#define OMAP_DMA_CSDP_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x90)
+#define OMAP_DMA_CEN_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x94)
+#define OMAP_DMA_CFN_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x98)
+#define OMAP_DMA_CSEI_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xa4)
+#define OMAP_DMA_CSFI_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xa8)
+#define OMAP_DMA_CDEI_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xac)
+#define OMAP_DMA_CDFI_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xb0)
+#define OMAP_DMA_CSAC_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xb4)
+#define OMAP_DMA_CDAC_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xb8)
+
+#endif
+
+/* Channel specific registers only on omap1 */
+#define OMAP1_DMA_CSSA_L_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x08)
+#define OMAP1_DMA_CSSA_U_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x0a)
+#define OMAP1_DMA_CDSA_L_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x0c)
+#define OMAP1_DMA_CDSA_U_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x0e)
+#define OMAP1_DMA_COLOR_L_REG(n)	__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x20)
+#define OMAP1_DMA_CCR2_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x24)
+#define OMAP1_DMA_COLOR_U_REG(n)	__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x22)
+#define OMAP1_DMA_LCH_CTRL_REG(n)	__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x2a)
+
+/* Channel specific registers only on omap2 */
+#define OMAP2_DMA_CSSA_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x9c)
+#define OMAP2_DMA_CDSA_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xa0)
+#define OMAP2_DMA_CCEN_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xbc)
+#define OMAP2_DMA_CCFN_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xc0)
+#define OMAP2_DMA_COLOR_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xc4)
+
+/*----------------------------------------------------------------------------*/
+
+/* DMA channels for omap1 */
 #define OMAP_DMA_NO_DEVICE		0
 #define OMAP_DMA_MCSI1_TX		1
 #define OMAP_DMA_MCSI1_RX		2
@@ -85,29 +185,72 @@
 #define OMAP_DMA_MMC2_RX		55
 #define OMAP_DMA_CRYPTO_DES_OUT		56
 
+/* DMA channels for 24xx */
+#define OMAP24XX_DMA_NO_DEVICE		0
+#define OMAP24XX_DMA_XTI_DMA		1	/* S_DMA_0 */
+#define OMAP24XX_DMA_EXT_NDMA_REQ0	2	/* S_DMA_1 */
+#define OMAP24XX_DMA_EXT_NDMA_REQ1	3	/* S_DMA_2 */
+#define OMAP24XX_DMA_GPMC		4	/* S_DMA_3 */
+#define OMAP24XX_DMA_GFX		5	/* S_DMA_4 */
+#define OMAP24XX_DMA_DSS		6	/* S_DMA_5 */
+#define OMAP24XX_DMA_VLYNQ_TX		7	/* S_DMA_6 */
+#define OMAP24XX_DMA_CWT		8	/* S_DMA_7 */
+#define OMAP24XX_DMA_AES_TX		9	/* S_DMA_8 */
+#define OMAP24XX_DMA_AES_RX		10	/* S_DMA_9 */
+#define OMAP24XX_DMA_DES_TX		11	/* S_DMA_10 */
+#define OMAP24XX_DMA_DES_RX		12	/* S_DMA_11 */
+#define OMAP24XX_DMA_SHA1MD5_RX		13	/* S_DMA_12 */
 
-#define OMAP_DMA_BASE			(0xfffed800)
-#define OMAP_DMA_GCR			(OMAP_DMA_BASE + 0x400)
-#define OMAP_DMA_GSCR			(OMAP_DMA_BASE + 0x404)
-#define OMAP_DMA_GRST			(OMAP_DMA_BASE + 0x408)
-#define OMAP_DMA_HW_ID			(OMAP_DMA_BASE + 0x442)
-#define OMAP_DMA_PCH2_ID		(OMAP_DMA_BASE + 0x444)
-#define OMAP_DMA_PCH0_ID		(OMAP_DMA_BASE + 0x446)
-#define OMAP_DMA_PCH1_ID		(OMAP_DMA_BASE + 0x448)
-#define OMAP_DMA_PCHG_ID		(OMAP_DMA_BASE + 0x44a)
-#define OMAP_DMA_PCHD_ID		(OMAP_DMA_BASE + 0x44c)
-#define OMAP_DMA_CAPS_0_U		(OMAP_DMA_BASE + 0x44e)
-#define OMAP_DMA_CAPS_0_L		(OMAP_DMA_BASE + 0x450)
-#define OMAP_DMA_CAPS_1_U		(OMAP_DMA_BASE + 0x452)
-#define OMAP_DMA_CAPS_1_L		(OMAP_DMA_BASE + 0x454)
-#define OMAP_DMA_CAPS_2			(OMAP_DMA_BASE + 0x456)
-#define OMAP_DMA_CAPS_3			(OMAP_DMA_BASE + 0x458)
-#define OMAP_DMA_CAPS_4			(OMAP_DMA_BASE + 0x45a)
-#define OMAP_DMA_PCH2_SR		(OMAP_DMA_BASE + 0x460)
-#define OMAP_DMA_PCH0_SR		(OMAP_DMA_BASE + 0x480)
-#define OMAP_DMA_PCH1_SR		(OMAP_DMA_BASE + 0x482)
-#define OMAP_DMA_PCHD_SR		(OMAP_DMA_BASE + 0x4c0)
+#define OMAP24XX_DMA_EAC_AC_RD		17	/* S_DMA_16 */
+#define OMAP24XX_DMA_EAC_AC_WR		18	/* S_DMA_17 */
+#define OMAP24XX_DMA_EAC_MD_UL_RD	19	/* S_DMA_18 */
+#define OMAP24XX_DMA_EAC_MD_UL_WR	20	/* S_DMA_19 */
+#define OMAP24XX_DMA_EAC_MD_DL_RD	21	/* S_DMA_20 */
+#define OMAP24XX_DMA_EAC_MD_DL_WR	22	/* S_DMA_21 */
+#define OMAP24XX_DMA_EAC_BT_UL_RD	23	/* S_DMA_22 */
+#define OMAP24XX_DMA_EAC_BT_UL_WR	24	/* S_DMA_23 */
+#define OMAP24XX_DMA_EAC_BT_DL_RD	25	/* S_DMA_24 */
+#define OMAP24XX_DMA_EAC_BT_DL_WR	26	/* S_DMA_25 */
+#define OMAP24XX_DMA_I2C1_TX		27	/* S_DMA_26 */
+#define OMAP24XX_DMA_I2C1_RX		28	/* S_DMA_27 */
+#define OMAP24XX_DMA_I2C2_TX		29	/* S_DMA_28 */
+#define OMAP24XX_DMA_I2C2_RX		30	/* S_DMA_29 */
+#define OMAP24XX_DMA_MCBSP1_TX		31	/* SDMA_30 */
+#define OMAP24XX_DMA_MCBSP1_RX		32	/* SDMA_31 */
+#define OMAP24XX_DMA_MCBSP2_TX		33	/* SDMA_32 */
+#define OMAP24XX_DMA_MCBSP2_RX		34	/* SDMA_33 */
+#define OMAP24XX_DMA_SPI1_TX0		35	/* SDMA_34 */
+#define OMAP24XX_DMA_SPI1_RX0		36	/* SDMA_35 */
+#define OMAP24XX_DMA_SPI1_TX1		37	/* SDMA_36 */
+#define OMAP24XX_DMA_SPI1_RX1		38	/* SDMA_37 */
+#define OMAP24XX_DMA_SPI1_TX2		39	/* SDMA_38 */
+#define OMAP24XX_DMA_SPI1_RX2		40	/* SDMA_39 */
+#define OMAP24XX_DMA_SPI1_TX3		41	/* SDMA_40 */
+#define OMAP24XX_DMA_SPI1_RX3		42	/* SDMA_41 */
+#define OMAP24XX_DMA_SPI2_TX0		43	/* SDMA_42 */
+#define OMAP24XX_DMA_SPI2_RX0		44	/* SDMA_43 */
+#define OMAP24XX_DMA_SPI2_TX1		45	/* SDMA_44 */
+#define OMAP24XX_DMA_SPI2_RX1		46	/* SDMA_45 */
 
+#define OMAP24XX_DMA_UART1_TX		49	/* SDMA_48 */
+#define OMAP24XX_DMA_UART1_RX		50	/* SDMA_49 */
+#define OMAP24XX_DMA_UART2_TX		51	/* SDMA_50 */
+#define OMAP24XX_DMA_UART2_RX		52	/* SDMA_51 */
+#define OMAP24XX_DMA_UART3_TX		53	/* SDMA_52 */
+#define OMAP24XX_DMA_UART3_RX		54	/* SDMA_53 */
+#define OMAP24XX_DMA_USB_W2FC_TX0	55	/* SDMA_54 */
+#define OMAP24XX_DMA_USB_W2FC_RX0	56	/* SDMA_55 */
+#define OMAP24XX_DMA_USB_W2FC_TX1	57	/* SDMA_56 */
+#define OMAP24XX_DMA_USB_W2FC_RX1	58	/* SDMA_57 */
+#define OMAP24XX_DMA_USB_W2FC_TX2	59	/* SDMA_58 */
+#define OMAP24XX_DMA_USB_W2FC_RX2	60	/* SDMA_59 */
+#define OMAP24XX_DMA_MMC1_TX		61	/* SDMA_60 */
+#define OMAP24XX_DMA_MMC1_RX		62	/* SDMA_61 */
+#define OMAP24XX_DMA_MS			63	/* SDMA_62 */
+
+/*----------------------------------------------------------------------------*/
+
+/* Hardware registers for LCD DMA */
 #define OMAP1510_DMA_LCD_BASE		(0xfffedb00)
 #define OMAP1510_DMA_LCD_CTRL		(OMAP1510_DMA_LCD_BASE + 0x00)
 #define OMAP1510_DMA_LCD_TOP_F1_L	(OMAP1510_DMA_LCD_BASE + 0x02)
@@ -116,7 +259,7 @@
 #define OMAP1510_DMA_LCD_BOT_F1_U	(OMAP1510_DMA_LCD_BASE + 0x08)
 
 #define OMAP1610_DMA_LCD_BASE		(0xfffee300)
-#define OMAP1610_DMA_LCD_CSDP      	(OMAP1610_DMA_LCD_BASE + 0xc0)
+#define OMAP1610_DMA_LCD_CSDP		(OMAP1610_DMA_LCD_BASE + 0xc0)
 #define OMAP1610_DMA_LCD_CCR		(OMAP1610_DMA_LCD_BASE + 0xc2)
 #define OMAP1610_DMA_LCD_CTRL		(OMAP1610_DMA_LCD_BASE + 0xc4)
 #define OMAP1610_DMA_LCD_TOP_B1_L	(OMAP1610_DMA_LCD_BASE + 0xc8)
@@ -134,37 +277,18 @@
 #define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
 #define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
 
-
-/* Every LCh has its own set of the registers below */
-#define OMAP_DMA_CSDP(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x00)
-#define OMAP_DMA_CCR(n)			(OMAP_DMA_BASE + 0x40 * (n) + 0x02)
-#define OMAP_DMA_CICR(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x04)
-#define OMAP_DMA_CSR(n)			(OMAP_DMA_BASE + 0x40 * (n) + 0x06)
-#define OMAP_DMA_CSSA_L(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x08)
-#define OMAP_DMA_CSSA_U(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x0a)
-#define OMAP_DMA_CDSA_L(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x0c)
-#define OMAP_DMA_CDSA_U(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x0e)
-#define OMAP_DMA_CEN(n)			(OMAP_DMA_BASE + 0x40 * (n) + 0x10)
-#define OMAP_DMA_CFN(n)			(OMAP_DMA_BASE + 0x40 * (n) + 0x12)
-#define OMAP_DMA_CSFI(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x14)
-#define OMAP_DMA_CSEI(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x16)
-#define OMAP_DMA_CSAC(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x18)
-#define OMAP_DMA_CDAC(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x1a)
-#define OMAP_DMA_CDEI(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x1c)
-#define OMAP_DMA_CDFI(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x1e)
-#define OMAP_DMA_COLOR_L(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x20)
-#define OMAP_DMA_COLOR_U(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x22)
-#define OMAP_DMA_CCR2(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x24)
-#define OMAP_DMA_CLNK_CTRL(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x28)
-#define OMAP_DMA_LCH_CTRL(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x2a)
-
-#define OMAP_DMA_TOUT_IRQ		(1 << 0)
+#define OMAP_DMA_TOUT_IRQ		(1 << 0)	/* Only on omap1 */
 #define OMAP_DMA_DROP_IRQ		(1 << 1)
 #define OMAP_DMA_HALF_IRQ		(1 << 2)
 #define OMAP_DMA_FRAME_IRQ		(1 << 3)
 #define OMAP_DMA_LAST_IRQ		(1 << 4)
 #define OMAP_DMA_BLOCK_IRQ		(1 << 5)
-#define OMAP_DMA_SYNC_IRQ		(1 << 6)
+#define OMAP1_DMA_SYNC_IRQ		(1 << 6)
+#define OMAP2_DMA_PKT_IRQ		(1 << 7)
+#define OMAP2_DMA_TRANS_ERR_IRQ		(1 << 8)
+#define OMAP2_DMA_SECURE_ERR_IRQ	(1 << 9)
+#define OMAP2_DMA_SUPERVISOR_ERR_IRQ	(1 << 10)
+#define OMAP2_DMA_MISALIGNED_ERR_IRQ	(1 << 11)
 
 #define OMAP_DMA_DATA_TYPE_S8		0x00
 #define OMAP_DMA_DATA_TYPE_S16		0x01
@@ -194,6 +318,7 @@ enum {
 	OMAP_LCD_DMA_B2_BOTTOM
 };
 
+/* REVISIT: Check if BURST_4 is really 1 (or 2) */
 enum omap_dma_burst_mode {
 	OMAP_DMA_DATA_BURST_DIS = 0,
 	OMAP_DMA_DATA_BURST_4,
@@ -206,6 +331,31 @@ enum omap_dma_color_mode {
 	OMAP_DMA_TRANSPARENT_COPY
 };
 
+struct omap_dma_channel_params {
+	int data_type;		/* data type 8,16,32 */
+	int elem_count;		/* number of elements in a frame */
+	int frame_count;	/* number of frames in a element */
+
+	int src_port;		/* Only on OMAP1 REVISIT: Is this needed? */
+	int src_amode;		/* constant , post increment, indexed , double indexed */
+	int src_start;		/* source address : physical */
+	int src_ei;		/* source element index */
+	int src_fi;		/* source frame index */
+
+	int dst_port;		/* Only on OMAP1 REVISIT: Is this needed? */
+	int dst_amode;		/* constant , post increment, indexed , double indexed */
+	int dst_start;		/* source address : physical */
+	int dst_ei;		/* source element index */
+	int dst_fi;		/* source frame index */
+
+	int trigger;		/* trigger attached if the channel is synchronized */
+	int sync_mode;		/* sycn on element, frame , block or packet */
+	int src_or_dst_synch;	/* source synch(1) or destination synch(0) */
+
+	int ie;			/* interrupt enabled */
+};
+
+
 extern void omap_set_dma_priority(int dst_port, int priority);
 extern int omap_request_dma(int dev_id, const char *dev_name,
 			    void (* callback)(int lch, u16 ch_status, void *data),
@@ -217,24 +367,30 @@ extern void omap_start_dma(int lch);
 extern void omap_stop_dma(int lch);
 extern void omap_set_dma_transfer_params(int lch, int data_type,
 					 int elem_count, int frame_count,
-					 int sync_mode);
+					 int sync_mode,
+					 int dma_trigger, int src_or_dst_synch);
 extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode,
 				    u32 color);
 
 extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
-				    unsigned long src_start);
+				    unsigned long src_start,
+				    int src_ei, int src_fi);
 extern void omap_set_dma_src_index(int lch, int eidx, int fidx);
 extern void omap_set_dma_src_data_pack(int lch, int enable);
 extern void omap_set_dma_src_burst_mode(int lch,
 					enum omap_dma_burst_mode burst_mode);
 
 extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
-				     unsigned long dest_start);
+				     unsigned long dest_start,
+				     int dst_ei, int dst_fi);
 extern void omap_set_dma_dest_index(int lch, int eidx, int fidx);
 extern void omap_set_dma_dest_data_pack(int lch, int enable);
 extern void omap_set_dma_dest_burst_mode(int lch,
 					 enum omap_dma_burst_mode burst_mode);
 
+extern void omap_set_dma_params(int lch,
+				struct omap_dma_channel_params * params);
+
 extern void omap_dma_link_lch (int lch_head, int lch_queue);
 extern void omap_dma_unlink_lch (int lch_head, int lch_queue);
 
@@ -244,9 +400,6 @@ extern int omap_get_dma_src_addr_counter(int lch);
 extern void omap_clear_dma(int lch);
 extern int omap_dma_running(void);
 
-/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
-extern int omap_dma_in_1510_mode(void);
-
 /* LCD DMA functions */
 extern int omap_request_lcd_dma(void (* callback)(u16 status, void *data),
 				void *data);

include/asm-arm/arch-omap/entry-macro.S

@@ -10,6 +10,20 @@
 
 #if defined(CONFIG_ARCH_OMAP1)
 
+#if defined(CONFIG_ARCH_OMAP730) && \
+	(defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
+#error "FIXME: OMAP730 doesn't support multiple-OMAP"
+#elif defined(CONFIG_ARCH_OMAP730)
+#define INT_IH2_IRQ		INT_730_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP15XX)
+#define INT_IH2_IRQ		INT_1510_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP16XX)
+#define INT_IH2_IRQ		INT_1610_IH2_IRQ
+#else
+#warning "IH2 IRQ defaulted"
+#define INT_IH2_IRQ		INT_1510_IH2_IRQ
+#endif
+
  		.macro	disable_fiq
 		.endm
 

include/asm-arm/arch-omap/fpga.h

@@ -19,7 +19,7 @@
 #ifndef __ASM_ARCH_OMAP_FPGA_H
 #define __ASM_ARCH_OMAP_FPGA_H
 
-#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP1510)
+#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX)
 extern void omap1510_fpga_init_irq(void);
 #else
 #define omap1510_fpga_init_irq()	(0)
@@ -77,6 +77,8 @@ struct h2p2_dbg_fpga {
 #define H2P2_DBG_FPGA_LOAD_METER_SIZE	11
 #define H2P2_DBG_FPGA_LOAD_METER_MASK	((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
 
+#define H2P2_DBG_FPGA_P2_LED_TIMER		(1 << 0)
+#define H2P2_DBG_FPGA_P2_LED_IDLE		(1 << 1)
 
 /*
  * ---------------------------------------------------------------------------

include/asm-arm/arch-omap/gpio.h

@@ -67,7 +67,7 @@
 
 #define OMAP_GPIO_IRQ(nr)	(OMAP_GPIO_IS_MPUIO(nr) ? \
 				 IH_MPUIO_BASE + ((nr) & 0x0f) : \
-				 IH_GPIO_BASE + ((nr) & 0x3f))
+				 IH_GPIO_BASE + (nr))
 
 extern int omap_gpio_init(void);	/* Call from board init only */
 extern int omap_request_gpio(int gpio);

include/asm-arm/arch-omap/hardware.h

@@ -267,8 +267,6 @@
 #define OMAP_LPG2_LCR			(OMAP_LPG2_BASE + 0x00)
 #define OMAP_LPG2_PMR			(OMAP_LPG2_BASE + 0x04)
 
-#ifndef __ASSEMBLER__
-
 /*
  * ---------------------------------------------------------------------------
  * Processor specific defines
@@ -277,13 +275,11 @@
 
 #include "omap730.h"
 #include "omap1510.h"
-
-#ifdef CONFIG_ARCH_OMAP24XX
 #include "omap24xx.h"
-#endif
-
 #include "omap16xx.h"
 
+#ifndef __ASSEMBLER__
+
 /*
  * ---------------------------------------------------------------------------
  * Board specific defines

include/asm-arm/arch-omap/io.h

@@ -52,23 +52,33 @@
  * ----------------------------------------------------------------------------
  */
 
+#define PCIO_BASE	0
+
 #if defined(CONFIG_ARCH_OMAP1)
+
 #define IO_PHYS		0xFFFB0000
-#define IO_OFFSET      -0x01000000	/* Virtual IO = 0xfefb0000 */
+#define IO_OFFSET	0x01000000	/* Virtual IO = 0xfefb0000 */
 #define IO_SIZE		0x40000
+#define IO_VIRT		(IO_PHYS - IO_OFFSET)
+#define IO_ADDRESS(pa)	((pa) - IO_OFFSET)
+#define io_p2v(pa)	((pa) - IO_OFFSET)
+#define io_v2p(va)	((va) + IO_OFFSET)
 
 #elif defined(CONFIG_ARCH_OMAP2)
-#define IO_PHYS		0x48000000	/* L4 peripherals; other stuff has to be mapped *
-					 * manually. */
-#define IO_OFFSET	0x90000000	/* Virtual IO = 0xd8000000 */
-#define IO_SIZE		0x08000000
-#endif
 
-#define IO_VIRT		(IO_PHYS + IO_OFFSET)
-#define IO_ADDRESS(x)	((x) + IO_OFFSET)
-#define PCIO_BASE	0
-#define io_p2v(x)	((x) + IO_OFFSET)
-#define io_v2p(x)	((x) - IO_OFFSET)
+/* We map both L3 and L4 on OMAP2 */
+#define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 */
+#define L3_24XX_VIRT	0xf8000000
+#define L3_24XX_SIZE	SZ_1M		/* 44kB of 128MB used, want 1MB sect */
+#define L4_24XX_PHYS	L4_24XX_BASE	/* 0x48000000 */
+#define L4_24XX_VIRT	0xd8000000
+#define L4_24XX_SIZE	SZ_1M		/* 1MB of 128MB used, want 1MB sect */
+#define IO_OFFSET	0x90000000
+#define IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
+#define io_p2v(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
+#define io_v2p(va)	((va) - IO_OFFSET)	/* Works for L3 and L4 */
+
+#endif
 
 #ifndef __ASSEMBLER__
 

include/asm-arm/arch-omap/irqs.h

@@ -22,8 +22,8 @@
  *	 are different.
  */
 
-#ifndef __ASM_ARCH_OMAP1510_IRQS_H
-#define __ASM_ARCH_OMAP1510_IRQS_H
+#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
+#define __ASM_ARCH_OMAP15XX_IRQS_H
 
 /*
  * IRQ numbers for interrupt handler 1
@@ -31,7 +31,6 @@
  * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
  *
  */
-#define INT_IH2_IRQ		0
 #define INT_CAMERA		1
 #define INT_FIQ			3
 #define INT_RTDX		6
@@ -60,6 +59,7 @@
 /*
  * OMAP-1510 specific IRQ numbers for interrupt handler 1
  */
+#define INT_1510_IH2_IRQ	0
 #define INT_1510_RES2		2
 #define INT_1510_SPI_TX		4
 #define INT_1510_SPI_RX		5
@@ -71,6 +71,7 @@
 /*
  * OMAP-1610 specific IRQ numbers for interrupt handler 1
  */
+#define INT_1610_IH2_IRQ	0
 #define INT_1610_IH2_FIQ	2
 #define INT_1610_McBSP2_TX	4
 #define INT_1610_McBSP2_RX	5
@@ -231,6 +232,12 @@
 #define INT_730_DMA_CH15	(62 + IH2_BASE)
 #define INT_730_NAND		(63 + IH2_BASE)
 
+#define INT_24XX_SYS_NIRQ	7
+#define INT_24XX_SDMA_IRQ0	12
+#define INT_24XX_SDMA_IRQ1	13
+#define INT_24XX_SDMA_IRQ2	14
+#define INT_24XX_SDMA_IRQ3	15
+#define INT_24XX_DSS_IRQ	25
 #define INT_24XX_GPIO_BANK1	29
 #define INT_24XX_GPIO_BANK2	30
 #define INT_24XX_GPIO_BANK3	31

include/asm-arm/arch-omap/memory.h

@@ -61,7 +61,7 @@
  * Note that the is_lbus_device() test is not very efficient on 1510
  * because of the strncmp().
  */
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 
 /*
  * OMAP-1510 Local Bus address offset
@@ -84,7 +84,7 @@
 					virt_to_lbus(addr) : \
 					__virt_to_bus(addr);})
 
-#endif	/* CONFIG_ARCH_OMAP1510 */
+#endif	/* CONFIG_ARCH_OMAP15XX */
 
 #endif
 

include/asm-arm/arch-omap/menelaus.h

+/*
+ * linux/include/asm-arm/arch-omap/menelaus.h
+ *
+ * Functions to access Menelaus power management chip
+ */
+
+#ifndef __ASM_ARCH_MENELAUS_H
+#define __ASM_ARCH_MENELAUS_H
+
+extern void menelaus_mmc_register(void (*callback)(u8 card_mask),
+				  unsigned long data);
+extern void menelaus_mmc_remove(void);
+extern void menelaus_mmc_opendrain(int enable);
+
+#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_MENELAUS)
+#define omap_has_menelaus()	1
+#else
+#define omap_has_menelaus()	0
+#endif
+
+#endif
+

include/asm-arm/arch-omap/mux.h

@@ -4,7 +4,7 @@
  * Table of the Omap register configurations for the FUNC_MUX and
  * PULL_DWN combinations.
  *
- * Copyright (C) 2003 Nokia Corporation
+ * Copyright (C) 2003 - 2005 Nokia Corporation
  *
  * Written by Tony Lindgren <tony.lindgren@nokia.com>
  *
@@ -58,6 +58,16 @@
 					.pu_pd_reg = PU_PD_SEL_##reg, \
 					.pu_pd_val = status,
 
+#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
+					.mux_reg = OMAP730_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_730(reg, bit, status)	.pull_name = "OMAP730_IO_CONF_"#reg, \
+					.pull_reg = OMAP730_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
 #else
 
 #define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
@@ -71,6 +81,15 @@
 #define PU_PD_REG(reg, status)		.pu_pd_reg = PU_PD_SEL_##reg, \
 					.pu_pd_val = status,
 
+#define MUX_REG_730(reg, mode_offset, mode) \
+					.mux_reg = OMAP730_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_730(reg, bit, status)	.pull_reg = OMAP730_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
 #endif /* CONFIG_OMAP_MUX_DEBUG */
 
 #define MUX_CFG(desc, mux_reg, mode_offset, mode,	\
@@ -84,13 +103,44 @@
 	PU_PD_REG(pu_pd_reg, pu_pd_status)		\
 },
 
+
+/*
+ * OMAP730 has a slightly different config for the pin mux.
+ * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
+ *   not the FUNC_MUX_CTRL_x regs from hardware.h
+ * - for pull-up/down, only has one enable bit which is is in the same register
+ *   as mux config
+ */
+#define MUX_CFG_730(desc, mux_reg, mode_offset, mode,	\
+		   pull_reg, pull_bit, pull_status,	\
+		   pu_pd_reg, pu_pd_status, debug_status)\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG_730(mux_reg, mode_offset, mode)		\
+	PULL_REG_730(mux_reg, pull_bit, pull_status)	\
+	PU_PD_REG(pu_pd_reg, pu_pd_status)		\
+},
+
+#define MUX_CFG_24XX(desc, reg_offset, mode,			\
+				pull_en, pull_mode, dbg)	\
+{								\
+	.name		= desc,					\
+	.debug		= dbg,					\
+	.mux_reg	= reg_offset,				\
+	.mask		= mode,					\
+	.pull_val	= pull_en,				\
+	.pu_pd_val	= pull_mode,				\
+},
+
+
 #define PULL_DISABLED	0
 #define PULL_ENABLED	1
 
 #define PULL_DOWN	0
 #define PULL_UP		1
 
-typedef struct {
+struct pin_config {
 	char *name;
 	unsigned char busy;
 	unsigned char debug;
@@ -108,13 +158,23 @@ typedef struct {
 	const char *pu_pd_name;
 	const unsigned int pu_pd_reg;
 	const unsigned char pu_pd_val;
-} reg_cfg_set;
+};
 
-/*
- * Lookup table for FUNC_MUX and PULL_DWN register combinations for each
- * device. See also reg_cfg_table below for the register values.
- */
-typedef enum {
+enum omap730_index {
+	/* OMAP 730 keyboard */
+	E2_730_KBR0,
+	J7_730_KBR1,
+	E1_730_KBR2,
+	F3_730_KBR3,
+	D2_730_KBR4,
+	C2_730_KBC0,
+	D3_730_KBC1,
+	E4_730_KBC2,
+	F4_730_KBC3,
+	E3_730_KBC4,
+};
+
+enum omap1xxx_index {
 	/* UART1 (BT_UART_GATING)*/
 	UART1_TX = 0,
 	UART1_RTS,
@@ -331,245 +391,34 @@ typedef enum {
 	V10_1610_CF_IREQ,
 	W10_1610_CF_RESET,
 	W11_1610_CF_CD1,
-} reg_cfg_t;
+};
 
-#if defined(__MUX_C__) && defined(CONFIG_OMAP_MUX)
+enum omap24xx_index {
+	/* 24xx I2C */
+	M19_24XX_I2C1_SCL,
+	L15_24XX_I2C1_SDA,
+	J15_24XX_I2C2_SCL,
+	H19_24XX_I2C2_SDA,
 
-/*
- * Table of various FUNC_MUX and PULL_DWN combinations for each device.
- * See also reg_cfg_t above for the lookup table.
- */
-static const reg_cfg_set __initdata_or_module
-reg_cfg_table[] = {
-/*
- *	 description		mux  mode   mux	 pull pull  pull  pu_pd	 pu  dbg
- *				reg  offset mode reg  bit   ena	  reg
- */
-MUX_CFG("UART1_TX",		 9,   21,    1,	  2,   3,   0,	 NA,	 0,  0)
-MUX_CFG("UART1_RTS",		 9,   12,    1,	  2,   0,   0,	 NA,	 0,  0)
-
-/* UART2 (COM_UART_GATING), conflicts with USB2 */
-MUX_CFG("UART2_TX",		 C,   27,    1,	  3,   3,   0,	 NA,	 0,  0)
-MUX_CFG("UART2_RX",		 C,   18,    0,	  3,   1,   1,	 NA,	 0,  0)
-MUX_CFG("UART2_CTS",		 C,   21,    0,	  3,   1,   1,	 NA,	 0,  0)
-MUX_CFG("UART2_RTS",		 C,   24,    1,	  3,   2,   0,	 NA,	 0,  0)
-
-/* UART3 (GIGA_UART_GATING) */
-MUX_CFG("UART3_TX",		 6,    0,    1,	  0,  30,   0,	 NA,	 0,  0)
-MUX_CFG("UART3_RX",		 6,    3,    0,	  0,  31,   1,	 NA,	 0,  0)
-MUX_CFG("UART3_CTS",		 5,   12,    2,	  0,  24,   0,	 NA,	 0,  0)
-MUX_CFG("UART3_RTS",		 5,   15,    2,	  0,  25,   0,	 NA,	 0,  0)
-MUX_CFG("UART3_CLKREQ",		 9,   27,    0,	  2,   5,   0,	 NA,	 0,  0)
-MUX_CFG("UART3_BCLK",		 A,    0,    0,	  2,   6,   0,	 NA,	 0,  0)
-MUX_CFG("Y15_1610_UART3_RTS",	 A,    0,    1,	  2,   6,   0,	 NA,	 0,  0)
-
-/* PWT & PWL, conflicts with UART3 */
-MUX_CFG("PWT",		 	 6,    0,    2,	  0,  30,   0,	 NA,	 0,  0)
-MUX_CFG("PWL",		 	 6,    3,    1,	  0,  31,   1,	 NA,	 0,  0)
-
-/* USB internal master generic */
-MUX_CFG("R18_USB_VBUS",		 7,    9,    2,	  1,  11,   0,	 NA,	 0,  1)
-MUX_CFG("R18_1510_USB_GPIO0",	 7,    9,    0,	  1,  11,   1,	 NA,	 0,  1)
-/* works around erratum:  W4_USB_PUEN and W4_USB_PUDIS are switched! */
-MUX_CFG("W4_USB_PUEN",		 D,    3,    3,	  3,   5,   1,	 NA,	 0,  1)
-MUX_CFG("W4_USB_CLKO",		 D,    3,    1,	  3,   5,   0,	 NA,	 0,  1)
-MUX_CFG("W4_USB_HIGHZ",		 D,    3,    4,	  3,   5,   0,	  3,	 0,  1)
-MUX_CFG("W4_GPIO58",		 D,    3,    7,	  3,   5,   0,	  3,	 0,  1)
-
-/* USB1 master */
-MUX_CFG("USB1_SUSP",		 8,   27,    2,	  1,  27,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_SE0",		 9,    0,    2,	  1,  28,   0,	 NA,	 0,  1)
-MUX_CFG("W13_1610_USB1_SE0",	 9,    0,    4,	  1,  28,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_TXEN",		 9,    3,    2,	  1,  29,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_TXD",		 9,   24,    1,	  2,   4,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_VP",		 A,    3,    1,	  2,   7,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_VM",		 A,    6,    1,	  2,   8,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_RCV",		 A,    9,    1,	  2,   9,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_SPEED",		 A,   12,    2,	  2,  10,   0,	 NA,	 0,  1)
-MUX_CFG("R13_1610_USB1_SPEED",	 A,   12,    5,	  2,  10,   0,	 NA,	 0,  1)
-MUX_CFG("R13_1710_USB1_SEO",	 A,   12,    5,   2,  10,   0,   NA,     0,  1)
-
-/* USB2 master */
-MUX_CFG("USB2_SUSP",		 B,    3,    1,	  2,  17,   0,	 NA,	 0,  1)
-MUX_CFG("USB2_VP",		 B,    6,    1,	  2,  18,   0,	 NA,	 0,  1)
-MUX_CFG("USB2_TXEN",		 B,    9,    1,	  2,  19,   0,	 NA,	 0,  1)
-MUX_CFG("USB2_VM",		 C,   18,    1,	  3,   0,   0,	 NA,	 0,  1)
-MUX_CFG("USB2_RCV",		 C,   21,    1,	  3,   1,   0,	 NA,	 0,  1)
-MUX_CFG("USB2_SE0",		 C,   24,    2,	  3,   2,   0,	 NA,	 0,  1)
-MUX_CFG("USB2_TXD",		 C,   27,    2,	  3,   3,   0,	 NA,	 0,  1)
-
-/* OMAP-1510 GPIO */
-MUX_CFG("R18_1510_GPIO0",	 7,    9,    0,   1,  11,   1,    0,     0,  1)
-MUX_CFG("R19_1510_GPIO1",	 7,    6,    0,   1,  10,   1,    0,     0,  1)
-MUX_CFG("M14_1510_GPIO2",	 7,    3,    0,   1,   9,   1,    0,     0,  1)
-
-/* OMAP1610 GPIO */
-MUX_CFG("P18_1610_GPIO3",	 7,    0,    0,   1,   8,   0,   NA,     0,  1)
-MUX_CFG("Y15_1610_GPIO17",	 A,    0,    7,   2,   6,   0,   NA,     0,  1)
-
-/* OMAP-1710 GPIO */
-MUX_CFG("R18_1710_GPIO0",        7,    9,    0,   1,  11,   1,    1,     1,  1)
-MUX_CFG("V2_1710_GPIO10",        F,   27,    1,   4,   3,   1,    4,     1,  1)
-MUX_CFG("N21_1710_GPIO14",       6,    9,    0,   1,   1,   1,    1,     1,  1)
-MUX_CFG("W15_1710_GPIO40",       9,   27,    7,   2,   5,   1,    2,     1,  1)
-
-/* MPUIO */
-MUX_CFG("MPUIO2",		 7,   18,    0,	  1,  14,   1,	 NA,	 0,  1)
-MUX_CFG("N15_1610_MPUIO2",	 7,   18,    0,	  1,  14,   1,	  1,	 0,  1)
-MUX_CFG("MPUIO4",		 7,   15,    0,	  1,  13,   1,	 NA,	 0,  1)
-MUX_CFG("MPUIO5",		 7,   12,    0,	  1,  12,   1,	 NA,	 0,  1)
-
-MUX_CFG("T20_1610_MPUIO5",	 7,   12,    0,	  1,  12,   0,	  3,	 0,  1)
-MUX_CFG("W11_1610_MPUIO6",	10,   15,    2,	  3,   8,   0,	  3,	 0,  1)
-MUX_CFG("V10_1610_MPUIO7",	 A,   24,    2,	  2,  14,   0,	  2,	 0,  1)
-MUX_CFG("W11_1610_MPUIO9",	10,   15,    1,	  3,   8,   0,	  3,	 0,  1)
-MUX_CFG("V10_1610_MPUIO10",	 A,   24,    1,	  2,  14,   0,	  2,	 0,  1)
-MUX_CFG("W10_1610_MPUIO11",	 A,   18,    2,	  2,  11,   0,	  2,	 0,  1)
-MUX_CFG("E20_1610_MPUIO13",	 3,   21,    1,	  0,   7,   0,	  0,	 0,  1)
-MUX_CFG("U20_1610_MPUIO14",	 9,    6,    6,	  0,  30,   0,	  0,	 0,  1)
-MUX_CFG("E19_1610_MPUIO15",	 3,   18,    1,	  0,   6,   0,	  0,	 0,  1)
-
-/* MCBSP2 */
-MUX_CFG("MCBSP2_CLKR",		 C,    6,    0,	  2,  27,   1,	 NA,	 0,  1)
-MUX_CFG("MCBSP2_CLKX",		 C,    9,    0,	  2,  29,   1,	 NA,	 0,  1)
-MUX_CFG("MCBSP2_DR",		 C,    0,    0,	  2,  26,   1,	 NA,	 0,  1)
-MUX_CFG("MCBSP2_DX",		 C,   15,    0,	  2,  31,   1,	 NA,	 0,  1)
-MUX_CFG("MCBSP2_FSR",		 C,   12,    0,	  2,  30,   1,	 NA,	 0,  1)
-MUX_CFG("MCBSP2_FSX",		 C,    3,    0,	  2,  27,   1,	 NA,	 0,  1)
-
-/* MCBSP3 NOTE: Mode must 1 for clock */
-MUX_CFG("MCBSP3_CLKX",		 9,    3,    1,	  1,  29,   0,	 NA,	 0,  1)
-
-/* Misc ballouts */
-MUX_CFG("BALLOUT_V8_ARMIO3",	 B,   18,    0,	  2,  25,   1,	 NA,	 0,  1)
-MUX_CFG("N20_HDQ",	       6,   18,    1,   1,   4,   0,    1,     4,  0)
-
-/* OMAP-1610 MMC2 */
-MUX_CFG("W8_1610_MMC2_DAT0",	 B,   21,    6,	  2,  23,   1,	  2,	 1,  1)
-MUX_CFG("V8_1610_MMC2_DAT1",	 B,   27,    6,	  2,  25,   1,	  2,	 1,  1)
-MUX_CFG("W15_1610_MMC2_DAT2",	 9,   12,    6,	  2,   5,   1,	  2,	 1,  1)
-MUX_CFG("R10_1610_MMC2_DAT3",	 B,   18,    6,	  2,  22,   1,	  2,	 1,  1)
-MUX_CFG("Y10_1610_MMC2_CLK",	 B,    3,    6,	  2,  17,   0,	  2,	 0,  1)
-MUX_CFG("Y8_1610_MMC2_CMD",	 B,   24,    6,	  2,  24,   1,	  2,	 1,  1)
-MUX_CFG("V9_1610_MMC2_CMDDIR",	 B,   12,    6,	  2,  20,   0,	  2,	 1,  1)
-MUX_CFG("V5_1610_MMC2_DATDIR0",	 B,   15,    6,	  2,  21,   0,	  2,	 1,  1)
-MUX_CFG("W19_1610_MMC2_DATDIR1", 8,   15,    6,	  1,  23,   0,	  1,	 1,  1)
-MUX_CFG("R18_1610_MMC2_CLKIN",	 7,    9,    6,	  1,  11,   0,	  1,	11,  1)
-
-/* OMAP-1610 External Trace Interface */
-MUX_CFG("M19_1610_ETM_PSTAT0",	 5,   27,    1,	  0,  29,   0,	  0,	 0,  1)
-MUX_CFG("L15_1610_ETM_PSTAT1",	 5,   24,    1,	  0,  28,   0,	  0,	 0,  1)
-MUX_CFG("L18_1610_ETM_PSTAT2",	 5,   21,    1,	  0,  27,   0,	  0,	 0,  1)
-MUX_CFG("L19_1610_ETM_D0",	 5,   18,    1,	  0,  26,   0,	  0,	 0,  1)
-MUX_CFG("J19_1610_ETM_D6",	 5,    0,    1,	  0,  20,   0,	  0,	 0,  1)
-MUX_CFG("J18_1610_ETM_D7",	 5,   27,    1,	  0,  19,   0,	  0,	 0,  1)
-
-/* OMAP16XX GPIO */
-MUX_CFG("P20_1610_GPIO4",	 6,   27,    0,	  1,   7,   0,	  1,	 1,  1)
-MUX_CFG("V9_1610_GPIO7",	 B,   12,    1,	  2,  20,   0,	  2,	 1,  1)
-MUX_CFG("W8_1610_GPIO9",	 B,   21,    0,	  2,  23,   0,	  2,	 1,  1)
-MUX_CFG("N20_1610_GPIO11",       6,   18,    0,   1,   4,   0,    1,     1,  1)
-MUX_CFG("N19_1610_GPIO13",	 6,   12,    0,	  1,   2,   0,	  1,	 1,  1)
-MUX_CFG("P10_1610_GPIO22",	 C,    0,    7,	  2,  26,   0,	  2,	 1,  1)
-MUX_CFG("V5_1610_GPIO24",	 B,   15,    7,	  2,  21,   0,	  2,	 1,  1)
-MUX_CFG("AA20_1610_GPIO_41",	 9,    9,    7,	  1,  31,   0,	  1,	 1,  1)
-MUX_CFG("W19_1610_GPIO48",	 8,   15,    7,   1,  23,   1,    1,     0,  1)
-MUX_CFG("M7_1610_GPIO62",	10,    0,    0,   4,  24,   0,    4,     0,  1)
-MUX_CFG("V14_16XX_GPIO37",	 9,   18,    7,	  2,   2,   0,	  2,	 2,  0)
-MUX_CFG("R9_16XX_GPIO18",	 C,   18,    7,   3,   0,   0,    3,     0,  0)
-MUX_CFG("L14_16XX_GPIO49",	 6,    3,    7,   0,  31,   0,    0,    31,  0)
-
-/* OMAP-1610 uWire */
-MUX_CFG("V19_1610_UWIRE_SCLK",	 8,    6,    0,	  1,  20,   0,	  1,	 1,  1)
-MUX_CFG("U18_1610_UWIRE_SDI",	 8,    0,    0,	  1,  18,   0,	  1,	 1,  1)
-MUX_CFG("W21_1610_UWIRE_SDO",	 8,    3,    0,	  1,  19,   0,	  1,	 1,  1)
-MUX_CFG("N14_1610_UWIRE_CS0",	 8,    9,    1,	  1,  21,   0,	  1,	 1,  1)
-MUX_CFG("P15_1610_UWIRE_CS3",	 8,   12,    1,	  1,  22,   0,	  1,	 1,  1)
-MUX_CFG("N15_1610_UWIRE_CS1",	 7,   18,    2,	  1,  14,   0,	 NA,	 0,  1)
-
-/* OMAP-1610 Flash */
-MUX_CFG("L3_1610_FLASH_CS2B_OE",10,    6,    1,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("M8_1610_FLASH_CS2B_WE",10,    3,    1,	 NA,   0,   0,	 NA,	 0,  1)
-
-/* First MMC interface, same on 1510, 1610 and 1710 */
-MUX_CFG("MMC_CMD",		 A,   27,    0,	  2,  15,   1,	  2,	 1,  1)
-MUX_CFG("MMC_DAT1",		 A,   24,    0,	  2,  14,   1,	  2,	 1,  1)
-MUX_CFG("MMC_DAT2",		 A,   18,    0,	  2,  12,   1,	  2,	 1,  1)
-MUX_CFG("MMC_DAT0",		 B,    0,    0,	  2,  16,   1,	  2,	 1,  1)
-MUX_CFG("MMC_CLK",		 A,   21,    0,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("MMC_DAT3",		10,   15,    0,	  3,   8,   1,	  3,	 1,  1)
-MUX_CFG("M15_1710_MMC_CLKI",	 6,   21,    2,   0,   0,   0,   NA,     0,  1)
-MUX_CFG("P19_1710_MMC_CMDDIR",	 6,   24,    6,   0,   0,   0,   NA,     0,  1)
-MUX_CFG("P20_1710_MMC_DATDIR0",	 6,   27,    5,   0,   0,   0,   NA,     0,  1)
-
-/* OMAP-1610 USB0 alternate configuration */
-MUX_CFG("W9_USB0_TXEN",		 B,   9,     5,	  2,  19,   0,	  2,	 0,  1)
-MUX_CFG("AA9_USB0_VP",		 B,   6,     5,	  2,  18,   0,	  2,	 0,  1)
-MUX_CFG("Y5_USB0_RCV",		 C,  21,     5,	  3,   1,   0,	  1,	 0,  1)
-MUX_CFG("R9_USB0_VM",		 C,  18,     5,	  3,   0,   0,	  3,	 0,  1)
-MUX_CFG("V6_USB0_TXD",		 C,  27,     5,	  3,   3,   0,	  3,	 0,  1)
-MUX_CFG("W5_USB0_SE0",		 C,  24,     5,	  3,   2,   0,	  3,	 0,  1)
-MUX_CFG("V9_USB0_SPEED",	 B,  12,     5,	  2,  20,   0,	  2,	 0,  1)
-MUX_CFG("Y10_USB0_SUSP",	 B,   3,     5,	  2,  17,   0,	  2,	 0,  1)
-
-/* USB2 interface */
-MUX_CFG("W9_USB2_TXEN",		 B,   9,     1,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("AA9_USB2_VP",		 B,   6,     1,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("Y5_USB2_RCV",		 C,  21,     1,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("R9_USB2_VM",		 C,  18,     1,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("V6_USB2_TXD",		 C,  27,     2,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("W5_USB2_SE0",		 C,  24,     2,	 NA,   0,   0,	 NA,	 0,  1)
-
-/* 16XX UART */
-MUX_CFG("R13_1610_UART1_TX",	 A,  12,     6,	  2,  10,   0,	  2,	10,  1)
-MUX_CFG("V14_16XX_UART1_RX",	 9,  18,     0,	  2,   2,   0,	  2,	 2,  1)
-MUX_CFG("R14_1610_UART1_CTS",	 9,  15,     0,	  2,   1,   0,	  2,	 1,  1)
-MUX_CFG("AA15_1610_UART1_RTS",	 9,  12,     1,	  2,   0,   0,	  2,	 0,  1)
-MUX_CFG("R9_16XX_UART2_RX",	 C,  18,     0,   3,   0,   0,    3,     0,  1)
-MUX_CFG("L14_16XX_UART3_RX",	 6,   3,     0,   0,  31,   0,    0,    31,  1)
-
-/* I2C interface */
-MUX_CFG("I2C_SCL",		 7,  24,     0,	 NA,   0,   0,	 NA,	 0,  0)
-MUX_CFG("I2C_SDA",		 7,  27,     0,	 NA,   0,   0,	 NA,	 0,  0)
-
-/* Keypad */
-MUX_CFG("F18_1610_KBC0",	 3,  15,     0,	  0,   5,   1,	  0,	 0,  0)
-MUX_CFG("D20_1610_KBC1",	 3,  12,     0,	  0,   4,   1,	  0,	 0,  0)
-MUX_CFG("D19_1610_KBC2",	 3,   9,     0,	  0,   3,   1,	  0,	 0,  0)
-MUX_CFG("E18_1610_KBC3",	 3,   6,     0,	  0,   2,   1,	  0,	 0,  0)
-MUX_CFG("C21_1610_KBC4",	 3,   3,     0,	  0,   1,   1,	  0,	 0,  0)
-MUX_CFG("G18_1610_KBR0",	 4,   0,     0,	  0,   10,  1,	  0,	 1,  0)
-MUX_CFG("F19_1610_KBR1",	 3,   27,    0,	  0,   9,   1,	  0,	 1,  0)
-MUX_CFG("H14_1610_KBR2",	 3,   24,    0,	  0,   8,   1,	  0,	 1,  0)
-MUX_CFG("E20_1610_KBR3",	 3,   21,    0,	  0,   7,   1,	  0,	 1,  0)
-MUX_CFG("E19_1610_KBR4",	 3,   18,    0,	  0,   6,   1,	  0,	 1,  0)
-MUX_CFG("N19_1610_KBR5",	 6,  12,     1,	  1,   2,   1,	  1,	 1,  0)
-
-/* Power management */
-MUX_CFG("T20_1610_LOW_PWR",	 7,   12,    1,	  NA,   0,   0,   NA,	 0,  0)
-
-/* MCLK Settings */
-MUX_CFG("V5_1710_MCLK_ON",	 B,   15,    0,	  NA,   0,   0,   NA,	 0,  0)
-MUX_CFG("V5_1710_MCLK_OFF",	 B,   15,    6,	  NA,   0,   0,   NA,	 0,  0)
-MUX_CFG("R10_1610_MCLK_ON",	 B,   18,    0,	  NA,  22,   0,	  NA,	 1,  0)
-MUX_CFG("R10_1610_MCLK_OFF",	 B,   18,    6,	  2,   22,   1,	  2,	 1,  1)
-
-/* CompactFlash controller, conflicts with MMC1 */
-MUX_CFG("P11_1610_CF_CD2",	 A,   27,    3,	  2,   15,   1,	  2,	 1,  1)
-MUX_CFG("R11_1610_CF_IOIS16",	 B,    0,    3,	  2,   16,   1,	  2,	 1,  1)
-MUX_CFG("V10_1610_CF_IREQ",	 A,   24,    3,	  2,   14,   0,	  2,	 0,  1)
-MUX_CFG("W10_1610_CF_RESET",	 A,   18,    3,	  2,   12,   1,	  2,	 1,  1)
-MUX_CFG("W11_1610_CF_CD1",	10,   15,    3,	  3,    8,   1,	  3,	 1,  1)
-};
+	/* 24xx Menelaus interrupt */
+	W19_24XX_SYS_NIRQ,
 
-#endif	/* __MUX_C__ */
+	/* 24xx GPIO */
+	Y20_24XX_GPIO60,
+	M15_24XX_GPIO92,
+};
 
 #ifdef	CONFIG_OMAP_MUX
 /* setup pin muxing in Linux */
-extern int omap_cfg_reg(reg_cfg_t reg_cfg);
+extern int omap1_mux_init(void);
+extern int omap2_mux_init(void);
+extern int omap_mux_register(struct pin_config * pins, unsigned long size);
+extern int omap_cfg_reg(unsigned long reg_cfg);
 #else
 /* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
-static inline int omap_cfg_reg(reg_cfg_t reg_cfg) { return 0; }
+static inline int omap1_mux_init(void) { return 0; }
+static inline int omap2_mux_init(void) { return 0; }
+static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
 #endif
 
 #endif

include/asm-arm/arch-omap/omap1510.h

@@ -25,8 +25,8 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef __ASM_ARCH_OMAP1510_H
-#define __ASM_ARCH_OMAP1510_H
+#ifndef __ASM_ARCH_OMAP15XX_H
+#define __ASM_ARCH_OMAP15XX_H
 
 /*
  * ----------------------------------------------------------------------------
@@ -44,5 +44,5 @@
 #define OMAP1510_DSPREG_SIZE	SZ_128K
 #define OMAP1510_DSPREG_START	0xE1000000
 
-#endif /*  __ASM_ARCH_OMAP1510_H */
+#endif /*  __ASM_ARCH_OMAP15XX_H */
 

include/asm-arm/arch-omap/omap24xx.h

 #ifndef __ASM_ARCH_OMAP24XX_H
 #define __ASM_ARCH_OMAP24XX_H
 
-#define OMAP24XX_L4_IO_BASE	0x48000000
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers. Note also that some of these defines are needed
+ * for omap1 to compile without adding ifdefs.
+ */
+
+#define L4_24XX_BASE		0x48000000
+#define L3_24XX_BASE		0x68000000
 
 /* interrupt controller */
-#define OMAP24XX_IC_BASE	(OMAP24XX_L4_IO_BASE + 0xfe000)
+#define OMAP24XX_IC_BASE	(L4_24XX_BASE + 0xfe000)
 #define VA_IC_BASE		IO_ADDRESS(OMAP24XX_IC_BASE)
-
 #define OMAP24XX_IVA_INTC_BASE	0x40000000
-
 #define IRQ_SIR_IRQ		0x0040
 
+#define OMAP24XX_32KSYNCT_BASE	(L4_24XX_BASE + 0x4000)
+#define OMAP24XX_PRCM_BASE	(L4_24XX_BASE + 0x8000)
+#define OMAP24XX_SDRC_BASE	(L3_24XX_BASE + 0x9000)
+
 #endif /* __ASM_ARCH_OMAP24XX_H */
 

include/asm-arm/arch-omap/omapfb.h

+/*
+ * File: include/asm-arm/arch-omap/omapfb.h
+ *
+ * Framebuffer driver for TI OMAP boards
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __OMAPFB_H
+#define __OMAPFB_H
+
+/* IOCTL commands. */
+
+#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
+#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
+#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
+#define OMAP_IO(num)		_IO('O', num)
+
+#define OMAPFB_MIRROR		OMAP_IOW(31, int)
+#define OMAPFB_SYNC_GFX		OMAP_IO(37)
+#define OMAPFB_VSYNC		OMAP_IO(38)
+#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, enum omapfb_update_mode)
+#define OMAPFB_GET_CAPS		OMAP_IOR(42, unsigned long)
+#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, enum omapfb_update_mode)
+#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
+#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
+#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(47, struct omapfb_update_window)
+#define OMAPFB_SETUP_PLANE	OMAP_IOW(48, struct omapfb_setup_plane)
+#define OMAPFB_ENABLE_PLANE	OMAP_IOW(49, struct omapfb_enable_plane)
+#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
+
+#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
+#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
+#define OMAPFB_CAPS_PANEL_MASK		0xff000000
+
+#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
+#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
+
+/* Values from DSP must map to lower 16-bits */
+#define OMAPFB_FORMAT_MASK         0x00ff
+#define OMAPFB_FORMAT_FLAG_DOUBLE  0x0100
+
+enum omapfb_color_format {
+	OMAPFB_COLOR_RGB565 = 0,
+	OMAPFB_COLOR_YUV422,
+	OMAPFB_COLOR_YUV420,
+	OMAPFB_COLOR_CLUT_8BPP,
+	OMAPFB_COLOR_CLUT_4BPP,
+	OMAPFB_COLOR_CLUT_2BPP,
+	OMAPFB_COLOR_CLUT_1BPP,
+};
+
+struct omapfb_update_window {
+	u32 x, y;
+	u32 width, height;
+	u32 format;
+};
+
+enum omapfb_plane {
+	OMAPFB_PLANE_GFX = 0,
+	OMAPFB_PLANE_VID1,
+	OMAPFB_PLANE_VID2,
+};
+
+enum omapfb_channel_out {
+	OMAPFB_CHANNEL_OUT_LCD = 0,
+	OMAPFB_CHANNEL_OUT_DIGIT,
+};
+
+struct omapfb_setup_plane {
+	u8  plane;
+	u8  channel_out;
+	u32 offset;
+	u32 pos_x, pos_y;
+	u32 width, height;
+	u32 color_mode;
+};
+
+struct omapfb_enable_plane {
+	u8  plane;
+	u8  enable;
+};
+
+enum omapfb_color_key_type {
+	OMAPFB_COLOR_KEY_DISABLED = 0,
+	OMAPFB_COLOR_KEY_GFX_DST,
+	OMAPFB_COLOR_KEY_VID_SRC,
+};
+
+struct omapfb_color_key {
+	u8  channel_out;
+	u32 background;
+	u32 trans_key;
+	u8  key_type;
+};
+
+enum omapfb_update_mode {
+	OMAPFB_UPDATE_DISABLED = 0,
+	OMAPFB_AUTO_UPDATE,
+	OMAPFB_MANUAL_UPDATE
+};
+
+#ifdef __KERNEL__
+
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+
+#define OMAP_LCDC_INV_VSYNC             0x0001
+#define OMAP_LCDC_INV_HSYNC             0x0002
+#define OMAP_LCDC_INV_PIX_CLOCK         0x0004
+#define OMAP_LCDC_INV_OUTPUT_EN         0x0008
+#define OMAP_LCDC_HSVS_RISING_EDGE      0x0010
+#define OMAP_LCDC_HSVS_OPPOSITE         0x0020
+
+#define OMAP_LCDC_SIGNAL_MASK		0x003f
+
+#define OMAP_LCDC_PANEL_TFT		0x0100
+
+#ifdef CONFIG_ARCH_OMAP1
+#define OMAPFB_PLANE_NUM		1
+#else
+#define OMAPFB_PLANE_NUM		3
+#endif
+
+struct omapfb_device;
+
+struct lcd_panel {
+	const char	*name;
+	int		config;		/* TFT/STN, signal inversion */
+	int		bpp;		/* Pixel format in fb mem */
+	int		data_lines;	/* Lines on LCD HW interface */
+
+	int		x_res, y_res;
+	int		pixel_clock;	/* In kHz */
+	int		hsw;		/* Horizontal synchronization
+					   pulse width */
+	int		hfp;		/* Horizontal front porch */
+	int		hbp;		/* Horizontal back porch */
+	int		vsw;		/* Vertical synchronization
+					   pulse width */
+	int		vfp;		/* Vertical front porch */
+	int		vbp;		/* Vertical back porch */
+	int		acb;		/* ac-bias pin frequency */
+	int		pcd;		/* pixel clock divider.
+					   Obsolete use pixel_clock instead */
+
+	int		(*init)		(struct omapfb_device *fbdev);
+	void		(*cleanup)	(void);
+	int		(*enable)	(void);
+	void		(*disable)	(void);
+	unsigned long	(*get_caps)	(void);
+	int		(*set_bklight_level)(unsigned int level);
+	unsigned int	(*get_bklight_level)(void);
+	unsigned int	(*get_bklight_max)  (void);
+	int		(*run_test)	(int test_num);
+};
+
+struct omapfb_device;
+
+struct extif_timings {
+	int cs_on_time;
+	int cs_off_time;
+	int we_on_time;
+	int we_off_time;
+	int re_on_time;
+	int re_off_time;
+	int we_cycle_time;
+	int re_cycle_time;
+	int cs_pulse_width;
+	int access_time;
+};
+
+struct lcd_ctrl_extif {
+	int  (*init)		(void);
+	void (*cleanup)		(void);
+	void (*set_timings)	(const struct extif_timings *timings);
+	void (*write_command)	(u32 cmd);
+	u32  (*read_data)	(void);
+	void (*write_data)	(u32 data);
+	void (*transfer_area)	(int width, int height,
+				 void (callback)(void * data), void *data);
+};
+
+struct lcd_ctrl {
+	const char	*name;
+	void		*data;
+
+	int		(*init)		  (struct omapfb_device *fbdev,
+					   int ext_mode, int req_vram_size);
+	void		(*cleanup)	  (void);
+	void		(*get_vram_layout)(unsigned long *size,
+					   void **virt_base,
+					   dma_addr_t *phys_base);
+	unsigned long	(*get_caps)	  (void);
+	int		(*set_update_mode)(enum omapfb_update_mode mode);
+	enum omapfb_update_mode (*get_update_mode)(void);
+	int		(*setup_plane)	  (int plane, int channel_out,
+					   unsigned long offset,
+					   int screen_width,
+					   int pos_x, int pos_y, int width,
+					   int height, int color_mode);
+	int		(*enable_plane)	  (int plane, int enable);
+	int		(*update_window)  (struct omapfb_update_window *win,
+					   void (*callback)(void *),
+					   void *callback_data);
+	void		(*sync)		  (void);
+	void		(*suspend)	  (void);
+	void		(*resume)	  (void);
+	int		(*run_test)	  (int test_num);
+	int		(*setcolreg)	  (u_int regno, u16 red, u16 green,
+					   u16 blue, u16 transp,
+					   int update_hw_mem);
+	int		(*set_color_key)  (struct omapfb_color_key *ck);
+
+};
+
+enum omapfb_state {
+	OMAPFB_DISABLED	= 0,
+	OMAPFB_SUSPENDED= 99,
+	OMAPFB_ACTIVE	= 100
+};
+
+struct omapfb_device {
+	int			state;
+	int                     ext_lcdc;               /* Using external
+                                                           LCD controller */
+	struct semaphore	rqueue_sema;
+
+	void			*vram_virt_base;
+	dma_addr_t		vram_phys_base;
+	unsigned long		vram_size;
+
+	int			color_mode;
+	int			palette_size;
+	int			mirror;
+	u32			pseudo_palette[17];
+
+	struct lcd_panel	*panel;			/* LCD panel */
+	struct lcd_ctrl         *ctrl;			/* LCD controller */
+	struct lcd_ctrl		*int_ctrl;		/* internal LCD ctrl */
+	struct lcd_ctrl_extif	*ext_if;		/* LCD ctrl external
+							   interface */
+	struct fb_info		*fb_info;
+
+	struct device		*dev;
+};
+
+extern struct lcd_panel h3_panel;
+extern struct lcd_panel h2_panel;
+extern struct lcd_panel p2_panel;
+extern struct lcd_panel osk_panel;
+extern struct lcd_panel innovator1610_panel;
+extern struct lcd_panel innovator1510_panel;
+
+#ifdef CONFIG_ARCH_OMAP1
+extern struct lcd_ctrl omap1_lcd_ctrl;
+#else
+extern struct lcd_ctrl omap2_disp_ctrl;
+#endif
+
+extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
+
+#endif /* __KERNEL__ */
+
+#endif /* __OMAPFB_H */

include/asm-arm/arch-omap/pm.h

@@ -98,7 +98,14 @@
 #define OMAP1610_IDLECT3		0xfffece24
 #define OMAP1610_IDLE_LOOP_REQUEST	0x0400
 
-#if     !defined(CONFIG_ARCH_OMAP1510) && \
+#define OMAP730_IDLECT1_SLEEP_VAL	0x16c7
+#define OMAP730_IDLECT2_SLEEP_VAL	0x09c7
+#define OMAP730_IDLECT3_VAL		0x3f
+#define OMAP730_IDLECT3		0xfffece24
+#define OMAP730_IDLE_LOOP_REQUEST	0x0C00
+
+#if     !defined(CONFIG_ARCH_OMAP730) && \
+	!defined(CONFIG_ARCH_OMAP15XX) && \
 	!defined(CONFIG_ARCH_OMAP16XX) && \
 	!defined(CONFIG_ARCH_OMAP24XX)
 #error "Power management for this processor not implemented yet"
@@ -107,8 +114,10 @@
 #ifndef __ASSEMBLER__
 extern void omap_pm_idle(void);
 extern void omap_pm_suspend(void);
+extern void omap730_cpu_suspend(unsigned short, unsigned short);
 extern void omap1510_cpu_suspend(unsigned short, unsigned short);
 extern void omap1610_cpu_suspend(unsigned short, unsigned short);
+extern void omap730_idle_loop_suspend(void);
 extern void omap1510_idle_loop_suspend(void);
 extern void omap1610_idle_loop_suspend(void);
 
@@ -118,6 +127,8 @@ extern void omap_serial_wake_trigger(int enable);
 #define omap_serial_wake_trigger(x)	{}
 #endif	/* CONFIG_OMAP_SERIAL_WAKE */
 
+extern unsigned int omap730_cpu_suspend_sz;
+extern unsigned int omap730_idle_loop_suspend_sz;
 extern unsigned int omap1510_cpu_suspend_sz;
 extern unsigned int omap1510_idle_loop_suspend_sz;
 extern unsigned int omap1610_cpu_suspend_sz;
@@ -131,6 +142,10 @@ extern unsigned int omap1610_idle_loop_suspend_sz;
 #define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
 #define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
 
+#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x))
+#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]
+
 #define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
 #define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
 #define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]
@@ -188,13 +203,34 @@ enum mpui1510_save_state {
 	MPUI1510_SLEEP_SAVE_EMIFS_CONFIG,
 	MPUI1510_SLEEP_SAVE_OMAP_IH1_MIR,
 	MPUI1510_SLEEP_SAVE_OMAP_IH2_MIR,
-#if defined(CONFIG_ARCH_OMAP1510)
+#if defined(CONFIG_ARCH_OMAP15XX)
 	MPUI1510_SLEEP_SAVE_SIZE
 #else
 	MPUI1510_SLEEP_SAVE_SIZE = 0
 #endif
 };
 
+enum mpui730_save_state {
+	MPUI730_SLEEP_SAVE_START = 0,
+	/*
+	 * MPUI registers 32 bits
+	 */
+	MPUI730_SLEEP_SAVE_MPUI_CTRL,
+	MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+	MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+	MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS,
+	MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+	MPUI730_SLEEP_SAVE_EMIFS_CONFIG,
+	MPUI730_SLEEP_SAVE_OMAP_IH1_MIR,
+	MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR,
+	MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR,
+#if defined(CONFIG_ARCH_OMAP730)
+	MPUI730_SLEEP_SAVE_SIZE
+#else
+	MPUI730_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
 enum mpui1610_save_state {
 	MPUI1610_SLEEP_SAVE_START = 0,
 	/*

include/asm-arm/arch-omap/prcm.h

+/*
+ * prcm.h - Access definations for use in OMAP24XX clock and power management
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_DPM_PRCM_H
+#define __ASM_ARM_ARCH_DPM_PRCM_H
+
+/* SET_PERFORMANCE_LEVEL PARAMETERS */
+#define PRCM_HALF_SPEED 1
+#define PRCM_FULL_SPEED 2
+
+#ifndef __ASSEMBLER__
+
+#define PRCM_REG32(offset)	__REG32(OMAP24XX_PRCM_BASE + (offset))
+
+#define PRCM_REVISION		PRCM_REG32(0x000)
+#define PRCM_SYSCONFIG		PRCM_REG32(0x010)
+#define PRCM_IRQSTATUS_MPU	PRCM_REG32(0x018)
+#define PRCM_IRQENABLE_MPU	PRCM_REG32(0x01C)
+#define PRCM_VOLTCTRL		PRCM_REG32(0x050)
+#define PRCM_VOLTST		PRCM_REG32(0x054)
+#define PRCM_CLKSRC_CTRL	PRCM_REG32(0x060)
+#define PRCM_CLKOUT_CTRL	PRCM_REG32(0x070)
+#define PRCM_CLKEMUL_CTRL	PRCM_REG32(0x078)
+#define PRCM_CLKCFG_CTRL	PRCM_REG32(0x080)
+#define PRCM_CLKCFG_STATUS	PRCM_REG32(0x084)
+#define PRCM_VOLTSETUP		PRCM_REG32(0x090)
+#define PRCM_CLKSSETUP		PRCM_REG32(0x094)
+#define PRCM_POLCTRL		PRCM_REG32(0x098)
+
+/* GENERAL PURPOSE */
+#define GENERAL_PURPOSE1	PRCM_REG32(0x0B0)
+#define GENERAL_PURPOSE2	PRCM_REG32(0x0B4)
+#define GENERAL_PURPOSE3	PRCM_REG32(0x0B8)
+#define GENERAL_PURPOSE4	PRCM_REG32(0x0BC)
+#define GENERAL_PURPOSE5	PRCM_REG32(0x0C0)
+#define GENERAL_PURPOSE6	PRCM_REG32(0x0C4)
+#define GENERAL_PURPOSE7	PRCM_REG32(0x0C8)
+#define GENERAL_PURPOSE8	PRCM_REG32(0x0CC)
+#define GENERAL_PURPOSE9	PRCM_REG32(0x0D0)
+#define GENERAL_PURPOSE10	PRCM_REG32(0x0D4)
+#define GENERAL_PURPOSE11	PRCM_REG32(0x0D8)
+#define GENERAL_PURPOSE12	PRCM_REG32(0x0DC)
+#define GENERAL_PURPOSE13	PRCM_REG32(0x0E0)
+#define GENERAL_PURPOSE14	PRCM_REG32(0x0E4)
+#define GENERAL_PURPOSE15	PRCM_REG32(0x0E8)
+#define GENERAL_PURPOSE16	PRCM_REG32(0x0EC)
+#define GENERAL_PURPOSE17	PRCM_REG32(0x0F0)
+#define GENERAL_PURPOSE18	PRCM_REG32(0x0F4)
+#define GENERAL_PURPOSE19	PRCM_REG32(0x0F8)
+#define GENERAL_PURPOSE20	PRCM_REG32(0x0FC)
+
+/* MPU */
+#define CM_CLKSEL_MPU		PRCM_REG32(0x140)
+#define CM_CLKSTCTRL_MPU	PRCM_REG32(0x148)
+#define RM_RSTST_MPU		PRCM_REG32(0x158)
+#define PM_WKDEP_MPU		PRCM_REG32(0x1C8)
+#define PM_EVGENCTRL_MPU	PRCM_REG32(0x1D4)
+#define PM_EVEGENONTIM_MPU	PRCM_REG32(0x1D8)
+#define PM_EVEGENOFFTIM_MPU	PRCM_REG32(0x1DC)
+#define PM_PWSTCTRL_MPU		PRCM_REG32(0x1E0)
+#define PM_PWSTST_MPU		PRCM_REG32(0x1E4)
+
+/* CORE */
+#define CM_FCLKEN1_CORE		PRCM_REG32(0x200)
+#define CM_FCLKEN2_CORE		PRCM_REG32(0x204)
+#define CM_FCLKEN3_CORE		PRCM_REG32(0x208)
+#define CM_ICLKEN1_CORE		PRCM_REG32(0x210)
+#define CM_ICLKEN2_CORE		PRCM_REG32(0x214)
+#define CM_ICLKEN3_CORE		PRCM_REG32(0x218)
+#define CM_ICLKEN4_CORE		PRCM_REG32(0x21C)
+#define CM_IDLEST1_CORE		PRCM_REG32(0x220)
+#define CM_IDLEST2_CORE		PRCM_REG32(0x224)
+#define CM_IDLEST3_CORE		PRCM_REG32(0x228)
+#define CM_IDLEST4_CORE		PRCM_REG32(0x22C)
+#define CM_AUTOIDLE1_CORE	PRCM_REG32(0x230)
+#define CM_AUTOIDLE2_CORE	PRCM_REG32(0x234)
+#define CM_AUTOIDLE3_CORE	PRCM_REG32(0x238)
+#define CM_AUTOIDLE4_CORE	PRCM_REG32(0x23C)
+#define CM_CLKSEL1_CORE		PRCM_REG32(0x240)
+#define CM_CLKSEL2_CORE		PRCM_REG32(0x244)
+#define CM_CLKSTCTRL_CORE	PRCM_REG32(0x248)
+#define PM_WKEN1_CORE		PRCM_REG32(0x2A0)
+#define PM_WKEN2_CORE		PRCM_REG32(0x2A4)
+#define PM_WKST1_CORE		PRCM_REG32(0x2B0)
+#define PM_WKST2_CORE		PRCM_REG32(0x2B4)
+#define PM_WKDEP_CORE		PRCM_REG32(0x2C8)
+#define PM_PWSTCTRL_CORE	PRCM_REG32(0x2E0)
+#define PM_PWSTST_CORE		PRCM_REG32(0x2E4)
+
+/* GFX */
+#define CM_FCLKEN_GFX		PRCM_REG32(0x300)
+#define CM_ICLKEN_GFX		PRCM_REG32(0x310)
+#define CM_IDLEST_GFX		PRCM_REG32(0x320)
+#define CM_CLKSEL_GFX		PRCM_REG32(0x340)
+#define CM_CLKSTCTRL_GFX	PRCM_REG32(0x348)
+#define RM_RSTCTRL_GFX		PRCM_REG32(0x350)
+#define RM_RSTST_GFX		PRCM_REG32(0x358)
+#define PM_WKDEP_GFX		PRCM_REG32(0x3C8)
+#define PM_PWSTCTRL_GFX		PRCM_REG32(0x3E0)
+#define PM_PWSTST_GFX		PRCM_REG32(0x3E4)
+
+/* WAKE-UP */
+#define CM_FCLKEN_WKUP		PRCM_REG32(0x400)
+#define CM_ICLKEN_WKUP		PRCM_REG32(0x410)
+#define CM_IDLEST_WKUP		PRCM_REG32(0x420)
+#define CM_AUTOIDLE_WKUP	PRCM_REG32(0x430)
+#define CM_CLKSEL_WKUP		PRCM_REG32(0x440)
+#define RM_RSTCTRL_WKUP		PRCM_REG32(0x450)
+#define RM_RSTTIME_WKUP		PRCM_REG32(0x454)
+#define RM_RSTST_WKUP		PRCM_REG32(0x458)
+#define PM_WKEN_WKUP		PRCM_REG32(0x4A0)
+#define PM_WKST_WKUP		PRCM_REG32(0x4B0)
+
+/* CLOCKS */
+#define CM_CLKEN_PLL		PRCM_REG32(0x500)
+#define CM_IDLEST_CKGEN		PRCM_REG32(0x520)
+#define CM_AUTOIDLE_PLL		PRCM_REG32(0x530)
+#define CM_CLKSEL1_PLL		PRCM_REG32(0x540)
+#define CM_CLKSEL2_PLL		PRCM_REG32(0x544)
+
+/* DSP */
+#define CM_FCLKEN_DSP		PRCM_REG32(0x800)
+#define CM_ICLKEN_DSP		PRCM_REG32(0x810)
+#define CM_IDLEST_DSP		PRCM_REG32(0x820)
+#define CM_AUTOIDLE_DSP		PRCM_REG32(0x830)
+#define CM_CLKSEL_DSP		PRCM_REG32(0x840)
+#define CM_CLKSTCTRL_DSP	PRCM_REG32(0x848)
+#define RM_RSTCTRL_DSP		PRCM_REG32(0x850)
+#define RM_RSTST_DSP		PRCM_REG32(0x858)
+#define PM_WKEN_DSP		PRCM_REG32(0x8A0)
+#define PM_WKDEP_DSP		PRCM_REG32(0x8C8)
+#define PM_PWSTCTRL_DSP		PRCM_REG32(0x8E0)
+#define PM_PWSTST_DSP		PRCM_REG32(0x8E4)
+#define PRCM_IRQSTATUS_DSP	PRCM_REG32(0x8F0)
+#define PRCM_IRQENABLE_DSP	PRCM_REG32(0x8F4)
+
+/* IVA */
+#define PRCM_IRQSTATUS_IVA	PRCM_REG32(0x8F8)
+#define PRCM_IRQENABLE_IVA	PRCM_REG32(0x8FC)
+
+/* Modem on 2430 */
+#define CM_FCLKEN_MDM		PRCM_REG32(0xC00)
+#define CM_ICLKEN_MDM		PRCM_REG32(0xC10)
+#define CM_IDLEST_MDM		PRCM_REG32(0xC20)
+#define CM_CLKSEL_MDM		PRCM_REG32(0xC40)
+
+/* FIXME: Move to header for 2430 */
+#define DISP_BASE		(OMAP24XX_L4_IO_BASE+0x50000)
+#define DISP_REG32(offset)	__REG32(DISP_BASE + (offset))
+
+#define OMAP24XX_GPMC_BASE	(L3_24XX_BASE + 0xa000)
+#define GPMC_BASE		(OMAP24XX_GPMC_BASE)
+#define GPMC_REG32(offset)	__REG32(GPMC_BASE + (offset))
+
+#define GPT1_BASE		(OMAP24XX_GPT1)
+#define GPT1_REG32(offset)	__REG32(GPT1_BASE + (offset))
+
+/* Misc sysconfig */
+#define DISPC_SYSCONFIG		DISP_REG32(0x410)
+#define SPI_BASE		(OMAP24XX_L4_IO_BASE+0x98000)
+#define MCSPI1_SYSCONFIG	__REG32(SPI_BASE + 0x10)
+#define MCSPI2_SYSCONFIG	__REG32(SPI_BASE+0x2000 + 0x10)
+
+//#define DSP_MMU_SYSCONFIG	0x5A000010
+#define CAMERA_MMU_SYSCONFIG	__REG32(DISP_BASE+0x2C10)
+//#define IVA_MMU_SYSCONFIG	0x5D000010
+//#define DSP_DMA_SYSCONFIG	0x00FCC02C
+#define CAMERA_DMA_SYSCONFIG	__REG32(DISP_BASE+0x282C)
+#define SYSTEM_DMA_SYSCONFIG	__REG32(DISP_BASE+0x602C)
+#define GPMC_SYSCONFIG		GPMC_REG32(0x010)
+#define MAILBOXES_SYSCONFIG	__REG32(OMAP24XX_L4_IO_BASE+0x94010)
+#define UART1_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE+0x6A054)
+#define UART2_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE+0x6C054)
+#define UART3_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE+0x6E054)
+//#define IVA_SYSCONFIG		0x5C060010
+#define SDRC_SYSCONFIG		__REG32(OMAP24XX_SDRC_BASE+0x10)
+#define SMS_SYSCONFIG		__REG32(OMAP24XX_SMS_BASE+0x10)
+#define SSI_SYSCONFIG		__REG32(DISP_BASE+0x8010)
+//#define VLYNQ_SYSCONFIG	0x67FFFE10
+
+/* rkw - good cannidates for PM_ to start what nm was trying */
+#define OMAP24XX_GPT2		(OMAP24XX_L4_IO_BASE+0x2A000)
+#define OMAP24XX_GPT3		(OMAP24XX_L4_IO_BASE+0x78000)
+#define OMAP24XX_GPT4		(OMAP24XX_L4_IO_BASE+0x7A000)
+#define OMAP24XX_GPT5		(OMAP24XX_L4_IO_BASE+0x7C000)
+#define OMAP24XX_GPT6		(OMAP24XX_L4_IO_BASE+0x7E000)
+#define OMAP24XX_GPT7		(OMAP24XX_L4_IO_BASE+0x80000)
+#define OMAP24XX_GPT8		(OMAP24XX_L4_IO_BASE+0x82000)
+#define OMAP24XX_GPT9		(OMAP24XX_L4_IO_BASE+0x84000)
+#define OMAP24XX_GPT10		(OMAP24XX_L4_IO_BASE+0x86000)
+#define OMAP24XX_GPT11		(OMAP24XX_L4_IO_BASE+0x88000)
+#define OMAP24XX_GPT12		(OMAP24XX_L4_IO_BASE+0x8A000)
+
+#define GPTIMER1_SYSCONFIG	GPT1_REG32(0x010)
+#define GPTIMER2_SYSCONFIG	__REG32(OMAP24XX_GPT2 + 0x10)
+#define GPTIMER3_SYSCONFIG	__REG32(OMAP24XX_GPT3 + 0x10)
+#define GPTIMER4_SYSCONFIG	__REG32(OMAP24XX_GPT4 + 0x10)
+#define GPTIMER5_SYSCONFIG	__REG32(OMAP24XX_GPT5 + 0x10)
+#define GPTIMER6_SYSCONFIG	__REG32(OMAP24XX_GPT6 + 0x10)
+#define GPTIMER7_SYSCONFIG	__REG32(OMAP24XX_GPT7 + 0x10)
+#define GPTIMER8_SYSCONFIG	__REG32(OMAP24XX_GPT8 + 0x10)
+#define GPTIMER9_SYSCONFIG	__REG32(OMAP24XX_GPT9 + 0x10)
+#define GPTIMER10_SYSCONFIG	__REG32(OMAP24XX_GPT10 + 0x10)
+#define GPTIMER11_SYSCONFIG	__REG32(OMAP24XX_GPT11 + 0x10)
+#define GPTIMER12_SYSCONFIG	__REG32(OMAP24XX_GPT12 + 0x10)
+
+#define GPIOX_BASE(X)		(OMAP24XX_GPIO_BASE+(0x2000*((X)-1)))
+
+#define GPIO1_SYSCONFIG		__REG32((GPIOX_BASE(1)+0x10))
+#define GPIO2_SYSCONFIG		__REG32((GPIOX_BASE(2)+0x10))
+#define GPIO3_SYSCONFIG		__REG32((GPIOX_BASE(3)+0x10))
+#define GPIO4_SYSCONFIG		__REG32((GPIOX_BASE(4)+0x10))
+
+/* GP TIMER 1 */
+#define GPTIMER1_TISTAT		GPT1_REG32(0x014)
+#define GPTIMER1_TISR		GPT1_REG32(0x018)
+#define GPTIMER1_TIER		GPT1_REG32(0x01C)
+#define GPTIMER1_TWER		GPT1_REG32(0x020)
+#define GPTIMER1_TCLR		GPT1_REG32(0x024)
+#define GPTIMER1_TCRR		GPT1_REG32(0x028)
+#define GPTIMER1_TLDR		GPT1_REG32(0x02C)
+#define GPTIMER1_TTGR		GPT1_REG32(0x030)
+#define GPTIMER1_TWPS		GPT1_REG32(0x034)
+#define GPTIMER1_TMAR		GPT1_REG32(0x038)
+#define GPTIMER1_TCAR1		GPT1_REG32(0x03C)
+#define GPTIMER1_TSICR		GPT1_REG32(0x040)
+#define GPTIMER1_TCAR2		GPT1_REG32(0x044)
+
+/* rkw -- base fix up please... */
+#define GPTIMER3_TISR		__REG32(OMAP24XX_L4_IO_BASE+0x78018)
+
+/* SDRC */
+#define SDRC_DLLA_CTRL		__REG32(OMAP24XX_SDRC_BASE+0x060)
+#define SDRC_DLLA_STATUS	__REG32(OMAP24XX_SDRC_BASE+0x064)
+#define SDRC_DLLB_CTRL		__REG32(OMAP24XX_SDRC_BASE+0x068)
+#define SDRC_DLLB_STATUS	__REG32(OMAP24XX_SDRC_BASE+0x06C)
+#define SDRC_POWER		__REG32(OMAP24XX_SDRC_BASE+0x070)
+#define SDRC_MR_0		__REG32(OMAP24XX_SDRC_BASE+0x084)
+
+/* GPIO 1 */
+#define GPIO1_BASE		GPIOX_BASE(1)
+#define GPIO1_REG32(offset)	__REG32(GPIO1_BASE + (offset))
+#define GPIO1_IRQENABLE1	GPIO1_REG32(0x01C)
+#define GPIO1_IRQSTATUS1	GPIO1_REG32(0x018)
+#define GPIO1_IRQENABLE2	GPIO1_REG32(0x02C)
+#define GPIO1_IRQSTATUS2	GPIO1_REG32(0x028)
+#define GPIO1_WAKEUPENABLE	GPIO1_REG32(0x020)
+#define GPIO1_RISINGDETECT	GPIO1_REG32(0x048)
+#define GPIO1_DATAIN		GPIO1_REG32(0x038)
+#define GPIO1_OE		GPIO1_REG32(0x034)
+#define GPIO1_DATAOUT		GPIO1_REG32(0x03C)
+
+/* GPIO2 */
+#define GPIO2_BASE		GPIOX_BASE(2)
+#define GPIO2_REG32(offset)	__REG32(GPIO2_BASE + (offset))
+#define GPIO2_IRQENABLE1	GPIO2_REG32(0x01C)
+#define GPIO2_IRQSTATUS1	GPIO2_REG32(0x018)
+#define GPIO2_IRQENABLE2	GPIO2_REG32(0x02C)
+#define GPIO2_IRQSTATUS2	GPIO2_REG32(0x028)
+#define GPIO2_WAKEUPENABLE	GPIO2_REG32(0x020)
+#define GPIO2_RISINGDETECT	GPIO2_REG32(0x048)
+#define GPIO2_DATAIN		GPIO2_REG32(0x038)
+#define GPIO2_OE		GPIO2_REG32(0x034)
+#define GPIO2_DATAOUT		GPIO2_REG32(0x03C)
+
+/* GPIO 3 */
+#define GPIO3_BASE		GPIOX_BASE(3)
+#define GPIO3_REG32(offset)	__REG32(GPIO3_BASE + (offset))
+#define GPIO3_IRQENABLE1	GPIO3_REG32(0x01C)
+#define GPIO3_IRQSTATUS1	GPIO3_REG32(0x018)
+#define GPIO3_IRQENABLE2	GPIO3_REG32(0x02C)
+#define GPIO3_IRQSTATUS2	GPIO3_REG32(0x028)
+#define GPIO3_WAKEUPENABLE	GPIO3_REG32(0x020)
+#define GPIO3_RISINGDETECT	GPIO3_REG32(0x048)
+#define GPIO3_FALLINGDETECT	GPIO3_REG32(0x04C)
+#define GPIO3_DATAIN		GPIO3_REG32(0x038)
+#define GPIO3_OE		GPIO3_REG32(0x034)
+#define GPIO3_DATAOUT		GPIO3_REG32(0x03C)
+#define GPIO3_DEBOUNCENABLE	GPIO3_REG32(0x050)
+#define GPIO3_DEBOUNCINGTIME	GPIO3_REG32(0x054)
+
+/* GPIO 4 */
+#define GPIO4_BASE		GPIOX_BASE(4)
+#define GPIO4_REG32(offset)	__REG32(GPIO4_BASE + (offset))
+#define GPIO4_IRQENABLE1	GPIO4_REG32(0x01C)
+#define GPIO4_IRQSTATUS1	GPIO4_REG32(0x018)
+#define GPIO4_IRQENABLE2	GPIO4_REG32(0x02C)
+#define GPIO4_IRQSTATUS2	GPIO4_REG32(0x028)
+#define GPIO4_WAKEUPENABLE	GPIO4_REG32(0x020)
+#define GPIO4_RISINGDETECT	GPIO4_REG32(0x048)
+#define GPIO4_FALLINGDETECT	GPIO4_REG32(0x04C)
+#define GPIO4_DATAIN		GPIO4_REG32(0x038)
+#define GPIO4_OE		GPIO4_REG32(0x034)
+#define GPIO4_DATAOUT		GPIO4_REG32(0x03C)
+#define GPIO4_DEBOUNCENABLE	GPIO4_REG32(0x050)
+#define GPIO4_DEBOUNCINGTIME	GPIO4_REG32(0x054)
+
+
+/* IO CONFIG */
+#define CONTROL_BASE		(OMAP24XX_CTRL_BASE)
+#define CONTROL_REG32(offset)	__REG32(CONTROL_BASE + (offset))
+
+#define CONTROL_PADCONF_SPI1_NCS2	CONTROL_REG32(0x104)
+#define CONTROL_PADCONF_SYS_XTALOUT	CONTROL_REG32(0x134)
+#define CONTROL_PADCONF_UART1_RX	CONTROL_REG32(0x0C8)
+#define CONTROL_PADCONF_MCBSP1_DX	CONTROL_REG32(0x10C)
+#define CONTROL_PADCONF_GPMC_NCS4	CONTROL_REG32(0x090)
+#define CONTROL_PADCONF_DSS_D5		CONTROL_REG32(0x0B8)
+#define CONTROL_PADCONF_DSS_D9		CONTROL_REG32(0x0BC)
+#define CONTROL_PADCONF_DSS_D13		CONTROL_REG32(0x0C0)
+#define CONTROL_PADCONF_DSS_VSYNC	CONTROL_REG32(0x0CC)
+
+/* CONTROL */
+#define CONTROL_DEVCONF		CONTROL_REG32(0x274)
+
+/* INTERRUPT CONTROLLER */
+#define INTC_BASE		(OMAP24XX_L4_IO_BASE+0xfe000)
+#define INTC_REG32(offset)	__REG32(INTC_BASE + (offset))
+
+#define INTC1_U_BASE		INTC_REG32(0x000)
+#define INTC_MIR0		INTC_REG32(0x084)
+#define INTC_MIR_SET0		INTC_REG32(0x08C)
+#define INTC_MIR_CLEAR0		INTC_REG32(0x088)
+#define INTC_ISR_CLEAR0		INTC_REG32(0x094)
+#define INTC_MIR1		INTC_REG32(0x0A4)
+#define INTC_MIR_SET1		INTC_REG32(0x0AC)
+#define INTC_MIR_CLEAR1		INTC_REG32(0x0A8)
+#define INTC_ISR_CLEAR1		INTC_REG32(0x0B4)
+#define INTC_MIR2		INTC_REG32(0x0C4)
+#define INTC_MIR_SET2		INTC_REG32(0x0CC)
+#define INTC_MIR_CLEAR2		INTC_REG32(0x0C8)
+#define INTC_ISR_CLEAR2		INTC_REG32(0x0D4)
+#define INTC_SIR_IRQ		INTC_REG32(0x040)
+#define INTC_CONTROL		INTC_REG32(0x048)
+#define INTC_ILR11		INTC_REG32(0x12C)
+#define INTC_ILR32		INTC_REG32(0x180)
+#define INTC_ILR37		INTC_REG32(0x194)
+#define INTC_SYSCONFIG		INTC_REG32(0x010)
+
+/* RAM FIREWALL */
+#define RAMFW_BASE		(0x68005000)
+#define RAMFW_REG32(offset)	__REG32(RAMFW_BASE + (offset))
+
+#define RAMFW_REQINFOPERM0	RAMFW_REG32(0x048)
+#define RAMFW_READPERM0		RAMFW_REG32(0x050)
+#define RAMFW_WRITEPERM0	RAMFW_REG32(0x058)
+
+/* GPMC CS1 FPGA ON USER INTERFACE MODULE */
+//#define DEBUG_BOARD_LED_REGISTER 0x04000014
+
+/* GPMC CS0 */
+#define GPMC_CONFIG1_0		GPMC_REG32(0x060)
+#define GPMC_CONFIG2_0		GPMC_REG32(0x064)
+#define GPMC_CONFIG3_0		GPMC_REG32(0x068)
+#define GPMC_CONFIG4_0		GPMC_REG32(0x06C)
+#define GPMC_CONFIG5_0		GPMC_REG32(0x070)
+#define GPMC_CONFIG6_0		GPMC_REG32(0x074)
+#define GPMC_CONFIG7_0		GPMC_REG32(0x078)
+
+/* GPMC CS1 */
+#define GPMC_CONFIG1_1		GPMC_REG32(0x090)
+#define GPMC_CONFIG2_1		GPMC_REG32(0x094)
+#define GPMC_CONFIG3_1		GPMC_REG32(0x098)
+#define GPMC_CONFIG4_1		GPMC_REG32(0x09C)
+#define GPMC_CONFIG5_1		GPMC_REG32(0x0a0)
+#define GPMC_CONFIG6_1		GPMC_REG32(0x0a4)
+#define GPMC_CONFIG7_1		GPMC_REG32(0x0a8)
+
+/* DSS */
+#define DSS_CONTROL		DISP_REG32(0x040)
+#define DISPC_CONTROL		DISP_REG32(0x440)
+#define DISPC_SYSSTATUS		DISP_REG32(0x414)
+#define DISPC_IRQSTATUS		DISP_REG32(0x418)
+#define DISPC_IRQENABLE		DISP_REG32(0x41C)
+#define DISPC_CONFIG		DISP_REG32(0x444)
+#define DISPC_DEFAULT_COLOR0	DISP_REG32(0x44C)
+#define DISPC_DEFAULT_COLOR1	DISP_REG32(0x450)
+#define DISPC_TRANS_COLOR0	DISP_REG32(0x454)
+#define DISPC_TRANS_COLOR1	DISP_REG32(0x458)
+#define DISPC_LINE_NUMBER	DISP_REG32(0x460)
+#define DISPC_TIMING_H		DISP_REG32(0x464)
+#define DISPC_TIMING_V		DISP_REG32(0x468)
+#define DISPC_POL_FREQ		DISP_REG32(0x46C)
+#define DISPC_DIVISOR		DISP_REG32(0x470)
+#define DISPC_SIZE_DIG		DISP_REG32(0x478)
+#define DISPC_SIZE_LCD		DISP_REG32(0x47C)
+#define DISPC_GFX_BA0		DISP_REG32(0x480)
+#define DISPC_GFX_BA1		DISP_REG32(0x484)
+#define DISPC_GFX_POSITION	DISP_REG32(0x488)
+#define DISPC_GFX_SIZE		DISP_REG32(0x48C)
+#define DISPC_GFX_ATTRIBUTES	DISP_REG32(0x4A0)
+#define DISPC_GFX_FIFO_THRESHOLD	DISP_REG32(0x4A4)
+#define DISPC_GFX_ROW_INC	DISP_REG32(0x4AC)
+#define DISPC_GFX_PIXEL_INC	DISP_REG32(0x4B0)
+#define DISPC_GFX_WINDOW_SKIP	DISP_REG32(0x4B4)
+#define DISPC_GFX_TABLE_BA	DISP_REG32(0x4B8)
+#define DISPC_DATA_CYCLE1	DISP_REG32(0x5D4)
+#define DISPC_DATA_CYCLE2	DISP_REG32(0x5D8)
+#define DISPC_DATA_CYCLE3	DISP_REG32(0x5DC)
+
+/* Wake up define for board */
+#define GPIO97			(1 << 1)
+#define GPIO88			(1 << 24)
+
+#endif /* __ASSEMBLER__ */
+
+#endif
+
+
+
+
+

include/asm-arm/arch-omap/sram.h

+/*
+ * linux/include/asm-arm/arch-omap/sram.h
+ *
+ * Interface for functions that need to be run in internal SRAM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_SRAM_H
+#define __ARCH_ARM_OMAP_SRAM_H
+
+extern void * omap_sram_push(void * start, unsigned long size);
+extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
+
+extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+				u32 base_cs, u32 force_unlock);
+extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+				      u32 mem_type);
+extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+
+
+/* Do not use these */
+extern void sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long sram_reprogram_clock_sz;
+
+extern void sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+			  u32 base_cs, u32 force_unlock);
+extern unsigned long sram_ddr_init_sz;
+
+extern u32 sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+extern unsigned long sram_set_prcm_sz;
+
+extern void sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type);
+extern unsigned long sram_reprogram_sdrc_sz;
+
+#endif

include/asm-arm/arch-omap/system.h

@@ -6,18 +6,21 @@
 #define __ASM_ARCH_SYSTEM_H
 #include <linux/config.h>
 #include <asm/mach-types.h>
+#include <asm/hardware/clock.h>
 #include <asm/arch/hardware.h>
-#include <asm/mach-types.h>
+#include <asm/arch/prcm.h>
+
+#ifndef CONFIG_MACH_VOICEBLUE
+#define voiceblue_reset()		do {} while (0)
+#endif
 
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void omap1_arch_reset(char mode)
 {
-
-#ifdef CONFIG_ARCH_OMAP16XX
 	/*
 	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
 	 * "Global Software Reset Affects Traffic Controller Frequency".
@@ -27,13 +30,31 @@ static inline void arch_reset(char mode)
 				 DPLL_CTL);
 		omap_writew(0x8, ARM_RSTCT1);
 	}
-#endif
-#ifdef CONFIG_MACH_VOICEBLUE
+
 	if (machine_is_voiceblue())
 		voiceblue_reset();
 	else
-#endif
 		omap_writew(1, ARM_RSTCT1);
 }
 
+static inline void omap2_arch_reset(char mode)
+{
+	u32 rate;
+	struct clk *vclk, *sclk;
+
+	vclk = clk_get(NULL, "virt_prcm_set");
+	sclk = clk_get(NULL, "sys_ck");
+	rate = clk_get_rate(sclk);
+	clk_set_rate(vclk, rate);	/* go to bypass for OMAP limitation */
+	RM_RSTCTRL_WKUP |= 2;
+}
+
+static inline void arch_reset(char mode)
+{
+	if (!cpu_is_omap24xx())
+		omap1_arch_reset(mode);
+	else
+		omap2_arch_reset(mode);
+}
+
 #endif

include/asm-arm/arch-omap/timex.h

@@ -28,6 +28,14 @@
 #if !defined(__ASM_ARCH_OMAP_TIMEX_H)
 #define __ASM_ARCH_OMAP_TIMEX_H
 
+/*
+ * OMAP 32KHz timer updates time one jiffie at a time from a secondary timer,
+ * and that's why the CLOCK_TICK_RATE is not 32768.
+ */
+#ifdef CONFIG_OMAP_32K_TIMER
+#define CLOCK_TICK_RATE		(CONFIG_OMAP_32K_TIMER_HZ)
+#else
 #define CLOCK_TICK_RATE		(HZ * 100000UL)
+#endif
 
 #endif /* __ASM_ARCH_OMAP_TIMEX_H */

include/asm-arm/arch-omap/uncompress.h

@@ -36,10 +36,14 @@ putstr(const char *s)
 	volatile u8 * uart = 0;
 	int shift = 2;
 
+#ifdef CONFIG_MACH_OMAP_PALMTE
+	return;
+#endif
+
 #ifdef CONFIG_ARCH_OMAP
 #ifdef	CONFIG_OMAP_LL_DEBUG_UART3
 	uart = (volatile u8 *)(OMAP_UART3_BASE);
-#elif	CONFIG_OMAP_LL_DEBUG_UART2
+#elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
 	uart = (volatile u8 *)(OMAP_UART2_BASE);
 #else
 	uart = (volatile u8 *)(OMAP_UART1_BASE);